Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    Bituproof 11

    Uploaded by

    Yousef Halaseh
    Bituproof 11 is a dark brown, elastomeric, high build, water-based rubberized bitumen coating formulated to waterproof and protect concrete and masonry surfaces. It can bridge minor cracks, resist chloride and sulfate ions, and is applied in two coats using a brush. Bituproof 11 dries within 3-5 hours, has over 50% bitumen content, over 500% elongation, and provides waterproofing and protection for walls, roofs, foundations, and other concrete structures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bituproof 11

    Uploaded by

    Yousef Halaseh
    38 views2 pages
    Bituproof 11 is a dark brown, elastomeric, high build, water-based rubberized bitumen coating formulated to waterproof and protect concrete and masonry surfaces. It can bridge minor cracks, resist chloride and sulfate ions, and is applied in two coats using a brush. Bituproof 11 dries within 3-5 hours, has over 50% bitumen content, over 500% elongation, and provides waterproofing and protection for walls, roofs, foundations, and other concrete structures.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Bituproof 11 is a dark brown, elastomeric, high build, water-based rubberized bitumen coating formulated to waterproof and protect concrete and masonry surfaces. It can bridge minor cracks, resist chloride and sulfate ions, and is applied in two coats using a brush. Bituproof 11 dries within 3-5 hours, has over 50% bitumen content, over 500% elongation, and provides waterproofing and protection for walls, roofs, foundations, and other concrete structures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    38 views2 pages

    Bituproof 11

    Uploaded by

    Yousef Halaseh
    Bituproof 11 is a dark brown, elastomeric, high build, water-based rubberized bitumen coating formulated to waterproof and protect concrete and masonry surfaces. It can bridge minor cracks, resist chloride and sulfate ions, and is applied in two coats using a brush. Bituproof 11 dries within 3-5 hours, has over 50% bitumen content, over 500% elongation, and provides waterproofing and protection for walls, roofs, foundations, and other concrete structures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Bituproof 11

    Water based, elastomeric, high build rubberized bitumen coa ng (Formerly known as
    Setcrete 11)

    Description
    Technical Properties @ 25⁰C:
    Bituproof 11 is a dark brown emulsified bitumen liquid
    Form: Liquid
    reinforced with rubber, formulated from selected raw
    materials to form a high build elastomeric water proof Density: 1 ± 0.02 gm/ cm³
    and protec ve coa ng for concrete and masonry.
    Solid content: Minimum 50%
    Applications Over coa ng me: 10 hrs.

    Bituproof 11 provides a water proofing and protec ve Elonga on at break:


    > 500
    coa ng for: ASTM D412
    Applica on
     Retaining walls. 5 - 45°C
    temperature:
     Shaded or led roofs.
     Under ground concrete founda ons. Bitumen content: > 50%
     Wet floor areas such as bathrooms and kitchens. Dry me: 3 – 5 hrs.
     Where minor live crakes may occur in concrete
    substrates, Bituproof 11 will bridge such minor cracks. Tensile strength:
    > 0.2 MPa
     Basement walls. ASTM D412
     Concrete slabs.
    Tear strength:
    0.1 MPa
    BS 2782
    Advantages
    VOC: < 40 gr/ ltr.
     Elastomeric will bridge minor cracks which may occur
    in concrete substrates.
    Application
     Resists a ack by chloride and sulphate ions present in
    ground water.
    It is recommended that two coats of Bituproof 11 be
     Single component.
    applied. The second coat should be applied at a right
     Applied by brush which make it easy to use.
    angle to the first coat. Allow a minimum of 3 hours
     Economical.
    between coats. S r well before use. Bituproof 11 may be
     Solvent free, non flammable.
    applied by brush, broom or squeegee.
     Asbestos free.
     Do not rot.
    Cleaning
    Method of Use Tools and equipment can be cleaned with water when
    s ll wet. Dried Bituproof 11 may be removed with DCP
    Surface Preparation Solvent.
    Surface prepara on is very important to get the highest
    Packaging
    performance of Bituproof 11. Any surface to bpe coated
    must be clean, sound and free of oil or grease. Any oil or
    Bituproof 11 is available in 18 and 200 litres drums.
    grease contamina on should be removed with a chemical
    degreaser. All holes should be filled with a suitable
    Coverage
    cemen ous mortar before applica on of Bituproof 11.
    1.15 litres/ m²/ coat to achieve 750 microns dry film
    Primer Coat
    thickness.
    There is generally no need for primer coat. Dusty surfaces
    should be primed with a coat of Bituproof 11, diluted with
    an equal quan ty of cool, clean water and allowed to dry.
    Bituproof 11
    Storage More from Don Construction Products

    Store away from direct sunlight, and protect from A wide range of construc on chemical products are
    freezing. manufactured by DCP which include:

    Shelf Life  Concrete admixtures.


     Surface treatments
    Bituproof 11 has a shelf life of 12 months if stored in  Grouts and anchors.
    proper condi ons.  Concrete repair.
     Flooring systems.
    If these condi ons are exceeded, DCP Technical  Protec ve coa ngs.
    Department should be contacted for advice.  Sealants.
     Waterproofing.
    Cautions  Adhesives.
     Tile adhesives and grouts.
    Health and Safety  Building products.
     Structural strengthening.
    As with all bituminous products, care should be taken
    during use and storage to avoid contact with skin, eyes
    and mouth. Wear suitable protec ve clothing, gloves
    and eye/face protec on. Should accidental skin contact
    occur, remove immediately with plenty of clean water. If
    swallowed, seek medical a en on immediately - do not
    induce vomi ng.

    For further informa on refer to the Material Safety Data


    sheet.

    Fire

    Bituproof 11 is non-flammable.

    DCP Solvent is flammable. Ensure adequate ven la on.


    Do not use near a naked flame and do not smoke during
    use.

    Flash Point:
    DCP Solvent: 37°C.
    08-0001-A-2015

    You might also like