7715 Controller
7715 Controller
7715 Controller
TECHNICAL SPECIFICATIONS
• DVB Search - Searches directly for any DVB-S2X carrier on the target satellite and peaks on it.
• DVB Search, Opposite Polarity – Searches for DVB-S or DVB-S2 or S2X carrier in the opposite polarity on target satellite, then
rotates polarization axes and enables transmitter if modem signal attained.
• DVB Search, Reference Satellite with modem - Searches for a DVB-S or DVB-S2 or S2X carrier on ANY configured reference
satellite then moves to the target satellite and peaks on modem signal.
• DVB Search, Reference Satellite without modem - Peaks on a reference satellite then uses precise pointing mechanism to locate
the target satellite, even when no modem RF or beacon signal is available to peak on.
• RF Automatic Search – The system will stop and search for modem signal when it senses an increase in RF energy received
through the DVB tuner as it passes by the target satellite. If the modem signal is found, the system will begin the peak process.
• RF Override Search – The user specifies an RF Threshold such that the system stops when it reaches an area above the
threshold and looks for modem signal to peak on.
• Beacon Receiver – The iNetVu® Controller works seamlessly with the optional iNetVu® Beacon Receiver by searching for a
specified beacon frequency and then peaks on it (search gain level can be adjusted).
• Can be operated from a PC application using the USB port or network port or WiFi
• Has built in web interface that can be operated remotely or locally over a network connection
• Can be completely configured from the front panel with a password protected configuration menu
• Protects the platform and its components from damage, using current levels and sensor readings. It includes motion and
movement protection as well
• Provides automatic re-peaking if signal degradation occurs
• Works correctly even when deployed while on an incline (in any direction) of up to 15°
• Can search for both DVB-S, DVB-S2/ACM or DVB-S2X carriers
• Supports full automatic and manual control of the iNetVu® Platform
• Allows the users to select from multiple speed levels for both azimuth and elevation movements
• Allows the system to operate unattended in remote locations
• It is able to upload the recorded log information (Maximum of 12 hours) from the controller to the PC for troubleshooting
• Supports full tracking of Inclined Orbit satellites by both signal strength and timed function
• Is capable of powering the LNB with 13-19 Volts, selectable in software
• Provides the option of saving the settings to a configuration file that can be used to configure additional controllers with the
same configuration parameters
• Supports both GPS and GLONASS Satellite Navigation Systems
• Supports Electronic Flux Gate Compass for increased speed of acquisition
• Designed and manufactured to the highest standards of quality and reliability by C-COM
• Only works with iNetVu® Mobile antenna platforms which are equipped with 7720/7725 on board module