Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Intelis C&I EN Web

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Intelis C&I

Intelis C&I is a meter designed to measure water to light commercial and industrial customers. Ideal for
billing, it leverages ultrasonic technology to offer precise measurements at all flow rates. Agile, it proves
equally valuable in district metering, set up ahead of residential networks to monitor water losses before
individual counting. Robust alternative to traditional mechanical meters of large diameters (DN 50 -
200), Intelis C&I’s technology offers a hassle-free option for heavy water clients.

INTELIS C&I IS LOW MAINTENANCE INTELIS C&I HELPS MONITOR WATER Technology
Relying on ultrasonic technology, Intelis LOSSES » Dual beam ultrasonic technology
C&I has no moving parts in comparison Intelis C&I goes beyond billing and brings adapted to large DN sizes
to mechanical meters, thus maintaining ultrasonic precision to district metering » Free bore hole diameter for very low
a high level of accuracy over its entire applications. Ahead of residential pressure loss
lifecycle with low to no field maintenance distribution networks, Intelis helps monitor
» Insensitive to harsh water conditions,
for utilities. water flows, improving the identification of
pressure peaks and peak flows for long
water losses.
lasting accuracy performances
INTELIS C&I SIMPLIFIES DATA
COLLECTION FEATURES » Capable of installation in any position
Compatible with Itron’s Cyble* technology » Highly accurate at both high and low
Communication
through pulse outputs, Intelis C&I flow rate
connects to wireless data collection » Pulse output for volume and flow
» IP68, compatible with pit conditions
systems to provide an accurate reading of direction
» Battery lifetime up to 15 years, based
water consumption. » 2-Pulse Option Available
on environmental conditions
» Ultrasonic technology resistant to the
Approval and Standards
adhesion of dirt and contaminants
» MID, Directive 2014/32/EU,
» Flow Measurement Bi-directional /
» ROHS 2 2011/65/EU
cumulated index
» ACS certification (compliance for
potable drinking water)

* With external communication module through pulse outputs (Itron’s or 3rd party).

WATER
TECHNOLOGY DESCRIPTION

Intelis C&I is a dual beam ultrasonic meter.


A dual pair of transducers 1 is implemented in the meter body. The water velocity on
each of the two chords is measured according the difference in transit time of ultrasonic
signal principle. The integration of the dual chord velocity profile allows high accurate
measurement of the volume flown through the meter even in the larger diameters.
This technology allows a free bore hole of the meter flow section resulting in a very low
pressure loss. It allows a large turndown approved up to a ratio of R500 according the
provisions of ISO 4064/OIML R49/MID, and low starting flow, whatever the position of
installation and the water temperature.
The cast iron body 2 is epoxy coated. A built-in flow conditioner 3 is minimizing the
effect of flow disturbances upstream of the meter, that is approved U0/D0 according the
provisions of ISO4064/OIML R49/MID.
Intelis C&I DN 100
The electronics 4 dealing with signal treatment and displaying information is
encapsulated in a waterproof housing. A standard M12 connector 5 allows to output
bi-directional pulses. Intelis C&I is ranked IP68 and suitable with humid and flooded pit
environments.

5 4

Intelis C&I indicator

DISPLAY DESCRIPTION

2 3 4 5 6 7

1 Main display 10 digits 4 Battery alert 7 Flow direction


2 Error / Communication 5 Units flow and volume 8 Leak indicator
3 Air in pipe 6 Reverse flow
COMMUNICATION

Intelis C&I features a pulse output for volume and flow direction with the following characteristics:

Electrical characteristics Open collector


Pulse weight (standard) 10 liter/pulse (other setting on request)
OFF-State max Ext. Voltage 48 VDC
ON-State max. Sink current 50mA
Pulse width (ON-State) 25ms
M12 connector cabling 4 wires with direction and cable cut detection:
1- Not Used (Brown)
2- Pulse (white)
3- Ground (blue)
4- Direction (black) Male
5- Cable cut (grey or yellow/green)

Intelis C&I is compatible through pulse output and remote modules with Itron mobile and
cellular solutions Pulse Anyquest & Watermind V2.

METROLOGICAL CHARACTERISTICS
Nominal Diameter DN mm 50 65 80 100 125 150 200
inches 2 2 1/2 3 4 5 6 8
Permanent flowrate Q3 m /h
3
40 63 63 100 150 250 400
Approved Ratio R 500
Overload flowrate Q4 m3/h 50 80 80 125 200 313 500
Minimum flowrate Q1 l/h 80 126 126 200 300 500 800
Starting flowrate l/h 20 31 31 50 78 125 200
Cut-off flowrate m /h
3
60 100 100 150 250 400 600
Maximum pressure MAP bar 16
Metrological Water
mAT - MAT +0.1°C .... +50°C
Temperature Range
Sensitivity class U0/D0
Pressure loss class 0.16
Maximum Admissible Water temperature +55°C

PRESSURE LOSS

1,00

DN50 - Q3 = 40
0.10
DN65 - Q3 = 63
Pressure Loss (bar)

DN80 - Q3 = 63

DN100 - Q3 = 100

DN125 - Q3 = 150
0.01
DN150 - Q3 = 250

DN200 - Q3 = 400

0.00
1 10 100 1000
Flow-rate (m3/h)
DIMENSIONS AND WEIGHT
Nominal Diameter mm 50 65 80 100 125 150 200
DN inches 2 2 1/2 3 4 5 6 8
Total length (L) mm 200 200 225 250 250 300 350
Flanging ISO PN10/16 ISO PN10
or PN16
Height (H1) mm 77 85 95 103 115 126 190
Total Height (H) mm 182 198.5 215.5 233.5 259.5 275.5 360
Flange diameter (W) mm 165 185 200 220 240 260 340
Housing diameter (L1) mm 110 110 110 110 110 110 110
Weight (kg) mm 10 12 13 15 18 20.5 26

Join us in creating a more resourceful world. ITRON WATER METERING


To learn more visit itron.com 9, rue Ampère
While Itron strives to make the content of its marketing materials as timely and accurate as possible, Itron makes no claims, promises,
71031 Mâcon cedex
or guarantees about the accuracy, completeness, or adequacy of, and expressly disclaims liability for errors and omissions in, such France
materials. No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties of non-infringement of third
party rights, title, merchantability, and fitness for a particular purpose, is given with respect to the content of these marketing materials. Phone: +33 3 85 29 39 00
© Copyright 2020 Itron. All rights reserved. WA-0116.4-EN-03.20
Fax: +33 3 85 29 38 58

You might also like