MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

VIVEKANAND EDUCATION SOCIETY’s

POLYTECHNIC

MICRO PROJECT
Academic year: 2021-22

Fabrication utility job.

Program:Mechanical Engg
Programcode: ME2I
Course: Mechanical Engineering Workshop (MEW)
Course code:22010
 MAHARASHTRA STATE
BOARD OF TECHNICAL EDUCATION
Certificate
This is to certify that Mr. Gaurav, Usaid,Raj,Sairaj,Shivansh,Rohit, Siddhant
Roll No.49-55 of Second Semester of Diploma in Mechanical engineering of Institute, V.E.S. POLYTECHNIC
(Code: 0004) has Completed the Micro Projectsatisfactorily in Subject- Mechanical Engineering
Workshop

for the academic year 2021-2022 as prescribed in thecurriculum.

Place: Mumbai EnrollmentNo:2100040384-90

Date: 17/05/2022 Exam Seat No:-103062-68

SubjectTeacher Head oftheDepartment Principal

Seal of
Institution
Group Details:

Sr. Name of group members Roll Enrollment No. Seat No.

No. No.

1 Gaurav Yadav 49 2100040384 103062

2 Usaid Siddiqui 50 2100040385 103063

3 Raj Chavan 51 2100040386 103064

4 Sairaj Kadam 52 2100040387 103065

5 Shivansh Mishra 53 2100040388 103066

6 Rohit Sonawane 54 2100040389 103067

7 Siddhant Ghate 55 2100040390 103068

Name of Guide: Mr. Pranit Nigade

 INDEX
Academicyear:2021-22 Name of the faculty: Mr.Pranit Nigade

Programcode:ME2I
Course & Coursecode:Engineering Drawing (22207)

RollNo:49-55 EnrollmentNo:2100040384-90

Semester:2
Name of theCandidate: Gaurav, Usaid, Raj, Sairaj, Shivansh, Rohit, Siddhant

SR.NO. CONTENT PAGE NO.

Micro-Project Proposal 4-7
a) Aims/Benefits
b) Course OutcomesAddressed
1 c) ProposedMethodology
d) ActionPlan
e) ResourcesRequired
7
2 Rationale

7
3 Course Outcomes Achieved

7
4 Literature Review

8
5 Actual Methodology Followed

8
6 Actual Resources Used

9
7 Output of the project

9
8 Skills Developed / learning outcome

Application of this Micro-Project 10

9
11
10 Teacher Evaluation Sheet
 Annexure - I

Micro - Project Proposal

a. Aim of the Micro-Project:

To understand and learn Fabrication utility job.

b. Course OutcomesAddressed:
Fabrication utility job is used to make Grills, Windows,etc.

c. Proposed Methodology:

Our group decided on the topic for the subject. The topic name was Fabrication
utility job. There are various types of Fabrication utility job:- Window,Grills,etc. Then
we prepared the report based on fabrication utility job. The teammates referred to the
library books, various published textbooks based on the subject. For extra reference we
used go google.
 d. ActionPlan:

Planned Planned Name of

Sr. Wee Start date Finish Responsible
Activity to be performed
no. k date Team
Members

1 1st Discussion and finalization of topic 14/2 21/2 All Members

2 2nd Preparation and submission of Project 21/2 28/2 All Members

Proposal

3 4th Literature Review and collection of data 7/3 28/3 All Members

4 6th Circuit Implementation 28/3 11/4 All Members

5 9th Execution of Circuit 11/4 18/4 All Members

6 11th Compilation of Report 18/4 5/5 All Members

7 12th Actual Presentation & Final submission 5/5 17/5 All Members
of Micro Project

e. ResourcesRequired:

Sr. Name of Specification Qty

No resource/Materia s
l
Chart Paper A2 Size 1
1.
Pens,Markers. Any Colour 1
2.

Name of Team Members with Roll Nos.

Roll no. Name.

49 Gaurav Yadav
59 Usaid Siddiqui
51 Raj Chavan
52 Sairaj Kadam
53 Shivansh Mishra
54 Rohit Sonawane
55 Siddhant Ghate

Signature of faculty
Microproject
Report.

1.0 Rationale : To understand and learn the Fabrication utility

job.

2.0 Aim/Benefits of the micro project:

To understand the Fabrication utility job.
To learn Fabrication utility job.

3.0 Course outcomes achieved:

Our group decided on the topic for the subject. The topic name was Fabrication
utility job. There are various types of Fabrication utility job:- Window,Grills,etc. Then we
prepared the report based on fabrication utility job. The teammates referred to the library
books, various published textbooks based on the subject. For extra reference we used go
google.
 4.0 LiteratureReview

Metal fabricators prepare, weld, and fabricate metal structures and components.
They mainly work in manufacturing plants or at construction sites using a variety of
tools to construct metal-based assembly components. Completely free trial, no card
required.

5.0Actual methodology followed:

Our group decided on the topic for the subject. The topic name was Fabrication utility job.
There are various types of Fabrication utility job:- Window,Grills,etc. Then we prepared the
report based on fabrication utility job. The teammates referred to the library books, various
published textbooks based on the subject. For extra reference we used go google.
Step 1) Formation of group & selection of topic

Step 2) Submission of proposed plan

Step 3) Preparation of report

Step 4) Final evaluation of report

Step 5) Presentation : report

Step 6) Submission of Final Report

 6.0 Actual resources used

Sr. Name of Specifications Qty

No resource/Material

1. Chart Paper Yellow 1

2. Pens,Markers. All Colours 1

7.0 Output of the micro project:

8.0 Skills developed/Learning outcome:

The following skills were developed-

Designing: Designing of micro projects with minimum required resources and at low cost.

Teamwork: Learned to work in a team and boost individual confidence.

Time Management: Timely completion of micro project as scheduled.

Data Analysis: Interpretation of data: drawing and analysis of graphs, laboratory calculations,
etc.

Problem-solving: Develop good problem-solving habits.

Technical writing: Preparing a report of the proposed plan and final report.

Presentation: Giving a working model/ Chart presentation of the micro project.

9.0 Application of micro project

The chart can be used to explain the types and uses of welded symbols.

Signature of faculty
 Annexure – III

Suggested Rubric for Assessment of Micro-Project

S. Characteristic to Poor Average Good Excellent

No. be assessed ( Marks 1 - 3 ) ( Marks 4 - 5 ) ( Marks 6 - 8 ) ( Marks 9- 10 )
Relevance to the Relate to very Take care of at-least Take care of more
1 Related to some LOs
course few LOs one CO than one CO
Not more than
Literature Survey two sources At-least 5 relevant
At –least 7 relevant About 10 relevant
2 /information (primaryand sources, at least 2
sources, most latest sources, most latest
collection secondary), very latest
old reference
Completion of the
Completed less Completed more than
3 Target as per Completed 50 to 60% Completed 60 to 80%
than 50% 80 %
project proposal
Enough data collected
Sufficient and by sufficient and
Sample Size Sufficient and
appropriate sample, appropriate sample
small, data appropriate sample,
enough data generated size. Proper
Analysis of Data neither organized enough data generated
4 but not organized and inferences drawn by
and representation nor presented which is organized and
not presented well. No organising and
well presented well but poor
or poor inferences presenting data
inferences drawn
drawn through tables,charts
and graphs.
Well
Just Well
assembled/fabricated
assembled/fabricated assembled/fabricated
with proper
and parts are not with proper functioning
functioning parts. In
Quality of Incomplete functioning well. Not parts. In proper shape,
proper shape, within
5 Prototype/Model fabrication/assem in proper shape, within tolerance
tolerance dimensions
bly. dimensions beyond dimensions and good
and good
tolerance limit. finish/appearance. But
finish/appearance.
Appearance/finish is no creativity in design
Creativity in design
shabby. and use of material
and use ofmaterial
Very short, poor Nearly sufficient and
quality sketches, correct details about Very detailed, correct,
Detailed, correct and
Details about methods, material, clear description of
clear description of
methods, precautions and methods, materials,
methods, materials,
6 Report Preparation material, conclusion. but clarity precautions and
precautions and
precaution and is not there in conclusions. Enough
Conclusions. Sufficient
conclusions presentation. But not tables, charts and
Graphic Description.
omitted, some enough graphic sketches
details are wrong description.
Major
information is Includes major Includes major Well organized,
not included, information but not information and well includes major
7 Presentation
information is well organized and organized but not information ,well
not well not presented well presented well presented
organized .

Could not reply Replied to

Replied properly to
to considerable considerable number Replied most of the
8 Viva considerable number of
number of of questions but not questions properly
question.
question. very properly
 Annexure – IV

Teacher Evaluation Sheet

Name ofStudent: Gaurav,Usaid,Raj, Sairaj, Shivansh, Rohit, Siddhant Enrollment No:2100040384-90

Name ofProgram:ME Semester:2
CourseTitle: Mechanical Engineering Workshop Course Code: 22010

Title of the Micro-Project: Fabrication utility job.

Course Outcomes Achieved :Fabrication utility job is used to make Grills, Windows,etc.

Evaluation as per Suggested Rubric for Assessment of Micro Project

Sr. Characteristic to
Poor Average Good Excellent Sub total
No. be assessed ( Marks 1-3 ) (Marks 4-5 ) (Marks 6-8) ( Marks9-10)

Process and product Assessment (6m)

Relevance to the
1
course

Literature Survey /
2 Information
Collection

Completion of the
3 Target as per
project proposal

Analysis of Data
4
and representation

Quality of
5
Prototype/Model

6 Report Preparation

Individual Presentation/Viva (4 marks)

7 Presentation

8 Viva
 Micro-Project Evaluation Sheet
Part A -Processand
Part B -individual Total Marks
Roll No. ame
N product Assessment
Presentation/Viva (4m) 10
(6m)
49 Gaurav Yadav
50 Usaid Siddiqui
51 Raj Chavan
52 Sairaj Kadam

53 Shivansh Mishra

54 Rohit Sonawane

55 Siddhant Ghate

Note:
Every course teacher is expected to assign marks for group evolution in first 3 columns &
individual evaluation in 4TH columns for each group of students as per rubrics.

Comments/Suggestions about teamwork/leadership/interpersonal communication (if any)

………………………………………………………………………………………………
……………………………………………………………………………………………..
……………………………………………………………………………………………..
……………………………………………………………………………………………..

Any Other Comment:

……………………………………………………………………………………………
……………………………………………………………………………………………
……………………………………………………………………………………………
………………………………………………………………………………………………

Name and designation of the Faculty Member: Mr. Pranit Nigade.

Signature