Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 7 views

    Mro 154

    Uploaded by

    Hafiz Mazilan
    The document describes a bitumen emulsion protective coating called Nitoproof 10. It provides protection against damp and vapors for concrete and masonry. It can also be used as a protective coating below ground. The document outlines the product's uses, properties, instructions for use, and additional information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mro 154

    Uploaded by

    Hafiz Mazilan
    7 views3 pages
    The document describes a bitumen emulsion protective coating called Nitoproof 10. It provides protection against damp and vapors for concrete and masonry. It can also be used as a protective coating below ground. The document outlines the product's uses, properties, instructions for use, and additional information.

    Original Title

    MRO 154

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a bitumen emulsion protective coating called Nitoproof 10. It provides protection against damp and vapors for concrete and masonry. It can also be used as a protective coating below ground. The document outlines the product's uses, properties, instructions for use, and additional information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    7 views3 pages

    Mro 154

    Uploaded by

    Hafiz Mazilan
    The document describes a bitumen emulsion protective coating called Nitoproof 10. It provides protection against damp and vapors for concrete and masonry. It can also be used as a protective coating below ground. The document outlines the product's uses, properties, instructions for use, and additional information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Fosroc Nitoproof 10 constructive solutions

    Bitumen emulsion protective coating

    Uses Properties

    To act as a damp-proof membrane and vapourseal for The essential properties of Nitoproof 10 are:
    concrete and masonry. It can also be used as a protective
    Bitumen content : 60%
    coating for concrete below ground.
    Time between coats : Minimum 2 hours
    ! Foundation protective coating
    Chemical resistance :
    ! Curing membrane (Test results with some common chemicals)
    Potable water - Resistant
    Advantages Sea water - Resistant
    Ground water - Resistant
    Nitoproof 10 has a number of significant advantages as
    follows:
    Instructions for use
    ! Easy to apply
    Surface preparation
    ! Economical in use
    Surfaces to be coated must be sound, clean and free of oil or
    ! Multipurpose, serves both as a protective coating and grease. Any oil or grease contamination should be removed
    curing membrane with a proprietary chemical degreaser.

    ! Contains no solvent, no health hazard If the surface is dusty, it should be primed with a coat of
    Nitoproof 10, diluted with an equal quantity of cool, clean water
    ! Resists attack by chloride and sulphate ions present in
    and allowed to dry.
    the ground water
    Application
    ! Adhere to wide range of materials including concrete,
    steel, cork and wood Nitoproof 10 may be applied by brush, broom or squeegee.

    It is recommended that one or two coats should be applied


    Standards compliance
    depending on the degree of protection required. Allow a
    Nitoproof 10 complies with concrete curing requirements of minimum of 2 hours between coats.
    ASTM C309-93 when applied at a rate of 2m2 per litre and to
    Where the Nitoproof 10 is to take a screed, the second coat
    BS6949:1991 requirements for bituminous coating.
    should be blinded with clean, dry sharp sand as soon as
    applied. The excess sand should be brushed off when the
    Description
    coating has dried.
    Nitoproof 10 is a brown/black liquid blend of selected
    Cleaning
    bitumens emulsified with water to give an easily applied
    protective coating. Nitoproof 10 should be removed from tools and equipment
    with water when it is wet. On drying Nitoproof 10 may be
    Specification removed with Fosroc Solvent 102*.

    Concrete surfaces shall be waterproofed with Nitoproof 10, a


    Technical support
    bitumen emulsion protective coating. It shall be applied at a
    rate of 2 m2 per litre, and thus act as a combined waterproofing Fosroc offers a full technical support package to specifiers,
    and curing agent in accordance with ASTM C309. end users and contractors, as well as on-site assistance in
    locations all over the world.
    Nitoproof 10
    Fosroc Nitoproof 10

    Estimating Additional Information

    Supply Fosroc manufactures a wide range of complementary


    Nitoproof 10 : 20 & 200 litre drums products which include :
    Fosroc Solvent 102 : 5 litre containers
    ! waterproofing membranes & waterstops
    Coverage
    ! joint sealants & filler boards
    Nitoproof 10 : 2.0 to 5.0 m²/litre
    (depending on substrate) ! cementitious & epoxy grouts

    ! specialised flooring materials


    Storage
    Fosroc additionally offers a comprehensive package of
    Nitoproof 10 has a shelf life of 12 months when stored under
    products specifically designed for the repair and
    normal warehouse conditions between 15 and 40°C. Protect
    refurbishment of damaged concrete. Fosroc’s ‘Systematic
    from temperatures below 10°C.
    Approach’ to concrete repair features the following :

    Precautions ! hand-placed repair mortars

    Health and safety ! spray grade repair mortars

    Nitoproof 10 contains bituminous material. Possible risk of ! fluid micro-concretes


    irreversible effects in contact with skin. Wear suitable
    ! chemically resistant epoxy mortars
    protective clothing, gloves and eye/face protection. Barrier
    creams provide additional skin protection. Should accidental ! anti-carbonation/anti-chloride protective coatings
    skin contact occur, remove immediately with plenty of clean
    ! chemical and abrasion resistant coatings
    water and seek medical advice. If swallowed, seek medical
    attention immediately - do not induce vomiting. For further information on any of the above, please consult
    your local Fosroc office - as below.
    Fire

    Nitoproof 10 is not flammable. Fosroc Solvent 102 is


    flammable. Ensure adequate ventilation. Do not use near a
    naked flame and do not smoke during use.

    Flash point
    Fosroc Solvent 102 : 33°C

    For further information, please consult the Material Safety


    Data Sheet for the respective products.

    * Denotes the trademark of Fosroc International Limited


    †
    See separate data sheet

    Important note
    Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for
    the Supply of Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility to
    obtain the latest version.

    Head Office
    telephone: (+9714) 2039699 fax: (+9714) 2859649 email: agf@fosroc.com
    Al Gurg Fosroc LLC
    Regional offices
    Post Box 657, Dubai Abu Dhabi, Al Gurg Fosroc telephone: 673 1779 fax: 673 1449 email: abudhabi@fosroc.com
    United Arab Emirates Bahrain, YBA Kanoo telephone: 17738200 fax: 17732828 email: bahrain@fosroc.com
    Kuwait, Boodai telephone: 4817618 fax: 4832124 email: kuwait@fosroc.com

    www.fosroc.com
    Oman, Al Amana telephone: 24815080 fax: 24817554 email: oman@fosroc.com
    Qatar, Tadmur telephone: 4432365 fax: 4419517 email: qatar@fosroc.com

    UAE/0123/09/H

    You might also like