Bituproof 50R
Bituproof 50R
Bituproof 50R
Description
Technical Properties @ 250C:
Bituproof 50R is a black/brown emulsified bitumen
Form: Liquid
liquid reinforced with latex rubber, ac ng as damp-proof,
vapour barrier and protec ve coa ng for concrete and Density: 1.05 ± 0.02 g/cm³
masonry.
Over coa ng me: 10 hr
Applications Applica on tempera-
5 - 45⁰C
ture:
Bituproof 50R provides a vapour barrier, protec ve
coa ng, and curing compound for: Drying me: 3 - 5 hr
VOC: < 40 g/ltr
Under ground concrete founda ons.
Concrete and masonry block walls.
Primer Coat
Walls behind cladding systems.
Concrete slabs.
There is generally no need for primer coat. Dusty surfaces
Basement walls.
should be primed with a coat of Bituproof 50R, diluted
with an equal quan ty of cool, clean water and allowed
Advantages
to dry.
Resists a ack by chlorides and sulphate ions present
Application
in ground water.
Applied by brush which make it easy to use.
It is recommended that two coats of Bituproof 50R be
Economical.
applied. The second coat should be applied at right angle
Water based, has no solvents.
to the first coat. Allow a minimum of 2 hours between
Asbestos free.
coats. S r well before use. Bituproof 50R may be applied
Does not rot.
by brush, broom or squeegee.
Standards Cleaning
Bituproof 50R complies with ASTM D1227-95, Type II, Tools and equipment can be cleaned with water when
Class 2. s ll wet.
Bituproof 50R complies with ASTM C309-93 when Dried Bituproof 50R may be removed with DCP Solvent.
applied with two coats at a rate of 2 m²/litre.
Packaging
Method of Use
Bituproof 50R is available in 18 and 200 litre drums.
Surface Preparation
Coverage
Surface prepara on is very important to get the highest
performance of Bituproof 50R. Any surface to be coated 3 - 5 m²/litre, depending on surface roughness.
must be clean, sound and free of oil or grease. Any oil or
grease contamina on should be removed with a chemical Storage
degreaser.
Store away from direct sunlight, and protect from
All holes should be filled with a suitable cemen ous freezing.
mortar before applica on of Bituproof 50R.
Bituproof 50R
Shelf Life More from Don Construction Products
Bituproof 50R has a shelf life of 12 months from date of A wide range of construc on chemical products are
manufacture if stored in proper condi ons. manufactured by DCP which include:
Fire
Flash Point:
DCP Solvent: 37°C.
Note:
08-0004-A-2013
tĞĞŶĚĞĂǀŽƵƌƚŽĞŶƐƵƌĞƚŚĂƚĂŶLJŝŶĨŽƌŵĂƟŽŶ͕ĂĚǀŝĐĞŽƌƌĞĐŽŵŵĞŶĚĂƟŽŶǁĞŵĂLJŐŝǀĞŝŶ
ƉƌŽĚƵĐƚ ůŝƚĞƌĂƚƵƌĞ ŝƐ ĂĐĐƵƌĂƚĞ ĂŶĚ ĐŽƌƌĞĐƚ͘ ,ŽǁĞǀĞƌ͕ ďĞĐĂƵƐĞ ǁĞ ŚĂǀĞ ŶŽ ĐŽŶƚƌŽů ŽǀĞƌ
ǁŚĞƌĞĂŶĚŚŽǁƉƌŽĚƵĐƚƐĂƌĞĂƉƉůŝĞĚ͕ǁĞĐĂŶŶŽƚĂĐĐĞƉƚĂŶLJůŝĂďŝůŝƚLJĂƌŝƐŝŶŐĨƌŽŵƚŚĞƵƐĞŽĨ
ƚŚĞƉƌŽĚƵĐƚƐ͘