DuraCirc 53 Hi-Flow Horizontal Bottom Tech Spec
DuraCirc 53 Hi-Flow Horizontal Bottom Tech Spec
DuraCirc 53 Hi-Flow Horizontal Bottom Tech Spec
Pump construction
Internal finish: Ra <0.8/32 Rotor casing: 1.4404/316L
Front cover: 1.4404/316L Piston rotors: ASTM A-494/Non-Galling Alloy
Shafts: Duplex 1.4460/329 Port orientation: Horizontal
Shaft position: Bottom Gear casing: 1.4301/304
Max process pressure: 25 bar Max temp: 150 °C
Connection type: TriClamp for ASME Port size: 63,5mm / 2½"
Elastomer: FPM Seal type: Single mechanical/flushed
Seal material rotary: Silicon Carbide Seal material stationary: Silicon Carbide
Seal flush connection: BSP/G 1/4" Connection, sterile flushing: None
FDA oil fill: Yes Heating jacket: No
Traceability EN10204 3.1: No Surface finish cert: No
Hydrostatic test: No
With carbon stationary seal faces, max process pressure is limited to 15 bar / 218 PSI.
Drive specification
Drive type: Geared IEC motor Motor brand: Nord
Thermistors: Yes For frequency inverter: Yes
Enclosure: TEFC/IP55 Mounting: SS folded base plate
Flexible coupling Cover: SS Coupling guard
Power: 1.50 kW Drive speed: 298 rpm
Poles: 4 Poles Frequency 60 Hz
Voltage: 220D/380Y Special Compliance: Brazil
Efficiency Level: IR3 Forced fan ventialtion: No
This document and its content is owned by Alfa Laval Corporate AB and protected by laws governing intellectual property and thereto
related rights. It is the responsibility of the user of this document to comply with all applicable intellectual property laws. Without limiting
any rights related to this document, no parts of this document may be copied, reproduced or transmitted in any form or by any means
(electronic, mechanical, photocopying, recording or otherwise), or for any purpose, without the expressed permission or authorized by
Alfa Laval Corporate AB. Alfa Laval Corporate AB will enforce its rights related to this document to the fullest extent of the law, including
seeking of criminal prosecution.
Technical specification
Alfa Laval DuraCirc Pump
Operational conditions
Duty 1
Flow: (m³/h): 10.0
Speed: (rpm): 290
Absorbed power: (kW): 1.2
Frequency (Hz): 58
Operating torque: (Nm): 40.3
Rated torque, motor: (Nm): 46.1
NPSHr: (m lc): 0.6
This document and its content is owned by Alfa Laval Corporate AB and protected by laws governing intellectual property and thereto
related rights. It is the responsibility of the user of this document to comply with all applicable intellectual property laws. Without limiting
any rights related to this document, no parts of this document may be copied, reproduced or transmitted in any form or by any means
(electronic, mechanical, photocopying, recording or otherwise), or for any purpose, without the expressed permission or authorized by
Alfa Laval Corporate AB. Alfa Laval Corporate AB will enforce its rights related to this document to the fullest extent of the law, including
seeking of criminal prosecution.
Technical specification
Alfa Laval DuraCirc Pump
This document and its content is owned by Alfa Laval Corporate AB and protected by laws governing intellectual property and thereto
related rights. It is the responsibility of the user of this document to comply with all applicable intellectual property laws. Without limiting
any rights related to this document, no parts of this document may be copied, reproduced or transmitted in any form or by any means
(electronic, mechanical, photocopying, recording or otherwise), or for any purpose, without the expressed permission or authorized by
Alfa Laval Corporate AB. Alfa Laval Corporate AB will enforce its rights related to this document to the fullest extent of the law, including
seeking of criminal prosecution.