2019 Master Catalog

SELECTION GUIDE
SAE HYDRAULIC 4-BOLT AND

SPLIT FLANGE FITTINGS
IN CARBON STEEL AND STAINLESS STEEL
SAE HYDRAULIC 4 BOLT AND SPLIT FLANGED FITTINGS

QUICK SELECTION GUIDE
866-FLANGES | 513.527.4444 | Fax 513.527.4449

sales@anchorfluidpower.com | anchorfluidpower.com
Ordering System
Our basic part numbering system is easy to use. The explanation of our part numbering system is detailed
below. The series number provides the greatest amount of information pertaining to the flange product.
The port size and pad size simply refer to size only, with all sizes based on 1/16 of an inch.
W4 - 20 - 24
SERIES NUMBER
• CODE 61
Port Size Pad Size
• Flat Socket Weld
1.25” 1.50”
• O-Ring
• Pipe
NOTE #1 - All items available with mounting kit by simply adding suffix letter “U” to the W series and
the letter “O” to our split flange series. Example: W4-20-24U & 16SFXO would include all appropriate
hardware.
NOTE #2 - All items available in stainless steel material by simply adding the suffix letters “SS”.
Stainless steel flanges may vary in shape and/or design from carbon steel flanges. Please consult
factory for dimensions.
CODE 61 METRIC CODE 62 METRIC

MOUNTING OPTION MOUNTING OPTION
PAD METRIC TAPPED PAD METRIC TAPPED
SIZE BOLT HOLES SIZE BOLT HOLES
8 M8 X 1.25 8 M8 X 1.25
12 M10 X 1.50 12 M10 X 1.50

16 M12 X 1.75
16 M10 X 1.50
20 M12 X 1.75
20 M10 X 1.50
24 M16 X 2.00
24 M12 X 1.75
32 M20 X 2.50
32 M12 X 1.75
40 M24 X 3.00
40 M12 X 1.75
48 M30 X 3.50
48 M16 X 2.00
56 M16 X 2.00 Due to the infinite number of flange combinations,
64 M16 X 2.00 materials and finishes available, we make no
attempt to catalog all of the items we stock or have
We offer the quality that you have come to the capability to manufacture. Instead, we catalog
expect from Anchor Fluid Power with prompt only our most popular standard flanges.
delivery on these special requirements.
Please contact us for your special requirements.
866-FLANGES | 513.527.4444 | Fax 513.527.4449

DASH NOMINAL
SIZE OF PORT IN FLANGE
THREAD OR SOCKET SPECIFICATION

W-Series
NUMBER SIZE
NPTF SAE ST. THD. PIPE SOC. TUBE SOC.
-04 1/4 1/4-18 7/16-20 .565 .252
-06 3/8 3/8-18 9/16-18 .687 .377
-08 1/2 1/2-14 3/4-16 .855 .502
-12 3/4 3/4-14 1 1/16-12 1.062 .752
-16 1 1-11 1/2 1 5/16-12 1.328 1.002
-20 1 1/4 1 1/4-11 1/2 1 5/8-12 1.672 1.252
-24 1 1/2 1 1/2-11 1/2 1 7/8-12 1.922 1.502
-32 2 2-11 1/2 2 1/2-12 2.406 2.002
-40 2 1/2 2 1/2-8 3-12 2.906 2.502
-48 3 3-8 3 1/2-12 3.547 3.002
-56 3 1/2 3 1/2-8 NA 4.047 3.502
-64 4 4-8 4 1/2-12 4.578 4.002
-80 5 NA NA 5.641 5.002 Note- All dimensions are in inches.

NPTF THREAD SAE STRAIGHT THREAD FLAT SOCKET WELD PIPE
PRESSURE PRESSURE PRESSURE

O-RING RATING FLAT FACE O-RING RATING FLAT FACE O-RING RATING FLAT FACE
W43 CODE 61 W104 W46 CODE 61 W106 W4 CODE 61 W61

W72 CODE 61 W91
DEEP SOCKET WELD PIPE DEEP SOCKET WELD TUBE FLAT SOCKET WELD TUBE


W71 CODE 61 W90
BUTT WELD CODE 61 BUTT WELD CODE 62 BLANKING

W35 SCH.40 W34 W28 SCH.80 W26 W36 CODE 61 W37

W24 SCH.80 W23 W30 SCH.160 W29 W38 CODE 62 W39
W27 SCH.160 W25 W33 SCH.XXS W32
W-Series
BASIC FLANGE PAD
CODE 61 CODE 62
DASH NOMINAL
BOLT CENTERS BOLT CENTERS
NUMBER SIZE THREAD THREAD
DIM C DIM D DIM C DIM D
-08 1/2 .688 1.500 5/16-18 .718 1.594 5/16-18
-12 3/4 .875 1.875 3/8-16 .937 2.000 3/8-16
-16 1 1.031 2.062 3/8-16 1.093 2.250 7/16-14
-20 1 1/4 1.188 2.312 7/16-14 1.250 2.625 1/2-13
-24 1 1/2 1.406 2.750 1/2-13 1.437 3.125 5/8-11
-32 2 1.688 3.062 1/2-13 1.750 3.812 3/4-10
-40 2 1/2 2.000 3.500 1/2-13 2.311 4.874 7/8-9
-48 3 2.438 4.188 5/8-11 2.811 6.000 1 1/8-7
-56 3 1/2 2.750 4.750 5/8-11 NA NA NA
-64 4 3.062 5.125 5/8-11 NA NA NA
-80 5 3.625 6.000 5/8-11 NA NA NA
SOCKET WELD PIPE ELBOW SOCKET WELD TUBE ELBOW GAUGE PORT SPACER BLOCK
PRESSURE PRESSURE
O-RING RATING FLAT FACE O-RING RATING FLAT FACE O-RING PRESSURE RATING
W176 CODE 61 W169 W172 CODE 61 W177 AS-GP CODE 61

W186 CODE 62 W189 W182 CODE 62 W187 ASX-GP CODE 62
Flanges include both 1/4” NPTF & #4 SAE ports.
NPTF THREAD ELBOW SAE STRAIGHT THREAD ELBOW SADDLE WELD
PRESSURE PRESSURE
O-RING RATING FLAT FACE O-RING RATING FLAT FACE O-RING PIPE/TUBE FLAT FACE
W168 CODE 61 W170 W164 CODE 61 W165 W8 PIPE W7

W188 CODE 62 W180 W184 CODE 62 W185 W87 TUBE W69
SQUARE PATTERN SOCKET WELD SQUARE PATTERN NPTF THREAD TEE JUNCTION BLOCK

W66 3000 PSI W76 W65 3000 PSI W75 W17 CODE 61 W16
W56 6000 PSI W57 W19 CODE 62 W18
SPLIT & CAPTIVE FLANGES
SAE J518 SPLIT FLANGE SAE J518 CAPTIVE FLANGE CAT STYLE SPLIT FLANGE
PRESSURE DRILLED PRESSURE THREAD

HALF ONLY RATING KIT FORM BOLT HOLES RATING BOLT HOLES HALF ONLY KIT FORM
SF-2 CODE 61 *SFO SFW CODE 61 SFTW PTX-2 *PTXO

SFX-2 CODE 62 *SFXO SFXW CODE 62 SFXTW NO O-RING INCLUDED IN THIS SERIES KIT
* When ordering this part # you will receive the kit: (2) split flange halves, (4) hex head bolts and flat washers, and (1) Buna N O-ring.

FLANGED HEAD FITTINGS
TUBE FLANGE HEAD FITTING FLANGE PLUG SOCKET WELD TO FLANGE HEAD

O-RING RATING FLAT FACE O-RING RATING FLAT FACE PIPE RATING TUBE
T-SF CODE 61 T-SFN FOP CODE 61 FP P-WSF CODE 61 T-WSF

T-SFX CODE 62 T-SFXN FOPX CODE 62 FPX W53 CODE 62 W54
BUTT WELD TO FLANGE HEAD
O-RING PRESSURE RATING FLAT FACE
P-BWSF CODE 61 P-BWSFN

P-BWSFX CODE 62 P-BWSFXN
Available for the following schedules of pipe:

Code 61 - 40, 80, 160 Code 62 - 80, 160, XXS
FLANGE PRODUCTS
CONNECTOR BLOCKS SHIPPING PLATES (0 PSI) MALE THREAD
PRESSURE
FLAT FACE PRESSURE RATING O-RING & FLAT FACE PRESSURE RATING ORFS RATING JIC
ACB CODE 61 SP CODE 61 W304 CODE 61 W300

ACBX CODE 62 SPX CODE 62 W604 CODE 62 W600
OFF-THE-SHELF AVAILABILITY.
ENGINEERED FOR PERFORMANCE.
Anchor’s broad range of hydraulic flange configurations

provides design engineers and shop assembly personnel with
total flexibility in the plumbing of hydraulic systems. Our wide
variety of standard configurations are available OFF-THE-
SHELF to meet today’s reduced lead time requirements.
Anchor’s commitment to quality continues to grow while

serving today’s global market. State-of-the-art equipment,
together with full implementation of SPC manufacturing
procedures, ensures the highest, most consistent quality
throughout the entire product line.
Competitive pricing has long been a trademark of Anchor Fluid

Power. This commitment to value continues on our complete
line of hydraulic flanges. For our detailed catalog containing
specifications on more than 1,200 sizes and configurations
call, fax, or visit us on the web at www.anchorfluidpower.com.
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
& HOSES 2
FLOW CONTROL
NEEDLE &
CHECK VALVES 6

HYDRAULIC

BALL VALVES 18
QUICK
COUPLINGS 54
WELD
COUPLINGS 62
SUCTION
& RETURN 72
FLANGES 80
TEST POINT ADAPTERS
TEST POINT
ADAPTERS
& HOSES
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT ADAPTERS
TEST POINT
ADAPTERS
Piston Test Points 4
VALVES
Direct Pressure Gauge Adapter 4
INLINE
Hose to Hose Connector 5
Test Hoses 5
Test Point Kit 5
VALVES
BALL
COUPLINGS
QUICK
COUPLINGS
WELD
TEST POINT ADAPTER SPECIFICATIONS
Media Compatibility
Hydraulic oils and mineral based fluids. Check compatibility with the seal material.
AND RETURN
SUCTION
Materials
Metal components: Zinc nickel (CrVI free) plated carbon steel
Natural finish stainless steel
Seals: Buna -20˚C to +100˚C (-4˚F to +212˚F)
Viton -20˚C to +200˚C (-4˚F to +392˚F)
Hose: Polyamide -35˚C to +100˚C (-31˚F to +212˚F)
FLANGES
C/S
Pressure
Maximum working pressure of test point fittings is 9000 PSI based upon a 4:1
safety factor, connection under pressure up to 5800 PSI. For adapters connection
to test point components, please refer to the corresponding adapter manufacturer.
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

3
TEST POINT ADAPTERS
TPPM SERIES M16 x 2 Piston Test Points

CARBON STEEL – ZINC NICKEL PLATED, BUNA
SEAL
PART NUMBER MAX PSI MATERIAL H SW THREAD G
MATERIAL
TPPM1620CBN1/8 9000 ZINC NICKEL PLATED C/S BUNA 1.42 0.67 1/8 NPT
TPPM1620CBS#4 9000 ZINC NICKEL PLATED C/S BUNA 1.50 0.67 7/16-20 UNF
TPPM1620CBS#6 9000 ZINC NICKEL PLATED C/S BUNA 1.50 0.75 9/16-18 UNF
TPPM1620CBM10 9000 ZINC NICKEL PLATED C/S BUNA 1.50 0.67 M10 X 1.25
TPPM1620CBB#2 9000 ZINC NICKEL PLATED C/S BUNA 1.54 0.67 ISO 228-G 1/8
CARBON STEEL – ZINC NICKEL PLATED, VITON

SEAL
MATERIAL
TPPM1620CVN1/8 9000 ZINC NICKEL PLATED C/S VITON 1.42 0.67 1/8 NPT
TPPM1620CVN1/4 9000 ZINC NICKEL PLATED C/S VITON 1.38 0.67 1/4 NPT
TPPM1620CVS#4 9000 ZINC NICKEL PLATED C/S VITON 1.50 0.67 7/16-20 UNF
TPPM1620CVS#6 9000 ZINC NICKEL PLATED C/S VITON 1.50 0.75 9/16-18 UNF
TPPM1620CVB#4 9000 ZINC NICKEL PLATED C/S VITON 1.46 0.75 ISO 228-G 1/4
STAINLESS STEEL, VITON

SEAL
MATERIAL
TPPM1620SVN1/4 9000 S/S VITON 1.38 0.67 1/4 NPT
TPPM1620SVS#4 9000 S/S VITON 1.50 0.67 7/16-20 UNF
Additional connection types available upon request.
PGAM SERIES M16 x 2 Direct Pressure

Gauge Adapter
CARBON STEEL – ZINC NICKEL PLATED, BUNA
SEAL
PART NUMBER MATERIAL SW H1 H2 THREAD G1 THREAD G2
MATERIAL
PGAM1620CBB#4 ZINC NICKEL PLATED C/S BUNA 0.75 1.06 2.13 ISO 228-G 1/4 M16 X 2
PGAM1620CBN1/4 ZINC NICKEL PLATED C/S BUNA 0.75 - 2.09 1/4 NPT M16 X 2
PGAM1620CBS#4 ZINC NICKEL PLATED C/S BUNA 0.87 - 2.10 7/16-20 UNF M16 X 2
CARBON STEEL – ZINC NICKEL PLATED, VITON

SEAL
MATERIAL
PGAM1620CVN1/4 ZINC NICKEL PLATED C/S VITON 0.75 - 2.09 1/4 NPT M16 X 2
PGAM1620CVS#4 ZINC NICKEL PLATED C/S VITON 0.87 - 2.10 7/16-20 UNF M16 X 2
STAINLESS STEEL, VITON

SEAL
MATERIAL
PGAM1620SVN1/4 S/S VITON 0.75 - 2.09 1/4 NPT M16 X 2
PGAM1620SVS#4 S/S VITON 0.87 - 2.10 7/16-20 UNF M16 X 2
Additional connection types available upon request.
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT ADAPTERS
TEST POINT
ADAPTERS
HCM SERIES Hose to Hose Connector
CARBON STEEL
PART NUMBER THREAD G1 THREAD G2 L SW
VALVES
INLINE
HCM1620C M16 X 2 M16 X 2 1.65 0.67
VALVES
BALL
THM SERIES M16 x 2 Test Hoses
CARBON STEEL, ZINC NICKEL PLATED
PART NUMBER MATERIAL L THREAD G1 THREAD G2
(INCHES)
COUPLINGS
THM1620C-8 ZINC NICKEL PLATED C/S 8 M16 X 2 M16 X 2
Maximum Working Pressure:
QUICK
Up to 9000 PSI THM1620C-16 ZINC NICKEL PLATED C/S 16 M16 X 2 M16 X 2
Pressure/Temperature Factor: THM1620C-31 ZINC NICKEL PLATED C/S 31 M16 X 2 M16 X 2
100% at 20˚C THM1620C-39 ZINC NICKEL PLATED C/S 39 M16 X 2 M16 X 2
95% at 40˚C
STAINLESS STEEL
90% at 60˚C L
PART NUMBER MATERIAL THREAD G1 THREAD G2
80% at 80˚C (INCHES)
COUPLINGS
THM1620S-16 S/S 16 M16 X 2 M16 X 2
70% at 100˚C
WELD
THM1620S-31 S/S 31 M16 X 2 M16 X 2
Additional hose lengths and connection types

available upon request.
Test Point Kit TPK-1001
AND RETURN
SUCTION
Includes:
(1) ¼” NPT, 3000 PSI pressure gauge
(1) ¼” NPT, 10000 PSI pressure gauge
(1) 79” test hose
(1) 12” test hose
(1) M16 X M16 hose to hose adapter
FLANGES
(1) ¼” NPT Direct Pressure Gauge Adapter

C/S
(1) 7/16-20 UNF SAE thread Direct Pressure Gauge Adapter

(2) ¼” NPT test point – TPPM1620CBN1/4
(1) 7/16-20 UNF SAE test point – TPPM1620CBS#4
(1) 9/16-18 UNF SAE test point – TPPM1620CBS#6
*Image not shown with all components listed.
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

5
INLINE VALVES
FLOW CONTROL
NEEDLE &
CHECK VALVES
866-FLANGES | 513.527.4444 | Fax 513.527.4449

INLINE VALVES
TEST POINT
ADAPTERS
Carbon Steel Check Valves 8
VALVES
Stainless Steel Check Valves 10
INLINE
Carbon Steel Flow Control Valves 12
Carbon Steel Needle Valves 14
Carbon Steel Gauge Shutoff Valves 16
VALVES
BALL
COUPLINGS
QUICK
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
3
866-FLANGES | 513.527.4444 | Fax 513.527.4449
7
INLINE VALVES
Check Valves - Carbon Steel
• NPTF & SAE Connections

• Carbon Steel with Zinc Chromate Plating (RoHS Compliant)
• Available in 7 PSI & 65 PSI Spring Cracking Pressures
• Metal to Metal Seat
• Hardened Poppet
• Temperature Range -4ºF to +176ºF
NPTF CHECK VALVES SAE CHECK VALVES

A B C MAX PSI MAX FLOW GPM A B C MAX PSI MAX FLOW GPM
1/4" .2.17 .75 5700 4 #4 2.17 0.75 5700 4

3/8” 2.68 .95 5700 8 #6 2.28 0.75 5700 8
1/2” 2.95 1.06 5700 13 #8 2.72 .95 5700 13
3/4” 3.48 1.38 5700 23 #12 3.48 1.38 5700 23
1” 4.33 1.61 5000 40 #16 4.33 1.61 5000 40
1¼” 4.72 2.17 5000 50 #20 4.72 2.17 5000 50
1½” 5.43 2.56 5000 80 #24 5.43 2.56 5000 80
2” 5.43 2.95 4500 110 #32 5.43 2.95 4500 110
866-FLANGES | 513.527.4444 | Fax 513.527.4449

INLINE VALVES
TEST POINT
ADAPTERS
Check Valves - Carbon Steel
Model Code Breakdown
VALVES
INLINE
C N 1/2 - 1 - 7
VALVE SERIES
CRACKING PRESSURE
THREAD TYPE
7 7 PSI
VALVES
N NPTF Pipe Thread
BALL
65 65 PSI
S# SAE Straight Thread
MATERIAL
THREAD SIZE
1 Carbon Steel
Example N1/2
COUPLINGS
S#8
QUICK
COUPLINGS
∆P-PSI
∆P-PSI
WELD
Flow (GPM) Flow (GPM)
AND RETURN
SUCTION
∆P-PSI
∆P-PSI
FLANGES
C/S
Flow (GPM) Flow (GPM)

FLANGES
S/S
9
866-FLANGES | 513.527.4444 | Fax 513.527.4449
9
INLINE VALVES
Check Valves - Stainless Steel

• 316L stainless steel
• Metal to Metal Seat
NPTF CHECK VALVES SAE CHECK VALVES

A B C MAX PSI MAX FLOW GPM A B C MAX PSI MAX FLOW GPM
1/4" 2.28 0.75 5800 4 #4 2.17 0.75 5800 4

3/8” 2.72 0.95 5800 8 #6 2.28 0.95 5800 8
1/2” 2.95 1.06 5800 13 #8 2.71 0.95 5800 13
3/4” 3.48 1.38 5800 24 #12 3.48 1.38 5800 24
1” 4.33 1.61 5075 40 #16 4.33 1.61 5075 40
1¼” 4.72 2.17 5075 53 #20 4.72 2.17 5075 53
1½” 5.43 2.36 5075 80 #24 5.43 2.36 5075 80
2” 5.43 2.95 5075 114 #32 5.43 2.95 5075 114
866-FLANGES | 513.527.4444 | Fax 513.527.4449

INLINE VALVES
TEST POINT
ADAPTERS
Check Valves - Stainless Steel
VALVES
INLINE
C N 1/2 - 2 - 7
VALVE SERIES
CRACKING PRESSURE
THREAD TYPE
7 7 PSI
VALVES
N NPTF Pipe Thread
BALL
MATERIAL
THREAD SIZE
2 Stainless Steel
Example N1/2
COUPLINGS
S#8
QUICK
PRESSURE DROPS
NPTF NPTF
[PSI] [bar]
1 2 1 2
[PSI] [bar]
90 6 90 6
COUPLINGS
75 5 75 5
WELD
120
60 4 60 4
140 380 340
112
45 3 180 45 3
114 200
30 2 30 2
100
15 1 15 1
0 0 [l/min] 0 0 [l/min]
AND RETURN
0 10 20 30 40 50 60 70 80 90 0 30 60 90 120 150 180 210 240 270 300 330 360 390 420 450
[USgpm] [USgpm]
SUCTION
0 2,5 5 7,5 10 12,5 15 17,5 20 22,5 0 15 30 45 60 75 90 105
SAE SAE
[PSI] [bar]
1 2 1 2
[PSI] [bar]
90 6 90 6
75 5 75 5
SAE8
60 4 60 4
FLANGES
SAE4 SAE6 SAE12 SAE24

C/S
45 3 45 3
SAE20 SAE32
30 2 30 2 SAE16
15 1 15 1
0 0 [l/min] 0 0 [l/min]
0 10 20 30 40 50 60 70 80 90 0 30 60 90 120 150 180 210 240 270 300 330 360 390 420 450
[USgpm] [USgpm]
0 2,5 5 7,5 10 12,5 15 17,5 20 22,5 0 15 30 45 60 75 90 105
FLANGES
S/S
11
866-FLANGES | 513.527.4444 | Fax 513.527.4449
11
INLINE VALVES
Flow Control Valves - Carbon Steel

• Set Screw Allows Knob to be Locked into Position
• Graduated Knob & Spindle for Accurate Flow Control
• 7 PSI Standard Spring Setting
• Buna O-Ring / PTFE Stem Packing
• These valves are for control of flow only. Not to be used as
isolation or shut-off valves
2 1
FLOW CONTROL VALVES

A
B D E F MAX PSI MAX FLOW GPM WEIGHT (LB)
NPTF SAE
1/4 #4 2.60 1.18 2.67 0.98 5700 4 0.83

3/8 #6 3.00 1.18 2.67 0.98 5700 8 0.86
1/2 #8 3.58 1.29 2.79 1.18 5700 13 1.4
3/4 #12 4.43 1.65 3.70 1.57 5700 21 3.0
1 #16 5.55 1.65 3.93 1.77 5700 40 4.2
1-1/4 #20 6.10 2.08 4.78 2.16 5000 50 7.0
1-1/2 #24 6.61 2.08 5.17 2.55 5000 80 10.0
866-FLANGES | 513.527.4444 | Fax 513.527.4449

INLINE VALVES
TEST POINT
ADAPTERS
Flow Control Valves - Carbon Steel
VALVES
INLINE
F N 1/2 - 1
Valve Series Material
Thread Type 1 Carbon Steel
N NPTF Pipe Thread
VALVES
BALL
Thread Size
Example N1/2
S#8
COUPLINGS
NPTF SAE
QUICK
PSI bar 2 1 PSI bar 1 2 PSI bar 2 1 PSI bar 1 2
120 8 60 4 120 8 60 4
90 6 45 3 90 6 45 3
0
4
4
E2
E2
11
60 4 30 2 60 4 30 2
SA
SA
2 4 0
2 4 11 E2 E2
11 11 SA SA
30 2 15 1 30 2 15 1
COUPLINGS
WELD
0 0 0 0
60 120 180 240 300 l/min 60 120 180 240 300 l/min 60 120 180 240 300 l/min 60 120 180 240 300 l/min
15 30 45 60 75 USgpm 15 30 45 60 75 USgpm 15 30 45 60 75 USgpm 15 30 45 60 75 USgpm
120 8 60 4 120 8 60 4
90 6 45 3 90 6 45 3
6
60 4 30 2 00 60 4 30 2 E1
AND RETURN
1 6 2 SA
2
0 E1 E1
E1
10 0
0
34 SA SA
SA
34
SUCTION
30 2 15 1 30 2 15 1
0 0 0 0
30 60 90 120 150 l/min 30 60 90 120 150 l/min 30 60 90 120 150 l/min 30 60 90 120 150 l/min
7.5 15 22.5 30 37.5 USgpm 7.51 5 22.53 0 37.5 USgpm 7.5 15 22.5 30 37.5 USgpm 7.5 15 22.53 0 37.5 USgpm
120 8 60 4 120 8 60 4
90 6 45 3 90 6 45 3
SAE4
SAE6
140
FLANGES
60 4 30 2 60 4 30 2
6
E8
E8
0
SAE
0
140
12
SAE
0
12
SA
C/S
SA
38
38
30 2 15 1 30 2 15 1
0 0 0 0
10 20 30 40 50 l/min 10 20 30 40 50 l/min 10 20 30 l/min 10 20 30 l/min
2.5 5 7.5 10 12.5 USgpm 2.5 5 7.5 10 12.5 USgpm 2.55 7.5 USgpm 2.55 7.5 USgpm
FLANGES
S/S
13
866-FLANGES | 513.527.4444 | Fax 513.527.4449
13
INLINE VALVES
Needle Valves - Carbon Steel

• Set Screw Allows Knob to be Locked into Position
• Graduated Knob & Spindle for Accurate Flow Control
• Buna O-Ring / PTFE Stem Packing
• These valves are for control of flow only. Not to be used as
isolation or shut-off valves
2 1
NEEDLE VALVES
A
B D E F MAX PSI MAX FLOW GPM WEIGHT (LB)
NPTF SAE
1/4 #4 2.12 1.18 2.67 0.98 5700 4 0.70

3/8 #6 2.12 1.18 2.67 0.98 5700 8 0.66
1/2 #8 2.51 1.29 2.85 1.18 5700 13 1.0
3/4 #12 3.19 1.65 3.70 1.57 5700 21 2.3
1 #16 4.00 1.65 3.93 1.77 5700 40 3.2
1-1/4 #20 4.02 2.08 4.78 2.16 5000 50 5.0
1-1/2 #24 4.02 2.08 5.17 2.55 5000 80 6.5
866-FLANGES | 513.527.4444 | Fax 513.527.4449

INLINE VALVES
TEST POINT
ADAPTERS
Needle Valves - Carbon Steel
VALVES
INLINE
N N 1/2 - 1
Valve Series Material
Thread Type 1 Carbon Steel
N NPTF Pipe Thread
VALVES
BALL
Thread Size
Example N1/2
S#8
COUPLINGS
NPTF
QUICK
PSI bar 2 1 PSI bar 2 1 PSI bar 2 1
120 8 120 8 120 8
90 6 90 6 90 6
1¼
1/4
60 4 60 4 60 4
COUPLINGS
3/4
1½
3/8
1
1/2
30 2 30 2 30 2
WELD
0 0 0
10 20 30 40 50 l/min 30 60 90 120 150 l/min 60 120 180 240 300 l/min
2.5 5 7.5 10 12.5 USgpm 7.51 53 22.5 0 37.5 USgpm 15 30 45 60 75 USgpm
AND RETURN
SAE
SUCTION
PSI bar 2 1 PSI bar 2 1 PSI bar 2 1
120 8 120 8 120 8
90 6 90 6 90 6
SAE4
SAE6
0
E2
60 4 60 4 60 4
SA
6 4
2
FLANGES
E1 E2
E1
E8
SA SA
SA
SA
30 2 30 2 30 2
C/S
0 0 0
10 20 30 l/min 30 60 90 120 150 l/min 60 120 180 240 300 l/min
2.5 5 7.5 USgpm 7.51 5 22.5 30 37.5 g pm

US 15 30 45 60 75 USgpm
FLANGES
S/S
15
866-FLANGES | 513.527.4444 | Fax 513.527.4449
15
INLINE VALVES
Gauge Shutoff - Carbon Steel

• Part Number: GSN1/4-1
• Temperature Range -4°F to +176°F
• Max Pressure 5800 PSI
• Weight 0.33 lb
• Buna O-Ring
• Part Number: GSN90N1/4-1

• Temperature Range -4°F to +176°F
• Max Pressure 5800 PSI
• Weight 0.33 lb
• Buna O-Ring
866-FLANGES | 513.527.4444 | Fax 513.527.4449

INLINE VALVES
TEST POINT
ADAPTERS
Notes
VALVES
INLINE
VALVES
BALL
COUPLINGS
QUICK
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
17
866-FLANGES | 513.527.4444 | Fax 513.527.4449
17
HYDRAULIC
BALL VALVES
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
AE2 Series - Two-Way Block Body Threaded 20
VALVES
AB2 Series - Two-Way Forged Body Threaded 22
INLINE
AV2 - Two-Way Excavator Style 24
AV3 - Three-Way Excavator Style 26
AE3 Series - Three-Way Block Body Threaded 28
VALVES
BALL
AE3K Series - True Three-Way Block Body Threaded 30
AB3 Series - Three-Way Block Body Threaded 32
AES Series - Two-Way Block Body Flange Head 34
ABS Series - Two-Way Forged Body Flange Head 36
COUPLINGS
QUICK
AEF Series - Two-Way Block Body Flat Face 38
ABF Series - Two-Way Forged Body Flat Face 40
AES/F & ABS/F Series Flange Head X Flat-Face 42
ARS Series - Two-Way Direct Mount 44
COUPLINGS
WELD
APK Series - Two-Way Manifold Mount 46
Locking Kits 48
Handles 50
AND RETURN
LV2B - 1000 WOG Two-Way Stainless Steel 52
SUCTION
MV2B - 2000 WOG Two-Way Stainless Steel 53
BALL VALVE PRESSURE SPECIFICATIONS

FLANGES
Anchor Fluid Power ball valves are tested in accordance with ISO 12266-1 standards.
C/S
End connections are manufactured in accordance with one or more of the following standards.
SAE J1926-1 SAE J518-1 ISO 6162-1 ANSI B.1.20.1

ISO 228-1 SAE J518-2 ISO 6162-2
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

19
BALL VALVES
AE2 Series - Two-Way Block Body Threaded

• Carbon steel with zinc nickel plating
• 316 stainless steel available from stock
• POM seats and Buna O-rings standard on carbon steel valves (-11DB)
• POM seats and Viton O-rings standard on stainless steel valves (-22DV)
• Unrestricted bore up to 1” size
• Handle shown in Handle Code field supplied standard
• Dimensions in inches unless otherwise noted
• Dimensions subject to change without notice
CARBON STEEL STAINLESS STEEL
CARBON STEEL AE2 SERIES NPT/SAE

HANDLE LOCKING
NPT SAE DN NPT SAE WEIGHT PSI
(NOMINAL L L2 B H H1 H2 SW SW1 CODE KIT #
PART NUMBER PART NUMBER SIZE IN MM) THREAD THREAD (SEE (LBS) MAX (SEE PG 48-49)
PG 50-51)
AE2N1/8-11DB – 4 1/8 - 27 – 2.72 1.42 0.79 0.98 0.39 1.08 0.75 0.28 12 0.5 7250 LK4/6
AE2N1/4-11DB AE2S#4-11DB 6 1/4 - 18 7/16 -20 UNF-2B 2.72 1.42 0.79 0.98 0.39 1.08 0.75 0.28 12 0.5 7250 LK4/6
AE2N3/8-11DB AE2S#6-11DB 10 3/8 - 18 9/16 -18 UNF-2B 2.87 1.77 1.18 1.38 0.57 1.52 0.94 0.31 13 1.1 7250 LK8/10
AE2N1/2-11DB AE2S#8-11DB 12 1/2 - 14 3/4 -16 UNF-2B 3.23 2.01 1.38 1.57 0.67 1.71 1.18 0.39 14 1.8 7250 LK12
AE2N3/4-11DB AE2S#12-11DB 20 3/4 - 14 1-1/16 -12 UN-2B 3.66 2.36 1.78 2.17 0.94 2.32 1.61 0.55 15 2.6 6090 LK20/25
AE2N1-11DB AE2S#16-11DB 25 1-11.5 1-5/16 -12 UN-2B 4.53 2.76 2.17 2.36 1.02 2.52 1.97 0.55 15 3.3 6090 LK20/25
AE2N1-1/4R-11DB AE2S#20R-11DB 32/25 1-1/4-11.5 1-5/8 -12 UN-2B 5.16 2.76 2.17 2.36 1.02 2.52 1.97/2.17 0.55 15 4.9 6090 LK20/25
AE2N1-1/2R-11DB AE2S#24R-11DB 40/25 1-1/2-11.5 1-7/8 -12 UN-2B 5.63/5.28 2.76 2.17 2.36 1.02 2.52 2.17/2.56 0.55 15 5.1 6090 LK20/25
STAINLESS STEEL AE2 SERIES NPT/SAE

NPT SAE DN HANDLE LOCKING
(NOMINAL NPT SAE CODE WEIGHT PSI KIT #
PART PART L L2 B H H1 H2 SW SW1
SIZE IN THREAD THREAD (SEE (LBS) MAX (SEE PG
NUMBER NUMBER MM) PG 50-51) 48-49)
AE2N1/4-22DV AE2S#4-22DV 6 1/4 - 18 7/16 -20 UNF-2B 2.72 1.42 0.79 0.98 0.39 1.16/1.08 0.75 0.28 32 0.5 7250 LK4/6
AE2N3/8-22DV AE2S#6-22DV 10 3/8 - 18 9/16 -18 UNF-2B 2.87 1.77 1.18 1.38 0.57 1.56/1.52 0.94 0.31 33 0.9 7250 LK8/10
AE2N1/2-22DV AE2S#8-22DV 12 1/2 - 14 3/4 -16 UNF-2B 3.23/3.54 2.01/1.77 1.38/1.18 1.57/1.38 0.67/0.57 1.75/1.52 1.18/1.06 0.39/0.31 34 1.5 7250 LK12
AE2N3/4-22DV AE2S#12-22DV 20 3/4 - 14 1-1/16 -12 UN-2B 3.66/4.21 2.36/1.97 1.77 2.17/1.77 0.94/0.79 2.38/1.91 1.61/1.42 0.55/0.39 35 2.8 6090 LK20/25
AE2N1-22DV AE2S#16-22DV 25 1-11.5 1-5/16 -12 UN-2B 4.53/4.57 2.76/2.36 2.17/1.77 2.36/2.17 1.02/0.94 2.58/2.32 1.97/1.81 0.55 35 4.3 6090 LK20/25
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
AE2 Series - Two-Way Block Body Threaded
AE2 N1 _ - 1 1 D B _
VALVES
INLINE
VALVE SERIES LOCKING KIT OR
OPTIONAL HANDLE CODE
CONNECTION TYPE/SIZE (See pages 48-51)
N NPT Pipe Thread

ADAPTER & STEM SEALS
S SAE Straight Thread
B Buna
B BSPP Thread
VALVES
V Viton
BALL
BORE RESTRICTION
blank Unrestricted Bore BALL & STEM SEATS
R Restricted Bore D POM
BODY & ADAPTER MATERIAL

BALL & STEM MATERIAL
COUPLINGS
1 Carbon Steel
1 Carbon Steel
QUICK
2 316 Stainless Steel
2 Duplex/
316 Stainless Steel
Please consult your system’s seal manufacturer for recommendation of seal selection,
as Anchor Fluid Power does not accept responsibility for seal selection.
COUPLINGS
WELD
MAXIMUM & MINIMUM WORKING TEMPERATURES FOR SEAL MATERIALS
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
21
866-FLANGES | 513.527.4444 | Fax 513.527.4449
21
BALL VALVES
AB2 Series - Two-Way Forged Body Threaded

• Duplex/316 stainless steel available from stock
• POM seats and Buna O-rings standard on carbon steel
valves (-11DB)
• POM seats and Viton O-rings standard on stainless
steel valves (-22DV)
AB2 SERIES NPT/SAE

NPT SAE HANDLE
DN NPT SAE PSI LOCKING
PART PART L L2 L3 B H H1 H2 SW1 CODE WEIGHT
(NOMINAL SIZE
THREAD THREAD (LBS) MAX KIT #
NUMBER NUMBER IN MM) CC/SS (SEE PG 48-49)
(SEE PG 50-51)
AB2N1-1/4 AB2S#20 32 1-1/4-11.5 1-5/8 - 12UN-2B 4.33 1.44 2.30 2.87 3.15 1.44 3.33 0.67 21/37 5.7 6090 LK32/40/50
AB2N1-1/2 AB2S#24 40 1-1/2-11.5 1-7/8 - 12UN-2B 4.49 1.57 2.24 3.35 3.54 1.67 3.72 0.67 21/37 9.6 6090 LK32/40/50
AB2N2 AB2S#32 50 2-11.5 2½ - 12UN-2B 5.08 1.89 2.56 3.90 4.09 1.95 4.27 0.67 22/38 12.2 6090 LK32/40/50
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
AB2 Series - Two-Way Forged Body Threaded
AB2 N2 - 1 1 D B _
VALVES
INLINE
(See pages 48-51)
CONNECTION TYPE/SIZE
N NPT Pipe Thread ADAPTER & STEM SEALS
S SAE Straight Thread B Buna
B BSPP Thread V Viton
VALVES
BALL
BODY & ADAPTER MATERIAL BALL & STEM SEATS
1 Carbon Steel D POM
2 Duplex/
316 Stainless Steel
COUPLINGS
QUICK
1 Carbon Steel
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
23
866-FLANGES | 513.527.4444 | Fax 513.527.4449
23
BALL VALVES
AV2 Series - Two-Way Excavator Style

• Hex stem eliminates need for attached handle
• Detented stop washer prevents accidental actuation
• Mounting holes standard
• Max pressure of 7250 PSI on all sizes
• No handle available for this series
• Optional weld mounting plates sold separately
*Weld Plate Mounting Pattern Matches “J” Dimension (Top of Valve)
AV2 SERIES
NPT SAE A B C D E F G H I J K L M N WEIGHT
AV2N1/2 AV2S#8 1.77 0.79 2.46 2.52 3.15 4.07 1.30 M8 X 1.25 1.26 0.91 0.41 0.25 0.75 0.51 2.9 LBS
AV2N3/4 AV2S#12 2.17 0.92 3.05 3.15 3.98 5.10 1.69 M8 X 1.25 1.57 1.00 0.53 0.32 0.94 0.79 5.3 LBS
AV2N1 AV2S#16 2.56 1.16 3.44 3.54 4.13 5.26 2.09 M8 X 1.25 1.89 1.08 0.53 0.32 0.94 0.98 7.6 LBS
AV2N1-1/4R AV2S#20R 2.56 1.16 3.44 3.54 4.13 5.26 2.09 M8 X 1.25 1.89 1.08 0.53 0.32 0.94 0.98 7.2 LBS
AV2N1-1/4 AV2S#20 3.15 1.32 4.07 3.39 4.13 5.26 2.52 M8 X 1.25 2.36 0.96 0.53 0.32 1.26 1.26 11.0 LBS
WELD MOUNTING PLATES

VALVE
PART # U V W X Y KIT INCLUDED SHCS
SIZE
*WP-AV#8U 1/2” N/A 1.00 N/A N/A M6 X 1.00 M6 X 50 MM

WP-AV#12U 3/4” 1.97 1.00 1.50 .50 5/16-18 UNC-2B 5/16 X 2.25”
WP-AV#16U 1” & 1 1/4” REDUCED 2.36 1.00 1.50 .50 5/16-18 UNC-2B 5/16 X 2.75”
WP-AV#20U 1 1/4” FULL 2.86 1.00 1.50 .50 5/16-18 UNC-2B 5/16 X 3.25”
*No internal weld hole on this size weld plate
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
AV2 Series - Two-Way Excavator Style
AV2 N1/2 _ - 1 1 D V
VALVES
INLINE
VALVE SERIES
V Viton (Standard)
VALVES
BALL
BORE RESTRICTION
COUPLINGS
QUICK
1 Carbon Steel 1 Carbon Steel
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

25
BALL VALVES
AV3 Series - Three-Way Excavator Style

• Hex stem eliminates need for attached handle
• No handle available for this series
• Detented stop washer prevents accidental actuation
• Mounting holes standard
• Max pressure of 5075 PSI on all sizes
• Optional weld mounting plates sold separately
*Weld Plate Mounting Pattern Matches “J” Dimension (Top of Valve)
AV3 SERIES
NPT SAE A A1 B C D E F G I J K L M N P WEIGHT
AV3LN1/2 AV3LS#8 1.77 2.62 0.79 2.74 2.52 3.15 4.07 1.30 M8 X 1.25 1.26 0.91 0.41 0.25 0.75 0.51 3.0 LBS
AV3LN3/4 AV3LS#12 2.17 3.35 0.92 2.89 3.15 3.98 5.10 1.69 M8 X 1.25 1.57 1.00 0.53 0.32 0.94 0.79 5.5 LBS
AV3LN1 AV3LS#16 2.56 3.84 1.16 3.29 3.54 4.13 5.26 2.09 M8 X 1.25 1.89 1.08 0.53 0.32 0.94 0.98 7.9 LBS
AV3LN1-1/4R AV3LS#20R 2.56 3.90 1.16 3.29 3.54 4.13 5.26 2.09 M8 X 1.25 1.89 1.08 0.53 0.32 0.94 0.98 7.7 LBS
AV3LN1-1/4 AV3LS#20 3.15 4.65 1.32 3.88 3.39 4.13 5.26 2.52 M8 X 1.25 2.36 0.96 0.53 0.32 1.26 1.26 11.7 LBS
WELD MOUNTING PLATES

VALVE
PART # U V W X Y KIT INCLUDED SHCS
SIZE
*WP-AV#8U 1/2” N/A 1.00 N/A N/A M6 X 1.00 M6 X 50 MM

WP-AV#12U 3/4” 1.97 1.00 1.50 .50 5/16-18 UNC-2B 5/16 X 2.25”
WP-AV#16U 1” & 1 1/4” REDUCED 2.36 1.00 1.50 .50 5/16-18 UNC-2B 5/16 X 2.75”
WP-AV#20U 1 1/4” FULL 2.86 1.00 1.50 .50 5/16-18 UNC-2B 5/16 X 3.25”
*No internal hole on this size weld plate.
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
AV3 Series - Three-Way Excavator Style
AV3L N1/2 _ - 1 1 D B
VALVES
INLINE
VALVE SERIES
V Viton (Standard)
VALVES
BALL
BORE RESTRICTION
BODY & ADAPTER MATERIAL BALL & STEM MATERIAL
COUPLINGS
1 Carbon Steel 1 Carbon Steel
QUICK
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

27
BALL VALVES
AE3 Series - Three-Way Block Body Threaded

• L-port design diverter valve
valves (-11DB)
AE3 SERIES NPT/SAE

NPT SAE DN HANDLE LOCKING
(NOMINAL NPT SAE CODE WEIGHT PSI KIT #
PART PART L L2 B B1 B2 H H1 H2 SW SW1
SIZE IN THREAD THREAD CC/SS (LBS) MAX (SEE
NUMBER NUMBER MM) (SEE PG 50-51) PG 48-49)
AE3LN1/4 AE3LS#4 6 1/4 - 18 7/16 -20 UNF-2B 2.72 1.42 1.18 1.36 1.83 1.18 0.59 1.28 0.75 0.28 12/32 0.9 7250 LK4/6
AE3LN3/8 AE3LS#6 10 3/8 - 18 9/16 -18 UNF-2B 2.87 1.77 1.57 1.44 2.13 1.38 0.57 1.52 0.94 0.31 13/33 1.4 7250 LK8/10
AE3LN1/2 AE3LS#8 12 1/2 - 14 3/4 -16 UNF-2B 3.23 2.01 1.77 1.61 2.38 1.77 0.87 1.91 1.18 0.39 14/34 2.1 7250 LK12
AE3LN3/4 AE3LS#12 20 3/4 - 14 1-1/16 -12 UN-2B 3.66 2.36 2.17 1.89 2.81 2.36 1.14 2.52 1.61 0.55 15/35 3.9 6090 LK20/25
AE3LN1 AE3LS#16 25 1-11.5 1-5/16 -12 UN-2B 4.53 2.76 2.56 2.26 3.44 2.56 1.22 2.72 1.97 0.55 15/35 6.0 6090 LK20/25
AE3LN1-1/4R AE3LS#20R 32/25 1-1/4-11.5 1-5/8 -12 UN-2B 5.16 2.76 2.56 2.64/2.58 3.82/3.76 2.56 1.22 2.72 1.97/2.17 0.55 15/36 6.8 6090 LK20/25
AE3LN1-1/2R AE3LS#24R 40/25 1-1/2-11.5 1-7/8 -12 UN-2B 5.63/5.31 2.76 2.56 2.74/2.64 3.92/3.82 2.56 1.22 2.72 2.17/2.56 0.55 15/36 6.4 6090 LK20/25
Only pressurize center port (port #2). Side ports (ports #1 and #3) should not be pressurized or be exposed to back pressure
that is greater than the inlet pressure. Failure to follow these guidelines will result in internal leakage through the valve.
For applications requiring pressure applied to side ports, please refer to AE3K Series valves.
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
AE3 Series - Three-Way Block Body Threaded
AE3 L N1 _ -1 1 D B _
VALVES
INLINE
PORT TYPE (See pages 48-51)
L “Diverter” L-Port
CONNECTION TYPE/SIZE B Buna
VALVES
BALL
N NPT Pipe Thread V Viton
BALL & STEM SEATS
BORE RESTRICTION D POM
blank Unrestricted Bore
R Restricted Bore BALL & STEM MATERIAL
COUPLINGS
QUICK
BODY & ADAPTER MATERIAL 1 Carbon Steel
2 Duplex/
1 Carbon Steel
316 Stainless Steel
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
29
866-FLANGES | 513.527.4444 | Fax 513.527.4449
29
BALL VALVES
AE3K Series - True Three-Way Block Body Threaded
• Any port can be pressurized on AE3K series. Backup o-ring behind

seat prevents internal leakage.
• PEEK seats and Buna O-rings standard on AE3K series (-11PB)
AE3K SERIES NPT/SAE

HANDLE LOCKING
NPT SAE DN NPT SAE WEIGHT PSI
(NOMINAL L L2 B B1 B2 H H1 H2 SW SW1 CODE KIT #
PART NUMBER PART NUMBER SIZE IN MM) THREAD THREAD (SEE (LBS) MAX (SEE
PG 50-51) PG 48-49)
AE3KLN1/4-11PB AE3KLS#4-11PB 6 1/4 - 18 7/16-20 UNF-2B 2.72 1.42 1.18 1.36 1.83 1.18 0.59 1.28 0.75 0.28 12 0.9 7250 LK4/6
AE3KLN3/8-11PB AE3KLS#6-11PB 10 3/8 - 18 9/16-18 UNF-2B 2.87 1.77 1.57 1.44 2.13 1.38 0.57 1.52 0.94 0.31 13 1.4 7250 LK8/10
AE3KLN1/2-11PB AE3KLS#8-11PB 12 1/2 - 14 3/4 -16 UNF-2B 3.23 2.01 1.77 1.61 2.38 1.77 0.87 1.91 1.18 0.39 14 2.1 7250 LK12
AE3KLN3/4-11PB AE3KLS#12-11PB 20 3/4 - 14 1-1/16-12 UN-2B 3.66 2.36 2.17 1.89 2.81 2.36 1.14 2.52 1.61 0.55 15 3.9 6090 LK20/25
AE3KLN1-11PB AE3KLS#16-11PB 25 1-11.5 1-5/16-12 UN-2B 4.53 2.76 2.56 2.26 3.44 2.56 1.22 2.72 1.97 0.55 15 6.0 6090 LK20/25
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
AE3K Series - True Three-Way Block Body Threaded

AE3K L N1 _ - 1 1 P B _
VALVES
INLINE
VALVES
BALL
N NPT Pipe Thread
S SAE Straight Thread BALL & STEM SEATS
P PEEK- Standard
BORE RESTRICTION
blank Unrestricted Bore
COUPLINGS
R Restricted Bore
QUICK
1 Carbon Steel
COUPLINGS
1 Carbon Steel
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
31
866-FLANGES | 513.527.4444 | Fax 513.527.4449
31
BALL VALVES
AB3 Series - Three-Way Block Body Threaded
• L-port design diverter valve

AB3 SERIES
DN NPT HANDLE PSI LOCKING
PART NUMBER L L2 B B1 B2 H H1 H2 SW SW1 WEIGHT
(NOMINAL SIZE
THREAD CODE (LBS) MAX KIT #
IN MM) (SEE PG 50-51) (SEE PG 48-49)
AB3LN1-1/4-11DB 32 1-1/4-11.5 4.06 2.91 3.15 2.34 3.72 3.15 1.44 3.31 2.36 0.67 21 8.5 6090 LK32/40/50
AB3LN1-1/2-11DB 40 1-1/2-11.5 4.49 3.54 3.94 3.01 4.66 3.54 1.68 3.70 2.95 0.67 21 13.8 6090 LK32/40/50
AB3LN2-11DB 50 2-11.5 5.04 4.33 4.72 3.68 5.69 4.33 2.17 4.49 3.35 0.67 21 23.0 6090 LK32/40/50
Only pressurize center port (port #2). Side ports (ports #1 and #3) should not be pressurized or be exposed to back pressure
that is greater than the inlet pressure. Failure to follow these guidelines will result in internal leakage through the valve.
For applications requiring pressure applied to side ports, please refer to AE3K Series valves.
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
AB3 Series - Three-Way Block Body Threaded
AB3 L N2 - 1 1 D B _
VALVES
INLINE
B Buna
VALVES
CONNECTION TYPE/SIZE V Viton
BALL
N NPT Pipe Thread
BALL & STEM SEATS
D POM- Standard
1 Carbon Steel
COUPLINGS
QUICK
1 Carbon Steel
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
33
866-FLANGES | 513.527.4444 | Fax 513.527.4449
33
BALL VALVES
AES Series - Two-Way Block Body Flange Head

• O-ring groove both ends
valves (-11DB)
AES SERIES CODE 61/CODE 62

HANDLE
CODE 61 CODE 62 DN FLANGE LOCKING
L L3 B H H1 H2 SW1 CODE WEIGHT PSI MAX
PART NUMBER PART NUMBER
(NOMINAL SIZE
SIZE (LBS) KIT #
IN MM) CC/SS (SEE PG 48-49)
(SEE PG 50-51)
AES3#8 AES6#8 13 1/2 5.94 2.97 1.38 1.57 0.67 1.71 0.39 14/34 2.2 5075/6090 LK12
AES3#12 AES6#12 19 3/4 6.38/6.85 3.19/3.43 1.77 2.17 0.94 2.32 0.55 15/35 4.0 5075/6090 LK20/25
AES3#16 AES6#16 25 1 7.01/7.80 3.50/3.90 2.17 2.36 1.02 2.52 0.55 15/35 5.7 4640/6090 LK20/25
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
AES Series - Two-Way Block Body Flange Head
AES3 #16 - 1 1 D B _
VALVES
INLINE
AES3 Code 61
(See pages 48-51)
AES6 Code 62
CONNECTION SIZE B Buna
VALVES
BALL
V Viton
BALL & STEM SEATS
1 Carbon Steel
2 316 Stainless Steel D POM
COUPLINGS
QUICK
1 Carbon Steel
2 Duplex/
316 Stainless Steel
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
35
866-FLANGES | 513.527.4444 | Fax 513.527.4449
35
BALL VALVES
ABS Series - Two-Way Forged Body Flange Head

• O-ring groove both ends
• POM seats and Buna O-rings standard on carbon
steel valves (-11DB)
ABS SERIES CODE 61/CODE 62

HANDLE
CODE 61 CODE 62 DN FLANGE LOCKING
L L3 B H H1 H2 SW1 CODE WEIGHT PSI MAX
PART NUMBER PART NUMBER
(NOMINAL SIZE
SIZE (LBS) KIT #
IN MM) CC/SS (SEE PG 48-49)
(SEE PG 50-51)
ABS3#20 ABS6#20 32 1-1/4 7.52/8.78 3.90/4.53 2.87 3.15 1.44 3.33 0.67 21/37 8.8 4060/6090 LK32/40/50
ABS3#24 ABS6#24 38 1-1/2 9.09/11.06 4.55/5.53 3.35 3.54 1.67 3.72 0.67 21/37 12.3 3045/6090 LK32/40/50
ABS3#32 ABS6#32 51 2 9.13/12.44 4.57/6.24 3.90 4.09 1.95 4.27 0.67 22/38 17.0 3045/6090 LK32/40/50
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
ABS Series - Two-Way Forged Body Flange Head
ABS3 #32 - 1 1 D B _
VALVES
INLINE
ABS3 Code 61
(See pages 48-51)
ABS6 Code 62
VALVES
BALL
V Viton
BALL & STEM SEATS
1 Carbon Steel
2 Duplex/ D POM- Standard
316 Stainless Steel
COUPLINGS
QUICK
1 Carbon Steel
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
37
866-FLANGES | 513.527.4444 | Fax 513.527.4449
37
BALL VALVES
AEF Series - Two-Way Block Body Flat Face
• Flat face both ends

• POM seats and Buna O-rings standard on carbon
steel valves (-11DB)
• Both metric (ISO 6162) and UNC (SAE J518) threads
standard on all valves
AEF SERIES CODE 61/CODE 62

CODE 61 CODE 62 HANDLE
DN FLANGE LOCKING
PART PART D1 D2 A1 B1 B2 L L1 B SW1 CODE WEIGHT PSI MAX
(NOMINAL
SIZE (LBS) KIT #
NUMBER NUMBER SIZE IN MM) CC/SS (SEE PG 48-49)
(SEE PG 50-51)
AEF3#8 AEF6#8 13 1/2 M8 5/16 - 18 UNC 0.69/0.72 1.50/1.59 0.79/0.83 4.25 2.13 2.36 0.39 14/34 3.1 5075/6090 LK12FF
AEF3#12 AEF6#12 19 3/4 M10 3/8 - 16 UNC 0.88/0.94 1.87/2.00 0.87/0.94 5.16 2.58 2.76/3.15 0.55 15/35 6.2 5075/6090 LK20/25FF
M10/ 3/8 - 16 UNC/

AEF3#16 AEF6#16 25 1 1.03/1.09 2.06/2.25 0.87/1.06 5.67 2.83 2.95/3.54 0.55 15/35 9.0 4640/6090 LK20/25FF
M12 7/16 - 14 UNC
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
AEF Series - Two-Way Block Body Flat Face
AEF3 #16 - 1 1 D B _
VALVES
INLINE
AEF3 Code 61
(See pages 48-51)
AEF6 Code 62
VALVES
V Viton
BALL
BALL & STEM SEATS
1 Carbon Steel
2 316 Stainless Steel D POM- Standard
COUPLINGS
QUICK
1 Carbon Steel
2 Duplex/
316 Stainless Steel
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
39
866-FLANGES | 513.527.4444 | Fax 513.527.4449
39
BALL VALVES
ABF Series - Two-Way Forged Body Flat Face

• Flat face both ends
valves (-11DB)
ABF SERIES CODE 61/CODE 62

CODE 61 CODE 62 HANDLE
DN FLANGE LOCKING
PART PART D1 D2 A1 B1 B2 L L1 B SW1 CODE WEIGHT PSI MAX
(NOMINAL
SIZE (LBS) KIT #
NUMBER NUMBER SIZE IN MM) CC/SS (SEE PG 48-49)
(SEE PG 50-51)
M10/ 7/16- 14 UNC/

ABF3#20 ABF6#20 32 1-1/4 1.19/1.25 2.31/2.63 0.98 7.13 4.09 3.35/3.94 0.67 21/37 11.0 4060/6090 LK32/40/50FF
M12 1/2 - 13 UNC
M12/ 1/2 - 13 UNC/
ABF3#24 ABF6#24 38 1-1/2 1.41/1.44 2.75/3.13 1.06/1.38 8.23 4.65 3.94/4.72 0.67 21/37 22.5 3045/6090 LK32/40/50FF
M16 5/8 - 11 UNC
M12/ 1/2 - 13 UNC/
ABF3#32 ABF6#32 51 2 1.69/1.75 3.06/3.81 1.06/1.50 9.43 5.12 4.33/5.51 0.67 22/38 31.1 3045/6090 LK32/40/50FF
M20 3/4 - 10 UNC
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
ABF Series - Two-Way Forged Body Flat Face
ABF3 #32 - 1 1 D B _
VALVES
INLINE
ABF3 Code 61
(See pages 48-51)
ABF6 Code 62
VALVES
BALL
V Viton
BALL & STEM SEATS
1 Carbon Steel
2 Duplex/ D POM- Standard
316 Stainless Steel
COUPLINGS
QUICK
1 Carbon Steel
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
41
866-FLANGES | 513.527.4444 | Fax 513.527.4449
41
BALL VALVES
AES/F & ABS/F Series - Flange Head X Flat-Face

• O-ring one end, flat face one end
• POM seats and Viton O-rings standard on stainless steel valves (-22DV)
• Both metric (ISO 6162) and UNC (SAE J518) threads standard on all valves
AES/F
ABS/F
AES/F & ABS/F SERIES CODE 61/CODE 62

CODE 61 CODE 62 DN HANDLE
FLANGE LOCKING
PART PART (NOMINAL
D1 D2 A1 B1 B2 L L1 B SW1 CODE WEIGHT PSI MAX
SIZE IN SIZE (LBS) KIT #
NUMBER NUMBER CC/SS (SEE PG 48-49)
MM) (SEE PG 50-51)
AES/F3#8 AES/F6#8 13 1/2 5/16 - 18 UNC M8 0.69/0.72 1.50/1.59 0.79/0.83 5.10 2.13 2.36 0.39 14/34 2.6 5075/6090 LK12FF
AES/F3#12 AES/F6#12 19 3/4 3/8 - 16 UNC M10 0.88/0.94 1.87/2.00 0.87/0.94 5.77/6.00 2.60 2.76/3.15 0.55 15/35 5.1 5075/6090 LK20/25FF
3/8 - 16 UNC/
AES/F3#16 AES/F6#16 25 1 M10/M12 1.03/1.09 2.06/2.25 0.87/1.06 6.34/6.73 2.83 2.95/3.54 0.55 15/35 7.4 4640/6090 LK20/25FF
7/16 - 14 UNC
7/16 - 14 UNC/
ABS/F3#20 ABS/F6#20 32 11/4 M10/M12 1.19/1.25 2.31/2.63 0.98 6.95/7.58 3.07 3.35/3.94 0.67 21/37 9.1 4060/6090 LK32/40/50FF
1/2 - 13 UNC
1/2 - 13 UNC/
ABS/F3#24 ABS/F6#24 38 11/2 M12/M16 1.41/1.44 2.75/3.13 1.06/1.38 8.15/9.13 3.62 3.94/4.72 0.67 21/37 17.4 3045/6090 LK32/40/50FF
5/8 - 11 UNC
1/2 - 13 UNC/
ABS/F3#32 ABS/F6#32 51 2 M12/M20 1.69/1.75 3.06/3.81 1.06/1.50 8.92/10.57 4.33 4.33/5.51 0.67 22/38 24.0 3045/6090 LK32/40/50FF
3/4 - 10 UNC
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
AES/F & ABS/F Series - Flange Head X Flat-Face
AES/F3 #16 - 1 1 D B _
VALVES
INLINE
AES/F3 Code 61 Block Body
(See pages 48-51)
AES/F6 Code 62 Block Body
ABS/F3 Code 61 Forged Body ADAPTER & STEM SEALS
ABS/F6 Code 62 Forged Body
VALVES
B Buna
BALL
V Viton
CONNECTION SIZE
BALL & STEM SEATS
D POM- Standard
1 Carbon Steel
2 Duplex/
COUPLINGS
316 Stainless Steel
QUICK
1 Carbon Steel
2 Duplex/
316 Stainless Steel
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
43
866-FLANGES | 513.527.4444 | Fax 513.527.4449
43
BALL VALVES
ARS Series - Two-Way Direct Mount

valves (-11DB)
• POM seats and Viton O-rings standard on stainless steel
valves (-22DV)
• Bypass port with blanking flange standard. Add APK2#4
to use as bypass valve.
ARS SERIES
HANDLE LOCKING
PART DN FLANGE WEIGHT
(NOMINAL D1 T1 D2 T2 A1 B1 L L1 B H H2 SW1 CODE PSI MAX KIT #
NUMBER SIZE IN MM) SIZE (SEE (LBS)
(SEE PG 48-49)
PG 50-51)
ARS3#40 64 2-1/2 M12 27 1/2 - 13 UNC 1.06 2.00 3.50 5.91 2.97 7.09 6.89 7.09 0.67 22 61.7 2500 LK32/40/50
ARS3#48 76 3 M16 30 5/8 - 11 UNC 1.18 2.44 4.19 6.10 3.17 8.19 7.95 - 0.75 58 94.8 2300 LK76/102/127
ARS3#64 102 4 M16 30 5/8 - 11 UNC 1.18 3.06 5.13 6.69 3.35 10.16 9.88 - 1.06 57 160.9 500 LK76/102/127
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
ARS Series - Two-Way Direct Mount
ARS3 #40 -1 1 DB _
VALVES
INLINE
VALVE SERIES OPTIONAL LOCKING KIT
(See pages 49)
ARS3 Code 61

VALVES
V Viton
BALL
BALL & STEM SEATS
1 Carbon Steel D POM- Standard
COUPLINGS
QUICK
1 Carbon Steel
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
45
866-FLANGES | 513.527.4444 | Fax 513.527.4449
45
BALL VALVES
APK Series - Two-Way Manifold Mount

APK SERIES
HANDLE
PART DN WEIGHT
(NOMINAL L L1 L2 L3 L4 L5 L6 L7 B B1 H H1 H2 T1 T2 D1 D2 D3 D4 SW SW1 CODE PSI MAX
NUMBER SIZE IN MM) (SEE (LBS)
PG 50-51)
APK2#4-11DB 6 2.32 1.38 0.33 0.93 1.38 0.33 0.18 0.69 1.57 1.06 1.38 0.79 1.48 0.07 0.27 0.24 0.47 0.25 0.43 0.94 0.28 12 1.3 7250
APK2#6-11DB 10 2.87 1.73 0.39 1.14 2.17 0.30 0.28 1.08 2.17 1.57 1.77 0.96 1.91 0.07 0.31 0.37 0.59 0.33 N/A 1.26 0.31 13 2.6 7250
APK2#8-11DB 12 3.86 2.28 0.63 1.67 3.27 0.30 0.39 1.63 2.36 1.77 2.17 1.26 2.30 0.07 0.31 0.49 0.98 0.33 N/A 1.42 0.39 14 5.0 7250
APK2#12-11DB 20 4.61 2.72 0.79 2.05 3.82 0.39 0.47 1.91 2.76 2.01 2.76 1.54 2.91 0.11 0.43 0.79 1.18 0.41 0.67 N/A 0.55 15 8.8 5800
APK2#16-11DB 25 5.43 3.19 0.94 2.44 4.53 0.39 0.28 2.26 3.15 2.36 3.15 1.81 3.31 0.11 0.43 0.94 1.38 0.41 0.67 1.97 0.55 15 12.8 5800
APK2#20-11DB 32 6.50 3.78 1.14 2.95 5.35 0.47 0.43 2.68 3.94 3.07 3.94 2.23 4.11 0.11 0.47 1.26 1.57 0.51 0.75 2.76 0.67 21 24.2 5800
APK2#24-11DB 40 6.89 4.41 1.12 3.33 4.41 1.12 0.98 2.20 5.12 3.74 3.94 2.07 4.11 0.11 0.69 1.50 1.91 0.67 1.02 N/A 0.67 21 33.6 5800
APK SERIES
PART DN LOCKING KIT #
(NOMINAL D1 E1 E2 E3 E4 E5 E6 E7 E8 M O-RING (MM)
NUMBER SIZE IN MM)
(SEE PG 48-49)
APK2#4-11DB 6 0.24 1.38 1.38 1.99 0.00 0.33 0.53 0.79 0.69 M6 7.50 X 2.50 LK4/6FF
APK2#6-11DB 10 0.37 1.73 2.07 2.48 0.10 0.39 0.79 1.08 0.98 M8 10.50 X 2.50 LK8/10FF
APK2#8-11DB 12 0.61 2.28 2.93 3.23 0.33 0.63 0.89 1.18 1.30 M8 20.50 X 2.50 LK12FF
APK2#12-11DB 20 0.79 2.72 3.43 3.82 0.39 0.79 1.00 1.38 1.52 M10 23.50 X 3.50 LK20/25FF
APK2#16-11DB 25 0.94 3.19 3.98 4.49 0.55 0.94 1.18 1.57 1.71 M10 28.50 X 3.50 LK20/25FF
APK2#20-11DB 32 1.26 3.78 4.69 5.35 0.67 1.14 1.54 1.97 2.01 M12 33.50 X 3.50 LK32/40/50FF
APK2#24-11DB 40 1.50 4.41 4.41 5.77 0.00 1.12 1.87 2.56 2.20 M16 42.00 X 3.50 LK32/40/50FF
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
APK Series - Two-Way Manifold Mount

APK2 #20 - 1 1 D B
VALVES
INLINE
VALVE SERIES
APK2 Manifold Mount 2-way
B Buna- Standard
VALVES
CONNECTION SIZE
BALL
V Viton

1 Carbon Steel BALL & STEM SEATS
D POM
P PEEK
COUPLINGS
QUICK
1 Carbon Steel
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
47
866-FLANGES | 513.527.4444 | Fax 513.527.4449
47
BALL VALVES
Locking Kits - for Standard Valves (2-way & 3-way)

• Add suffix ‘L’ to the end of any valve part number
to have locking kit installed prior to shipment
• Stainless steel
Switching Positions
Assembly
STANDARD LOCKING KITS

PART FITS DN
(NOMINAL T X Y Z
NUMBER SIZE IN MM)
LK4/6 4/6 0.03 0.71 0.35 0.79
LK8/10 8/10 0.05 0.83 0.35 0.79
LK12 12 0.05 1.14 0.35 0.79
LK20/25 20/25 0.06 1.34 0.35 0.79
LK32/40/50 32/40/50 0.07 2.13 0.35 0.79
Locking device consisting of:

*All locking kits in stainless steel
1. Mounting plate
2. Stop or actuation disc
3. Retaining ring
4. Thrust pad
5. Disc (DN32, DN40 and DN50)
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
Locking Kits - for Flanged & Manifold Mount Valves
(AEF, ABF, AES/F, ABS/F & APK Series)
VALVES
Add suffix ‘L’ to the end of any valve part number
INLINE
to have locking kit installed prior to shipment
• Stainless steel
VALVES
BALL
Switching Positions
COUPLINGS
QUICK
Assembly
COUPLINGS
WELD
FLANGED VALVE LOCKING KITS
PART FITS DN
1. Mounting plate (NOMINAL T X Y Z
NUMBER
2. Cam plate SIZE IN MM)
3. Thrust ring LK4/6FF 4/6 0.05 0.71 0.35 0.59

4. Lock washer
LK8/10FF 8/10 0.05 0.83 0.35 0.59
LK12FF 12 0.05 1.10 0.35 0.59
AND RETURN
LK20/25FF 20/25 0.07 1.34 0.35 0.59
SUCTION
LK32/40/50FF 32/40/50 0.07 1.65 0.35 0.59
*All locking kits in stainless steel

1. Bolts
2. Bracket
FLANGES
3. Pin
C/S
LOCKING KIT FOR 3” - 5” ARS SERIES

PART NUMBER
LK76/102/127
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

49
BALL VALVES
Handles
• Dimensions in inches unless otherwise noted • Dimensions subject to change without notice
ZINC DIE CAST HANDLES

PART
8KT CODE L H h
NUMBER
A03709 7 12 2.99 1.06 0.33
A03708 8 13 3.94 1.14 0.43
A03706 10 14 4.45 2.13 0.55
A03694 14 15 7.24 2.24 0.71
STAINLESS STEEL HANDLES

PART
4KT CODE L H h
NUMBER
A03749 7 32 2.99 0.91 0.16
A03750 8 33 5.12 1.57 0.16
A03751 10 34 5.12 1.57 0.16
A03752 14 35 7.28 1.77 0.20
STEEL HANDLES
PART
4KT CODE L H h
NUMBER
A03755 27 57 39.37 3.54 2.34
A03754 19 58 23.62 3.15 2.09
866-FLANGES | 513.527.4444 | Fax 513.527.4449

BALL VALVES
TEST POINT
ADAPTERS
Handles
VALVES
INLINE
ALUMINUM HANDLES
PART
8KT CODE L H h
NUMBER
A03020 8 4 3.58 0.94 0.35
A03636 9 54 5.12 1.85 0.43
VALVES
A03009 12 7 7.36 2.13 0.51
BALL
A03004 14 8 7.36 2.44 0.51
A03027 17 9 10.91 2.76 0.55
A03028 19 10 10.20 3.19 0.65
A03610 22 11 14.21 2.68 0.71
COUPLINGS
QUICK
STEEL AND STAINLESS STEEL* HANDLES
PART
8KT CODE L H h
NUMBER
COUPLINGS
A03804 7 16 3.78 1.57 0.35
WELD
A03803 8 17 3.78 1.57 0.35
A03414 10 19 4.57 1.89 0.49
A03634 14 20 7.36 2.13 0.51
A03440 17 21 8.31 2.60 0.55
A03758 17* 37 8.31 2.60 0.55
A03539 17 22 12.60 2.99 0.67
A03759 17* 38 12.60 2.99 0.67
AND RETURN
A03548 19 23 12.60 2.99 0.67
SUCTION
ALUMINUM HANDLES
PART
8KT CODE L h
NUMBER
FLANGES
A03029 11 41 6.93 0.47

C/S
A03030 12 42 7.87 0.55

A03031 14 43 7.87 0.51
A03005 17 44 9.45 0.55
A03032 19 45 10.98 0.63
A03620 22 46 12.64 0.75
A03010 24 47 12.64 0.75
FLANGES
S/S
51
866-FLANGES | 513.527.4444 | Fax 513.527.4449
51
BALL VALVES
LV2B Series - 1000 WOG Stainless Steel

• All stainless steel construction
• Locking handles standard
• Ideal for suction, pressure and return lines
• Available in NPT & SAE threads
• Mounting holes standard on SAE #16 - #64
• See page 78 for Limit Switch and Proximity Sensor accessories
MODEL CODE: LV2B N 1/2” -2T

LV2B SERIES - NPT
SIZE A B C D E
F
UNC
G THREAD TYPE (N-NPT; S-SAE)
1/4” .36 2.13 2.13 1.12 .49 N/A 4.33 THREAD SIZE (EX. N1/2”; S#8)
3/8” .50 2.13 2.17 1.12 .49 N/A 4.33
1/2” .59 2.24 2.28 1.12 .49 N/A 4.53
COMPONENT MATERIALS
3/4” .79 2.68 2.40 1.12 .49 N/A 4.53
COMPONENT MATERIAL QTY
1” .98 3.15 3.03 1.38 .91 N/A 5.04
VALVE BODY ASTM A351 1
1-1/4” 1.26 3.58 3.19 1.48 1.00 N/A 5.04 GR CF8M
1-1/2” 1.50 4.06 3.54 1.48 1.00 N/A 6.10 TAILPIECE ASTM A351 1
GR CF8M
2” 1.97 4.88 4.25 1.50 1.00 N/A 6.10
BALL ASTM A351 1
2-1/2” 2.56 6.30 5.20 N/A N/A N/A 9.06
GR CF8M
3” 3.15 7.28 5.71 N/A N/A N/A 9.06 STEM 316 1
BALL SEAT PTFE 2
LV2B SERIES - SAE
STEM SEAT PTFE 1
F
SIZE A B C D E G STEM PACKING PTFE 1
UNC
STEM GLAND 304 1
#4 .35 2.40 2.13 1.12 .49 N/A 4.33
HANDLE 304 1
#6 .47 2.40 2.17 1.12 .49 N/A 4.33
STEM LOCK WASHER 304 1
#8 .59 2.52 2.28 1.12 .49 N/A 4.53
STEM NUT 304 1
#12 .79 3.23 2.40 1.12 .49 N/A 4.53
HANDLE SLEEVE VINYL 1
#16 .98 3.62 3.03 1.38 .91 1/4-20 5.04
LOCK 304 1
#20 1.26 3.96 3.19 1.48 1.00 1/4-20 5.04
#24 1.50 4.23 3.54 1.48 1.00 1/4-20 6.10
#32 1.97 4.90 4.25 1.50 1.00 1/4-20 6.10
#40 2.56 6.30 5.20 2.25 1.18 1/4-20 9.06
#48 3.15 7.28 5.71 2.76 1.18 1/4-20 9.06
* 4”SAE - 500 PSI max for LV2BS#64-2T-MH
#64 3.93 8.80 7.11 2.76 1.18 1/4-20 13.00
866-FLANGES | 513.527.4444 | Fax 513.527.4449

866-FLANGESsales@anchorfluidpower.com | anchorfluidpower.com
| 513.527.4444 | Fax 513.527.4449
BALL VALVES
TEST POINT
ADAPTERS
MV2B Series - 2000 WOG Stainless Steel
• Locking handles standard
• Ideal for suction, pressure and return lines
VALVES
INLINE
• Available in NPT & SAE threads
VALVES
BALL
COUPLINGS
QUICK
MV2B SERIES - NPT MODEL CODE: MV2B N 1/2” -2T
SIZE A B C G
COUPLINGS
1/4” .36 2.13 2.13 4.33
THREAD TYPE (N-NPT; S-SAE)
WELD
3/8” .50 2.13 2.17 4.33 THREAD SIZE (EX. N1/2”; S#8)
1/2” .59 2.24 2.28 4.53
3/4” .79 2.76 2.40 4.53 COMPONENT MATERIALS
COMPONENT MATERIAL QTY
1” .98 3.25 3.03 5.04
1-1/4” 1.26 3.58 3.19 5.04 VALVE BODY ASTM A351 1
GR CF8M
1-1/2” 1.50 4.06 3.54 6.10
AND RETURN
TAILPIECE ASTM A351 1
SUCTION
2” 1.97 4.90 4.25 6.10 GR CF8M
BALL ASTM A351 1
GR CF8M
MV2B SERIES - SAE STEM 316 1
SIZE A B C G BALL SEAT PTFE 2
#4 .35 2.40 2.13 4.33 STEM SEAT PTFE 1
#6 .47 2.40 2.17 4.33 STEM PACKING PTFE 1
#8 .59 2.52 2.28 4.53 STEM GLAND 304 1

FLANGES
#12 .79 3.23 2.40 4.53 HANDLE 304 1

C/S
#16 .98 3.62 3.03 5.04 STEM LOCK WASHER 304 1
#20 1.26 3.96 3.19 5.04 STEM NUT 304 1
#24 1.50 4.23 3.54 6.10 HANDLE SLEEVE VINYL 1
#32 1.97 4.90 4.25 6.10 LOCK 304 1

FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

53
QUICK
COUPLINGS
866-FLANGES | 513.527.4444 | Fax 513.527.4449

QUICK COUPLINGS
TEST POINT
ADAPTERS
Standard Quick Couplings 56
VALVES
Specialty Quick Couplings 57
INLINE
Clean Break Couplings 59
Dust Caps & Plugs 60
VALVES
BALL
• Connection solutions from quick connect mono-couplings
to multi-coupling systems.
• Applications including but not limited to automation, oil and gas,
automotive, medical, aerospace and steel industries.
COUPLINGS
QUICK
• Operating pressures ranging up to 43,500 psi.
• Many different end connections, materials and seals offered as
standard options with custom/special options available upon request.
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

55
QUICK COUPLINGS
STANDARD COUPLINGS
Miniature Couplings for Low Pressure AREAS OF APPLICATION Pneumatic, chemical and pharmacutical, medical and laboratory
Type 06-003, 07-003
MEDIA Water, compressed air, fuel, technical gases, acids and alkalines, other fluids
Partially squirt-free, automatic lock,protection caps and plugs+, one-hand

FEATURES
operation
SIZE (MM) 2.5, 3
06-003 HOUSING MATERIALS Nickel-plated brass, stainless steel 1.4404 /1.4571 (AISI 316 L / 316 Ti)
MAX. STATIC WORKING

Up to 2,900 psi*, for negative pressure when connected
PRESSURE CONNECTED
07-003 VALVE SYSTEMS
• Both sides self sealing • One side self sealing •Through type
AVAILABLE
Pneumatic, general engineering and systems constructions, chemical and pharma

AREAS OF APPLICATION
Low Pressure Universal Couplings industry, medical and laboratory technology
Water, compressed air, fuel, lubricants and oils, technical gases, acids and
Series LP + SP MEDIA
alkalines, other fluids
Partially squirt free, axial safety lock+ (SI), locking aid, automatic lock (for some
FEATURES
sizes), ring grips+, protection caps and plugs+
SIZE (MM) 3 ,4, 6, 7, 9, 12, 19, 32, 50
Zinc-plated steel, passivated brass, chrome-plated brass, stainless steel

HOUSING MATERIALS
1.4404/1.4571 (AISI 316 L/316 Ti) or equivalent
MAX. STATIC WORKING
Up to 2,900 psi*, for negative pressure when connected (except n. b. 32 / 50)
PRESSURE CONNECTED
VALVE SYSTEMS
• Both sides self sealing • One side self sealing • Through type
AVAILABLE
Air and liquid applications, Battery filling, Medical industry, Chemical industry,
Low Pressure Plastic Couplings AREAS OF APPLICATION
Laboratory technology
Series KL MEDIA Water, air, weak acids and alkalines
Low weight, axial safety lock (SI)+, weather and corrosion resistant, protection
FEATURES
caps and plugs+
SIZE (MM) 6, 12, 30
PA 11 / 12, PP, POM

HOUSING MATERIALS
MAX. STATIC WORKING

Up to 175* psi
PRESSURE CONNECTED
VALVE SYSTEMS
AVAILABLE
Technical gases, to differentiate supply and return lines, controls, welding

Non-interchangeable AREAS OF APPLICATION
gas connections
Low Pressure Couplings MEDIA Water, fluids, compressed air, technical gases (nitrogen, oxygen, etc), fuel gas
Series UF Non-interchangeable triangular or square profile, axial safety lock (SI)+, ring
FEATURES
grips+, protection caps+
SIZE (MM) 6, 7, 12, 19, 32
Passivated brass, chrome-plated brass, stainless steel 1.4404 / 1.4571

HOUSING MATERIALS
AISI 316 L / 316 Ti) or equivalent
MAX. STATIC WORKING
Up to 580 psi*, for negative pressure when connected (except n. b. 32)
PRESSURE CONNECTED
VALVE SYSTEMS
AVAILABLE
*Dependent on chosen materials and seals. +Feature is optional, consult factory for details.
866-FLANGES | 513.527.4444 | Fax 513.527.4449

QUICK COUPLINGS
TEST POINT
ADAPTERS
Couplings for Medium Pressure AREAS OF APPLICATION
Engineering, hydraulic controls, hydraulic tools, general line extension, fuel lines,
test connections for vehicle hydraulics, autoclaves
Series MD
MEDIA Hydraulic fluids, water, acids and alkalines, steam, gases
FEATURES Axial safety lock+, ring grips+, pressure-tight protection cap+
SIZE (MM) 6, 7, 12, 19, 25, 32, 50
VALVES
INLINE
Zinc-plated steel / oil- burnished steel, passivated brass, stainless steel
HOUSING MATERIALS
1.4404/1.4571 (AISI 316 L/316 Ti) or equivalent
MAX. STATIC WORKING
PRESSURE CONNECTED
VALVE SYSTEMS
Both sides self sealing, one side self sealing, through type
AVAILABLE
Couplings for High Pressure AREAS OF APPLICATION

High pressure hydraulics, engineering, autoclaves, high pressure test benches,
hydraulic clamping, offshore applications, core pulling hydraulics, nuclear power
VALVES
Series HP stations, steel work
BALL
MEDIA Hydraulic liquids, chemical substances, water, gases
Highest pressure resistance, robust construction, radial protection against

FEATURES
vibration, axial safety lock (SI)+, ring valves+
SIZE (MM) 2.5, 4, 6, 10, 16, 20, 32, 50
Oil-burnished steel, stainless steel 1.4404 /1.4571/1.4418 (AISI 316 L /316 Ti)
HOUSING MATERIALS
or equivalent
COUPLINGS
MAX. STATIC WORKING Up to 29,000 psi*, for negative pressure when connected (higher pressures
QUICK
PRESSURE CONNECTED upon request)
VALVE SYSTEMS
Both sides self sealing, one side self sealing, through type, ring valves
AVAILABLE
SPECIALTY COUPLINGS
Compressed Air Tool Couplings AREAS OF APPLICATION Tool connection, vehicle assembly
COUPLINGS
WELD
Series LT MEDIA Compressed air
Low weight, high flow rate, connectable with different adaptor systems,
FEATURES
scratch protection
SIZE (MM) 6.5, 9, 11
HOUSING MATERIALS Impact-resistant plastic/hard-coated aluminum
MAX. STATIC WORKING
AND RETURN
Up to 170 psi*
PRESSURE CONNECTED
SUCTION
VALVE SYSTEMS
One side self sealing
AVAILABLE
For almost all series: filling and emptying of tank facilities, filling of specialty
Emergency-Release Couplings AREAS OF APPLICATION
chemicals, vapor recovery pipes, loading technology rail/road
MEDIA Light acids and alkalines, speciality chemicals, fuels
Non-destructive separation of the line when exceeding a maximum permissible

FEATURES
tensile force, again available immediately, separation forces from 160 N*
FLANGES
SIZE (MM) 6 - 65
C/S
Steel chemically nickel-plated, passivated brass, hard-coated aluminum,

HOUSING MATERIALS
stainless steel 1.440/1.4571 (AISI 316 L/316 Ti)
MAX. STATIC WORKING
Up to 22,900 psi*
PRESSURE CONNECTED
Example VALVE SYSTEMS One or both-sides self sealing clean break technology (minimal loss or ingress
AVAILABLE during operation)
FLANGES
S/S
57
866-FLANGES | 513.527.4444 | Fax 513.527.4449
57
QUICK COUPLINGS
Dialysis Couplings AREAS OF APPLICATION Medical technology, connection to dialysis appliances and dialysis filters
Type 22-006
MEDIA Water, sterilization substances
onnectable with internationally standardized adaptors, FDA approved materials,

C
FEATURES
easy cleaning
SIZE (MM) 6
Polypropylene, PVDF, stainless steel 1.4404 /1.4571 (AISI 316 L /316 Ti) or
HOUSING MATERIALS
equivalent
MAX. STATIC WORKING
Up to 87 psi*
PRESSURE CONNECTED
VALVE SYSTEMS
One-sided self sealing, through type
AVAILABLE
AREAS OF APPLICATION Heating systems, mold heating, heat transfer systems

High Temperature Couplings
Series 11 MEDIA Thermal oil up to 590 °F
Squirt-free, double lever lock, designed to tolerate heavy contamination, special

FEATURES
seals, isolated grips and buttons. Hand grip optional.
SIZE (MM) 12, 19
HOUSING MATERIALS Heat resistant and burnished steel
MAX. STATIC WORKING

Up to 230 psi*
PRESSURE CONNECTED
VALVE SYSTEMS
Both sides self sealing
AVAILABLE
Cryogenic applications: research, development and laboratory technology,

Couplings for Cryogenics AREAS OF APPLICATION
recycling, production engineering, plastic processing, food industry, medicine
Series TT (WALcryo) MEDIA Cryogenic substances e.g. liquid nitrogen down to -196 °C
TT-009: Automatic lock by bajonet TT-013: Automatic lock with double

FEATURES
lever locking
SIZE (MM) 9, 13
TT-009
HOUSING MATERIALS Plastic, brass and stainless steel
MAX. STATIC WORKING

Up to 230 psi*
PRESSURE CONNECTED
VALVE SYSTEMS
TT-013 Through type, one side self sealing, n. b. 13 both sides self sealing
AVAILABLE
High Pressure Screw Type Couplings AREAS OF APPLICATION For offshore applications, diver operated
Series SH MEDIA Hydraulic liquids, water-soluble emulsions
Version -Y44: for hose extension, version -Y45: for panel mounting, connection/
FEATURES disconnection under pressure, squirt-free, bulkhead mounting available, pressure
tight caps+
SIZE (MM) 6, 10, 16, 25
HOUSING MATERIALS Stainless steel 1.4404 (AISI 316 L), bronze, duplex, nitronic 50
MAX. STATIC WORKING

Up to 15,000 psi*
PRESSURE CONNECTED
VALVE SYSTEMS
Both sides self sealing
AVAILABLE
866-FLANGES | 513.527.4444 | Fax 513.527.4449

QUICK COUPLINGS
TEST POINT
ADAPTERS
Universal Subassembly Elements AREAS OF APPLICATION General engineering, machine tool industry
Series 85, Series 57 MEDIA Hydraulic fluids, emulsions
artridge elements for customers’ cavities, squirt-free, high coupling frequency

C
FEATURES
possible, applicable for pressure difference up to 580 psi*, robust construction
SIZE (MM) Series 85: 6, 10, 57: 6, 8, 12, 16
VALVES
INLINE
Series 85: oil-burnished steel; plated steel, series 57: stainless steel
HOUSING MATERIALS
Series 57 1.4104 (AISI 430 F)
MAX. STATIC WORKING
Series 85: up to 3,480 psi*, series 57: up to 2,900 psi*
PRESSURE CONNECTED
VALVE SYSTEMS oth sides self sealing clean break technology (minimal loss or ingress
B
Series 85 AVAILABLE during operation)
CLEAN BREAK COUPLINGS
VALVES
BALL
General constructions, chemical industry, pharmaceutical industry, tank
Low Pressure Clean Break Couplings loading/unloading, engineering, thermal oil
Series CT MEDIA Water, oils, chemical fluids, non-lubricating substances, gases
Auto lock, squirt-free, low coupling force, connectable against residual pressures,
FEATURES
high flow rate, ring grips+, protection caps+
SIZE (MM) 3, 5, 7, 9, 12, 19
COUPLINGS
HOUSING MATERIALS Stainless steel 1.4307 (AISI 304 L)
QUICK
MAX. STATIC WORKING
Up to 930 psi*, for negative pressure when connected
PRESSURE CONNECTED
B
Chemical industry, pharmaceutical industry, vehicle loading/unloading, hose

Low Pressure Clean Break Couplings stations, cooling circuit
COUPLINGS
Series CN MEDIA Chemical fluids, non-lubricating substances, demineralized water, gases, solvents
WELD
Squirt-free, curved lock, connectable against residual pressure, compact design,
FEATURES
non-interchangeable design through mechanical coding+, ring grips+
SIZE (MM) 25, 40, 50, 80, 100
HOUSING MATERIALS Stainless steel 1.4571(AISI 316 Ti, Hastelloy)
MAX. STATIC WORKING

Up to 360 psi*, for negative pressure when connected
PRESSURE CONNECTED
AND RETURN
B
SUCTION
Low Pressure Clean Break Ball AREAS OF APPLICATION Chemical industry, pharmaceutical industry, tank filling, vehicle loading/unloading
Face Couplings MEDIA Chemical fluids, non-lubricating substances, demineralized water, gases, solvents
Series BF Squirt-free, automatic lock, connectable against residual pressure,

FEATURES precentered sleeve for easy operation, simple external cleaning by cleaning
FLANGES
position, additional seal prevents media from wetting the thread

C/S
SIZE (MM) 5, 9, 12
HOUSING MATERIALS Stainless steel 1.4404/1.4571 (AISI 316 L/316 Ti) or equivalent
MAX. STATIC WORKING

Up to 930 psi*
PRESSURE CONNECTED
VALVE SYSTEMS Both sides self sealing clean break technology (minimal loss or ingress
FLANGES
S/S
59
866-FLANGES | 513.527.4444 | Fax 513.527.4449
59
QUICK COUPLINGS
Low Pressure Clean Break Ball AREAS OF APPLICATION

Chemical industry, loading and unloading of vehicles, also top-loading, filling
plants and mixing stations, hose stations
Face Couplings
MEDIA Chemical fluids, non-lubricating substances, demineralized water, gases, solvents
Series BF (XL-Version)
squirt-free, separate connection and valve opening process, automatic locking
FEATURES with safety confirmation, valve opening possible even under high pressure, easy
to clean on the outside, safety operation (DN 25 + 50)
SIZE (MM) 25, 50
HOUSING MATERIALS Stainless steel 1.4404/1.4571 (AISI 316 L/316 Ti) or equivalent
MAX. STATIC WORKING

Up to 580 psi*
PRESSURE CONNECTED
VALVE SYSTEMS Both-sides self sealing clean break technology (minimal loss or ingress
Cooling of circuits in power modules (railway technology), proven in

Low Pressure Clean Break air-conditioning technology
Cartridge Elements MEDIA Water, polyalphyolefin (PAO), other coolants
Series CG Vibration resistance per EN 61373 category 1-3 class B (railway approved),
FEATURES individual dirt protection in connected position, anti-twisting device. Available as
hand operated version AND as cartridge version for automated connection.
SIZE (MM) 6, 9, 12,16, 20, 25
HOUSING MATERIALS Hard-coated aluminum, stainless steel 1.4307 (AISI 304L)
MAX. STATIC WORKING

Up to 230 psi*
PRESSURE CONNECTED
B
High pressure hydraulics, engineering, hydraulic units, high pressure test

High Pressure Clean Break Couplings benches, hydraulic controls, steel industry
Series HC MEDIA Hydraulic liquids on a mineral basis, HFA- and HFB liquids, self-lubricating media
Squirt-free, automatic lock, flat face closing valves, high pressure resistance,
FEATURES
pressure relief valve+, dirt protected lock, protection cap+
SIZE (MM) 6, 8, 12, 16, 20
Zinc-plated steel, yellow chromated / phosphated steel. stainless steel

HOUSING MATERIALS
1.4404/1.4418/1.4571 (AISI 316 L / 316 TI) or equivalent
MAX. STATIC WORKING
PRESSURE CONNECTED
VALVE SYSTEMS Both sides self sealing clean break technology (minimal loss or ingress
DUST PLUGS & CAPS

Accessories for Mono Couplings AREAS OF APPLICATION Dust caps and dust plugs, parking stations, threaded hose connectors, adaptor
Dust caps & Dust plugs
MEDIA According to basic type and resistance requirements
FEATURES Metal version = pressure-tight, plastic design = dirt protection
SIZE (MM) 4 -50 mm
HOUSING MATERIALS Steel, stainless steel, brass nickel-plated, PVC / PA / PUR
MAX. STATIC WORKING

Up to 29,000 psi*
PRESSURE CONNECTED
VALVE SYSTEMS
All protection caps and protection plugs with closed passage
AVAILABLE
866-FLANGES | 513.527.4444 | Fax 513.527.4449

QUICK COUPLINGS
TEST POINT
ADAPTERS
Notes
VALVES
INLINE
VALVES
BALL
COUPLINGS
QUICK
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
61
866-FLANGES | 513.527.4444 | Fax 513.527.4449
61
WELD
COUPLINGS
SAE Full Couplings 63
SAE Half Couplings 64
NPTF Half Couplings 65
NPTF Full Couplings 66
BSPP Half Couplings 66
BSPP Full Couplings 67
ISO 6149 Metric Couplings 68
Socket Weld Couplings 69
90 Degree Weld Couplings 70
866-FLANGES | 513.527.4444 | Fax 513.527.4449

WELD COUPLINGS
TEST POINT
ADAPTERS
SAE Full Couplings
VALVES
INLINE
SAE TO SAE FULL COUPLING
VALVES
STAINLESS D
CARBON STEEL
BALL
• AISI 1020 Carbon Steel PART NO.
STEEL
PART NO.
A B C SAE
UN-2B
• 316L Stainless Steel 830-4 830-4-SS 0.88 0.39 1.16 *7/16-20

830-6 830-6-SS 1.00 .509 1.25 *9/16-18
• Includes individual thread identification marking 830-8 830-8-SS 1.25 .689 1.63 *3/4-16
• Additional thread sizes and configurations available 830-10

830-12
830-10-SS
830-12-SS
1.38
1.50
.806
.981
1.50
2.06
*7/8-14
1 1/16-12
830-14 830-14-SS 1.63 1.106 2.00 1 3/16-12
COUPLINGS
830-16 830-16-SS 1.75 1.231 2.06 1 5/16-12
830-20 830-20-SS 2.25 1.544 2.06 1 5/8-12
QUICK
830-24 830-24-SS 2.75 1.794 2.20 1 7/8-12
830-32 830-32-SS 3.25 2.419 2.50 2 1/2-12
830-40 830-40-SS 3.75 2.92 3.00 3-12
830-48 830-48-SS 4.40 3.42 3.00 3 1/2-12
830-64 830-64-SS 5.25 4.42 3.25 4 1/2-12
*UNF-2B
COUPLINGS
WELD
AND RETURN
SUCTION
SAE TO NPTF FULL COUPLING
• AISI 1020 Carbon Steel STAINLESS F
CARBON STEEL G
• 316L Stainless Steel PART NO.
STEEL
PART NO.
A B C D E SAE
UN-2B
NPTF
• Includes individual thread 825-4

825-6
825-4-SS
825-6-SS
1.00
1.13
.389
.508
1.27
1.50
.64
.75
.875
1.000
*7/16-20
*9/16-18
1/4-18
3/8-18
identification marking 825-8 825-8-SS 1.25 .650 1.63 .82 1.125 *3/4-16 1/2-14
825-10-12 825-10-12-SS 1.50 .806 1.75 .88 1.375 *7/8-14 3/4-14
• Additional thread sizes and 825-12 825-12-SS 1.50 .850 2.06 1.03 1.375 1 1/16-12 3/4-14
configurations available 825-14-16 825-14-16-SS 1.75 1.050 2.15 1.08 1.625 1 3/16-12 1-11.5
FLANGES
825-16 825-16-SS 1.75 1.050 2.06 1.03 1.625 1 5/16-12 1-11.5

C/S
825-20 825-20-SS 2.25 1.420 2.06 1.03 2.125 1 5/8-12 1 1/4-11.5

825-24 825-24-SS 2.75 1.650 2.20 1.10 2.500 1 7/8-12 1 1/2-11.5
825-32 825-32-SS 3.25 2.125 2.50 1.25 3.000 2 1/2-12 2-11.5
825-40 825-40-SS 3.75 2.38 3.00 1.50 3.50 3-12 2 1/2-8
825-48 825-48-SS 4.40 3.00 3.00 1.50 4.00 3 1/2-12 3-8
825-64 825-64-SS 5.25 4.00 3.25 1.63 5.00 4 1/2-12 4-8
*UNF-2B
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

63
WELD COUPLINGS
SAE Half Couplings
SAE HALF COUPLING

• AISI 1020 Carbon Steel CARBON STEEL
STAINLESS
STEEL A B C D E
F
SAE
PART NO.
• 316L Stainless Steel 835-4
PART NO.
835-4-SS .88 .389 1.00 .250 .750
UN-2B
*7/16-20
• Includes individual thread 835-6 835-6-SS 1.00 .509 1.00 .250 .875 *9/16-18
835-8 835-8-SS 1.25 .689 1.06 .250 1.125 *3/4-16
identification marking 835-10 835-10-SS 1.38 .806 1.06 .250 1.250 *7/8-14
• Additional thread sizes and 835-12 835-12-SS 1.50 .981 1.28 .250 1.375 1 1/16-12
835-14 835-14-SS 1.63 1.106 1.25 .250 1.500 1 3/16-12
configurations available 835-16 835-16-SS 1.75 1.231 1.28 .250 1.625 1 5/16-12
835-20 835-20-SS 2.25 1.544 1.28 .250 2.125 1 5/8-12
835-24 835-24-SS 2.75 1.794 1.28 .250 2.500 1 7/8-12
835-32 835-32-SS 3.25 2.419 1.50 .250 3.000 2 1/2-12
835-40 835-40-SS 3.75 2.92 2.00 .250 3.500 3-12
835-48 835-48-SS 4.40 3.42 2.25 .250 4.000 3 1/2-12
835-64 835-64-SS 5.25 4.42 2.25 .250 5.000 4 1/2-12
*UNF-2B
SAE HALF COUPLING BEVEL
• AISI 1020 Carbon Steel CARBON STEEL

PART NO.
STAINLESS
STEEL A B C D
E
SAE
PART NO. UN-2B
• 316L Stainless Steel 835B-4 835B-4-SS .88 .389 1.00 .570 *7/16-20
• Includes individual thread 835B-6 835B-6-SS 1.00 .509 1.00 .690 *9/16-18
835B-8 835B-8-SS 1.25 .689 1.06 .870 *3/4-16
identification marking 835B-10 835B-10-SS 1.38 .806 1.06 .990 *7/8-14
• Additional thread sizes and 835B-12

835B-14
835B-12-SS
835B-14-SS
1.50
1.63
.981
1.106
1.28
1.25
1.160
1.290
1 1/16-12
1 3/16-12
configurations available 835B-16 835B-16-SS 1.75 1.231 1.28 1.410 1 5/16-12
835B-20 835B-20-SS 2.25 1.544 1.28 1.720 1 5/8-12
835B-24 835B-24-SS 2.75 1.794 1.28 1.980 1 7/8-12
835B-32 835B-32-SS 3.25 2.419 1.50 2.600 2 1/2-12
835B-40 835B-40-SS 3.75 2.92 2.00 3.000 3-12
835B-48 835B-48-SS 4.40 3.42 2.25 3.500 3 1/2-12
835B-64 835B-64-SS 5.25 4.42 2.25 4.500 4 1/2-12
*UNF-2B
866-FLANGES | 513.527.4444 | Fax 513.527.4449

WELD COUPLINGS
TEST POINT
ADAPTERS
NPTF Half Couplings
VALVES
INLINE
NPTF HALF COUPLING
VALVES
CARBON STAINLESS
BALL
F
STEEL STEEL A B C D E
NPTF
• AISI 1020 Carbon Steel PART NO.
845-4
PART NO.
845-4-SS .88 1.06 .250 .391 .750 1/4-18
• 316L Stainless Steel 845-6 845-6-SS 1.00 1.00 .250 .563 .875 3/8-18
• Includes individual thread 845-8 845-8-SS 1.25 1.06 .250 .650 1.125 1/2-14
845-12 845-12-SS 1.50 1.28 .250 .850 1.375 3/4-14
identification marking 845-16 845-16-SS 1.75 1.28 .250 1.050 1.625 1-11.5
• Additional thread sizes and 845-20 845-20-SS 2.25 1.28 .250 1.420 2.125 1 1/4-11.5
COUPLINGS
845-24 845-24-SS 2.75 1.28 .250 1.560 2.500 1 1/2-11.5
QUICK
configurations available 845-32 845-32-SS 3.25 1.50 .250 2.125 3.000 2-11.5
845-40 845-40-SS 3.75 2.00 .250 2.500 3.500 2 1/2-8
845-48 845-48-SS 4.25 2.25 .250 3.000 4.000 3-8
845-64 845-64-SS 5.25 2.25 .250 4.000 5.000 4-8
COUPLINGS
WELD
AND RETURN
SUCTION
NPTF HALF COUPLING BEVEL
• AISI 1020 Carbon Steel CARBON STAINLESS
E
STEEL STEEL A B C D
• 316L Stainless Steel PART NO. PART NO.
NPTF
• Includes individual thread 845B-4 845B-4-SS .88 1.06 .391 .570 1/4-18
845B-6 845B-6-SS 1.00 1.00 .520 .690 3/8-18
identification marking 845B-8 845B-8-SS 1.25 1.06 .650 .870 1/2-14
• Additional thread sizes and 845B-12 845B-12-SS 1.50 1.28 .850 1.160 3/4-14
845B-16 845B-16-SS 1.75 1.28 1.050 1.410 1-11.5
FLANGES
configurations available 845B-20 845B-20-SS 2.25 1.28 1.420 1.720 1 1/4-11.5

C/S
845B-24 845B-24-SS 2.75 1.28 1.560 1.980 1 1/2-11.5

845B-32 845B-32-SS 3.25 1.50 2.125 2.600 2-11.5
845B-40 845B-40-SS 3.75 2.00 2.500 3.100 2 1/2-8
845B-48 845B-48-SS 4.40 2.25 3.000 3.600 3-8
845B-64 845B-64-SS 5.25 2.25 4.000 4.450 4-8
FLANGES
S/S
65
866-FLANGES | 513.527.4444 | Fax 513.527.4449
65
WELD COUPLINGS
NPTF Full Couplings
NPTF TO NPTF FULL COUPLING

• AISI 1020 Carbon Steel CARBON STAINLESS
D
STEEL STEEL A B C
NPTF
• Includes individual thread 865-4 865-4-SS .88 .391 1.25 1/4-18

865-6 865-6-SS 1.00 .520 1.50 3/8-18
identification marking 865-8 865-8-SS 1.25 .650 1.85 1/2-14
• Additional thread sizes and 865-12 865-12-SS 1.50 .850 1.85 3/4-14
865-16 865-16-SS 1.75 1.050 2.35 1-11.5
configurations available 865-20 865-20-SS 2.25 1.420 2.35 1 1/4-11.5
865-24 865-24-SS 2.75 1.560 2.35 1 1/2-11.5
865-32 865-32-SS 3.25 2.125 2.35 2-11.5
BSPP Half Couplings
BSPP HALF COUPLING BEVEL

CARBON STAINLESS
E
•
STEEL STEEL A B C D
AISI 1020 Carbon Steel PART NO. PART NO.
BSPP
• 316L Stainless Steel 855B-4 855B-4-SS .88 .451 1.00 .570 1/4-19
855B-6 855B-6-SS 1.00 .589 1.00 .690 3/8-19
• Includes individual thread 855B-8 855B-8-SS 1.25 .734 1.06 .870 1/2-14
identification marking 855B-12 855B-12-SS 1.50 .949 1.28 1.160 3/4-14

855B-16 855B-16-SS 1.75 1.193 1.28 1.410 1-11
• Additional thread sizes and 855B-20 855B-20-SS 2.25 1.534 1.28 1.720 1 1/4-11
configurations available 855B-24 855B-24-SS 2.75 1.766 1.28 1.980 1 1/2-11
855B-32 855B-32-SS 3.25 2.231 1.50 2.600 2-11
866-FLANGES | 513.527.4444 | Fax 513.527.4449

WELD COUPLINGS
TEST POINT
ADAPTERS
BSPP Full Couplings
VALVES
INLINE
VALVES
BALL
• AISI 1020 Carbon Steel BSPP TO BSPP FULL COUPLING
CARBON STAINLESS
• 316L Stainless Steel STEEL STEEL A B C
D
BSPP
PART NO. PART NO.
• Includes individual thread 850-4 850-4-SS .88 .451 1.25 1/4-19
identification marking 850-6 850-6-SS 1.00 .589 1.25 3/8-19
850-8 850-8-SS 1.25 .734 1.63 1/2-14
• Additional thread sizes 850-12 850-12-SS 1.50 .949 2.06 3/4-14
COUPLINGS
and configurations available 850-16 850-16-SS 1.75 1.193 2.06 1-11
QUICK
850-20 850-20-SS 2.25 1.534 2.06 1 1/4-11
850-24 850-24-SS 2.75 1.766 2.20 1 1/2-11
850-32 850-32-SS 3.25 2.231 2.50 2-11
COUPLINGS
WELD
AND RETURN
SUCTION
BSPP TO NPTF FULL COUPLING
• AISI 1020 Carbon Steel CARBON
STEEL
STAINLESS
STEEL A B C D E
F G
BSPP NPTF
860-4 860-4-SS 1.00 .408 1.27 .64 .875 1/4-19 1/4-18
• Includes individual thread 860-6 860-6-SS 1.13 .507 1.50 .75 1.000 3/8-19 3/8-18
identification marking 860-8 860-8-SS 1.25 .650 1.63 .82 1.125 1/2-14 1/2-14
FLANGES
860-12 860-12-SS 1.50 .850 2.06 1.03 1.375 3/4-14 3/4-14

• Additional thread sizes and 860-16 860-16-SS 1.75 1.000 2.06 1.03 1.625 1-11 1-11.5
C/S
configurations available 860-20 860-20-SS 2.25 1.450 2.06 1.03 2.125 1 1/4-11 1 1/4-11.5
860-24 860-24-SS 2.75 1.681 2.20 1.10 2.500 1 1/2-11 1 1/2-11.5
860-32 860-32-SS 3.25 2.125 2.50 1.25 3.000 2-11 2-11.5
FLANGES
S/S
67
866-FLANGES | 513.527.4444 | Fax 513.527.4449
67
WELD COUPLINGS
ISO 6149 Metric Couplings
ISO 6149 TO NPTF FULL COUPLING

• AISI 1020 Carbon Steel STAINLESS F
CARBON STEEL G
• 316L Stainless Steel PART NO.
STEEL
PART NO.
A B C D E ISO 6149
METRIC
NPTF
• Includes individual thread 885-M27-12 885-M27-12-SS 1.50 .850 2.06 1.03 1.375 M27 X 2 3/4-14
885-M33-16 885-M33-16-SS 1.75 1.050 2.06 1.03 1.625 M33 X 2 1-11.5
identification marking 885-M42-20 885-M42-20-SS 2.25 1.420 2.06 1.03 2.125 M42 X 2 1 1/4-11.5
• Additional thread sizes and 885-M48-24 885-M48-24-SS 2.75 1.650 2.20 1.10 2.500 M48 X 2 1 1/2-11.5
885-M60-32 885-M60-32-SS 3.25 2.125 2.50 1.25 3.000 M60 X 2 2-11.5
configurations available
• AISI 1020 Carbon Steel ISO 6149 HALF COUPLING

• 316L Stainless Steel CARBON STEEL
STAINLESS
STEEL A B C D E
F
ISO 6149
PART NO.
• Includes individual thread PART NO. METRIC
880-M27 880-M27-SS 1.50 .981 1.28 .250 1.375 M27 X 2

identification marking 880-M33 880-M33-SS 1.75 1.231 1.28 .250 1.625 M33 X 2
• Additional thread sizes and 880-M42 880-M42-SS 2.25 1.544 1.28 .250 2.125 M42 X 2
880-M48 880-M48-SS 2.75 1.794 1.28 .250 2.500 M48 X 2
configurations available 880-M60 880-M60-SS 3.25 2.419 1.50 .250 3.000 M60 X 2
866-FLANGES | 513.527.4444 | Fax 513.527.4449

WELD COUPLINGS
TEST POINT
ADAPTERS
Socket Weld Couplings
VALVES
INLINE
• AISI 1020 Carbon Steel
VALVES
SAE TO SOCKET WELD PIPE COUPLING
BALL
• 316L Stainless Steel CARBON
STEEL
STAINLESS
STEEL A B C D E
F
SAE
PART NO. PART NO. UN-2B
• Includes individual thread 820-8 820-8-SS 1.25 1.63 .689 .560 .855 *3/4-16
identification marking 820-12 820-12-SS 1.50 2.06 .981 .560 1.062 1 1/16-12
820-16 820-16-SS 1.75 2.06 1.231 .630 1.328 1 5/16-12
• Additional thread sizes and 820-20 820-20-SS 2.25 2.06 1.544 .690 1.672 1 5/8-12
configurations available 820-24 820-24-SS 2.75 2.20 1.794 .750 1.922 1 7/8-12
COUPLINGS
820-32 820-32-SS 3.25 2.50 2.419 .875 2.406 2 1/2-12
QUICK
820-40 820-40-SS 3.75 3.00 2.919 1.000 2.910 3-12
820-48 820-48-SS 4.40 3.00 3.419 1.25 3.550 3 1/2-12
820-64 820-64-SS 5.25 3.25 4.419 1.250 4.55 4 1/2-12
*UNF-2B
COUPLINGS
WELD
AND RETURN
SUCTION
• AISI 1020 Carbon Steel SOCKET WELD PIPE TO MALE JIC COUPLING
• 316L Stainless Steel CARBON
STEEL
STAINLESS
STEEL A B C D E
F
FLANGES
THREAD
PART NO. PART NO.
• Includes individual thread
C/S
840-8 840-8-SS .391 1.63 .560 .855 1.25 *3/4-16

identification marking 840-12 840-12-SS .609 1.89 .560 1.062 1.50 1 1/16-12
840-16 840-16-SS .844 2.06 .630 1.328 1.75 1 5/16-12
• Additional thread sizes and 840-20 840-20-SS 1.078 2.06 .690 1.672 2.25 1 5/8-12
configurations available 840-24 840-24-SS 1.312 2.20 .750 1.922 2.75 1 7/8-12
840-32 840-32-SS 1.781 2.50 .875 2.406 3.25 2 1/2-12
*UNF-2A
FLANGES
S/S
69
866-FLANGES | 513.527.4444 | Fax 513.527.4449
69
WELD COUPLINGS
90 Degree Weld Couplings
• AISI 1020 Carbon Steel SAE TO WELD 90 DEGREE COUPLING

• Includes individual thread PART NUMBER A B C D E F G
H
SAE UN-2B
identification marking 83590-4 1.13 1.17 0.250 0.729 0.493 0.750 0.250 7/16-20*
83590-6 1.25 1.25 0.250 0.746 0.528 0.875 0.295 9/16-18*
• Additional thread sizes and 83590-8 1.75 1.53 0.250 0.907 0.646 1.125 0.394 3/4-16*
configurations available 83590-10 1.88 1.55 0.250 0.863 0.656 1.250 0.492 7/8-14*
83590-12 2.25 2.05 0.375 1.305 0.784 1.375 0.630 1 1/16-12
83590-14 2.38 1.96 0.375 1.143 0.791 1.500 0.709 1 3/16-12
83590-16 2.63 2.32 0.375 1.449 0.890 1.625 0.827 1 5/16-12
83590-20 3.13 2.75 0.375 1.622 1.067 2.125 1.062 1 5/8-12
83590-24 3.63 3.31 0.500 1.939 1.284 2.500 1.300 1 7/8-12
83590-32 4.63 4.00 0.500 2.374 1.532 3.000 1.770 2 1/2-12
*UNF-2B
• AISI 1020 Carbon Steel NPTF TO WELD 90 DEGREE COUPLING

H
• Includes individual thread PART NUMBER A B C D E F G
NPTF
identification marking 84590-4 1.13 1.17 0.250 0.729 0.481 0.750 0.250 1/4-18
84590-6 1.25 1.25 0.250 0.746 0.488 0.875 0.295 3/8-18
• Additional thread sizes and 84590-8 1.75 1.53 0.250 0.943 0.736 1.125 0.394 1/2-14
configurations available 84590-12 2.25 2.05 0.375 1.305 0.965 1.375 0.630 3/4-14
84590-16 2.63 2.32 0.375 1.449 1.114 1.625 0.827 1-11.5
84590-20 3.13 2.75 0.375 1.605 1.299 2.125 1.062 1 1/4-11.5
84590-24 3.63 3.31 0.500 1.939 1.520 2.500 1.300 1 1/2-11.5
84590-32 4.63 4.00 0.500 2.374 1.961 3.000 1.770 2-11.5
866-FLANGES | 513.527.4444 | Fax 513.527.4449

WELD COUPLINGS
TEST POINT
ADAPTERS
Notes
VALVES
INLINE
VALVES
BALL
COUPLINGS
QUICK
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
71
866-FLANGES | 513.527.4444 | Fax 513.527.4449
71
SUCTION
& RETURN
Hose Barb to SAE Flange Head 72
SAE Thread to Tank Coupling 74
SAE Thread to Flange Head 75
Hose Barb to SAE Thread 76
Suction and Return Line Valves 78
Hose Barb to SAE Flange Head

90º HOSE BARB TO SAE FLANGE HEAD
• Suction to 400 psi max HOSE
BARB SIZE
FLANGE
SIZE
A B C
HB
ID
FH
ID
SPLIT
FLANGE †
• Carbon steel natural finish 20HB-20SF90 1.25 1.25 4.64 3.14 2.00 1.03 1.28 20SFO
24HB-20SF90 1.50 1.25 4.64 3.14 2.00 1.28 1.28 20SFO
• Material certificates available upon request 20HB-24SF90 1.25 1.50 5.00 3.50 2.38 1.03 1.50 24SFO
24HB-24SF90 1.50 1.50 5.00 3.50 2.38 1.28 1.50 24SFO
• Flange head manufactured to SAE J518-1 32HB-24SF90 2.00 1.50 5.00 3.50 2.38 1.75 1.50 24SFO
40HB-24SF90 2.50 1.50 5.00 3.50 2.38 2.17 1.50 24SFO
24HB-32SF90 1.50 2.00 6.19 4.25 2.81 1.28 1.94 32SFO
32HB-32SF90 2.00 2.00 6.19 4.25 2.81 1.75 1.94 32SFO
40HB-32SF90 2.50 2.00 6.19 4.25 2.81 2.17 1.94 32SFO
48HB-32SF90 3.00 2.00 6.19 4.25 2.81 2.72 1.94 32SFO
24HB-40SF90 1.50 2.50 7.50 5.50 3.31 1.28 2.33 40SFO
32HB-40SF90 2.00 2.50 7.50 5.50 3.31 1.75 2.33 40SFO
40HB-40SF90 2.50 2.50 7.50 5.50 3.31 2.17 2.33 40SFO
48HB-40SF90 3.00 2.50 7.50 5.50 3.31 2.72 2.33 40SFO
64HB-40SF90 4.00 2.50 8.13 5.50 3.31 3.69 2.33 40SFO
32HB-48SF90 2.00 3.00 8.75 6.38 4.00 1.75 3.00 48SFO
40HB-48SF90 2.50 3.00 8.75 6.38 4.00 2.17 3.00 48SFO
48HB-48SF90 3.00 3.00 8.75 6.38 4.00 2.72 3.00 48SFO
64HB-48SF90 4.00 3.00 8.75 6.38 4.00 3.69 3.00 48SFO
64HB-56SF90 4.00 3.50 10.75 9.25 4.50 3.69 3.38 56SFO
40HB-64SF90 2.50 4.00 10.75 7.75 5.00 2.17 3.83 64SFO
48HB-64SF90 3.00 4.00 10.75 7.75 5.00 2.72 3.83 64SFO
64HB-64SF90 4.00 4.00 10.75 7.75 5.00 3.69 3.83 64SFO
† Optional Split Flange sold separately
866-FLANGES | 513.527.4444 | Fax 513.527.4449

SUCTION & RETURN
TEST POINT
ADAPTERS
45º HOSE BARB TO SAE FLANGE HEAD
HOSE FLANGE HB FH SPLIT
A B C
BARB SIZE SIZE ID ID FLANGE †
20HB-20SF45 1.25 1.25 2.66 4.91 2.00 1.03 1.28 20SFO
VALVES
INLINE
24HB-20SF45 1.50 1.25 2.66 4.91 2.00 1.28 1.28 20SFO
20HB-24SF45 1.25 1.50 2.74 5.11 2.38 1.03 1.50 24SFO
24HB-24SF45 1.50 1.50 2.74 5.11 2.38 1.28 1.50 24SFO
32HB-24SF45 2.00 1.50 2.74 5.11 2.38 1.75 1.50 24SFO
40HB-24SF45 2.50 1.50 2.74 5.11 2.38 2.17 1.50 24SFO
24HB-32SF45 1.50 2.00 3.23 5.86 2.81 1.28 1.94 32SFO
32HB-32SF45 2.00 2.00 3.23 5.86 2.81 1.75 1.94 32SFO
40HB-32SF45 2.50 2.00 3.23 5.86 2.81 2.17 1.94 32SFO
48HB-32SF45 3.00 2.00 3.23 5.86 2.81 2.72 1.94 32SFO
VALVES
24HB-40SF45 1.50 2.50 3.89 7.39 3.31 1.28 2.33 40SFO
BALL
32HB-40SF45 2.00 2.50 3.89 7.39 3.31 1.75 2.33 40SFO
40HB-40SF45 2.50 2.50 3.89 7.39 3.31 2.17 2.33 40SFO
48HB-40SF45 3.00 2.50 3.89 7.39 3.31 2.72 2.33 40SFO
64HB-40SF45 4.00 2.50 4.33 7.83 3.31 3.69 2.33 40SFO
32HB-48SF45 2.00 3.00 4.42 8.30 4.00 1.75 3.00 48SFO
• Suction to 400 psi max 40HB-48SF45 2.50 3.00 4.42 8.30 4.00 2.17 3.00 48SFO
48HB-48SF45 3.00 3.00 4.42 8.30 4.00 2.72 3.00 48SFO
• Carbon steel natural finish 64HB-48SF45 4.00 3.00 4.42 8.30 4.00 3.69 3.00 48SFO
COUPLINGS
• Material certificates available upon request 64HB-56SF45 4.00 3.50 5.13 10.88 4.50 3.69 3.38 56SFO
QUICK
40HB-64SF45 2.50 4.00 5.13 9.38 5.00 2.17 3.83 64SFO
• Flange head manufactured to SAE J518-1 48HB-64SF45 3.00 4.00 5.13 9.38 5.00 2.72 3.83 64SFO
64HB-64SF45 4.00 4.00 5.13 9.38 5.00 3.69 3.83 64SFO
COUPLINGS
STRAIGHT HOSE BARB TO SAE FLANGE HEAD
WELD
HOSE FLANGE HB FH SPLIT
A B
BARB SIZE SIZE ID ID FLANGE †
20HB-20SF 1.25 1.25 3.39 2.00 1.03 1.03 20SFO
24HB-20SF 1.50 1.25 3.39 2.00 1.25 1.25 20SFO
20HB-24SF 1.25 1.50 3.39 2.38 1.03 1.50 24SFO
24HB-24SF 1.50 1.50 3.50 2.38 1.28 1.28 24SFO
32HB-24SF 2.00 1.50 3.93 2.38 1.50 1.50 24SFO
40HB-24SF 2.50 1.50 4.63 2.38 2.17 1.50 24SFO
AND RETURN
24HB-32SF 1.50 2.00 3.93 2.81 1.28 2.00 32SFO
SUCTION
32HB-32SF 2.00 2.00 3.93 2.81 1.75 1.75 32SFO
40HB-32SF 2.50 2.00 4.63 2.81 2.00 2.00 32SFO
48HB-32SF 3.00 2.00 5.19 2.81 2.72 1.75 32SFO
24HB-40SF 1.50 2.50 4.63 3.31 1.28 2.50 40SFO
32HB-40SF 2.00 2.50 3.93 3.31 1.75 2.50 40SFO
40HB-40SF 2.50 2.50 4.63 3.31 2.17 2.17 40SFO
48HB-40SF 3.00 2.50 5.19 3.31 2.50 2.50 40SFO
64HB-40SF 4.00 2.50 6.50 3.31 3.69 2.38 40SFO
32HB-48SF 2.00 3.00 4.75 4.00 1.75 3.00 48SFO
FLANGES
40HB-48SF 2.50 3.00 4.63 4.00 2.17 3.00 48SFO

C/S
48HB-48SF 3.00 3.00 5.19 4.00 2.72 2.72 48SFO

64HB-48SF 4.00 3.00 5.83 4.00 3.69 3.00 48SFO
64HB-56SF 4.00 3.50 5.83 4.50 3.50 3.50 56SFO
40HB-64SF 2.50 4.00 5.83 5.00 2.17 3.69 64SFO
48HB-64SF 3.00 4.00 5.83 5.00 2.72 3.69 64SFO
64HB-64SF 4.00 4.00 5.83 5.00 3.69 3.69 64SFO
† Optional Split Flange sold separately

FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

73
SUCTION & RETURN
SAE Thread to Tank Coupling
• Suction to 400 psi max

• Buna seals standard / Viton optional
• Carbon steel natural finish
• 90° & 45° SAE thread with adjustable nut
• Material certificates available upon request
• SAE threads manufactured to J1926
90° SAE THREAD TO TANK COUPLING

E
LINE TANK B †
A C D (INTERNAL F ID BALL VALVE
SIZE PILOT (REF.)
THREAD)
20NPT-20SAE90 1.25 1.25 3.01 3.28 0.75 1.88 1 1/4-11.5 1 5/8-12 1.08 LV2BS#20-2T-MH
*24NPT-24SAE90 1.50 1.50 3.38 3.65 0.75 2.13 1 1/2-11.5 1 7/8-12 1.32 LV2BS#24-2T-MH
*32NPT-32SAE90 2.00 2.00 4.13 4.40 0.88 2.63 2-11.5 2 1/2-12 1.58 LV2BS#32-2T-MH
*40NPT-40SAE90 2.50 2.50 5.38 5.23 1.00 3.25 2 1/2-8 3-12 2.09 LV2BS#40-2T-MH
*48NPT-48SAE90 3.00 3.00 6.00 6.15 1.00 4.00 3-8 3 1/2-12 2.48 LV2BS#48-2T-MH
*64NPT-64SAE90 4.00 4.00 8.00 7.65 1.00 5.00 4-8 4 1/2-12 3.94 LV2BS#64-2T-MH
45° SAE THREAD TO TANK COUPLING

E
LINE TANK B †
A C D (INTERNAL F ID BALL VALVE
SIZE PILOT (REF.)
THREAD)
20NPT-20SAE45 1.25 1.25 1.51 3.96 0.75 1.88 1 1/4-11.5 1 5/8-12 1.08 LV2BS#20-2T-MH
*24NPT-24SAE45 1.50 1.50 1.60 4.17 0.75 2.13 1 1/2-11.5 1 7/8-12 1.32 LV2BS#24-2T-MH
*32NPT-32SAE45 2.00 2.00 1.77 4.60 0.88 2.63 2-11.5 2 1/2-12 1.58 LV2BS#32-2T-MH
*40NPT-40SAE45 2.50 2.50 2.39 5.68 1.00 3.25 2 1/2-8 3-12 2.09 LV2BS#40-2T-MH
*48NPT-48SAE45 3.00 3.00 2.48 6.18 1.00 4.00 3-8 3 1/2-12 2.48 LV2BS#48-2T-MH
*64NPT-64SAE45 4.00 4.00 3.18 7.39 1.00 5.00 4-8 4 1/2-12 3.94 LV2BS#64-2T-MH
STRAIGHT SAE THREAD TO TANK COUPLING

D
LINE TANK A †
B C (INTERNAL E ID BALL VALVE
SIZE PILOT (REF.)
THREAD)
20NPT-20SAE 1.25 1.25 1.38 0.75 1.88 1 1/4-11.5 1 5/8-12 1.08 LV2BS#20-2T-MH
*24NPT-24SAE 1.50 1.50 1.51 0.75 2.13 1 1/2-11.5 1 7/8-12 1.32 LV2BS#24-2T-MH
*32NPT-32SAE 2.00 2.00 1.51 0.88 2.63 2-11.5 2 1/2-12 1.58 LV2BS#32-2T-MH
*40NPT-40SAE 2.50 2.50 1.58 1.00 3.25 2 1/2-8 3-12 2.09 LV2BS#40-2T-MH
*48NPT-48SAE 3.00 3.00 1.65 1.00 4.00 3-8 3 1/2-12 2.48 LV2BS#48-2T-MH
*64NPT-64SAE 4.00 4.00 1.65 1.00 5.00 4-8 4 1/2-12 3.94 LV2BS#64-2T-MH
* Uses Adjustable Spanner

† Optional Ball Valve sold separately
866-FLANGES | 513.527.4444 | Fax 513.527.4449

SUCTION & RETURN
TEST POINT
ADAPTERS
SAE Thread to Flange Head
• Suction to 400 psi max

VALVES
INLINE
VALVES
BALL
90° SAE THREAD TO FLANGE HEAD
LINE FLANGE B † SPLIT
A C D ID BALL VALVE †
SIZE SIZE (REF.) FLANGE
20SF-20SAE90 1.25 1.25 3.13 3.28 2.00 1 5/8-12 1.08 LV2BS#20-2T-MH 20SFO
*24SF-24SAE90 1.50 1.50 3.50 3.65 2.38 1 7/8-12 1.32 LV2BS#24-2T-MH 24SFO
COUPLINGS
QUICK
*40SF-40SAE90 2.50 2.50 5.50 5.23 3.31 3-12 2.09 LV2BS#40-2T-MH 40SFO
COUPLINGS
45° SAE THREAD TO FLANGE HEAD
WELD
LINE FLANGE B † SPLIT
A C D ID BALL VALVE †
SIZE SIZE (REF.) FLANGE
20SF-20SAE45 1.25 1.25 1.59 4.00 2.00 1 5/8-12 1.08 LV2BS#20-2T-MH 20SFO
*40SF-40SAE45 2.50 2.50 2.48 5.68 3.31 3-12 2.09 LV2BS#40-2T-MH 40SFO
AND RETURN
SUCTION
STRAIGHT SAE THREAD TO FLANGE HEAD
LINE FLANGE † SPLIT
A B C D ID BALL VALVE †
SIZE SIZE FLANGE
**302-20-20 1.25 1.25 3.13 2.00 2.41 1 5/8-12 1.08 LV2BS#20-2T-MH 20SFO
**302-24-24 1.50 1.50 3.14 2.38 2.42 1 7/8-12 1.32 LV2BS#24-2T-MH 24SFO
**302-32-32 2.00 2.00 3.63 2.81 2.91 2 1/2-12 1.57 LV2BS#32-2T-MH 32SFO
FLANGES
**302-40-40 2.50 2.50 4.23 3.31 3.40 3-12 2.09 LV2BS#40-2T-MH 40SFO
C/S
**302-48-48 3.00 3.00 4.50 4.00 3.52 3 1/2-12 2.48 LV2BS#48-2T-MH 48SFO
**302-64-64 4.00 4.00 4.14 5.00 3.45 4 1/2-12 3.94 LV2BS#64-2T-MH 64SFO

** 302 Series Silver Trivalent Plated
† Optional Ball Valve & Split Flange sold separately
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

75
SUCTION & RETURN
Hose Barb to SAE Thread
• Suction to 400 PSI max

90° HOSE BARB TO SAE THREAD

HOSE
THREAD B †
BARB A C HB ID SAE ID BALL VALVE
SIZE (REF.)
SIZE
20HB-20SAE90 1.25 1.25 4.64 3.28 1 5/8-12 1.03 1.08 LV2BS#20-2T-MH
24HB-20SAE90 1.50 1.25 4.64 3.28 1 5/8-12 1.28 1.08 LV2BS#20-2T-MH
*20HB-24SAE90 1.25 1.50 5.00 3.65 1 7/8-12 1.03 1.32 LV2BS#24-2T-MH
*24HB-24SAE90 1.50 1.50 5.00 3.65 1 7/8-12 1.28 1.32 LV2BS#24-2T-MH
*32HB-24SAE90 2.00 1.50 5.00 3.65 1 7/8-12 1.75 1.32 LV2BS#24-2T-MH
*40HB-24SAE90 2.50 1.50 5.00 3.65 1 7/8-12 2.17 1.32 LV2BS#24-2T-MH
*24HB-32SAE90 1.50 2.00 6.19 4.40 2 1/2-12 1.28 1.58 LV2BS#32-2T-MH
*32HB-32SAE90 2.00 2.00 6.19 4.40 2 1/2-12 1.75 1.58 LV2BS#32-2T-MH
*40HB-32SAE90 2.50 2.00 6.19 4.40 2 1/2-12 2.17 1.58 LV2BS#32-2T-MH
*48HB-32SAE90 3.00 2.00 6.19 4.40 2 1/2-12 2.72 1.58 LV2BS#32-2T-MH
*24HB-40SAE90 1.50 2.50 7.50 5.23 3-12 1.28 2.09 LV2BS#40-2T-MH
*32HB-40SAE90 2.00 2.50 7.50 5.23 3-12 1.75 2.09 LV2BS#40-2T-MH
40HB-40SAE90 2.50 2.50 7.50 5.23 3-12 2.17 2.09 LV2BS#40-2T-MH
*48HB-40SAE90 3.00 2.50 7.50 5.23 3-12 2.72 2.09 LV2BS#40-2T-MH
*64HB-40SAE90 4.00 2.50 8.13 5.23 3-12 3.69 2.09 LV2BS#40-2T-MH
*32HB-48SAE90 2.00 3.00 8.75 6.15 3 1/2-12 1.75 2.48 LV2BS#48-2T-MH
*40HB-48SAE90 2.50 3.00 8.75 6.15 3 1/2-12 2.17 2.48 LV2BS#48-2T-MH
*48HB-48SAE90 3.00 3.00 8.75 6.15 3 1/2-12 2.72 2.48 LV2BS#48-2T-MH
*64HB-48SAE90 4.00 3.00 8.75 6.15 3 1/2-12 3.69 2.48 LV2BS#48-2T-MH
*40HB-64SAE90 2.50 4.00 10.75 7.65 4 1/2-12 2.17 3.94 LV2BS#64-2T-MH
*48HB-64SAE90 3.00 4.00 10.75 7.65 4 1/2-12 2.72 3.94 LV2BS#64-2T-MH
*64HB-64SAE90 4.00 4.00 10.75 7.65 4 1/2-12 3.69 3.94 LV2BS#64-2T-MH

866-FLANGES | 513.527.4444 | Fax 513.527.4449

SUCTION & RETURN
TEST POINT
ADAPTERS
45° HOSE BARB TO SAE THREAD
HOSE
THREAD B †
BARB A C HB ID SAE ID BALL VALVE
SIZE (REF.)
SIZE
20HB-20SAE45 1.25 1.25 2.66 5.06 1 5/8-12 1.03 1.08 LV2BS#20-2T-MH
24HB-20SAE45 1.50 1.25 2.66 5.06 1 5/8-12 1.28 1.08 LV2BS#20-2T-MH
*20HB-24SAE45 1.25 1.50 2.74 5.26 1 7/8-12 1.04 1.32 LV2BS#24-2T-MH
*24HB-24SAE45 1.50 1.50 2.74 5.26 1 7/8-12 1.28 1.32 LV2BS#24-2T-MH
VALVES
INLINE
*32HB-24SAE45 2.00 1.50 2.74 5.26 1 7/8-12 1.75 1.32 LV2BS#24-2T-MH
*40HB-24SAE45 2.50 1.50 2.74 5.26 1 7/8-12 2.17 1.32 LV2BS#24-2T-MH
*24HB-32SAE45 1.50 2.00 3.23 6.01 2 1/2-12 1.28 1.58 LV2BS#32-2T-MH
*32HB-32SAE45 2.00 2.00 3.23 6.01 2 1/2-12 1.75 1.58 LV2BS#32-2T-MH
*40HB-32SAE45 2.50 2.00 3.23 6.01 2 1/2-12 2.17 1.58 LV2BS#32-2T-MH
*48HB-32SAE45 3.00 2.00 3.23 6.01 2 1/2-12 2.72 1.58 LV2BS#32-2T-MH
*24HB-40SAE45 1.50 2.50 3.89 7.12 3-12 1.28 2.09 LV2BS#40-2T-MH
32HB-40SAE45 2.00 2.50 3.89 7.12 3-12 1.75 2.09 LV2BS#40-2T-MH
*40HB-40SAE45 2.50 2.50 3.89 7.12 3-12 2.17 2.09 LV2BS#40-2T-MH
VALVES
BALL
*48HB-40SAE45 3.00 2.50 3.89 7.12 3-12 2.72 2.09 LV2BS#40-2T-MH
*64HB-40SAE45 4.00 2.50 4.33 7.56 3-12 3.69 2.09 LV2BS#40-2T-MH
*32HB-48SAE45 2.00 3.00 4.42 8.07 3 1/2-12 1.75 2.48 LV2BS#48-2T-MH
*40HB-48SAE45 2.50 3.00 4.42 8.07 3 1/2-12 2.17 2.48 LV2BS#48-2T-MH
*48HB-48SAE45 3.00 3.00 4.42 8.07 3 1/2-12 2.72 2.48 LV2BS#48-2T-MH
*64HB-48SAE45 4.00 3.00 4.42 8.07 3 1/2-12 3.69 2.48 LV2BS#48-2T-MH
*40HB-64SAE45 2.50 4.00 5.13 9.28 4 1/2-12 2.17 3.94 LV2BS#64-2T-MH
*48HB-64SAE45 3.00 4.00 5.13 9.28 4 1/2-12 2.72 3.94 LV2BS#64-2T-MH
COUPLINGS
*64HB-64SAE45 4.00 4.00 5.13 9.28 4 1/2-12 3.69 3.94 LV2BS#64-2T-MH
QUICK
STRAIGHT HOSE BARB TO SAE THREAD
HOSE
THREAD †
BARB A B C HB ID SAE ID BALL VALVE
SIZE
SIZE
20HB-20SAE 1.25 1.25 2.00 3.01 1 5/8-12 1.03 1.08 LV2BS#20-2T-MH
24HB-20SAE 1.50 1.25 2.00 3.01 1 5/8-12 1.28 1.08 LV2BS#20-2T-MH
COUPLINGS
20HB-24SAE 1.25 1.50 2.50 3.01 1 7/8-12 1.03 1.14 LV2BS#24-2T-MH
WELD
24HB-24SAE 1.50 1.50 2.50 3.01 1 7/8-12 1.28 1.32 LV2BS#24-2T-MH
32HB-24SAE 2.00 1.50 2.50 3.45 1 7/8-12 1.75 1.32 LV2BS#24-2T-MH
40HB-24SAE 2.50 1.50 2.50 3.97 1 7/8-12 2.17 1.32 LV2BS#24-2T-MH
24HB-32SAE 1.50 2.00 3.25 3.01 2 1/2-12 1.28 1.58 LV2BS#32-2T-MH
32HB-32SAE 2.00 2.00 3.25 3.45 2 1/2-12 1.58 1.58 LV2BS#32-2T-MH
40HB-32SAE 2.50 2.00 3.25 3.97 2 1/2-12 2.17 1.58 LV2BS#32-2T-MH
48HB-32SAE 3.00 2.00 3.25 4.59 2 1/2-12 2.72 1.58 LV2BS#32-2T-MH
AND RETURN
24HB-40SAE 1.50 2.50 3.75 3.05 3-12 1.28 2.56 LV2BS#40-2T-MH
SUCTION
32HB-40SAE 2.00 2.50 3.75 3.49 3-12 1.75 2.56 LV2BS#40-2T-MH
40HB-40SAE 2.50 2.50 3.75 4.01 3-12 2.09 2.09 LV2BS#40-2T-MH
48HB-40SAE 3.00 2.50 3.75 4.63 3-12 2.72 2.56 LV2BS#40-2T-MH
64HB-40SAE 4.00 2.50 3.75 5.13 3-12 3.69 2.56 LV2BS#40-2T-MH
32HB-48SAE 2.00 3.00 4.50 3.49 3 1/2-12 1.75 2.95 LV2BS#48-2T-MH
40HB-48SAE 2.50 3.00 4.50 4.01 3 1/2-12 2.17 2.95 LV2BS#48-2T-MH
48HB-48SAE 3.00 3.00 4.50 4.63 3 1/2-12 2.48 2.48 LV2BS#48-2T-MH
64HB-48SAE 4.00 3.00 4.50 5.13 3 1/2-12 3.69 2.95 LV2BS#48-2T-MH
40HB-64SAE 2.50 4.00 5.50 4.01 4 1/2-12 2.17 3.94 LV2BS#64-2T-MH
FLANGES
48HB-64SAE 3.00 4.00 5.50 4.63 4 1/2-12 2.72 3.94 LV2BS#64-2T-MH

C/S
64HB-64SAE 4.00 4.00 5.50 5.13 4 1/2-12 3.69 3.94 LV2BS#64-2T-MH

FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

77
SUCTION & RETURN
Suction and Return Line Valves

• Locking handle standard
• Bracket designed to support limit switch or proximity sensor
• Prox is M12 4-Pin connector, normally open, and VDC only
• Limit can be wired VDC or VAC and normally open or
normally closed
• Both limit and prox have IP67 rating
LV2B SERIES - SAE

PSI
SIZE A B C D E F G ID
MAX
1" 1000 5.00 2.90 3.60 2.45 2.50 3.25 2.07 0.98
1-1/4" 1000 5.15 2.95 3.95 2.45 2.85 3.10 2.36 1.26
1-1/2" 1000 6.10 2.96 4.24 2.38 3.28 3.97 2.77 1.50
2" 1000 6.10 2.91 4.88 2.38 3.53 4.34 3.50 1.97
2-1/2" 1000 9.06 2.86 6.30 2.84 4.18 5.20 4.53 2.56
3" 1000 9.06 2.91 7.26 3.07 4.70 5.71 5.35 3.15
4" 500 13.00 2.90 8.80 3.11 6.10 7.11 7.02 3.93
*For Technical and Material info refer to page 52
LV2BS#16 - 2T - MHS
B: Bracket only, No Limit Switch or Proximity Sensor
S: Bracket and Limit Switch
P: Bracket and Proximity Sensor
Omit: No bracket, Limit Switch, or Proximity Sensor
THREAD SIZE
866-FLANGES | 513.527.4444 | Fax 513.527.4449

SUCTION & RETURN
TEST POINT
ADAPTERS
Notes
VALVES
INLINE
VALVES
BALL
COUPLINGS
QUICK
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
79
866-FLANGES | 513.527.4444 | Fax 513.527.4449
79
FLANGES –
CARBON STEEL
866-FLANGES | 513.527.4444 | Fax 513.527.4449

FLANGES – CARBON STEEL
TEST POINT
ADAPTERS
SAE J518 Split/Captive Flanges
For SAE Flanged Head Connection
CD 61 - CD 62 84
Split Flange Adapters
CD 61 - CD 62 JIC Thread 85
CD 61 - CD 62 SAE Straight Thread 85
VALVES
INLINE
CD 61 - CD 62 ORFS Thread 86
CD 61 - CD 62 45° Elbow JIC Thread 86
CD 61 - CD 62 45° Elbow ORFS Thread 86
CD 61 - CD 62 90° Elbow JIC Thread 87
CD 61 - CD 62 90° Elbow ORFS Thread 87
CD 61 Flange Head X Flange Head 88
CD 61 Butt Weld-Sched 40/Sched 80/Sched 160 89
CD 62 Butt Weld-Sched 80/Sched 160/Sched XXS 90
CD 61 - CD 62 Socket Weld 91
VALVES
CD 61 NPTF Thread 91
BALL
CD 61 SAE Thread 91
CD 61 - CD 62 Tube Flange Head Fitting 92
CD 61 - CD 62 Braze-On 93
CD 61 - JIC Braze-On 94
CD 61 - Cat-Style Split Flanges 94
CD 61 - Cat-Style JIC Thread Flange Adapter 95
CD 61 - CD 62 Flange Plug 96
CD 61 - Cat-Style Flange Plug 96
COUPLINGS
QUICK
SAE 4 Bolt Flanges
CD 61 - CD 62 Spacer Blocks with Gauge Port 99
CD 61 - CD 62 Blanking 102
CD 61 - CD 62 NPTF 104
CD 61 - CD 62 SAE Thread 105
CD 61 - CD 62 BSPP Thread 106
CD 61 - CD 62 Male JIC 107
CD 61 - CD 62 Male ORFS 108
CD 61 - CD 62 Flat Socket Weld Pipe 109
COUPLINGS
CD 61 - CD 62 Flat Socket Weld Tube 110
WELD
CD 61 - CD 62 Deep Socket Weld Pipe 111
CD 61 - CD 62 Deep Socket Weld Tube 112
CD 61 Saddle Weld 115
CD 61 Tank Pilot 116
CD 61 - CD 62 Elbow Block 117
CD 61 - CD 62 Elbow NPTF & SAE Thread 119
AND RETURN
CD 61 Elbow Socket Weld Pipe 120
SUCTION
CD 62 Elbow Socket Weld Tube 121
Square 4 Bolt Flanges

3000 Series Flat Socket Weld 122
3000 Series NPTF Thread 122
Miscellaneous Components
CAT-Style Split Flange 95
CD 61 - CD 62 Braze-On ORFS Thread 93
FLANGES
CD 61 - CD 62 Braze-On JIC Thread 94

C/S
CD 61 - CD 62 Connector Plates 97
CD 61 - CD 62 Connector Blocks 97
CD 61 - CD 62 Double O-Ring Union 98
CD 61 - CD 62 Orifice Plate 100
CD 61 - CD 62 Bolt Pattern Adapter 101
CD 61 - CD 62 Shipping Plates 103
CD 61 - CD 62 Tee Junction Block 118
O-Rings 139
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

81
Ordering System
SPLIT FLANGE ADAPTERS

Code
3 = Code 61
6 = Code 62
Straight, 45°, or 90° Angle

0 = Straight
4 = 45° Angle
9 = 90° Angle
Thread Configuration
0 = JIC (SAE J514)
2 = SAE Straight Thread (SAE J1926-2)
4 = ORFS (SAE J1453, Style B)
Thread Size - 1/16” units
Flange Head Size - 1/16” units
300-12-12
For additional jump sizes, please consult factory.
FLANGES
Our basic part numbering system is simple to use. The explanation of our part numbering system is detailed below. The series
number provides the greatest amount of information pertaining to the flange product. The port size and pad size simply refer
to size only, with all sizes based on 1/16 of an inch.
W4 - 20 - 24
SERIES NUMBER
• CODE 61
Port Size Pad Size
• Flat Socket Weld
1.25” 1.50”
• O-Ring
• Pipe
NOTE #1 – All items available with mounting kit by simply adding suffix letter “U”.
NOTE #2 – All items available in stainless steel material by simply adding the suffix letters “SS”.
NOTE #3 – All items available with metric mounting holes simply by adding the appropriate suffix (IE: M10, M12, etc.).
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
General Information
SPLIT FLANGE CLAMP
Clean the sealing surfaces and make certain they
VALVES
INLINE
are free from nicks, scratches and burrs. Foreign
material prevents a proper seal.
Lubricate the o-ring and ensure that it is properly

installed as to prevent damage during installation.
VALVES
BALL
PRESSURE RATINGS OF SAE FLANGES
CODE 61 SAE J518-1 / ISO 6162-1
COUPLINGS
MAX WORKING GRADE 8 AND EQUIVALENT FASTENER
QUICK
PRESSURE TORQUE VALUE
Push the flange clamps towards the flange head
and screw fasteners into flange pad. Continue to SOCKET HEAD UNC HEX HEAD UNC
DASH SIZE INCH SIZE PSI MPA (LB-FT) (LB-FT)
screw the fasteners until their heads just meet the -8 1/2” 5000 35 24 18
split flange surface. -12 3/4” 5000 35 44 33
-16 1” 4600 32 44 33
-20 1 1/4” 4000 28 68 52
-24 1 1/2” 3000 21 111 80
-32 2” 3000 21 111 80
-40 2 1/2” 2500 17.5 111 80
COUPLINGS
-48 3” 2300 16 218 160
WELD
-56 3 1/2” 500 3.5 218 160
-64 4” 500 3.5 218 160
-80 5” 500 3.5 218 160
CODE 62 SAE J518-2 / ISO 6162-2

Torque the fasteners in diagonal sequence, in small
increments, until final torque level is achieved. MAX WORKING GRADE 8 AND EQUIVALENT FASTENER TORQUE
PRESSURE VALUE
Torque values for flange connections listed above.
AND RETURN
Notice that the torque values vary according to size
SUCTION
SOCKET HEAD UNC HEX HEAD UNC
and fastener type. DASH SIZE INCH SIZE PSI MPA (LB-FT) (LB-FT)
-8 1/2” 6000 40 24 18
-12 3/4” 6000 40 44 33
Anchor Fluid Power split flange connections are -16 1” 6000 40 68 52
-20 1 1/4” 6000 40 111 80
manufactured according to SAE J518-1 and -2, -24 1 1/2” 6000 40 218 160
as well as ISO 6162-1 and -2. These standards -32 2” 6000 40 332 281
-40 2 1/2” 6000 40 N/A 605
control dimensions, tolerances and plating. Please -48 3” 6000 40 N/A 1280
note that the above pressure rating chart refers to
FLANGES
the flange connection. Adapting the flange to other **All max working pressures listed above are specific to the SAE J518/ISO 6162
C/S
connections, such as braze tube, welded pipe, or bolt pattern. Features within the 4-Bolt flange and the connection opposite the
4-Bolt flange can de-rate the maximum working pressure.
threaded ports / stud ends, could reduce maximum
working pressure. NOTE - All carbon steel torque values are based on
Please consult with Anchor Fluid Power for pressure AFP supplied socket head and hex head fasteners.
Use of alternate fasteners can affect torque value.
rating specific to your connection requirement. Consult factory for additional information.
FLANGES
S/S
83
866-FLANGES | 513.527.4444 | Fax 513.527.4449
83
J518 Split & Captive Flange

CODE 61 SPLIT FLANGE
MOUNTING
**KIT FLANGE HARDWARE
*PART NO. A B C D E F G H J
PART NO. SIZE
O-RING HHCS
8SF-2 8SFO .50 .86 2.12 1.500 .75 .50 1.219 .955 .245 .350 210 5/16-18X1.25
12SF-2 12SFO .75 .98 2.56 1.875 .88 .56 1.531 1.265 .245 .417 214 3/8-16X1.25
16SF-2 16SFO 1.00 1.11 2.75 2.062 .94 .62 1.781 1.515 .295 .417 219 3/8-16X1.25
20SF-2 20SFO 1.25 1.39 3.12 2.312 .88 .56 2.031 1.720 .295 .472 222 7/16-14X1.50
24SF-2 24SFO 1.50 1.58 3.69 2.750 1.00 .62 2.406 2.000 .295 .524 225 1/2-13X1.50
32SF-2 32SFO 2.00 1.86 4.00 3.062 1.03 .62 2.844 2.470 .355 .524 228 1/2-13X1.50
40SF-2 40SFO 2.50 2.09 4.50 3.500 1.50 .75 3.344 2.950 .355 .524 232 1/2-13X1.75
48SF-2 48SFO 3.00 2.53 5.31 4.188 1.62 .88 4.031 3.580 .355 .657 237 5/8-11X1.75
56SF-2 56SFO 3.50 2.70 6.00 4.750 1.12 .88 4.531 4.030 .422 .657 241 5/8-11X2.00
64SF-2 64SFO 4.00 2.95 6.38 5.125 1.38 1.00 5.031 4.530 .422 .657 245 5/8-11X2.00

MOUNTING
PART NO. SIZE
O-RING HHCS
8SFX-2 8SFXO .50 .89 2.22 1.594 .88 .62 1.281 .970 .285 .350 210 5/16-18X1.25
12SFX-2 12SFXO .75 1.14 2.81 2.000 1.12 .75 1.656 1.280 .325 .417 214 3/8-16X1.50
16SFX-2 16SFXO 1.00 1.33 3.19 2.250 1.31 .94 1.906 1.530 .355 .472 219 7/16-14X1.75
20SFX-2 20SFXO 1.25 1.48 3.75 2.625 1.50 1.06 2.156 1.750 .385 .524 222 1/2-13X1.75
24SFX-2 24SFXO 1.50 1.83 4.44 3.125 1.69 1.19 2.531 2.030 .475 .657 225 5/8-11X2.25
32SFX-2 32SFXO 2.00 2.20 5.25 3.812 2.06 1.44 3.156 2.660 .475 .811 228 3/4-10X2.75
*Anchor part # includes: (1) split flange half only

**Kit part # includes: (2) split flange halves, (4) hex head screws with flat washers, (1) Buna N O-Ring
Split flange halves are silver trivalent plated
CODE 61 CAPTIVE FLANGE

DRILLED TAPPED FLANGE K
A B C D E F G H J K
PART NO. PART NO. SIZE UNC-2B
8SFW 8SFTW .50 1.81 2.12 .688 1.500 .75 .50 1.219 .955 .245 .344 5/16-18
12SFW 12SFTW .75 2.06 2.56 .875 1.875 .88 .56 1.531 1.265 .245 .406 3/8-16
16SFW 16SFTW 1.00 2.31 2.75 1.031 2.062 .94 .62 1.781 1.515 .295 .406 3/8-16
20SFW 20SFTW 1.25 2.88 3.12 1.188 2.312 .88 .56 2.031 1.720 .295 .469 7/16-14
24SFW 24SFTW 1.50 3.25 3.69 1.406 2.750 1.00 .62 2.406 2.000 .295 .531 1/2-13
32SFW 32SFTW 2.00 3.81 4.00 1.688 3.062 1.03 .62 2.844 2.470 .355 .531 1/2-13
40SFW 40SFTW 2.50 4.28 4.50 2.000 3.500 1.50 .75 3.344 2.950 .355 .531 1/2-13
48SFW 48SFTW 3.00 5.16 5.31 2.438 4.188 1.62 .88 4.031 3.580 .355 .656 5/8-11
56SFW 56SFTW 3.50 5.50 6.00 2.750 4.750 1.12 .88 4.531 4.030 .422 .656 5/8-11
64SFW 64SFTW 4.00 6.00 6.38 3.062 5.125 1.38 1.00 5.031 4.530 .422 .656 5/8-11

A B C D E F G H J K
8SFXW 8SFXTW .50 1.86 2.22 .718 1.594 .88 .62 1.281 .970 .285 .344 5/16-18
12SFXW 12SFXTW .75 2.38 2.81 .937 2.000 1.12 .75 1.656 1.280 .325 .406 3/8-16
16SFXW 16SFXTW 1.00 2.75 3.19 1.093 2.250 1.31 .94 1.906 1.530 .355 .469 7/16-14
20SFXW 20SFXTW 1.25 3.06 3.75 1.250 2.625 1.50 1.06 2.156 1.750 .385 .531 1/2-13
24SFXW 24SFXTW 1.50 3.75 4.44 1.437 3.125 1.69 1.19 2.531 2.030 .475 .656 5/8-11
32SFXW 32SFXTW 2.00 4.50 5.25 1.750 3.812 2.06 1.44 3.156 2.660 .475 .781 3/4-10
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
JIC THREAD
VALVES
INLINE
CODE 61 JIC THREAD CODE 62 JIC THREAD
TUBE FLANGE TUBE FLANGE
PART NO. A B C THREAD PART NO. A B C THREAD
O.D. SIZE O.D. SIZE
300-8-8 1/2 1/2 2.60 1.188 1.94 3/4-16 600-8-8 1/2 1/2 2.61 1.250 1.95 3/4-16
300-8-12 1/2 3/4 2.75 1.500 2.09 3/4-16 600-12-12 3/4 3/4 2.75 1.625 1.89 1 1/16-12
300-12-12 3/4 3/4 2.75 1.500 1.89 1 1/16-12 600-16-12 1 3/4 2.75 1.625 1.84 1 5/16-12
VALVES
300-16-12 1 3/4 2.75 1.500 1.84 1 5/16-12 600-20-12 1 1/4 3/4 3.05 1.625 2.09 1 5/8-12
BALL
300-12-16 3/4 1 2.80 1.750 1.94 1 1/16-12 600-12-16 3/4 1 2.80 1.875 1.94 1 1/16-12
300-16-16 1 1 2.80 1.750 1.89 1 5/16-12 600-16-16 1 1 2.80 1.875 1.89 1 5/16-12
300-20-16 1 1/4 1 2.80 1.750 1.84 1 5/8-12 600-20-16 1 1/4 1 2.80 1.875 1.84 1 5/8-12
300-12-20 3/4 1 1/4 2.80 2.000 1.94 1 1/16-12 600-16-20 1 1 1/4 3.05 2.125 2.14 1 5/16-12
300-16-20 1 1 1/4 2.80 2.000 1.89 1 5/16-12 600-20-20 1 1/4 1 1/4 3.05 2.125 2.09 1 5/8-12
300-20-20 1 1/4 1 1/4 2.80 2.000 1.84 1 5/8-12 600-24-20 1 1/2 1 1/4 3.30 2.125 2.22 1 7/8-12
300-24-20 1 1/2 1 1/4 3.40 2.000 2.32 1 7/8-12 600-16-24 1 1 1/2 3.33 2.500 2.42 1 5/16-12
300-16-24 1 1 1/2 3.33 2.380 2.42 1 5/16-12 600-20-24 1 1/4 1 1/2 3.50 2.500 2.54 1 5/8-12
COUPLINGS
300-20-24 1 1/4 1 1/2 3.38 2.375 2.42 1 5/8-12 600-24-24 1 1/2 1 1/2 3.50 2.500 2.42 1 7/8-12
QUICK
300-24-24 1 1/2 1 1/2 3.50 2.375 2.42 1 7/8-12 600-32-24 2 1 1/2 4.94 2.500 3.61 2 1/2-12
300-32-24 2 1 1/2 4.20 2.375 2.87 2 1/2-12 600-24-32 1 1/2 2 3.98 3.125 2.89 1 7/8-12
300-20-32 1 1/4 2 3.60 2.810 2.64 1 5/8-12 600-32-32 2 2 4.23 3.125 2.89 2 1/2-12
300-24-32 1 1/2 2 3.73 2.812 2.64 1 7/8-12
300-32-32 2 2 3.98 2.812 2.64 2 1/2-12
300-32-40 2 2 1/2 3.98 3.312 2.64 2 1/2-12
SAE STRAIGHT THREAD
COUPLINGS
WELD
CODE 61 SAE STRAIGHT THREAD CODE 62 SAE STRAIGHT THREAD
AND RETURN
O.D. SIZE O.D. SIZE
SUCTION
302-8-8 1/2 1/2 2.49 1.188 1.94 3/4-16 602-8-8 1/2 1/2 2.50 1.250 1.95 3/4-16
302-12-12 3/4 3/4 2.61 1.500 1.89 1 1/16-12 602-12-12 3/4 3/4 2.62 1.625 1.89 1 1/16-12
302-16-12 1 3/4 2.88 1.500 2.16 1 5/16-12 602-16-12 1 3/4 2.88 1.625 2.15 1 5/16-12
302-12-16 3/4 1 2.74 1.750 2.02 1 1/16-12 602-12-16 3/4 1 2.75 1.875 2.02 1 1/16-12
302-16-16 1 1 2.61 1.750 1.89 1 5/16-12 602-16-16 1 1 2.62 1.875 1.89 1 5/16-12
302-20-16 1 1/4 1 3.13 1.750 2.41 1 5/8-12 602-20-16 1 1/4 1 3.44 1.875 2.71 1 5/8-12
302-16-20 1 1 1/4 2.74 2.000 2.02 1 5/16-12 602-16-20 1 1 1/4 3.12 2.125 2.39 1 5/16-12
302-20-20 1 1/4 1 1/4 3.13 2.000 2.41 1 5/8-12 602-20-20 1 1/4 1 1/4 3.00 2.125 2.27 1 5/8-12
302-24-20 1 1/2 1 1/4 3.43 2.000 2.71 1 7/8-12 602-24-20 1 1/2 1 1/4 3.44 2.125 2.71 1 7/8-12
602-20-24 1 1/4 1 1/2 3.31 2.500 2.58 1 5/8-12
FLANGES
302-16-24 1 1 1/2 3.30 2.380 2.58 1 5/16-12

302-20-24 1 1/4 1 1/2 3.30 2.375 2.58 1 5/8-12 602-24-24 1 1/2 1 1/2 3.19 2.500 2.46 1 7/8-12
C/S
302-24-24 1 1/2 1 1/2 3.14 2.375 2.42 1 7/8-12 602-24-32 1 1/2 2 3.90 3.125 3.17 1 7/8-12
302-24-32 1 1/2 2 3.79 2.812 3.07 1 7/8-12 602-32-32 2 2 3.75 3.125 3.02 2 1/2-12
302-32-32 2 2 3.63 2.812 2.91 2 1/2-12
302-40-40 2 1/2 2 1/2 4.23 3.310 3.08 3-12
302-48-48 3 3 4.50 4.000 3.36 3 1/2-12
302-64-64 4 4 4.14 5.000 2.89 4 1/2-12
FLANGES
S/S
85
866-FLANGES | 513.527.4444 | Fax 513.527.4449
85
Threaded
ORFS THREAD
CODE 62 ORFS THREAD

CODE 61 ORFS THREAD PART NO.
TUBE FLANGE
A B C THREAD
TUBE FLANGE O.D. SIZE
PART NO. A B C THREAD
O.D. SIZE 604-8-8 1/2 1/2 2.58 1.250 2.08 13/16-16
304-12-12 3/4 3/4 2.75 1.500 2.08 1 3/16-12 604-12-12 3/4 3/4 2.75 1.625 2.08 1 3/16-12
304-16-12 1 3/4 2.75 1.500 2.06 1 7/16-12 604-16-12 1 3/4 2.75 1.625 2.06 1 7/16-12
304-12-16 3/4 1 2.80 1.750 2.13 1 3/16-12 604-12-16 3/4 1 2.80 1.875 2.13 1 3/16-12
304-16-16 1 1 2.80 1.750 2.11 1 7/16-12 604-16-16 1 1 2.80 1.875 2.11 1 7/16-12
304-20-16 1 1/4 1 2.80 1.750 2.11 1 11/16-12 604-20-16 1 1/4 1 3.20 1.875 2.51 1 11/16-12
304-16-20 1 1 1/4 2.80 2.000 2.11 1 7/16-12 604-16-20 1 1 1/4 3.05 2.125 2.36 1 7/16-12
304-20-20 1 1/4 1 1/4 2.80 2.000 2.11 1 11/16-12 604-20-20 1 1/4 1 1/4 3.05 2.125 2.36 1 11/16-12
304-24-20 1 1/2 1 1/4 3.20 2.000 2.51 2-12 604-24-20 1 1/2 1 1/4 3.30 2.125 2.61 2-12
304-20-24 1 1/4 1 1/2 3.50 2.375 2.81 1 11/16-12 604-20-24 1 1/4 1 1/2 3.50 2.500 2.81 1 11/16-12
304-24-24 1 1/2 1 1/2 3.50 2.375 2.81 2-12 604-24-24 1 1/2 1 1/2 3.50 2.500 2.81 2-12
304-24-32 1 1/2 2 3.33 2.812 2.64 2-12 604-24-32 1 1/2 2 3.58 3.125 2.89 2-12
45° JIC THREAD CODE 61 45˚ JIC THREAD

TUBE FLANGE
O.D. SIZE
340-12-12 3/4 3/4 1.500 1.28 1.58 1 1/16-12
340-16-16 1 1 1.750 1.47 1.85 1 5/16-12
340-20-20 1 1/4 1 1/4 2.000 1.59 2.04 1 5/8-12
340-24-24 1 1/2 1 1/2 2.375 1.78 2.38 1 7/8-12
340-32-32 2 2 2.812 2.22 3.00 2 1/2-12
CODE 62 45˚ JIC THREAD

TUBE FLANGE
O.D. SIZE
640-12-12 3/4 3/4 1.625 1.28 1.58 1 1/16-12
640-16-16 1 1 1.875 1.47 1.85 1 5/16-12
640-20-20 1 1/4 1 1/4 2.125 1.59 2.04 1 5/8-12
640-24-24 1 1/2 1 1/2 2.500 1.78 2.38 1 7/8-12
640-32-32 2 2 3.13 2.22 3.00 2 1/2-12
45° ORFS THREAD

CODE 61 45˚ ORFS THREAD
TUBE FLANGE
O.D. SIZE
344-12-12 3/4 3/4 1.500 1.28 1.58 1 3/16-12
344-16-16 1 1 1.750 1.47 1.85 1 7/16-12
344-20-20 1 1/4 1 1/4 2.000 1.59 2.04 1 11/16-12
344-24-24 1 1/2 1 1/2 2.375 1.78 2.38 2-12
CODE 62 45˚ ORFS THREAD

TUBE FLANGE
O.D. SIZE
644-12-12 3/4 3/4 1.625 1.28 1.58 1 3/16-12
644-16-16 1 1 1.875 1.47 1.85 1 7/16-12
644-20-20 1 1/4 1 1/4 2.125 1.59 2.04 1 11/16-12
644-24-24 1 1/2 1 1/2 2.500 1.78 2.38 2-12
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
90° JIC THREAD
VALVES
INLINE
CODE 62 90˚ JIC THREAD
TUBE FLANGE
O.D. SIZE
690-8-8 1/2 1/2 1.250 1.46 2.13 3/4-16
690-12-12 3/4 3/4 1.625 1.66 2.13 1 1/16-12
690-16-12 1 3/4 1.625 1.66 2.13 1 5/16-12
690-12-16 3/4 1 1.875 1.81 2.37 1 1/16-12
CODE 61 90˚ JIC THREAD 690-16-16 1 1 1.875 1.81 2.37 1 5/16-12
TUBE FLANGE
VALVES
PART NO. A B C THREAD 690-20-16 1 1/4 1 1.875 1.81 2.37 1 5/8-12
BALL
O.D. SIZE
690-16-20 1 1 1/4 2.125 2.06 2.76 1 5/16-12
390-8-8 1/2 1/2 1.19 1.46 2.13 3/4-16
690-20-20 1 1/4 1 1/4 2.125 2.06 2.76 1 5/8-12
390-8-12 1/2 3/4 1.500 1.66 2.13 3/4-16
690-24-20 1 1/2 1 1/4 2.125 2.19 2.76 1 7/8-12
390-12-12 3/4 3/4 1.500 1.66 2.13 1 1/16-12
690-20-24 1 1/4 1 1/2 2.500 2.33 3.15 1 5/8-12
390-16-12 1 3/4 1.500 1.66 2.13 1 5/16-12
690-24-24 1 1/2 1 1/2 2.500 2.33 3.15 1 7/8-12
390-12-16 3/4 1 1.750 1.81 2.37 1 1/16-12
690-32-24 2 1 1/2 2.500 3.06 4.25 2 1/2-12
390-16-16 1 1 1.750 1.81 2.37 1 5/16-12
690-24-32 1 1/2 2 3.125 3.06 4.25 1 7/8-12
390-20-16 1 1/4 1 1.750 1.81 2.37 1 5/8-12
690-32-32 2 2 3.125 3.06 4.25 2 1/2-12
390-12-20 3/4 1 1/4 2.000 2.06 2.62 1 1/16-12
COUPLINGS
390-16-20 1 1 1/4 2.000 2.06 2.62 1 5/16-12
QUICK
390-20-20 1 1/4 1 1/4 2.000 2.06 2.62 1 5/8-12
390-24-20 1 1/2 1 1/4 2.000 2.06 2.62 1 7/8-12
390-12-24 3/4 1 1/2 2.375 2.33 3.15 1 1/16-12
390-16-24 1 1 1/2 2.375 2.33 3.15 1 5/16-12
390-20-24
390-24-24
1 1/4
1 1/2
1 1/2
1 1/2
2.375
2.375
2.33
2.33
3.15
3.15
1 5/8-12
1 7/8-12
90° ORFS THREAD
390-32-24 2 1 1/2 2.375 2.58 3.15 2 1/2-12
390-24-32 1 1/2 2 2.812 3.06 4.25 1 7/8-12
COUPLINGS
390-32-32 2 2 2.812 3.06 4.25 2 1/2-12
390-32-40 2 2 1/2 3.312 3.06 4.25 2 1/2-12
WELD
AND RETURN
SUCTION
CODE 61 90˚ ORFS THREAD CODE 62 90˚ ORFS THREAD
O.D. SIZE O.D. SIZE
394-12-12 3/4 3/4 1.500 1.66 2.13 1 3/16-12 694-12-8 3/4 1/2 1.250 1.66 2.13 1 3/16-12
394-16-12 1 3/4 1.500 1.66 2.13 1 7/16-12 694-12-12 3/4 3/4 1.625 1.66 2.13 1 3/16-12
394-12-16 3/4 1 1.750 1.81 2.37 1 3/16-12 694-16-12 1 3/4 1.625 1.66 2.13 1 7/16-12
394-16-16 1 1 1.750 1.81 2.37 1 7/16-12 694-12-16 3/4 1 1.875 1.81 2.37 1 3/16-12
394-20-16 1 1/4 1 1.750 1.81 2.37 1 11/16-12 694-16-16 1 1 1.875 1.81 2.37 1 7/16-12
FLANGES
394-16-20 1 1 1/4 2.000 2.06 2.62 1 7/16-12 694-20-16 1 1/4 1 1.875 1.81 2.37 1 11/16-12
C/S
394-20-20 1 1/4 1 1/4 2.000 2.06 2.62 1 11/16-12 694-16-20 1 1 1/4 2.125 2.06 2.76 1 7/16-12
394-24-20 1 1/2 1 1/4 2.000 2.06 2.62 2-12 694-20-20 1 1/4 1 1/4 2.125 2.06 2.76 1 11/16-12
394-20-24 1 1/4 1 1/2 2.375 2.33 3.15 1 11/16-12 694-24-20 1 1/2 1 1/4 2.125 2.06 2.76 2-12
394-24-24 1 1/2 1 1/2 2.375 2.33 3.15 2-12 694-20-24 1 1/4 1 1/2 2.500 2.33 3.15 1 11/16-12
394-24-32 1 1/2 2 2.812 3.06 4.25 2-12 694-24-24 1 1/2 1 1/2 2.500 2.33 3.15 2-12
694-24-32 1 1/2 2 3.125 3.06 4.25 2-12
FLANGES
S/S
87
866-FLANGES | 513.527.4444 | Fax 513.527.4449
87
Flange Head X Flange Head

• Used to connect two flat faced flanges
• One-piece forged carbon steel construction with Silver Trivalent plating
CODE 61 FLANGE HEAD X FLANGE HEAD CODE 62 FLANGE HEAD X FLANGE HEAD
FLANGE FLANGE
PART NO. A B C PART NO. A B C
SIZE SIZE
301-8-8 0.50 4.00 1.188 0.406 601-8-8 0.50 4.00 1.250 0.406
301-12-12 0.75 4.00 1.500 0.656 601-12-12 0.75 4.00 1.625 0.656
301-16-16 1.00 4.00 1.750 0.906 601-16-16 1.00 6.00 1.875 0.810
301-20-20 1.25 4.00 2.000 1.125 601-20-20 1.25 6.00 2.125 1.010
301-24-24 1.50 4.00 2.375 1.375 601-24-24 1.50 6.00 2.500 1.250
301-32-32 2.00 4.00 2.812 1.875 601-32-32 2.00 8.00 3.125 1.750
301-40-40 2.50 6.00 3.312 2.375
301-48-48 3.00 6.00 4.000 2.875
301-56-56 3.50 6.00 4.500 3.375
301-64-64 4.00 6.00 5.000 3.875
*Stainless steel and custom lengths available upon request
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Butt Weld Flange Head
VALVES
INLINE
Figure 1 Figure 2
CODE 61 BUTT WELD TO FLANGE HEAD FOR SCHEDULE 40 PIPE

PART NO. PART NO.
VALVES
PIPE CLAMP
O-RING FLAT FACE A B C D E F G
BALL
SIZE SIZE
FIG. 1 FIG. 2
8P-8BWSF-40 8P-8BWSFN-40 .50 .50 1.06 .265 1.188 1.000 .548 .840 .624
12P-12BWSF-40 12P-12BWSFN-40 .75 .75 1.06 .265 1.500 1.250 .744 1.050 .826
16P-16BWSF-40 16P-16BWSFN-40 1.00 1.00 1.25 .315 1.750 1.560 .959 1.315 1.051
20P-20BWSF-40 20P-20BWSFN-40 1.25 1.25 1.44 .315 2.000 1.750 1.280 1.660 1.382
24P-24BWSF-40 24P-24BWSFN-40 1.50 1.50 1.75 .315 2.375 2.115 1.502 1.900 1.612
32P-32BWSF-40 32P-32BWSFN-40 2.00 2.00 2.00 .375 2.812 2.490 1.941 2.375 2.069
40P-40BWSF-40 40P-40BWSFN-40 2.50 2.50 2.31 .375 3.312 2.995 2.325 2.875 2.471
COUPLINGS
48P-48BWSF-40 48P-48BWSFN-40 3.00 3.00 2.31 .375 4.000 3.615 2.902 3.500 3.070
QUICK
64P-64BWSF-40 64P-64BWSFN-40 4.00 4.00 1.90 .442 5.000 4.595 3.828 4.500 4.028
COUPLINGS
PART NO. PART NO.
PIPE CLAMP
O-RING FLAT FACE A B C D E F
SIZE SIZE
WELD
FIG. 1 FIG. 2
8P-8BWSF-80 8P-8BWSFN-80 .50 .50 1.06 .265 1.188 1.000 .548 .840
12P-12BWSF-80 12P-12BWSFN-80 .75 .75 1.06 .265 1.500 1.250 .744 1.050
16P-16BWSF-80 16P-16BWSFN-80 1.00 1.00 1.25 .315 1.750 1.560 .959 1.315
20P-20BWSF-80 20P-20BWSFN-80 1.25 1.25 1.44 .315 2.000 1.750 1.280 1.660
24P-24BWSF-80 24P-24BWSFN-80 1.50 1.50 1.75 .315 2.375 2.115 1.502 1.900
32P-32BWSF-80 32P-32BWSFN-80 2.00 2.00 2.00 .375 2.812 2.490 1.941 2.375
40P-40BWSF-80 40P-40BWSFN-80 2.50 2.50 2.31 .375 3.312 2.995 2.325 2.875
48P-48BWSF-80 48P-48BWSFN-80 3.00 3.00 2.31 .375 4.000 3.615 2.902 3.500
AND RETURN
SUCTION
Figure 1 CODE 61 BUTT WELD TO FLANGE HEAD FOR SCHEDULE 160 PIPE
PART NO. PART NO.
PIPE CLAMP
SIZE SIZE
FIG. 1 FIG. 2
8P-8BWSF-160 8P-8BWSFN-160 .50 .50 1.06 .265 1.188 1.000 .464 .840
12P-12BWSF-160 12P-12BWSFN-160 .75 .75 1.06 .265 1.500 1.250 .612 1.050
16P-16BWSF-160 16P-16BWSFN-160 1.00 1.00 1.25 .315 1.750 1.560 .815 1.315
20P-20BWSF-160 20P-20BWSFN-160 1.25 1.25 1.44 .315 2.000 1.750 1.160 1.660
FLANGES
24P-24BWSF-160 24P-24BWSFN-160 1.50 1.50 1.75 .315 2.375 2.115 1.338 1.900
32P-32BWSF-160 32P-32BWSFN-160 2.00 2.00 2.00 .375 2.812 2.490 1.687 2.375
C/S
40P-40BWSF-160 40P-40BWSFN-160 2.50 2.50 2.31 .375 3.312 2.995 2.125 2.875
48P-48BWSF-160 48P-48BWSFN-160 3.00 3.00 2.31 .375 4.000 3.615 2.624 3.500
Figure 2
FLANGES
S/S
89
866-FLANGES | 513.527.4444 | Fax 513.527.4449
89
Butt Weld Flange Head
Figure 1 Figure 2

PART NO. PART NO.
PIPE CLAMP
SIZE SIZE
FIG. 1 FIG. 2
8P-8BWSFX-80 8P-8BWSFXN-80 .50 .50 1.10 .305 1.250 1.000 .548 .840
12P-12BWSFX-80 12P-12BWSFXN-80 .75 .75 1.42 .345 1.625 1.250 .744 1.050
16P-16BWSFX-80 16P-16BWSFXN-80 1.00 1.00 1.61 .375 1.875 1.560 .959 1.315
20P-20BWSFX-80 20P-20BWSFXN-80 1.25 1.25 1.73 .405 2.125 1.750 1.280 1.660
24P-24BWSFX-80 24P-24BWSFXN-80 1.50 1.50 2.17 .495 2.500 2.115 1.502 1.900
32P-32BWSFX-80 32P-32BWSFXN-80 2.00 2.00 2.48 .495 3.125 2.490 1.941 2.375

PART NO. PART NO.
PIPE CLAMP
SIZE SIZE
FIG. 1 FIG. 2
8P-8BWSFX-160 8P-8BWSFXN-160 .50 .50 1.10 .305 1.250 1.000 .464 .840
12P-12BWSFX-160 12P-12BWSFXN-160 .75 .75 1.42 .345 1.625 1.250 .612 1.050
16P-16BWSFX-160 16P-16BWSFXN-160 1.00 1.00 1.61 .375 1.875 1.560 .815 1.315
20P-20BWSFX-160 20P-20BWSFXN-160 1.25 1.25 1.73 .405 2.125 1.750 1.160 1.660
24P-24BWSFX-160 24P-24BWSFXN-160 1.50 1.50 2.17 .495 2.500 2.115 1.338 1.900
32P-32BWSFX-160 32P-32BWSFXN-160 2.00 2.00 2.48 .495 3.125 2.490 1.687 2.375
CODE 62 BUTT WELD TO FLANGE HEAD FOR SCHEDULE XXS PIPE

PART NO. PART NO.
PIPE CLAMP
SIZE SIZE
FIG. 1 FIG. 2
8P-8BWSFX-XXS 8P-8BWSFXN-XXS .50 .50 1.10 .305 1.250 1.000 .252 .840
12P-12BWSFX-XXS 12P-12BWSFXN-XXS .75 .75 1.42 .345 1.625 1.250 .434 1.050
16P-16BWSFX-XXS 16P-16BWSFXN-XXS 1.00 1.00 1.61 .375 1.875 1.560 .599 1.315
20P-20BWSFX-XXS 20P-20BWSFXN-XXS 1.25 1.25 1.73 .405 2.125 1.750 .896 1.660
24P-24BWSFX-XXS 24P-24BWSFXN-XXS 1.50 1.50 2.17 .495 2.500 2.115 1.100 1.900
32P-32BWSFX-XXS 32P-32BWSFXN-XXS 2.00 2.00 2.48 .495 3.125 2.490 1.503 2.375
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Female Flange Head Adapter
CODE 61 SOCKET WELD TO FLANGE HEAD FOR PIPE
VALVES
INLINE
PIPE CLAMP
PART NO. A B C D E F G H J
SIZE SIZE
8P-8WSF .50 .50 2.34 .56 .265 1.187 1.000 .500 1.25 .855 .924
12P-12WSF .75 .75 2.34 .56 .265 1.500 1.250 .750 1.50 1.062 1.234
16P-16WSF 1.00 1.00 2.38 .63 .315 1.750 1.560 1.000 1.75 1.328 1.484
20P-20WSF 1.25 1.25 2.62 .68 .315 2.000 1.750 1.250 2.00 1.672 1.684
24P-24WSF 1.50 1.50 2.88 .76 .315 2.375 2.115 1.500 2.38 1.922 1.964
32P-32WSF 2.00 2.00 3.00 .88 .375 2.812 2.490 2.000 2.81 2.406 2.434
40P-40WSF 2.50 2.50 3.06 1.00 .375 3.312 2.995 2.500 3.31 2.906 2.920
VALVES
BALL
48P-48WSF 3.00 3.00 3.88 1.25 .375 4.000 3.615 2.875 4.00 3.547 3.534
CODE 62 SOCKET WELD TO FLANGE HEAD FOR PIPE

PIPE CLAMP
SIZE SIZE
W53-12-12 .75 .75 2.75 .630 .345 1.625 1.250 .750 1.750 1.062 1.234
W53-16-16 1.00 1.00 3.06 .630 .375 1.875 1.560 1.000 2.000 1.328 1.484
W53-20-20 1.25 1.25 3.31 .690 .405 2.125 1.750 1.125 2.312 1.672 1.704
COUPLINGS
W53-24-24 1.50 1.50 3.93 .750 .495 2.500 2.115 1.375 2.750 1.922 1.984
QUICK
W53-32-32 2.00 2.00 4.06 .880 .495 3.125 2.490 1.875 3.125 2.406 2.604
COUPLINGS
WELD
CODE 61 NPTF THREAD TO FLANGE HEAD
PIPE CLAMP
PART NO. A B C D E F G H
SIZE SIZE
12F-12FO .75 .75 2.47 .265 1.500 1.250 .75 1.50 .75 1.234
16F-16FO 1.00 1.00 2.66 .315 1.750 1.560 1.00 1.75 1.00 1.484
20F-20FO 1.25 1.25 2.84 .315 2.000 1.750 1.25 2.00 1.25 1.684
24F-24FO 1.50 1.50 3.00 .315 2.375 2.115 1.50 2.38 1.50 1.964
AND RETURN
32F-32FO 2.00 2.00 3.00 .375 2.812 2.490 2.00 2.81 2.00 2.434
SUCTION
CODE 61 SAE THREAD TO FLANGE HEAD
TUBE CLAMP
SIZE SIZE
12S-12FO .75 .75 2.47 .265 1.500 1.250 .75 1.50 1 1/16-12 1.234
16S-16FO 1.00 1.00 2.66 .315 1.750 1.560 1.00 1.75 1 5/16-12 1.484
20S-20FO 1.25 1.25 2.84 .315 2.000 1.750 1.25 2.00 1 5/8-12 1.684
FLANGES
24S-24FO 1.50 1.50 3.00 .315 2.375 2.115 1.50 2.38 1 7/8-12 1.964
C/S
32S-32FO 2.00 2.00 3.00 .375 2.812 2.490 2.00 2.81 2 1/2-12 2.434
FLANGES
S/S
91
866-FLANGES | 513.527.4444 | Fax 513.527.4449
91
Tube Flange Head Fitting
Figure 1 Figure 2
*For sizes not listed, please consult factory.
CODE 61 TUBE FLANGE HEAD FITTING

PART NO. PART NO. FLANGE
TUBE SIZE A B C D E F G H
O-RING FIG. 1 FLAT FACE FIG. 2 SIZE
8T-8SF 8T-8SFN .50 .50 1.188 .406 .924 .502 .50 .265 .312 1.000
10T-8SF 10T-8SFN .63 .50 1.188 .500 .924 .627 .50 .265 .312 1.000
12T-12SF 12T-12SFN .75 .75 1.500 .656 1.234 .752 .56 .265 .375 1.250
16T-12SF 16T-12SFN 1.00 .75 1.500 .750 1.234 1.002 .56 .265 .375 1.250
16T-16SF 16T-16SFN 1.00 1.00 1.750 .906 1.484 1.002 .56 .315 .375 1.560
20T-16SF 20T-16SFN 1.25 1.00 1.750 1.000 1.484 1.252 .56 .315 .375 1.560
20T-20SF 20T-20SFN 1.25 1.25 2.000 1.125 1.684 1.252 .56 .315 .375 1.750
24T-20SF 24T-20SFN 1.50 1.25 2.000 1.250 1.684 1.502 .56 .315 .375 1.750
24T-24SF 24T-24SFN 1.50 1.50 2.375 1.375 1.964 1.502 .62 .315 .438 2.115
28T-24SF 28T-24SFN 1.75 1.50 2.375 1.500 1.964 1.752 .62 .315 .438 2.115
32T-32SF 32T-32SFN 2.00 2.00 2.812 1.875 2.434 2.002 .62 .375 .500 2.490
36T-32SF 36T-32SFN 2.25 2.00 2.812 2.000 2.434 2.252 .62 .375 .437 2.490
40T-40SF 40T-40SFN 2.50 2.50 3.312 2.375 2.904 2.502 .68 .375 .562 2.995
44T-40SF 44T-40SFN 2.75 2.50 3.312 2.500 2.904 2.752 .68 .375 .500 2.995
48T-48SF 48T-48SFN 3.00 3.00 4.000 2.875 3.534 3.002 .75 .375 .562 3.615
56T-56SF 56T-56SFN 3.50 3.50 4.500 3.380 3.980 3.502 .88 .440 .750 4.100
64T-64SF 64T-64SFN 4.00 4.00 5.000 3.880 4.480 4.040 1.00 .440 .810 4.600
80T-80SF 80T-80SFN 5.00 5.00 6.000 4.880 5.480 5.002 1.13 .440 .940 5.600
CODE 62 TUBE FLANGE HEAD FITTING

PART NO. PART NO. FLANGE
TUBE SIZE A B C D E F G H
O-RING FIG. 1 FLAT FACE FIG. 2 SIZE
12T-12SFX 12T-12SFXN .75 .75 1.625 .656 1.234 .752 .69 .345 .500 1.250
16T-12SFX 16T-12SFXN 1.00 .75 1.625 .750 1.234 1.002 .69 .345 .500 1.250
16T-16SFX 16T-16SFXN 1.00 1.00 1.875 .810 1.484 1.002 .81 .375 .625 1.560
20T-16SFX 20T-16SFXN 1.25 1.00 1.875 1.000 1.484 1.252 .81 .375 .625 1.560
20T-20SFX 20T-20SFXN 1.25 1.25 2.125 1.010 1.704 1.252 1.00 .405 .812 1.750
24T-20SFX 24T-20SFXN 1.50 1.25 2.125 1.250 1.704 1.502 1.00 .405 .812 1.750
24T-24SFX 24T-24SFXN 1.50 1.50 2.500 1.250 1.984 1.502 1.19 .495 1.000 2.115
28T-24SFX 28T-24SFXN 1.75 1.50 2.500 1.500 1.984 1.757 1.19 .495 1.000 2.115
32T-32SFX 32T-32SFXN 2.00 2.00 3.125 1.750 2.604 2.002 1.50 .495 1.375 2.490
36T-32SFX 36T-32SFXN 2.25 2.00 3.125 2.000 2.604 2.252 1.50 .495 1.312 2.490
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Braze-On Tube Fittings
• AISI 1020 Carbon Steel Material
• Natural Finish
VALVES
•
INLINE
O-Ring groove per SAE J1453
• O-Ring not included
VALVES
BALL
COUPLINGS
QUICK
BRAZE-ON TUBE FITTINGS
PART NO. TUBE SIZE ORFS THREAD SIZE A B C D E F
1453-04-04 1/4” 9/16”-18 .625 .780 .394 .250 .177 .252

1453-05-04 5/16” 9/16”-18 .625 .780 .394 .250 .177 .315
1453-06-04 3/8” 9/16”-18 .750 .780 .394 .250 .177 .377
COUPLINGS
1453-06-06 3/8” 11/16”-16 .750 .830 .264 .250 .256 .377
WELD
1453-08-06 1/2” 11/16”-16 .875 .950 .264 .375 .256 .502
1453-08-08 1/2” 13/16”-16 .875 1.010 .378 .375 .374 .502
1453-10-08 5/8” 13/16”-16 .937 1.060 .378 .375 .374 .627
1453-12-08 3/4” 13/16”-16 1.125 1.040 .378 .375 .374 .752
1453-14-08 7/8” 13/16”-16 1.250 1.09 .378 .375 .374 .877
1453-10-10 5/8” 1”-14 1.062 1.120 .610 .375 .492 .627
AND RETURN
1453-12-10 3/4” 1”-14 1.125 1.150 .610 .375 .492 .752
SUCTION
1453-16-10 1” 1”-14 1.375 1.340 .610 .500 .492 1.002
1453-12-12 3/4” 1-3/16”-12 1.250 1.210 .670 .375 .609 .752
1453-14-12 7/8” 1-3/16”-12 1.250 1.210 .670 .375 .609 .877
1453-16-12 1” 1-3/16”-12 1.500 1.450 .670 .500 .609 1.002
1453-16-16 1” 1-7/16”-12 1.500 1.470 .689 .500 .807 1.002
1453-20-16 1-1/4” 1-7/16”-12 1.750 1.470 .689 .500 .807 1.252
1453-20-20 1-1/4” 1-11/16”-12 1.750 1.470 .689 .500 1.024 1.252
FLANGES
1453-24-20 1-1/2” 1-11/16”-12 2.000 1.470 .689 .500 .1.024 1.502

C/S
1453-24-24 1-1/2” 2”-12 2.125 1.470 .689 .500 1.260 1.502

1453-28-24 1-3/4” 2”-12 2.125 1.470 .689 .531 1.260 1.752
FLANGES
S/S
93
866-FLANGES | 513.527.4444 | Fax 513.527.4449
93
JIC Braze-On Fittings

• AISI 1020 Carbon Steel Material
• Natural Finish
• 37° Male JIC per SAE J514
JIC BRAZE-ON
PART NO. TUBE SIZE JIC THREAD SIZE A B C D E F
51437-6-6 3/8” 9/16”-18 .625 .906 .556 .250 .297 .377

51437-8-8 1/2” 3/4”-16 .813 1.063 .657 .250 .391 .502
51437-12-12 3/4” 1 1/16”-12 1.125 1.344 .864 .312 .609 .752
CAT-Style Split Flanges
Fits Caterpillar Flange Head

ends only
* CAT-Style Flange Plugs also

available. Consult factory
for details.
PTX SERIES SPLIT FLANGES

MOUNTING
**KIT PART FLANGE HARDWARE
NO. SIZE
HHCS
12PTX-2 12PTXO .75 2.950 2.000 .446 1.210 .406 1.270 1.632 1.102 .530 3/8-16X1.75
16PTX-2 16PTXO 1.00 3.190 2.250 .507 1.335 .469 1.550 1.884 1.102 .530 7/16-14X1.75
20PTX-2 20PTXO 1.25 3.750 2.625 .585 1.490 .531 1.750 2.134 1.102 .530 1/2-13X2.00
24PTX-2 24PTXO 1.50 4.440 3.125 .679 1.335 .656 2.030 2.509 1.258 .530 5/8-11X2.50
32PTX-2 32PTXO 2.00 5.240 3.812 .834 2.205 .827 2.640 3.130 1.457 .530 3/4-10X2.75
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
CAT-Style Split Flange Adapters
VALVES
INLINE
VALVES
BALL
CAT-STYLE JIC THREAD
PART NO. TUBE O.D. FLANGE SIZE A B C D THREAD O-RING
609-12-12 3/4” 3/4” 2.750 1.625 1.890 0.560 1 1/16-12” 214

609-16-16 1” 1” 2.800 1.875 1.890 0.560 1 5/16-12” 219
609-20-20 1 1/4” 1 1/4” 3.050 2.125 2.090 0.560 1 5/8-12” 222
609-24-24 1 1/2” 1 1/2” 3.500 2.500 2.420 0.560 1 7/8-12” 225
* Additional sizes and configurations available upon request
COUPLINGS
QUICK
COUPLINGS
WELD
AND RETURN
SUCTION
CAT-STYLE JIC THREAD
PART NO. TUBE O.D. FLANGE SIZE A B C D THREAD O-RING
699-16-16 1" 1" 1.875 1.810 2.370 0.560 1 5/16-12" 219

699-16-20 1" 1 1/4" 2.125 2.060 2.760 0.560 1 5/16-12" 222
699-20-20 1 1/4" 1 1/4" 2.125 2.060 2.760 0.560 1 5/8-12" 222
FLANGES
C/S
FLANGES
S/S
95
866-FLANGES | 513.527.4444 | Fax 513.527.4449
95
Flange Plug
Figure 1 Figure 2
CODE 61 FLANGE PLUG CODE 62 FLANGE PLUG

PART NO. PART NO. PART NO. PART NO.
FLANGE FLANGE
O-RING FLAT FACE A B C D E O-RING FLAT FACE A B C D E
SIZE SIZE
FIG. 1 FIG. 2 FIG. 1 FIG. 2
8FOP 8FP .50 1.188 .924 .50 .265 1.000 12FOPX 12FPX .75 1.625 1.234 .690 .345 1.250
12FOP 12FP .75 1.500 1.234 .56 .265 1.250 16FOPX 16FPX 1.00 1.875 1.484 .810 .375 1.560
16FOP 16FP 1.00 1.750 1.484 .56 .315 1.560 20FOPX 20FPX 1.25 2.125 1.704 1.000 .405 1.750
20FOP 20FP 1.25 2.000 1.684 .56 .315 1.750 24FOPX 24FPX 1.50 2.500 1.984 1.190 .495 2.115
24FOP 24FP 1.50 2.375 1.964 .62 .315 2.115 32FOPX 32FPX 2.00 3.125 2.604 1.500 .495 2.490
32FOP 32FP 2.00 2.810 2.434 .62 .375 2.490
40FOP 40FP 2.50 3.312 2.904 .68 .375 2.995
48FOP 48FP 3.00 4.000 3.534 .75 .375 3.615
CAT-Style Flange Plug
CAT-STYLE FLANGE PLUG

O-RING
PART NO. FLANGE SIZE A B C
NO.
8COPX .500 1.250 1.00 .560 210

12COPX .750 1.625 1.250 .560 214
16COPX 1.00 1.875 1.560 .560 219
20COPX 1.25 2.125 1.750 .560 222
24COPX 1.50 2.500 2.115 .560 225
32COPX 2.00 3.125 2.490 .560 228
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Connector Block & Plate
Used to connect two o-ring flanges
VALVES
INLINE
CODE 61 CONNECTOR BLOCK
PAD G
PART NO. A B C D E F
SIZE UNC-2B
ACB 8-8 .50 2.00 2.12 .688 1.500 1.75 .502 5/16-18
ACB 12-12 .75 2.00 2.62 .875 1.875 1.75 .752 3/8-16
ACB 16-16 1.00 2.25 2.75 1.031 2.062 1.75 1.002 3/8-16
ACB 20-20 1.25 3.00 3.19 1.188 2.312 2.125 1.252 7/16-14
ACB 24-24 1.50 3.50 3.75 1.406 2.750 2.125 1.502 1/2-13
ACB 32-32 2.00 3.88 4.00 1.688 3.062 2.125 1.942 1/2-13
VALVES
BALL
ACB 40-40 2.50 4.38 4.50 2.000 3.500 2.375 2.442 1/2-13
CODE 62 CONNECTOR BLOCK

PAD G
SIZE UNC-2B
ACBX 8-8 .50 2.00 2.22 .718 1.594 1.75 .502 5/16-18
ACBX 12-12 .75 2.50 2.81 .937 2.000 2.00 .752 3/8-16
COUPLINGS
ACBX 16-16 1.00 2.75 3.19 1.093 2.250 2.00 1.002 7/16-14
QUICK
ACBX 20-20 1.25 3.00 3.75 1.250 2.625 2.00 1.252 1/2-13
ACBX 24-24 1.50 3.88 4.50 1.437 3.125 2.50 1.502 5/8-11
ACBX 32-32 2.00 4.50 5.25 1.750 3.812 2.95 1.942 3/4-10
COUPLINGS
WELD
CODE 61 CONNECTOR PLATE
PAD
SIZE
8 CP .50 1.81 2.12 .688 1.500 .50 .344
12 CP .75 2.06 2.56 .875 1.875 .75 .406
16 CP 1.00 2.31 2.75 1.031 2.062 1.00 .406
20 CP 1.25 2.88 3.12 1.188 2.312 1.25 .469
AND RETURN
24 CP 1.50 3.25 3.69 1.406 2.750 1.50 .531
SUCTION
32 CP 2.00 3.81 4.00 1.688 3.062 2.00 .531
40 CP 2.50 4.12 4.44 2.000 3.500 2.50 .531
48 CP 3.00 5.16 5.31 2.438 4.188 3.00 .656
CODE 62 CONNECTOR PLATE

PAD
SIZE
FLANGES
12 CPX .75 2.38 2.81 .937 2.000 .750 .406

C/S
16 CPX 1.00 2.75 3.19 1.093 2.250 1.000 .469

20 CPX 1.25 3.06 3.75 1.250 2.625 1.250 .531
24 CPX 1.50 3.75 4.44 1.437 3.125 1.500 .656
32 CPX 2.00 4.50 5.25 1.750 3.812 2.000 .781
FLANGES
S/S
97
866-FLANGES | 513.527.4444 | Fax 513.527.4449
97
Double O-Ring Union

Used to connect two flat faced flanges
CODE 61 DOUBLE O-RING SPACER

PAD
SIZE
ADOS-8-8 .50 1.813 2.125 .688 1.50 .75 1.000 .502 .344
ADOS-12-12 .75 2.063 2.563 .875 1.875 .75 1.250 .752 .406
ADOS-16-16 1.00 2.313 2.750 1.031 2.063 .88 1.560 1.002 .406
ADOS-20-20 1.25 2.875 3.125 1.188 2.313 .94 1.750 1.252 .469
ADOS-24-24 1.50 3.250 3.688 1.406 2.750 1.19 2.115 1.502 .531
ADOS-32-32 2.00 3.813 4.000 1.688 3.063 1.44 2.490 2.002 .531
ADOS-40-40 2.50 4.281 4.500 2.000 3.500 1.82 2.995 2.502 .531
ADOS-48-48 3.00 5.156 5.313 2.438 4.188 2.19 3.615 3.002 .656
ADOS-56-56 3.50 5.500 6.000 2.750 4.750 1.44 4.095 3.502 .656
ADOS-64-64 4.00 6.00 6.38 3.062 5.125 1.44 4.595 4.002 .656
CODE 62 DOUBLE O-RING SPACER

PAD
SIZE
ADOSX-8-8 .500 1.94 2.30 .718 1.594 1.25 1.000 .502 .344
ADOSX-12-12 .750 2.50 2.95 .937 2.000 1.25 1.250 .752 .406
ADOSX-16-16 1.00 2.75 3.19 1.093 2.250 1.50 1.560 1.002 .492
ADOSX-20-20 1.25 3.06 3.75 1.250 2.625 1.43 1.750 1.252 .531
ADOSX-24-24 1.50 3.75 4.44 1.437 3.125 1.82 2.115 1.502 .656
ADOSX-32-32 2.00 4.50 5.25 1.750 3.812 1.82 2.490 2.002 .781
ADOSX-40-40 2.50 5.87 6.87 2.311 4.874 1.93 2.995 2.502 .906
ADOSX-48-48 3.00 7.00 8.50 2.811 6.000 2.69 3.615 3.002 1.156
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Gauge Port Spacer
VALVES
INLINE
VALVES
BALL
COUPLINGS
CODE 61 GAUGE PORT O-RING SPACER
QUICK
PAD
SIZE
AS-8-GP .50 1.82 2.16 .688 1.500 1.25 .62 1.000 .502 .344
AS-12-GP .75 2.06 2.69 .875 1.875 1.25 .62 1.250 .752 .406
AS-16-GP 1.00 2.31 2.75 1.031 2.062 .88 .44 1.560 1.002 .406
AS-20-GP 1.25 2.87 3.12 1.188 2.312 .94 .47 1.750 1.252 .469
AS-24-GP 1.50 3.25 3.68 1.406 2.750 1.19 .59 2.115 1.502 .531
COUPLINGS
AS-32-GP 2.00 3.81 4.00 1.688 3.062 1.38 .69 2.490 2.002 .531
WELD
AS-40-GP 2.50 4.28 4.50 2.000 3.500 1.75 .88 2.995 2.502 .531
AS-48-GP 3.00 5.15 5.31 2.438 4.188 2.12 1.06 3.615 3.002 .656
AS-56-GP 3.50 5.50 6.00 2.750 4.750 1.44 .720 4.095 3.502 .656
AS-64-GP 4.00 6.00 6.38 3.062 5.125 1.50 .750 4.595 4.002 .656
CODE 62 GAUGE PORT O-RING SPACER
AND RETURN
PAD
SUCTION
SIZE
ASX-8-GP .50 1.94 2.30 .718 1.594 1.25 .62 1.000 .502 .344
ASX-12-GP .75 2.50 2.95 .937 2.000 1.25 .62 1.250 .752 .406
ASX-16-GP 1.00 2.75 3.19 1.093 2.250 1.50 .75 1.560 1.002 .492
ASX-20-GP 1.25 3.06 3.75 1.250 2.625 1.50 .75 1.750 1.252 .531
ASX-24-GP 1.50 3.75 4.44 1.437 3.125 1.75 .88 2.115 1.502 .656
ASX-32-GP 2.00 4.50 5.25 1.750 3.812 1.75 .88 2.490 2.002 .781
ASX-40-GP 2.50 5.87 6.87 2.311 4.874 2.06 1.03 2.995 2.502 .906
ASX-48-GP 3.00 7.00 8.50 2.811 6.000 2.62 1.31 3.615 3.002 1.156
FLANGES
#4 SAE and 1/4” NPTF plugs provided with gauge port spacers
C/S
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

99
Orifice Plate
CODE 61 ORIFICE PLATE

PAD H
PART NO. A B C D E F G
SIZE DIA.
AOP-____-0861 .50 1.81 2.12 .688 1.500 .33 1.000 .344
AOP-____-1261 .75 2.06 2.56 .875 1.875 .33 1.250 .413
AOP-____-1661 1.00 2.31 2.75 1.031 2.063 .33 1.560 .413
AOP-____-2061 1.25 2.88 3.12 1.188 2.313 .33 1.750 .469
CUSTOMER
SPECIFIED
AOP-____-2461 1.50 3.25 3.69 1.406 2.750 .33 2.115 .531
AOP-____-3261 2.00 3.81 4.00 1.688 3.063 .33 2.490 .531
AOP-____-4061 2.50 4.28 4.50 2.000 3.500 .33 2.995 .531
AOP-____-4861 3.00 5.16 5.31 2.438 4.188 .33 3.615 .656
AOP-____-5661 3.50 5.50 6.00 2.750 4.750 .33 4.095 .656
AOP-____-6461 4.00 6.00 6.38 3.062 5.125 .33 4.595 .656
CODE 62 ORIFICE PLATE

PAD H
PART NO. A B C D E F G
SIZE DIA.
AOPX-____-0862 .50 1.94 2.19 .718 1.594 .33 1.000 .354
AOPX-____-1262 .75 2.50 2.81 .937 2.000 .33 1.250 .433
CUSTOMER
SPECIFIED
AOPX-____-1662 1.00 2.75 3.19 1.093 2.250 .33 1.560 .531
AOPX-____-2062 1.25 3.06 3.75 1.250 2.625 .33 1.750 .610
AOPX-____-2462 1.50 3.75 4.44 1.437 3.125 .33 2.115 .689
AOPX-____-3262 2.00 4.50 5.25 1.750 3.812 .33 2.490 .866
ORDERING INFORMATION
AOP - 0.500 - 32 61
Orifice Size
In Inches Flange Code 61 or
(0.500” would be Size Code 62
AOP-0.500-)
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Bolt Pattern Adapters
VALVES
INLINE
VALVES
BALL
COUPLINGS
QUICK
Outer envelope shape may vary due to size configuration.
Mounting kit available on o-ring grooved flanges by simply adding suffix letter ‘U’ to part number.
COUPLINGS
WELD
ORDERING INFORMATION
AFA - 1261 - 3262
AND RETURN
SUCTION
AFA
Pattern A: Flat Faced and Tapped
Pattern B: O-Ring and Drilled Bolt Pattern A Bolt Pattern B
Bolt Pattern A Bolt Pattern B
Code 61 or Code 61 or
Bolt Pattern Size Bolt Pattern Size
AFAC Code 62 Code 62
FLANGES
Pattern A: Flat Faced and Tapped

C/S
Pattern B: Flat Faced and Tapped

FLANGES
S/S
101
866-FLANGES | 513.527.4444 | Fax 513.527.4449
101
Blanking
Figure 1 Figure 2
FIG. 1 FIG. 2
Location hole may be present on some parts but does not affect functionality.
CODE 61 BLANKING
PART NO. PART NO. PAD H MOUNTING HARDWARE

A B C D E F G
O-RING FIG. 1 FLAT FACE FIG. 2 SIZE UNC-2B
O-RING SHCS
W36-8-8 W37-8-8 .50 1.813 2.125 .688 1.50 .75 1.000 .344 5/16-18 210 5/16-18X1.50
W36-12-12 W37-12-12 .75 2.063 2.563 .875 1.875 .75 1.250 .406 3/8-16 214 3/8-16X1.50
W36-16-16 W37-16-16 1.00 2.313 2.750 1.031 2.063 .88 1.560 .406 3/8-16 219 3/8-16X1.75
W36-20-20 W37-20-20 1.25 2.875 3.125 1.188 2.313 .94 1.750 .469 7/16-14 222 7/16-14X1.75
W36-24-24 W37-24-24 1.50 3.250 3.688 1.406 2.750 1.19 2.115 .531 1/2-13 225 1/2-13X2.25
W36-32-32 W37-32-32 2.00 3.813 4.000 1.688 3.063 1.44 2.490 .531 1/2-13 228 1/2-13X2.50
W36-40-40 W37-40-40 2.50 4.281 4.500 2.000 3.500 1.82 2.995 .531 1/2-13 232 1/2-13X2.75
W36-48-48 W37-48-48 3.00 5.156 5.313 2.438 4.188 2.19 3.615 .656 5/8-11 237 5/8-11X3.50
W36-56-56 W37-56-56 3.50 5.500 6.000 2.750 4.750 1.44 4.095 .656 5/8-11 241 5/8-11X2.75
W36-64-64 W37-64-64 4.00 6.00 6.38 3.062 5.125 1.44 4.595 .656 5/8-11 245 5/8-11X2.75
W36-80-80 W37-80-80 5.00 7.12 7.25 3.625 6.000 1.75 5.595 .656 5/8-11 253 5/8-11X3.00
CODE 62 BLANKING
PART NO. PART NO. PAD H MOUNTING HARDWARE

A B C D E F G
O-RING FIG. 1 FLAT FACE FIG. 2 SIZE UNC-2B
O-RING SHCS
W38-8-8 W39-8-8 .500 1.94 2.30 .718 1.594 1.25 1.000 .344 5/16-18 210 5/16-18X2.00
W38-12-12 W39-12-12 .750 2.50 2.95 .937 2.000 1.25 1.250 .406 3/8-16 214 3/8-16X2.00
W38-16-16 W39-16-16 1.00 2.75 3.19 1.093 2.250 1.50 1.560 .492 7/16-14 219 7/16-14X2.50
W38-20-20 W39-20-20 1.25 3.06 3.75 1.250 2.625 1.43 1.750 .531 1/2-13 222 1/2-13X2.50
W38-24-24 W39-24-24 1.50 3.75 4.44 1.437 3.125 1.82 2.115 .656 5/8-11 225 5/8-11X3.00
W38-32-32 W39-32-32 2.00 4.50 5.25 1.750 3.812 1.82 2.490 .781 3/4-10 228 3/4-10X3.00
W38-40-40 W39-40-40 2.50 5.87 6.87 2.311 4.874 1.93 2.995 .906 7/8-9 232 7/8-9X3.50
W38-48-48 W39-48-48 3.00 7.00 8.50 2.811 6.000 2.69 3.615 1.190 1 1/8-7 237 1 1/8-7X4.50
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Zero PSI Shipping Plate
VALVES
INLINE
VALVES
BALL
Anchor Fluid Power has developed a low cost solution to leaky, gasketless port covers. Forged steel shipping
plates are 0.33” thick, silver trivalent plated for resistance to oxidation, and incorporate an o-ring groove on one
side for “Zero Pressure” applications. The opposite side has a machined flat-face for capping off hose ends.
Applications Include: Cylinder Port Covers, Pump Port Covers, Stub-Out Header Line Covers, Maintenance
Work and Great for Painting Protection
COUPLINGS
QUICK
CODE 61 SHIPPING PLATE
MOUNTING
PART **KIT PART PAD HARDWARE
A B C D E F G
NO. NO. SIZE
O-RING HHCS
SP-8 SP-8U .50 1.81 2.12 .688 1.500 .33 1.000 .344 210 5/16-18X.75
SP-12 SP-12U .75 2.06 2.56 .875 1.875 .33 1.250 .413 214 3/8-16X.75
SP-16 SP-16U 1.00 2.31 2.75 1.031 2.063 .33 1.560 .413 219 3/8-16X.75
SP-20 SP-20U 1.25 2.88 3.12 1.188 2.313 .33 1.750 .469 222 7/16-14X.75
COUPLINGS
SP-24 SP-24U 1.50 3.25 3.69 1.406 2.750 .33 2.115 .531 225 1/2-13X.75
WELD
SP-32 SP-32U 2.00 3.81 4.00 1.688 3.063 .33 2.490 .531 228 1/2-13X.75
SP-40 SP-40U 2.50 4.28 4.50 2.000 3.500 .33 2.995 .531 232 1/2-13X.75
SP-48 SP-48U 3.00 5.16 5.31 2.438 4.188 .33 3.615 .656 237 5/8-11X1.00
SP-56 SP-56U 3.50 5.50 6.00 2.750 4.750 .33 4.095 .656 241 5/8-11X1.00
SP-64 SP-64U 4.00 6.00 6.38 3.062 5.125 .33 4.595 .656 245 5/8-11X1.00
CODE 62 SHIPPING PLATE
AND RETURN
MOUNTING
SUCTION
PART **KIT PART PAD HARDWARE
A B C D E F G
NO. NO. SIZE
O-RING HHCS
SPX-8 SPX-8U .50 1.94 2.19 .718 1.594 .33 1.000 .354 210 5/16-18X.75
SPX-12 SPX-12U .75 2.50 2.81 .937 2.000 .33 1.250 .433 214 3/8-16X.75
SPX-16 SPX-16U 1.00 2.75 3.19 1.093 2.250 .33 1.560 .531 219 7/16-14X.75
SPX-20 SPX-20U 1.25 3.06 3.75 1.250 2.625 .33 1.750 .610 222 1/2-13X.75
SPX-24 SPX-24U 1.50 3.75 4.44 1.437 3.125 .33 2.115 .689 225 5/8-11X1.00
SPX-32 SPX-32U 2.00 4.50 5.25 1.750 3.812 .33 2.490 .866 228 3/4-10X1.00
SPX-40 SPX-40U 2.50 5.87 6.87 2.311 4.874 .33 2.995 0.984 232 7/8-9X1.00
FLANGES
SPX-48 SPX-48U 3.00 7.00 8.50 2.811 6.00 .33 3.615 1.19 237 1 1/8-7X1.00
C/S
**When ordering this part # you will receive:(1) shipping plate, (4) hex head bolts,
and (1) Buna N O-Ring
NOT FOR USE ON DYNAMIC OR PRESSURIZED APPLICATIONS

FLANGES
S/S
103
866-FLANGES | 513.527.4444 | Fax 513.527.4449
103
NPTF Thread
Figure 1 FIG. 1 FIG. 2 Figure 2
*No Spotface
CODE 61 NPTF THREAD

PART NO. PART NO. MOUNTING HARDWARE
PORT PAD L
O-RING FLAT FACE A B C D E F G H J K
SIZE SIZE UNC-2B
FIG. 1 FIG. 2 O-RING SHCS
W43-8-8 W104-8-8 .50 .50 1.81 2.13 .688 1.500 1.42 .63 1.000 .502 1/2-14 .344 5/16-18 210 5/16-18X1.25
W43-12-12 W104-12-12 .75 .75 1.97 2.56 .875 1.875 1.42 .71 1.250 .752 3/4-14 .406 3/8-16 214 3/8-16X1.50
W43-16-16 W104-16-16 1.00 1.00 2.17 2.75 1.031 2.062 1.50 .71 1.560 1.002 1-11.5 .406 3/8-16 219 3/8-16X1.50
W43-20-20 W104-20-20 1.25 1.25 2.68 3.12 1.188 2.312 1.61 .83 1.750 1.252 1 1/4-11.5 .469 7/16-14 222 7/16-14X1.75
W43-24-24 W104-24-24 1.50 1.50 3.07 3.66 1.406 2.750 1.77 .98 2.115 1.502 1 1/2-11.5 .531 1/2-13 225 1/2-13X1.75
W43-32-32 W104-32-32 2.00 2.00 3.54 4.00 1.688 3.062 1.77 .98 2.490 2.002 2-11.5 .531 1/2-13 228 1/2-13X1.75
W43-40-40 W104-40-40 2.50 2.50 4.09 4.49 2.000 3.500 1.97 .98 2.995 2.502 2 1/2-8 .531 1/2-13 232 1/2-13X1.75
W43-48-48 W104-48-48 3.00 3.00 4.88 5.28 2.438 4.188 1.97 1.06 3.615 3.002 3-8 .656 5/8-11 237 5/8-11X2.00
W43-56-56 W104-56-56 3.50 3.50 5.35 5.98 2.750 4.750 2.19 1.06 4.095 3.500 3 1/2-8 .656 5/8-11 241 5/8-11X2.00
W43-64-64 W104-64-64 4.00 4.00 5.75 6.38 3.062 5.125 2.19 1.06 4.595 3.940 4-8 .656 5/8-11 245 5/8-11X2.00
CODE 62 NPTF THREAD

PORT PAD L
SIZE SIZE UNC-2B
W44-8-8 W45-8-8 .50 .50 1.81 2.21 .718 1.594 1.42 .63 1.000 .502 1/2-14 .344 5/6-18 210 5/16-18X1.25
W44-12-12 W45-12-12 .75 .75 2.17 2.80 .937 2.000 1.38 .83 1.250 .752 3/4-14 .406 3/8-16 214 3/8-16X1.50
W44-16-16 W45-16-16 1.00 1.00 2.56 3.19 1.093 2.250 1.65 .98 1.560 1.002 1-11.5 .492 7/16-14 219 7/16-14X1.75
W44-20-20 W45-20-20 1.25 1.25 3.07 3.75 1.250 2.625 1.77 1.06 1.750 1.252 1 1/4-11.5 .531 1/2-13 222 1/2-13X1.75
W44-24-24 W45-24-24 1.50 1.50 3.70 4.41 1.437 3.125 1.97 1.18 2.115 1.502 1 1/2-11.5 .656 5/8-11 225 5/8-11X2.25
W44-32-32 W45-32-32 2.00 2.00 4.50 5.28 1.750 3.812 2.56 1.46 2.490 2.002 2-11.5 .781 3/4-10 228 3/4-10X2.75
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
SAE Thread
VALVES
INLINE
VALVES
BALL
Figure 1 Figure 2
FIG. 1 FIG. 2
*No Spotface
COUPLINGS
QUICK
CODE 61 SAE STRAIGHT THREAD
PART NO. PART NO. MOUNTING
PORT PAD L HARDWARE
SIZE SIZE UNC-2B
W46-8-8 W106-8-8 .50 .50 1.81 2.13 .688 1.500 1.42 .63 1.000 .502 3/4-16 .344 5/16-18 210 5/16-18X1.25
W46-12-12 W106-12-12 .75 .75 1.97 2.56 .875 1.875 1.42 .71 1.250 .752 1 1/16-12 .406 3/8-16 214 3/8-16X1.50
W46-16-16 W106-16-16 1.00 1.00 2.17 2.75 1.031 2.062 1.50 .71 1.560 1.002 1 5/16-12 .406 3/8-16 219 3/8-16X1.50
COUPLINGS
W46-20-20 W106-20-20 1.25 1.25 2.68 3.12 1.188 2.312 1.61 .83 1.750 1.252 1 5/8-12 .469 7/16-14 222 7/16-14X1.75
WELD
W46-24-24 W106-24-24 1.50 1.50 3.07 3.66 1.406 2.750 1.77 .98 2.115 1.502 1 7/8-12 .531 1/2-13 225 1/2-13X1.75
*W46-32-32 W106-32-32 2.00 2.00 3.54 4.00 1.688 3.062 1.77 .98 2.490 2.002 2 1/2-12 .531 1/2-13 228 1/2-13X1.75
**W46-40-40 W106-40-40 2.50 2.50 4.09 4.49 2.000 3.500 1.97 .98 3.000 2.500 3-12 .530 1/2-13 232 1/2-13X1.75
**W46-48-48 W106-48-48 3.00 3.00 4.88 5.28 2.440 4.190 1.97 1.06 3.620 3.000 3 1/2-12 .660 5/8-11 237 5/8-11X2.00
**W46-64-64 W106-64-64 4.00 4.00 5.74 6.38 3.060 5.130 2.19 1.06 4.600 4.000 4 1/2-12 .660 5/8-11 245 5/8-11X2.00
*1000 PSI max for W46-32-32

**Consult Factory For Working Pressure
AND RETURN
SUCTION
PORT PAD L HARDWARE
SIZE SIZE UNC-2B
W48-8-8 W49-8-8 .50 .50 1.81 2.21 .718 1.594 1.42 .63 1.000 .502 3/4-16 .344 5/16-18 210 5/16-18X1.25
W48-12-12 W49-12-12 .75 .75 2.17 2.80 .937 2.000 1.38 .83 1.250 .752 1 1/6-12 .406 3/8-16 214 3/8-16X1.50
W48-16-16 W49-16-16 1.00 1.00 2.56 3.19 1.093 2.250 1.65 .98 1.560 1.002 1 5/16-12 .492 7/16-14 219 7/16-14X1.75
W48-20-20 W49-20-20 1.25 1.25 3.07 3.75 1.250 2.625 1.77 1.06 1.750 1.252 1 5/8-12 .531 1/2-13 222 1/2-13X1.75
FLANGES
W48-24-24 W49-24-24 1.50 1.50 3.70 4.41 1.437 3.125 1.97 1.18 2.115 1.502 1 7/8-12 .656 5/8-11 225 5/8-11X2.25
C/S
W48-32-32 W49-32-32 2.00 2.00 4.50 5.28 1.750 3.812 2.56 1.46 2.490 2.002 2 1/2-12 .781 3/4-10 228 3/4-10X2.75
FLANGES
S/S
105
866-FLANGES | 513.527.4444 | Fax 513.527.4449
105
BSPP Thread
Figure 1 Figure 2
FIG. 1 FIG. 2
*No Spotface
CODE 61 BSPP THREAD

PORT PAD J L HARDWARE
O-RING FLAT FACE A B C D E F G H K
SIZE SIZE BSPP UNC-2B
W192-8-8 W193-8-8 .50 .50 1.81 2.13 .688 1.500 1.42 .63 1.000 .502 .50-14 .344 5/16-18 210 5/16-18X1.25
W192-12-12 W193-12-12 .75 .75 1.97 2.56 .875 1.875 1.42 .71 1.250 .752 .75-14 .406 3/8-16 214 3/8-16X1.50
W192-16-16 W193-16-16 1.00 1.00 2.17 2.75 1.031 2.062 1.50 .71 1.560 1.002 1.00-11 .406 3/8-16 219 3/8-16X1.50
W192-20-20 W193-20-20 1.25 1.25 2.68 3.12 1.188 2.312 1.61 .83 1.750 1.252 1.25-11 .469 7/16-14 222 7/16-14X1.75
W192-24-24 W193-24-24 1.50 1.50 3.07 3.66 1.406 2.750 1.77 .98 2.115 1.502 1.50-11 .531 1/2-13 225 1/2-13X1.75
W192-32-32 W193-32-32 2.00 2.00 3.54 4.00 1.688 3.062 1.77 .98 2.490 2.002 2.00-11 .531 1/2-13 228 1/2-13X1.75
CODE 62 BSPP THREAD

PORT PAD J L HARDWARE
O-RING FLAT FACE A B C D E F G H K
SIZE SIZE BSPP UNC-2B
W194-8-8 W195-8-8 .50 .50 1.81 2.21 .718 1.594 1.42 .63 1.000 .502 .50-14 .344 5/16-18 210 5/16-18X1.25
W194-12-12 W195-12-12 .75 .75 2.17 2.80 .937 2.000 1.38 .83 1.250 .752 .75-14 .406 3/8-16 214 3/8-16X1.50
W194-16-16 W195-16-16 1.00 1.00 2.56 3.19 1.093 2.250 1.65 .98 1.560 1.002 1.00-11 .492 7/16-14 219 7/16-14X1.75
W194-20-20 W195-20-20 1.25 1.25 3.07 3.75 1.250 2.625 1.77 1.06 1.750 1.252 1.25-11 .531 1/2-13 222 1/2-13X1.50
W194-24-24 W195-24-24 1.50 1.50 3.70 4.41 1.437 3.125 1.97 1.18 2.115 1.502 1.50-11 .656 5/8-11 225 5/8-11X2.25
W194-32-32 W195-32-32 2.00 2.00 4.50 5.28 1.750 3.812 2.56 1.46 2.490 2.002 2.00-11 .781 3/4-10 228 3/4-10X2.75
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
JIC Thread
VALVES
INLINE
VALVES
BALL
COUPLINGS
QUICK
4-Bolt Flange hole pattern per SAE J518. Male JIC Thread per SAE J514.
CODE 61 MALE JIC

PAD MOUNTING HARDWARE
PART NO. A B C D E F G H J K L
SIZE O-RING SHCS
W300-8-8 .50 1.81 2.13 .688 1.500 2.00 .88 1.000 .391 .657 .344 3/4-16 210 5/16-18X1.50
W300-12-12 .75 1.97 2.56 .875 1.875 2.29 .88 1.250 .609 .864 .413 1 1/16-12 214 3/8-16X1.50
COUPLINGS
W300-16-16 1.00 2.17 2.75 1.031 2.062 2.35 .88 1.560 .844 .911 .413 1 5/16-12 219 3/8-16X1.50
WELD
W300-20-20 1.25 2.68 3.12 1.188 2.312 2.49 .88 1.750 1.078 .958 .469 1 5/8-12 222 7/16-14X1.75
W300-24-24 1.50 3.07 3.66 1.406 2.750 2.81 .98 2.115 1.312 1.083 .531 1 7/8-12 225 1/2-13X1.75
CODE 62 MALE JIC
AND RETURN
SUCTION
SIZE O-RING SHCS
W600-8-8 .50 1.81 2.21 .719 1.594 1.75 .88 1.000 .391 .657 .344 3/4-16 210 5/16-18X1.50
W600-12-12 .75 2.17 2.80 .937 2.000 2.31 .88 1.250 .609 .864 .413 1-1/16-12 214 3/8-16X1.50
W600-16-16 1.00 2.56 3.19 1.093 2.250 2.62 .98 1.560 .844 .911 .492 1-5/16-12 219 7/16-14X1.75
W600-20-20 1.25 3.07 3.75 1.250 2.625 2.81 1.06 1.750 1.078 .958 .531 1-5/8-12 222 1/2-13X1.75
W600-24-24 1.50 3.70 4.41 1.437 3.125 3.25 1.18 2.115 1.312 1.083 .656 1-7/8-12 225 5/8-11X2.25
FLANGES
C/S
FLANGES
S/S
107
866-FLANGES | 513.527.4444 | Fax 513.527.4449
107
ORFS Thread
4-Bolt Flange hole thread per SAE J518. Male ORFS Thread per SAE J1453-1.
CODE 61 MALE ORFS

SIZE O-RING SHCS
W304-8-8 .50 1.81 2.13 .688 1.500 1.75 .88 1.000 .374 .512 .344 13/16-16 210 5/16-18X1.50
W304-12-12 .75 1.97 2.56 .875 1.875 2.00 .88 1.250 .611 .670 .413 1 3/16-12 214 3/8-16X1.50
W304-16-16 1.00 2.17 2.75 1.031 2.062 2.00 .88 1.560 .807 .689 .413 1 7/16-12 219 3/8-16X1.50
W304-20-20 1.25 2.68 3.12 1.188 2.312 2.25 .88 1.750 1.024 .689 .469 1 11/16-12 222 7/16-14X1.75
W304-24-24 1.50 3.07 3.66 1.406 2.750 2.50 .98 2.115 1.260 .689 .531 2-12 225 1/2-13X2.00
CODE 62 MALE ORFS

SIZE O-RING SHCS
W604-8-8 .50 1.81 2.21 .719 1.594 1.75 .88 1.000 .374 .512 .344 13/16-16 210 5/16-18X1.50
W604-12-12 .75 2.17 2.80 .937 2.000 2.25 .88 1.250 .611 .670 .413 1 3/16-12 214 3/8-16X1.50
W604-16-16 1.00 2.56 3.19 1.093 2.250 2.50 .98 1.560 .807 .689 .492 1 7/16-12 219 7/16-14X1.75
W604-20-20 1.25 3.07 3.75 1.250 2.625 2.62 1.06 1.750 1.024 .689 .531 1 11/16-12 222 1/2-13X1.75
W604-24-24 1.50 3.70 4.41 1.437 3.125 2.88 1.18 2.115 1.260 .689 .656 2-12 225 5/8-11X2.25
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Flat Socket Weld Pipe
VALVES
INLINE
Figure 1 Figure 2
VALVES
BALL
FIG. 1 FIG. 2
CODE 61 FLAT SOCKET WELD - PIPE
PIPE PAD HARDWARE
O-RING FLAT FACE A B C D E F G H J K L
SIZE SIZE
FIG 1. FIG. 2
COUPLINGS
O-RING SHCS
QUICK
W4-8-8 W61-8-8 .50 .50 1.813 2.125 .688 1.500 .750 .560 1.000 .502 .855 .344 5/16-18 210 5/16-18X1.50
W4-12-12 W61-12-12 .75 .75 2.063 2.563 .875 1.875 .750 .560 1.250 .752 1.062 .406 3/8-16 214 3/8-16X1.50
W4-16-16 W61-16-16 1.00 1.00 2.313 2.75 1.031 2.063 .880 .630 1.560 1.002 1.328 .406 3/8-16 219 3/8-16X1.75
W4-20-20 W61-20-20 1.25 1.25 2.875 3.125 1.188 2.313 .940 .690 1.750 1.252 1.672 .469 7/16-14 222 7/16-14X1.75
W4-24-24 W61-24-24 1.50 1.50 3.25 3.688 1.406 2.75 1.190 .750 2.115 1.502 1.922 .531 1/2-13 225 1/2-13X2.25
W4-32-32 W61-32-32 2.00 2.00 3.813 4.00 1.688 3.063 1.380 .875 2.490 2.002 2.406 .531 1/2-13 228 1/2-13X2.50
W4-40-40 W61-40-40 2.50 2.50 4.281 4.50 2.000 3.500 1.750 1.00 2.995 2.502 2.906 .531 1/2-13 232 1/2-13X2.75
W4-48-48 W61-48-48 3.00 3.00 5.156 5.313 2.438 4.188 2.120 1.250 3.615 3.002 3.547 .656 5/8-11 237 5/8-11X3.50
COUPLINGS
WELD
PIPE PAD HARDWARE
SIZE SIZE
W59-8-8 W60-8-8 .50 .50 1.94 2.30 .718 1.594 1.25 .560 1.000 .502 .855 .344 5/16-18 210 5/16-18X2.00
W59-12-12 W60-12-12 .75 .75 2.50 2.95 .937 2.000 1.250 .560 1.250 .752 1.062 .406 3/8-16 214 3/8-16X2.00
W59-16-16 W60-16-16 1.00 1.00 2.75 3.19 1.093 2.250 1.500 .630 1.560 1.002 1.328 .492 7/16-14 219 7/16-14X2.50
AND RETURN
W59-20-20 W60-20-20 1.25 1.25 3.06 3.75 1.250 2.625 1.500 .690 1.750 1.252 1.672 .531 1/2-13 222 1/2-13X2.50
SUCTION
W59-24-24 W60-24-24 1.50 1.50 3.75 4.44 1.437 3.125 1.750 .750 2.115 1.502 1.922 .656 5/8-11 225 5/8-11X3.00
W59-32-32 W60-32-32 2.00 2.00 4.50 5.25 1.750 3.812 1.750 .875 2.490 2.002 2.406 .781 3/4-10 228 3/4-10X3.00
W59-40-40 W60-40-40 2.50 2.50 5.87 6.87 2.311 4.874 2.060 1.000 2.995 2.502 2.906 .906 7/8-9 232 **7/8-9X3.50
W59-48-48 W60-48-48 3.00 3.00 7.00 8.50 2.811 6.000 2.620 1.250 3.615 3.002 3.547 1.190 1-1/8-7 237 **1 1/8-7X4.50
**HHCS
CODE 61 FLAT SOCKET WELD - PIPE - ALL SIZES 500 PSI

FLANGES

C/S
PIPE PAD L HARDWARE

SIZE SIZE UNC-2B
W72-48-48 W91-48-48 3.00 3.00 5.12 5.31 2.438 4.188 1.380 1.120 3.615 3.002 3.547 .656 5/8-11 237 5/8-11X2.50
W72-56-56 W91-56-56 3.50 3.50 5.50 6.00 2.750 4.750 1.440 1.190 4.095 3.502 4.047 .656 5/8-11 241 5/8-11X2.75
W72-64-64 W91-64-64 4.00 4.00 6.00 6.38 3.062 5.125 1.500 1.250 4.595 4.002 4.578 .656 5/8-11 245 5/8-11X2.75
W72-80-80 W91-80-80 5.00 5.00 7.12 7.25 3.625 6.000 1.750 1.380 5.595 5.002 5.641 .656 5/8-11 253 5/8-11X3.00
FLANGES
S/S
109
866-FLANGES | 513.527.4444 | Fax 513.527.4449
109
Flat Socket Weld Tube
Figure 1 Figure 2
FIG. 1 FIG. 2
CODE 61 FLAT SOCKET WELD - TUBE

MOUNTING
PART NO. PART NO.
TUBE PAD HARDWARE
SIZE SIZE
W6-12-12 W62-12-12 .75 .75 2.060 2.560 .875 1.875 .750 .560 1.250 .625 .752 .406 3/8-16 214 3/8-16X1.50
W6-16-12 W62-16-12 1.00 .75 2.060 2.560 .875 1.875 .750 .560 1.250 .750 1.002 .406 3/8-16 214 3/8-16X1.50
W6-16-16 W62-16-16 1.00 1.00 2.310 2.750 1.031 2.062 .880 .630 1.560 .875 1.002 .406 3/8-16 219 3/8-16X1.75
W6-20-16 W62-20-16 1.25 1.00 2.310 2.750 1.031 2.062 .880 .630 1.560 1.000 1.252 .406 3/8-16 219 3/8-16X1.75
W6-20-20 W62-20-20 1.25 1.25 2.880 3.120 1.188 2.312 .940 .690 1.750 1.125 1.252 .469 7/16-14 222 7/16-14X1.75
W6-24-20 W62-24-20 1.50 1.25 2.880 3.120 1.188 2.312 .940 .690 1.750 1.250 1.502 .469 7/16-14 222 7/16-14X1.75
W6-24-24 W62-24-24 1.50 1.50 3.250 3.690 1.406 2.750 1.190 .750 2.115 1.375 1.502 .531 1/2-13 225 1/2-13X2.25
W6-28-24 W62-28-24 1.75 1.50 3.250 3.690 1.406 2.750 1.190 .750 2.115 1.500 1.752 .531 1/2-13 225 1/2-13X2.25
W6-32-32 W62-32-32 2.00 2.00 3.810 4.000 1.688 3.062 1.380 .875 2.490 1.875 2.002 .531 1/2-13 228 1/2-13X2.50
W6-36-32 W62-36-32 2.25 2.00 3.810 4.000 1.688 3.062 1.380 .875 2.490 2.000 2.252 .531 1/2-13 228 1/2-13X2.50
CODE 62 FLAT SOCKET WELD - TUBE

MOUNTING
PART NO. PART NO.
TUBE PAD HARDWARE
SIZE SIZE
W58-12-12 W63-12-12 .75 .75 2.50 2.95 .937 2.000 1.250 .560 1.250 .625 .752 .406 3/8-16 214 3/8-16X2.00
W58-16-12 W63-16-12 1.00 .75 2.50 2.95 .937 2.000 1.250 .560 1.250 .750 1.002 .406 3/8-16 214 3/8-16X2.00
W58-16-16 W63-16-16 1.00 1.00 2.75 3.19 1.093 2.250 1.500 .630 1.560 .875 1.002 .492 7/16-14 219 7/16-14X2.50
W58-20-16 W63-20-16 1.25 1.00 2.75 3.19 1.093 2.250 1.500 .630 1.560 1.000 1.252 .492 7/16-14 219 7/16-14X2.50
W58-20-20 W63-20-20 1.25 1.25 3.06 3.75 1.250 2.625 1.500 .690 1.750 1.125 1.252 .531 1/2-13 222 1/2-13X2.50
W58-24-20 W63-24-20 1.50 1.25 3.06 3.75 1.250 2.625 1.500 .690 1.750 1.250 1.502 .531 1/2-13 222 1/2-13X2.50
W58-24-24 W63-24-24 1.50 1.50 3.75 4.44 1.437 3.125 1.750 .750 2.115 1.375 1.502 .656 5/8-11 225 5/8-11X3.00
W58-28-24 W63-28-24 1.75 1.50 3.75 4.44 1.437 3.125 1.750 .750 2.115 1.500 1.752 .656 5/8-11 225 5/8-11X3.00
W58-32-32 W63-32-32 2.00 2.00 4.50 5.25 1.750 3.812 1.750 .875 2.490 1.875 2.002 .781 3/4-10 228 3/4-10X3.00
W58-36-32 W63-36-32 2.25 2.00 4.50 5.25 1.750 3.812 1.750 .875 2.490 2.000 2.252 .781 3/4-10 228 3/4-10X3.00
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Deep Socket Weld Pipe
VALVES
INLINE
VALVES
BALL
Figure 1 Figure 2
FIG. 1 FIG. 2
COUPLINGS
*No Spotface
QUICK
CODE 61 DEEP SOCKET WELD - PIPE
PIPE PAD M HARDWARE
SIZE SIZE UNC-2B
FIG. 1 FIG. 2
O-RING SHCS
COUPLINGS
W31-8-8 W3-8-8 .50 .50 1.81 2.13 .688 1.500 1.42 .63 1.000 .502 .855 .75 .344 5/16-18 210 5/16-18X1.25
WELD
W31-12-12 W3-12-12 .75 .75 1.97 2.56 .875 1.875 1.42 .71 1.250 .752 1.062 .75 .406 3/8-16 214 3/8-16X1.50
W31-16-16 W3-16-16 1.00 1.00 2.17 2.75 1.031 2.062 1.50 .71 1.560 1.002 1.328 .75 .406 3/8-16 219 3/8-16X1.50
W31-20-20 W3-20-20 1.25 1.25 2.68 3.12 1.188 2.312 1.61 .83 1.750 1.252 1.672 .87 .469 7/16-14 222 7/16-14X1.75
W31-24-24 W3-24-24 1.50 1.50 3.07 3.66 1.406 2.750 1.77 .98 2.115 1.502 1.922 .94 .531 1/2-13 225 1/2-13X1.75
W31-32-32 W3-32-32 2.00 2.00 3.54 4.00 1.688 3.062 1.77 .98 2.490 2.002 2.406 1.02 .531 1/2-13 228 1/2-13X1.75
W31-40-40 W3-40-40 2.50 2.50 4.09 4.49 2.000 3.500 1.97 .98 2.995 2.502 2.908 1.18 .531 1/2-13 232 1/2-13X1.75
W31-48-48 W3-48-48 3.00 3.00 4.88 5.28 2.438 4.188 1.97 1.06 3.615 3.002 3.547 1.34 .656 5/8-11 237 5/8-11X2.00
AND RETURN
SUCTION
PIPE PAD M HARDWARE
SIZE SIZE UNC-2B
W81-8-8 W80-8-8 .50 .50 1.81 2.21 .718 1.594 1.42 .63 1.000 .502 .855 .75 .344 5/16-18 210 5/16-18X1.25
W81-12-12 W80-12-12 .75 .75 2.17 2.80 .937 2.000 1.38 .83 1.250 .752 1.062 .87 .406 3/8-16 214 3/8-16X1.50
FLANGES
W81-16-16 W80-16-16 1.00 1.00 2.56 3.19 1.093 2.250 1.65 .98 1.560 1.002 1.328 .87 .492 7/16-14 219 7/16-14X1.75
W81-20-20 W80-20-20 1.25 1.25 3.07 3.75 1.250 2.625 1.77 1.06 1.750 1.252 1.672 .98 .531 1/2-13 222 1/2-13X1.75
C/S
W81-24-24 W80-24-24 1.50 1.50 3.70 4.41 1.437 3.125 1.97 1.18 2.115 1.502 1.922 1.10 .656 5/8-11 225 5/8-11X2.25
W81-32-32 W80-32-32 2.00 2.00 4.50 5.28 1.750 3.812 2.56 1.46 2.490 2.002 2.406 .94 .781 3/4-10 228 3/4-10X2.75
FLANGES
S/S
111
866-FLANGES | 513.527.4444 | Fax 513.527.4449
111
Deep Socket Weld Tube
Figure 1 Figure 2
FIG. 1 FIG. 2
*No Spotface
CODE 61 DEEP SOCKET WELD - TUBE

TUBE PAD M HARDWARE
SIZE SIZE UNC-2B
W51-12-12 W5-12-12 .75 .75 1.97 2.56 .875 1.875 1.42 .71 1.250 .625 .752 .560 .406 3/8-16 214 3/8-16X1.50
W51-16-12 W5-16-12 1.00 .75 1.97 2.56 .875 1.875 1.42 .71 1.250 .750 1.002 .560 .406 3/8-16 214 3/8-16X1.50
W51-16-16 W5-16-16 1.00 1.00 2.17 2.75 1.031 2.062 1.50 .71 1.560 .875 1.002 .630 .406 3/8-16 219 3/8-16X1.50
W51-20-16 W5-20-16 1.25 1.00 2.17 2.75 1.031 2.062 1.50 .71 1.560 1.000 1.252 .630 .406 3/8-16 219 3/8-16X1.50
W51-20-20 W5-20-20 1.25 1.25 2.68 3.12 1.188 2.312 1.61 .83 1.750 1.125 1.252 .690 .469 7/16-14 222 7/16-14X1.75
W51-24-20 W5-24-20 1.50 1.25 2.68 3.12 1.188 2.312 1.61 .83 1.750 1.250 1.502 .690 .469 7/16-14 222 7/16-14X1.75
W51-24-24 W5-24-24 1.50 1.50 3.07 3.66 1.406 2.750 1.77 .98 2.115 1.375 1.502 .750 .531 1/2-13 225 1/2-13X1.75
W51-28-24 W5-28-24 1.75 1.50 3.07 3.66 1.406 2.750 1.77 .98 2.115 1.500 1.752 .750 .531 1/2-13 225 1/2-13X1.75
W51-32-32 W5-32-32 2.00 2.00 3.54 4.00 1.688 3.062 1.77 .98 2.490 1.875 2.002 .870 .531 1/2-13 228 1/2-13X1.75
W51-36-32 W5-36-32 2.25 2.00 3.54 4.00 1.688 3.062 1.77 .98 2.490 2.000 2.252 .870 .531 1/2-13 228 1/2-13X1.75
W51-40-40 W5-40-40 2.50 2.50 4.09 4.49 2.000 3.500 1.97 .98 2.995 2.375 2.502 1.000 .531 1/2-13 232 1/2-13X1.75
W51-44-40 W5-44-40 2.75 2.50 4.09 4.49 2.000 3.500 1.97 .98 2.995 2.500 2.752 1.000 .531 1/2-13 232 1/2-13X1.75
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Butt Weld Pipe
VALVES
INLINE
VALVES
BALL
Figure 1 Figure 2
FIG. 1 FIG. 2
CODE 61 BUTT WELD - SCHEDULE 40 PIPE

PIPE PAD M HARDWARE
SIZE SIZE UNC-2B
W35-8 W34-8 .50 .50 1.81 2.13 .688 1.500 1.42 .63 1.000 .548 .840 .624 .344 5/16-18 210 5/16-18X1.25
W35-12 W34-12 .75 .75 1.97 2.56 .875 1.875 1.42 .71 1.250 .744 1.050 .846 .406 3/8-16 214 3/8-16X1.50
COUPLINGS
W35-16 W34-16 1.00 1.00 2.17 2.75 1.031 2.062 1.50 .71 1.560 .959 1.315 1.051 .406 3/8-16 219 3/8-16X1.50
QUICK
W35-20 W34-20 1.25 1.25 2.68 3.12 1.188 2.312 1.61 .83 1.750 1.280 1.660 1.382 .469 7/16-14 222 7/16-14X1.75
W35-24 W34-24 1.50 1.50 3.07 3.66 1.406 2.750 1.73 .98 2.115 1.502 1.900 1.612 .531 1/2-13 225 1/2-13X1.75
W35-32 W34-32 2.00 2.00 3.54 4.00 1.688 3.062 1.77 .98 2.490 1.941 2.375 2.069 .531 1/2-13 228 1/2-13X1.75
W35-40 W34-40 2.50 2.50 4.09 4.49 2.000 3.500 1.97 .98 2.995 2.325 2.875 2.471 .531 1/2-13 232 1/2-13X1.75
W35-48 W34-48 3.00 3.00 4.88 5.28 2.438 4.188 1.97 1.06 3.615 2.902 3.500 3.070 .656 5/8-11 237 5/8-11X2.00
W35-56 W34-56 3.50 3.50 5.35 5.98 2.750 4.750 2.19 1.06 4.095 3.366 4.000 3.550 .656 5/8-11 241 5/8-11X2.00
W35-64 W34-64 4.00 4.00 5.75 6.38 3.062 5.125 2.19 1.06 4.595 3.828 4.500 4.028 .656 5/8-11 245 5/8-11X2.75
W35-80* W34-80* 5.00 5.00 7.00 7.25 3.625 6.000 2.00 1.50 5.595 4.81 5.62 5.078 .660 5/8-11 253 5/8-11X2.50
* MADE FROM BAR STOCK
COUPLINGS
WELD
PIPE PAD M HARDWARE
O-RING FLAT FACE A B C D E F G H J L
SIZE SIZE UNC-2B
W24-8 W23-8 .50 .50 1.81 2.13 .688 1.500 1.42 .63 1.000 .548 .840 .344 5/16-18 210 5/16-18X1.25
W24-12 W23-12 .75 .75 1.97 2.56 .875 1.875 1.42 .71 1.250 .744 1.050 .406 3/8-16 214 3/8-16X1.50
W24-16 W23-16 1.00 1.00 2.17 2.75 1.031 2.062 1.50 .71 1.560 .959 1.315 .406 3/8-16 219 3/8-16X1.50
W24-20 W23-20 1.25 1.25 2.68 3.12 1.188 2.312 1.61 .83 1.750 1.280 1.660 .469 7/16-14 222 7/16-14X1.75
W24-24 W23-24 1.50 1.50 3.07 3.66 1.406 2.750 1.73 .98 2.115 1.502 1.900 .531 1/2-13 225 1/2-13X1.75
AND RETURN
W24-32 W23-32 2.00 2.00 3.54 4.00 1.688 3.062 1.77 .98 2.490 1.941 2.375 .531 1/2-13 228 1/2-13X1.75
SUCTION
W24-40 W23-40 2.50 2.50 4.09 4.49 2.000 3.500 1.97 .98 2.995 2.325 2.875 .531 1/2-13 232 1/2-13X1.75
W24-48 W23-48 3.00 3.00 4.88 5.28 2.438 4.188 1.97 1.06 3.615 2.902 3.500 .656 5/8-11 237 5/8-11X2.00

PIPE PAD M HARDWARE
O-RING FLAT FACE A B C D E F G H J L
SIZE SIZE UNC-2B
W27-8 W25-8 .50 .50 1.81 2.13 .688 1.500 1.42 .63 1.000 .466 .840 .344 5/16-18 210 5/16-18X1.25
W27-12 W25-12 .75 .75 1.97 2.56 .875 1.875 1.42 .71 1.250 .614 1.050 .406 3/8-16 214 3/8-16X1.50
FLANGES
W27-16 W25-16 1.00 1.00 2.17 2.75 1.031 2.062 1.50 .71 1.560 .817 1.315 .406 3/8-16 219 3/8-16X1.50
C/S
W27-20 W25-20 1.25 1.25 2.68 3.12 1.188 2.312 1.61 .83 1.750 1.162 1.660 .469 7/16-14 222 7/16-14X1.75
W27-24 W25-24 1.50 1.50 3.07 3.66 1.406 2.750 1.73 .98 2.115 1.340 1.900 .531 1/2-13 225 1/2-13X1.75
W27-32 W25-32 2.00 2.00 3.54 4.00 1.688 3.062 1.77 .98 2.490 1.689 2.375 .531 1/2-13 228 1/2-13X1.75
W27-40 W25-40 2.50 2.50 4.09 4.49 2.000 3.500 1.97 .98 2.995 2.127 2.875 .531 1/2-13 232 1/2-13X1.75
W27-48 W25-48 3.00 3.00 4.88 5.28 2.438 4.188 1.97 1.06 3.615 2.626 3.500 .656 5/8-11 237 5/8-11X2.00
*NOTE: Also available in sizes 3 1/2”, 4”, and 5”. Consult factory for specifications.
FLANGES
S/S
113
866-FLANGES | 513.527.4444 | Fax 513.527.4449
113
Butt Weld Pipe
Figure 1 Figure 2

PIPE PAD L HARDWARE
SIZE SIZE UNC-2B
W28-8 W26-8 .50 .50 1.81 2.21 .718 1.594 1.42 .63 1.000 .548 .840 .344 5/16-18 210 5/16-18X1.25
W28-12 W26-12 .75 .75 2.17 2.80 .937 2.000 1.38 .83 1.250 .744 1.050 .406 3/8-16 214 3/8-16X1.50
W28-16 W26-16 1.00 1.00 2.56 3.19 1.093 2.250 1.61 .83 1.560 .959 1.315 .492 7/16-14 219 7/16-14X1.75
W28-20 W26-20 1.25 1.25 3.07 3.75 1.250 2.625 1.73 .98 1.750 1.280 1.660 .531 1/2-13 222 1/2-13X1.75
W28-24 W26-24 1.50 1.50 3.70 4.41 1.437 3.125 2.17 1.18 2.115 1.502 1.900 .656 5/8-11 225 5/8-11X2.25
W28-32 W26-32 2.00 2.00 4.50 5.28 1.750 3.812 2.56 1.46 2.490 1.941 2.375 .781 3/4-10 228 3/4-10X3.00
W28-40 W26-40 2.50 2.50 5.00 6.88 2.311 4.874 2.37 1.50 2.995 2.325 2.875 .906 7/8-9 232 7/8-9X3.00
W28-48 W26-48 3.00 3.00 6.00 8.50 2.811 6.000 2.96 2.00 3.615 2.902 3.500 1.190 1 1/8-7 237 1 1/8-7X4.00

PIPE PAD L HARDWARE
SIZE SIZE UNC-2B
W30-8 W29-8 .50 .50 1.81 2.21 .718 1.594 1.42 .63 1.000 .466 .840 .344 5/16-18 210 5/16-18X1.25
W30-12 W29-12 .75 .75 2.17 2.80 .937 2.000 1.38 .83 1.250 .614 1.050 .406 3/8-16 214 3/8-16X1.50
W30-16 W29-16 1.00 1.00 2.56 3.19 1.093 2.250 1.61 .83 1.560 .817 1.315 .492 7/16-14 219 7/16-14X1.75
W30-20 W29-20 1.25 1.25 3.07 3.75 1.250 2.625 1.73 .98 1.750 1.162 1.660 .531 1/2-13 222 1/2-13X1.75
W30-24 W29-24 1.50 1.50 3.70 4.41 1.437 3.125 2.17 1.18 2.115 1.340 1.900 .656 5/8-11 225 5/8-11X2.25
W30-32 W29-32 2.00 2.00 4.50 5.28 1.750 3.812 2.56 1.46 2.490 1.689 2.375 .781 3/4-10 228 3/4-10X3.00
W30-40 W29-40 2.50 2.50 5.00 6.88 2.311 4.874 2.37 1.50 2.995 2.127 2.875 .906 7/8-9 232 7/8-9X3.00
W30-48 W29-48 3.00 3.00 6.00 8.50 2.811 6.000 2.96 2.00 3.615 2.626 3.500 1.190 1 1/8-7 237 1 1/8-7X4.00
CODE 62 BUTT WELD - SCHEDULE XXS PIPE

PIPE PAD L HARDWARE
SIZE SIZE UNC-2B
W33-8 W32-8 .50 .50 1.81 2.21 .718 1.594 1.42 .63 1.000 .254 .840 .344 5/16-18 210 5/16-18X1.25
W33-12 W32-12 .75 .75 2.17 2.80 .937 2.000 1.38 .83 1.250 .436 1.050 .406 3/8-16 214 3/8-16X1.50
W33-16 W32-16 1.00 1.00 2.56 3.19 1.093 2.250 1.61 .83 1.560 .601 1.315 .492 7/16-14 219 7/16-14X1.75
W33-20 W32-20 1.25 1.25 3.07 3.75 1.250 2.625 1.73 .98 1.750 .898 1.660 .531 1/2-13 222 1/2-13X1.75
W33-24 W32-24 1.50 1.50 3.70 4.41 1.437 3.125 2.17 1.18 2.115 1.102 1.900 .656 5/8-11 225 5/8-11X2.25
W33-32 W32-32 2.00 2.00 4.50 5.28 1.750 3.812 2.56 1.46 2.490 1.505 2.375 .781 3/4-10 228 3/4-10X3.00
W33-40 W32-40 2.50 2.50 5.00 6.88 2.311 4.874 2.37 1.50 2.995 1.773 2.875 .906 7/8-9 232 7/8-9X3.00
W33-48 W32-48 3.00 3.00 6.00 8.50 2.811 6.000 2.96 2.00 3.615 2.302 3.500 1.190 1 1/8-7 237 1 1/8-7X4.00
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Saddle Weld
VALVES
INLINE
VALVES
BALL
Figure 1 Figure 2
FIG. 1 FIG. 2
*No Spotface
COUPLINGS
CODE 61 SADDLE WELD - PIPE
QUICK
PIPE PAD N HARDWARE
O-RING FLAT FACE A B C D E F G H J K L M
SIZE SIZE UNC-2B
W8-12-12 W7-12-12 .75 .75 1.97 2.56 .875 1.875 1.775 1.42 .71 1.250 .752 1.54 .532 .406 3/8-16 214 3/8-16X1.50
W8-16-16 W7-16-16 1.00 1.00 2.17 2.75 1.031 2.062 1.912 1.50 .71 1.560 1.002 1.81 .665 .406 3/8-16 219 3/8-16X1.50
W8-20-20 W7-20-20 1.25 1.25 2.68 3.12 1.188 2.312 2.146 1.61 .83 1.750 1.252 2.22 .837 .469 7/16-14 222 7/16-14X1.75
W8-24-24 W7-24-24 1.50 1.50 3.07 3.66 1.406 2.750 2.290 1.77 .98 2.115 1.502 2.50 .957 .531 1/2-13 225 1/2-13X1.75
W8-32-32 W7-32-32 2.00 2.00 3.54 4.00 1.688 3.062 2.340 1.77 .98 2.490 2.002 3.12 1.200 .531 1/2-13 228 1/2-13X1.75
COUPLINGS
W8-40-40 W7-40-40 2.50 2.50 4.09 4.49 2.000 3.500 2.660 1.97 .98 2.995 2.502 3.62 1.451 .531 1/2-13 232 1/2-13X1.75
WELD
CODE 61 SADDLE WELD - TUBE
MOUNTING
PART NO. PART NO.
TUBE PAD N HARDWARE
SIZE SIZE UNC-2B
W87-12-12 W69-12-12 .75 .75 1.97 2.56 .875 1.875 1.420 1.41 .71 1.250 .614 1.05 .382 .406 3/8-16 214 3/8-16X1.50
AND RETURN
W87-16-12 W69-16-12 1.00 .75 1.97 2.56 .875 1.875 1.737 1.42 .71 1.250 .752 1.54 .507 .406 3/8-16 214 3/8-16X1.50
SUCTION
W87-16-16 W69-16-16 1.00 1.00 2.17 2.75 1.031 2.062 1.500 1.47 .71 1.560 .817 1.32 .507 .406 3/8-16 219 3/8-16X1.50
W87-20-16 W69-20-16 1.25 1.00 2.17 2.75 1.031 2.062 1.858 1.50 .71 1.560 1.002 1.81 .632 .406 3/8-16 219 3/8-16X1.50
W87-20-20 W69-20-20 1.25 1.25 2.68 3.12 1.188 2.312 1.665 1.61 .83 1.750 1.162 1.66 .632 .469 7/16-14 222 7/16-14X1.75
W87-24-20 W69-24-20 1.50 1.25 2.68 3.12 1.188 2.312 2.022 1.61 .83 1.750 1.252 2.22 .757 .469 7/16-14 222 7/16-14X1.75
W87-28-24 W69-28-24 1.75 1.50 3.07 3.66 1.406 2.750 2.198 1.77 .98 2.115 1.502 2.50 .882 .531 1/2-13 225 1/2-13X1.75
W87-32-32 W69-32-32 2.00 2.00 3.54 4.00 1.688 3.062 2.262 1.77 .98 2.490 1.689 2.38 1.007 .531 1/2-13 228 1/2-13X1.75
W87-36-32 W69-36-32 2.25 2.00 3.54 4.00 1.688 3.062 2.247 1.77 .98 2.490 2.002 3.12 1.132 .531 1/2-13 228 1/2-13X1.75
FLANGES
C/S
FLANGES
S/S
115
866-FLANGES | 513.527.4444 | Fax 513.527.4449
115
NPTF Tank Pilot
CODE 61 NPTF TANK PILOT

PIPE PAD K L
SIZE SIZE UNC-2B NPTF
W22-12 .750 .750 1.97 2.56 .875 1.875 1.42 1.30 .71 .752 1.375 3/8-16 3/4-14
W22-16 1.00 1.00 2.17 2.75 1.031 2.062 1.50 1.37 .71 1.002 1.500 3/8-16 1-11.5
W22-20 1.25 1.25 2.68 3.12 1.188 2.312 1.61 1.49 .83 1.252 1.750 7/16-14 1 1/4-11.5
W22-24 1.50 1.50 3.07 3.66 1.406 2.750 1.77 1.64 .98 1.502 2.125 1/2-13 1 1/2-11.5
W22-32 2.00 2.00 3.54 4.00 1.688 3.062 1.77 1.65 .98 2.002 2.500 1/2-13 2-11.5
W22-40 2.50 2.50 4.09 4.49 2.000 3.500 1.97 1.85 .98 2.502 3.250 1/2-13 2 1/2-8
W22-48 3.00 3.00 4.88 5.28 2.438 4.188 1.97 1.85 1.06 3.002 3.625 5/8-11 3-8
W22-56 3.50 3.50 5.35 5.98 2.750 4.750 1.89 1.77 1.06 3.504 4.125 5/8-11 3 1/2-8
W22-64 4.00 4.00 5.75 6.38 3.062 5.125 1.89 1.77 1.06 3.898 4.625 5/8-11 4-8
Female NPTF thread added to facilitate pump suction line and return line applications.
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Elbow Block
VALVES
INLINE
FIG. 1 & 2
FIG. 1
VALVES
BALL
FIG. 2
FIG. 1 ONLY Figure 2

Figure 1
CODE 61 ELBOW BLOCK
COUPLINGS
QUICK
PAD I
SIZE UNC-2B
W14-12 W15-12 .75 2.62 2.47 1.875 .875 2.25 .75 1.250 .406 3/8-16 1.03 1.03 214 3/8-16X3.00
W14-16 W15-16 1.00 2.82 2.47 2.062 1.031 2.47 1.00 1.560 .406 3/8-16 1.16 1.09 219 3/8-16X3.25
W14-20 W15-20 1.25 3.19 2.97 2.312 1.188 2.97 1.25 1.750 .469 7/16-14 1.44 1.31 222 7/16-14X4.00
W14-24 W15-24 1.50 3.75 3.47 2.750 1.406 3.47 1.50 2.115 .531 1/2-13 1.62 1.62 225 1/2-13X4.50
W14-32 W15-32 2.00 4.00 3.97 3.062 1.688 3.97 2.00 2.490 .531 1/2-13 1.91 1.91 228 1/2-13X5.00
COUPLINGS
WELD
CODE 62 ELBOW BLOCK
PAD I
SIZE UNC-2B
W12-12 W13-12 .75 2.82 2.47 2.000 .937 2.47 .750 1.250 .406 3/8-16 1.19 1.06 214 3/8-16X3.50
W12-16 W13-16 1.00 3.19 2.97 2.250 1.093 2.97 1.00 1.560 .469 7/16-14 1.38 1.38 219 7/16-14X4.00
W12-20 W13-20 1.25 3.75 3.47 2.625 1.250 3.47 1.25 1.750 .531 1/2-13 1.62 1.41 222 1/2-13X4.50
AND RETURN
W12-24 W13-24 1.50 4.50 3.97 3.125 1.437 3.97 1.50 2.115 .656 5/8-11 1.88 1.75 225 5/8-11X5.00
SUCTION
W12-32 W13-32 2.00 5.25 4.97 3.812 1.75 4.97 2.00 2.490 .781 3/4-10 2.25 2.50 228 3/4-10X6.00
FLANGES
C/S
FLANGES
S/S
117
866-FLANGES | 513.527.4444 | Fax 513.527.4449
117
Tee Junction Block
FIG. 1 & 2
FIG. 1
FIG. 2
FIG. 1 & 2 FIG. 1 ONLY

Figure 1 Figure 2
CODE 61 TEE JUNCTION BLOCK

PAD L
O-RING FLAT FACE A B C D F G H J K
SIZE UNC-2B
W17-12 W16-12 .75 2.62 2.75 1.875 .875 2.25 1.22 1.250 .75 .406 3/8-16 214 3/8-16X3.00
W17-16 W16-16 1.00 2.82 2.97 2.062 1.031 2.50 1.34 1.560 1.00 .406 3/8-16 219 3/8-16X3.25
W17-20 W16-20 1.25 3.19 3.47 2.312 1.188 3.00 1.56 1.750 1.25 .469 7/16-14 222 7/16-14X4.00
W17-24 W16-24 1.50 3.75 3.97 2.750 1.406 3.50 1.88 2.115 1.50 .531 1/2-13 225 1/2-13X4.50
W17-32 W16-32 2.00 4.00 4.25 3.062 1.688 3.97 2.09 2.490 2.00 .531 1/2-13 228 1/2-13X5.00

PAD L
SIZE UNC-2B
W19-12 W18-12 .75 2.81 2.97 2.00 .937 2.50 1.310 1.250 .750 .406 3/8-16 214 3/8-16X3.25
W19-16 W18-16 1.00 3.19 3.47 2.25 1.093 3.00 1.620 1.560 1.000 .492 7/16-14 219 7/16-14X4.00
W19-20 W18-20 1.25 3.75 3.97 2.625 1.250 3.50 1.880 1.750 1.250 .531 1/2-13 222 1/2-13X4.50
W19-24 W18-24 1.50 4.50 4.47 3.125 1.437 4.00 2.120 2.115 1.500 .656 5/8-11 225 5/8-11X5.00
W19-32 W18-32 2.00 5.25 4.97 3.812 1.750 4.97 2.750 2.490 1.940 .781 3/4-10 228 3/4-10X6.00
Mounting kit available on O-Ring grooved flanges by simply adding suffix letter ‘U’ to part number.
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Threaded Elbow
FIG. 1
VALVES
INLINE
FIG. 2
Figure 1
VALVES
BALL
Figure 2
CODE 61 ELBOW SAE STRAIGHT THREAD
COUPLINGS
PAD N
QUICK
O-RING FLAT FACE A B C D E F G H J K L M HARDWARE
SIZE UNC-2B
W164-12-12 W165-12-12 .75 1.69 2.56 .875 1.875 2.28 1.44 1.25 .875 1.250 .752 1-1/16-12 .406 3/8-16 214 3/8-16X2.00
W164-16-16 W165-16-16 1.00 1.94 2.75 1.031 2.062 2.62 1.66 1.50 1.062 1.560 1.002 1-5/16-12 .406 3/8-16 219 3/8-16X2.25
W164-20-20 W165-20-20 1.25 2.19 3.12 1.188 2.312 3.00 1.91 1.81 1.188 1.750 1.252 1-5/8-12 .469 7/16-14 222 7/16-14X2.75
W164-24-24 W165-24-24 1.50 2.56 3.69 1.406 2.750 3.33 2.05 2.00 1.312 2.115 1.502 1-7/8-12 .531 1/2-13 225 1/2-13X3.00
W164-32-32 W165-32-32 2.00 3.06 4.33 1.688 3.062 3.81 2.28 2.50 1.656 1.490 2.002 2-1/2-12 .531 1/2-13 228 1/2-13X3.50
CODE 61 ELBOW NPTF THREAD
COUPLINGS
MOUNTING
WELD
PART NO. PART NO.
PAD N HARDWARE
SIZE UNC-2B
W168-12-12 W170-12-12 .75 1.69 2.56 .875 1.875 2.28 1.44 1.25 .875 1.250 .752 .75 .406 3/8-16 214 3/8-16X2.00
W168-16-16 W170-16-16 1.00 1.94 2.75 1.031 2.062 2.62 1.66 1.50 1.062 1.560 1.002 1.00 .406 3/8-16 219 3/8-16X2.25
W168-20-20 W170-20-20 1.25 2.19 3.12 1.188 2.312 3.00 1.91 1.81 1.188 1.750 1.252 1.25 .469 7/16-14 222 7/16-14X2.75
W168-24-24 W170-24-24 1.50 2.56 3.69 1.406 2.750 3.33 2.05 2.00 1.312 2.115 1.502 1.50 .531 1/2-13 225 1/2-13X3.00
W168-32-32 W170-32-32 2.00 3.06 4.33 1.688 3.062 3.81 2.28 2.50 1.656 2.490 2.002 2.00 .531 1/2-13 228 1/2-13X3.50
AND RETURN
CODE 62 ELBOW SAE STRAIGHT THREAD
SUCTION
PAD N HARDWARE
SIZE UNC-2B
W184-12-12 W185-12-12 .75 1.94 2.75 .937 2.000 2.62 1.66 1.50 1.062 1.250 .752 1-1/16-12 .406 3/8-16 214 3/8-16X2.25
W184-16-16 W185-16-16 1.00 2.19 3.12 1.093 2.250 3.00 1.91 1.81 1.188 1.560 1.002 1-5/16-12 .492 7/16-14 219 7/16-14X2.50
W184-20-20 W185-20-20 1.25 2.56 3.69 1.250 2.625 3.32 2.05 2.00 1.312 1.750 1.252 1-5/8-12 .531 1/2-13 222 1/2-13X3.00
W184-24-24 W185-24-24 1.50 3.06 4.33 1.437 3.125 3.81 2.28 2.50 1.656 2.115 1.502 1-7/8-12 .656 5/8-11 225 5/8-11X3.50
CODE 62 ELBOW NPTF THREAD

FLANGES

PAD N
C/S
O-RING FLAT FACE A B C D E F G H J K L M HARDWARE

SIZE UNC-2B
W188-12-12 W180-12-12 .75 1.94 2.75 .937 2.000 2.62 1.66 1.50 1.062 1.250 .752 .75 .406 3/8-16 214 3/8-16X2.25
W188-16-16 W180-16-16 1.00 2.19 3.12 1.093 2.250 3.00 1.91 1.81 1.188 1.560 1.002 1.00 .492 7/16-14 219 7/16-14X2.50
W188-20-20 W180-20-20 1.25 2.56 3.69 1.250 2.625 3.32 2.05 2.00 1.312 1.750 1.252 1.25 .531 1/2-13 222 1/2-13X3.00
W188-24-24 W180-24-24 1.50 3.06 4.33 1.437 3.125 3.81 2.28 2.50 1.656 2.115 1.502 1.50 .656 5/8-11 225 5/8-11X3.50
Mounting kit available on O-Ring grooved flanges by simply adding suffix letter ‘U’ to part number.
FLANGES
S/S
119
866-FLANGES | 513.527.4444 | Fax 513.527.4449
119
Socket Weld Pipe Elbow
P
FIG. 1
R
FIG. 2
Figure 1
Figure 2
CODE 61 ELBOW SOCKET WELD - PIPE

PAD R HARDWARE
O-RING FLAT FACE A B C D E F G H J K L M N P
SIZE UNC-2B
W176-12-12 W169-12-12 .75 1.69 2.56 .875 1.875 2.28 1.44 1.25 .875 1.250 .752 1.062 .75 .56 .406 3/8-16 214 3/8-16X2.00
W176-16-16 W169-16-16 1.00 1.94 2.75 1.031 2.062 2.62 1.66 1.50 1.062 1.560 1.002 1.328 1.00 .56 .406 3/8-16 219 3/8-16X2.25
W176-20-20 W169-20-20 1.25 2.19 3.12 1.188 2.312 3.00 1.91 1.81 1.188 1.750 1.252 1.672 1.25 .62 .469 7/16-14 222 7/16-14X2.75
W176-24-24 W169-24-24 1.50 2.56 3.69 1.406 2.750 3.33 2.05 2.00 1.312 2.115 1.502 1.922 1.50 .69 .531 1/2-13 225 1/2-13X3.00
W176-32-32 W169-32-32 2.00 3.06 4.33 1.688 3.062 3.81 2.28 2.50 1.656 2.490 2.002 2.406 2.00 .75 .531 1/2-13 228 1/2-13X3.50
W176-40-40 W169-40-40 2.50 3.56 5.00 2.000 3.500 4.66 2.88 2.78 1.900 2.995 2.502 2.906 2.50 .75 .531 1/2-13 232 1/2-13X5.00
W176-48-48 W169-48-48 3.00 4.00 5.50 2.438 4.188 5.00 3.00 3.35 2.400 3.615 3.002 3.547 3.00 .75 .656 5/8-11 237 5/8-11X6.00

PAD R HARDWARE
SIZE UNC-2B
W186-12-12 W189-12-12 .75 1.94 2.75 .937 2.000 2.62 1.66 1.50 1.062 1.250 .752 1.062 .75 .56 .406 3/8-16 214 3/8-16X2.25
W186-16-16 W189-16-16 1.00 2.19 3.12 1.093 2.250 3.00 1.91 1.81 1.188 1.560 1.002 1.328 1.00 .62 .492 7/16-14 219 7/16-14X2.50
W186-20-20 W189-20-20 1.25 2.56 3.69 1.250 2.625 3.32 2.05 2.00 1.312 1.750 1.252 1.672 1.25 .69 .531 1/2-13 222 1/2-13X3.00
W186-24-24 W189-24-24 1.50 3.06 4.33 1.437 3.125 3.81 2.28 2.50 1.656 2.115 1.502 1.922 1.50 .75 .656 5/8-11 225 5/8-11X3.50
W186-32-32 W189-32-32 2.00 3.56 5.00 1.750 3.812 4.66 2.88 2.69 1.900 2.490 2.002 2.406 2.00 .75 .781 3/4-10 228 3/4-10X4.50
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Socket Weld Tube Elbow
VALVES
P
INLINE
FIG. 1
R
FIG. 2
VALVES
Figure 1
BALL
COUPLINGS
QUICK
Figure 2
CODE 61 ELBOW SOCKET WELD - TUBE

PAD R HARDWARE
SIZE UNC-2B
COUPLINGS
W172-12-12 W177-12-12 .75 1.69 2.56 .875 1.875 2.28 1.44 1.25 .875 1.250 .752 .752 .625 .312 .406 3/8-16 214 3/8-16X2.00
WELD
W172-16-12 W177-16-12 .75 1.69 2.56 .875 1.875 2.28 1.44 1.25 .875 1.250 .752 1.002 .750 .438 .406 3/8-16 214 3/8-16X2.00
W172-16-16 W177-16-16 1.00 1.94 2.75 1.031 2.062 2.62 1.66 1.50 1.062 1.560 1.002 1.002 .875 .438 .406 3/8-16 219 3/8-16X2.25
W172-20-16 W177-20-16 1.00 1.94 2.75 1.031 2.062 2.62 1.66 1.50 1.062 1.560 1.002 1.252 1.000 .500 .406 3/8-16 219 3/8-16X2.25
W172-20-20 W177-20-20 1.25 2.19 3.12 1.188 2.312 3.00 1.91 1.81 1.188 1.750 1.252 1.252 1.125 .500 .469 7/16-14 222 7/16-14X2.75
W172-24-20 W177-24-20 1.25 2.19 3.12 1.188 2.312 3.00 1.91 1.81 1.188 1.750 1.252 1.502 1.250 .562 .469 7/16-14 222 7/16-14X2.75
W172-24-24 W177-24-24 1.50 2.56 3.69 1.406 2.750 3.33 2.05 2.00 1.312 2.115 1.502 1.502 1.375 .562 .531 1/2-13 225 1/2-13X3.00
W172-28-24 W177-28-24 1.50 2.56 3.69 1.406 2.750 3.33 2.05 2.00 1.312 2.115 1.502 1.752 1.500 .562 .531 1/2-13 225 1/2-13X3.00
AND RETURN
W172-32-32 W177-32-32 2.00 3.06 4.33 1.688 3.062 3.81 2.28 2.50 1.656 2.490 2.002 2.002 1.875 .625 .531 1/2-13 228 1/2-13X3.50
SUCTION
W172-36-32 W177-36-32 2.00 3.06 4.33 1.688 3.062 3.81 2.28 2.50 1.656 2.490 2.002 2.252 2.000 .625 .531 1/2-13 228 1/2-13X3.50
CODE 62 ELBOW SOCKET WELD - TUBE

PAD R HARDWARE
SIZE UNC-2B
W182-12-12 W187-12-12 .75 1.94 2.75 .937 2.000 2.62 1.66 1.50 1.062 1.250 .752 .752 .625 .56 .406 3/8-16 214 3/8-16X2.25
W182-16-12 W187-16-12 .75 1.94 2.75 .937 2.000 2.62 1.66 1.50 1.062 1.250 .752 1.002 .750 .62 .406 3/8-16 214 3/8-16X2.25
W182-16-16 W187-16-16 1.00 2.19 3.12 1.093 2.250 3.00 1.91 1.81 1.188 1.560 1.002 1.002 .875 .62 .492 7/16-14 219 7/16-14X2.50
FLANGES
W182-20-16 W187-20-16 1.00 2.19 3.12 1.093 2.250 3.00 1.91 1.81 1.188 1.560 1.002 1.252 1.000 .69 .492 7/16-14 219 7/16-14X2.50
C/S
W182-20-20 W187-20-20 1.25 2.56 3.69 1.250 2.625 3.32 2.05 2.00 1.312 1.750 1.252 1.252 1.125 .69 .531 1/2-13 222 1/2-13X3.00
W182-24-20 W187-24-20 1.25 2.56 3.69 1.250 2.625 3.32 2.05 2.00 1.312 1.750 1.252 1.502 1.250 .75 .531 1/2-13 222 1/2-13X3.00
W182-24-24 W187-24-24 1.50 3.06 4.33 1.437 3.125 3.81 2.28 2.50 1.656 2.115 1.502 1.502 1.375 .75 .656 5/8-11 225 5/8-11X3.50
W182-28-24 W187-28-24 1.50 3.06 4.33 1.437 3.125 3.81 2.28 2.50 1.656 2.115 1.502 1.752 1.500 .75 .656 5/8-11 225 5/8-11X3.50
FLANGES
S/S
121
866-FLANGES | 513.527.4444 | Fax 513.527.4449
121
3000 Series Square Pattern
Figure 1 Figure 2
FIG. 1 FIG. 2
3000 SERIES SQUARE NPTF THREAD

PAD H HARDWARE
SIZE UNC-2B
W65-12 W75-12 .75 2.25 1.438 1.25 1.250 .752 .75 .406 3/8-16 214 3/8-16X2.00
W65-16 W75-16 1.00 3.00 2.000 1.50 1.560 1.002 1.00 .531 1/2-13 219 1/2-13X2.25
W65-20 W75-20 1.25 3.00 2.000 1.50 1.750 1.252 1.25 .531 1/2-13 222 1/2-13X2.25
W65-24 W75-24 1.50 4.00 2.750 1.75 2.115 1.502 1.50 .656 5/8-11 225 5/8-11X2.75
W65-32 W75-32 2.00 4.00 2.750 1.75 2.490 2.002 2.00 .656 5/8-11 228 5/8-11X2.75
W65-40 W75-40* 2.50 5.50 3.750 2.25 2.995 2.502 2.50 .906 7/8-9 232 7/8-9X3.50*
W65-48 W75-48* 3.00 5.50 3.750 2.25 3.615 3.002 3.00 .906 7/8-9 237 7/8-9X3.50*
Figure 1 Figure 2
FIG. 1 FIG. 2
3000 SERIES SQUARE SOCKET WELD - PIPE

PAD J HARDWARE
O-RING FLAT FACE A B C D E F G H
SIZE UNC-2B
W66-12 W76-12 .75 2.25 1.438 1.00 .50 1.250 .752 1.062 .406 3/8-16 214 3/8-16X1.75
W66-16 W76-16 1.00 3.00 2.000 1.00 .50 1.560 1.002 1.328 .531 1/2-13 219 1/2-13X1.75
W66-20 W76-20 1.25 3.00 2.000 1.00 .50 1.750 1.252 1.672 .531 1/2-13 222 1/2-13X1.75
W66-24 W76-24 1.50 4.00 2.750 1.25 .62 2.115 1.502 1.922 .656 5/8-11 225 5/8-11X2.25
W66-32 W76-32 2.00 4.00 2.750 1.25 .62 2.490 2.002 2.406 .656 5/8-11 228 5/8-11X2.25
W66-40 W76-40* 2.50 5.50 3.750 1.50 .75 2.995 2.502 2.906 .906 7/8-9 232 7/8-9X2.75*
W66-48 W76-48* 3.00 5.50 3.750 1.50 .75 3.615 3.002 3.547 .906 7/8-9 237 7/8-9X2.75*
W66-64 W76-64* 4.00 7.00 5.000 2.00 .75 4.625 3.880 4.578 1.060 1-8 347 1-8X3.50*
*HHCS provided on 7/8” size bolts and larger.

866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
VALVES
INLINE
VALVES
BALL
Figure 1
Figure 2
FIG. 1 FIG. 2
COUPLINGS
PIPE J
QUICK
SIZE UNC-2B
FIG. 1 FIG. 2 O-RING HHCS
W56-40 W57-40 2.50 5.50 3.750 1.75 .75 2.995 2.12 2.911 .94 7/8-9 232 7/8-9X3.50
W56-48 W57-48 3.00 6.75 4.750 2.00 .75 3.615 2.62 3.540 1.06 1-8 236 1-8X4.00
W56-56 W57-56 3.50 8.00 5.500 2.40 1.002 3.990 3.00 4.045 1.31 1 1/4-7 342 1 1/4X5.00
W56-64 W57-64 4.00 8.50 6.000 2.40 1.002 4.490 3.44 4.550 1.31 1 1/4-7 346 1 1/4X5.00
W56-80 W57-80 5.00 10.00 7.250 2.90 1.002 5.365 4.31 5.625 1.56 1 1/2-6 353 1 1/2X6.00
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
123
866-FLANGES | 513.527.4444 | Fax 513.527.4449
123
FLANGES –
STAINLESS STEEL
AFP SUPPLIED 18-8(304) STAINLESS STEEL

FASTENER TORQUE REQUIREMENTS
CODE 61 SAE J518-1 / ISO 6162-1 BOLT PATTERN CODE 62 SAE J518-2 / ISO 6162-2 BOLT PATTERN
SOCKET AND HEX HEAD SOCKET AND HEX HEAD

FASTENER TORQUE VALUE FASTENER TORQUE VALUE
DASH SIZE INCH SIZE 18-8 UNC (LB-FT) DASH SIZE INCH SIZE 18-8 UNC (LB-FT)
-8 1/2” 9 -8 1/2” 9
-12 3/4” 16 -12 3/4” 16
-16 1” 16 -16 1” 26
-20 1 1/4” 26 -20 1 1/4” 40
-24 1 1/2” 40 -24 1 1/2” 79
-32 2” 40 -32 2” 140*
-40 2 1/2” 40
-48 3” 79 *-32 CODE 62 Hex Head torque value is 97 (lb-ft).
-56 3 1/2” 79
-64 4” 79
-80 5” 79
NOTE - All stainless steel fastener torque values were configured using regular grade Never-Seez® as lubricant.
Use of another lubricant on fasteners can affect torque value. Consult factory for additional information.
* The use of stainless steel fasteners may reduce the maximum working pressure of the assembly.
866-FLANGES | 513.527.4444 | Fax 513.527.4449

FLANGES – STAINLESS STEEL
TEST POINT
ADAPTERS
SAE J518 Split/Captive Flanges
For SAE Flanged Head Connection
CD 61 - CD 62 126
VALVES
INLINE
CD 61 - CD 62 Split Flange Adapters 127
SAE 4 Bolt Flanges

CD 61 - CD 62 Blanking 128
CD 61 - CD 62 NPTF 129
CD 61 - CD 62 SAE Thread 130
VALVES
BALL
CD 61 - CD 62 Flat Socket Weld Pipe 131
CD 61 - CD 62 Deep Socket Weld Pipe 132
CD 61 - CD 62 Elbow Socket Weld Pipe 135
COUPLINGS
CD 61 - CD 62 Elbow Block 136
QUICK
CD 61 - CD 62 Tee Junction Block 137
Square 4 Bolt Flanges

138
COUPLINGS
3000 Series NPTF Thread
WELD
The standard grade of material for Anchor’s stainless steel flanges is 316L. Other
material grades are available upon request. In addition, material grades and flange
dimensions may vary due to availability of raw material.
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

125
J518 Split & Captive Flange

MOUNTING
PART NO. SIZE
O-RING HHCS
8SF-2-SS 8SFO-SS .50 .86 2.12 1.500 .75 .50 1.219 .955 .245 .344 210 5/16-18X1.25
12SF-2-SS 12SFO-SS .75 .98 2.56 1.875 .88 .56 1.531 1.265 .245 .406 214 3/8-16X1.25
16SF-2-SS 16SFO-SS 1.00 1.11 2.75 2.062 .94 .62 1.781 1.515 .295 .406 219 3/8-16X1.25
20SF-2-SS 20SFO-SS 1.25 1.39 3.12 2.312 .88 .56 2.031 1.720 .295 .469 222 7/16-14X1.50
24SF-2-SS 24SFO-SS 1.50 1.58 3.69 2.750 1.00 .62 2.406 2.000 .295 .531 225 1/2-13X1.50
32SF-2-SS 32SFO-SS 2.00 1.86 4.00 3.062 1.03 .62 2.844 2.470 .355 .531 228 1/2-13X1.50
40SF-2-SS 40SFO-SS 2.50 2.09 4.50 3.500 1.50 .75 3.344 2.950 .355 .531 232 1/2-13X1.75
48SF-2-SS 48SFO-SS 3.00 2.53 5.31 4.188 1.62 .88 4.031 3.580 .355 .656 237 5/8-11X1.75
56SF-2-SS 56SFO-SS 3.50 2.70 6.00 4.750 1.12 .88 4.531 4.030 .422 .656 241 5/8-11X2.00
64SF-2-SS 64SFO-SS 4.00 2.95 6.38 5.125 1.38 1.00 5.031 4.530 .422 .656 245 5/8-11X2.00

MOUNTING
PART NO. SIZE
O-RING HHCS
8SFX-2-SS 8SFXO-SS .50 .89 2.22 1.594 .88 .62 1.281 .970 .285 .344 210 5/16-18X1.25
12SFX-2-SS 12SFXO-SS .75 1.14 2.81 2.000 1.12 .75 1.656 1.280 .325 .406 214 3/8-16X1.50
16SFX-2-SS 16SFXO-SS 1.00 1.33 3.19 2.250 1.31 .94 1.906 1.530 .355 .469 219 7/16-14X1.75
20SFX-2-SS 20SFXO-SS 1.25 1.48 3.75 2.625 1.50 1.06 2.156 1.750 .385 .531 222 1/2-13X1.75
24SFX-2-SS 24SFXO-SS 1.50 1.83 4.44 3.125 1.69 1.19 2.531 2.030 .475 .656 225 5/8-11X2.25
32SFX-2-SS 32SFXO-SS 2.00 2.20 5.25 3.812 2.06 1.44 3.156 2.660 .475 .781 228 3/4-10X2.75
*Anchor part # includes: (1) split flange half only

**Kit part # includes: (2) split flange halves, (4) hex head bolts with lock washers, and (1) Viton O-Ring

A B C D E F G H J K
8SFW-SS 8SFTW-SS .50 1.81 2.12 .688 1.500 .75 .50 1.219 .955 .245 .344 5/16-18
12SFW-SS 12SFTW-SS .75 2.06 2.56 .875 1.875 .88 .56 1.531 1.265 .245 .406 3/8-16
16SFW-SS 16SFTW-SS 1.00 2.31 2.75 1.031 2.062 .94 .62 1.781 1.515 .295 .406 3/8-16
20SFW-SS 20SFTW-SS 1.25 2.88 3.12 1.188 2.312 .88 .56 2.031 1.720 .295 .469 7/16-14
24SFW-SS 24SFTW-SS 1.50 3.25 3.69 1.406 2.750 1.00 .62 2.406 2.000 .295 .531 1/2-13
32SFW-SS 32SFTW-SS 2.00 3.81 4.00 1.688 3.062 1.03 .62 2.844 2.470 .355 .531 1/2-13
40SFW-SS 40SFTW-SS 2.50 4.28 4.50 2.000 3.500 1.50 .75 3.344 2.950 .355 .531 1/2-13
48SFW-SS 48SFTW-SS 3.00 5.16 5.31 2.438 4.188 1.62 .88 4.031 3.580 .355 .656 5/8-11
56SFW-SS 56SFTW-SS 3.50 5.50 6.00 2.750 4.750 1.12 .88 4.531 4.030 .422 .656 5/8-11
64SFW-SS 64SFTW-SS 4.00 6.00 6.38 3.062 5.125 1.38 1.00 5.031 4.530 .422 .656 5/8-11

DRILLED TAPPED K
FLANGE SIZE A B C D E F G H J K
PART NO. PART NO. UNC-2B
8SFXW-SS 8SFXTW-SS .50 1.86 2.22 .718 1.594 .88 .62 1.281 .970 .285 .344 5/16-18
12SFXW-SS 12SFXTW-SS .75 2.38 2.81 .937 2.000 1.12 .75 1.656 1.280 .325 .406 3/8-16
16SFXW-SS 16SFXTW-SS 1.00 2.75 3.19 1.093 2.250 1.31 .94 1.906 1.530 .355 .469 7/16-14
20SFXW-SS 20SFXTW-SS 1.25 3.06 3.75 1.250 2.625 1.50 1.06 2.156 1.750 .385 .531 1/2-13
24SFXW-SS 24SFXTW-SS 1.50 3.75 4.44 1.437 3.125 1.69 1.19 2.531 2.030 .475 .656 5/8-11
32SFXW-SS 32SFXTW-SS 2.00 4.50 5.25 1.750 3.812 2.06 1.44 3.156 2.660 .475 .781 3/4-10
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
VALVES
INLINE
VALVES
BALL
CODE 61 JIC THREAD CODE 62 JIC THREAD
O.D. SIZE O.D. SIZE
300-8-8-SS 1/2 1/2 2.60 1.188 1.94 3/4-16 600-12-12-SS 3/4 3/4 2.75 1.625 1.89 1 1/16-12
300-12-12-SS 3/4 3/4 2.75 1.500 1.89 1 1/16-12 600-16-16-SS 1 1 2.80 1.875 1.89 1 5/16-12
300-16-16-SS 1 1 2.80 1.750 1.89 1 5/16-12 600-20-20-SS 1 1/4 1 1/4 3.05 2.125 2.09 1 5/8-12
300-20-20-SS 1 1/4 1 1/4 2.80 2.000 1.84 1 5/8-12 600-24-24-SS 1 1/2 1 1/2 3.50 2.500 2.42 1 7/8-12
COUPLINGS
300-24-24-SS 1 1/2 1 1/2 3.50 2.375 2.42 1 7/8-12
QUICK
COUPLINGS
WELD
AND RETURN
SUCTION
CODE 61 90 DEGREE JIC THREAD CODE 62 90 DEGREE JIC THREAD
O.D. SIZE O.D. SIZE
390-12-12-SS 3/4 3/4 1.500 1.66 2.13 1 1/16-12 690-12-12-SS 3/4 3/4 1.625 1.66 2.13 1 1/16-12
390-16-16-SS 1 1 1.750 1.81 2.37 1 5/16-12 690-16-16-SS 1 1 1.875 1.81 2.37 1 5/16-12
FLANGES
390-20-20-SS 1 1/4 1 1/4 2.000 2.06 2.62 1 5/8-12 690-20-20-SS 1 1/4 1 1/4 2.125 2.06 2.76 1 5/8-12
C/S
390-24-24-SS 1 1/2 1 1/2 2.375 2.33 3.15 1 7/8-12 690-24-24-SS 1 1/2 1 1/2 2.500 2.33 3.15 1 7/8-12

FLANGES
S/S
127
866-FLANGES | 513.527.4444 | Fax 513.527.4449
127
Blanking
Figure 1 Figure 2
FIG. 1 FIG. 2
CODE 61 BLANKING
PAD H HARDWARE
SIZE UNC-2B
FIG. 1 FIG. 2
O-RING SHCS
W36-8-8-SS W37-8-8-SS .50 1.50 2.12 .688 1.50 1.20 1.000 .344 5/16-18 210 5/16-18X2.00
W36-12-12-SS W37-12-12-SS .75 1.75 2.62 .875 1.875 1.20 1.250 .406 3/8-16 214 3/8-16X2.00
W36-16-16-SS W37-16-16-SS 1.00 2.00 2.82 1.031 2.063 1.45 1.560 .406 3/8-16 219 3/8-16X2.25
W36-20-20-SS W37-20-20-SS 1.25 2.50 3.19 1.188 2.313 1.45 1.750 .469 7/16-14 222 7/16-14X2.25
W36-24-24-SS W37-24-24-SS 1.50 2.75 3.75 1.406 2.750 1.70 2.115 .531 1/2-13 225 1/2-13X2.50
W36-32-32-SS W37-32-32-SS 2.00 3.25 4.00 1.688 3.063 1.70 2.490 .531 1/2-13 228 1/2-13X2.50
W36-40-40-SS W37-40-40-SS 2.50 4.00 4.50 2.000 3.500 1.95 2.995 .531 1/2-13 232 1/2-13X2.75
W36-48-48-SS W37-48-48-SS 3.00 4.50 5.31 2.438 4.188 2.20 3.615 .656 5/8-11 237 5/8-11X3.50
W36-56-56-SS W37-56-56-SS 3.50 5.00 6.00 2.750 4.750 1.45 4.095 .656 5/8-11 241 5/8-11X2.75
W36-64-64-SS W37-64-64-SS 4.00 5.50 6.38 3.062 5.125 1.45 4.595 .656 5/8-11 245 5/8-11X2.75
CODE 62 BLANKING
PAD H HARDWARE
SIZE UNC-2B
W38-8-8-SS W39-8-8-SS .50 1.75 2.22 .718 1.594 .94 1.000 .344 5/16-18 210 5/16-18X1.50
W38-12-12-SS W39-12-12-SS .75 2.00 2.81 .937 2.000 1.19 1.250 .406 3/8-16 214 3/8-16X2.00
W38-16-16-SS W39-16-16-SS 1.00 2.25 3.19 1.093 2.250 1.44 1.560 .492 7/16-14 219 7/16-14X2.25
W38-20-20-SS W39-20-20-SS 1.25 2.75 3.75 1.250 2.625 1.44 1.750 .531 1/2-13 222 1/2-13X2.50
W38-24-24-SS W39-24-24-SS 1.50 3.25 4.50 1.437 3.125 1.69 2.115 .656 5/8-11 225 5/8-11X2.75
W38-32-32-SS W39-32-32-SS 2.00 4.00 5.25 1.750 3.812 1.69 2.490 .781 3/4-10 228 3/4-10X3.00
W38-40-40-SS W39-40-40-SS 2.50 5.00 6.88 2.311 4.874 1.94 2.995 .906 7/8-9 232 7/8-9X3.75
W38-48-48-SS W39-48-48-SS 3.00 6.00 8.50 2.811 6.000 2.44 3.615 1.190 1 1/8-7 237 1 1/8-7X4.50
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
NPTF Thread
VALVES
INLINE
VALVES
BALL
Figure 1 Figure 2
COUPLINGS
CODE 61 NPTF THREAD
QUICK
PIPE PAD K HARDWARE
O-RING FLAT FACE A B C D E F G H J
SIZE SIZE UNC-2B
W43-8-8-SS W104-8-8-SS .50 .50 1.50 2.12 .688 1.500 1.20 1.000 .502 .50 .344 5/16-18 210 5-16-18X1.75
W43-12-12-SS W104-12-12-SS .75 .75 1.75 2.62 .875 1.875 1.20 1.250 .752 .75 .406 3/8-16 214 3/8-16X2.00
W43-16-16-SS W104-16-16-SS 1.00 1.00 2.00 2.82 1.031 2.062 1.45 1.560 1.002 1.00 .406 3/8-16 219 3/8-16X2.25
W43-20-20-SS W104-20-20-SS 1.25 1.25 2.50 3.19 1.188 2.312 1.45 1.750 1.252 1.25 .469 7/16-14 222 7/16-14X2.25
W43-24-24-SS W104-24-24-SS 1.50 1.50 2.75 3.75 1.406 2.750 1.70 2.115 1.502 1.50 .531 1/2-13 225 1/2-13X2.50
COUPLINGS
W43-32-32-SS W104-32-32-SS 2.00 2.00 3.25 4.00 1.688 3.062 1.70 2.490 2.002 2.00 .531 1/2-13 228 1/2-13X2.50
WELD
W43-40-40-SS W104-40-40-SS 2.50 2.50 4.00 4.50 2.000 3.500 1.95 2.995 2.502 2.50 .531 1/2-13 232 1/2-13X2.75
W43-48-48-SS W104-48-48-SS 3.00 3.00 4.50 5.31 2.438 4.188 2.20 3.615 3.002 3.00 .656 5/8-11 237 5/8-11X3.00
CODE 62 NPTF THREAD

PIPE PAD K HARDWARE
SIZE SIZE UNC-2B
AND RETURN
W44-8-8-SS W45-8-8-SS .50 .50 1.75 2.22 .718 1.594 .95 1.000 .502 .50 .344 5/16-18 210 5/16-18X1.50
SUCTION
W44-12-12-SS W45-12-12-SS .75 .75 2.00 2.81 .937 2.000 1.20 1.250 .752 .75 .406 3/8-16 214 3/8-16X2.00
W44-16-16-SS W45-16-16-SS 1.00 1.00 2.25 3.19 1.093 2.250 1.45 1.560 1.002 1.00 .492 7/16-14 219 7/16-14X2.50
W44-20-20-SS W45-20-20-SS 1.25 1.25 2.75 3.75 1.250 2.625 1.45 1.750 1.252 1.25 .531 1/2-13 222 1/2-13X2.25
W44-24-24-SS W45-24-24-SS 1.50 1.50 3.25 4.50 1.437 3.125 1.70 2.115 1.502 1.50 .656 5/8-11 225 5/8-11X2.75
W44-32-32-SS W45-32-32-SS 2.00 2.00 4.00 5.25 1.750 3.812 1.70 2.490 2.002 2.00 .781 3/4-10 228 3/4-10X3.00
Mounting kit available on o-ring grooved flanges by simply adding suffix letter ‘U’ to part number. FLANGES
C/S
FLANGES
S/S
129
866-FLANGES | 513.527.4444 | Fax 513.527.4449
129
SAE Thread
Figure 1 Figure 2
FIG. 1 FIG. 2
*No Counterbore

TUBE PAD K HARDWARE
SIZE SIZE UNC-2B
W46-8-8-SS W106-8-8-SS .50 .50 1.50 2.12 .688 1.500 1.20 1.000 .502 3/4-16 .344 5/16-18 210 5-16-18X1.25
W46-12-12-SS W106-12-12-SS .75 .75 1.75 2.62 .875 1.875 1.20 1.250 .752 1 1/16-12 .406 3/8-16 214 3/8-16X1.50
W46-16-16-SS W106-16-16-SS 1.00 1.00 2.00 2.82 1.031 2.062 1.45 1.560 1.002 1 5/16-12 .406 3/8-16 219 3/8-16X1.50
W46-20-20-SS W106-20-20-SS 1.25 1.25 2.50 3.19 1.188 2.312 1.45 1.750 1.252 1 5/8-12 .469 7/16-14 222 7/16-14X1.75
W46-24-24-SS W106-24-24-SS 1.50 1.50 2.75 3.75 1.406 2.750 1.70 2.115 1.502 1 7/8-12 .531 1/2-13 225 1/2-13X2.00
*W46-32-32-SS W106-32-32-SS 2.00 2.00 3.25 4.00 1.688 3.062 1.70 2.490 2.002 2 1/2-12 .531 1/2-13 228 1/2-13X2.00
**W46-40-40-SS W106-40-40-SS 2.50 2.50 4.00 4.50 2.00 3.50 1.95 3.000 2.500 3-12 .530 1/2-13 232 1/2-13X2.25
**W46-48-48-SS W106-48-48-SS 3.00 3.00 4.50 5.31 2.44 4.19 2.20 3.62 3.000 3 1/2-12 .660 5/8-11 237 5/8-11X2.25
**W46-64-64-SS W106-64-64-SS 4.00 4.00 5.50 6.38 3.06 5.13 1.45 4.60 4.000 4 1/2-12 .660 5/8-11 245 5/8-11X1.50
*1000 PSI max for W46-32-32-SS

**Consult Factory For Working Pressure

TUBE PAD K HARDWARE
SIZE SIZE UNC-2B
W48-8-8-SS W49-8-8-SS .50 .50 1.75 2.22 .718 1.594 .95 1.000 .502 3/4-16 .344 5/16-18 210 5/16-18X1.25
W48-12-12-SS W49-12-12-SS .75 .75 2.00 2.81 .937 2.000 1.20 1.250 .752 1 1/16-12 .406 3/8-16 214 3/8-16X1.50
W48-16-16-SS W49-16-16-SS 1.00 1.00 2.25 3.19 1.093 2.250 1.45 1.560 1.002 1 5/16-12 .492 7/16-14 219 7/16-14X1.75
W48-20-20-SS W49-20-20-SS 1.25 1.25 2.75 3.75 1.250 2.625 1.45 1.750 1.252 1 5/8-12 .531 1/2-13 222 1/2-13X1.50
W48-24-24-SS W49-24-24-SS 1.50 1.50 3.25 4.50 1.437 3.125 1.70 2.115 1.502 1 7/8-12 .656 5/8-11 225 5/8-11X2.00
W48-32-32-SS W49-32-32-SS 2.00 2.00 4.00 5.25 1.750 3.812 1.70 2.490 2.002 2 1/2-12 .781 3/4-10 228 3/4-10X2.00
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Flat Socket Weld Pipe
VALVES
INLINE
VALVES
BALL
Figure 1 Figure 2

PIPE PAD L
COUPLINGS
O-RING FLAT FACE A B C D E F G H J K HARDWARE
SIZE SIZE UNC-2B
QUICK
W4-8-8-SS W61-8-8-SS .50 .50 1.50 2.12 .688 1.500 .69 .38 1.000 .502 .860 .344 5/16-18 210 5/16-18X1.25
W4-12-12-SS W61-12-12-SS .75 .75 1.75 2.62 .875 1.875 .94 .50 1.250 .752 1.070 .406 3/8-16 214 3/8-16X1.75
W4-16-16-SS W61-16-16-SS 1.00 1.00 2.00 2.82 1.031 2.062 .94 .50 1.560 1.002 1.335 .406 3/8-16 219 3/8-16X1.75
W4-20-20-SS W61-20-20-SS 1.25 1.25 2.50 3.19 1.188 2.312 .94 .50 1.750 1.252 1.680 .469 7/16-14 222 7/16-14X1.75
W4-24-24-SS W61-24-24-SS 1.50 1.50 2.75 3.75 1.406 2.750 1.19 .50 2.115 1.502 1.920 .531 1/2-13 225 1/2-13X2.25
W4-32-32-SS W61-32-32-SS 2.00 2.00 3.25 4.00 1.688 3.062 1.44 .62 2.490 2.002 2.411 .531 1/2-13 228 1/2-13X2.50
W4-40-40-SS W61-40-40-SS 2.50 2.50 4.00 4.50 2.000 3.500 1.69 .75 2.995 2.502 2.911 .531 1/2-13 232 1/2-13X2.75
W4-48-48-SS W61-48-48-SS 3.00 3.00 4.50 5.31 2.438 4.188 2.12 1.24 3.615 3.002 3.540 .656 5/8-11 237 5/8-11X3.50
COUPLINGS
WELD
PIPE PAD L HARDWARE
SIZE SIZE UNC-2B
W59-8-8-SS W60-8-8-SS .50 .50 1.75 2.22 .718 1.594 .940 .50 1.000 .502 .860 .344 5/16-18 210 5/16-18X1.50
W59-12-12-SS W60-12-12-SS .75 .75 2.00 2.81 .937 2.000 .940 .50 1.250 .752 1.070 .406 3/8-16 214 3/8-16X1.75
W59-16-16-SS W60-16-16-SS 1.00 1.00 2.25 3.19 1.093 2.250 .940 .50 1.560 1.002 1.335 .492 7/16-14 219 7/16-14X1.75
AND RETURN
W59-20-20-SS W60-20-20-SS 1.25 1.25 2.75 3.75 1.250 2.625 1.19 .50 1.750 1.252 1.672 .531 1/2-13 222 1/2-13X2.25
SUCTION
W59-24-24-SS W60-24-24-SS 1.50 1.50 3.25 4.50 1.437 3.125 1.44 .50 2.115 1.502 1.920 .656 5/8-11 225 5/8-11X2.75
W59-32-32-SS W60-32-32-SS 2.00 2.00 4.00 5.25 1.750 3.812 1.69 .62 2.490 2.002 2.411 .781 3/4-10 228 3/4-10X3.00
W59-40-40-SS W60-40-40-SS 2.50 2.50 5.00 6.88 2.311 4.874 1.94 .62 2.995 2.502 2.911 .906 7/8-9 232 7/8-9X3.50
W59-48-48-SS W60-48-48-SS 3.00 3.00 6.00 8.50 2.811 6.000 2.44 .62 3.615 3.002 3.540 1.190 1-1/8-7 237 1-1/8-7X4.50
CODE 61 FLAT SOCKET WELD - PIPE - ALL SIZES 500 PSI

MOUNTING
FLANGES
PART NO. PART NO.

PIPE PAD L HARDWARE
SIZE SIZE UNC-2B
C/S

W72-48-48-SS W91-48-48-SS 3.00 3.00 4.50 5.31 2.438 4.188 1.38 1.13 3.615 3.002 3.540 .656 5/8-11 237 5/8-11X2.50
W72-56-56-SS W91-56-56-SS 3.50 3.50 5.00 6.00 2.750 4.750 1.44 1.19 4.095 3.502 4.054 .656 5/8-11 241 5/8-11X2.50
W72-64-64-SS W91-64-64-SS 4.00 4.00 5.50 6.38 3.062 5.125 1.450 1.20 4.595 4.002 4.550 .656 5/8-11 245 5/8-11X2.50
FLANGES
S/S
131
866-FLANGES | 513.527.4444 | Fax 513.527.4449
131
Deep Socket Weld Pipe
Figure 1 Figure 2
FIG. 1 FIG. 2

PIPE PAD M HARDWARE
SIZE SIZE UNC-2B
FIG. 1 FIG. 2
O-RING SHCS
W31-8-8-SS W3-8-8-SS .50 .50 1.81 2.13 .688 1.500 1.42 .63 1.000 .502 .855 .75 .344 5/16-18 210 5/16-18X1.25
W31-12-12-SS W3-12-12-SS .75 .75 1.97 2.56 .875 1.875 1.42 .71 1.250 .752 1.062 .75 .406 3/8-16 214 3/8-16X1.50
W31-16-16-SS W3-16-16-SS 1.00 1.00 2.17 2.75 1.031 2.062 1.50 .71 1.560 1.002 1.328 .75 .406 3/8-16 219 3/8-16X1.50
W31-20-20-SS W3-20-20-SS 1.25 1.25 2.68 3.12 1.188 2.312 1.61 .83 1.750 1.252 1.672 .87 .469 7/16-14 222 7/16-14X1.75
W31-24-24-SS W3-24-24-SS 1.50 1.50 3.07 3.66 1.406 2.750 1.77 .98 2.115 1.502 1.922 .94 .531 1/2-13 225 1/2-13X1.75
W31-32-32-SS W3-32-32-SS 2.00 2.00 3.54 4.00 1.688 3.062 1.77 .98 2.490 2.002 2.406 1.02 .531 1/2-13 228 1/2-13X1.75
W31-40-40-SS W3-40-40-SS 2.50 2.50 4.09 4.49 2.000 3.500 1.97 .98 2.995 2.502 2.908 1.18 .531 1/2-13 232 1/2-13X1.75
W31-48-48-SS W3-48-48-SS 3.00 3.00 4.88 5.28 2.438 4.188 1.97 1.06 3.615 3.002 3.547 1.34 .656 5/8-11 237 5/8-11X2.00

PIPE PAD M HARDWARE
SIZE SIZE UNC-2B
FIG. 1 FIG. 2
O-RING SHCS
W81-8-8-SS W80-8-8-SS .50 .50 1.81 2.21 .718 1.594 1.42 .63 1.000 .502 .855 .75 .344 5/16-18 210 5/16-18X1.25
W81-12-12-SS W80-12-12-SS .75 .75 2.17 2.80 .937 2.000 1.38 .83 1.250 .752 1.062 .87 .406 3/8-16 214 3/8-16X1.50
W81-16-16-SS W80-16-16-SS 1.00 1.00 2.56 3.19 1.093 2.250 1.65 .98 1.560 1.002 1.328 .87 .492 7/16-14 219 7/16-14X1.75
W81-20-20-SS W80-20-20-SS 1.25 1.25 3.07 3.75 1.250 2.625 1.77 1.06 1.750 1.252 1.672 .98 .531 1/2-13 222 1/2-13X1.75
W81-24-24-SS W80-24-24-SS 1.50 1.50 3.70 4.41 1.437 3.125 1.97 1.18 2.115 1.502 1.922 1.10 .656 5/8-11 225 5/8-11X2.25
W81-32-32-SS W80-32-32-SS 2.00 2.00 4.50 5.28 1.750 3.812 2.56 1.46 2.490 2.002 2.406 .94 .781 3/4-10 228 3/4-10X2.75
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Butt Weld Pipe
VALVES
INLINE
VALVES
L M
BALL
Figure 1 Figure 2

MOUNTING
PART NO. PART NO.
PIPE PAD M HARDWARE
SIZE SIZE UNC-2B
W35-8-SS W34-8-SS .50 .50 1.47 2.09 .688 1.500 1.06 .50 1.000 .548 .840 .624 .344 5/16-18 210 5/16-18X1.25
W35-12-SS W34-12-SS .75 .75 1.69 2.56 .875 1.875 1.06 .50 1.250 .744 1.050 .826 .406 3/8-16 214 3/8-16X1.25
COUPLINGS
W35-16-SS W34-16-SS 1.00 1.00 1.94 2.75 1.031 2.062 1.25 .56 1.560 .959 1.315 1.051 .406 3/8-16 219 3/8-16X1.25
QUICK
W35-20-SS W34-20-SS 1.25 1.25 2.19 3.12 1.188 2.312 1.44 .62 1.750 1.280 1.660 1.382 .469 7/16-14 222 7/16-14X1.50
W35-24-SS W34-24-SS 1.50 1.50 2.56 3.69 1.406 2.750 1.75 .81 2.115 1.502 1.900 1.612 .531 1/2-13 225 1/2-13X1.75
W35-32-SS W34-32-SS 2.00 2.00 3.06 4.00 1.688 3.062 2.00 1.06 2.490 1.941 2.375 2.069 .531 1/2-13 228 1/2-13X2.00
W35-40-SS W34-40-SS 2.50 2.50 3.56 4.50 2.000 3.500 2.31 1.12 2.995 2.325 2.875 2.471 .531 1/2-13 232 1/2-13X2.00
W35-48-SS W34-48-SS 3.00 3.00 4.19 5.31 2.438 4.188 2.75 1.62 3.615 2.902 3.500 3.070 .656 5/8-11 237 5/8-11X2.75
W35-56-SS W34-56-SS 3.50 3.50 5.00 6.00 2.750 4.750 1.50 1.00 4.095 3.366 4.000 3.550 .656 5/8-11 241 5/8-11X2.00
W35-64-SS W34-64-SS 4.00 4.00 5.50 6.38 3.062 5.125 1.50 1.00 4.595 3.828 4.500 4.028 .656 5/8-11 245 5/8-11X2.00
W35-80-SS W34-80-SS 5.00 5.00 7.00 7.25 3.625 6.000 2.00 1.25 5.595 4.81 5.62 5.078 .660 5/8-11 253 5/8-11X2.50
COUPLINGS
WELD
PIPE PAD M HARDWARE
SIZE SIZE UNC-2B
W24-8-SS W23-8-SS .50 .50 1.50 2.12 .688 1.500 1.06 .50 1.000 .546 .840 .344 5/16-18 210 5/16-18X1.25
W24-12-SS W23-12-SS .75 .75 1.69 2.56 .875 1.875 1.06 .50 1.250 .752 1.050 .406 3/8-16 214 3/8-16X1.25
W24-16-SS W23-16-SS 1.00 1.00 1.94 2.75 1.031 2.062 1.25 .56 1.560 .959 1.315 .406 3/8-16 219 3/8-16X1.25
SCHEDULE 40
W24-20-SS W23-20-SS 1.25 1.25 2.19 3.12 1.188 2.312 1.44 .62 1.750 1.280 1.660 .469 7/16-14 222 7/16-14X1.50
ONLY
AND RETURN
W24-24-SS W23-24-SS 1.50 1.50 2.56 3.69 1.406 2.750 1.75 .81 2.115 1.502 1.900 .531 1/2-13 225 1/2-13X1.75
SUCTION
W24-32-SS W23-32-SS 2.00 2.00 3.06 4.00 1.688 3.062 2.00 1.06 2.490 1.941 2.375 .531 1/2-13 228 1/2-13X2.00
W24-40-SS W23-40-SS 2.50 2.50 3.56 4.50 2.000 3.500 2.31 1.12 2.995 2.325 2.875 .531 1/2-13 232 1/2-13X2.00
W24-48-SS W23-48-SS 3.00 3.00 4.19 5.31 2.438 4.188 2.75 1.62 3.615 2.902 3.500 .656 5/8-11 237 5/8-11X2.75

PIPE PAD M HARDWARE
SIZE SIZE UNC-2B
W27-8-SS W25-8-SS .50 .50 1.50 2.12 .688 1.500 1.06 .50 1.000 .466 .840 .344 5/16-18 210 5/16-18X1.25
FLANGES
W27-12-SS W25-12-SS .75 .75 1.69 2.56 .875 1.875 1.06 .50 1.250 .616 1.050 .406 3/8-16 214 3/8-16X1.25
C/S
W27-16-SS W25-16-SS 1.00 1.00 1.94 2.75 1.031 2.062 1.25 .56 1.560 .817 1.315 .406 3/8-16 219 3/8-16X1.25
SCHEDULE 40
W27-20-SS W25-20-SS 1.25 1.25 2.19 3.12 1.188 2.312 1.44 .62 1.750 1.162 1.660 .469 7/16-14 222 7/16-14X1.50
ONLY
W27-24-SS W25-24-SS 1.50 1.50 2.56 3.69 1.406 2.750 1.75 .81 2.115 1.339 1.900 .531 1/2-13 225 1/2-13X1.75
W27-32-SS W25-32-SS 2.00 2.00 3.06 4.00 1.688 3.062 2.00 1.06 2.490 1.691 2.375 .531 1/2-13 228 1/2-13X2.00
W27-40-SS W25-40-SS 2.50 2.50 3.56 4.50 2.000 3.500 2.31 1.12 2.995 2.127 2.875 .531 1/2-13 232 1/2-13X2.00
W27-48-SS W25-48-SS 3.00 3.00 4.19 5.31 2.438 4.188 2.75 1.62 3.615 2.626 3.500 .656 5/8-11 237 5/8-11X2.75
FLANGES
S/S
133
866-FLANGES | 513.527.4444 | Fax 513.527.4449
133
Butt Weld Pipe
Figure 1 LK LM Figure 2
FIG. 1 FIG. 2

PIPE PAD L HARDWARE
SIZE SIZE UNC-2B
W28-8-SS W26-8-SS .50 .50 1.75 2.22 .718 1.594 1.25 .776 1.000 .548 .840 .344 5/16-18 210 5/16-18X1.50
W28-12-SS W26-12-SS .75 .75 1.94 2.81 .937 2.000 1.42 .83 1.250 .744 1.050 .406 3/8-16 214 3/8-16X1.50
W28-16-SS W26-16-SS 1.00 1.00 2.18 3.19 1.093 2.250 1.61 .83 1.560 .959 1.315 .492 7/16-14 219 7/16-14X1.50
W28-20-SS W26-20-SS 1.25 1.25 2.44 3.75 1.250 2.625 1.73 .94 1.750 1.280 1.660 .531 1/2-13 222 1/2-13X2.00
W28-24-SS W26-24-SS 1.50 1.50 2.81 4.44 1.437 3.125 2.17 1.10 2.115 1.502 1.900 .656 5/8-11 225 5/8-11X2.25
W28-32-SS W26-32-SS 2.00 2.00 3.44 5.25 1.750 3.812 2.48 1.46 2.490 1.941 2.375 .781 3/4-10 228 3/4-10X3.00
W28-40-SS W26-40-SS 2.50 2.50 5.00 6.88 2.311 4.874 2.37 1.50 2.995 2.325 2.875 .940 7/8-9 232 7/8-9X3.00
W28-48-SS W26-48-SS 3.00 3.00 6.00 8.50 2.811 6.000 2.96 2.00 3.615 2.902 3.500 1.190 1-1/8-7 237 1-1/8-7X4.00

PIPE PAD L HARDWARE
SIZE SIZE UNC-2B
W30-12-SS W29-12-SS .75 .75 1.94 2.81 .937 2.000 1.42 .83 1.250 .616 1.050 .406 3/8-16 214 3/8-16X1.50
W30-16-SS W29-16-SS 1.00 1.00 2.18 3.19 1.093 2.250 1.61 .83 1.560 .817 1.315 .492 7/16-14 219 7/16-14X1.50
W30-20-SS W29-20-SS 1.25 1.25 2.44 3.75 1.250 2.625 1.73 .94 1.750 1.162 1.660 .531 1/2-13 222 1/2-13X2.00
W30-24-SS W29-24-SS 1.50 1.50 2.81 4.44 1.437 3.125 2.17 1.10 2.115 1.339 1.900 .656 5/8-11 225 5/8-11X2.25
W30-32-SS W29-32-SS 2.00 2.00 3.44 5.25 1.750 3.812 2.48 1.46 2.490 1.691 2.375 .781 3/4-10 228 3/4-10X3.00
W30-40-SS W29-40-SS 2.50 2.50 5.00 6.88 2.311 4.874 2.37 1.50 2.995 2.127 2.875 .940 7/8-9 232 7/8-9X3.00
W30-48-SS W29-48-SS 3.00 3.00 6.00 8.50 2.811 6.000 2.96 2.00 3.615 2.626 3.500 1.190 1-1/8-7 237 1-1/8-7X4.00
CODE 62 BUTT WELD - SCHEDULE XXS PIPE

PIPE PAD L HARDWARE
SIZE SIZE UNC-2B
W33-12-SS W32-12-SS .75 .75 1.94 2.81 .937 2.000 1.42 .83 1.250 .436 1.050 .406 3/8-16 214 3/8-16X1.50
W33-16-SS W32-16-SS 1.00 1.00 2.18 3.19 1.093 2.250 1.61 .83 1.560 .601 1.315 .492 7/16-14 219 7/16-14X1.50
W33-20-SS W32-20-SS 1.25 1.25 2.44 3.75 1.250 2.625 1.73 .94 1.750 .898 1.660 .531 1/2-13 222 1/2-13X2.00
W33-24-SS W32-24-SS 1.50 1.50 2.81 4.44 1.437 3.125 2.17 1.10 2.115 1.102 1.900 .656 5/8-11 225 5/8-11X2.25
W33-32-SS W32-32-SS 2.00 2.00 3.44 5.25 1.750 3.812 2.48 1.46 2.490 1.505 2.375 .781 3/4-10 228 3/4-10X3.00
W33-40-SS W32-40-SS 2.50 2.50 5.00 6.88 2.311 4.874 2.37 1.50 2.995 1.773 2.875 .940 7/8-9 232 7/8-9X3.00
W33-48-SS W32-48-SS 3.00 3.00 6.00 8.50 2.811 6.000 2.96 2.00 3.615 2.302 3.500 1.190 1-1/8-7 237 1-1/8-7X4.00
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Socket Weld Pipe Elbow
VALVES
INLINE
FIG. 1
VALVES
BALL
FIG. 1
FIG. 2
COUPLINGS
QUICK
FIG. 1 ONLY FIG. 2

PIPE PAD M HARDWARE
COUPLINGS
SIZE SIZE UNC-2B
WELD
W176-8-8-SS W169-8-8-SS .50 .50 2.12 1.75 1.500 .688 .75 1.44 .855 .380 1.000 .50 .344 5/16-18 210 5/16-18X2.00
W176-12-12-SS W169-12-12-SS .75 .75 2.62 2.00 1.875 .875 .88 1.70 1.062 .500 1.250 .75 .406 3/8-16 214 3/8-16X2.50
W176-16-16-SS W169-16-16-SS 1.00 1.00 2.82 2.25 2.062 1.031 1.00 1.94 1.328 .500 1.560 1.00 .406 3/8-16 219 3/8-16X2.75
W176-20-20-SS W169-20-20-SS 1.25 1.25 3.19 2.75 2.312 1.188 1.25 2.40 1.672 .500 1.750 1.25 .469 7/16-14 222 7/16-14X3.00
W176-24-24-SS W169-24-24-SS 1.50 1.50 3.75 3.00 2.750 1.406 1.38 2.90 1.922 .500 2.115 1.50 .531 1/2-13 225 1/2-13X4.00
W176-32-32-SS W169-32-32-SS 2.00 2.00 4.00 3.50 3.062 1.688 1.62 3.40 2.406 .500 2.490 2.00 .531 1/2-13 228 1/2-13X4.50
W176-40-40-SS W169-40-40-SS 2.50 2.50 4.50 4.00 3.500 2.000 2.00 3.96 2.906 .500 2.995 2.50 .531 1/2-13 232 1/2-13X5.00
AND RETURN
W176-48-48-SS W169-48-48-SS 3.00 3.00 5.31 5.00 4.188 2.438 2.25 4.96 3.547 .625 3.615 3.00 .656 5/8-11 237 5/8-11X6.00
SUCTION
PIPE PAD M HARDWARE
SIZE SIZE UNC-2B
W186-8-8-SS W189-8-8-SS .50 .50 2.22 2.00 1.594 .718 .88 1.46 .860 .380 1.000 .50 .344 5/16-18 210 5/16-18X2.25
W186-12-12-SS W189-12-12-SS .75 .75 2.81 2.25 2.000 .937 1.00 1.70 1.062 .500 1.250 .75 .406 3/8-16 214 3/8-16X2.50
FLANGES
W186-16-16-SS W189-16-16-SS 1.00 1.00 3.19 2.50 2.250 1.093 1.12 2.21 1.328 .500 1.560 1.00 .492 7/16-14 219 7/16-14X3.25
C/S
W186-20-20-SS W189-20-20-SS 1.25 1.25 3.75 3.00 2.625 1.250 1.38 2.44 1.672 .500 1.750 1.25 .531 1/2-13 222 1/2-13X3.25
W186-24-24-SS W189-24-24-SS 1.50 1.50 4.50 3.50 3.125 1.437 1.62 2.96 1.922 .500 2.115 1.50 .656 5/8-11 225 5/8-11X4.00
W186-32-32-SS W189-32-32-SS 2.00 2.00 5.25 4.00 3.812 1.750 2.00 3.46 2.406 .500 2.490 2.00 .781 3/4-10 228 3/4-10X5.00
FLANGES
S/S
135
866-FLANGES | 513.527.4444 | Fax 513.527.4449
135
Elbow Block
FIG. 1
FIG. 1 & 2
FIG. 1
FIG. 2
FIG. 1 ONLY FIG. 2
CODE 61 ELBOW BLOCK

PAD I
SIZE UNC-2B
W14-12-SS W15-12-SS .75 2.62 2.50 1.875 .875 2.25 .75 1.250 .406 3/8-16 1.03 1.03 214 3/8-16X3.00
W14-16-SS W15-16-SS 1.00 2.82 2.50 2.062 1.031 2.50 1.00 1.560 .406 3/8-16 1.16 1.09 219 3/8-16X3.25
W14-20-SS W15-20-SS 1.25 3.19 3.00 2.312 1.188 3.00 1.25 1.750 .469 7/16-14 1.44 1.31 222 7/16-14X4.00
W14-24-SS W15-24-SS 1.50 3.75 3.50 2.750 1.406 3.50 1.50 2.115 .531 1/2-13 1.62 1.62 225 1/2-13X4.50
W14-32-SS W15-32-SS 2.00 4.00 4.00 3.062 1.688 4.00 2.00 2.490 .531 1/2-13 1.91 1.91 228 1/2-13X5.00
CODE 62 ELBOW BLOCK

PAD I
SIZE UNC-2B
W12-12-SS W13-12-SS .75 2.82 2.50 2.000 .937 2.50 .750 1.250 .406 3/8-16 1.19 1.06 214 3/8-16X3.50
W12-16-SS W13-16-SS 1.00 3.19 3.00 2.250 1.093 3.00 1.00 1.560 .469 7/16-14 1.38 1.38 219 7/16-14X4.00
W12-20-SS W13-20-SS 1.25 3.75 3.50 2.625 1.250 3.50 1.25 1.750 .531 1/2-13 1.62 1.41 222 1/2-13X4.50
W12-24-SS W13-24-SS 1.50 4.50 4.00 3.125 1.437 4.00 1.50 2.115 .656 5/8-11 1.88 1.75 225 5/8-11X5.00
W12-32-SS W13-32-SS 2.00 5.25 5.00 3.812 1.75 5.00 2.00 2.490 .781 3/4-10 2.25 2.50 228 3/4-10X6.00
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
Tee Junction Block
VALVES
INLINE
VALVES
BALL
FIG. 1
COUPLINGS
QUICK
FIG. 1
FIG. 2
COUPLINGS
WELD
FIG. 1 ONLY FIG. 2

PAD L
SIZE UNC-2B
AND RETURN
W17-12-SS W16-12-SS .75 2.62 2.75 1.875 .875 2.25 1.22 1.250 .75 .406 3/8-16 214 3/8-16X3.00
SUCTION
W17-16-SS W16-16-SS 1.00 2.82 3.00 2.062 1.031 2.50 1.34 1.560 1.00 .406 3/8-16 219 3/8-16X3.25
W17-20-SS W16-20-SS 1.25 3.19 3.50 2.312 1.188 3.00 1.56 1.750 1.25 .492 7/16-14 222 7/16-14X4.00
W17-24-SS W16-24-SS 1.50 3.75 4.00 2.750 1.406 3.50 1.88 2.115 1.50 .531 1/2-13 225 1/2-13X4.50
W17-32-SS W16-32-SS 2.00 4.00 4.25 3.062 1.688 4.00 2.09 2.490 2.00 .531 1/2-13 228 1/2-13X5.00

PAD L
SIZE UNC-2B
FLANGES

W19-12-SS W18-12-SS .75 2.81 3.00 2.000 .937 1.50 2.50 1.310 1.250 .750 .406 3/8-16 214 3/8-16X3.25
C/S
W19-16-SS W18-16-SS 1.00 3.19 3.50 2.250 1.093 1.75 3.00 1.620 1.560 1.000 .492 7/16-14 219 7/16-14X4.00
W19-20-SS W18-20-SS 1.25 3.75 4.00 2.625 1.250 2.00 3.50 1.880 1.750 1.250 .531 1/2-13 222 1/2-13X4.50
W19-24-SS W18-24-SS 1.50 4.50 4.50 3.125 1.437 2.25 4.00 2.120 2.115 1.500 .656 5/8-11 225 5/8-11X5.00
W19-32-SS W18-32-SS 2.00 5.25 5.00 3.812 1.750 2.50 5.00 2.750 2.490 2.00 .781 3/4-10 228 3/4-10X6.00
FLANGES
S/S
137
866-FLANGES | 513.527.4444 | Fax 513.527.4449
137
FIG. 1 FIG. 2
FIG. 1 FIG. 2
3000 SERIES SQUARE NPTF THREAD

PIPE H HARDWARE
SIZE UNC-2B
W65-12-SS W75-12-SS .75 2.25 1.438 1.25 1.375 .752 .75 .406 3/8-16 216 3/8-16X2.00
W65-16-SS W75-16-SS 1.00 3.00 2.000 1.50 1.750 1.002 1.00 .531 1/2-13 222 1/2-13X2.25
W65-20-SS W75-20-SS 1.25 3.00 2.000 1.50 1.750 1.252 1.25 .531 1/2-13 222 1/2-13X2.25
W65-24-SS W75-24-SS 1.50 4.00 2.750 1.75 2.500 1.502 1.50 .656 5/8-11 228 5/8-11X2.75
W65-32-SS W75-32-SS 2.00 4.00 2.750 1.75 2.500 2.002 2.00 .656 5/8-11 228 5/8-11X2.75
W65-40-SS W75-40-SS 2.50 5.50 3.750 2.25 3.500 2.502 2.50 .906 7/8-9 236 7/8-9X3.50
W65-48-SS W75-48-SS 3.00 5.50 3.750 2.25 3.500 3.002 3.00 .906 7/8-9 236 7/8-9X3.50
FIG. 1 FIG. 2
FIG. 1 FIG. 2

PIPE J HARDWARE
SIZE UNC-2B
W66-12-SS W76-12-SS .75 2.25 1.438 1.00 .50 1.375 .752 1.062 .406 3/8-16 216 3/8-16X1.75
W66-16-SS W76-16-SS 1.00 3.00 2.000 1.00 .50 1.750 1.002 1.328 .531 1/2-13 222 1/2-13X1.75
W66-20-SS W76-20-SS 1.25 3.00 2.000 1.00 .50 1.750 1.252 1.672 .531 1/2-13 222 1/2-13X1.75
W66-24-SS W76-24-SS 1.50 4.00 2.750 1.25 .62 2.500 1.502 1.922 .656 5/8-11 228 5/8-11X2.25
W66-32-SS W76-32-SS 2.00 4.00 2.750 1.25 .62 2.500 2.002 2.406 .656 5/8-11 228 5/8-11X2.25
W66-40-SS W76-40-SS 2.50 5.50 3.750 1.50 .75 3.500 2.502 2.906 .906 7/8-9 236 7/8-9X2.75
W66-48-SS W76-48-SS 3.00 5.50 3.750 1.50 .75 3.500 3.002 3.547 .906 7/8-9 236 7/8-9X2.75
W66-64-SS W76-64-SS 4.00 7.00 5.000 2.00 .75 4.625 3.880 4.550 1.060 1-8 347 1-8X4.00
866-FLANGES | 513.527.4444 | Fax 513.527.4449

TEST POINT
ADAPTERS
SAE J518 O-Ring Assortment Kit
Anchor Fluid Power now offers the most

commonly sized o-rings for SAE J518
VALVES
INLINE
flange connections in one complete kit.
This assortment of 90 durometer o-rings
is available in Buna or Viton material
and comes conveniently packaged in its
own rigid case. Request part numbers
SAEJ518KIT-B (Buna) and SAEJ518KIT-V
(Viton) when inquiring.
VALVES
BALL
O-Ring Sizing & Kit Information:
All measurements are in inches.
COUPLINGS
QUICK
90 DUROMETER
QTY O-RING SIZE - SIZE A B
20 210 0.50 8 0.75 0.139
20 214 0.75 12 1.00 0.139
20 219 1.00 16 1.31 0.139
20 222 1.25 20 1.50 0.139
20 225 1.50 24 1.88 0.139
20 228 2.00 32 2.25 0.139
COUPLINGS
20 232 2.50 40 2.75 0.139
WELD
20 237 3.00 48 3.38 0.139
5 241 3.50 56 3.88 0.139
5 245 4.00 64 4.38 0.139
AND RETURN
SUCTION
LIMITED WARRANTY
Anchor warrants only that the Products conform to the dimensions set forth in its catalog at the time of sale. Catalog dimensions are subject to change. Anchor does not warrant
products manufactured by manufacturers other than Anchor against defects in material or workmanship, though such products may be subject to warranties provided by those
manufacturers. This warranty excludes damage and deterioration resulting from normal wear and tear and/or any misuse of the Product. This warranty is made in lieu of all other
warranties, expressed or implied. All other warranties, expressed or implied, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING
FROM A COURSE OF DEALING OR TRADE, are excluded and will not apply to the Products sold. If Buyer disassembles or modifies Products in any way, warranty is void. Buyer must
obtain written authorization from Anchor prior to returning Products. Nonconforming Products for which a return has been authorized by Anchor in accordance with Paragraph
12 (Returns) hereof must be returned to Anchor within 30 days of delivery to Buyer. Internal material defects may not be commercially detectable. Under no circumstances will
Anchor be liable for any damages or claims with respect to soundness of material. No employee, agent, or representative of Anchor has the authority to orally vary the terms of the
warranty described herein. This warranty does not apply to purchasers other than Anchor’s direct customers.
FLANGES
LIMITATION OF DAMAGES
Buyer’s sole and exclusive remedy against Anchor for nonconforming Products will be the furnishing of replacement Products (F.O.B. Anchor) or a credit for such Products, as
C/S
determined by Anchor in its sole discretion; provided that the return of nonconforming Products shall be subject to the provisions of Paragraph 12 (Returns) hereof. Anchor shall not
be liable to Buyer, its employees, agents, customers or to any third party for any claim, loss or damage, general or specific, incidental or consequential, including but not limited to
death, personal injury, property damage, lost sales or lost profit, which in any way arises out of or in connection with the sale of any Product, or the use or nonuse of such Products,
regardless of whether such loss or damage was foreseeable and whether or not Anchor has been advised of the possibility of such loss or damage.
RETURNS
No Products may be returned to Anchor without Anchor’s prior written consent. Authorized returns will be subject to a minimum restocking charge equal to 25% of Anchor’s invoice
price. No cash refunds will be offered by Anchor. A credit for properly returned Products will be issued to your account for future purchases from Anchor only.
FLANGES
S/S
139
866-FLANGES | 513.527.4444 | Fax 513.527.4449
139
ISO Certificates
This is to certify that the Quality Management System of: This is to certify that the Occupational Health & Safety Management System of:
Anchor Fluid Power Anchor Fluid Power

5553 Murray Road 5553 Murray Road
Cincinnati OH 45227 Cincinnati, OH 45227
United States of America United States of America
(Central function listed above. See appendix for additional locations) Central function listed above. See appendix for additional locations
applicable to:
applicable to:
Manufacture and distribution of fluid power components, hydraulic flanges, and
Manufacture and distribution of fluid power components, hydraulic flanges, and
couplings
couplings
has been assessed and approved by
National Quality Assurance, U.S.A., against the provisions of: has been assessed and registered by NQA against the provisions of:
ISO 9001:2015 ISO 45001:2018

This registration is subject to the company maintaining an occupational health & safety
management system, to the above standard, which will be monitored by NQA.
K
For and on behalf of NQA, USA
Certificate Number: 10496
EAC Code: 18
Certified Since: August 6, 1999
Valid Until: March 8, 2023
Reissued: March 9, 2020
Cycle Issued: March 9, 2020
F
Managing Director
Certificate Number: OHS15806
EAC Code: 18
First Issued: April 14, 2015
Reissued March 9, 2020
Page 1 of 2
Page 1 of 2
The use of the UKAS Accreditation Mark indicates accreditation in respect of those activities covered by the accreditation certificate
number 015. NQA is a trading name of NQA Certification Limited, Registration No 0931758. Registered Office: Warwick House,
This approval is subject to the company maintaining its system to the required standard, which will be monitored by NQA, USA, 289
Houghton Hall Park, Houghton Regis, Dunstable LU5 5ZX. This certificate is the property of NQA and must be returned on request.
Great Road, Suite 105, Acton, MA 01720, an accredited organization under the ANSI National Accreditation Board.
This is to certify that the Quality Management System of:
Anchor Fluid Power

5553 Murray Road
Cincinnati OH 45227
United States of America
applicable to:
Manufacture and distribution of fluid power components, hydraulic flanges and

couplings
has been assessed and approved by

National Quality Assurance, U.S.A., against the provisions of:
ISO 9001:2015 and AS9100:2016

and in accordance with the requirements of AS9104/1:2012.
Certificate Number: 16925
K
EAC Code: 18
Certified Since: March 30, 2017
Reissued: March 30, 2020
Site Structure: Single Site
For and on behalf of NQA, USA
Page 1 of 1
This approval is subject to the company maintaining its system to the required standard, which will be monitored by NQA, USA, 289
Great Road, Suite 105, Acton, MA 01720, an accredited organization under the Aerospace Registrar Management Program.
INDEX
TEST POINT
ADAPTERS
*Stainless Steel
300................................................ 85 AB2................................................ 22 A03709.......................................... 50

300*............................................. 127 AB3................................................ 32 A03749.......................................... 50
301................................................ 88 ABF................................................ 40 A03750.......................................... 50
302.......................................... 75, 85 ABS/F............................................. 42 A03751.......................................... 50
VALVES
INLINE
304................................................ 86 ABS................................................ 36 A03752.......................................... 50
340................................................ 86 ACB/ACBX...................................... 97 A03754.......................................... 50
344................................................ 86 ADOS/ADOSX................................. 98 A03755.......................................... 50
390................................................ 87 AE2................................................ 20 A03758.......................................... 51
390*............................................. 127 AE3................................................ 28 A03759.......................................... 51
394................................................ 87 AE3K.............................................. 30 A03803.......................................... 51
VALVES
600................................................ 85 AEF................................................ 38 A03804.......................................... 51
BALL
600*............................................. 127 AES/F............................................. 42 CN.................................................... 9
601................................................ 88 AES................................................ 34 CP/CPX........................................... 97
602................................................ 85 AFA/AFAC..................................... 101 FN.................................................. 13
604................................................ 86 AOP/AOPX.................................... 100 FOP/FP........................................... 96
609................................................ 95 APK................................................ 46 FOPX/FPX....................................... 96
COUPLINGS
640................................................ 86 ARS................................................ 44 GSN................................................ 16
QUICK
644................................................ 86 AS/ASX........................................... 99 HCM................................................. 5
690................................................ 87 AV2................................................ 24 LK.................................................. 48
690*............................................. 127 AV3................................................ 26 LV2B........................................ 52, 78
694................................................ 87 A03004.......................................... 51 MV2B............................................. 53
699................................................ 95 A03005.......................................... 51 NN.................................................. 15
COUPLINGS
820................................................ 69 A03009.......................................... 51 P-BWSF/P-BWSFN......................... 89
WELD
825................................................ 63 A03010.......................................... 51 P-BWSFX/P-BWSFXN..................... 90
830................................................ 63 A03020.......................................... 51 PGAM............................................... 4
835................................................ 64 A03027.......................................... 51 P-WSF............................................ 91
835B.............................................. 64 A03028.......................................... 51 PTX................................................ 94
83590............................................ 70 A03029.......................................... 51 SF-2/SFX-2.................................... 84
840................................................ 69 A03030.......................................... 51 SF-2/SFX-2*................................. 126
AND RETURN
SUCTION
845................................................ 65 A03031.......................................... 51 SFO...................... 72, 73, 75, 84, 126
845B.............................................. 65 A03032.......................................... 51 SFW/SFTW..................................... 84
84590............................................ 70 A03414.......................................... 51 SFW/SFTW*................................. 126
850................................................ 67 A03440.......................................... 51 SFXO.............................................. 84
855B.............................................. 66 A03610.......................................... 51 SFXW/SFXTW................................. 84
860................................................ 67 A03620.......................................... 51 SFXW/SFXTW*............................. 126
FLANGES
865................................................ 66 A03634.......................................... 51 SP/SPX......................................... 103

C/S
880................................................ 68 A03636.......................................... 51 THM................................................. 5

885................................................ 68 A03694.......................................... 50 TPPM............................................... 4
1453.............................................. 93 A03706.......................................... 50 T-SF/T-SFN.................................... 92
51437............................................ 94 A03708.......................................... 50 T-SFX/T-SFXN................................ 92
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

141
INDEX
WP-AV...................................... 24, 26 W189........................................... 120 W37............................................. 102

W104........................................... 104 W189*.......................................... 135 W37*............................................ 128
W104*.......................................... 129 W192........................................... 106 W38............................................. 102
W106........................................... 105 W193........................................... 106 W38*............................................ 128
W106*.......................................... 130 W194........................................... 106 W39............................................. 102
W12 ............................................ 117 W195........................................... 106 W39*............................................ 128
W12* ........................................... 136 W22............................................. 116 W4............................................... 109
W13 ............................................ 117 W23............................................. 113 W4*.............................................. 131
W13* ........................................... 136 W23*............................................ 133 W43............................................. 104
W14 ............................................ 117 W24............................................. 113 W43*............................................ 129
W14* ........................................... 136 W24*............................................ 133 W44............................................. 104
W15 ............................................ 117 W25............................................. 113 W44*............................................ 129
W15* ........................................... 136 W25*............................................ 133 W45............................................. 104
W16............................................. 118 W26............................................. 114 W45*............................................ 129
W16*............................................ 137 W26*............................................ 134 W46............................................. 105
W17 ............................................ 118 W27............................................. 113 W46*............................................ 130
W17* ........................................... 137 W27*............................................ 133 W48............................................. 105
W18 ............................................ 118 W28............................................. 114 W48*............................................ 130
W18* ........................................... 137 W28*............................................ 134 W49............................................. 105
W19 ............................................ 118 W29............................................. 114 W49*............................................ 130
W19* ........................................... 137 W29*............................................ 134 W5............................................... 112
W164........................................... 119 W3............................................... 111 W51............................................. 112
W165........................................... 119 W3*.............................................. 132 W53............................................... 91
W168........................................... 119 W30............................................. 114 W56............................................. 123
W169........................................... 120 W30*............................................ 134 W57............................................. 123
W169*.......................................... 135 W300........................................... 107 W58............................................. 110
W170........................................... 119 W304........................................... 108 W59............................................. 109
W172........................................... 121 W31............................................. 111 W59*............................................ 131
W176........................................... 120 W31*............................................ 132 W6............................................... 110
W176*.......................................... 135 W32............................................. 114 W60............................................. 109
W177........................................... 121 W32*............................................ 134 W60*............................................ 131
W180........................................... 119 W33............................................. 114 W600........................................... 107
W182........................................... 121 W33*............................................ 134 W604........................................... 108
W184........................................... 119 W34............................................. 113 W61............................................. 109
W185........................................... 119 W34*............................................ 133 W61*............................................ 131
W186........................................... 120 W35............................................. 113 W62............................................. 110
W186*.......................................... 135 W35*............................................ 133 W63............................................. 110
W187........................................... 121 W36............................................. 102 W65............................................. 122
W188........................................... 119 W36*............................................ 128 W65*............................................ 138
866-FLANGES | 513.527.4444 | Fax 513.527.4449

INDEX
TEST POINT
ADAPTERS
W66............................................. 122 W76............................................. 122 W91............................................. 109
W66*............................................ 138 W76*............................................ 138 W91*............................................ 131
W69............................................. 115 W8............................................... 115
W7............................................... 115 W80............................................. 111
VALVES
INLINE
W72............................................. 109 W80*............................................ 132
W72*............................................ 131 W81............................................. 111
W75............................................. 122 W81*............................................ 132
W75*............................................ 138 W87............................................. 115
VALVES
BALL
Notes
COUPLINGS
QUICK
COUPLINGS
WELD
AND RETURN
SUCTION
FLANGES
C/S
FLANGES
S/S
866-FLANGES | 513.527.4444 | Fax 513.527.4449

143
Notes
866-FLANGES | 513.527.4444 | Fax 513.527.4449

866-FLANGES | 513.527.4444 | Fax 513.527.4449
Notes
145
S/S C/S SUCTION WELD QUICK BALL INLINE TEST POINT
FLANGES FLANGES AND RETURN COUPLINGS COUPLINGS VALVES VALVES ADAPTERS
Notes
866-FLANGES | 513.527.4444 | Fax 513.527.4449

866-FLANGES | 513.527.4444 | Fax 513.527.4449
Notes
147
Notes
866-FLANGES | 513.527.4444 | Fax 513.527.4449

866-FLANGES | 513.527.4444 | Fax 513.527.4449
Notes
149
Notes
866-FLANGES | 513.527.4444 | Fax 513.527.4449

866-FLANGES | 513.527.4444 | Fax 513.527.4449
Notes
151
Notes
866-FLANGES | 513.527.4444 | Fax 513.527.4449

866-FLANGES | 513.527.4444 | Fax 513.527.4449
Notes
153
REV 4/22
866-FLANGES | 513.527.4444 | Fax 513.527.4449


2019 Master Catalog

Uploaded by

Copyright:

Available Formats

2019 Master Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2019 Master Catalog

Uploaded by

Copyright:

Available Formats

SELECTION GUIDE

SAE HYDRAULIC 4-BOLT AND

SAE HYDRAULIC 4 BOLT AND SPLIT FLANGED FITTINGS

866-FLANGES | 513.527.4444 | Fax 513.527.4449

CODE 61 METRIC CODE 62 METRIC

12 M10 X 1.50 12 M10 X 1.50

866-FLANGES | 513.527.4444 | Fax 513.527.4449

THREAD OR SOCKET SPECIFICATION

SAE HYDRAULIC 4 BOLT AND SPLIT FLANGED FITTINGS

PRESSURE PRESSURE PRESSURE

W43 CODE 61 W104 W46 CODE 61 W106 W4 CODE 61 W61

PRESSURE PRESSURE PRESSURE

W31 CODE 61 W3 W51 CODE 61 W5 W6 CODE 61 W62

BUTT WELD CODE 61 BUTT WELD CODE 62 BLANKING

PRESSURE PRESSURE PRESSURE

W35 SCH.40 W34 W28 SCH.80 W26 W36 CODE 61 W37

W176 CODE 61 W169 W172 CODE 61 W177 AS-GP CODE 61

Flanges include both 1/4” NPTF & #4 SAE ports.

NPTF THREAD ELBOW SAE STRAIGHT THREAD ELBOW SADDLE WELD

W168 CODE 61 W170 W164 CODE 61 W165 W8 PIPE W7

PRESSURE PRESSURE PRESSURE

PRESSURE DRILLED PRESSURE THREAD

SF-2 CODE 61 *SFO SFW CODE 61 SFTW PTX-2 *PTXO

SAE HYDRAULIC 4 BOLT AND SPLIT FLANGED FITTINGS

PRESSURE PRESSURE PRESSURE

T-SF CODE 61 T-SFN FOP CODE 61 FP P-WSF CODE 61 T-WSF

BUTT WELD TO FLANGE HEAD

O-RING PRESSURE RATING FLAT FACE

P-BWSF CODE 61 P-BWSFN

Available for the following schedules of pipe:

CONNECTOR BLOCKS SHIPPING PLATES (0 PSI) MALE THREAD

ACB CODE 61 SP CODE 61 W304 CODE 61 W300

Anchor’s broad range of hydraulic flange configurations

Anchor’s commitment to quality continues to grow while

Competitive pricing has long been a trademark of Anchor Fluid

866-FLANGES | 513.527.4444 | Fax 513.527.4449

SAE HYDRAULIC 4 BOLT AND SPLIT FLANGED FITTINGS

QUICK SELECTION GUIDE

866-FLANGES | 513.527.4444 | Fax 513.527.4449

Test Point Kit 5

866-FLANGES | 513.527.4444 | Fax 513.527.4449

TPPM SERIES M16 x 2 Piston Test Points

CARBON STEEL – ZINC NICKEL PLATED, VITON

STAINLESS STEEL, VITON

Additional connection types available upon request.

PGAM SERIES M16 x 2 Direct Pressure

CARBON STEEL – ZINC NICKEL PLATED, VITON

STAINLESS STEEL, VITON

Additional connection types available upon request.

866-FLANGES | 513.527.4444 | Fax 513.527.4449

100% at 20˚C THM1620C-39 ZINC NICKEL PLATED C/S 39 M16 X 2 M16 X 2

Additional hose lengths and connection types

Test Point Kit TPK-1001

(1) ¼” NPT Direct Pressure Gauge Adapter

(1) 7/16-20 UNF SAE thread Direct Pressure Gauge Adapter

866-FLANGES | 513.527.4444 | Fax 513.527.4449

866-FLANGES | 513.527.4444 | Fax 513.527.4449

Carbon Steel Needle Valves 14

Carbon Steel Gauge Shutoff Valves 16

Check Valves - Carbon Steel

SF-2 CODE 61 SFO SFW CODE 61 SFTW PTX-2 PTXO