22ESC141
22ESC141
22ESC141
Teaching-Learning Process
These are sample Strategies; which teachers can use to accelerate the attainment of the various
course outcomes.
1. Lecture method (L) does not mean only the traditional lecture method, but a different type of
teaching method may be adopted to develop the outcomes.
2. Arrange visits to nearby sites to give brief information about the Civil Engineering structures.
3. Show Video/animation films to explain the infrastructures and the mechanism involved in the
principle.
4. Encourage collaborative (Group) Learning in the class.
5. Ask at least three HOT (Higher-order Thinking) questions in the class, which promotes critical
thinking.
6. Adopt Problem Based Learning (PBL), which fosters students’ Analytical skills, develop
thinking skills such as the ability to evaluate, generalize, and analyze information rather than
simply recall it.
7. Topics will be introduced in multiple representations.
8. Show the different ways to solve the same problem and encourage the students to come up
with their own creative ways to solve them.
9. Discuss how every concept can be applied to the real world - and when that's possible, it helps
improve the students' understanding.
10. Individual teachers can device innovative pedagogy to improve teaching-learning.
Module-1 (10)
Civil Engineering Disciplines and Building Science
Introduction to Civil Engineering: Surveying, Structural Engineering, Geotechnical Engineering,
Hydraulics & Water Resources, Transportation Engineering, Environmental Engineering,
Construction planning & Project management.
Basic Materials of Construction: Bricks, Cement & mortars, Plain, Reinforced & Pre-stressed
Concrete, Structural steel, Construction Chemicals.
Structural elements of a building: foundation, plinth, lintel, chejja, Masonry wall, column, beam,
slab and staircase
Module-2 (10)
Societal and Global Impact of Infrastructure
Infrastructure: Introduction to sustainable development goals, Smart city concept, clean city
1
concept, Safe city concept
Environment: Water Supply and Sanitary systems, urban air pollution management, Solid waste
management, identification of Landfill sites, urban flood control
Built-environment: Energy efficient buildings, recycling, Temperature and Sound control in
buildings, Security systems; Smart buildings.
Module-3(10)
Analysis of force systems: Concept of idealization, system of forces, principles of superposition
and transmissibility, Resolution and composition of forces, Law of Parallelogram of forces,
Resultant of concurrent and non-concurrent coplanar force systems, moment of forces, couple,
Varignon’s theorem, free body diagram, equations of equilibrium, equilibrium of concurrent and
non-concurrent coplanar force systems
Module-4(10)
Centroid: Importance of centroid and centre of gravity, methods of determining the centroid,
locating the centroid of plane laminae from first principles, centroid of built-up sections. Numerical
examples
Module-5 (10)
Moment of inertia: Importance of Moment of Inertia, method of determining the second moment of
area (moment of inertia) of plane sections from first principles, parallel axis theorem and
perpendicular axis theorem, section modulus, radius of gyration, moment of inertia of built-up
sections, Numerical Examples.
Course outcome (Course Skill Set)
At the end of the course the student will be able to:
CO1 Understand the various disciplines ofcivil engineering
CO2 Understand the infrastructure requirement for sustainable development
CO3 Compute the resultant and equilibrium of force systems.
CO4 Locate the centroid of plane and built-up sections
CO5 Compute the moment of inertia of plane and built-up sections.
2
Assessment Details (both CIE and SEE)
The weightage of Continuous Internal Evaluation (CIE) is 50% and for Semester End Exam (SEE) is 50%. The
minimum passing mark for the CIE is 40% of the maximum marks (20 marks out of 50). The minimum passing
mark for the SEE is 35% of the maximum marks (18 marks out of 50). A student shall be deemed to have satisfied
the academic requirements and earned the credits allotted to each subject/ course if the student secures not less
than 35% (18 Marks out of 50) in the semester-end examination (SEE), and a minimum of 40% (40 marks out of
100) in the sum total of the CIE (Continuous Internal Evaluation) and SEE (Semester End Examination) taken
together.
Continuous Internal Evaluation(CIE):
Two Unit Tests each of 30 Marks (duration 01 hour)
First test after the completion of 30-40 % of the syllabus
Second test after completion of 80-90% of the syllabus
One Improvement test before the closing of the academic term may be conducted if necessary. However best two
tests out of three shall be taken into consideration
Two assignments each of 20 Marks
The teacher has to plan the assignments and get them completed by the students well before the closing of the
term so that marks entry in the examination portal shall be done in time. Formative (Successive) Assessments
include Assignments/Quizzes/Seminars/ Course projects/Field surveys/ Case studies/ Hands-on practice
(experiments)/Group Discussions/ others. The Teachers shall choose the types of assignments depending on
the requirement of the course and plan to attain the Cos and POs. (to have a less stressed CIE, the portion of the
syllabus should not be common /repeated for any of the methods of the CIE. Each method of CIE should have a
different syllabus portion of the course). CIE methods /test question paper is designed to attain the different
levels of Bloom’s taxonomy as per the outcome defined for the course.
The sum of two tests, two assignments, will be out of 100 marks and will be scaled down to 50 marks
3
Web links and Video Lectures (e-Resources):
https://www.youtube.com/watch?v=nGfVTNfNwnk&list=PLOSWwFV98rfKXq2KBphJz95rao7q8PpwT
https://www.youtube.com/watch?v=nkg7VNW9UCc&list=PLOSWwFV98rfKXq2KBphJz95rao7q8PpwT&i
ndex=2
https://www.youtube.com/watch?v=ljDIIMvxeg&list=PLOSWwFV98rfKXq2KBphJz95rao7q
8PpwT&index=5
https://www.youtube.com/watch?v=VQRcChR9IkU&list=PLOSWwFV98rfKXq2KBphJz95r
ao7q8PpwT&index=18
https://www.youtube.com/watch?v=3YBXteL-qY4
https://www.youtube.com/watch?v=z95UW4wwzSc&list=PLOSWwFV98rfKXq2KBphJz95r
ao7q8PpwT&index=10
https://www.youtube.com/watch?v=lheoBL2QaqU&list=PLOSWwFV98rfKXq2KBphJz95rao
7q8PpwT&index=7
https://www.youtube.com/watch?v=atoP5_DeTPE
https://www.youtube.com/watch?v=ksmsp9OzAsI
https://www.youtube.com/watch?v=x1ef048b3CE
https://www.youtube.com/watch?v=l_Nck-X49qc
https://play.google.com/store/apps/details?id=appinventor.ai_jgarc322.Resultant_Force
https://www.youtube.com/watch?v=RIBeeW1DSZg
https://www.youtube.com/watch?v=R8wKV0UQtlo
https://www.youtube.com/watch?v=0RZHHgL8m_A
https://www.youtube.com/watch?v=Bls5KnQOWkY