Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

A11vo 2

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

AA11VO

High Pressure Variable Displacement


Pump for Open Circuit Operation
1 AA11VO – The Leading Drive Hydraulics. High pressure variable displacement pump
for hydrostatic drives in industrial applications, open circuit operation.

The Leading Technology for


Industrial Applications

Type A11VO A11VLO


Size 40...260 130...260
Type A20VO A20VLO
Size 60...130 130...260
Axial piston swashplate design
Series 1
Nominal pressure:
5100 PSI (350 bar)
(A20VO60: 250/315 bar)
Peak pressure:
5800 PSI (400 bar)
For more information see:
RE 92500 (A11V)
RE 93100 (A20V)

AA11VO – High pressure through drive, or as an A20VO electronic components, the user is
variable displacement pump for double pump in back to back assured of the optimum pump
open circuit operation design, broaden the field of appli- matched exactly to his require-
The A11VO variable displacement cations, while at the same time ments—and all from one source.
pump is a high pressure pump and dispensing with the need for
With individually designed, user-
is used chiefly for exacting hydro- mechanical splitter boxes.
optimized systems, Rexroth
static drives in mobile devices,
With the associated open and guarantees economical, reliable
machines and vehicles.
closed loop controls and the and powerful hydrostatic drives.
Versions of this pump, either as a Rexroth fixed and variable
combination pump with gear or displacement motors, as well as
axial piston pumps built onto the cylinders and other hydraulic and
AA11VO 2

The Pioneering and


Market-Oriented Design
A11VO High pressure variable Versions
displacement pump In addition to the standard version,
• Axial piston swashplate design a charge pump is preferred for the
• Open loop hydraulic circuit upper size range (Size 130...260).
• Self-priming or with tank The installed "impeller" achieves
pressurization even higher speeds and hence an
• Choice of charge pump improved performance.
(impeller) Combination pump:
• SAE suction and pressure port All A11V pumps have a thru-shaft
• SAE mounting flange and rear coverplate. Any thru-drive Application areas (examples)
• SAE diesel motor flange type can be added with the instal- Within their power range these
on request lation of a coupling/flange kit of pumps are suitable for all hydro-
the desired size up to the same size static drives in open circuit design.
• DIN and SAE splined shaft
as the front pump. Splitter gear Drives in offshore cranes and
• Direction of rotation clockwise
boxes can be eliminated. drilling equipment:
or counter clockwise
• Extensive range of control Double pump A20VO (A20VLO): – Lifting gear (winches)
• Optional optical or electrical Two rotary groups of the same – Telescope
swivel angle indicator nominal size are built together – Luffing gear
• Through drive back to back to form one compact
– Forward feed
unit. The common suction port
Functional operation – Clamping cylinder
and two separate service ports
• The flow is proportional to the – Drilling head
means easier piping. The through
drive speed and displacement,
drive offers provision for Presses:
and is continuously variable
mounting a pilot oil pump or – Balers (cotton, hay, scrap, trash)
• As the swashplate swivels out the
other gear or axial piston pumps. – Compactors
flow increases from zero to its
maximum value – Shears
• The power can be adjusted exter- Well servicing (on and offshore):
nally, even during operation – Workover rigs
– Coil tubing injectors
– Cementing
– Nitrogen fracturing
– Blenders, etc.

with 2-hole flange: Size 40 and 60 with 4-hole flange: Size 75…250
3 AA11VO

AA11VO Controls
Variation: pB max
• Pressure cut-off, integrated or
by remote control pB max
Setting
• Stroke limitation, hydraulic or range
electrical
• Load sensing control
0 Vg max
• Control of power setting
– high pressure related Variation
– pilot pressure related
• Pressure control by remote
(Load limiting control)
LR control
Power control • Pressure control for parallel
The power control ensures that the operation
displacement, dependent on the • Load sensing control
operating pressure, is controlled
so that with fixed drive speed the
pump will not exceed its pre-set
drive power.
After reaching the pre-set pressure
(start of control) the displacement
decreases, inversely proportional to
the pressure (operating pressure pB DR
• displacement Vg = constant). Pressure control

Optimum use of power can be With pressure control the


calculated and achieved by precise operating pressure in a hydraulic HD
control according to the hyperbola system is kept constant within the Hydraulic control,
characteristic. control range in spite of a variable
flow. pilot pressure related
pB The displacement of the pump is
If the operating pressure reaches or
exceeds the pre-set pressure steplessly adjusted in proportion to
Start of command value, the pump will the applied pilot pressure.
control
Setting range automatically swivel to a smaller Adjustment from Vg min to Vg max
displacement, the deviation is
The pilot pressure for the start of
reduced.
0 Vg max control may be set and the pilot
The pump only delivers as much pressure increase may be selected
fluid as is required by the (Vg min to Vg max).
consumer.
AA11VO 4

In the unpressurized condition the In the unpressurized condition the


pump remains set at its maximum pump remains set at its maximum
displacement volume. When the displacement volume. When the
operating pressure reaches ≥20 bar operating pressure reaches ≥ 20 bar
the pump swivels to Vg min (start the pump swivels to Vg min (start
of control). of control).
pSt I
Pilot pressure increase

Start of control
Setting range
EP
Electrical control with proportion-
al solenoid
0 Vg max 0 Vg max
The stepless and programmable
Variation setting of the displacement is Variation
• Pressure cut-off integrated or by effected by means of a propor- • Pressure cut-off integrated or by
remote control, fixed setting tional solenoid. remote control, fixed setting
• Pressure cut-off by remote Adjustment from Vg min to Vg max • Pressure cut-off by remote
control control
The adjustment is proportional to
the electric current (mA).

Combination pump A11VO130 + A11VO60 Variable displacement double pump A20VO


Back to back design
5 AA11VO

Technical Data
Type A11VO (without charge pump) A11VLO
Size 40 60 75 95 130* 190* 260 130 190 260
Displacement Vg max in3 2.56 3.56 4.52 5.72 7.93 11.76 15.86 7.93 11.76 15.86
(cm3) (42) (58.3) (74) (93.8) (130) (192.7) (260) (130) (192.7) (260)
Speed 1) at Vg max nmax rpm 3000 2700 2550 2350 2100 2100 1800 2500 2500 2300
Flow at nmax qV max GPM 33 41 50 58 72 107 124 86 127 158
(L/min) (126) (157) (188) (220) (273) (405) (468) (325) (482) (598)
Power Pmax HP 95 123 148 173 218 316 366 255 377 467
∆p = 5100 PSI (350 bar) (kW) (71) (92) (110) (129) (159) (236) (273) (190) (281) (348)
Torque Tmax lb-ft 173 239 304 385 533 791 1067 533 791 1067
∆p = 5100 PSI (350 bar) (Nm) (234) (324) (412) (522) (723) (1073) (1447) (723) (1073) (1447)
Weight (approx.) m lbs 60 79 99 117 145 278 152 287
(kg) (27) (36) (45) (53) (66) (126) (69) (130)
*Special sizes 145 and 210 available on request.

Type A20VO (without charge pump) A20VLO


Size 60 75 95 130 130 190 260
Displacement per Vg max in3 3.56 4.52 5.72 7.93 7.93 11.76 15.86
rotary group (cm3) (60) (74) (93.8) (130) (130) (192.7) (260)
Speed 1) at Vg max nmax rpm 2700 2550 2350 2100 2500 2500 2300
Flow at nmax qV max GPM 2x43 2x50 2x58 2x72 2x86 2x127 2x158
(L/min) (2x162)(2x188)(2x220)(2x273) (2x325)(2x482)
(2x598)
Power Pmax HP 1802) 295 346 426 510 751 933
∆p = 5100 PSI (350 bar) (kW) (134) (220) (258) (318) (380) (560) (696)
Torque Tmax kb-ft 3522) 608 770 1067 1067 1582 2135
∆p = 5100 PSI (350 bar) (Nm) (477) (824) (1044) (1446) (1446) (2145) (2894)
Weight (approx.) m lbs.
(kg )
AA11VO 6

Innovative Microcontroller Technology


The MC microcontroller is the basic component of an electronics
system for the programmable control of variable displacement pumps
and motors.

Rexroth has developed special The software is stored in the


user-specific software for program- EPROM and is supplied as an
ming this system. integral part of the micro-
controller.
For example the following software
Ask further for the software
GLB Electronic load limiting
specific to your application, either
control for excavators
readily available or to be custom
FZA Electronic drive control for produced, and also the most
tracked vehicles suitable microcontroller and other
FGR Electronic drive control electronics components.
for wheel loaders, fork-lift For more information see
trucks and community MC . . . . . . . . . . . . . . . . . RE 95050
vehicles
Bosch Rexroth Corporation
Industrial Hydraulics
2315 City Line Road
Bethlehem, PA 18017-2131
Telephone (610) 694-8300
Facsimile (610) 694-8467
www.boschrexroth-us.com

Bosch Rexroth Corporation


Corporate Headquarters
5150 Prairie Stone Parkway
Hoffman Estates, IL 60192-3707
Telephone (847) 645-3600
Facsimile (847) 645-6201

Bosch Rexroth Corporation


Electric Drives and Controls
5150 Prairie Stone Parkway
Hoffman Estates, IL 60192-3707
Telephone (847) 645-3600
Facsimile (847) 645-6201

Bosch Rexroth Corporation


Linear Motion and
Assembly Technologies
816 E. Third Street
Buchanan, MI 49107
Telephone (616) 695-0151
Facsimile (616) 695-5363

Bosch Rexroth Corporation


Pneumatics
1953 Mercer Road
Lexington, KY 40511-1021
Telephone (859) 254-8031
Facsimile (859) 281-3491

Bosch Rexroth Corporation


Mobile Hydraulics
1700 Old Mansfield Road
Wooster, OH 44691-0394
Telephone (330) 263-3300
Facsimile (330) 263-3333

RA 98 210/02.03
Printed in the United States

You might also like