Eee - gn12 B Tech

ACADEMIC REGULATIONS
COURSE STRUCTURE
AND
DETAILED SYLLABUS
ELECTRICAL AND
ELECTRONICS ENGINEERING
FOR
B.TECH FOUR YEAR DEGREE COURSE
(Applicable for the batch admitted during 2012-2013)
G.NARAYANAMMA INSTITUTE OF TECHNOLOGY & SCIENCE

AUTONOMOUS (FOR WOMEN)
SHAIKPET, HYDERABAD – 500 008. A.P.
ELECTRICAL AND ELECTRONICS ENGINEERING 2012-2013
ACADEMIC REGULATIONS GN-R-12 FOR B.TECH. REGULAR COURSE
(Effective for the students admitted into I year from the
Academic Year 2012-2013 and onwards)
1. Award of B.Tech. Degree
A student will be declared eligible for the award of the B. Tech. Degree
if he fulfils the following academic regulations:
i. Pursued a course of study for not less than four academic years
and not more than eight academic years.
ii. Registered for 200 credits and secured 200 credits
2. Students, who fail to fulfill all the academic requirements for the award
of the degree within eight academic years from the year of their
admission, shall forfeit their seat in B.Tech course.
3. Courses of study
The following courses of study are offered at present for specialization
for the
Branch Code Branch
02 Electrical and Electronics Engineering
04 Electronics and Communication Engineering
05 Computer Science and Engineering.
12 Information Technology
17 Electronics and Telematics Engineering.
22 Instrumentation and Control Engineering
4. Distribution and Weightage of Marks
i. The performance of a student in each semester shall be evaluated
subject –wise with a maximum of 100 marks for theory and 75
marks for practical subject. In addition, Industry oriented mini-
project, seminar, comprehensive viva and project work shall be
evaluated for 50, 50 , 100 and 200 marks respectively.
ii. For theory subjects the distribution shall be 25 marks for Internal
Evaluation and 75 marks for the End-Examination.
iii. For theory subjects, during the semester there shall be 2 midterm
examinations. Each mid term examination consists of Part-
A(Objective Type) for 5 marks and Part-B(subjective paper) for 15
marks with a duration of 2 Hrs. Assignment carries 5 marks.
Subjective paper shall contain 5 questions(Covering all the units) of which
student has to answer 3 questions each 5 marks
1
FOR THE 2012 ADMITTED BATCH ONLY Students performance in both

the mid exams will be considered for evaluating the internal marks.
For the best scored mid weightage of 75 % , and for the other 25 %
weightage will be given.
FOR THE 2013 ADMITTED BATCH Students performance in both the mid
exams will be considered for evaluating the internal marks. Average
performance of the two mids will be considered for evaluating internal
marks.
(X1 + X2)
Average Performance = —————-
2
X1= First Mid Marks, X2 = Second Mid Marks
The first mid term examination shall be conducted for 50 % of the syllabus
and the second mid term examination shall be conducted for the remaining
50 % of the syllabus.
iv. For practical subjects there shall be a continuous evaluation during
the semester for 25 sessional marks and 50 end examination marks.
Out of the 25 marks for internal, day-to-day work in the laboratory
shall be evaluated for 15 marks and internal examination for
practical shall be evaluated for 10 marks conducted by the
concerned laboratory teacher. The end examination shall be
conducted with external examiner and laboratory teacher. The
external examiner shall be appointed from the panel of examiners
as decided by BOS.
v. For the Engineering Drawing subject the distribution shall be 25
marks for internal evaluation (15 marks for day-to-day work and
10 marks for internal tests) and 75 marks for end examination.
Two internal tests will be conducted and Students performance in
both the mid exams will be considered for evaluating the internal
marks. For the best scored mid weightage of 75 % , and for the
other 25 % weightage will be given
vi. There shall be an industry-oriented mini-Project, in collaboration
with an industry of their specialization, to be taken up during the
vacation after III year II Semester examination. However, the mini
project and its report shall be evaluated in IV year I Semester. The
industry oriented mini project shall be submitted in report form
and should be presented before the committee, which shall be
evaluated for 50 marks. The committee consists of head of the
department, the supervisor of mini project and a senior faculty
member of the department. There shall be no internal marks for
industry oriented mini project.
2
vii. There shall be a seminar presentation in IV year II Semester. For
the seminar, the student shall collect the information on a
specialized topic and prepare a technical report, showing his
understanding over the topic, and submit to the department, which
shall be evaluated by the Departmental committee consisting of
Head of the department, seminar supervisor and a senior faculty
member. The seminar report shall be evaluated for 50 marks. There
shall be no external examination for seminar.
viii. There shall be a Comprehensive Viva-Voce in IV year II semester.
The Comprehensive Viva-Voce will be conducted by a Committee
consisting of (i) Head of the Department (ii) two Senior Faculty
members of the Department. The Comprehensive Viva-Voce is
aimed to assess the students’ understanding in various subjects
he / she studied during the B.Tech course of study. The
Comprehensive Viva-Voce is evaluated for 100 marks by the
Committee. There are no internal marks for the Comprehensive
viva-voce.
ix. Out of a total of 200 marks for the project work, 100 marks shall
be for Internal Evaluation and 100 marks for the End Semester
Examination. The End Semester Examination (viva-voce) shall be
conducted by the committee consists of External examiner, HOD,
the supervisor of the major project and a senior faculty of the dept.
The topics for industry oriented mini project, seminar and project
work shall be different from each other. The evaluation of project
work shall be conducted at the end of the IV year II Semester. Out
of the 100 marks for Internal evaluation 50 marks will be awarded
by the supervisor, 50 marks will be awarded by the committee
constituted by HOD shall be on the basis of two seminars given by
each student on the topic of her project.
5. Attendance Requirements:
i. A student shall be eligible to appear for University examinations if
he acquires a minimum of 75% of attendance in aggregate of all
the subjects.
ii. Shortage of Attendance below 65% in aggregate shall in NO
case be condoned .
iii. Condonation of shortage of attendance in aggregate up to 10%
(65% and above and below 75%) in each semester or I year may
be granted by the College Academic Committee.
iv. A student will not be promoted to the next semester unless he
satisfies the attendance requirement of the present semester / I
year, as applicable. They may seek re-admission for that
3
semester / I year when offered next.
v. Students whose shortage of attendance is not condoned in any
semester / I year are not eligible to take their end examination
of that class and their registration shall stand cancelled.
vi. A stipulated fee shall be payable towards condonation of
shortage of attendance.
6. Minimum Academic Requirements:
The following academic requirements have to be satisfied in addition
to the attendance requirements mentioned in item no.5
i. A student shall be deemed to have satisfied the minimum academic
requirements and earned the credits allotted to each theory or
practical design or drawing subject or project if he secures not less
than 35% of marks in the end examination and a minimum of 40%
of marks in the sum total of the internal evaluation and end
examination taken together.
ii. A student shall be promoted from II to III year only if he fulfils the
academic requirement of 36 credits from TWO regular and ONE
supplementary examinations of I year I Semester, and ONE regular
and ONE supplementary examination of I Year II Semester, and
ONE regular examination of II year I semester irrespective of
whether the candidate takes the examination or not.
iii. A student shall be promoted from third year to fourth year only if
he fulfils the academic requirements of total 60 credits from the
following examinations, whether the candidate takes the
examinations or not.
a. Three regular and two supplementary examinations of I year I
Semester.
b. Two regular and two supplementary examinations of I year II
Semester
c. Two regular and one supplementary examinations of II year I
semester.
d. One regular and one supplementary examinations of II year II
semester.
e. One regular examination of III year I semester.
iv. A student shall register and put up minimum attendance in all 200
credits and earn the 200 credits. Marks obtained in all 200 credits
shall be considered for the calculation of percentage of marks.
v. Students who fail to earn 200 credits as indicated in the course
structure within eight academic years from the year of their
4
admission shall forfeit their seat in B.Tech course and their
admission shall stand cancelled.
7. Course pattern:
i. The entire course of study is of four academic years. All the I,II,III
and IV years are on semester pattern.
ii. A student eligible to appear for the end examination in a subject,
but absent at it or has failed in the end examination may appear
for that subject at the supplementary examination.
8. Award of Class:
After a student has satisfied the requirements prescribed for the
completion of the program and is eligible for the award of B. Tech.
Degree he shall be placed in one of the following four classes
Class Awarded % of marks to be secured
From the
First Class with aggregate
Distinction 70% and above marks
First Class Below 70% but not less than 60% secured for
the best
Second Class Below 60% but not less than 50%
200 Credits.
Pass Class Below 50% but not less than 40%
(The marks in internal evaluation and end examination shall be shown
separately in the marks memorandum)
9. Minimum Instruction Days:
The minimum instruction days for each semester shall be 90 clear
instruction days.
10. There shall be no branch transfers after the completion of admission
process.
11. General:
i. Where the words “he”, “him”, “his”, occur in the regulations, they
include “she”, “her”, “hers”.
ii. The academic regulation should be read as a whole for the purpose
of any interpretation.
iii. In the case of any doubt or ambiguity in the interpretation of the
above rules, the decision of the PRINCIPAL/DIRECTOR is final.
iv. The COLLEGE may change or amend the academic regulations or
syllabi at any time and the changes or amendments made shall be
applicable to all the students with effect from the dates notified
by the COLLEGE.
5
Academic Regulations for B. Tech. (Lateral Entry Scheme)
(Effective for the students getting admitted into II year from the
Academic Year 2013-2014 and onwards)
Register for 150 credits and secure 150 credits.
1. The Students have to acquire 150 credits from II to IV year of B.Tech.
Program (Regular) for the award of the degree.
Register for 150 credits and secure 150 credits.
2. Students, who fail to fulfil the requirement for the award of the degree
in 6 consecutive academic years from the year of admission, shall forfeit
their seat.
3. The same attendance regulations are to be adopted as that of B. Tech.
(Regular).
4. Promotion Rule:
A student shall be promoted from third year to fourth year only if he
fulfils the academic requirements of 36 credits from the examinations.
a. Two regular and one supplementary examinations of II year I
semester.
b. One regular and one supplementary examinations of II year II
semester.
c. One regular examination of III year I semester.
5. Award of Class:
After a student has satisfied the requirements prescribed for the
completion of the program and is eligible for the award of B. Tech.
Degree he shall be placed in one of the following four classes:
Class Awarded % of marks to be secured From the

First Class with aggregate
Distinction 70% and above marks secured
First Class Below 70% but not less than 60% for 150
Second Class Below 60% but not less than 50% Credits.(i.e. II
year to IV year)
Pass Class Below 50% but not less than 40%
6
MALPRACTICES RULES
DISCIPLINARY ACTION FOR / IMPROPER CONDUCT IN EXAMINATIONS
Nature of Malpractices/
Punishment
Improper conduct
If the candidate:
1. (a) Possesses or keeps accessible in Expulsion from the examination
examination hall, any paper, hall and cancellation of the
note book, programmable performance in that subject only.
calculators, Cell phones, pager,
palm computers or any other
form of material concerned with
or related to the subject of the
examination (theory or
practical) in which he is
appearing but has not made use
of (material shall include any
marks on the body of the
candidate which can be used as
an aid in the subject of the
examination)
(b) Gives assistance or guidance or Expulsion from the examination
receives it from any other hall and cancellation of the
candidate orally or by any other performance in that subject only
body language methods or of all the candidates involved. In
communicates through cell case of an outsider, he will be
phones with any candidate or handed over to the police and a
persons in or outside the exam case is registered against him.
hall in respect of any matter.
2. Has copied in the examination Expulsion from the examination
hall from any paper, book, hall and cancellation of the
programmable calculators, performance in that subject and
palm computers or any other all other subjects the candidate
form of material relevant to the has already appeared including
subject of the examination practical examinations and
(theory or practical) in which project work and shall not be
the candidate is appearing. permitted to appear for the
remaining examinations of the
subjects of that Semester/year.
The Hall Ticket of the candidate
is to be cancelled.
7
3. Impersonates any other The candidate who has

candidate in connection with impersonated shall be expelled
the examination. from examination hall. The
candidate is also debarred and
forfeits the seat. The
performance of the original
candidate who has been
impersonated, shall be cancelled
in all the subjects of the
examination (including practicals
and project work) already
appeared and shall not be
allowed to appear for
examinations of the remaining
subjects of that semester/year.
The candidate is also debarred
for two consecutive semesters
from class work and all END
examinations. The continuation
of the course by the candidate is
subject to the academic
regulations in connection with
forfeiture of seat. If the imposter
is an outsider, he will be handed
over to the police and a case is
registered against him.
4. Smuggles in the Answer book Expulsion from the examination

or additional sheet or takes out hall and cancellation of
or arranges to send out the performance in that subject and
question paper during the all the other subjects the
examination or answer book or candidate has already appeared
additional sheet, during or including practical examinations
after the examination. and project work and shall not
be permitted for the remaining
examinations of the subjects of
that semester/year. The
candidate is also debarred for
two consecutive semesters from
class work and all END
8

forfeiture of seat.
5. Uses objectionable, abusive or Cancellation of the performance
offensive language in the in that subject.
answer paper or in letters to
the examiners or writes to the
examiner requesting him to
award pass marks.
6. Refuses to obey the orders of In case of students of the college,
the Chief Superintendent/ they shall be expelled from
Assistant – Superintendent / examination halls and
any officer on duty or cancellation of their
misbehaves or creates performance in that subject and
disturbance of any kind in and all other subjects the
around the examination hall or candidate(s) has (have) already
organizes a walk out or appeared and shall not be
instigates others to walk out, permitted to appear for the
or threatens the officer-in remaining examinations of the
charge or any person on duty subjects of that semester/year.
in or outside the examination The candidates also are debarred
hall of any injury to his person and forfeit their seats. In case of
or to any of his relations outsiders, they will be handed
whether by words, either over to the police and a police
spoken or written or by signs case is registered against them.
or by visible representation,
assaults the officer-in-charge,
or any person on duty in or
outside the examination hall
or any of his relations, or
indulges in any other act of
misconduct or mischief which
result in damage to or
destruction of property in the
examination hall or any part of
the College campus or engages
in any other act which in the
opinion of the officer on duty
amounts to use of unfair
means or misconduct or has
the tendency to disrupt the
9
orderly conduct of the

examination.
7. Leaves the exam hall taking Expulsion from the examination
away answer script or hall and cancellation of
intentionally tears of the script performance in that subject and
or any part thereof inside or all the other subjects the
outside the examination hall. candidate has already appeared
including practical examinations
and project work and shall not
be permitted for the remaining
candidate is also debarred for
two consecutive semesters from
class work and all END
forfeiture of seat.
8. Possess any lethal weapon or Expulsion from the examination
firearm in the examination hall and cancellation of the
hall. performance in that subject and
all other subjects the candidate
has already appeared including
practical examinations and
project work and shall not be
permitted for the remaining
forfeits the seat.
9. If student of the college, who Student of the colleges expulsion
is not a candidate for the from the examination hall and
particular examination or any cancellation of the performance
person not connected with the in that subject and all other
college indulges in any subjects the candidate has
malpractice or improper already appeared including
conduct mentioned in clause 6 practical examinations and
to 8. project work and shall not be
10

forfeits the seat. Person(s)
who do not belong to the College
will be handed over to police
and, a police case will be
registered against them.
10. Comes in a drunken condition Expulsion from the examination
to the examination hall. hall and cancellation of the
performance in that subject and
all other subjects the candidate
has already appeared including
practical examinations and
project work and shall not be
that semester/year.
11. Copying detected on the basis Cancellation of the performance
of internal evidence, such as, in that subject and all other
during valuation or during subjects the candidate has
special scrutiny. appeared including practical
examinations and project work
of that semester/year
examinations.
12. If any malpractice is detected
which is not covered in the
above clauses 1 to 11 shall be
reported to the PRINCIPAL/
DIRECTOR for further action to
award suitable punishment.
11
I YEAR I SEMESTER - COURSE STRUCTURE

Code Subject L T/P/D C
120004 English 4 - 3
120007 Mathematics-I 4 1 4
120501 Computer Programming 4 1 4
120008 Engineering Physics 4 1 4
120003 Engineering Drawing 2 4 3
120502 Computer Programming Lab - 3 2
120005 English Lab - 3 2
120009 Engineering Physics Lab - 3 2
Total 18 16 24
I YEAR II SEMESTER - COURSE STRUCTURE

120015 Mathematics –II 4 1 4
120016 Mathematics –III 4 1 4
120206 Electrical Circuits 4 1 4
120010 Engineering Chemistry 4 - 4
120503 Data Structures 4 1 4
120011 Engineering Chemistry lab - 3 2
120205 Electrical Circuits Lab - 3 2
120504 Data Structures Lab - 3 2
Total 20 13 26
12
II YEAR I SEMESTER - COURSE STRUCTURE

120020 Mathematics –IV 4 1 4
120210 Fluid Mechanics &
Hydraulic Machinery 3 1 3
120403 Electronic Devices & Circuits 4 1 4
120212 Network Theory 3 1 3
120208 Electrical Measurements 3 1 3
120207 Electrical Machines –I 4 1 4
120211 Fluid Mechanics &
Hydraulic Machinery Lab - 3 2
120209 Electronic Devices & Circuits Lab - 3 2
Total 21 12 25
II YEAR I SEMESTER - COURSE STRUCTURE

120021 Environmental Science 3 - 3
120219 Power Systems –I 4 1 4
120218 Electronic Circuits 3 1 3
121709 Switching Theory & Logic Design 4 1 4
120214 Electrical Machines –II 4 1 4
120217 Electro Magnetic Fields 3 1 3
120215 Electrical Machines Lab-I 0 3 2
120216 Electrical Measurements Lab 0 3 2
Total 21 11 25
13
III YEAR I SEMESTER - COURSE STRUCTURE

120022 Managerial Economics &
Financial Analysis 3 - 3
120225 Power Systems –II 3 1 3
120416 IC Applications 3 1 3
120224 Power Electronics 4 1 4
120221 Computer Methods in
Power Systems 4 1 4
120222 Electrical Machines –III 4 1 4
120220 Advanced English
Communications Lab 0 3 2
120223 Electrical Machines Lab-II 0 3 2
Total 21 11 25
III YEAR I SEMESTER - COURSE STRUCTURE

120023 Management Science 3 - 3
120231 Power Semiconductor Drives 4 1 4
120226 Control Systems 4 1 4
121718 Micro Processors & Micro Controllers 4 1 4
Open Elective
120232 Renewable Energy Sources
120227 Intellectual Property Rights
120025 Nano Technology 3 1 3
120229 OOPS through JAVA 3 1 3
120230 Power Electronics Lab 0 3 2
120228 Micro Processors & Microcontrollers lab 0 3 2
Total 21 11 25
14
IV YEAR I SEMESTER - COURSE STRUCTURE

120243 Switch Gear & Protection 4 1 4
120244 Utilization Of Electrical Energy 4 1 4
120242 Power System Operation & Control 4 1 4
Elective –I
120238 High Voltage Engineering
120235 Digital Signal Processing
120234 Digital Control Systems 3 1 3
Elective –II
120241 Optimization Techniques
120236 Electrical Distribution Systems
121729 VLSI 3 1 3
120240 Instrumentation 3 - 3
120237 Electrical Simulation Lab 0 3 2
120233 Control Systems Lab 0 3 2
120239 Industry oriented Mini Project - - 2
Total 21 11 27
IV YEAR II SEMESTER - COURSE STRUCTURE
120249 HVDC Transmission 3 1 3
Elective –III
122235 Neural Networks & Fuzzy Logic
120250 Linear Systems Analysis
120252 Reliability Engineering and Application to
Power Systems 3 1 3
Elective –IV
120245 Advanced Control Systems
120248 EHV AC Transmission
120247 Computer Organization 3 1 3
120253 Seminar - 2 2
120251 Major Project - 15 10
120246 Comprehensive Viva - - 2
Total 9 20 23
Note: All End Examinations (Theory and Practical are of Three hours duration)
T – Tutorial L- Theory P- Practical D –Drawing C -Credits
15
ENGLISH
I Year - I Sem. L T/P/D C
4 /-/- 4
OBJECTIVES
a. To improve the language proficiency of the students in English with
emphasis on LSRW skills.
b. To equip the students to cope the academic subjects with greater
facility through the theoretical and practical components of the
English syllabi.
c. To develop the study skills and communication skills in formal and
informal situations.
SYLLABUS
UNIT – I
1. Chapter entitled Heaven’s Gate from “Enjoying Everyday English”,
Published by Sangam Books, Hyderabad.
1. Chapter entitled Heaven’s Gate from “Enjoying Everyday English”,
2. Chapters 1-6 from Wings of Fire: An Autobiography, APJ. Abdul Kalam
with Arun Tiwari, University Press.
3. Grammar : Nouns, Pronouns, Articles, Prepositions and Conjunctions
4. Vocabulary : Usage of Dictionary – to identify meaning, pronunciation
and usage of a word.
5. Writing : Paragraphs and Descriptions
UNIT – II
1. Chapter entitled The Connoisseur from “Enjoying Everyday English”,
2. Chapters 7-12 from Wings of Fire: An Autobiography, APJ. Abdul Kalam
with Arun Tiwari, University Press.
3. Grammar : Adjectives and Adverbials
4. Vocabulary : Words often confused – Homophones, Homonyms and
Homographs
5. Writing : Summarising and Note-making
UNIT – III
1. Chapter entitled The Cuddalore Experience from “Enjoying Everyday
English”, Published by Sangam Books, Hyderabad.
2. Chapters 13 - 18 from Wings of Fire: An Autobiography, APJ. Abdul
Kalam with Arun Tiwari, University Press.
3. Grammar : Tenses and Concord
16
4. Vocabulary: Word Formation and Word Origins - Prefixes and Suffixes.
5. Writing : Official correspondence – Memorandums, reports, letters
and e-mails
UNIT – IV
1. Chapter entitled Odds Against Us from “Enjoying Everyday English”,
2. Chapters 19 - 24 from Wings of Fire: An Autobiography, APJ. Abdul
Kalam with Arun Tiwari, University Press.
3. Grammar : Interrogative Sentences and Question Tags
4. Vocabulary : One word substitutes and analogies
5. Writing : Covering letter and Resume writing
UNIT – V
Engineering Ethics, Values and Professionalism – Senses of Engineering
Ethics, Variety of Moral issues, Professions and Professionalism, Assessment
of Safety and Risk, Collegiality and Loyalty, Respect for Authority,
Professional Rights, Computer ethics, Moral leadership, Corporate Code of
Conduct.
TEXT BOOKS/BOOKS PRESCRIBED
1. “Enjoying Everyday English”, Published by Sangam Books, Hyderabad.
2. “Wings of Fire : An Autobiography” APJ. Abdul Kalam with Arun Tiwari,
University Press.
3. “Learn Correct English: A Book of Grammar, Usage and Composition”
by Shiv K.Kumar and Hemalatha Nagarajan, Published by Pearson.
FOR GENERAL READING
The Diary of a Young Girl by Anne Frank
Short stories by O’Henry
Swami and his Friends by R.K.Narayan
How I taught my grand mother to read by Sudha Murthy
Brave New World by H.G.Wells
REFERENCES :
1. Objective English, Edgar Thorpe & Showick Thorpe, Pearson Education.
2. Murphy’s English Grammar with CD, Murphy, Cambridge University
Press.
3. ABC of Common Errors, Nigel D Turton, Mac Millan Publishers.
4. Engineering Ethics (Second Edition) Charles B.Fleddermann, Pearson
Education.
5. Professional Ethics, Jayshree Suresh & B.S.Raghavan, S.Chand &
Company Ltd.
17
MATHEMATICS-I
4 1/-/- 4
OBJECTIVE : The objective of this course is to understand the concepts of
calculus of single and several variables.
UNIT – I
SEQUENCES AND SERIES : Basic definitions of Sequences and Series –
Convergences and Divergence – Ratio test – Comparison test – Integral test
– Cauchy’s Root test – Raabe’s test – Absolute and Conditional Convergence.
Mean Value Theorems: Rolle’s Theorem – Lagrange’s Mean Value Theorem
– Cauchy’s Mean Value Theorem – Generalized Mean Value theorem. (All
theorems without proof)
UNIT – II
FUNCTIONS OF SEVERAL VARIABLES : Functions of Several Variables:
Functional Dependence - Jacobian- Maxima and Minima of functions of
two variables with constraints and without constraints.
Radius of Curvature - Centre and Circle of Curvature – Evolutes and Involutes-
Envelopes. (All concepts in Cartesian Coordinates)
UNIT – III
DIFFERENTIAL EQUATIONS OF FIRST ORDER AND FIRST DEGREE &
APPLICATIONS : Overview of Differential Equations - Exact, Linear and
Bernoulli - Applications to Newton’s Law of cooling, Law of Natural Growth
and Decay - Orthogonal Trajectories.
UNIT – IV
VECTOR CALCULUS : Vector Calculus: Gradient-Divergence -Curl and Related
Properties – Directional Derivatives & Angle between the Surfaces -
Gradient, Divergence, and Curl in Cylindrical and Spherical Coordinate
systems.
UNIT – V
MULTIPLE INTEGRALS AND VECTOR INTEGRAL THEOREMS : Multiple
integrals: Double and Triple Integrals – Change of Order of Integration-
change of variables.
Line integral – Work done – Surface Integral - Flux of a Vector Valued
Function.
Vector Integral Theorems: Green’s, Stoke’s and Gauss’s Divergence Theorems
(Statement & their Verification).
18
TEXT BOOKS:
1. Advanced Engineering Mathematics by Dr. S.R.K. Iyengar & Others,
Narosa, Publications.
2. Advanced Engineering Mathematics by E.Kreyszig, Wiley Publications.
3. Higher Engineering Mathematics by B.S.Grewal, Khanna Publications.
REFERENCES:
1. Engineering Mathematics – I by T.K. V. Iyengar, B. Krishna Gandhi &
Others, S. Chand Publications.
2. A Text Book of Engineering Mathematics – 1 by B.V. Ramana, Tata
MCGraw Hill Publications.
3. Engineering Mathematics- I by Dr. Shahnaz Bathul, PHI learning Pvt.
Ltd. (In Press)
19
COMPUTER PROGRAMMING
4 1/-/- 4
UNIT - I
INTRODUCTION TO COMPUTERS: Introduction to computers, computer
systems, computing environments, computer languages, creating and
running programs, software development method, algorithms, pseudo
code, flow charts, applying the software development method.
INTRODUCTION TO C LANGUAGE: Basic structures of C language, C tokens,
data types and sizes, declaration of variables, assigning values.
OPERATORS AND EXPRESSIONS: Statements, arithmetic, relational and
logical operators, increment and decrement operators, conditional
operator, bitwise operators, type conversions, expressions and evaluation,
input and output statements, Header files, C preprocessor, Programming
examples.
UNIT - II
CONTROL STATEMENTS: Conditional and control statements, programming
examples.
FUNCTIONS: Defining and accessing, parameter passing, function
prototypes, user defined functions, recursive functions , programming
examples.
Storage Classes, Scope rules, programming example.
ARRAYS: Defining and processing, one dimensional and two dimensional
arrays, initialization, passing arrays to a function, multi dimensional arrays,
command line arguments.
UNIT - III
STRINGS: Defining and operations on strings, string variables declaration,
reading, writing.
Passing strings as parameters , string handling functions.
POINTERS: Basic Concepts, pointer to pointer, passing pointers to a
function, operations on pointers, pointer
arithmetic, pointers and arrays, arrays of pointers, function pointers,
dynamic memory allocation.
UNIT - IV
STRUCTURES AND UNIONS: Structure definition, initializing, assigning
values, passing of structures as arguments, arrays of structures, pointers to
structures, self reference to structures, unions, typedef , enumerated, bit
fields, programming examples.
20
UNIT - V :
CONSOLE AND FILE I/O: File, types of files, file vs. console, file structure,
file attributes, file operations, standard I/O, formatted I/O, programming
examples.
TEXT BOOKS:
1. B. A. Fouruzan and R. F. Gilberg (2006), Computer Science: A structured
programming approach using C, 3rd Edition, Thomson Publications, New
Delhi.
2. Yashawanth Kanethkar (2008), Let us C, 8th Edition, Jones & Bartlett
Publishers, India.
REFERENCE BOOKS:
1. Herbert Schildt (2000), C: The Complete Reference, 4th Edition, New
Delhi, Osborne Mc Graw Hill.
2. B. W. Kerninghan and Dennis M. Ritche (1988), The C Programming
Language, 2nd Edition, Prentice Hall
3. Software Series, India.
4. Stephen G.Kochan (2004), Programming in C, 3rd Edition, Pearson
Education Private Limited
21
ENGINEERING PHYSICS
4 1/-/- 4
OBJECTIVES: This course imparts students, the basic knowledge of the
electromagnetic properties, and optical properties which form the requirement
for understanding and applying principles of physics for electronic, electrical
and communicational engineering. This also enhances the classical to Quantum
mechanical
UNIT- I
1. SOLIDS AND CRYSTALLOGRAPHY: Classification of bonding in solids.
Calculation of Cohesive Energy. (2 Periods)
Space Lattice, Unit Cell, Lattice Parameters, Crystal Systems, Miller Indices,
Crystal Planes and Directions, Inter Planar Spacing of Orthogonal Crystal
Systems, Atomic Radius, Co-ordination Number and Packing Factor of
SC, BCC, FCC. X-ray diffraction by powder method. (4 Periods)
2. DEFECTS IN CRYSTALS: Point Defects: Vacancies, Substitution, Interstitial,
Frenkel and Schottky Defects; Equilibrium concentration of point defects
(vacancies, Frenkel and Schottky defects.) (4 Periods)
UNIT- II
3. ELEMENTS OF STATISTICAL MECHANICS : Distinguishable and
indistinguishable paticles. Maxwell-Boltzmann, Bose-Einstein and
Fermi-Dirac Statistics (Qualitative Treatment), Fermi-Dirac Distribution
function and its variation with temperature. Planck’s Law of Black Body
Radiation and derivation of Wien’s Law, Rayleigh-Jeans law from Planck’s
law. (5 Periods)
4. PRINCIPLES OF QUANTUM MECHANICS: Waves and Particles, de
Broglie Hypothesis , Matter Waves, Davisson and Germer Experiment,
Heisenberg ’s Uncertatinty Principle (Qualitative Treatment),
Schrodinger’s Time Independent Wave Equation - Physical Significance
of the Wave Function. Particle in One Dimensional Potential Box. (5 Periods)
UNIT-III
5. BAND THEORY OF SOLIDS: Behavior of Electron in a periodic Potential
using Bloch solution. Kronig-Penny Model (Qualitative Treatment),
Origin of Energy Bands in Solids, Classification of Materials into
Conductors, Semi Conductors & Insulators, Concept of Effective Mass of an
Electron. (5 Periods)
6. SEMICONDUCTOR PHYSICS: Fermi Levels in Intrinsic and Extrinsic
Semiconductors, Carrier Concentration in Intrinsic and Extrinsic
Semiconductors. Drift and diffusion current in semiconductors (Qualitative
22
Treatment) and Equation of Continuity, Direct & Indirect Band Gap
Semiconductors, Hall Effect and its applications. (7 Periods)
UNIT - IV
7. DIELECTRIC PROPERTIES: Definition of Electric Dipole, Dipole
Moment, Dielectric Constant, Polarizability, Electric Susceptibility,
Displacement Vector. Electronic, Ionic and Orientation Polarizations and
Calculation of Polarizabilities for Electronic and Ionic poarisations. Internal
Field in solids , Clausius - Mossotti Equation, Piezo-electricity and Ferro-
electricity, examples and applications. (7 Periods)
8. MAGNETIC PROPERTIES: Definition of Permeability, Field Intensity,
Magnetic Field Induction, Magnetization, Magnetic Susceptibility, Origin
of Magnetic Moment, Bohr Magneton, Domain Theory of Ferro
Magnetism, Hysteresis Curve, Soft and Hard Magnetic Materials, Properties
of Anti-Ferro and Ferri Magnetic Materials, Ferrites and their
Applications.Perfect diamagnetism in super condectors(Meissner effect),
Magnetic Levitation (8 Periods)
UNIT - V
9. LASERS: Characteristics of Lasers, Spontaneous and Stimulated
Emission of Radiation, Meta-stable State, Population Inversion, Lasing
Action, Einstein’s Coefficients and Relation between them, Ruby Laser,
Helium-Neon Laser, Semiconductor Diode Laser, Applications of Lasers
( LASER Cooling & ablation ). (6 Periods)
10. FIBER OPTICS: Principle of Optical Fiber, Acceptance Angle and
Acceptance Cone, Numerical Aperture, Types of Optical Fibers (Step index
and graded index fibers) and Refractive Index Profiles, Attenuation in
Optical Fibers, Application of Optical Fibers (Engineering, Medical and
Scientific fields). (3 Periods)
11. NANOTECHNOLOGY: Origin of Nanotechnology, Nano Scale,
Surface to Volume Ratio, Quantum Confinement, Bottom-up
Fabrication: Sol-gel, Top-down Fabrication: Chemical Vapour Deposition,
Characterization (XRD&TEM) and Applications. (4 Periods)
TEXT BOOKS:
1. Applied Physics - P.K.Palanisamy (SciTech Publications (India) Pvt. Ltd.,
Fifth Print 2008).
2. Applied Physics - S.O. Pillai & Sivakami (New Age International (P) Ltd.,
Second Edition 2008).
3. Applied Physics - T. Bhima Shankaram & G. Prasad (B.S. Publications,
Third Edition 2008).
4. Concepts of Modern Physics –Aurther Beiser . et.al.
23
REFERENCES:
1. Solid State Physics - M. Armugam (Anuradha Publications).
2. Modern Physics - R. Murugeshan & K. Siva Prasath - S. Chand & Co.
(for Statistical Mechanics).
3. Physics and Chemistry of Materials-Gersten, FW Smirth
4 . Material Science and Engineerin -Raghavan
5. Nanotechnology - M.Ratner & D. Ratner (Pearson Ed.).
6. Introduction to Solid State Physics - C. Kittel (Wiley Eastern).
24
ENGINEERING DRAWING
2 -/-/4 3
CHAPTER 1 . Principles of Engineering Graphics and their Significance-
Drawing Instrument and their Use- Conventions in Drawing-Lettering-
Curves used in engineering Practice and Constructions. Conic sections-
Ellipse, Parabola and Hyperbola. Construction of Cycloid, Epi-cycloid and
Hypocycloid
CHAPTER 2. Principle of orthographic projections –Conventions-First angle
and Third angle projections, Projections of Points and Lines. (Excluding
traces of a line)
CHAPTER 3. Projections of regular planes inclined to both the planes.
CHAPTER 4. Projections of regular Solids inclined to both the planes.
CHAPTER 5. Principles of Isometric Projection- Isometric Scale-Isometric
Views- Conventions- Isometric Views of Lines, Plane Figures, Simple and
compound Solids. Conversion of Isometric Views to Orthographic Views
Text Book : Engineering Drawing by N.D.Bhatt
25
COMPUTER PROGRAMMING LAB

0 -/3/- 2
Recommended Systems/Software Requirements:
Intel based desktop PC ‘gcc’ Compiler for CSE and IT branches, ‘ANSI C’
Complier for other branches.
Week l.
a) Write a C program to calculate the following Sum:
Sum=1-x2/2! +x4/4!-x6/6!+x8/8!-x10/10!
b) Write a C program to find the roots of a quadratic equation.
Week 2.
a) Write a C program to find the sum of individual digits of a positive
integer.
b) A Fibonacci Sequence is defined as follows: the first and second terms
in the sequence are 0 and 1. Subsequent terms are found by adding
the preceding two terms in the sequence. Write a C program to
generate the first n terms of the sequence.
c) Write a C program to generate all the prime numbers between 1 and
n, where n is a value supplied by the user.
Week 3
a) The total distance travelled by vehicle in ‘t’ seconds is given by
distance = ut+1/2at2 where ‘u’ and ‘a’ are the initial velocity (m/sec.)
and acceleration (m/sec2). Write C program to find the distance
travelled at regular intervals of time given the values of ‘u’ and ‘a’.
The program should provide the flexibility to the user to select his
own time intervals and repeat the calculations for different values of
‘u’ and ‘a’.
b) Write a C program, which takes two integer operands and one
operator form the user, performs the operation and then prints the
result. (Consider the operators +,-,*, /, % and use Switch Statement)
Week 4
a) Write a C program to generate Pascal’s triangle.
b) Write a C program to construct a pyramid of numbers.
Week 5
Write a C program to read in two numbers, x and n, and then compute the
sum of this geometric progression:
1+x+x2+x3+………….+xn
For example: if n is 3 and x is 5, then the program computes 1+5+25+125.
Print x, n, the sum
Perform error checking. For example, the formula does not make sense for
26
negative exponents – if n is less than 0. Have your program print an error
message if n<0, then go back and read in the next pair of numbers of without
computing the sum. Are any values of x also illegal ? If so, test for them too.
Week 6
Write a C program to implement:
i) Precedence and associativity
ii) Bit Manipulation using switch case
Week 7
Write C programs that use both recursive and non-recursive functions
i) To find the factorial of a given integer.
ii) To find the GCD (greatest common divisor) of two given integers.
iii) To solve Towers of Hanoi problem. (Recursion)
Week 8
a) 2’s complement of a number is obtained by scanning it from right to
left and complementing all the bits after the first appearance of a 1.
Thus 2’s complement of 11100 is 00100. Write a C program to find
the 2’s complement of a binary number.
b) Write a C program that uses functions to perform the following:
i) Addition & Multiplication of 2 matrices
ii Determinant of matrix and inverse of a matrix
Week 9
a) Write a C program that uses functions to perform the following
operations:
i) To insert a sub-string in to given main string from a given position.
ii) To delete n Characters from a given position in a given string.
b) Write a C program to determine if the given string is a palindrome or
not
Week 10
a) Write a C program that displays the position or index in the string S
where the string T begins, or – 1 if S doesn’t contain T.
b) Write a C program to count the lines, words and characters in a given
text.
Week 11
Write a C program that uses functions to perform the following operations:
i) Reading a complex number
ii) Writing a complex number
iii) Addition of two complex numbers
iv) Multiplication of two complex numbers
(Note: represent complex number using a structure.)
Week 12
a) Write a C program which copies one file to another.
b) Write a C program to reverse the first n characters in a file.
(Note: The file name and n are specified on the command line.)
27
ENGLISH LAB
0 -/3/- 2
The Language Lab focuses on the production and practice of sounds of
language and familiarises the students with the use of English in everyday
situations and contexts.
OBJECTIVES:
a. To expose the students to a variety of self-instructional, learner-
friendly modes of language learning.
b. To enable them to learn better pronunciation through stress on word
accent, intonation, and rhythm.
c. To train them to use language effectively to face interviews, group
discussions, public speaking.
d. To initiate them into greater use of the computer in resume
preparation, report writing, format-making etc.
SYLLABUS:
The following course content is prescribed for the English Language
Laboratory sessions:
1. Introduction to the Sounds of English- Vowels, Diphthongs &
Consonants
2. Introduction to Accent and Rhythm – Stress and Intonation
3. Pronouncing words: Important patterns
4. Situational Dialogues / Role Play
5. Presentation Skills
6. ‘Just A Minute’ Sessions (JAM)
7. Descriptions and Narrations
8. Information Transfer
9. Debating Skills
10. Telephonic conversations
11. Group Discussions
12. Interview Skills
MINIMUM REQUIREMENT:
The English Language Lab shall have two parts:
i) The Computer aided Language Lab for 30 students with 30 systems,
one master console, LAN facility and English language software for
self- study by learners.
ii) The Communication Skills Lab with movable chairs and audio-visual
28
aids with a P.A System, a Multimedia Projector a digital stereo – audio
& video system and camcorder etc.
SYSTEM REQUIREMENT (HARDWARE COMPONENT):
Computer network with Lan with minimum 30 multimedia systems with
the following specifications:
i) CPU Requirements
a) Duel Core Processor
b) Speed – 2.8 GHZ
c) RAM – 1 GB Minimum
d) Hard Disk – 80 GB Minimum
e) DVD ROM Drive
ii) Headphones of High quality
SUGGESTED SOFTWARE:
• Cambridge Advanced Learners’ English Dictionary with CD.
• Murphy’s English Grammar with CD, Cambridge University, Press.
• Pronunciation in Use by Mark Hancock, Cambridge University Press.
• Test Your English Vocabulary in Use by Michael Mc Carthy and Felicity
O’Dell, Cambridge University Press.
• BBC Speak English
REFERENCES:
1. A Practical Course in English Pronunciation, (with two Audio cassettes)
by J. Sethi, Kamlesh Sadanand & D.V. Jindal, Prentice-Hall of India Pvt.
Ltd., New Delhi.
2. A text book of English Phonetics for Indian Students by
T.Balasubramanian (Macmillan).
3. Speak Well Published by Orient Blackswan Private Limited, 2012.
DISTRIBUTION AND WEIGHTAGE OF MARKS
English Language Laboratory Practical Paper:
1. The practical examinations for the English Language Laboratory shall
be conducted as per the norms stipulated for the core engineering
practical sessions.
2. For the Language lab sessions, there shall be a continuous evaluation
during the semester for 25 sessional marks and 50 year-end
Examination marks. Of the 25 marks, 15 marks shall be awarded for
day-to-day work and 10 marks to be awarded by conducting Internal
Lab Test(s). The year- end Examination shall be conducted by the
teacher concerned with an external examiner from the other
Universities or colleges.
29
ENGINEERING PHYSICS LAB

0 -/3/- 2
List of the Experiments
1. Dispersive power of the material of a Prism – Spectrometer.
2. Determination of wavelength of a source – Diffraction Grating (Normal
-Incidence).
3. Size of the particle and Quantum Confinement.
4. Time constant of R-C Circuit.
5. Magnetic field along the axis of the current carrying coil- Stewart
&Gees’
6. Evaluation of Numerical Aperture
7. Evaluation Bending losses of fibers.
8. Energy gap of a Semiconductor material .
9. Torsional pendulum
10. Laser wavelength determination using Diffraction grating.
11. Dielectric constant.
12. Hall effect –simulation.
TEXT BOOKS:
1. Practical Enginieering Physics by T.Radha Krishna & V. Rajeshwar Rao
(VGS Techno Series)
2. Laboratry Manual of Engineering Physics by Dr. Y. Aaprna & Dr.
K. Venkateswara RAO (SM Enterprises.)
REFERENCE BOOKS:
1 Experiments in Engineerin Physics by MN Avadhanlu, AA Dani, PM
Polkey - S.C HAND
30
MATHEMATICS – II
I Year - II Sem. L T/P/D C
4 1/-/- 4
OBJECTIVE : The prime objective of this course is to solve linear and
nonlinear systems by using the concepts in Matrices and numerical
methods.
UNIT – I
SOLUTION FOR LINEAR SYSTEMS : Real matrices: Symmetric, Skew-
Symmetric and Orthogonal - Complex matrices: Hermitian, Skew-Hermitian
and Unitary - Elementary Row Transformations – Rank - Echelon form -
Normal form - Solutions of Linear Systems: By Rank Concept, LU
Decomposition, and Solution of Tridiagonal Systems.
UNIT – II
LINEAR TRANSFORMATIONS : Eigen values, Eigen vectors – Properties –
Cayley-Hamilton Theorem (without proof) - Inverse and Powers of a Matrix
by Cayley-Hamilton theorem – Diagonolization of matrix - Calculation of
Powers of matrix – Modal and Spectral Matrices.
QUADRATIC FORMS: Reduction of Quadratic form to Canonical form - Linear
Transformation – Orthogonal Transformation – Rank, Index, and Signature
– Sylvester’s Law of Inertia (without proof).
UNIT – III
SOLUTION OF NON- LINEAR SYSTEMS & CURVE FITTING : Solution of
Algebraic and Transcendental Equations: Introduction – The Bisection
Method – The Method of False Position – The Iteration Method – Newton-
Raphson Method.
CURVE FITTING: F itting a Straight line – Second Degree Curve-
Exponentional curve - Power Curve by the Method of Least Squares.
UNIT – IV
INTERPOLATION : Introduction - Errors in Polynomial Interpolation – Finite
Differences- Forward Differences - Backward Differences–Central Differences
-Symbolic Relations and Separation of Symbols - Difference Equations-
Differences of a Polynomial - Newton’s Formulae for Interpolation–Central
Difference Interpolation Formulae: Gauss Central Difference Formulae-
Interpolation with Unevenly Spaced Points: Lagrange’s Interpolation
formula, Newton’s Divided Difference Interpolation Formula
UNIT – V
NUMERICAL SOLUTION OF IVP’S IN ODE : Numerical Differentiation –
Numerical Integration: Simpson’s 3/8 Rule, Gaussian Integration.
31
Numerical Solution of Ordinary Differential equations: Taylor’s series
Method-Picard’s Method of Successive Approximations – Euler’s Method,
Modified Euler’s Method - Runge-Kutta Method – Predictor-Corrector
Methods: Adams-Bashforth-Moulton (ABM) Method.
TEXT BOOKS:
2. Advanced Engineering Mathematics by Kreyszig, Wiley Publications.
3. Higher Engineering Mathematics by B.S. Grewal, Khanna Publications.
REFERENCES:
1. Introductory Methods by Numerical Analysis by S.S.Sastry, PHI Learning
Pvt. Ltd.
2. Mathematical Methods by B.V.Ramana, Tata McGraw Hill Publications.
3. Mathematical Methods by Dr.Shahnaz Bathul, PHI Learning Pvt, Ltd
(in press)
32
MATHEMATICS – III
4 1/-/- 4
OBJECTIVE : The core objective of this paper is to solve the differential
equations by using analytical methods and integral transform methods.
UNIT – I
LINEAR DIFFERENTIAL EQUATIONS WITH CONSTANT COEFFICIENTS &
APPLICATIONS : Linear differential equations with constant coefficients -
Method of Variation of Parameters.
Applications in Electrical Circuits, Simple Harmonic Motion.
UNIT – II
LAPLACE TRANSFORMS & ITS APPLICATIONS TO ORDINARY DIFFERENTIAL
EQUATIONS : Laplace Transform of Standard Functions - First and Second
Shifting Theorems - Transform of Derivatives and Integrals – Multiplication
and Division by ‘t’ -Laplace Transform of a Periodic Function - Unit Step
Function - Dirac’s Delta Function – Inverse Laplace Transform– Method of
Partial Fractions - Convolution Theorem - Application of Laplace Transforms
to Ordinary Differential Equations.
UNIT – III
FOURIER SERIES & FOURIER TRANSFORMS : Fourier Series: Determination
of Fourier Coefficients – Fourier Series – Even and Odd Functions – Fourier
Series in an Arbitrary Interval – Even and Odd Periodic Continuation – Half-
Range Fourier Sine and Cosine Expansions.
FOURIER TRANSFORMS : Fourier Sine and Cosine Transforms – Properties
– Inverse Transforms – Convolution Theorem – Parseval’s Identity.
UNIT – IV
PARTIAL DIFFERENTIAL EQUATIONS : Introduction - Formation of Partial
Differential Equation: By Elimination of Arbitrary Constants and Arbitrary
Functions - Solution of First Order Equations: Linear (Lagrange’s) Equations
- Nonlinear (Standard type) Equations and Charpit’s Method
Second Order Partial Differential Equations: Method of Separation of
Variables – One Dimensional Wave Equation – One Dimensional Heat
Equation - Laplace Equation in Two Variables - Transmission Lines.
UNIT – V
APPLICATIONS OF LAPLACE AND FOURIER TRANSFORMS IN IVPS & BVPS :
Applications of Laplace Transforms in IVPs and BVPs: Heat Equation - Wave
Equation – Laplace Equation.
Applications of Fourier Transforms in IVPs and BVPs: Infinite Fourier
33
Transforms – Choice of Infinite Sine or Cosine Transforms Examples.
TEXT BOOKS:
REFERENCES:
1. Mathematical Methods by B. V. Ramana, Tata McGraw Hill
Publications.
2. Integral Transforms by I.N. Sneddon, TATA McGraw Hill Edition.
3. Mathematical Methods by Dr.Shahnaz Bathul, PHI Learning Pvt, Ltd
(in press).
34
ELECTRICAL CIRCUITS
4 1/0/0 4
OBJECTIVE : This course introduces the basic concepts of circuit analysis
which is the foundation for all the subjects of the Electrical Engineering
discipline. The emphasis in this course is laid on the basic Analysis of circuits
which includes single phase circuits, magnetic circuits, theorems and
network topology.
UNIT - I
ANALYSIS OF ELECTRICAL CIRCUITS : Circuit concept – R-L-C Parameters –
Voltage & Current Sources – Independent and dependent sources – Source
Transformation - Voltage-Current relationships for passive elements (for
different input signals – square, ramp, saw tooth, triangular)
Kirchoff’s laws – Network reduction techniques – series, parallel, series
parallel, star to delta & delta to star conversion, Nodal analysis, mesh
analysis, Super node & super mesh for DC excitations
UNIT - II
SINGLE PHASE AC CIRCUITS : RMS & Average Values and form Factor for
different periodic wave forms, Steady state Analysis of R, L, & C (in series,
parallel and series parallel combinations) with sinusoidal excitation –
Concept of Reactance, Impedance, Susceptance and Admittance – Phase &
phase difference-Concept of power factor, Real & reactive powers – j-
Notation, Complex and Polar forms of representation, Complex Power
Locus Diagrams-Series R-L, R-C, R-L-C and parallel combination with variation
of various parameters-Resonance – series, parallel circuits, Concept of
bandwidth and Q factor.
UNIT - III
MAGNETIC CIRCUITS : Magnetic Circuits- Comparision of Electric &
Magnetic Circuits-Analysis of series and parallel magnetic circuits -
Composite magnetic circuits.
Concept of self & mutual inductance - dot convention - Coefficient of
coupling – Elementary treatment of Coupled circuits
UNIT - IV
NETWORK TOPOLOGY : Definitions – Graph – Tree, Basic cutset & basic
tieset matrices for planar networks – Loop & nodal methods of Analysis of
Networks with dependent & independent voltage & current sources –
Duality & dual networks
35
UNIT - V
NETWORK THEOREMS (AC & DC EXCITATIONS) : Tellegan’s, Superposition,
Reciprocity, Thevenin’s, Norton’s, Maximum Power Transfer, Millman’s and
Compensation theorems for AC & DC excitations
TEXT BOOKS :
1. Engineering Circuit Analysis by William Hayt and Jack E. Kemmerly,
Mc Graw Hill Company, 6th edition.
2. Circuits & Networks by A. Sudhakar and Shyammohan S.Palli, Tata Mc
Graw- Hill.
3. Electical circuits by A.Chakrabarthy, Dhanipat Rai & sons.
REFERENCE BOOKS:
1. Network Analysis by M.E.Van Valkenberg.
2. Linear Circuit Analysis (time domain phasor and Laplace transform
approaches) Spend edition by Raymond a.Decarlo and PEN-Min-LIN,
Oxford University press. Second 2004.
3. Electric Cirucit theory by K.Rajeswaran, Person Education 2004.
4. Basic Circuit Analysis by D.R.Cunningham & J.A Stuller, Jaico Publication.
36
ENGG. CHEMISTRY
4 -/- 4
OBJECTIVES:
1. To furnish the conceptual understanding of the basic principles of
chemistry.
2. To develop the habit of scientific reasoning in students so that they
can work with open and inquiring mind.
3. To impart extensive knowledge of the subject to make them understand
the role of chemistry in the field of Engineering.
4. To develop analytical capabilities of chemistry so that they can apply
knowledge gained in solving engineering related problems.
UNIT - I
ELECTRO CHEMISTRY AND CORROSION: Conductance-Specific
conductance, Equivalent conductance, Molar conductance, Effect of dilution
on conductance, measurement of electrolytic conductance. Galvanic cell,
cell notation, concept of electrode potential, Nernst equation and its
applications. Types of Electrodes-Hydrogen, Calomel electrodes. Single
electrode potential, Measurement of cell EMF and its applications. Galvanic
series and Electrochemical series and its significance. Determination of PH
by using Quinhydrone and Glass electrodes. Concentration cells- Electrolytic
concentration cell & its applications, numerical problems.
Introduction to Corrosion, causes and effects of corrosion. Theories of
corrosion- Chemical and Electrochemical corrosion with mechanism.Types
of corrosion-Galvanic,Waterline & Granular corrosion. Factors affecting rate
of corrosion (i)Nature of metal – galvanic series & nature of corrosion
product (ii) Nature of environment – effect of temperature, P H ,
Humidity.Corrosion control methods – Cathodic protection- Sacrificial anode
& Impressed current cathodic methods, Metallic coatings- Hot dipping-
Galvanisation,Tinning, Metal Cladding & Cementation. (16 hrs)
UNIT - II
WATERTECHNOLOGY: Introduction, Hardness- Causes, units & types of
hardness. Estimation of temporary & permanent hardness of water by EDTA
method, numerical problems. Boiler Troubles- Scales& Sludge formation,
Priming & Foaming, Caustic embrittlement,, Boiler Corrosion .Softening of
water -Internal treatment & External treatment – Lime soda process,
Zeolites, Ion exchange process,numerical problems. Specifications &
Treatment of potable water. (12hrs)
37
UNIT-III
POLYMERS: Introduction , Types of polymerization, Mechanism (Chain
growth- Free radical mechanism & step growth). Plastics-Thermoplastic
resins & Thermoset resins, Compounding & Fabrication of plastics.
Preparation, properties and engineering applications of PVC, Teflon, Bakelite
& Nylon. Conducting polymers: conduction and its applications of
Polyacetylene, Polyaniline. Rubber: Natural rubber- Processing &
Vulcanization . Elastomers-Buna-S & Thiokol rubber. Bio degradable
polymers-example and uses, Fibers- Polyester and Polyacrylonitile and their
applications. (10 hrs)
UNIT-IV
ENERGY SOURCES: Introduction, Chemical Fuels-classification, solid fuels-
coal,analysis of coal– proximate and ultimate analysis. Liquid fuels-
petroleum, refining of petroleum. Cracking-Thermal & Catalytic cracking ,
Synthetic petrol-Bergius & Fischer Tropsech’s process, Knocking- Octane &
Cetane number. Gaseous fuels – Natural gas, Calorific value of fuel-HCV,
LCV, Dulong formula. Determination of calorific value by Junker’s
calorimeter, Combustion problems. Analysis of flue gas by Orsat’s method.
(13 hrs)
UNIT-V
MATERIAL CHEMISTRY: Introduction , Cement: Composition of Portland
cement , Setting and Hardening of cement (reactions). Lubricants-
mechanism of lubrication, Properties of lubricants- Viscosity & its
determination by Red wood viscometer, Flash and Fire point& its
determination by Pensky-Marten’s apparatus, Cloud point & pour point.
Refractories- Introduction , Classification & properties-refractoriness & RUL
test, Ceramics-Porcelain.
BATTERIES: Primary cells: zinc-carbon , Secondary cells: Lead-acid storage
cell & Ni-Cd cell. Fuel cell: Hydrogen – Oxygen fuel cell. (9 hrs)
TEXT BOOKS:
1. A text book of Engineering Chemistry – Dr. Y. Bharathi Kumari & Dr.Ch.
Jyotsna Cherukuri.
2. Engineering chemistry by P.C.Jain &Mounica Jain,Dhanpatrai
publishing company(2008).
3. Text book of Engineering chemistry- Shashi chawla,Dhanpatrai
publishing company,NewDelhi(2008)
REFERENCE BOOKS:
1. Text book of Engineering chemistry by C.P.Murthy, C.V.Agarawal,
A.Naidu B.S.Publications, Hyd(2006).
38
2. Text of Engineering chemistry by S.S.Dara and Mukkanti, S.Chand and
Co, New Delhi(2006)
3. Engineering chemistry by B.Shivashankar,Mc.Graw Hill publishing
company limited, NewDelhi(2006).
4. Engineering chemistry J.C.Kuriacase & J.Rajaram, TataMc GrawHills co.,
NewDelhi(2004)
5. Chemistry of Engineering materials by R.P.Mani and K.N.Mishra,
CENGAGE learning.
6. Applied chemistry-a text for Engineering and technology-Springar
(2005)
7. Engineering chemistry–R.Gopalan, D.Venkatappayya, D.V.Sulochana
Nagarajan- Vikas publishers(2008).
8. Elements of Physical chemistry by B.R.Puri, L.R .Sharma and M.S.
Pathania-2nd edition, vishal publishing co.
39
DATA STRUCTURES
4 1/-/- 4
UNIT - I
Searching: Linear and binary search methods.
Sorting: Bubble sort, selection sort, Insertion sort, Quick sort, Merge sort,
Heap sort, Shell sort, Radix sort. Time complexities.
UNIT - II
Stacks, Queues, Circular queues, Dequeues working and representation
using arrays, Applications of stacks :infix to post fix conversion, postfix
expression evaluation.
UNIT - III
Linked list: Singly linked list, Doubly linked list, Circular linked list working
and representation using pointers. Implementation of stacks and queues
using pointers.
UNIT - IV
Trees: Terminology, sequential and linked representation, tree traversals.
Binary trees, Binary search trees.
UNIT - V
Graphs: Terminology, sequential and linked representation, graph traversals
: Depth First Search & Breadth First Search implementation. Spanning trees,
Prims and Kruskals method.
TEXT BOOKS:
1. Computer science, A structured programming approach using C, B.A.
Forouzan and R.F. Gilberg, Third edition, Thomson.
2. Data Structures Using C– A.S.Tanenbaum, Y. Langsam, and M.J.
Augenstein, PHI/Pearson education.
REFERENCES :
1. C Programming & Data structures – E. Balaguru Swami, TMH
2. The C Programming Language, B.W. Kernighan, Dennis M.Ritchie, PHI/
Pearson Education
3. C Programming with problem solving, J.A. Jones & K. Harrow,
dreamtech Press
4. Let us C – Yeswanth Kanithkar.
40
ENGINEERING CHEMISTRY LAB

0 -/3/- 2
List of Experiments
Any 10 Experiments of the Following:
1. Estimation of Ferrous ion by dichrometry by using Mohr’s salt
2. Estimation of hardness of water by EDTA method
3. Estimation of manganese dioxide in pyrolusite
4. Determination of surface tension of lubricants
5. Titration of strong acid VS strong base by conductometric method
6. Titration of strong acid VS strong base by potentiometric method
7. Estimation of Copper by Colorimetric method
8. Estimation of Iron in Cement by Colorimetric method
9. Conductometric titration of mixture of acids Vs strong base
10. Determination of viscosity of sample oil by Ostwald’s viscometer
11. Determination of dissociation constant of weak acid by
Conductometric method.
12. Preparation of Thiokol rubber
TEXT BOOKS:
1. Laboratory Manual of Engineering Chemistry by Dr. Y. Bharathi Kumari
& Ch. Jyotsna V.G.S Book links.
2. Practical Engineering Chemistry by K.Mukkanti, etal, B.S. Publications,
Hyderabad
3. Inorganic quantitative analysis, Vogel
REFERENCE BOOKS:
1. Text Book of Engineering chemistry by R.N. Goyal and Harrmendra
Goel
2. A text book on experiments and calculation Engg. S.S. Dara
3. Instrumental methods of chemical analysis, Chatwal, Anand, Himalaya
Publications
41
ELECTRICAL CIRCUITS LAB

0 0/3/0 2
Any Ten experiments have to be conducted from the following list:
1) Thevenin’s, Norton’s
2) Maximum Power Transfer theorems .
3) Superposition theorem
4) RMS value of complex wave
5) Verification of Compensation Theorem.
6) Reciprocity , Millmann’s Theorems.
7) Locus Diagrams of RL and RC Series Circuits
8) Series and Parallel Resonance
9) Determination of Self, Mutual Inductances and Coefficient of coupling
10) Measurement of Active Power for Star and Delta connected balanced
loads
11) Measurement of Reactive Power for Star and Delta connected balanced
loads
12) Measurement of 3-phase Power by two Wattmeter Method for
unbalanced loads
42
DATA STRUCTURES LAB

I Year B.Tech II-Sem L T/P/D C
0 -/3/- 2
Week 1
Write C programs that use both recursive and non recursive functions to
perform the following searching operations for a Key value in a given list of
integers:
i) Linear search ii) Binary search
Week 2
Write C programs that implement the following sorting methods to sort a
given list of integers in ascending order:
i) Bubble sort ii) Selection sort
Week 3
Write C programs that implement the following sorting methods to sort a
given list of integers in ascending order:
i) Insertion sort ii) Quick Sort
Week 4
Write C programs that implement stack (its operations) using
i) Arrays ii) Pointers
Week 5
Write C programs that implement Queue (its operations) using
i) Arrays ii) Pointers
Week6
Write a program to convert the given infix expression to post-fix expression.
Week7
Write a program to evaluate a post-fix expression.
Week8
Write C programs to implement the following using arrays
i) Circular queue ii) Dequeue
Week 9
Write a C program that uses functions to perform the following operations
on singly linked list:
i) Creation ii) Insertion iii) Deletion iv) Traversal
Week 10
on doubly linked list.:
43
i) Creation ii) Insertion iii) Deletion iv) Traversal in both ways
Week11
on circular linked list:
i) Creation ii) Insertion iii) Deletion iv) Traversal
Week 12
Write a C program that uses functions to perform the following:
i) Creating a Binary Tree of integers
ii) Traversing the above binary tree in preorder, in order and post order.
TEXT BOOKS
1. Computer science, A structured programming approach using C, B.A.
Forouzan and R.F. Gilberg, Third edition, Thomson.
2. Programming in C, P.Dey & M. Ghosh, Oxford Univ.Press.
3. C and Data Structures, E Balaguruswamy, TMH publications.
44
MATHEMATICS – IV
II YEAR B.Tech EEE I-Sem L T/P/D C
4 1/0/0 4
OBJECTIVE: The objective of this course is to study the special functions,
analytic functions and to solve the problems in complex variable theory.
UNIT- I
SPECIAL FUNCTIONS I : Gamma and Beta Functions – Their properties –
Evaluation of improper integrals. Bessel functions – properties – Recurrence
relations – Orthogonality.
Legendre’s polynomials - Properties – Rodrigue’s formula – Recurrence
relations – Orthogonality.
UNIT-II
FUNCTIONS OF A COMPLEX VARIABLE : Continuity-Differentiability -
Analyticity - Properties – Cauchy-Riemann equations in Cartesian and Polar
coordinates-Harmonic and Conjugate Harmonic functions-Milne-
Thompson’s method. Elementary functions - Logarithmic & Power functions
UNIT-III
COMPLEX INTEGRATION & POWER SERIES : Cauchy’s integral theorem –
Cauchy’s integral formula – Generalized integral formula. Radius of
convergence – Expansion in Taylor’s series and Laurent series - Singular
point - Isolated singular point – Pole of order m – Essential singularity.
UNIT-IV
CONTOUR INTEGRATION : Residue – Evaluation of residue by formula and
by Laurent series – Cauchy Residue theorem.
Evaluation of integrals of the type
∞
(a) Improper real integrals ∫−∞
f ( x ) dx
c + 2π
(b) ∫
c
f (cos θ , sin θ )dθ
∞
(c) ∫
−∞
e imx f ( x ) dx
(d) Integrals by indentation.
UNIT - V
CONFORMAL MAPPING : Transformation by e z , z n (n positive integer),
45
Sin z, z + a/z. Translation, rotation, inversion and bilinear transformation –
Fixed point – Cross ratio – Properties – Invariance of circles and cross ratio
– Determination of bilinear transformation mapping 3 given points .
TEXT BOOKS:
Narosa Publications.
REFERENCES:
1. Higher Engineering Mathematics by B. V. Ramana, Tata McGraw Hill
Publications.
2. Engineering Mathematics Vol-III by T.K.V.Iyengar, B.Krishna Gandhi,
S.Ranganatham and MVSSN Prasad, S.Chand Publications.
3. Special Functions & Complex Variables by Dr. Shahnaz Bathul, PHI
learning Pvt. Ltd.
46
FLUID MECHANICS AND HYDRAULIC MACHINERY

3 1/0/0 3
OBJECTIVES:
1. The purpose of this course is to learn the Fluid properties and
fundamentals of Fluid statics and fluid flow. Now a days the principles
of Fluid mechanics find wide applications in many situations directly
or indirectly.
2. To introduce the concepts of flow measurements and flow through
pipes.
3. To further extended to cover the application of fluid mechanics by the
inclusion of fluid machinery especially water turbine and water pumps.
4. To impart of fluid machinery, turbines, pumps in general and in power
stations in getting as accelerated fill up. Thus there is a great relevance
for this curse for Electrical and Electronic Engineering.
UNIT - 1
Fluid Statics, Kinematics and Dynamics : Fluid Statics: Dimensions and
units: physical properties of fluids– density, specific gravity, viscosity and
surface tension- vapor pressure and their influence on fluid motion-
atmospheric gauge pressure and vacuum pressure, measurement of
pressure – Piezometer, U-tube and Differential manometers.
Fluid kinematics : Stream line, path line, streak lines and stream tube,
classification of flows – steady, unsteady, uniform, non uniform, laminar,
turbulent, rotational and irrotational flows- Equation of continuity for one
dimensional flow.
Fluid dynamics : Surface and body forces-Euler and Bernoulli’s equations
for flow along a stream line, momentum equation and its application on
force on pipe bend.
UNIT - 2
Closed conduit flows : Reynolds experiment- Darcy -Weisbach equation-
Minor losses in pipes- pipes in series and pipes in parallel, total energy line
and hydraulic gradient line. Measurement of flows: pitot tube, venturimeter,
Orifice meter and flow nozzle.
UNIT - 3
Basics of turbo machinery : Elements of hydroelectric power station and
concept of pumped storage plants and storage plants, Mass curve
(explanation only).
Hydro dynamic force of jets on stationary and moving flat , inclined and
47
curved vanes, Jet striking centrally and at tip, velocity diagrams, work done
and efficiency, flow over radial vanes.
UNIT - 4
Hydraulic Turbines : Classification of hydraulic turbines-working principle
of – Pelton wheel, Francis and Kaplan turbines, velocity triangles and work
done by water on runner-hydraulic design - draft tube theory, functions
and efficiency. Geometric similarity, units and specific quantities, governing
of turbines, Characteristic curves, selection of type of turbine, cavitation,
surge tank and water hammer.
UNIT - 5
Centrifugal pumps : Classification, working principle of centrifugal pump,
work done- manometric head-losses and efficiencies- specific speed of
pump and pumps in series and parallel- performance characteristic curves,
NPSH.
TEXT BOOKS:
1. Hydraulics and Fluid Mechanics Including Hydraulic Machines-
P.N.MODI and S.M.SETH.
2. Fluid Mechanics and Hydraulic Machines – RAJPUT.
3. Fluid Mechanics and Hydraulic Machines – R.K.BANSAL
4. Fluid Mechanics and Hydraulic Machines – RAMJEE
REFERENCE BOOKS:
1. Fluid Mechanics and Fluid Power Engineering by D.S.Kumar, Kotaria &
Sons
2. Fluid Mechanics and Machinery by D.Rama Durgaiah, New Age
International
3. Hydraulic Machines by Banga & Sharma, Khanna Publishers.
4. Introduction to Fluid Mechanics by James A. Fay
48
ELECTRONIC DEVICES AND CIRCUITS

(Common to ECE, EEE, CSE, ICE, IT, ETM)
4 1/0/0 4
OBJECTIVES : This course aims to give the detailed knowledge of basic
devices used in Electronic Circuits and Systems. Mainly emphasizes on
construction, working, principle of operation, symbols, equivalent circuits,
characteristics, applications of devices like p-n Junction diode, Zener diode,
BJT, FET, MOSFET, Tunnel diode, Varactor diode, Schottky Barrier Diode,
Semiconductor Photo Diode, Photo Transistor, LED, PIN Diode, UJT, SCR
and small signal modeling of BJTs and FETs.
UNIT - I
P-N JUNCTION DIODE, RECTIFIERS AND FILTERS : Qualitative Theory of p-
n Junction , p-n Junction as a Diode, Diode Equation, Volt-Ampere
characteristics, Temperature dependence of V-I characteristics, Ideal versus
practical -Resistance levels(Static &Dynamic), Transition and Diffusion
Capacitances, Diode Equivalent circuits, Hall effect, Load Line Analysis,
Breakdown Mechanism in Semiconductor Diodes, Zener Diode
Characteristics.
P-n junction as a Rectifier, Half wave Rectifier, Full Wave Rectifier, Bridge
rectifier, Harmonic components in a Rectifier circuit, Inductor Filters,
Capacitor Filters, L-Section Filters, “-Section filters, Comparison of Filters,
Voltage Regulation using Zener Diode.
UNIT - II
BIPOLAR JUNCTION TRANSISTOR, TRANSISTOR BIASING AND
STABILIZATION : The Junction Transistor, Transistor Current Components,
Transistor as an Amplifier, Transistor Construction, BJT Operation, BJT
Symbol, Common Base, Common Emitter and Common Collector
Configurations, Limits of Operation, BJT Specifications.
Operating Point, The DC and AC Load lines, Need for Biasing, Fixed Bias,
Collector Feedback Bias, Emitter Feedback Bias, Collector-Emitter Feedback
bias, Voltage Divider Bias, Bias Stability ,Stabilization Factors, Stabilization
against variations in VBE and ², Bias Compensation using Diodes and
Transistors, Thermal Runaway, Thermal Stability.
UNIT - III
SMALL SIGNAL LOW FREQUENCY BJT MODELS : BJT Hybrid Model,
Determination of h-parameters from Transistor Characteristics, Analysis
of Transistor Amplifier using h-Parameters, Comparison of CB,CE and CC
Amplifier Configurations.
49
UNIT - IV
FIELD EFFECT TRANSISTOR AND FET AMPLIFIERS : The Junction Field Effect
Transistor (Construction, principle of operation, symbol), Pinch-off Voltage,
Volt-Ampere characteristics, Differences between JFET & MOSFET, MOSFET
(Construction, principle of operation, symbol), MOSEFT Characteristics in
Enhancement & Depletion modes, differences between EMOSFET &
DMOSFET.
FET Biasing (Fixed bias, Self Bias, Voltage Divider Bias & Feedback Bias),
JFET Small Signal Model, Analysis of Common Source Amplifier, Common
Drain amplifier, Generalized FET amplifier, FET as Voltage Variable Resistor,
Comparison of BJT & FET.
UNIT- V
SPECIAL PURPOSE ELECTRONIC DEVICES : Principle of Operation and
Characteristics of Tunnel Diode (with help of Energy Band Diagram) and
Varactor Diode, Principle of Operation of Schottky Barrier Diode,
Semiconductor Photo Diode, Photo Transistor, LED, PIN Diode, UJT, SCR.
OUTCOMES : The completion of the course enables to understand
construction, working, symbols, principle of operation, characteristics,
modeling and applications of most important electronic devices of Electronic
circuits and Systems.
TEXT BOOKS
1. Milliman’s Electronic Devices and Circuits - J. Milliman, C. C. Halkias
and Satyabrata Jit, 2ed,1998, TMH.
2. Electronic Devices and Circuits -R. L. Boylestad and Louis Nashelsky,
9ed, 2006, PEI/PHI.
3. Introduction to Electronic Devices and Circuits –Rober T.Paynter,PE.
REFERENCES
1. Integrated Electronics - J.Milliman and Christors C.Halkias,1991, ed
2008, TMH
2. Electronic Devices and Circuits-Klal Kishore, 2 ed, 2005, BSP.
3. Electronic Devices and Circuits –Anil K.Maini, Varsha Agrawl,1 ed, 2009,
Wiley India Pvt. Ltd
4. Electronic Devices and Circuits - S.Salivahanan, N.Suresh Kumar,
A.Vallavaraj, 2 ed., 2008, TMH.
5. Electronic Devices and Circuits- A.P.Godse, U.A.Bakshi, Technical
50
NETWORK THEORY
3 1/0/0 3
OBJECTIVE : This course introduces the basic concepts of Network Theory
which is the foundation for all the subjects of the Electrical Engineering
discipline. The emphasis in this course is laid on the three phase circuits ,
Analysis of Transients and two port networks , filters and Fourier analysis.
UNIT - I
THREE PHASE CIRCUITS : Three phase circuits: Phase sequence- Star and
delta connection-Relation between line and phase voltages and currents
in balanced systems-Analysis of balanced three phase circuits- Three Phase
3 wire and 4 wire unbalanced loads - Displacement neutral method -
Measurement of Active and Reactive power in balanced & unbalanced three
phase systems. – Two Wattmeter Method of measurement of three phase
power.
UNIT - II
TRANSIENT ANALYSIS : Transient response of R-L, R-C, R-L-C series circuits
for D.C excitation-Initial conditions-solution method using differential
equation and laplace transforms,
Transient response of R-L, R-C, R-L-C series circuits for sinusoidal excitations-
Initial conditions-Solution method using differential equations and laplace
transforms - Response of R-L & R-C & R-L-C networks to pulse excitation.
UNIT - III
TWO PORT PARAMETERS : Two port network parameters – Z, Y, ABCD and
hybrid parameters and their relationships – Conditions for symmetricity &
reciprocity - Transform networks, Interconnection of two port networks -
series, parallel, series parallel & Cascaded connections of two port networks.
Image parameters, T, À and lattice networks.
UNIT - IV
FILTERS : Symmetrical networks – Characteristic impedance – Attenuation
constant, phase constant & propagation constant - Low pass, High pass,
Band pass, Band elimination Filters - Prototype (constant K) filters,
Limitations of Prototype filters - m-derived filters - Composite filters.
UNIT - V
FOURIER ANALYSIS AND NETWORK FUNCTIONS : Fourier theorem,
consideration of symmetry, line spectra and phase angle spectra. Fourier
Integrals and Fourier Transforms – properties of Fourier Transforms .
complex frequency, network functions, significance of poles and zeros. Time
domain response from pole- zero plot.
51
TEXT BOOKS:
1. Engineering Circuit Analysis by William Hayt and Jack E.Kemmerley,Mc
Graw Hill Company, 6th edition
REFERENCE BOOKS:
1. Network Theory by A. Sudhakar and Shyammohan S Palli, Tata McGraw-
Hill Publications, first edition
2. Network Analysis by N.C.Jagan, C.Lakshmi Narayana,BS Publications,2nd
edition
3. Network Analysis and synthesis by Somanathan Nair and S.R.Deepa,
Elsvier Publications.
52
ELECTRICAL MEASUREMENTS
3 1/0/0 3
OBJECTIVE : Electrical measurements course introduces the basic principles
of all measuring instruments. It also deals with the measurement of RLC
parameters voltage, current Power factor, power, energy and magnetic
measurements.
UNIT - I
MEASURING INSTRUMENTS : Classification – deflecting, control and
damping torques – Ammeters and Voltmeters – PMMC, moving iron type
instruments – expression for the deflecting torque and control torque –
Errors and compensations, extension of range using shunts and series
resistance. Electrostatic Voltmeters-electrometer type and attracted disc
type.
UNIT –II
INSTRUMENT TRANSFORMERS AND POTENTIOMETERS : CT and PT – Ratio
and phase angle errors – design considerations Type of P.F. Meters –
dynamometer and moving iron type – 1-ph and 3-ph meters – Frequency
meters – resonance type and Weston type
Principle and operation of D.C. Crompton’s potentiometer – standardization
– Measurement of unknown resistance, current, voltage.
A.C. Potentiometers: polar and coordinate types standardization –
applications.
UNIT –III
MEASUREMENT OF POWER AND ENERGY : Single phase dynamometer
wattmeter, LPF and UPF, Double element and three element dynamometer
wattmeter, expression for deflecting and control torques – Extension of
range of wattmeter using instrument transformers – Measurement of active
and reactive powers in balanced.
Single phase induction type energy meter – driving and braking torques –
errors and compensations – testing by phantom loading using R.S.S. meter.
Three phase energy meter – Measurement of volt-amp hours , trivector
meter, maximum demand meters.
UNIT – IV
MEASUREMENT OF RESISTANCE AND IMPEDANCE USING BRIDGES:
Method of measuring low, medium and high resistance – wheatstone bridge
- sensitivity of Wheatstone’s bridge – limitations of wheatstone’s bridge –
kelvin’s double bridge -Carey Foster’s bridge, measurement of high
resistance – loss of charge method.
53
Measurement of self inductance, Quality Factor - Maxwell’s bridge, Hay’s
bridge, Anderson’s bridge, Owen’s bridge. Measurement of Mutual
Inductance - Campbell’s bridge and Heaviside bridge . Measurement of
capacitance and loss angle - Desauty bridge , Schering Bridge. Measurement
of frequency - Wien’s bridge .
UNIT – V
MAGNETIC MEASUREMENTS : Ballistic galvanometer – equation of motion
– calibration -flux meter – constructional details, comparison with ballistic
galvanometer. Determination of B-H Loop methods of reversals six point
method – A.C. testing – Iron loss of bar samples Lloyd fisher magnetic
square– core loss measurements by bridges and potentiometers.
TEXT BOOK :
1. Electrical Measurements and measuring Instruments – by E.W. Golding
and F.C. Widdis, fifth Edition, Wheeler Publishing.
2. Electrical & Electronic Measurement & Instruments by A.K.Sawhney
Dhanpat Rai & Co. Publications.
REFERENCE BOOKS:
1. Electrical Measurements – by Buckingham and Price, Prentice – Hall
2. Electrical Measurements by Harris.
3. Electrical Measurements: Fundamentals, Concepts, Applications – by
Reissland, M.U, New Age International (P) Limited, Publishers
54
ELECTRICAL MACHINES – I
4 1/0/0 4
UNIT – I
BASIC CONCEPTS OF DC MACHINES : Energy balance in Electromechanical
energy conversion systems, force and torque in a single excited magnetic
system. Constructional features of DC machines, Lap and wave windings,
induced emf, torque expression , Electrical and mechanical power,
generator and motor operation, magnetization characteristic, numericals.
UNIT – II
DC GENERATORS : Commutation and armature reaction, cross –
magnetizing and demagnetizing , mmf calculations . Separate and self
excitation of DC generators, critical field resistance and critical speed of DC
shunt generator.
UNIT – III
Characteristics of DC generators, Parallel Operation : Load characteristics
of separately excited, shunt, series and compound generators. Parallel
operation of DC separately excited generators, series generator as booster,
Numericals.
UNIT – IV
DC MOTORS : Significance of back EMF, Speed torque charateristics of DC
shunt, series and compound motors. Speed control by field & armature
voltage control, Starting of DC motors, 3- point starter and 4- point starter,
starting resistance calculations, numericals.
UNIT - V
TESTING OF DC MACHINES : Losses in a DC machine, condition for
maximum efficiency. Swinburne’s test, Hopkinson test, retardation test,
separation of losses,fields test. Brake test on motors, Load tests on
generators, numericals.
TEXT BOOKS:
1. “Electrical Machiness” by I.J. Nagrath and D.P Kothari, Tata mc Graw
Hill, 3rd edition 2004.
REFERENCE BOOKS:
1. “ Electrical machines” by P.S Bimbhra, Khanna Publishers.
2. A Electrical machinery by A.E Fitzgerald, C.Kingsley & S.Umans
Mc.Graw hill , 5th edition.
3. Electromechanical Energy conversion vicent Del toro.
4. Electric Drives Chillikin.
55
FLUID MECHANICS AND HYDRAULIC MACHINERY LAB

0 0/3/0 2
OBJECTIVES:
1. The purpose of this laboratory is to reinforce and enhance the under-
standing of fundamental principles, concepts and significance of
various experiments as per existing laboratory experimental practice
and evaluation procedure in the subject “Fluid mechanics and Fluid
machinery”.
The experiments here are so designed to demonstrate the applications
of the basic ûuid mechanics principles and to provide a more intuitive
and physical understanding of the theory.
LIST OF EXPERIMENTS:
1. Impact of Jets on Vanes
2. Performance Test on Pelton Wheel (Pelton Turbine).
3. Performance Test on Francis Turbine.
4. Performance Test on Kaplan Turbine.
5. Performance Test on Single Stage Centrifugal pump.
6. Performance Test on Multi Stage Centrifugal pump.
7. Calibration of Venturimeter.
8. Calibration of Orifice meter.
9. Determination of friction factor for a given pipe line.
10. Determination of loss of head due to sudden contraction in a pipeline.
56
ELECTRONIC DEVICES & CIRCUTIS LAB

0 0/3/0 2
OBJECTIVES: To give the students introduction about Discrete components
(linear and nonlinear), Breadboards, CRO’s, Multimeters, Signal generators
etc. and make them to identify the different components.Students are
trained to design different circuits using Diodes, BJT, FETS etc. for various
applications.
PART A: (Only for Viva-voce Examination)
ELECTRONIC WORKSHOP PRACTICE (in 3 lab sessions):
1. Identification, Specifications, Testing of R, L, C Components (Color Codes),
Potentiometers, switches (SPDT, DPDT, and DIP), Coils, Gang Condensers,
Relays, Bread Boards, PCB’s
2. Identification, Specifications and Testing of Active Devices, Diodes, BJT’s,
Low power JFET’s, MOSFET’s, Power Transistors, LED’s, LCD’s, SCR,UJT.
3. Study and operation of
➣ Multimeters (Analog and Digital)
➣ Function Generator
➣ Regulated Power Supplies
➣ CRO
PART B: (For Laboratory Examination - Minimum of 10 experiments)
1. Forward & Reverse Bias Characteristics of PN Junction Diode.
2. Zener diode characteristics and Zener as voltage Regulator.
3. Input & Output Characteristics of Transistor in CB Configuration.
4. Input & Output Characteristics of Transistor in CE Configuration.
5. Half Wave Rectifier with & without filters
6. Full Wave Rectifier with & without filters
7. FET characteristics
8. Measurement of h parameters of transistor in CB, CE, CC configurations
9. Frequency Response of CC Amplifier.
10. Frequency Response of CE Amplifier.
11. Frequency Response of Common Source FET amplifier
12. SCR characteristics.
13. UJT Characteristics
57
PART C:
Equipment required for Laboratories:
1. Regulated Power supplies (RPS) - 0-30V
2. CRO’s - 0-20MHZ
3. Function Generators - 0-1 MHz.
4. Multimeters5. Decade Resistance Boxes/Rheostats
6. Decade Capacitance Boxes
7. Ammeters (Analog or Digital) - 0-20uA,0-50uA,0-100uA,
0-200|iA, 0-10 mA.
8. Voltmeters (Analog or Digital) - 0-50V,0-100V,0-250V
9. Electronic Components - Resistors, Capacitors, LCDs,
BJTs pnp & npn, SCRs, UJTs,
FETs, MOSFETs, diodes- Ge & Si
OUTCOMES : Students can identify different components and can operate
them properly and also can design different circuits using different
components and devices for various applications.
58
ENIVIRONMENTAL SCIENCE
II YEAR B.Tech EEE II-Sem. L T/P/D C
3 0/0/0 3
OBJECTIVES:
1. To fulfill the requirement of UGC as per the direction of Supreme Court
of India.
2. To create awareness & sensitize the young minds about the
environmental issues & their impacts on various environmental
components
3. To motivate the students about the conservation of resources and
protection of Environment from over exploitation.
4. To bring awareness regarding various Environmental Policy of India.
UNIT – I
ECO-SYSTEMS : Definition, Scope and Importance of ecosystem.
Classification, structure and function of an ecosystem, Food chains, food
webs and ecological pyramids. Flow of energy, Biogeochemical cycles,
Bioaccumulation, Biomagnification, ecosystem value, services and carrying
capacity, Field visits.
UNIT - II
ENVIRONMENTAL POLLUTION AND CONTROL TECHNOLOGIES:
Environmental Pollution & control: Classification of pollution, causes,
effects and control technologies. Air Pollution: Primary and secondary
pollutants, Automobile and Industrial pollution, Ambient air quality
standards. Water pollution: Sources and types of pollution, drinking water
quality standards. Soil Pollution: Sources and types, Impacts of modern
agriculture, degradation of soil. Noise Pollution: Sources and Health
hazards, standards, Pollution from Power projects, Solid waste: Municipal
Solid Waste management, composition and characteristics of e-Waste and
its management. Pollution control technologies: Wastewater Treatment
methods: Primary, secondary and Tertiary, Air: Overview of air pollution
control technologies, Concepts of bioremediation. Field visit. Global
Environmental Problems and Global Efforts: Climate change and impacts
on human environment. Ozone depletion and Ozone depleting substances
(ODS). Deforestation and desertification. International conventions /
Protocols: Earth summit, Kyoto protocol and Montréal Protocol.
UNIT – III
NATURAL RESOURCES: CLASSIFICATION OF RESOURCES: Living and Non-
Living resources, water resources: use and over utilization of surface and
ground water, floods and droughts, Dams: benefits and problems. Mineral
59
resources: use and exploitation, environmental effects of extracting and
using mineral resources, Land resources: Forest resources, Energy
resources: growing energy needs, renewable and non renewable energy
sources, use of alternate energy source, case studies..
UNIT - IV
BIODIVERSITY & BIOTIC RESOURCES : Introduction, Definition, genetic,
species and ecosystem diversity. Value of biodiversity; consumptive use,
productive use, social, ethical, aesthetic and optional values. India as a
mega diversity nation, Hot spots of biodiversity. Field visit. Threats to
biodiversity: habitat loss, poaching of wildlife, man-wildlife conflicts;
conservation of biodiversity: In-Situ and Ex-situ conservation. National
Biodiversity act
UNIT - V
ENVIRONMENTAL POLICY, LEGISLATION & EIA : Environmental Protection
act, Legal aspects Air Act- 1981, Water Act, Forest Act, Wild life Act,
Municipal solid waste management and handling rules, biomedical waste
management and handling rules, hazardous waste management and
handling rules. EIA: EIA structure, methods of baseline data acquisition.
Overview on Impacts of air, water, biological and Socio-economical aspects.
Strategies for risk assessment, Concepts of Environmental Management
Plan (EMP). Towards SUSTAINABLE FUTURE : Concept of Sustainable
Development, Population and its explosion, Crazy Consumerism,
Environmental Education, Urban Sprawl, Human health, Environmental
Ethics, Concept of Green Building, Ecological Foot Print, Life Cycle
assessment (LCA), Low carbon life style.
SUGGESTED TEXT BOOKS:
1. Text book of Environmental Science and Technology by M.Anji Reddy
2007, BS Publications.
2. Environmental studies by Erach Bharucha 2013, 2nd Ed. University
Grants Commission, University Press.
REFERENCE BOOKS:
1. Environmental Science: towards a sustainable future by Richard
T.Wright. 2008 PHL Learning Private Ltd. New Delhi.
2. Environmental Engineering and science by Gilbert M.Masters and
Wendell P. Ela .2008 PHI Learning Pvt. Ltd.
3. Environmental Science by Daniel B.Botkin & Edward A.Keller, Wiley
INDIA edition.
4. Environmental Studies by Anubha Kaushik, 4 th Edition, New age
international publishers.
60
POWER SYSTEMS-I
4 1/0/0 4
OBJECTIVE : Electrical Power plays significant role in day to day life of entire
mankind. This course concerns the generation and distribution of power
UNIT-I :
THERMAL & NUCLEAR POWER STATIONS : Thermal Power Stations(TPS):
Line diagram showing paths of coal, steam, water, air, ash and flue gasses.-
Brief description of TPS components: Economizers, Boilers, Super heaters,
Turbines, Condensers, Chimney and Cooling towers.
Nuclear Power Stations: Nuclear Fission and Chain reaction.- Nuclear fuels.-
Principle of operation of Nuclear reactor.-Reactor Components: Moderators,
Control rods, Reflectors and Coolants.- Radiation hazards: Shielding and
Safety precautions.- Types of Nuclear reactors and brief description of PWR,
BWR and FBR.
Gas Power Stations: Principle of Operation and Components ( Block Diagram
Approach Only)
UNIT-II
GENERAL ASPECTS OF DISTRIBUTION SYSTEMS, D.C & A.C. DISTRIBUTION
SYSTEMS : Classification of Distribution Systems, Comparison of DC & AC
distribution Systems, Under-Ground & Over Head Distribution Systems-
Requirements and Design features of Distribution Systems, Voltage Drop
Calculations in D.C Distributors Radial D.C Distributor and Ring Main
Distributor.
A.C. Distributors:Voltage Drop Calculations in A.C. Distributors – effect of
Power Factor, Numericals
UNIT-III:
SUBSTATIONS: Classification of substations: Air insulated substations(AIS)-
Indoor & Outdoor substations: Substations layout showing the location of
all the substation equipment. Bus bar arrangements in the Sub-Stations:
Simple arrangements like single bus bar, sectionalized single bus bar, main
and transfer bus bar system with relevant diagrams.
Gas insulated substations (GIS) – Advantages of Gas insulated substations,
different types of gas insulated substations, single line diagram of gas
insulated substations, bus bar, construction aspects of GIS, Installation and
maintenance of GIS, Comparison of Air insulated substations and Gas
insulated substations.
61
UNIT-IV:
POWER FACTOR AND VOLTAGE CONTROL : Causes of low p.f -Methods of
Improving p.f -Phase advancing and generation of reactive KVAR using static
Capacitors-Most economical p.f. for constant KW load and constant KVA
type loads.
Dependency of Voltage on Reactive Power flow.- Methods of Voltage
Control: Shunt Capacitors, Series Capacitors, Synchronous Capacitors, Tap
changing and Booster Transformers Numericals
UNIT-V
ECONOMIC ASPECTS OF GENERATION & TARIFFS : Load curve , load
duration and integrated load duration curves-load factor, demand factor,
diversity factor , capacity factor, utilization factor and plant use factor.
Base Load, Peak Load on Power station-Selection of Generating units ,
TARIFFS: Costs of Generation and their division into Fixed, Semi-fixed and
Running Costs, cost of depriciation . Desirable Characteristics of a Tariff
Method,Tariff Methods: Flat Rate, Block-Rate, two-part, three –part, and
power factor tariff methods and Numericals
TEXT BOOKS :
1. “Power System Engineering” by M.L.Soni, P.V.Gupta, U.S.Bhatnagar and
A.Chakraborti, DhanpatRai& Co. Pvt. Ltd., 1999.
2. Generation distribution …. By C.L.Wadhawa
3. Principles of Power Systems by V.K Mehta and Rohit Mehta S.CHAND&
COMPANY LTD., New Delhi 2004.
REFERENCE BOOKS :
1. Elements of Power Station design and practice by M.V. Deshpande,
Wheeler Publishing.
2. Electrical Power Systems by C.L.Wadhawa New age International (P)
Limited, Publishers 1997.
3. Electrical Power Generation, Transmission and Distribution by
S.N.Singh., PHI, 2003.
4. Gas turbine performance, by PP Wals, P.Fletcher, Blackwell Publisher,
2004.
62
ELECTRONIC CIRCUITS
3 1/0/0 3
COURSE OBJECTIVES:
1. To familiarize the student with the analysis and design of basic
transistor amplifier circuits
2. To apply the frequency response concepts to BJT and FETs
3. To understand the concepts of feedback and oscillator circuits
4. To familiarize the student with the analysis and design of clipper and
clamper circuits, wave shaping circuits and multivibrator circuits
UNIT - I
SINGLE STAGE AMPLIFIERS DESIGN AND ANALYSIS : Review of CE, CB, CC&
CS amplifiers-Classification of Amplifiers, Distortion in amplifiers-
Approximate analysis, CE, CB, CC amplifiers comparison.
BJT & FET FREQUENCY RESPONSE : Logarithms-Decibels-General frequency
consideration-Low frequency analysis-Low frequency response of BJT
amplifiers-Low frequency response of FET amplifier-Miller effect
capacitance-High frequency response of BJT amplifier-Square wave testing
UNIT - II
FEEDBACK AMPLIFIERS : Concept of feedback, Classification of feedback
amplifiers, General characteristics of negative feedback amplifiers, Effect
of Feedback on Amplifier characteristics-Voltage series-Voltage shunt,
Current series and Current shunt Feedback configurations-Simple problems.
OSCILLATORS : Conditions for oscillations, RC and LC type Oscillators, Crystal
oscillators, Frequency and amplitude stability of oscillators, Generalized
analysis of LC oscillators, Quartz, Hartley, and Colpitts Oscillators, RC-phase
shift and Wien-bridge oscillators.
UNIT - III
LARGE SIGNAL AMPLIFIERS : Class –A Power Amplifier, Maximum Value of
Efficiency of Class-A Amplifier, Transformer coupled amplifier- Push Pull
Amplifier-Complimentary Symmetry Circuits (Transformer Less Class B Power
Amplifier)-Phase Inverters, Transistor Power Dissipation, Thermal Runway,
Heat sinks.
LINEAR WAVESHAPING : High pass, low pass RC circuits, their response for
sinusoidal, step, pulse and square wave inputs.
UNIT - IV
CLIPPERS AND CLAMPERS : Diode clippers, Transistor clippers, clipping at
two independent levels, Transfer characteristics of clippers, Emitter coupled
63
clipper, Comparators, applications of voltage comparators, clamping
operation, clamping circuits using diode with different inputs, Clamping
circuit theorem, practical clamping circuits, effect of diode characteristics
on clamping voltage, Transfer characteristics of clampers.
SWITCHING CHARACTERISTICS OF DEVICES : Diode as a switch, piecewise
linear diode characteristics, Transistor as a switch, Break down voltage
consideration of transistor, Breakdown voltage with base not open, latching
in transistor, saturation parameters of Transistor and their variation with
temperature, Design of transistor switch, transistor-switching times.
UNIT - V
MULTIVIBRATORS : Multivibrators (using BJT’s): The Bistable multivibrator:
Fixed bias and self bias transistor binary stable state voltages and currents,
commutating capacitors, symmetrical and unsymmetrical triggering,
Analysis and design of Schmitt trigger circuit, monostable multivibrator
(collector coupled only), analysis and design of astable multivibretor
(collector coupled only) and applications of multivibrator.
TEXT BOOKS:
1. Electronic Devices and Circuit Theory, Robert L.Boylestad, Louis
Nasheisky, 9th Edition 2007, Pearson Education
2. Electronic Devices and Circuits by S. Salivahanan, N. Suresh Kumar
and A. Vallavaraj, 2nd edition 2008, Tata McGraw Hill Companies.
3. Solid State Pulse Circuits by David A. Bell, 4th Edition, Prentice Hall of
India
REFERENCE BOOKS:
1. Introductory Electronic Devices and Circuits (Conventional flow
version) – Robert T. Paynter, 7th Edition, 2009, PEI.
2. Electronic Devices and Circutits, Anil K. Maini, Varsha Agrawal, 1st
Edition, WILEY.
3. Pulse, Digital & Switching Waveforms by Jacob Milliman, Harbert Taub
and Mothiki S Prakash rao, 2nd edition 2008, Tata McGraw Hill
Companies.
64
SWITCHING THEORY AND LOGIC DESIGN (STLD)

(Common to ECE, EEE,ETM, ICE)
4 1/0/0 4
OBJECTIVES : To strengthen the students on Number systems and Codes,
Boolean algebra and Switching Functions, Karnaugh Map, Logic Gates,
Minimization of Switching Functions using Tabular Method, Combinational
logic design using conventional logic gates, Encoder, Decoder , Mux and
Demux ,Realization of Hazard free circuits, Programmable Logic devices
,Sequential circuits classification ,Flip flops, Finite state machines and
Algorithmic state machines.
UNIT - I
NUMBER SYSTEMS & CODES : Philosophy of number systems – complement
representation of negative numbers-binary arithmetic, complement method
of Subtraction -classification of binary codes-error detecting & error
correcting codes –hamming codes.
BOOLEAN ALGEBRA, SWITCHING FUNCTIONS : Fundamental postulates of
Boolean algebra, Basic theorems and properties, Algebraic simplification -
switching functions–Canonical and Minimal SOP and POS forms.
UNIT - II
MINIMIZATION OF SWITCHING FUNCTIONS : Karnaugh Map (K-Map)
method, Implicants, Prime implicants, Essential Prime implicants, don’t care
combinations- Tabular Method, Prime –Implicant chart, simplification rules.
COMBINATIONAL CIRCUITS-I : Digital logic gates, properties of XOR gates
–universal gates-Realization of logic gates using universal logic gates-
Realization of Multilevel NAND/NOR realizations-Design of Half Adder, Full
Adder ,Half Subtractor , Full Subtractor ,magnitude comparator, 4-bit
parallel adder, Carry look ahead adder using conventional logic gates.
UNIT - III
COMBINATIONAL CIRCUITS-II : Encoder, Decoder, Multiplexer, De-
Multiplexer, Modular design using IC chips, MUX Realization of switching
functions, Parity bit generator, Code-converters, Hazards and hazard free
realizations.
PROGRAMMABLE LOGIC DEVICES : Basic PLD’s-ROM, PROM, PLA, PAL, and
Realization of Switching functions using PLD’s.
UNIT - IV
SEQUENTIAL CIRCUITS - I : Combinational versus sequential circuits,
Classification of sequential circuits: Synchronous, Asynchronous, Pulse
mode, Level mode with examples. Basic flip-flops (SR, JK, T, D) -Triggering
65
and excitation tables of flip-flops, conversion among different flip-flops.
Steps in synchronous sequential circuit design. Classification of Counters
(Synchronous and Asynchronous counters), Design of modulo-N
synchronous binary, gray, BCD, excess-3, Shift register counters(Ring and
Johnson counters) Serial binary adder, sequence detector.
UNIT - V
SEQUENTIAL CIRCUITS - II : Finite state machine-capabilities and limitations,
Mealy and Moore models-minimization of completely specified and
incompletely specified sequential machines, Partition techniques and
Merger chart methods-concept of minimal cover table.
ALGOROTHIMIC STATE MACHINES: Salient features of the ASM chart-Simple
examples-System design using data path and control subsystems-control
implementations-examples of Weighing machine and Binary multiplier.
TEXTBOOKS:
1. Switching & Finite Automata theory – Zvi Kohavi, TMH, 2nd Edition.
2. Digital Design – Morris Mano, PHI, 3rd Edition, 2006.
3. Modern Digital Electronics –R.P Jain, TMH, 3rd Edition.
REFERENCES:
1. An Engineering Approach To Digital Design – Fletcher, PHI. Digital Logic
– Application and Design – John M. Yarbrough, Thomson.
2. Fundamentals of Logic Design – Charles H. Roth, Thomson Publications,
5th Edition, 2004.
3. Digital Logic Applications and Design – John M. Yarbrough, Thomson
Publications, 2006.
66
ELECTRICAL MACHINES – II
4 1/0/0 4
UNIT -I
SINGLE PHASE TRANSFORMERS : Single phase transformers-types -
constructional details-minimization of hystersis and eddy current losses-
emf equation - operation on no load and on load - phasor diagrams
Equivalent circuit - losses and efficiency-regulation. All day efficiency - effect
of variations of frequency & supply voltage on iron losses.
Auto transformers-equivalent circuit - comparison with two winding
transformers
UNIT –II
TESTING OF TRANSFORMERS : OC and SC tests – Sumpner’s test -
predetermination of efficiency and regulation-separation of losses test-
parallel operation with equal and unequal voltage ratios.
UNIT - III
THREE PHASE TRANSFORMER : Three phase transformers – Star – Delta
connections -open Ä connection , voltage harmonics in three winding
transformers, determination of Zp, Zs and Zt, off load and on load tap
changing; Scott connection.
UNIT -IV
THREE PHASE INDUCTION MOTORS : Three phase induction motors-
construction details of cage and wound rotor machines-production of
rotating magnetic field - principle of operation - rotor emf and rotor
frequency - rotor reactance, rotor current and pf at standstill and during
operation.
CHARACTERISTICS OF INDUCTION MOTORS : Rotor power input, rotor
copper loss and mechanical power developed and their inter relation-torque
equation-expressions for maximum torque and starting torque - torque
slip characteristic - double cage and deep bar rotors - equivalent circuit -
phasor diagram - crawling and cogging
UNIT - V
SPEED CONTROL OF INDUCTION MOTORS : Circle diagram-no load and
blocked rotor tests-predetermination of performance-methods of starting
and starting current and torque calculations
Speed control-change of frequency; change of poles and methods of
consequent poles; cascade connection. injection of an emf into rotor circuit
(qualitative treatment only)-induction generator-principle of operation.
67
TEXT BOOKS:
1. Electrical machines-PS Bhimbra, Khanna Publishers
2. Electric machinery - A.E. Fitzgerald, C.Kingsley and S.Umans, Mc Graw
Hill Companies, 5th edition
REFERENCE BOOKS:
1. Performance and Design of AC Machines by MG.Say, BPB Publishers.
2. Theory of Alternating Current Machinery- by Langsdorf, Tata McGraw-
Hill Companies, 2nd edition.
3. Electric Machines by I.J.Nagrath & D.P.Kothari,Tata Mc Graw Hill, 7th
Edition.2005
68
ELECTROMAGNETIC FIELDS
3 1/0/0 3
UNIT – I
ELECTROSTATICS : Rectangular, Cylindrical and spherical coordinate systems,
Coulomb’s law, electric field , determination of electrical field intensity due to
point charges, Finite and infinite line charges, surface charge, volume charge
with uniform charge density. Guass’s law in integral and differential form in
terms of ‘E’ , Electrical field due to infinite line , infinite plane and spherical
surface of uniform charge distribution, commentson use of guass’s law on find
‘E’. curl of E, electrical potential difference and potential, calculation of electric
potential due to different charge distributions. Energy of point and continous
charge distributions, energy density in static electric fields.
UNIT –II
CONDUCTORS AND DIELECTRICS : Properties of conductors in static electric
fields, induced charges, capacitance, capacitance of a parallel plate capacitor.
Poissons and Laplace equation, solution of Laplace equations in one
dimension,capacitance of a co-axial cable, method of images. Electrical dipoles,
torque on a dipole situated in an external electric field. Atomic polarization ‘P’,
Field due to polarized dielectric, bound surface and volume charge densities,
the displacement vector ‘D’, Guass’s law in the presence of dielectrics, linear
dielectrics, relative permittivity, parallel plate capacitor with composite
dielectrics.
UNIT –III
MAGNETOSTATICS : Steady line, surface and volume currents, continuity
equation, Biot –savart’s law in terms of ‘B’ and superposition, determination
of ‘B’ due to stedy currents of the following types: i) Finite and infinite straight
line, polyon, circle, solenoid. Divergence and curl of ‘B’. Ampere’s law in point
form, strokes theorem and integral form in terms of ‘B’, determination of ‘B’
for steady currents of following types: infinite line, infinite plane, and infinite
solenoid.Vector magnetic potential ‘A’, Magnetic field from vector magnetic
potential . Energy stored and enrgy density in a steady magnetic field. Lorentz’s
force law, force on steady currents of the following types: i) Long straight
conductor in an external magnetic field . ii) two long, straight, parallel
conductors.
UNIT- IV
MAGNETIC MATERIALS : Magnetics dipole, magnetic dipole moment, torque
on a square current loop in a uniform external magnetic field. Diamagents,
paramagentics, ferromagnetic ‘M’, bound suface and volume currens, the
69
vector’H’, Ampere’s law in the presence of magnetic materials, linear magnetic
materials , relative permeablilty.
UNIT –V
TIME VARYING FIELDS ,MAXWELL’S EQUATIONS AND PALNE WAVE
PROPOGATION : Faraday’s law, lenz’s law, statically and dynamically in duced
emfs, Ohm’s law; self inductance of a solenoid, mutual inductance, example
of a long straight wire and square loop of wire in the same plane. Modification
of Maxwell’s equations for time varying fields , displacement current,
differentical and integral form. Plane wave propogation in free space.
TEXT BOOKS :
Engineering Electromagnetics : W.H. Hayt & John. A. Buck
REFERENCE BOOKS :
“Introduction of Electro dynamics” D.J. Griffits.
70
ELECTRICAL MACHINES LAB - I

0 0/3/0 2
The following experiments are required to be conducted compulsory
experiments
1. Magnetization characteristics of DC machine.
2. Load test on DC shunt generator.
3. Load test on DC series generator.
4. Load test on DC compound generator.
5. Hopkinson’s test on DC shunt machines.
6. Fields test on DC series machines.
7. Swinburne’s test and speed control of DC shunt motor.
8. Brake test on DC compound motor.
In additional to the above eight Experiments, any two of the
experiments from the following list are required to be conducted:
9. Brake test on DC shunt motor.
10. Retardation test on DC shunt motor.
11. Separation of losses in DC shunt motor.
71
ELECTRICAL MEASUREMENTS LAB

0 0/3/0 2
The following experiments are required to be conducted as compulsory
experiments:
1. Calibration and Testing of single phase energy Meter
2. Calibration of dynamometer power factor meter
3. Crompton D.C. Potentiometer - Calibration of PMMC ammeter and PMMC
voltmeter
4. Kelvin’s double Bridge - Measurement of resistance – Determination of
Tolerance.
5. Dielectric oil testing using H.T. testing Kit
6. Schering bridge & Anderson bridge.
7. Measurement of 3 phase reactive power with single-phase wattmeter.
8. Measurement of parameters of a choke coil using 3 voltmeter and 3
ammeter methods.
In addition to the above eight experiments, atleast any two of the
experiments from the following list are required to be conducted:
9. Calibration LPF wattmeter - by Phantom testing
10. Measurement of 3 phase power with single watt meter and 2 No’s of
C.T.
11. C.T. testing using mutual Inductor - Measurement of % ratio error
and phase angle of given C.T. by Null method.
12. P.T. testing by comparison - V.G as Null detector - Measurement of % ratio
error and phase angle of the given P.T.
13. LVDT and capacitance pickup - characteristics and Calibration
14. Resistance strain gauge - strain measurements and Calibration
15. Transformer turns ratio measurement using A.C. bridge
16. Measurement of % ratio error and phase angle of given C.T. by
comparison.
72
MANGERAL ECONOMICS & FINANCIAL ANALYSIS

III YEAR B.Tech EEE I-Sem. L T/P/D C
3 0/0/0 3
OBJECTIVES : To explain the basic principles of managerial economics,
accounting and current business environment underlying business decision
making.
UNIT - I
INTRODUCTION TO BUSINESS & MANAGERIAL ECONOMICS : Characteristic
features of Business, Features and evaluation of Sole proprietorship,
Partnership, Joint Stock Company, Public Enterprises and their types.
Definition, Nature and Scope of Managerial Economics, Features &
Relationship with other sciences – Managerial Economics Concepts –
Demand Analysis: Demand Determinants, Law of Demand and its
exceptions.
Definition, Types, Measurement and Significance of Elasticity of Demand.
Demand forecasting, Factors governing demand forecasting, methods of
demand forecasting (survey methods, statistical methods, expert opinion
method, test marketing controlled experiments, judgmental approach to
demand forecasting), Demand Forecasting for new Products.
UNIT - II
THEORY OF PRODUCTION : Production Function – Law of diminishing
returns, Isoquants and Isocosts, MRTS, Least Cost Combination of Inputs,
Cobb-Douglas Production function, Laws of Returns, Internal and External
Economies of Scale.
COST ANALYSIS : Cost Concepts, Opportunity cost, Fixed vs. Variable costs,
Explicit costs Vs.Implicit Costs, Out of pocket costs vs. Imputed costs. Cost
analysis in Short-run & Long-run. Break-even Analysis (BEA) – Determination
of Break-Even points (Simple problems) – Managerial Significance and
limitations of BEA.
UNIT - III
INTRODUCTION TO MARKET PRICING METHODS : MARKET STRUCTURES:
Types of competition, Features of Markets based on competition, Price-
Output determination in case of perfect competition and monopolistic
competition.
OBJECTIVES AND POLICIES OF PRICING - METHODS OF PRICING: Cost plus
Pricing, Marginal Cost Pricing, Sealed Bid Pricing, Going Rate Pricing, Limit
Pricing, Market Skimming Pricing, Penetration Pricing, Two-Part Pricing,
Block Pricing, Bundling Pricing, Peak Load Pricing, Cross Subsidization.
73
UNIT - IV
FINANCIAL ACCOUNTING & ANALYSIS : Accounting – Definition, Accounting
Concepts & Conventions, Importance of Accountancy, Difference between
Book-keeping & Accountancy, Double-Entry Book Keeping - Advantages,
Types of Accounts and its rules, Accounting Cycle - Journal, Ledger, Trial
Balance .
FINAL ACCOUNTS : Introduction to Final Accounts (Trading, Profit & Loss
Account and Balance Sheet) Adjustments with Simple Problems.
Introduction to Ratio Analysis, Need & Importance of Ratios (Theory only)
UNIT - V
CAPITAL AND CAPITAL BUDGETING : Introduction to Sources of raising
finance Nature and scope of capital budgeting, features of capital budgeting
proposals, Methods of capital Budgeting, Payback Method, Accounting Rate
of Return (ARR) and Net Present Value NPV , Profitability Index(PI), Internal
Rate of Return (IRR),(Simple Problems)
TEXT BOOKS:
1. Managerial Economics and Financial Analysis – A R Aryasri
REFERENCES:
1. Managerial Economics Analysis, Problems & Cases – P.L.Mehta.
2. Managerial Economics – Varshney & Maheshwari
3. Financial Management Text and problems – Khan & Jain
4. Financial Management – I.M.Pandey
5. Double Entry Book Keeping – T.S. Grewal
6. Managerial Economics & Financial Analysis – S.A Siddiqui & A.S Siddiqui
7. Managerial Economics & Financial Analysis – Raghunatha Reddy &
Narasimhachary
8. Financial Accounting – S.N. Maheswari & S.K Maheswari
74
POWER SYSTEMS - II
3 1/0/0 3
OBJECTIVE : Power Systems- II course is one of the core course of Electrical
discipline. In this course different types of transmission line parameters,
performance of short ,medium & Long transmission lines, and power system
transients , over heads line insulators and underground cables will be
studied.
UNIT-I
TRANSMISSION LINE PARAMETERS : Types of conductors - calculation of
resistance for solid conductors - Calculation of inductance for single phase
and three phase, single and double circuit lines, concept of GMR & GMD,
symmetrical and asymmetrical conductor configuration with and without
transposition, Numerical Numericals.
Calculation of capacitance for 2 wire and 3 wire systems, effect of ground
on capacitance, capacitance calculations for symmetrical and asymmetrical
single and three phase, single and double circuit lines, Numerical
Numericals.
UNIT-II
PERFORMANCE OF SHORT, MEDIUM AND LONG TRANSMISSION LINES :
Classification of Transmission Lines - Short, medium and long line and their
model representations -Rigorous Solution - Nominal-T, Nominal-Pie and A,
B, C, D Constants for symmetrical & Asymmetrical Networks. Interpretation
of the Long Line Equations, Representation of Long Lines Equivalent-T and
Equivalent Pie network models.
Mathematical Solutions to estimate regulation and efficiency of all types
of lines - Numericals.
UNIT-III
UNDERGROUND CABLES : Types of Cables, Construction, Types of Insulating
materials, Calculations of Insulation resistance and stress in insulation
Capacitance of Single and 3-Core belted cables. Grading of Cables -
Capacitance grading, Description of Inter-sheath grading. HV cables,
Numericals.
UNIT – IV
OVER VOLTAGES AND VOLTAGE CONTROL : Over voltages in transmission
lines - Travelling or Propagation of Surges - Attenuation, Distortion,
Reflection and Refraction Coefficients - Termination of lines with different
types of conditions - Open Circuited Line, Short Circuited Line, T-Junction,
Lumped Reactive Junctions. Bewley’s Lattice Diagrams.
75
Skin and Proximity effects - Description and effect on Resistance of Solid
Conductors - Ferranti effect - Charging Current - Regulation of the
Transmission Line, voltage control of transmission lines.
UNIT-V
OVERHEAD LINE INSULATORS , SAG CALCULATIONS : Types of Insulators,
String efficiency and Methods for improvement, - voltage distribution,
calculation of string efficiency, Capacitance grading and Static Shielding .
Arcing horn and grading ring.
Corona - Description of the phenomenon, factors affecting corona, critical
voltages and power loss, Radio Interference, advantages and disadvantages
of corona, methods of reducing corona effects.
Sag calculations with equal and unequal heights of towers, Effect of Wind
and Ice on weight of Conductor, Numericals - Stringing chart and sag
template and its applications. Vibrations and dampers.
TEXT BOOKS:
1. Electrical power systems - by C.L.Wadhwa, New Age International (P)
Limited, Publishers,1998.
2. Power System Engineering by M.L.Soni, P.V.Gupta, U.S.Bhatnagar,
A.Chakrabarthy, Dhanpat Rai & Co Pvt. Ltd.
REFERENCE BOOKS:
1. Power system Analysis-by John J Grainger William D Stevenson, TMC
Companies,4th edition.
2. Principles of power systems -by V.K. Mehta & Rohit Mehta, S. Chand
and company Ltd publishers.
3. power System Analysis and Design by B.R.Gupta, Wheeler Publishing.
4. Power System Analysis by Hadi Saadat – TMH Edition.
5. Modern Power System Analysis by I.J.Nagarath and D.P.Kothari, Tata
McGraw Hill, 2nd Edition.
76
IC APPLICATIONS
(COMMON TO ECE, EEE, ETM, ICE)
3 1/0/0 3
OBJECTIVES : To strengthen the basic concepts in IC’s design and its
applications, to introduce basic building blocks of analog and digital
integrated circuits, to familiarize linear and non-linear applications of op-
amp, to study about functioning of IC 555 timer, PLL , ADC and DAC
converters and their applications and to introduce the analysis and design
of digital IC’s of 74 series which form core part of digital electronics.
UNIT -
INTEGRATED CIRCUITS : Classification, Chip Size and Circuit Complexity, Ideal
and Practical Op-Amp, Op-amp characteristics-DC and AC Characteristics. 741
Op-Amp and its Features, Modes of operation-inverting, non-inverting,
differential.
OP-AMP APPLICATIONS : Basic Applications of Op-Amp, Instrumentation
Amplifier. AC Amplifier, V to I and I to V Converters, Sample & Hold Circuits,
Differentiators and Integrators, Comparators, Schmitt Trigger,
Multivibrators, Introduction to Voltage Regulators, Features of 723 Regulator.
UNIT - II
ACTIVE FILTERS & OSCILLATORS : Introduction, First Order and Second Order
Low Pass, High Pass and Band Pass Filters, Active Band Reject and All Pass
Filters.
Principle of Operation and Types of Oscillators - RC, Wien Bridge and quadrature
type.Waveform Generators - Triangular, Saw Tooth. Square Wave.
TIMERS : Introduction to 555 Timer, Functional Diagram, Monostable and
Astable Operations and Applications, Schmitt Trigger.
UNIT - III
PHASE LOCKED LOOPS : PLL- Introduction, Block Schematic, Principles and
Description of Individual Blocks of 565, VCO.
D-A AND A-D CONVERTERS : Introduction, Basic DAC Techniques - Weighted
Resistor Type, R-2R Ladder Type, Inverted R-2R Type. Different types of ADCs –
Parallel Comparator Type, Counter Type, Successive Approximation Register
Type and Dual Slope Type. DAC and ADC specifications.
UNIT - IV
LOGIC FAMILIES : Classification of Integrated Circuits, Standard TTL NAND
Gate - Analysis & Characteristics, TTL Open Collector Outputs, Tristate TTL,
MOS & CMOS open drain and tristate outputs, Comparison of Various Logic
Families, IC interfacing- TTL driving CMOS & CMOS driving TTL.
77
UNIT - V
COMBINATIONAL CIRCUIT ICS : Use of TTL-74XX Series & CMOS 40XX Series
ICs, TTL ICs – Code Converters, Decoders, Demultiplexers, Encoders,
Priority Encoders, multiplexers & their applications, Priority Generators,
Arithmetic Circuit ICs-Parallel Binary Adder/ Subtractor Using 2’s
Complement System, Magnitude Comparator Circuits.
SEQUENTIAL CIRCUIT ICS : Commonly Available 74XX & CMOS 40XX Series
ICs - RS, JK, JK Master-Slave, D and T Type Flip-Flops & their Conversions,
Synchronous and Asynchronous counters, Decade counters, Shift
Registers & applications.
TEXT BOOKS:
1. Linear Integrated Circuits -D. Roy Chowdhary, New Age International
(p)Ltd, 3rdEd.,2008.
2. Digital Fundamentals - Floyd and Jain, Pearson Education,8th Edition, 2005.
3. Op-Amps and Linear Integrated Circuits - Concepts and Applications
by James M.Fiore, Cengage / Jaico, 2/e, 2009.
REFERENCES:
1. Modern Digital Electronics - RP Jain- 4/e-TMH, 2010.
2. Op-Amps & Linear ICs-Ramakanth A. Gayakwad, PHI, 1987.
3. Operational Amplifiers and Liner Integrated Circuits by K.Lai Kishore -
Pearson, 2008.
4. Operational Amplifiers with Linear Integrated Circuits, 4/e William
D.stanley, Pearson Education India, 2009.
78
POWER ELECTRONICS
4 1/0/0 4
OBJECTIVE : With the advent of semiconductor devices, revolution is taking
place in the power transmission distribution and utilization. This course
introduces the basic concepts of power semiconductor devices, converters
and choppers and their analysis.
UNIT – I
POWER SEMI CONDUCTOR DEVICES : Thyristors – Silicon Controlled
Rectifiers (SCR’s) – BJT – Power MOSFET – Power IGBT and their V-I
characteristics, Turn on methods of SCR- Dynamic characteristics of SCR -
Turn on and Turn off times -IGCT and GTO static V-I charecteristics.
Gate Triggering Circuits– Series and parallel connections of SCR’s – Snubber
circuit details – Line Commutation and Forced Commutation circuits -
numericals
UNIT – II
SINGLE PHASE CONTROLLED CONVERTERS : Classification of single Phase
Converters- half and full wave converters – Mid point and Bridge
connections – Half controlled converters with R, RL and RLE loads–
Derivation of average load voltage and current -Active and Reactive power
inputs to the converters without and with Freewheeling Diode –Three phase
converters – Three pulse and six pulse converters –three phase half
controlled converters- average load voltage and current equations With R
and RL loads – Effect of Source inductance–Dual converters (both single
phase and three phase) - Waveforms –Numericals.
UNIT – III
AC VOLTAGE CONTROLLERS & CYCLO CONVERTERS : AC voltage controllers
– Single phase two SCR’s in anti parallel – With R and RL loads – modes of
operation of Triac – Triac with R and RL loads – Derivation of RMS load
voltage, current and power factor -wave forms – Cyclo converters – Single
phase midpoint cyclo converters with Resistive and inductive loads– Bridge
configuration of single phase cyclo converter – Waveforms - numericals
UNIT – IV
CHOPPERS : Choppers – Time ratio control and Current limit control
strategies – Step down choppers Derivation of load voltage and currents
with R, RL and RLE loads- Step up Chopper – load voltage expression –
types of choppers-first quadrant-second quadrant-four quadrant choppers
–voltage and current commutated choppers- Numericals.
79
UNIT – V
INVERTERS : Inverters – Single phase inverter – Basic series inverter – Basic
parallel Capacitor inverter bridge inverter – Waveforms –Basic three phase
bridge inverter-Operation with 180 0 conduction mode and 120 0 conduction
mode-Voltage control techniques for inverters -Pulse width modulation
techniques –single pulse width, multiple pulse width and sinusoidal pulse
width modulation , voltage sources inverters(VSI)- numericals.
TEXT BOOKS :
1. Power Electronics- by Dr.P.S.Bimbra,Khanna publishers
2. Power Electronics : Circuits, Devices and Applications – by M. H. Rashid,
Prentice Hall of India, 2nd edition, 1998
REFERENCE BOOKS :
1. Power electronics by Ned Mohan ….
2. Power Electronics – by M. D. Singh & K. B. Kanchandhani, Tata Mc
Graw – Hill Publishing company, 1998.
3. Power Electronics – by Vedam Subramanyam, New Age International
(P) Limited,
4. Power Electronics - by V.R.Murthy , 1st edition -2005, OXFORD University
Press
5. Power Electronics-by P.C.Sen,Tata Mc Graw-Hill Publishing.
6. Thyristorised Power Controllers – by G. K. Dubey, S. R. Doradra, A.
Joshi and R. M. K. Sinha, New Age International (P) Limited Publishers,
1996.
80
COMPUTER METHODS IN POWER SYSTEMS

4 1/0/0 4
OBJECTIVE : This course introduces formation of Y bus & Z bus of power
systems and power flow studies by various methods. It also deals with short
circuit analysis and analysis of power system for steady state and transient
stability.
UNIT -I
PRELIMINARIES & FORMATION OF NETWORK MATRICES : Per-Unit System
of Representation: Per-Unit equivalent reactance network of three phase
power systems.
GRAPH THEORY & FORMATION OF Y BUS: Definitions, Primitive Matrices,
Bus Incidence Matrix.
Y bus formation by Direct and Singular Transformation Methods.
Formation of ZbuS: Partial network, Algorithm for addition of a branch,
Algorithm for addition of a link, Modification of ZBus for the changes in
network. Numericals.
UNIT-II
POWER FLOW STUDIES-1 : Necessity of Power Flow Studies, Data for Power
Flow Studies, Derivation of load flow equations.
LOAD FLOW SOLUTIONS USING GAUSS SEIDEL METHOD: Load flow solution
with and without PV buses. Algorithm and Flowchart, Acceleration Factor,
Numerical Load flow Solution for Simple Power Systems, Calculation of Line
Flows & Losses.
UNIT-III
POWER FLOW STUDIES-2 : NEWTON RAPHSON METHOD IN RECTANGULAR
AND POLAR CO-ORDINATES FORMS: Load Flow Solution with or without
PV Buses- Derivation of Jacobian Elements, Algorithm and Flowchart.
Decoupled and Fast Decoupled Load Flow Methods
Comparison of different methods - DC load Flow.
UNIT-IV
SHORT CIRCUIT ANALYSIS : SYMMETRICAL FAULT ANALYSIS : Short Circuit
Current and MVA Calculations, Fault levels, Application of Series Reactors,
Numerical Numericals.
UNSYMMETRICAL FAULT ANALYSIS : Symmetrical Component Theory:
Symmetrical Component Transformation, Positive, Negative and Zero
sequence components: Voltages, Currents and Impedances.
81
Sequence Networks; Positive, Negative and Zero sequence Networks,
Numerical Numericals.
LG, LL, LLG faults with and without fault impedance. Numerical numericals.
UNIT-V
POWER SYSTEM STABILITY : Elementary concepts of steady State, dynamic
and transient Stabilities.
STEADY STATE STABILITY: Description of Steady State Stability Power Limit,
Transfer Reactance, Synchronizing Power Coefficient, Power Angle Curve
and Determination of Steady State Stability Limits, Methods to improve
steady state stability.
TRANSIENT STABILITY: Derivation of swing equation. Determination of
transient stability by equal area criterion, Application of equal area criterion,
Critical clearing angle calculations. Solution of swing equations: Point-by-
Point Method. Methods to improve transient stability.
TEXTBOOKS:
1. Computer Methods in Power System Analysis, G.W. Stagg & A.H. El-
Abiad, Mc Graw Hill
2. Power System Analysis by Hadi Saadat - TMH Edition.
3. Modern Power system Analysis - by I.J.Nagrath & D.P.Kothari: Tata
McGraw-Hill, 2nd edition.
REFERENCE BOOKS:
1. Computer Techniques in Power System Analysis by M.A.Pai, TMH
Publications
2. Power System Analysis by Grainger and Stevenson, Tata McGraw Hill.
3. Computer techniques and models in power systems, By K.Uma rao,
I.K.Inter national
4. Power system Analysis Operation and control, Abhijit Chakrabarthi,
Sunita Haldar, 3 ed, PHI,2010
5. Electric Power Systems, B.M. Weedy & B.J. Cory, 4th Edition, John
Wiley,1999.
82
ELECTRICAL MACHINES -III

4 1/0/0 4
OBJECTIVE : Electrical machines - III course is a core of Electrical discipline.
In this emphasis will be on construction , principle of operation,
characteristics , regulation, parallel operation of synchronous generator,
principle of operation and starting of synchronous motor, single phase
motors and special motors will be studied.
UNIT - I
SYNCHRONOUS GENERATORS : Constructional Features of round rotor and
salient pole machines – Armature windings –Integral slot and fractional
slot windings; Distributed and concentrated windings – distribution, pitch
and winding factors – E.M.F Equation.
Harmonics in generated e.m.f. – suppression of harmonics – armature
reaction - leakage reactance – synchronous reactance and impedance –
experimental determination - phasor diagram – load characteristics.
UNIT - II
REGULATION OF SYNCHRONOUS GENERATOR : Regulation by synchronous
impedance method, M.M.F. method, Z.P.F. method and A.S.A. methods –
salient pole alternators – two reaction analysis – experimental
determination of Xd and Xq (Slip test) Phasor diagrams – Regulation of salient
pole alternators.
UNIT - III
PARALLEL OPERATION OF SYNCHRONOUS GENERATORS : Synchronizing
alternators with infinite bus bars – synchronizing power torque – parallel
operation and load sharing - Effect of change of excitation and mechanical
power input. Analysis of short circuit current wave form – determination
of sub-transient, transient and steady state reactances.
UNIT - IV
SYNCHRONOUS MOTORS : Theory of operation– phasor diagram – Variation
of current and power factor with excitation –synchronous condenser –
Mathematical analysis for power developed .
Excitation and power circles – hunting and its suppression – Methods of
starting – synchronous induction motor.
UNIT - V
SINGLE PHASE MOTORS : Single phase Motors: Single phase induction
motor – Constructional features-Double revolving field theory – Elementary
idea of cross-field theory – split-phase motors – shaded pole motor.
83
SPECIAL MOTORS : Principle & performance of A.C. Series motor-Universal
motor – Principle of permanent magnet and reluctance motors, stepper
motors(elementary treatment only) .
TEXT BOOKS:
1. Electrical Machines – by I.J.Nagrath & D.P.Kothari, Tata Mc Graw-Hill
Publishers, 7th Edition 2005.
2. Electrical Machines – by P.S. Bimbra, Khanna Publishers.
REFERENCE BOOKS:
1. The Performance and Design of A.C.Machines – by M.G.Say, ELBS and
Ptiman & Sons.
Electric Machinery – by A.E. Fitzgerald, C.Kingsley and S.Umans, Mc
Graw-Hill Companies, 5th edition, 1990
2. Theory of Alternating Current Machinery by Langsdorf, Tata Mc Graw
- Hill, 2nd edition
3. Electro mechanic’s-III (Synchronous and single phase machines),
S.Kamakashiah, Right Publishers.
84
ADVANCED ENGLISH COMMUNICATIONS LAB

0 0/3/0 2
The Advanced English Communication Skills lab focuses on the career
planning, professional skills and interpersonal communication skills in the
globalised context.
OBJECTIVES : To improve the students’ fluency in English, through well-
developed vocabulary and enable them to listen to English spoken at normal
conversational speed by educated English speakers and respond
appropriately in different socio-cultural and professional contexts and to
enable the professional students to communicate their ideas relevantly and
coherently both in writing and speaking.
SYLLABUS
The following course content is prescribed for the Advanced English
Communication Skills Lab sessions:
1. Functional English – starting a conversation – responding appropriately
and relevantly – using the right body language – role play in different
situations.
2. Vocabulary Building – synonyms and antonyms, word roots, one-word
substitutes, prefixes and suffixes, study of word origin, analogy, idioms
and phrases.
3. Listening Skills – Purpose of listening – Types of listening – Barriers to
listening – Sub Skills of listening – Tips for being a good listener
4. Reading Comprehension – reading for facts, guessing meanings from
context, scanning, skimming, inferring meaning, critical reading.
5. Writing Skills – structure and presentation of different types of writing
– Resume writing/e-correspondence/ Technical report writing/
Portfolio writing/Mind-mapping - planning for writing – research
abilities/data collection/ organizing data/tools/analysis – improving
one’s writing.
6. Group Discussion – dynamics of group discussion, intervention,
summarizing, modulation of voice, body language, relevance, fluency
and coherence.
7. Presentation Skills – Oral presentation (individual and group) through
JAM sessions/seminars and written presentations through posters/
projects/reports/PPTs/e-mails/mind maps/assignments etc.
8. Interview Skills – concept and process, pre-interview through tele and
video-conferencing.
MINIMUM REQUIREMENT
THE ADVANCED ENGLISH COMMUNICATION SKILLS LAB SHALL HAVE
INTEGRATED MULTIMEDIA RESOURCES: 20 Multimedia systems, with
85
movable chairs and audio-visual aids with a P.A System, a Multimedia
Projector, a digital stereo –audio & video system and camcorder.
SYSTEM REQUIREMENT (HARDWARE COMPONENT)
Computer network with Lan with minimum 30 multimedia systems with
the following specifications:
1. CPU Requirements
1. Duel Core Processor
2. Speed – 2.8 GHZ
3. RAM – 1 GB Minimum
4. Hard Disk – 80 GB Minimum
5. DVD ROM Drive
2. Headphones of High quality
Suggested Software
1. Oxford Advanced Learner’s Compass, 7th Edition.
2. DELTA’s key to the Next Generation TOEFL Test: Advanced Skill Practice.
3. English in Mind, Herbert Puchta and Jeff Stranks with Meredith Levy,
Cambridge University Press.
4. Job Hunting by Colm Downes with CD, Cambridge University Press
2008.
5. Business Vocabulary in Use – Elementary to Intermediate with CDs,
Cambridge University Press.
REFERENCES:
1. Soft Skills: Know Yourself and Know the World, Dr.K.Alex. S.Chand &
Company Ltd.
2. Group Discussion and Interview Skills with VCD, Priyadarshi Patnaik,
Foundation Books.
3. Communication Skills for Engineers and Scientists, Sangeeta Sharma
& Binod Mishra, PHI Learning Private Limited.
4. Critical Reasoning, Acedemic Writing and Presentation Skills, Marilyn
Anderson, Pramod K.Nayar and Madhucchanda Sen, Pearson
Publishers.
5. Soft skills : Know yourself and know the world by Dr. K. Alex, S. Chand
& Co., Ltd.
DISTRIBUTION AND WEIGHTAGE OF MARKS
Advanced English Language Laboratory Practical Paper:
1. The practical examinations for the English Language Laboratory shall
be conducted as per the norms stipulated for the core engineering
practical sessions.
2. For the Language lab sessions, there shall be a continuous evaluation
during the semester for 25 sessional marks and 50 year-end
Examination marks. Of the 25 marks, 15 marks shall be awarded for
day-to-day work and 10 marks to be awarded by conducting Internal
Lab Test(s). The year- end Examination shall be conducted by the
teacher concerned with an external examiner from the other
Universities or colleges.
86
ELECTRICAL MACHINES –II LAB

0 0/3/0 2
List of Experiments:
1. O.C. & S.C. Tests on Single phase Transformer
2. Sumpner’s test on a pair of single phase transformers
3. Scott connection of transformers
4. No-load & Blocked rotor tests on three phase Induction motor
5. Regulation of a three –phase alternator by synchronous impedance &
m.m.f. methods
6. V and Inverted V curves of a three—phase synchronous motor.
7. Equivalent Circuit of a single phase induction motor
8. Determination of Xd and Xq of a salient pole synchronous machine
In addition to above eight experiments, at least any two of the following
experiments are required to be conducted from the following list.
9. Parallel operation of single phase transformers.
10. Separation of core losses of single phase transformer.
11. Regulation of three phase alternator by Z.P.F and A.S.A methods
12. Efficiency of three- phase alternator
13. Heat run test on a bank of 3 Nos. of single phase Delta connected
transformers.
14. Measurement of sequence impedance of a three phase alternator.
87
MANGEMENT SCIENCE
III YEAR B.Tech EEE II-Sem. L T/P/D C
3 0/0/0 3
OBJECTIVES : To familiarize with the process of management and to provide
basic insights into select contemporary management practices.
UNIT - 1
INTRODUCTION TO MANAGEMENT : Introduction to Management:
Concepts of Management and organization – nature, importance and
Functions of Management, Taylor’s Scientific Management Theory. Fayol’s
Principles of Management, Maslow’s Theory of Human Needs, Douglas
McGregor’s Theory X and Theory Y, Herzberg’s Two-Factor Theory of
Motivation, Systems Approach to Management, Leadership Styles,
Corporate Social Responsibility.
UNIT - II
STRATEGY & ORGANISATION STRUCTURE : Strategic Management:
Mission, Goals, Objectives, Policy, Strategy, Programmes, Elements of
Corporate Planning Process, Environmental Scanning, SWOT Analysis.
Organisational Structures: Basic concepts related to Organisation –
Departmentation and Decentralisation, Types of Mechanistic and organic
structures of organisation (Line organization, Line and Staff organisation,
functional organization, Committee organisation, Matrix organisation,
Virtual Organisation, Cellular organisation, team structure, boundaryless
organisation, Inverted Pyramid structure, Lean and Flat organisation
structure) and their merits , demerits and suitability.
UNIT - III
HUMAN RESOURCE MANAGEMENT : Human Resources Management (
HRM): Concepts of HRM, HRD and Personnel Management and Industrial
Relations ( PMIR), HRM vs. PMIR, Basic functions of HR Manager: Manpower
planning, Recruitment, Selection, Training and Development, Employee
Engagement, Placement, Wage and Salary Administration, Promotion,
Transfer, Separation, Performance Appraisal, Grievance Handling and
Welfare Administration. Job Evaluation and Merit Rating.
UNIT - IV
OPERATIONS MANAGEMENT : Operations Management: Principles and
types of Plant Layout -Methods of production ( Job, batch and Mass
Production), Work Study – Basic procedure involved in Method Study and
work Measurement – Statistical Quality Control : X Chart, R chart, C chart,
P chart, ( Simple Problems).
88
Materials Management: Objectives, Need for Inventory control, EOQ, ABC
Analysis.
Project Management (PERT/CPM): Network Analysis, Programme Evaluation
and Review Technique (PERT), Critical Path Method (CPM) (Simple
Problems).
Marketing: Functions of Marketing, Marketing Mix and Marketing Strategies
based on Product Life Cycle, Channels of Distribution, Retailing & Branding.
UNIT - V
CONTEMPORARY MANAGEMENT PRACTICES : Contemporary Management
Practices: Basic Concepts of Just-in-time (JIT) System, Capability Maturity
Model (CMM) Levels, Value Chain Analysis, Enterprise Resource Planning
(ERP), Performance Management, Business Process Outsourcing (BPO),
Business Process Re-engineering, Supply Chain Management, Total Quality
Management, Six Sigma, CRM, Bench Marking & Balanced Score Card.
TEXT BOOKS:
1. Management Science – A R Aryasri
REFERENCES:
1. Management - Stoner, Freemen & Gilberth
2. Industrial Engineering & Management Science – T.R. Banga & Sharma
3. Marketing Management – Kotler Philip & Keller Kevin
4. Human Resource Management – K. Aswathappa
5. Principles of Management – Koontz, Weihrich & Aryasri
6. PERT / CPM – L.S. Srinath
7. Management – VSP Rao & Gangadhar Rao
8. Production and Operations Management – SN Chary
89
POWER SEMICONDUCTOR DRIVES

4 1/0/0 4
OBJECTIVE : This course is an extension of Power Electronics applications
to AC and DC drives. Control of DC motor drives with single phase and
three phase converters and choppers are given in detail. The control of AC
motor drives with variable frequency converters and variable voltage are
presented.
UNIT – I
DC DRIVES - I : Control of DC motors by Single & Three phase Converters
Introduction to Thyristor controlled Drives, Single Phase semi and Fully
controlled converters connected to d.c separately excited and d.c series
motors – continuous current operation – output voltage and current
waveforms – Speed and Torque expressions – Speed – Torque
Characteristics- Numericals on Converter fed d.c motors.
Three phase semi and fully controlled converters connected to d.c separately
excited and d.c series motors – output voltage and current waveforms –
Speed and Torque expressions – Speed – Torque characteristics –
Numericals.
UNIT – II
DC DRIVES -II : Four Quadrant operation of DC Drives-Introduction to Four
quadrant operation – Motoring operations, Electric Braking – Plugging,
Dynamic and Regenerative Braking operations. Four quadrant operation
of D.C motors by dual converters – Closed loop operation of DC motor (Block
Diagram Only)
Single quadrant, Two –quadrant and four quadrant chopper fed dc
separately excited and series excited motors – Continuous current operation
– Output voltage and current wave forms – Speed torque expressions –
speed torque characteristics – Numericals on Chopper fed d.c Motors –
Closed Loop operation ( Block Diagram Only)
UNIT – III
INDUCTION MOTOR DRIVES -I : Control of Induction Motor through Stator
voltage & frequency
Variable voltage characteristics-Control of Induction Motor by Ac Voltage
Controllers – Waveforms – speed torque characteristics.
Variable frequency characteristics-Variable frequency control of induction
motor by Voltage source and current source inverter and cycloconverters-
PWM control – Comparison of VSI and CSI operations – Speed torque
90
characteristics – numerical numericals on induction motor drives – Closed
loop operation of induction motor drives (Block Diagram Only)
UNIT –IV
INDUCTION MOTOR DRIVES -II : Control of Induction motor of Rotor side
Static rotor resistance control – Slip power recovery – Static Scherbius drive
– Static Kramer Drive – their performance and speed torque characteristics
– advantages applications – numerical
UNIT – V
SYNCHRONOUS MOTOR DRIVES : Separate control & self control of
synchronous motors – Operation of self controlled synchronous motors by
VSI and CSI cycloconverters. Load commutated CSI fed Synchronous Motor
– Operation – Waveforms – speed torque characteristics – Applications –
Advantages and Numerical Numericals – Closed Loop control operation of
synchronous motor drives (Block Diagram Only), variable frequency control,
Cycloconverter, PWM, VFI, CSI
TEXT BOOKS:
1. Fundamentals of Electric Drives – by G K Dubey Narosa Publications
2. Power Semiconductor Drives –Prof. P.V.Rao
REFERENCE BOOKS:
1. Power Electronics – MD Singh and K B Khanchandani, Tata – McGraw-
Hill Publishing company,1998
2. Modern Power Electronics and AC Drives by B.K.Bose, PHI.
3. Thyristor Control of Electric drives – Vedam Subramanyam Tata
McGraw Hill Publilcations.
4. A First course on Electrical Drives – S K Pillai New Age International(P)
Ltd. 2nd Editon.
5. Power Electronic Circuits, Devices and applications by M.H.Rashid, PHI
91
CONTROL SYSTEMS
4 1/0/0 4
OBJECTIVES:
1. To enable the students to learn the concepts of control systems.
2. To make the students to learn time and frequency domain analysis
and also basic concepts of state space analysis.
UNIT – I
INTRODUCTION : Concepts of Control Systems- Open Loop and closed
loop control systems and their differences- Different examples of control
systems- Classification of control systems, Feed-Back Characteristics, Effects
of feedback.
Mathematical models – Differential equations, Impulse Response and
transfer functions - Translational and Rotational mechanical systems
UNIT - II
TRANSFER FUNCTION REPRESENTATION : Transfer Function of DC Servo
motor - AC Servo motor- Synchro transmitter and Receiver, Block diagram
representation of systems considering electrical systems as examples -Block
diagram algebra – Representation by Signal flow graph - Reduction using
Mason’s gain formula.
UNIT - III
TIME RESPONSE ANALYSIS & STABILITY ANALYSIS : Standard test signals -
Time response of first order systems – Characteristic Equation of Feedback
control systems, Transient response of second order systems - Time domain
specifications – Steady state response - Steady state errors and error
constants – Effects of proportional derivative, proportional integral systems.
The concept of stability – Routh’s stability criterion – qualitative stability
and conditional stability – limitations of Routh’s stability. Root Locus
Technique: The Root locus concept - construction of root loci-effects of
adding poles and zeros to G(s)H(s) on the root loci.
UNIT – IV
FREQUENCY RESPONSE & STABILITY ANALYSIS : Introduction, Frequency
domain specifications-Bode diagrams-Determination of Frequency domain
specifications and transfer function from the Bode Diagram-Phase margin
and Gain margin-Stability Analysis from Bode Plots. Polar Plots, Nyquist
Plots- Stability Analysis.
COMPENSATION TECHNIQUES – Lag, Lead, Lead-Lag Controllers design in
frequency Domain, PID Controllers.
92
UNIT – V
STATE SPACE ANALYSIS OF CONTINUOUS SYSTEMS : Concepts of state,
state variables and state model, derivation of state models from block
diagrams, Diagonalization- Solving the Time invariant state Equations- State
Transition Matrix and it’s Properties – Concepts of Controllability and
Observability.
TEXT BOOKS:
1. Automatic Control Systems 8th edition– by B. C. Kuo 2003– John wiley
and son’s.
2. Control Systems Engineering – by I. J. Nagrath and M. Gopal, New Age
International (P) Limited, Publishers, 2nd edition.
REFERENCE BOOKS:
1. Modern Control Engineering – by Katsuhiko Ogata – Prentice Hall of
India Pvt. Ltd., 3rd edition, 1998.
2. Control Systems by N.K.Sinha, New Age International (P) Limited
Publishers, 3rd Edition, 1998.
3. Control Systems Engg. by NISE 3rd Edition – John wiley
4. “Modelling & Control Of Dynamic Systems” by Narciso F. Macia George
J. Thaler, Thomson Publishers..
93
MICROPROCESSORS & MICROCONTROLLERS

(Common to ECE, ETM, EEE, ICE)
4 1/0/0 4
OBJECTIVES : To provide the students the concepts of Intel 8086
microprocessors and their architectures. To enable the students to write
efficient programs in assembly level language of 8086 family of
microprocessors. To train the students on the techniques of interfacing
between the 8086 processor and peripheral devices, so that they can design
and develop a complete microprocessor-based system. To provide the
students the fundamentals of different serial communication standards.
To prepare students to learn hardware architecture of 8051 microcontroller
and to do programming on it. To provide the students an introduction to
RISC micro controllers.
UNIT -I
8086 ARCHITECTURE : An overview of 8085,8086 Architecture-Functional
diagram, Register Organization, Memory Segmentation, Programming
Model, Memory addresses, Physical memory organization, Signal
descriptions of 8086- common function signals, Minimum and Maximum
mode signals, Timing diagrams.
UNIT -II
INSTRUCTION SET AND ASSEMBLY LANGUAGE PROGRAMMING OF 8086 :
Instruction formats, addressing modes, instruction set, assembler directives,
macros, simple programs involving logical, branch and call instructions,
sorting, evaluating arithmetic expressions, string manipulations.
UNIT -III
I/O AND MEMORY INTERFACING : 8255 PPI, various modes of operation
and interfacing to 8086, interfacing keyboard, display, stepper motor
interfacing, D/A and A/D converter, Memory interfacing to 8086.
INTERRUPTS: Interrupt structure of 8086, Vector interrupt table, Interrupt
service routine, Introduction to DOS and BIOS interrupts, Interfacing
Interrupt Controller 8259, Interfacing of DMA Controller 8257.
COMMUNICATION INTERFACE : Serial communication standards, Serial data
transfer schemes, 8251 USART architecture and interfacing, Basics of RS-
232.
UNIT - IV
INTRODUCTION TO MICROCONTROLLERS : Overview of 8051
microcontroller, Architecture, I/O Ports, Memory organization, addressing
modes and instruction set of 8051, simple programs.
94
8051 REAL TIME CONTROL : Timer/Counter, programming 8051 timers and
counters; Interrupts, programming Timer Interrupts, programming external
hardware interrupts; Serial communication, programming the serial
communication interrupts.
UNIT - V
THE RISC MICROCONTROLLER ARCHITECTURE : Introduction to RISC
Microcontroller,SPI,I2C,TWI Serial Bus, Memory – Flash memory, EEPROM,
SRAM, USART, Basics of USB.
OUTCOMES : Students will be able to understand the principle of operation
of Intel 8086 microprocessor. Students will be able to write assembly
language programs on Intel 8086 including ascending order and descending
order of data, string operations. Students will be able to interface Intel
8086 processor with 8255, DMA controller, Intel 8259, USART to develop
the microprocessor based system. Students will develop and run program
of Intel 8051 microcontroller. Students will learn architecture and interrupt
structure of RISC microcontrollers.
TEXT BOOKS:
1. Advanced Microprocessors and Peripherals – A. K. Ray and K.M.
Bhurchandi, Tata-McGraw Hill, 2nd edition 2006.
2. D. V. Hall, Micro processors and Interfacing, Tata-McGraw Hill, 2nd
edition 2006.
3. Kenneth. J. Ayala, The 8051 microcontroller , 3rd edition, Cengage
learning, 2010.
4. Microprocessors and Microcontrollers, Lyla. B.Das, 1st edition, Pearson,
2012.
REFERENCES:
1. The 8051Microcontrollers, Architecture and programming and
Applications - K. Uma Rao, Andhe Pallavi, Pearson, 2009.
2. The 8051 Microcontroller and Embedded Systems Using Assembly and
C, Second Edition
3. Muhammad Ali Mazidi, Janice Gillispie Mazidi, Rolin D. McKinlay,
Prentice Hall.
4. Micro Computer System 8086/8088 Family Architecture, Programming
and Design - Liu and GA Gibson, Prentice-Hall India, 2nd Ed.,
5. Microcontrollers and application, Ajay. V. Deshmukh, Tata-McGraw Hill,
2005
6. The 8085 Microprocessor: Architecture, programming and Interfacing
– K. Uday Kumar, B.S. Umashankar, 2008, Pearson.
95
RENEWABLE ENERGY SOURCES

(OPEN ELECTIVE)
3 1/0/0 3
OBJECTIVE : This course introduces renewable energy sources which
includes solar, wind, Geo thermal , Bio Mass , Ocean.
UNIT - I
PRINCIPLES OF SOLAR RADIATION : Renewable energy – sources and
features - Role and potential - Distributed energy systems and dispersed
generation (DG) - The solar energy option, Environmental impact of solar
power.
Solar radiation spectrum - Extraterrestrial and terrestrial solar radiation -
Radiation measurement - Instruments for measuring solar radiation and
Sun shine, Solar radiation data, Solar constant, Solar radiation on tilted
surface, Solar radiation patterns in India.
UNIT - II
SOLAR ENERGY COLLECTION, STORAGE AND APPLICATIONS : Energy
Collection: Flat plate and Concentrating collectors, Their Orientation and
thermal analysis, Classification of Concentrating collectors, Advanced
collectors.
Energy Storage : Sensible heat, Latent heat, Stratified storage - Solar ponds.
Applications : Heating techniques, Cooling techniques, Solar Distillation and
Drying, Power Generation, Photovoltaic energy conversion – Operating
principle, Photovoltaic cell concepts, Cell, module, array, Series and parallel
connections, Potential of India in Solar energy utilization.
UNIT - III
WIND ENERGY AND BIOMASS : Wind energy: Power in Wind, Betz criteria,
Wind patterns and wind data, Site selection, Types of wind mills,
Characteristics of wind generators, Potential of India in Wind Energy
utilization.
Bio-mass: Principles of Bio-Conversion, Anaerobic, Aerobic digestion, Types
of Bio-gas digesters, Operating principle, Combustion and fermentation,
Wood gassifier, Pyrolysis, Applications - Bio gas, Wood stoves, Bio diesel,
I.C.Engine operation and Economic aspects.
UNIT - IV
GEOTHERMAL ENERGY AND OCEAN ENERGY : Geothermal energy:
Resources, Types of wells, Methods of harnessing the energy - Introduction
to Thermo dynamic Cycles- Rankine, Bray ton Cycles and their advantages
96
and limitations, Potential of India in Geothermal energy options.
Ocean energy: OTEC - Principle of utilization, Setting up of OTEC plants,
Thermodynamic cycles involved in OTEC. Tidal and wave energy - Potential
and conversion techniques, Mini-hydel power plants and their economics
in India.
UNIT - V
DIRECT ENERGY CONVERSION : Direct Energy Conversion (DEC), Need for
DEC, Types of DEC - Fuel Cells, Magneto Hydro Dynamic Energy Conversion
(MHD), Thermo Electric and Thermo Ionic Conversion (elementary
treatment only), Working Principle, Advantages and Disadvantages.
Combined cycle and Co-generation.
TEXT BOOKS:
1. Non-Conventional Energy Sources /G.D. Rai, Khanna Publishers
2. Renewable Energy Resources – Twidell & Wier, CRC Press( Taylor &
Francis)
REFERENCE BOOKS:
1. Renewable energy resources/ Tiwari and Ghosal/ Narosa.
2. Renewable Energy Technologies /Ramesh & Kumar /Narosa
3. Non-Conventional Energy Systems / K Mittal /Wheeler
4. Renewable energy sources and emerging technologies by
D.P.Kothari,K.C.Singhal, P.H.I.
5. Solar Energy : Principles of Thermal Collection and Storage/
Sukhatme.S.P/Tata MGHill.
97
INTELLECTUAL PROPERTY RIGHTS (OPEN ELECTIVE)
3 1/0/0 3
OBJECTIVE : Intellectual property rights are the legal rights given to persons
over the creations of their minds.They usually give the creator an exculsive
right over the use of his creation for certain period of time.
UNIT-I
INTRODUCTION TO INTELLECTUAL PROPERTY: Introduction, types of
intellectual property, international organizations, agencies and treaties,
importance of intellectual property rights.
TRADE MARKS: Purpose and function of trademarks, acquisition of trade
mark, rights, protectable matter, selecting and evaluating trade mark, trade
mark registration processes.
UNIT-II
LAW OF COPY RIGHTS : Fundamental of copy right law, originality of
material, rights of reproduction, rights to perform the work publicly, copy
right ownership issues, copy right registration, notice of copy right,
international copy right law.
LAW RELATING TO PATENTS: Overview-historical developments-concepts-
novelty-utility-inventiveness/Non-obviousness.
UNIT-III
Procedure for obtaining of patents - contents of patent application-
specification-disclosure aspects-claims-examination of application-
opposition of application-sealing of patents.
TRADE SECRETS: Trade secrete law, determination of trade secrete status,
Liability for misappropriations of trade secrets, protection for submission,
trade secrete litigation.
UNIT- IV
UNFAIR COMPETITION: Misappropriation right of publicity, False
advertising.
New development of intellectual property: new developments in trademark
law ; copy right law, patent law, intellectual property audits.
UNIT-V
International overview on intellectual property, international - trade mark
law, copy right law, and international patent law. international development
in trade secrets law.
REFERENCES & TEXT BOOKS :
1. Intellectual property right, Deborah. E. Bouchoux, cengage learing.
2. Intellectual property right - nleashmy the knowledge economy,
prabuddha ganguli, Tata Mc Graw Hill Publishing company ltd..
3. W.R.Cornish ,Intellectual property, Sweet & Maxwell, London(2000).
4. Brain c.Reid, A pratical guide to patent law,Second edition.1993.
98
NANOTECHNOLOGY (OPEN ELECTIVE)

3 1/0/0 3
UNIT-I
INTRODUCTION TO NANOTECHNOLOGY : Importance of nanoscale,
Nanostructure types, electronic, magnetic, optical Properties of
Nanomaterials, top-down and bottom- up approach to nanostructures.
Nanomaterials: Amorphous, crystalline, microcrystalline, quasi-crystalline
and nano-crystalline materials. Historical development of nanomaterials-
Issues in fabrication and characterization of nanomaterials.
UNIT-II
QUANTUM MECHANICAL PHENOMENON IN NANOSTRUCTURES:
Quantum confinement of electrons in semiconductor Nano structures, one
dimensional confinement (Quantum wires), two dimensional confinements
(Quantum Wells), three dimensional confinements (Quantum dots).
CARBON NANO STRUCTURES: Carbon nanotubes (CNTs), Fullerenes, C60,
C80 and C240 Nanostructures, Properties (mechanical, optical and
electrical) and applications.
UNIT-III
FABRICATION OF NANOMATERIALS :Physical Methods: Inert gas
condensation. Arc discharge, RFplasma. Plasma arc technique, Ion
sputtering, Laser ablation. Laser pyrolysis, Molecular beam epitaxy.
Chemical vapour deposition method.Nano scale characterization
techniques:Scanning probe techniques (AFM. MFM. STM, SEM, TEM), XRD.
UNIT-IV
NANODEVICES AND NANOMEDICINE : Lab on chip for bioanalysis. Core/
shell Nano particles in drug delivery systems (site specific and targeted drug
delivery), cancer treatment, and bone ! issue treatment.
NANO AND MOLECULAR ELECTRONICS: Resonant-Tunneling structures,
single electron tunneling, Single Electron transistors, coulomb blockade,
giant magneto resistance, tunneling magneto resistance.
UNIT-V
NANOLITHOGRAPHY AND NANO MANIPULATION : E-beam lithography
and SEM based nano lithography and nanomanipulation. Ion beam
lithography, oxidation and metallization. Mask and its application. Deep
UV lithography( X-ray based lithography. Applications of nanomaterials:
Applications in Mechanical, Electronics engineering industries - Use of
nanomaterials in automobiles, aerospace, defense and medical applications
99
Metallic, polymeric, organic and ceramic nanomaterials.
TEXT BOOKS:
1. Charles,p.pode. Introduction to nanotechnology, springer publications
2. Springer Handbook of Nanotechnology - Bharat Bhusan
3. Phani kumar, principles of nanotechnology, sciteeh publications
4. A.K. Bandyopadhyay, “ Nano Materials”, New Age International
Publishers, New Delhi, 2007
5. Bharat Bhushan, “Handbook of Nanotechnology”, Springer, Germany,
2004.
REFERENCES BOOKS:
1. David Ferry ‘Transport in Nano structures” Cambridge University press
2000 Z Nano biotechnology; ed. C.M.Niemeyer, C.A. Mirkin.
2. Nano fabrication towards biomedical application: Techniques,
tools,Application and impact- Ed. Challa S.,S. R. Kumar, J. H. Carola.
3. Encyclopedia of Nanotechnology- Hari Singh Nalwa
4. Carbon Nanotubes: Properties and Applications- Michael J. O’Connell.
5. S. Dutta “Electron Transport in Mesoscoptc systems” Cambridge
University press
6. H. Grabert and M. Devoret “Single charge Tunneling” Plenum press
1992
7. Mark Ratner and Daniel Ratner, “Nano Technology”, Pearson
Education, NewDelhi, 2003.
8. Gregory Timp, “Nanotechnology”, Springer, India, 2005
9. Ahmed Busnaina, “Nanomanufacturing Handbook”, CRC Press, London,
2006
100
OOPS THROUGH JAVA

3 1/0/0 3
COURSE OBJECTIVES:
➣ The objective of this course is to provide object oriented concepts
through which robust, secured and reusable software can be
developed.
➣ To understand object oriented principles like abstraction,
encapsulation, inheritance, polymorphism and also fundamentals
of object-oriented programming in Java, including objects, classes,
and interfaces.
➣ To provide the Knowledge in Packages, Exception handling,
Multithreading.
➣ To Explore AWT and Applets to create GUI applications.
➣ To give the students the ability to use the potential benefits of object-
oriented programming for solving complex problems efficiently.
UNIT - I
OBJECT ORIENTED THINKING : Need for oop paradigm, A way of viewing
world – Agents, responsibility, messages, methods, classes and instances,
class hierarchies (Inheritance), method binding, overriding and exceptions,
summary of oop concepts, coping with complexity, abstraction mechanisms.
JAVA BASICS : History of Java, Java buzzwords, data types, variables, scope
and life time of variables, arrays, operators, expressions, control statements,
type conversion and costing, simple java program, concepts of classes,
objects, constructors, methods, access control, this keyword, garbage
collection, overloading methods and constructors, parameter passing,
recursion, nested and inner classes, String handling
UNIT - II
INHERITANCE : Hierarchical abstractions, Base class object, subclass,
subtype, substitutability, forms of inheritance- specialization, specification,
construction, extension, limitation, combination, benefits of inheritance,
costs of inheritance. Member access rules, super uses, using final with
inheritance, polymorphism- method overriding, abstract classes, Object
class
PACKAGES AND INTERFACES : Defining, Creating and Accessing a Package,
Understanding CLASSPATH, importing packages, differences between classes
and interfaces, defining an interface, implementing interface, applying
interfaces, variables in interface and extending interfaces, package java.io
– File, Byte Streams, Character Streams, Stream I/O.
101
UNIT - III
EXCEPTION HANDLING : Concepts of exception handling, benefits of
exception handling, Termination or resumptive models, exception hierarchy,
usage of try, catch, throw, throws and finally, built in exceptions, creating
own exception sub classes. Package java.util- Collections Framework:
Collection Interface: Queue, Collection class:LinkedList,Stack class,
StringTokenizer, Date, Random, Scanner.
MULTI THREADING : Differences between multi threading and multitasking,
tread life cycle, creating threads, thread priorities, synchronizing threads,
inter thread communication, thread groups, daemon threads.
UNIT - IV
Enumerations, auto boxing Generics –A simple generics example.
EVENT HANDLING: Events, Event sources, Event classes, Event Listeners,
Delegation event model, handling mouse and keyboard events, Adapter
classes.
AWT : Class hierarchy, component, container, panel, window, frame, canvas,
graphics. Layout Manager – layout manager types – boarder, grid, flow,
card and grib bag.
UNIT - V
AWT CONTROLS : Labels, button, canvas, scrollbars, text components, check
box, check box groups, choices, lists panels – scrollpane, dialogs, menubar.
APPLETS : Concepts of Applets, differences between applets and
applications, life cycle of an applet, types of applets, creating applets,
passing parameters to applets.
SWING : Introduction, limitations of AWT, MVC architecture, components,
containers.
TEXT BOOKS:
1. Java- the complete reference, 7th editon, Herbert schildt, TMH.
2. Understanding OOP with Java, updated edition, T. Budd, pearson
eduction.
REFERENCES:
1. Thinking in Java 4th Edition, Bruce Eckel
2. Introduction to Java programming, Y. Daniel Liang, pearson education.
3. Core Java 2, Vol 1, Fundamentals, Cay.S.Horstmann and Gary Cornell,
eighth Edition, Pearson Education.
102
POWER ELECTRONICS LAB

0 0/3/0 2
The following experiments are required to be conducted compulsory
experiments
1. Study of Characteristics of SCR, MOSFET & IGBT
2. Gate firing circuits for SCR’s
3. Single Phase AC Voltage Controller with R and RL Loads
4. Single Phase fully controlled bridge converter with R and RL loads
5. Forced Commutation circuits ( Class A, Class B, Class C, Class D & Class
E)
6. Four quadrant chopper with R and RL Loads
7. Single Phase Half controlled converter with R load
8. Single Phase Cycloconverter with R and RL loads
Any two of the following experiments are required to be conducted
9. Three Phase half controlled bridge converter with R-load
10. Single Phase Parallel, inverter with R and RL loads
11. Single Phase series inverter with R and RL loads
12. Single Phase Bridge inverter with R and RL loads
13. Single Phase dual converter with RL load
103
MICROPROCESSORS AND MICROCONTROLLERS LAB

0 0/3/0 2
The following programs are to be written for assembler and execute the
same with 8086 and 8051 kits
1. Programs for 16 bit arithmetic operations for 8086 (using various
addressing modes)
2. Program for sorting an array for 8086.
3. Program for searching for a number or character in a string for 8086.
4. Program for string manipulations for 8086.
5. Program for digital clock design using 8086.
6. Interfacing ADC and DAC to 8086.
7. Parallel communication between two microprocessor kits using 8255.
8. Serial communication between two microprocessor kits using 8251.
9. Interfacing to 8086 and programming to control stepper motor.
10. Programming using arithmetic, logical and bit manipulation
instructions of 8051.
11. Program and verify timer/counter in 8051.
12. Program and verify interrupt handling in 8051.
13. UART operation in 8051.
14. Communication between 8051 kit and PC.
15. Interfacing LCD to 8051.
16. Interfacing Matrix/keyboard to 8051.
Note: Minimum of 10 experiments to be conducted.
104
SWITCH GEAR & PROTECTION

IV YEAR B.Tech EEE I-Sem L T/P/D C
4 1/0/0 4
OBJECTIVE : This course introduces all varieties of Circuit Breakers and
Relays for protection of Generators, Transformers and feeder bus bars from
over voltages and other hazards. It emphasis on Neutral grounding for
overall protection.
UNIT-I
CIRCUIT BREAKERS : Circuit Breakers: Elementary principles of arc
interruption, Recovery, Restriking Voltage and Recovery voltages.- Restriking
Phenomenon, Average and Max. RRRV,
Current Chopping and Resistance Switching - CB ratings and Specifications
: Types and. - Auto reclosures.
Description and Operation of types of circuit breakers: Minimum Oil Circuit
breakers, Air Blast Circuit Breakers, Vacuum and SF6 circuit breakers, Testing
of circuit breakers. Numericals
UNIT - II
ELECTROMAGNETIC AND STATIC RELAYS : Principle of Operation and
Construction of Attracted armature, Balanced Beam, induction Disc and
Induction Cup relays. Relays Classification: Instantaneous, IDMT andinverse
characterisitcs . Application of relays: Over current/ Under voltage relays,
Directional relays, Differential Relays and Percentage Differential Relays.
Universal torque equation, Distance relays: Impedance, Reactance and Mho
and Off-Set Mho relays, Characteristics of Distance Relays and Comparison.
Static Relays, comparators ,realization of various charaterisitcs using static
relays
UNIT - III
FEEDER AND BUS-BAR PROTECTION : Protection of Lines: Over Current,
Carrier Current and Three-zone distance relay protection using Impedance
relays. Translay Relay. Protection of Bus bars - Differential protection.
UNIT - IV
GENERATOR & TRANSFORMER PROTECTION : Protection of generators
against Stator faults, Rotor faults, and Abnormal Conditions. Restricted Earth
fault and Inter-turn fault Protection. Numericals on % Winding Unprotected.
Protection of transformers: Percentage Differential Protection, Numerical
Problem on Design of CT s Ratio, Buchholtz relay Protection.
105
UNIT - V
PROTECTION AGAINST OVER VOLTAGES & NEUTRAL GROUNDING :
Generation of Over Voltages in Power Systems.-Protection against Lightning
Over Voltages - Valve type and Zinc-Oxide Lighting Arresters - Insulation
Coordination -BIL, Impulse Ratio, Standard Impulse Test Wave, Volt-Time
Characteristics.
Grounded and Ungrounded Neutral Systems.- Effects of Ungrounded Neutral
on system performance. Methods of Neutral Grounding; Solid, Resistance,
Reactance - Arcing Grounds and Grounding Practices.
TEXTBOOKS:
1. Power System Protection and Switchgear by Badari Ram , D.N
Viswakarma, TMH Publications.
2. Switchgear and Protection - by Sunil S Rao, Khanna Publishers
REFERENCE BOOKS:
1. Transmission network Protection by Y.G Paithankar /Taylor and
Francis,2009.
2. Power system protection and switch gear by Bhuvanesh Oza, TMH,
2010.
3. Electrical Power Systems - by C.L.Wadhwa, New Age international (P)
Limited, Publishers.
4. Principles of power systems -by V.K. Mehta & Rohit Mehta, S. Chand
and company Ltd publishers
106
UTILIZATION OF ELECTRICAL ENERGY

4 1/0/0 4
OBJECTIVE : This course introduces the various ways of utilization of
Electrical Energy which emphasis more on types of Electric drives, Electric
heating, illumination and Electric traction.
UNIT - I
ELECTRIC HEATING & ELECTRIC WELDING : Advantages and methods of
electric heating, resistance heating induction heating and dielectric heating.
Electric welding, resistance and arc welding, electric welding equipment,
comparison between A.C. and D.C. Welding.
UNIT - II
ILLUMINATION FUNDAMENTALS & VARIOUS ILLUMINATION METHODS:
Introduction, terms used in illumination, laws of illumination, polar curves,
photometry, integrating sphere, sources of light. Filament lamps,Arc Lamps,
Discharge lamps, Stroboscopic effect,MV and SV lamps comparison between
tungsten filament lamps and fluorescent tubes, Types of Light fittings,Basic
principles of light control, Types and design of lighting and flood lighting.
UNIT - III
SELECTION OF ELECTRIC DRIVES : Type of electric drives, choice of motor,
starting and running characteristics, speed control, temperature rise,
particular applications of electric drives, types of industrial loads,
continuous, intermittent and variable loads, load equalization.
UNIT - IV
ELECTRIC TRACTION – I : System of electric traction and track electrification.
Review of existing electric traction systems in India. Special features of
traction motor, methods of electric braking-plugging rheostatic braking and
regenerative braking. Mechanics of train movement. Speed-time curves for
different services- trapezoidal and quadrilateral speed time curves.
UNIT - V
ELECTRIC TRACTION-II : Calculations of tractive effort, power, specific energy
consumption for given run, effect of varying acceleration and braking
retardation, adhesive weight and braking retardation adhesive weight and
coefficient of adhesion.
TEXT BOOKS:
1. Utilization of Electric Energy – by E. Openshaw Taylor, Orient Longman.
2. Art & Science of Utilization of electrical Energy – by Partab, Dhanpat
Rai & Sons.
107
REFERENCE BOOKS:
1. Utilization of Electrical Power including Electric drives and Electric
traction – by N.V.Suryanarayana, New Age International (P) Limited,
Publishers, 1996.
2. Generation, Distribution and Utilization of electrical Energy – by C.L.
Wadhwa, New Age International (P) Limited, Publishers, 1997.
3) A Text Book on Power System Engineering by M.L.Soni, P.V.Gupta,
U.S.Bhatnagar and A.Chakraborti, DhanpatRai& Co. Pvt. Ltd., 1999.
108
POWER SYSTEM OPERATION & CONTROL

4 1/0/0 4
OBJECTIVE : This course introduces Economic operation of power systems,
Hydro Thermal scheduling, Modeling of Turbine Generator and Automatic
controllers,
Load-Frequency controllers and Reactive Power Control in power systems.
UNIT - I
ECONOMIC OPERATION OF POWER SYSTEMS : Optimal operation of
Generators in Thermal Power Stations, - heat rate Curve-Fuel Cost Curve –
Incremental fuel and Production costs, input-output characteristics,
Optimum generation allocation with line losses neglected.
Solution Methods : Lamda Iteration, Gradient, Newton’s & Dynamic
Programing Methods, Optimum generation allocation including the effect
of transmission line losses – Loss Coefficients, General transmission line
loss formula.
UNIT - II
HYDROTHERMAL SCHEDULING : Optimal scheduling of Hydrothermal
System: Hydroelectric power plant models, Scheduling numericals-Short
term Hydrothermal scheduling problem.
SOLUTION METHODS: Gradient and Dynamic Programing Methods.
UNIT - III
MODELLING OF TURBINE, GOVERNOR : MODELLING OF TURBINE : First
order Turbine model, Block Diagram representation of Steam Turbines and
Approximate Linear Models.
MODELLING OF GOVERNOR: Mathematical Modelling of Speed Governing
System – Derivation of small signal transfer function.
MODELLING OF INTEGRATED PRIME-MOVER-GENERATOR-LOAD SYSTEM
: Generator Model, Load Model, Tie-Line Model.
UNIT - IV
SINGLE AREA AND TWO AREA LOAD FREQUENCY CONTROL : Necessity of
keeping frequency constant. Definitions of Control area – Single area control
– Block diagram representation of an isolated power system – Steady state
analysis – Dynamic response – Uncontrolled case.
Load frequency control of Two-Area system: uncontrolled and controlled
cases, Tie-line bias control. Proportional plus Integral control of single area
and two area systems, block diagram representation, steady state and
transient response simulation.
109
UNIT - V
REACTIVE POWER COMPENSATION AND CONTROL : Modelling of
Excitation Systems: Fundamental Characteristics of an Excitation system,
Ttransfer function, Block Diagram Representation of IEEE Type-1 Model.
Overview of Reactive Power control – Reactive Power compensation in
transmission systems, Advantages and disadvantages of series and shunt
types of compensation for transmission systems; load compensation –
Specifications of load compensator.
TEXT BOOKS:
1. Power Generation, Operation and Control by A.J. Wood & B.F.
Wollenberg,Second Edison,1996, John Wiley & Sons, A Wiley-
Interscience Publication.
2. Electrical Power Systems by C.L.Wadhwa, Newage International-3rd
Edition
3. Modern Power System Analysis – by I.J.Nagrath & D.P.Kothari Tata
McGraw – Hill Publishing Company Ltd, 2nd edition.
REFERENCE BOOKS:
1. Power System Analysis and Design by J.Duncan Glover and M.S.Sarma.,
Thomson Publishers, 3rd Edition.
2. Electric Energy systems Theory – by O.I.Elgerd, Tata Mc Graw-hill
Publishing Company Ltd., Second edition.
3. Power System Analysis by Grainger and Stevenson, Tata McGraw Hill.
4. Power System Analysis by Hadi Saadat – TMH Edition.
110
HIGH VOLTAGE ENGINEERING

(Elective- I)
3 1/0/0 3
OBJECTIVE : In this course the more emphasis on Introduction to High
Voltage Technology,The break down gaseous , liquid, and solid Dielectrics,
Generation, measurement & testing of high voltages and High Currents.
UNIT - I
HIGH VOLTAGE TECHNOLOGY AND APPLICATIONS : Electric Field Stresses,
Gas / Vaccum as Insulator, Liquid Dielectrics, Solids and Composites,
Estimation and Control of Electric Stress, Numerical methods for electric
field computation, Surge voltages, their distribution and control,
Applications of insulating materials in transformers, rotating machines,
circuit breakers, cable power capacitors and bushings.
UNIT - II
BREAK DOWN IN GASEOUS, LIQUID AND SOLID DIELECTRICS : Gases as
insulating media, collision process, Ionization process, Townsend‘s criteria
of breakdown in gases, streamer theory, Paschen‘s law.
Liquid as Insulator, pure and commercial liquids, breakdown in pure and
commercial liquids.
Intrinsic breakdown, electromechanical breakdown, thermal breakdown,
breakdown of solid dielectrics in practice, Breakdown in composite
dielectrics, solid dielectrics used in practice
UNIT - III
GENERATION OF HIGH VOLTAGES AND CURRENTS
Generation of High Direct Current Voltages, Generation of High alternating
voltages, Generation of Impulse Voltages, Generation of Impulse currents,
Tripping and control of impulse generators.
UNIT - IV
MEASUREMENT OF HIGH VOLTAGES AND CURRENTS : Measurement of
High Direct Current voltages, Measurement of High Voltages alternating
and impulse, Measurement of High Currents-direct, alternating and Impulse,
Oscilloscope for impulse voltage and current measurements.
Measurement of D.C Resistivity, Measurement of Dielectric Constant and
loss factor, Partial discharge measurements.
111
UNIT - V
HIGH VOLTAGE TESTING AND INSULATION CO-ORDINATION : Testing of
Insulators and bushings, Testing of Isolators and circuit breakers, Testing of
cables, Testing of Transformers, Testing of Surge Arresters, Radio
Interference measurements.
Principles of Insulation Coordination on High voltage and Extra High Voltage
power systems.
TEXT BOOKS:
1. High Voltage Engineering by M.S.Naidu and V. Kamaraju – TMH
Publications, 3rd Edition
2. High Voltage Engineering: Fundamentals by E.Kuffel, W.S.Zaengl,
J.Kuffel by Elsevier, 2nd Edition.
REFERENCE BOOKS:
1. High Voltage Engineering by C.L.Wadhwa, New Age Internationals (P)
Limited, 1997.
2. High Voltage Insulation Engineering by Ravindra Arora, Wolfgang
Mosch, New Age International (P) Limited, 1995.
112
DIGITAL SIGNAL PROCESSING

(ELECTIVE-I)
3 1/0/0 3
UNIT - I
SIGNAL ANALYSIS AND LTI SYSTEMS : Anology between vectors and signals,
Classification of signals with examples, classification of systems with examples
FOURIER SERIES: Trigonometric Fourier series. Exponential Fourier series, Line
spectrum. Properties of Fourier series, Dirchlet’s conditions, Numericals. Fourier
Transform: Fourier transform and relation between Fourier series and Fourier
transform (F.T), Properties of Fourier Transform, Conditions for existence of F.T,
Inverse Fourier Transform, Significance of energy density and power density
spectrums, Evalution of convolution Integral, Numericals.
Linear system. Impulse response. Response of a linear system. Linear time
invariant (LTI) system, Transfer function of a LTI system, Filter characteristics of
linear systems, Distortion less transmission through a system, Physical
Realizability of LTI systems, Ideal LPF, HPF and BPF characteristics, Relation
between rise time and band width of a system, Relation between input and
output Power Spectral Densities, Sampling Theorem and Signal Reconstruction.
Aliasing, Numericals
UNIT - II
LAPLACE AND Z- TRANSFORMS : Laplace Transform (L.Tj: Concept of L.T,
properties of Laplace Transform, Region of Convergence, Solution to differential
equations, Inverse Laplace Transform, Numericals.
Z-TRANSFORMS (Z.T) : Concept of Z.T. properties of Z- Transform, Region of
convergence. Inverse Z-Transform, Solution to difference equations. Relation
between FT,L.T and Z.T, Numericals.
UNIT - III
INTRODUCTION TO DSP AND DISCRETE FOURIER SERIES: Discrete Time (DT)
signals and sequences, Properties of DT LTI system -
Linearity, Time invariance, Stability, Causality, memoryless, linear Constant
Coefficient Difference Equations and its solution, Concept of Discrete Time
Fourier Transform (DTFT), Frequency domain representation of discrete time
signals and systems. Properties of DTFT. Numericals.
Discrete Fourier series (DFS): DFS representation of periodic sequences,
Properties, Numericals
UNIT - IV
DISCRETE FOURIER AND FAST FOURIER TRANSFORMS: Discrete Fourier
Transform (DFT): Discrete Fourier Transform, Properties of DFT, Linear
113
convolution of sequence using DFT, Computation of DFT, Relation between
DTFT, DFS, Z.T and DFT, Numericals
Fast fourier transforms(FFT) - Radix -2 Decimation - in- time (DIT) and Decimation
- in- frequency (DIF) FFT Algorithms, Comparison of DIT FFT and DIF FFT, Inverse
FFT, and FFT for composite N, numericals
UNIT - V
IIR AND FIR DIGITAL FILTERS :
IIR Filters: Analog filter approximations - Butterworth and Chebyshev, Design
of IIR Digital filter from Analog filter- Step Invariance, impulse invariance and
bilinear transformation techniques, design examples, realization of IIR filters -
direct, canonic, cascade, and parallel forms.
FIR Filters: Characteristics of FIR digilal filters, frequency response, design of
FIR digital filters-fourier method, window techniques, frequency sampling
technique, comparison of IIR and FIR filters, realization of FIR filters - direct,
canonic, cascade, and parallel forms.
TEXTBOOKS:
1. Signals, systems and communications B.P. lathi B.S. publications 2009
2. Digital Time Signal Processing -A.V.Oppenheim and R.W. Schaffer, and JR
Buck pearson education 2009.
3. Fundamentals of Digital Signal Processing- Loney ludeman, John wiiey2010
114
DIGITAL CONTROL SYSTEMS

(Elective – I)
3 1/0/0 3
OBJECTIVE : To give the students insight knowledge about the digital design
methodologies in control systems and the stability analysis of digital control
systems in order to enable the students to deal with real-time applications.
UNIT - I
SAMPLING AND RECONSTRUCTION : Introduction, Examples of Data
control systems – Digital to Analog conversion and Analog to Digital
conversion, sample and hold operations.
Z – TRANSFORMS: Introduction, Linear difference equations, pulse
response, Z – transforms, Theorems of Z – Transforms, the inverse Z –
transforms, Modified Z transforms.
UNIT-II
Z-PLANE ANALYSIS OF DISCRETE-TIME CONTROL SYSTEM : Z-Transform
method for solving difference equations; Pulse transforms function, block
diagram analysis of sampled – data systems, Mapping between the S-Plane
and the Z-Plane – Primary strips and Complementary Strips – Constant
frequency loci, Constant damping ratio loci.
UNIT - III
STATE SPACE ANALYSIS : State Space Representation of discrete time
systems, Pulse Transfer Function Matrix solving discrete time state space
equations, State transition matrix and it’s Properties, Methods for
Computation of State Transition Matrix, Discretization of continuous time
state – space equations.
Concepts of Controllability and Observability, Tests for controllability and
Observability. Duality between Controllability and Observability,
Controllability and Observability conditions for Pulse Transfer Function
UNIT - IV
STABILITY ANALYSIS : Stability Analysis of closed loop systems in the Z-
Plane. Jury stablility test – Stability Analysis by use of the Bilinear
Transformation and Routh Stability criterion, Root locus techniques for
discrete systems.
Design of control systems by conventional method:Transient and steady –
State response Analysis – Design based on the frequency response method
– Bilinear Transformation and Design procedure in the w-plane, Lead, Lag
and Lead-Lag compensators and digital PID controllers.
115
UNIT – V
STATE FEEDBACK CONTROLLERS AND OBSERVERS : Design of state feedback
controller through pole placement – Necessary and sufficient conditions,
Ackerman’s formula.
State Observers – Full order and Reduced order observers.
TEXT BOOK:
1. Discrete -Time Control Systems –k.Ogata, pearson education /PHI.2nd
edition.
REFERENCE BOOKS
1. Digital Control Sytems , Kuo, Oxfored university Press, 2nd edition 2003.
2. Digital Control and state variable Methods by M.Gopal, TMH.
116
OPTIMIZATION TECHNIQUES
(ELECTIVE-II)
3 1/0/0 3
OBJECTIVES : Principles of optimization are essential to all disciplines of
Engineering students. Optimization Techniques are very much helpful in
design of Electrical Machines like motors , transformers and other
equipments. This is an introductory course which imparts the students
knowledge in optimization principles of Linear Programming and Non-Linear
programming methods.
UNIT-I
INTRODUCTION AND CLASSICAL OPTIMIZATION TECHNIQUES : Statement
of an Optimization problem- design vector -design constraints -constraint
surface - objective function - objective function surfaces - classification of
Optimization numericals. Single variable Optimization-multi variable
Optimization without constraints - necessary and sufficient conditions for
minimum/maximum - multi variable Optimization with equality constraints.
Solution by method of Lagrange multipliers - multi variable Optimization
with inequality constraints - Kuhn - Tucker conditions.
UNIT-II
LINEAR PROGRAMMING : Standard form of a linear programming problem
- geometry of linear programming numericals - definitions and theorems -
solution of a system of linear simultaneous equations - pivotal reduction
of a general system of equations - motivation to the simplex method -
simplex algorithm.
UNIT -III
TRANSPORTATION PROBLEM: Finding initial basic feasible solution by north
- west corner rule, least cost method and Vogel’s approximation method -
testing for optimality of balanced transportation numericals and Un-
balanced transportation numericals. Application of Transportation models
to Production-Inventory-distribution systems.
UNIT - IV
UNCONSTRAINED AND CONSTRAINED NONLINEAR PROGRAMMING : One
- dimensional minimization methods: Classification, Fibonacci method and
Quadratic interpolation method, Univariate method, Powell’s method and
steepest descent method.
UNIT - V
Dynamic Programming : Dynamic programming multistage decision
processes - types - concept of sub optimization and the principle of optimally
117
- computational procedure in dynamic programming - examples illustrating
the calculus method of solution - examples illustrating the tabular method
of solution.
TEXTBOOKS:
1. “Engineering optimization: Theory and practice”-by S. S.Rao. New Age
International (p) Limited. 3rd edition, 1998.
2. “Introductory Operations Research” by H.S. Kasehe & K.D. Kumar,
Springer (India), Pvt .Ltd.
REFERENCE BOOKS:
1. ”Optimization Methods in Operations Research and systems Analysis”
- by K.V. Mittal and C. Mohan. New Age International (P) Limited,
Publishers. 3"1 edition. 1996.
1. Operations Research - by Dr. S.D.Sharma.
2. ‘’Operations Research : An Introduction”- by H.A.Taha.PearsoriPvt.Ltd.
3. Linear Programming - by G. Had ley
118
ELECTRICAL DISTRIBUTION SYSTEMS

(ELECTIVE-II)
3 1/0/0 3
OBJECTIVE : This course introduces the general concepts of Electrical
Distribution system, feeders , substations, coordination of protective
devices, Compensation for power factor improvement and voltage control,
Distributed Generation & their impacts on distribution systems.
UNIT -I
MODELLING AND CHARACTERISTICS OF LOADS : Introduction to
distribution systems, Load modelling and characteristics. Coincidence factor,
contribution factor, loss factor - Relationship between the load factor and
loss factor. Classification of loads (Residential, commercial Agricultural and
Industrial) and their characteristics.
UNIT -II
SUBSTATIONS AND DISTRIBUTION FEEDERS : Location of Substations:
Rating of distribution substation, service area within primary feeders.
Benefits derived through optimal location of substations.
Design Considerations of Distribution Feeders: Radial and loop types of
primary feeders, voltage levels, feeder loading, basic design practice of the
secondary distribution systems.
UNIT-III
DISTRIBUTED GENERATION & SYSTEM ANALYSIS : Introduction of
distributed generation sources like Solar PV, Small Wind & Hydro, Biomass/
Bio-Diesel based generators into distribution systems, Their basic models
and interfacing arrangements with low and medium voltage grids, Voltage
drop and power-loss calculations on distribution systems with and without
distributed generators (DG’s).
UNIT-IV
PROTECTION AND PROTECTIVE DEVICES COORDINATION : Objectives of
distribution system protection, types of common faults and procedure for
fault calculations. Protective Devices: Principle of operation of Fuses, Circuit
Reclosers, line sectionalizers and circuit breakers.
Coordination of Protective Devices, Coordination Procedure with & without
DG’s.
UNIT-V
POWER FACTOR IMPROVEMENT AND VOLTAGE CONTROL : Capacitive
compensation for power-factor control. Different types of power capacitors,
119
shunt and series capacitors, effect of shunt capacitors (Fixed and switched).
Power factor correction, capacitor allocation - Economic justification -
Procedure to determine the best capacitor
Voltage Control: Equipment for voltage control, effect of series capacitors,
effect of AVB/AVR, line drop compensation.
TEXTBOOKS:
1. Electric Power Distribution system‘s, Engineering” - by Turan Gonen,
CRC Press.
2. Electrical Power Distribution Systems by V.Kamaraju , TMH, 2/e, 2010
REFERENCE BOOKS:
1. Electrical Power Distribution hand book by g.Ram murthy, 2 nd,
University press
2. Electric Power Distribution - by A.S. Pabla, Tata Mc Graw-Hill Publishing
company, 5th Edition, 1997.
120
VLSI
(ELECTIVE-II)
(Common to ECE, ETM, EEE, ICE, IT)
3 1/0/0 3
OBJECTIVES : The goal of the course is to introduce design concepts and
Architecture underlying modern complex VLSI and system-on-chip. The
course is build upon student’s prior knowledge of digital circuits, digital
logic and Computer Architecture. The concepts teach how complex chip-
scale systems can be designed. The course is designed to give the student
an understanding of different design steps required to carry out a complete
digital VLSI design in silicon and to apply CMOS Technology specific layout
rules in the placement and routing of transistors and interconnect, and to
verify the functionality, timing, power and parasitic effects. The course main
objective is to introduce the fundamental principles of VLSI Circuit design
and layout and to cover the basic building blocks of large scale CMOS digital
Integrated circuits. It also describes the general steps required for processing
of CMOS Integrated circuits and to design functional units.
UNIT - I
INTRODUCTION : Introduction to IC Technology -MOS, PMOS, NMOS, CMOS
& BiCMOS fabrication
Technologies; fabrication processes: Oxidation, Lithography, Diffusion, Ion
implantation, Metallization, Etching, Planarization, Encapsulation,
Integrated Resistors and Capacitors, CMOS Nanotechnology.
UNIT - II
BASIC ELECTRICAL PROPERTIES : Basic Electrical Properties of MOS and
BiCMOS Circuits: Ids-Vds relationships, MOS transistor threshold Voltage
Vt, gm, gds, Figure of merit Éo; Pass transistor, NMOS Inverter, Various pull
ups, CMOS Inverter - analysis and design, BiCMOS Inverters.
VLSI CIRCUIT DESIGN PROCESSES : VLSI Design Flow, MOS Layers, Stick
Diagrams, Design Rules and Layout, 2 ¼m CMOS Design rules for wires,
contacts and Transistors, Layout Diagrams for NMOS and CMOS Inverters
and Gates, Scaling of MOS circuits.
UNIT - III
GATE LEVEL DESIGN : Logic Gates and Other complex gates, Switch logic,
Alternate gate circuits, Time delays, Driving large capacitive loads, Wiring
capacitance, Fan–in, Fan–out, Choice of layers.
DATA PATH SUBSYSTEMS : Subsystem Design, Shifters, Adders, ALUs,
Multipliers, Parity generators, Comparators, Zero/One Detectors, Counters.
121
UNIT - IV
ARRAY SUBSYSTEMS : SRAM, DRAM, ROM, Serial Access Memories, Content
Addressable Memory.
SEMICONDUCTOR INTEGRATED CIRCUIT DESIGN : PLAs, Programmable
Array Logic, FPGAs, CPLDs, Standard Cells, Design Approach, Introduction
to low power design.
UNIT - V
CMOS TESTING : CMOS Testing, Need for testing, Test Principles, Wafer-
level, package-level testing, System-level Test Techniques, Layout Design
for improved Testability, Principles of Design for testability (DFT).
TEXT BOOKS :
1. Essentials of VLSI circuits and systems – Kamran Eshraghian, Douglas
A. Pucknell, Sholeh Eshraghian, PHI, 2005 Edition
2. VLSI Designing- K .Lal Kishore, V. S. V. Prabhakar, I.K International, 2009.
3. CMOS VLSI Design – A circuits and systems perspective, Neil H. E Weste,
David Harris, Ayan Banerjee, Pearson, 2009.
REFERENCES:
1. CMOS logic circuit Design - John .P. Uyemura, Springer, 2007.
2. Modern VLSI Design - Wayne Wolf, Pearson Education, 3rd Edition, 1997.
3. VLSI Design – A. Albert Raj, Latha, PHI, 2008
4. Introduction to VLSI – Mead & Convey, BS Publications, 2010
5. VLSI Design – M. Micheal Vai, CRC Press, 2009.
122
INSTRUMENTATION
3 0/0/0 3
OBJECTIVE : Instrumentation is an art and science of measurement and
control of process variables within a production or manufacturing area.
This course deals with Measurement systems, characteristics, errors and deals
with special measuring instruments like voltmeters CRO’s and signal analyzers.
This course introduces basic Transducers and fundamental principles to sense
electrical and Non-electrical quantities.
UNIT-I
MEASUREMENT SYSTEMS : Introduction to Measurement Systems and
signals, Performance Characteristics: Static characteristics - Dynamic
Characteristics; Errors in Measurement: Gross Errors - Systematic Errors -
Statistical Analysis of Random Errors.
UNIT-II
VOLTMETERS : Peak and Average responding voltmeters; True RMS voltmeter;
Vector impedance meter; Q meter; Digital voltmeters: Ramp type – Integrating
type – Potentiometric type - Successive approximation type - Continuous
balance type; Digital frequency meter: frequency and time period
measurements.
UNIT-III
CRO and SIGNAL ANALYZERS : Cathode Ray oscilloscope (CRO): Cathode ray
tube-time base generator-horizontal and vertical amplifiers-CRO probes-
applications; CRO Measurement: phase and frequency-lissajous patterns;
Special CRO’s: Sampling oscilloscope-analog and digital storage oscilloscopes.
Wave Analyzers: Basic - Frequency selective – Heterodyne wave analyzers;
Harmonic Distortion Analyzers; Spectrum analyzers.
UNIT-IV
TRANSDUCERS : Introduction to Transducers: Classification – Advantages
- Characteristics; Resistive Transducers: Potentiometers - strain gauges-
Thermometers – Thermistors; Thermocouples; Inductive Transducers: Inductive
pickups-LVDT- RVDT; Capacitive Transducers: single and differential
arrangements; Piezo electric and Hall effect transducers; Optoelectronic
transducers: photovoltaic - photo conductive cells - photo diodes and
transistors.
UNIT - V
MEASUREMENT OF NON-ELECTRICAL QUANTITIES : Displacement Transducers;
Pressure Transducers; Temperature Transducers; Flow Transducers; Level
Transducers; Force Transducers; Velocity/ speed Transducers; Acceleration
Transducers.
123
TEXTBOOKS:
1. A course in Electrical and Electronic Measurements and
Instrumentation - A.K. Sawhney, Dhanpatrai & Co.
2. Electronic Instrumentation- H. S. Kalsi, Tata McGraw-Hill.
REFERENCE BOOKS:
1. Modern Electronic Instrumentation and Measurement techniques
- A.D Helfrick and W.D.Cooper, Pearson/Prentice Hall of India.
2. Transducers and Instrumentation - D.V.S Murthy, Prentice Hall of India.
3. Measurements Systems, Applications and Design - D O Doeblin, TMH
Publications.
4. Principles of Measurement and Instrumentation - A.S Morris,
Pearson /Prentice Hall of India
124
ELECTRICAL SIMULATION LAB

0 0/3/0 2
OBJECTIVE : Students are expected to realize the design numericals they
have studied in various subjects using the software simulations. Theoretical
analysis and result are compared with practical values.
The following are the experiments that are compulsory:
1. Simulation of Transient Analysis of RLC Circuits to an
a) (i) Pulse input (ii) Step input (iii) Sinusoidal input.
b) Simulation of DC Circuit for determining Thevenin’s Equivalent
2. Fault analysis of power systems.
3. Simulation of
1. Single Phase AC Voltage Controller using RL load.
2. Single Phase Full Converter using R,L and E loads.
3. Simulation of
1. Resonant Pulse Commutation Circuit.
2. Buck chopper.
3. Root locus and bode plot of a second order system.
4. Stability Analysis of Linear Time Invariant Systems.
5. Load flow analysis of 3 –bus system.
6. Simulation of Single phase Inverter with PWM control
Any Two from the following list are required to be conducted apart from
the above list:
1. Modeling of Transformer and Simulation of lossless transmission line.
2. Simulation of Op-Amp based Integrator and Differentiator circuits.
3. Simulation of Dynamic Systems (Single area and two area Power
Systems).
4. Simulation of Parametric Analysis of RLC Circuits to a step response
125
CONTROL SYSTEMS LAB

0 0/3/0 2
The following are to be conducted as compulsory experiments
1. Time response of Second order system
2. Characteristics of Synchros.
3. Programmable logic controller - Study and verification of truth tables
of logic gates, simple Boolean expression and application of speed
control of motor.
4. Effect of feedback on DC servo motor
5. Effect of PD, PI, PID Controllers on a second order systems
6. Lag and lead compensation— Magnitude and phase plot
7. Characteristics of magnetic amplifiers
8. Characteristics of AC servo motor
Any two simulation experiments are to be conducted:-
1. Transfer function of DC motor
2. Temperature controller using PID
3. Transfer function of DC generator
4. Characteristics of DC servo motor
126
INDUSTRY ORIENTED MINI PROJECT

- -/-/- 2
There shall be an industry-oriented mini-Project, in collaborate with an
industry of their specialization, to be taken up during the vacation after III
year II Semester examination. The industry oriented mini project shall be
submitted in report form and should be presented before the committee,
which shall evaluate for 50 marks. The committee consists of an external
examiner, head of the department, the supervisor of mini project and a
senior faculty member of the department. There shall be no internal marks
for industry oriented mini project.
127
HVDC TRANSMISSION
IV YEAR B.Tech EEE II-Sem L T/P/D C
3 1/0/0 3
OBJECTIVE : This subject gives the knowledge of the Transmission using DC
values and the design parameters to be considered for the same.
UNIT-I
HVDC TRANSMISSION: BASIC CONCEPTS : Historical development–Equipment
required for HVDC systems- Comparison of AC and DC Transmission-Limitations
of HVDC Transmission Lines- Reliability of HVDC Systems-Types of HVDC Links
- Planning & Modern trends in D.C. Transmission- Standard rated voltages of
HVDC and EHVAC systems.
UNIT-II
HVDC CONVERTERS : Analysis of HVDC Converters: Choice of Converter
configuration using Pulse Number – Detailed Analysis of Graetz circuit –
Analysis of Voltage waveforms with Overlap Angle(μ) – Voltage drop in Per
Unit Quantities- Complete Characteristics of converter as Rectifier/Inverter-
Characteristics of 12 Pulse converters.
CONTROL OF CONVERTERS : Principal of DC Link Control - Converters Control
Characteristics – Hierarchy and basic philosophy - Firing angle control –
Extinction angle control - Current control - Starting and stopping of DC
link -Power Control.
UNIT-III
CONVERTER FAULTS & PROTECTION : Types of faults- Faults on AC side
of Converter Stations-Converter faults – Faults on DC side of the System
- Protection against over current and over voltage in converter station -
Surge arresters - Smoothing reactors – Transient over voltages in DC
line- DC breakers - Corona effects on DC lines - Radio interference.
UNIT-IV
HARMONICS AND HVDC FILTERS : Harmonics in HVDC: Generation of
Harmonics - Characteristics harmonics - Calculation of AC Harmonics - Non-
Characteristics harmonics - Adverse effects of harmonics - Calculation of voltage
& Current harmonics - Effect of Pulse number on harmonics.
Filter configuration- Types of AC filters- Design of Single tuned filters – Minimum
Cost of Tuned AC Filters- Design of high pass Filters.
Reactive Power Requirements in steady state-Conventional control
strategies-Alternate control strategies-sources of reactive power-AC Filters -
shunt capacitors-synchronous condensers.
128
UNIT- V
MULTITERMINAL DC SYSTEMS : Types of Multi terminal Systems –
Control and Protection of MTDC Systems – Study of MTDC Systems-
Potential applications of MTDC systems
TEXTBOOKS:
1. HVDC Power Transmission Systems: Technology and system
Interactions - by K.R.Padiyar, New Age International (P) Limited, and
Publishers.
2. EHVAC and HVDC Transmission Engineering and Practice - S.Rao.
REFERENCEBOOKS:
1. HVDC Transmission- J.Arrillaga.
2. Direct Current Transmission - by E.W.Kimbark, John Wiley & Sons.
3. Power Transmission by Direct Current-by E.Uhlmann. B.S.
Publications.
4. HVDC Transmission – S.Kamakshaiah and V.Kamaraju.
129
NEURAL NETWORKS & FUZZY LOGIC
(ELECTIVE-III)
3 1/0/0 3
OBJECTIVE: This course introduces basic concepts of artificial neural
networks and fuzzy logic which are useful in applications of electrical and
electronics engineering.
UNIT - I
INTRODUCTION TO NEURAL NETWORKS : Introduction, Humans and
Computers, Organization of the Brain, Biological Neuron, Biological and
Artificial Neuron Models, Hodgkin-Huxley Neuron Model, Integrate-and-
Fire Neuron Model, Spiking Neuron Model, Characteristics of ANN,
McCulloch-Pitts Model, Historical Developments, Potential Applications of
ANN.
ESSENTIALS OF ARTIFICIAL NEURAL NETWORKS : Artificial Neuron Model,
Operations of Artificial Neuron, Types of Neuron Activation Function, ANN
Architectures, Connectivity, Learning Strategy (Supervised, Unsupervised,
Reinforcement), Learning Rules, Types of Application.
UNIT - II
SINGLE LAYER FEED FORWARD NEURAL NETWORKS : Introduction,
Perceptron Models: Discrete, Continuous and Multi-Category, Training
Algorithms: Discrete and Continuous Perceptron Networks, Perceptron
Convergence theorem.
UNIT - III
MULTILAYER FEED FORWARD NEURAL NETWORKS : Credit Assignment
Problem, Generalized Delta Rule, Derivation of Back Propagation (BP)
Training, Summary of Back propagation Algorithm, Learning Difficulties and
Improvements. Associative Memories
Paradigms of Associative Memory, General Concepts of Associative Memory,
Bidirectional Associative Memory (BAM) Architecture, Architecture of
Hopfield Network: Discrete and Continuous versions.
UNIT - IV
FUZZY LOGIC SYSTEM COMPONENTS : Fuzzification, Membership value
assignment, development of rule base and decision making system,
Defuzzification to crisp sets, Defuzzification methods and Fuzzy Control
System.
130
UNIT - V
APPLICATIONS : Neural network applications: Process identification,
control, fault diagnosis and load forecasting.
FUZZY LOGIC APPLICATIONS : Fuzzy logic control and Fuzzy classification.
TEXT BOOKS:
1. Introduction to Artificial Neural Networks, Jacek, M. Zurada, West
1992.
2 Fuzzy Logic with Engineering Applications by Timothy J. Ross, Wiely
Publications
REFERENCE BOOKS:
1. Neural Networks – Simon Hakins , Pearson Education
2. Neural Networks and Fuzzy Logic System by Bart Kosko, PHI
Publications.
3. Neural Networks, Fuzzy logic, Genetic algorithms: synthesis and
applications by Rajasekharan and Rai – PHI Publication.
4. Introduction to Neural Networks using MATLAB 6.0 - S.N.Sivanandam,
S.Sumathi, S.N.Deepa, TMH, 2006
131
LINEAR SYSTEM ANALYSIS
(ELECTIVE-III)
3 1/0/0 3
OBJECTIVE : This course introduces application of Various mathematical
tools to Electrical circuits. It also gives the detailed study of network
synthesis. In addition discrete and continuous signal analysis are also
discussed.
UNIT-I
STATE VARIABLE ANALYSIS : Choice of state variables in Electrical networks-
Formulation of state equations for Electrical networks-Equivalent source
method. Network topological method - Solution of “State equations-
Analysis of simple networks with state variable approach .
UNIT-II
APPLICATIONS OF FOURIER SERIES AND FOURIER TRANSFORM
REPRESENTATION : Introduction, Trigonometric form of Fourier series,
Exponential form of Fourier series. Wave symmetry. Fourier integrals and
transforms, Fourier transform of a periodic function, Properties of Fourier
Transform. Parseval ‘s theorem , Fourier transform of some common signals.
Fourier transform relationship with Laplace Transform. Effective value and
average values of non sinusoidal periodic waves, currents , Power Factor
Effects of harmonics. Application in Circuit Analysis, Circuit Analysis using
Fourier Series. Fourier transform relationship with Laplace Transform.
UNIT-III
LAPLACE TRANSFORM APPLICATIONS : Application of Laplace transform
Methods of Analysis - Response of RL, RC, RLC Networks to Step, Ramp,
and impulse functions. Shifting Theorem - Convolution Integral-Applications.
Fourier transform relationship with Laplace Transform.
UNIT-IV
TESTING OF POLYNOMIALS AND NETWORK SYNTHESIS : Elements of
realisability-Hurwitz polynomials-positive real functions-Proper ties-Testing-
Sturm’s Test, examples .Network synthesis: Synthesis of one port LC
networks-Foster and Cauer methods-Synthesis of RL and RC one port
networks-Foster and Cauer methods
UNIT-V
SAMPLING AND Z-TRANSFORMS : Sampling theorem - Flat top Sampling,
Reconstruction of signal, effect of under sampling -Aliasing, introduction
to Band Pass sampling. Cross correlation and auto correlation of functions,
properties of correlation function, Energy density spectrum. Power density
132
spectrum. Relation between; auto correlation function and Energy / Power
spectral density function. Continuous and discrete time signals, discrete
time complex, exponential and sinusoidal signals, periodicity of discrete
time complex exponential, concept of Z-Transform. Region of convergence.
Constraints on ROC for various classes of signals, Inverse Z-Transform
properties of Z-Transforms. Distinction between Laplace, Fourier and Z-
Transforms.
TEXTBOOKS:
1. Network and Systems - D Roy Chowdhary, New Age International
2. Network Analysis and Synthesis - Umesh Sinha- Satya Prakashan
Publications
REFERENCE BOOKS:
1. Linear System Analysis-AN Tripathi, New Age International
2. Engineering Network Analysis and Filter Desgin- Gopal G Bhisk &
Umesh
3. Linear system analysis by A.Cheng, Oxford publishers.
133
RELIABILITY ENGINEERING AND APPLICATIONS TO POWER SYSTEMS

(ELECTIVE-III)
3 1/0/0 3
OBJECTIVE : This subject deals with the study, evaluation, and life-cycle
management of reliability: the ability of a system or component to perform
its required functions under stated conditions for a specified period of time.
UNIT-I
BASICS OF PROBABILITY THEORY & DISTRIBUTION : Basic probability
theory - rules for combining probabilities of events - Bernoulli’s trials -
probabilities density and distribution functions -binomial distribution-
expected value and standard deviation of binomial distribution.
UNIT - II
NETWORK MODELING & COMPOSITE SYSTEMS RELIABILITY ANALYSIS :
Analysis of Series, Parallel, Series-Parallel networks -complex networks-
decomposition method. - Reliability Indices - Weather Effects on
Transmission Lines.
UNIT-III
RELIABILITY FUNCTIONS : Reliability functions f(t), F(t), R(t), h(t) and their
relationships-exponential distribution - Expected value and standard
deviation of exponential distribution- Bath tub curve-reliability analysis of
series parallel networks using exponential distribution - reliability measures
MTTF, MTTR, MTBF.
UNIT - IV
MARKOV MODELLING , FREQUENCY & DURATION TECHNIQUES: Markov
chains - concept of stochastic transitional probability Matrix, Evaluation of
limiting state Probabilities. - Markov processes one component repairable
system - time dependent probability evaluation using Laplace transform
approach - evaluation of limiting state probabilities using STPM - two
component repairable models.
Frequency and duration concept - Evaluation of frequency of encountering
state, mean cycletime, for one, two component repairable models -
evaluation of cumulative probability and cumulative frequency of
encountering of merged states.
UNIT-V
GENERATION & DISTRIBUTION SYSTEM RELIABILITY ANALYSIS : Reliability
model of a generation system- recursive relation for unit addition and
removal - load modeling - Merging of generation load model -evaluation of
transition rates for merged state model - cumulative Probability, cumulative
134
frequency of failure evaluation -LOLP, LOLE.
Basic Concepts of Distribution system reliability-Evaluation of Basic and
performance reliability indices of radial networks.
TEXT BOOKS:
1. Reliability Evaluation of Engg. System- R.Billinton, R.N.Allan, Plenum
Press, New York, reprinted in India by B.S.Publications , 2007.
2. Reliability Evaluation of Power systems- R.Billinton, R.N.Allan, Pitman
Advance Publishing Program, New York, reprinted in India by
B.S.Publications,2007.
135
ADVANCED CONTROL SYSTEMS

(ELECTIVE-IV)
3 1/0/0 3
OBJECTIVE:
5. To give the students insight knowledge about the nonlinear control
systems.
6. To give the students methods of analysys of nonlinear systems such
as describing function and phase plane etc.control systems
7. and the stability analysis of non linear control systems in order to
enable the students to deal with real-time applications.
UNIT - I
STATE SPACE ANALYSIS, CONTROLLABILITY AND OBSERVABILITY : State
Space Representation, Solution of State Equation, State Transition Matrix,
Canonical Forms - Controllable Canonical Form, Observable Canonical Form,
Jordan Canonical Form.
Tests for controllability and observability for continuous time systems -Time
varying case, minimum energy control, time invariant case, Principle of
Duality, Controllability and observability form Jordan canonical form and
other canonical forms.
UNIT-II
DESCRIBING FUNCTION ANALYSIS : Introduction to nonlinear systems,
Types of nonlinearities, describing .j&mctions, describing function analysis
of nonlinear control systems.
PHASE-PLANE ANALYSIS : Introduction to phase-plane analysis. Method of
Isoclines for Constructing Trajectories, singular points, phase-plane analysis
of nonlinear control systems.
UNJT-III
STABILITY ANALYSIS : Stability in the sense of Lyapunov., Lyapunov’s stability
and Lypanov’s instability theorems. Direct method of Lypanov for the Linear
and Nonlinear continuous time autonomous systems.
UNIT -IV
MODEL CONTROL : Effect of state feedback on controllability and
observability. Design of State Feedback Control through Pole placement .
Full order observer and reduced order observer
136
UNTT-V
CALCULUS OF VARIATION & OPTIMAL CONTROL : Minimization of
functional of single function, Constrained minimization. Minimum principle.
Control variable inequality constraints. Control and state variable inequality
constraints. Euler Lagrangine Equation
Formulation of optimal control problem. Minimum time, Minimum enerGy,
minimum fuel numericals. State regulator problem. Output regulator
problem. Tracking problem, Continuous-Time Linear Regulators.
TEXTBOOKS:
1. Modern Control System Theory- by M. Gopal, New Age International
Publishers, 2nd edition, 1996
2. Modern Control Engineering - by K. Ogata, Prentice Hall of India, 3rd
edition, 1998
REFERENCE BOOKS:
1. Control Systems Engineering by I.J. Nagarath and M.Gopal, New Age
International (P) Ltd.
2. Digital Control and State Variable Methods - by M. Gopal, Tata Mc
Graw-Hill Companies, 1997.
3. Systems and Control by StainslawH. Zak, Oxford Press, 2003.
4. Modern control System - By Dorf, Pearson
137
EHV AC TRANSMISSION
(ELECTIVE-IV)
3 1/0/0 3
OBJECTIVE: This course is an extension of power systems transmission. It
deals with in depth inter related concepts of extra high voltage AC
transmission. Also this course gives examples on travelling wave theory
and voltage control.
UNIT-I
INTRODUCTION TO EHV AC : Necessity of EHV AC transmission - advantages
and numericals- power. Handling capacity and line losses- mechanical
considerations - resistance of conductors - Bundled conductors - bundle
spacing and bundle radius-Examples.
Line inductance and capacitances - sequence inductances and capacitances.
Modes of propagation - ground return - Examples
UNIT-II
VOLTAGE GRADIENTS OF CONDUCTORS : Electrostatics - field of sphere
gap - field of line changes and properties -charge - potential relations for
multi-conductors -surface voltage gradient on conductors - distribution: of
voltage gradient on sub-conductors of bundle-Examples.
ELECTROSTATIC FIELD: calculation of electrostatic field of EHV/AC lines -
effect on humans, animals and plants - electrostatic induction in
unenergised circuit of double-circuit line -electromagnetic interference-
Examples.
UNIT- III
TRAVELING WAVE THEORY : Traveling wave expression and solution- source
of excitation- terminal conditions- reflection and refraction coefficients-
Lumped parameters of distributed lines-generalized constants- No load
voltage conditions and charging current.
UNIT-IV
CORONA EFFECTS : Power loss and audible noise (AN) -corona loss formulae-
charge voltage diagram - generation, characteristics - limits and
measurements of AN -relation between I-phase and 3-phase AN levels -
Examples. Radio interference (RI) - corona pulses generation, properties,
limits -frequency spectrum - modes of propagation - excitation function -
measurement of RI, RIV and excitation functions-Examples.
138
UNIT-V:
VOLTAGE CONTROL : Power circle diagram and its use - voltage control
using synchronous condensers - cascade connection of shunt and series
compensation - sub synchronous resonance in series capacitor -
compensated lines - static VAR compensating system.
TEXTBOOKS:
1. EHV AC Transmission Engineering by R. D. Begamudre, New Age
International (p)Ltd.
2. HVAC and DC Transmission by S. Rao.
139
COMPUTER ORGANIZATION
(ELECTIVE-IV)
(COMMON TO CSE, IT,EEE)
3 1/0/0 3
OBJECTIVES : To acquire the knowledge of the basic hardware and software
issues of computer organization, to analyze the operational concepts of
computers data representation, to about the architecture and the features
of advanced processors, to learn Hierarchical memory system including
cache memories and virtual memory and to acquire the knowledge about
computer architecture, machine language, and low-level programming.
UNIT - I
BASIC STRUCTURE OF COMPUTERS : Computer Types, Functional unit,
Basic OPERATIONAL concepts, Bus structures, Software, Performance,
multiprocessors and multi computers. Data Representation, Fixed Point
Representation, Floating – Point Representation, Error Detection codes.
UNIT - II
REGISTER TRANSFER LANGUAGE AND MICROOPERATIONS : Register
Transfer language. Register Transfer Bus and memory transfers, Arithmetic
Micro-operations, logic micro operations, shift micro operations, Arithmetic
logic shift unit. Instruction codes, Computer Registers, Computer
instructions - Instruction cycle.
Memory - Reference Instructions, Input - Output and Interrupt, STACK
organization, Instruction formats, Addressing modes, DATA Transfer and
manipulation. Program control, Reduced Instruction set computer.
UNIT - III
MICRO PROGRAMMED CONTROL : Control memory, Address sequencing,
micro program example, design of control unit, Hard wired control, Micro
programmed control.
COMPUTER ARITHMETIC : Addition and subtraction, multiplication
Algorithms, Division Algorithms, Floating point Arithmetic operations,
Decimal Arithmetic unit, Decimal Arithmetic operations.
UNIT - IV
MEMORY ORGANIZATION : Memory hierarchy, Main memory, Auxiliary
memory, Cache memory, Virtual memory, Introduction to RAID.
INPUT-OUTPUT ORGANIZATION : Peripheral Devices, Input-Output
Interface, Asynchronous data transfer, Modes of Transfer, Priority Interrupt,
Direct memory Access, Input- Output Processor (IOP), Serial communication;
Introduction to peripheral component, Interconnect (PCI) bus. Introduction
140
to standard serial communication protocols like RS232, USB, and IEEE1394.
UNIT - V
PIPELINE AND VECTOR PROCESSING : Parallel Processing, Pipelining,
Arithmetic Pipeline, Instruction Pipeline, RISC Pipeline, Vector Processing,
Array Processors.
MULTI PROCESSORS : Characteristics or Multiprocessors, Interconnection
Structures, Interprocessor Arbitration. InterProcessor Communication and
Synchronization, Cache Coherence. Shared Memory Multiprocessors.
TEXT BOOKS:
1. Computer Organization - Carl Hamacher, Zvonks Vranesic, SafeaZaky,
Vth Edition, McGraw Hill.
2. Computer Systems Architecture - M.Moris Mano, IIIrd Edition, Pearson/
PHI
REFERENCES:
1. Computer Organization and Architecture - William Stallings Sixth
Edition, Pearson/PHI
2. Structured Computer Organization - Andrew S. Tanenbaum, 4th Edition
PHI/Pearson
141
SEMINAR
(Common to all branches)
3 0/2/0 2
There shall be a seminar presentation in IV year II Semester. For the seminar,
the student shall collect the information on a specialized topic and prepare
a technical report, showing his understanding over the topic, and submit
to the department, which shall be evaluated by the Departmental
committee consisting of Head of the department, seminar supervisor and
a senior faculty member. The seminar report shall be evaluated for 50 marks.
There shall be no external examination for seminar.
142
MAJOR PROJECT
3 0/15/0 10
Out of a total of 200 marks for the project work, 100 marks shall be for
Internal Evaluation and 100 marks for the End Semester Examination. The
End Semester Examination (viva voce) shall be conducted by committee
consists of an external examiner, Head of the Dept. the supervisor of the
major project and a senior faculty of the Dept. The topics for industry
oriented mini project, seminar and major project work shall be different
from each other. The evaluation of project work shall be conducted at the
end of the IV year II Semester. Out of 100 Marks for Internal Evaluation, 50
Marks will be awarded by the Supervisor, and 50 Marks will be awarded by
the committee constituted by Head of the Dept. shall be on the basis of
two seminars given by each student on the topic of her project.
143
COMPREHENSIVE VIVA
- -/-/- 2
There shall be a Comprehensive Viva-Voce in IV year II semester. The
Comprehensive Viva-Voce will be conducted by a Committee consisting of
(i) Head of the Department (ii) two Senior Faculty members of the
Department. The Comprehensive Viva-Voce is aimed to assess the students’
understanding in various subjects he / she studied during the B.Tech course
of study. The Comprehensive Viva-Voce is valued for 100 marks by the
Committee. There are no internal marks for the Comprehensive viva-voce.
144

Eee - gn12 B Tech

Uploaded by

Copyright:

Available Formats

Eee - gn12 B Tech

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Eee - gn12 B Tech

Uploaded by

Copyright:

Available Formats

ACADEMIC REGULATIONS

G.NARAYANAMMA INSTITUTE OF TECHNOLOGY & SCIENCE

FOR THE 2012 ADMITTED BATCH ONLY Students performance in both

Class Awarded % of marks to be secured From the

3. Impersonates any other The candidate who has

4. Smuggles in the Answer book Expulsion from the examination

subject to the academic

orderly conduct of the

examinations of the subjects of

I YEAR I SEMESTER - COURSE STRUCTURE

I YEAR II SEMESTER - COURSE STRUCTURE

Code Subject L T/P/D C

II YEAR I SEMESTER - COURSE STRUCTURE

II YEAR I SEMESTER - COURSE STRUCTURE

Code Subject L T/P/D C

III YEAR I SEMESTER - COURSE STRUCTURE

III YEAR I SEMESTER - COURSE STRUCTURE

IV YEAR I SEMESTER - COURSE STRUCTURE

COMPUTER PROGRAMMING LAB

ENGINEERING PHYSICS LAB

ENGINEERING CHEMISTRY LAB

ELECTRICAL CIRCUITS LAB

DATA STRUCTURES LAB

FLUID MECHANICS AND HYDRAULIC MACHINERY

ELECTRONIC DEVICES AND CIRCUITS

FLUID MECHANICS AND HYDRAULIC MACHINERY LAB

ELECTRONIC DEVICES & CIRCUTIS LAB

SWITCHING THEORY AND LOGIC DESIGN (STLD)

ELECTRICAL MACHINES LAB - I

ELECTRICAL MEASUREMENTS LAB

MANGERAL ECONOMICS & FINANCIAL ANALYSIS

COMPUTER METHODS IN POWER SYSTEMS

ELECTRICAL MACHINES -III

ADVANCED ENGLISH COMMUNICATIONS LAB

ELECTRICAL MACHINES –II LAB

POWER SEMICONDUCTOR DRIVES

MICROPROCESSORS & MICROCONTROLLERS

RENEWABLE ENERGY SOURCES

NANOTECHNOLOGY (OPEN ELECTIVE)

OOPS THROUGH JAVA

POWER ELECTRONICS LAB

MICROPROCESSORS AND MICROCONTROLLERS LAB

SWITCH GEAR & PROTECTION

UTILIZATION OF ELECTRICAL ENERGY

POWER SYSTEM OPERATION & CONTROL

HIGH VOLTAGE ENGINEERING

DIGITAL SIGNAL PROCESSING

DIGITAL CONTROL SYSTEMS

ELECTRICAL DISTRIBUTION SYSTEMS

ELECTRICAL SIMULATION LAB

CONTROL SYSTEMS LAB

INDUSTRY ORIENTED MINI PROJECT

RELIABILITY ENGINEERING AND APPLICATIONS TO POWER SYSTEMS

ADVANCED CONTROL SYSTEMS

You might also like