Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    10 ISTIQ Acoustic Canopy

    Uploaded by

    harishamizi
    The document discusses the construction and design of acoustic canopies for housing generator sets. It describes the materials used in constructing the canopy panels using rockwool and steel. It also provides specifications for exhaust insulation and standard dimensions for canopies of different power ratings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    10 ISTIQ Acoustic Canopy

    Uploaded by

    harishamizi
    11 views2 pages
    The document discusses the construction and design of acoustic canopies for housing generator sets. It describes the materials used in constructing the canopy panels using rockwool and steel. It also provides specifications for exhaust insulation and standard dimensions for canopies of different power ratings.

    Original Description:

    Brochure for Acoustic Canopy from ISTIQ Noise Control Sdn Bhd

    Original Title

    10_ISTIQ_Acoustic_Canopy

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the construction and design of acoustic canopies for housing generator sets. It describes the materials used in constructing the canopy panels using rockwool and steel. It also provides specifications for exhaust insulation and standard dimensions for canopies of different power ratings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views2 pages

    10 ISTIQ Acoustic Canopy

    Uploaded by

    harishamizi
    The document discusses the construction and design of acoustic canopies for housing generator sets. It describes the materials used in constructing the canopy panels using rockwool and steel. It also provides specifications for exhaust insulation and standard dimensions for canopies of different power ratings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Acoustic Canopy

    Applications Notes
    ISTIQ ACOUSTIC CANOPY is designed to comply to the
    DOE regulation. The canopy are equipped with Discharge,
    Intake and Exhaust silencers. The noise level is designed to
    achieved 70 to 75 dB(A) measured at 3 meter away.
    In selecting a silencer for a canopy, a balance between
    noise reduction, pressure drop and heat rejection need
    to be calculated cautiously By using internally developed
    software, ISTIQ NOISE CONTROL can help to make the
    right choice quickly and most importantly, accurately.
    Introduction
    Canopy application for housing a generator set has gaining its popularity over the years. This is due to a portability
    of the set to be from one place to another and furthermore the cost for housing a generator set is cheaper as
    compare to a normal concrete house.

    Construction
    T internal construction of the canopy panel uses only rockwool and protected with
    The
    perforated G.I. This construction has proven to be the most cost effective in the long
    run.
    ISTIQ NOISE CONTROL has developed the modular system panel which provides great
    fflexibility at low cost. The panel are standard 65mm thickness, formed from 2.3mm
    mild steel, inert acoustic infill and galvanised perforated inner sheet steel. The finest
    quality materials and workmanship ensure that a final solution gives the best in noise
    control without affecting airflow, operation, maintenance or inspection.
    Exhaust pipe which is inside the canopy must be insulated to avoid overheating
    problem. The exhaust lagging is done by using rockwool as thermal insulation wrapped
    with aluminium jacketing.
    w
    Fuel tank is located at the base frame. The designed therefore will serve dual purposes - acting as a supporting
    base and fuel tank. The body and the base can be separated for maintenance (genset overhaul) in the future.
    Windows, exhaust penetrations, radiators and electrical cables, fitting and fixtures are all standard.

    Standard Material Specification


    a) Outer casing 2.3mm thk. M.S Plate
    b) Inner casing 0.4mm thk. Perf G.I
    c) Percentage of perforation 30% to 40%
    d) Panel thickness 65mm thk.
    e) Frame and support 2.3 - 3.2mm M.S Hollow Section
    f) Acoustic Infill 40kg/m3 density Rockwool
    g) Rockwool Thermal Conductivity 0.034 W/mK at 20 deg C
    h) Observation Panel 5mm thk transparent plexiglass
    i) Glass panel rubber 14 ‘L Normal type
    j) Lock set Slam Paddle with Lock
    k) Door hinges Lift-Off Flag Hinge
    l) Acoustic Seal Rubber c/w magnetic seal
    m) Painting One coat primer and two coats finishing

    pg. 01 Acoustic Canopy


    Standard Canopy Dimensions
    Rating
    kVA A B C D E E1 F G G1
    40 1000 2500 1350 150 700 800 450 200 1000
    56 1000 2500 1350 150 700 800 450 200 1000
    66 1000 2500 1350 150 700 800 450 200 1000
    90 300 3800 1700 150 900 1000 550 250 1200
    110 1300 3800 1700 150 900 1000 550 250 1200
    147 1300 3800 1700 150 900 1000 550 250 1200
    212 1500 4300 2000 200 900 1200 600 300 1500
    253 1500 4300 2000 200 900 1200 600 300 1500
    281 1500 4300 2000 200 900 1200 600 300 1500
    313 1500 4300 2000 200 900 1200 600 300 1500
    330 1500 4300 2300 250 1000 1200 600 300 1800
    345 1500 4300 2300 250 1000 1200 600 300 1800
    390 1500 4300 2300 250 1000 1200 600 300 1800
    416 1800 5100 2300 250 1000 1200 900 450 1800
    500 1800 5100 2300 250 1000 1200 900 450 1800
    562 1800 5100 2300 250 1000 1200 900 450 1800

    pg. 02 Acoustic Canopy

    You might also like