M-SERIES CRAWLER DOZERS

1150M I 1650M I 2050M

TECHNOLOGY
THAT PAYS

www.casece.com
EXPERTS FOR THE REAL WORLD
SINCE 1842
 M-SERIES
CRAWLER DOZERS

EXPERTS FOR THE REAL WORLD

SINCE 1842
1842 Case is founded.
1946 Allis-Chalmers is the first manufacturer to introduce a torque converter on dozers.
In the 30s they had invented permanently lubricated track rollers and sealed and
lubricated tracks.
1951 First Case dozer made in cooperation with ATC and promoted under Terratrack brand.
1956 Case acquires ATC and is the first manufacturer to introduce tracks counterrotation on
the 1000 Series Terratrack dozer.

2
 HERITAGE
A TRADITION OF INDUSTRY FIRSTS

1974 FIAT acquires Allis-Chalmers and in the 70s introduces the exclusive “Equistatic”
geometry on bulldozer machines. In the late 90s Case launches its exclusive “CASE
Extended Life Track” undercarriage.
2008 Case introduces the “Dual Path” hydrostatic transmission on the “K” series.
2013 Case is the first to introduce SCR technology on the “M” series dozer for
regulated countries.
2015 Case extends its European product line-up with the new grader range.

3
 M-SERIES
CRAWLER DOZERS

HIGH EFFICIENCY
Next generation engine
The state of the art common rail engine delivers top
performance in load response, max torque, power
and fuel economy.
The combustion is optimised for maximum
efficiency, occurring at high temperatures and using
100% fresh, cool air, as the air intake is separated
from the exhaust.
The turbocharged engine with an Air-to-Air
intercooler relies on well proven multi injection
technology to maximize torque back-up and fuel
efficiency with reduced engine noise and vibrations.

10% lower fuel consumption

The common rail engine ensure an optimised engine efficiency.
The second generation common rail
injection system ensures higher injection pressures at all rpm. The electronically controlled injection always matches
power to the lowest possible fuel consumption.
The M Series engine can run with 20% biodiesel, reducing even further its environmental impact.

Never ending power

The powerful Case engine ensures high torque back-up under load. When the tractive effort grows and the rpm tends to
drop, the engine power grows up to 16% till 1800 rpm. The result: constant performance and higher pulling capacity. In
addition, the ability to work with high torque at lower engine rpm reduces engine wear.

SUPERIOR COOLING EFFICIENCY

Fresh air breathing engine
The cooling package of the 1650M and 2050M has been redesigned
and fitted with a hydrostatic reversible fan. In the new design, the
radiators are mounted with no overlap, so that each radiator receives
fresh air, maintaining constant fluid temperatures. The hydrostatic
fan continuously adapts its speed to match the real cooling demand,
reducing power absorption. The reversing mode reduces maintenance
needs and lengthens cleaning intervals.

4
 ENGINE AND TRANSMISSION
DRAWBAR PULL LEADERSHIP

EXTRA POWERED TRANSMISSION

Unmatched drawbar pull
The entirely re-engineered transmission offers best-in-class pulling capacity combined with the typical manoeuvrability of
the hydrostatic solution.

The triple reduction final drive adds a planetary reduction to the standard double one.
The hydrostatic transmission can work at a faster speed, reducing the overall pressure and
consequently the effort on the single components. The two final drives are directly flanged on the
main frame for better effort distribution and easy disassembling for extraordinary maintenance.

HIGH RELIABILITY
“CELT” Case extended life tracks
Case tracks technology supports the enormous drawbar pulling capacity of the M Series.
The exclusive rotating bushing technology of the Case Extended Life Track (CELT) can double
the tracks’ life, dramatically reducing maintenance costs. In addition, the sprocket is made with
40% more material, extending the life of its teeth. When you consider that maintenance of the
undercarriage represents on average 50% of a dozer maintenance costs, the Case solution
brings a clear benefit for the most demanding customers.

5
 M-SERIES
CRAWLER DOZERS

VERSATILE CONTROLS
Agile and strong
The operator has full control of the massive power of the M Series dozer. The electrohydraulic joystick enables them to
customise the reversing and steering sensitivity for faster and more efficient cycles. The decelerator pedal can be set to
reduce either travel speed only or both travel and engine speed.

Automatic blade functions

The advanced electronics functions enable the operator to control specific functions in addition to the standard blade
movements:
- the on-board computer can be set directly from the joystick;
- the blade reaction can be set choosing from 3 levels of sensitivity;
- the grading button immediately reduces the speed of the blade by 50% for more accurate soil contour;
- the shaking mode enables the operator to shed material quickly, especially when working with sticky soil.

HIGH VISIBILITY
Drive your performance forward!
The M series cab is engineered for operator performance, comfort and safety. The new positioning, further forward on
the machine, ensures complete blade visibility. The operator can work with confidence and more productively in every
operation. The air suspended seat is easy to adjust, providing every operator with a perfect working position.
The powerful air conditioning system combined with the best-in-class noise level provide an excellent working
enviroment, reducing operator stress during long working days.

6
 CUSTOMIZABLE CONTROLS
PRODUCTIVITY BOOSTING ELECTRONICS

BLADE CONTROL SET UP

Flexible performance
The M series is ready to work with the most common blade controls available on the market. The machine can be
prepared in the factory for a specific configuration, ensuring perfect wire layout, visibility and component integration,
guaranteeing the high standards of reliability of every Case product are maintained.

HIGH VERSATILITY
Tools for every task
A wide offering of implements and equipments can be installed on the new CASE dozer:
• Drawbar • 3 shanks parallel ripper
• Front cab protections and grids • Winches predisposition

A choice of blades are available for optimum dozing performance:

• PAT • Foldable PAT (reduces the transport width within 3 m) • Straight • Semi-U

BULLDOZER “EQUISTATIC” GEOMETRY

Balanced pushing effort
All the Bulldozer units offer the patented «Equistatic» system that increases the tilting capability, while reducing the efforts
on the pushbeams, increasing the overall frame reliability and reducing the overall wear of components.

7
 QUICK GROUND ACCESS
FOR SERVICING

SAFE AND EASY MAINTENANCE

Ground access for servicing
The hydrostatic transmission brings less complexity and lower
maintenance requirements than a traditional one. Belly plates on
the bottom of the machine provide excellent access to controls
and transmission components.
The final drive installation on the main dozer frame enables
dismounting while leaving the hydrostatic components in place.
The transmission can even be reached through the cab floor,
so it can be serviced directly on the jobsite.

The refueling points are conveniently placed on the rear

of the cab in a well-protected place.
The daily maintenance can be done quickly thanks to
dedicated steps that make the access easier and safer.

The new single piece main frame enables you to

service the main controls easily from the ground,
simply opening the wide lateral shieldings.
Oil levels, battery status, electric components, filters
and the emergency cut off switches are rationally
grouped and clearly identified with colour coding.
With the M Series, you can quickly get ready for
your working day.

8
 TELEMATICS*

THE SCIENCE BIT

The Case SiteWatch telematics system uses a high-tech control unit mounted on
each machine to collate information from that machine and from GPS satellites.
This data is then sent wirelessly through the mobile communication networks to
the Case Telematics Web Portal.

SiteWatch: centralised fleet control benefits

at your fingertips
Measure your true asset availability and optimise it
• Eliminate the “phantom fleet”: SiteWatch allows to identify spare units or
under loaded machines on each site.
• Become able to reallocate units where they are more needed.
• Forward Maintenance Planning is easier since the actualised working
hours are always available.
• Extend the benefits of SiteWatch to the rest of your fleet: SiteWatch can be
installed on the units of other brands as well.

Challenge your Total Cost of Ownership!

• Being able to compare the fuel usage of different machine types will allow
you choose the right equipment.
• Save on transport costs with planned and grouped maintenance tasks.
• Peace of mind, optimised uptime and lower repair costs:
with preventive maintenance you can for example be alerted if the engine
needs to be serviced and avoid a disruptive breakdown.
• Be able to compare your asset Return On Investment on different sites.
• Your equipment is used only during working hours. You can set up alerts
so that you know if it is in use during the weekend or at night.
• Integrate with the programmed maintenance package, so that you can be
sure every machine is at the right place at the right time.

More Safety, Lower Insurance Premium

• Keep thieves away: dissuade them from attacking your asset because it is
geo-localised. SiteWatch is hidden so that thieves can’t find it quickly.
• Your fleet is used only where you decide. You can define a virtual fence
and receive an email when a machine exits that perimeter.

* Availability in your country to be verified

9
 MAIN REASONS
TO CHOOSE THE M-SERIES

HIGH EFFICIENCY
- The FPT engine with high power
and torque density provides the
best-in-class performances in any
application either in heavy dozing
or fine grading.

EXTRA POWERED TRANSMISSION

- Dual path transmission - Continuous power
transfer delivers more productivity, stepless
shifting, absolute bulldozer controllability.
- 3 stages final drives - High transmission final
reduction lessens stress on the hydrostatic
transmission and increases drawbar pull.

BLADE CONTROL SET UP

- Leading brands plug and play
blade control system.

HIGH VERSATILITY
- The wide variety of options and bulldozers
offers,every customer the possibility of creating VERSATILE CONTROLS
a machine tailored for the most demanding - Electronically controlled fast material drop
applications in different environments. from the blade in sticky conditions. All the
main working parameters can be set to
satisfy customer requirements.
10
EASY MAINTENANCE HIGH VISIBILITY
- The functional groups are located beside the - The cab, positioned 100 mm
cab for quick intervention. forward, ensures best-in-class
- The transmission components can be visibility on the blade corner
checked directly under the cab floor. as well as better bulldozer
weight distribution.

SUPERIOR COOLING
EFFICIENCY
- Double cooling surface and
no overlapping of radiators.
The reversible fan keeps the
exchanging area clean and
dramatically extends service
intervals.

BULLDOZER “EQUISTATIC” GEOMETRY HIGH RELIABILITY

- “CASE Extended Life Tracks”: dramatically
- Emphasizes blade tilting while compensating twisting
reduces total cost of ownership by 50%.
effort on the push beams device.
 M-SERIES
CRAWLER DOZERS

1150M SPECIFICATIONS

ENGINE ELECTRICAL SYSTEM

Model _________________________FPT F4HFA613L*E002 Tier 2 Alternator ____________________________________120 amps
Cylinders ___________________________________________6 Batteries (2) ________________________12-volt, low-maintenance
Displacement ____________________________________ 6.7 l 925 cold-cranking amps @ -18°C
Fuel injection ____________________________________ Direct
Fuel filter ________________________ Spin-on w/ in-line strainer OPERATOR ENVIRONMENT
Air intake____________________________________Cross-flow ROPS/FOPS cab; Pneumatically suspended seat; Seat belt;
Cooling ________________________________________ Liquid Adjustable armrests; Foot rests; Tool storage area; Headliner; Floor
Engine speeds ____________________________________ RPM mat; Mirror; Noise level 78dbA.
High idle – no load ___________________________ 2200 +/- 50 Warning lights:
Rated – full load __________________________________2000 Air filter; Alternator; Diagnostic fault indicator; Engine coolant
Low idle __________________________________ 1100 +/- 25 temperature; Engine oil pressure; Hydraulic filter; Low fuel level;
Horsepower SAE J1349: Park brake engaged; Service soon indicator; Transmission filter;
Engine rated net power ___________ 127 hp - 95 kW @ 2200 rpm Transmission charge pressure.
Engine max net power ____________138 hp - 103 kW @2200 rpm Gauges:
Rated net torque ________________________________612 Nm Battery voltage; Digital hourmeter/tachometer diagnostic/service
Max net torque _________________________________632 Nm reminder; Fuel level; Transmission oil temperature; Transmission
Engine lubrication speed indicator; Water temperature.
Pump __________________ Deep sump plate cooler w/ pressurized Audible warnings:
under-piston nozzles Engine coolant temperature; Engine oil pressure; Low fuel
Pump operating angle ratings: level, Transmission charge pressure; Transmission/hydraulic
Side-to-side_______________________________________ 35° temperature; Rear wiper for cab; Internal mirror; Radio.
Fore and aft _______________________________________ 45°
Radiator:
Core size area (Water Radiator) ______________________ 0.26 m2
HYDRAULICS
Rows of tubes ______________________________________ 25 Pump flow @ 2200 RPM _________________________ 137 l/min
Fan Max pressure___________________________________ 206 bar
Diameter _____________________________________ 662 mm Lift cylinder™ ____________________________________ nr. 2
Ratio __________________________________________ 0,96:1 Bore diameter __________________________________ 108 mm
Rod diameter __________________________________ 50.8 mm
POWERTRAIN Stroke ________________________________________ 488 mm
Angle cylinder ____________________________________ nr. 2
Dual path hydrostatic Bore diameter ________________________________ 114.3 mm
Pump ________________________________Variable axial piston Rod diameter __________________________________ 63.5 mm
Motor ____________________________ Variable bent axis piston Stroke ______________________________________ 465.7 mm
Max. drawbar pull* ______________________________ 213.5 kN Tilt cylinder ______________________________________ nr. 1
Transmission _______ Single lever control electronic straight tracking Bore diameter __________________________________ 127 mm
Oil filter _______________________ 2 micron, spin-on, replaceable Rod diameter __________________________________ 63.5 mm
Travel speeds* Stroke ______________________________________ 148.3 mm
Forward____________________________________0 – 9.3 km/h
Reverse ____________________________________0 – 9.3 km/h
Parking brakes____________________ Heavy-duty, spring-applied,
SERVICE CAPACITY
hydraulic pressure release Fuel tank ________________________________________ 322 l
Steering brakes _______________________________ Hydrostatic Engine oil w/ filter _________________________________ 16.4 l
Final drive ____________2 helical gear reduction to planetary output Engine oil w/o filter ________________________________ 15.6 l
Ratio __________________________________________ 61.4:1 Engine cooling system ______________________________ 26.5 l
Hydraulic reservoir ________________________________ 116.4 l
TRANSMISSION COOLING Final drive (per side) ________________________________ 14.2 l
Track rollers (ea) _________________________________ 0.275 l
Type _________________________________________ Oil to air Front idlers (ea) __________________________________ 0.225 l
Core size _______________________________________ 0.41m2 Carrier rollers – each ______________________________ 0.334 l

*Measured using standard track chain. Increase travel speeds by 4% and reduce
drawbar pull by 4% w/ the optional CELT track chain

12
 SPECIFICATIONS

UNDERCARRIAGE BLADE
Track adjustment _______________________________ Hydraulic Variable blade pitch ____________________________ 55° +/- 5°
Frame _______Oscillating equalizer beam suspension and pivot shaft Lift speed – per second ___________________________ 503 mm
Track link pitch ________________________________ 175 mm Cutting edge ________________________ Reversible, replaceable
Track shoe height_______________________________ 52.5 mm Width ______________________________________ 203.2 mm
Pin diameter _________________________________ 36.58 mm Thickness ____________________________________ 19.1 mm
Bushing diameter
CLT track _______________________________________ 62 mm RIPPER
CELT track ______________________________________ 79 mm Max. penetration ________________________________ 478 mm
Track shoes per side Width _______________________________________ 1711 mm
CLT track __________________________________________ 43 Cut _________________________________________ 1635 mm
CELT track _________________________________________ 43 Max. ground clearance ____________________________ 424 mm
Track rollers per side __________________________________ 7 Max. number of shanks ________________________________ 3
Carrier rollers per side _________________________________ 2 Tooth spacing
Track roller rail diameter ___________________________ 190 mm w/3 teeth______________________________________ 785 mm
Track on ground Hydraulic cylinder ___________________________ Double-acting
Shoe area Diameter ______________________________________ 102 mm
508 mm ____________________________________ 26323 cm2 Stroke ________________________________________ 254 mm
559 mm ____________________________________ 28965 cm2 Rod ___________________________________________ 51 mm
660 mm ____________________________________ 34199 cm2
762 mm ____________________________________ 39484 cm2

OPERATING WEIGHT
Unit equipped CAB, full fuel tank, 170 lb (77 kg) operator, side shield, track guides, backup alarm, horn, lights and rear retrieval hitch.

Weight (kg) Add-on weights Weight (kg) CELT chains Weight (kg)
Long Track 14122 Drawbar 66 20” (508 mm) 2276
Wide Track 14549 Ripper (3 shank) 1043 22” (559 mm) 2422
Low Ground Pressure 14804 Front counterweight 432 26” (660 mm) 2592
30” (762 mm) 2802
Center rockguard 134
Sweeps 63

TRACK AND SHOE OPTIONS

LT (Long Tracks) WT (Wide Tracks) LGP (Low Ground Pressure)

508 mm closed grousers and CLT 559 mm closed grousers and CLT 762 mm closed grousers and CLT
508 mm open grousers and CELT 559 mm open grousers and CELT 762 mm open grousers and CELT
559 mm closed grousers and CLT 660 mm closed grousers and CLT
559 mm open grousers and CELT 660 mm open grousers and CELT

13
 M-SERIES
CRAWLER DOZERS

1150M GENERAL DIMENSIONS

C

G J
K

H A

B D
F
I
Line drawings are for illustrative purpose only and may not be exact representation of unit.

LT (Long Track) WT (Wide Track) LGP (Low Ground Pressure)

BLADES
Blade width 3048 mm 3353 mm 3353 mm
SAE blade capacity 2.87 m3 3.18 m3 3.18 m3
A Blade height 1120 mm 1120 mm 1120 mm
Blade lift above ground 956 mm 956 mm 956 mm
B Blade depth below ground 539 mm 590 mm 590 mm
C Blade angle both directions 25° 25° 25°
Blade tilt, each end (up to 8.3°) 430 mm 450 mm 450 mm
D Cast reach track coverage 380 mm 370 mm 319 mm
E Cut reach track coverage 24 mm 12 mm 63 mm
TRACKS
Track gauge 1830 mm 2030 mm 2030 mm
Max shoe width 559 mm 660 mm 762 mm
F Track on ground 2590 mm 2590 mm 2590 mm
Area of track on ground 2.90 m2 3.42 m2 3.95 m2
Ground pressure 0.44 kg/cm2 * 0.37 kg/cm2 ** 0.32 kg/cm2 ***
DIMENSIONS
G Height to top of cab 2948 mm 2948 mm 2948 mm
H Ground clearance 330 mm 330 mm 330 mm
I Length
- Blade straight with drawbar 5080 mm 5080 mm 5080 mm
- Blade straight with ripper 6150 mm 6150 mm 6150 mm
Width
- Blade straight 3048 mm 3353 mm 3353 mm
J Blade angled 2773 mm 3050 mm 3050 mm
K Over track 2396 mm 2692 mm 2794 mm
*with 559 mm shoes
** with 660 mm shoes
***with 762 mm shoes

NOTE: Ground clearance and overall height dimensions are with the grousers fully penetrated. Add 52.5 mm if unit is on solid surface.

14
SPECIFICATIONS

15
 M-SERIES
CRAWLER DOZERS

1650M SPECIFICATIONS

ENGINE ELECTRICAL SYSTEM

Model ________________________ FPT F4HFA613M*E002 Tier 2 Alternator ____________________________________120 amps
Cylinders ___________________________________________6 Batteries (2) ________________________12-volt, low-maintenance
Displacement ____________________________________ 6.7 l 925 cold-cranking amps @ -18°C
Fuel injection __________________________ Direct common rail
Fuel filter ________________________ Spin-on w/ in-line strainer OPERATOR ENVIRONMENT
Air intake____________________________________Cross-flow ROPS/FOPS cab; Pneumatically suspended seat; w/ back
Cooling ________________________________________ Liquid adjustment; Seat belt; Adjustable armrests; Foot rests; Tool storage
Engine speeds ____________________________________ RPM area; Headliner; Floor mat; Tilting seat platform; Noise Level 75 dbA.
High idle – no load ___________________________ 2200 +/- 50 Warning lights:
Rated – full load __________________________________2000 Air filter; Alternator; Diagnostic fault indicator; Engine coolant
Low idle ___________________________________ 800 +/- 25 temperature; Engine oil pressure; Hydraulic filter; Low fuel level;
Horsepower SAE J1349: Park brake engaged; Service soon indicator; Transmission filter;
Engine rated net power __________ 150 hp - 112 kW @ 2200 rpm Transmission charge pressure.
Engine max net power ____________164 hp - 122 kW @2200 rpm Gauges:
Rated net torque ________________________________666 Nm Battery voltage; Digital hourmeter/tachometer diagnostic/service
Max net torque _________________________________726 Nm reminder; Fuel level; Transmission oil temperature; Transmission
Engine lubrication speed indicator; Water temperature.
Pump __________________ Deep sump plate cooler w/ pressurized Audible warnings:
under-piston nozzles Engine coolant temperature; Engine oil pressure; Low fuel
Pump operating angle ratings: level, Transmission charge pressure; Transmission/hydraulic
Side-to-side_______________________________________ 35° temperature.
Fore and aft _______________________________________ 45°
Radiator:
Core size area (Water Radiator) ______________________ 0.61 m2
HYDRAULICS
Rows of tubes _______________________________________ 4 Pump flow @ 2200 RPM _________________________ 137 l/min
Fan Max pressure___________________________________ 248 bar
Diameter _____________________________________ 700 mm Lift Cylinder PAT _________________________________ nr. 2
Ratio _________________________________ hydraulically driven Bore diameter ________________________________ 114.3 mm
Rod diameter __________________________________ 63.5 mm
POWERTRAIN Stroke ________________________________________ 428 mm
Angle cylinder PAT ________________________________ nr. 2
Dual path hydrostatic Bore diameter __________________________________ 114 mm
Pump ________________________________Variable axial piston Rod diameter __________________________________ 63.5 mm
Motor ____________________________ Variable bent axis piston Stroke ______________________________________ 502.7 mm
Max. drawbar pull* ________________________________ 311 kN Tilt cylinder PAT __________________________________ nr. 1
Transmission _______ Single lever control electronic straight tracking Bore diameter __________________________________ 127 mm
Oil filter _______________________ 2 micron, spin-on, replaceable Rod diameter __________________________________ 63.5 mm
Travel speeds* Stroke ______________________________________ 148.3 mm
Forward____________________________________0 – 9.3 km/h Lift cyclinder Bull Dozer
Reverse ____________________________________0 – 9.3 km/h Bore diameter _________________________________ 82.6 mm
Parking brakes____________________ Heavy-duty, spring-applied, Rod diameter __________________________________ 50.8 mm
hydraulic pressure release Stroke _______________________________________ 1000 mm
Steering brakes _______________________________ Hydrostatic Tilt cylinder Bull Dozer
Final drive ____________2 helical gear reduction to planetary output Bore diameter ________________________________ 114.3 mm
Ratio __________________________________________ 61.4:1 Rod diameter __________________________________ 36.5 mm
Stroke ________________________________________ 126 mm
TRANSMISSION COOLING
Type _________________________________________ Oil to air
Core size _______________________________________ 0.31m2

*Measured using standard track chain. Increase travel speeds by 4% and reduce
drawbar pull by 4% w/ the optional CELT track chain

16
 SPECIFICATIONS

SERVICE CAPACITY TRACK ON GROUND

Fuel tank ________________________________________ 322 l Shoe area
Engine oil w/ filter _________________________________ 16.4 l 559 mm ____________________________________ 34093 cm2
Engine oil w/o filter ________________________________ 15.6 l 610 mm ____________________________________ 37204 cm2
Engine cooling system ______________________________ 30.2 l 711 mm ____________________________________ 49524 cm2
Hydraulic reservoir _________________________________ 160 l 819 mm ____________________________________ 37204 cm2
Final drive - per side _______________________________ 14.2 l 864 mm ____________________________________ 52695 cm2
Track rollers - each _______________________________ 0.275 l
Front idlers - each ________________________________ 0.225 l BLADE
Carrier rollers - each ______________________________ 0.334 l Variable blade pitch - adjustable ___________________ 55° +/- 5°
Lift speed - per second____________________________ 483 mm
UNDERCARRIAGE Cutting edge ________________________ Reversible, replaceable
Track adjustment _______________________________ Hydraulic Width ________________________________________ 200 mm
Frame _______Oscillating equalizer beam suspension and pivot shaft Thickness ______________________________________ 20 mm
Track link pitch
CLT track ______________________________________ 190 mm RIPPER
CELT track _____________________________________ 190 mm Max. penetration ________________________________ 570 mm
Track shoe height_________________________________ 56 mm Width _______________________________________ 1953 mm
Pin diameter ____________________________________ 38 mm Cut width_____________________________________ 1889 mm
Bushing diameter Max. ground clearance ____________________________ 592 mm
CLT track _______________________________________ 65 mm Max. number of shanks ________________________________ 3
CELT track ______________________________________ 86 mm Tooth spacing
Track shoes per side w/3 teeth______________________________________ 944 mm
CLT track __________________________________________ 45 Hydraulic cylinder ___________________________ Double-acting
CELT track _________________________________________ 45 Diameter ______________________________________ 155 mm
Track rollers per side __________________________________ 8 Stroke ________________________________________ 596 mm
Carrier rollers per side _________________________________ 2 Rod ___________________________________________ 69 mm
Track roller rail diameter _________________________ 171.5 mm

OPERATING WEIGHT
Operating weight includes cab, full fuel and hydraulic tanks, 170 lb (77 kg) operator, CLT chain, front pull hook, rear retrieval hitch, track guides,
back up alarm, horn, lights, track shoe, C-frame and blade width as noted.

Weight (kg) Add-on weights Weight (kg) CELT Chains Weight (kg)
17123 kg PAT Drawbar 66 22” (559 mm) 3021
Extra Long Track
18030 kg Semi-U Ripper (3 shank) 1355 24” (610 mm) 3161
Wide Track 17531 kg PAT Winch 2500 28” (711 mm) 3423
Low Ground Pressure 17940 kg PAT 32” (819 mm) 3602
34” (864 mm) 3827
Center rockguard 259
Sweeps 63

17
 M-SERIES
CRAWLER DOZERS

1650M TRACK AND SHOE OPTIONS

XLT (Extra Long Tracks) WT (Wide Tracks) LGP (Low Ground Pressure)
559 mm closed grousers and CLT 711 mm closed grousers and CLT 864 mm closed grousers and CLT
559 mm open grousers and CELT 711 mm open grousers and CELT 864 mm open grousers and CELT
610 mm closed grousers and CLT 819 mm closed grousers and CLT
610 mm open grousers and CELT 819 mm open grousers and CELT

BLADE DIMENSIONS Bull Dozer Semi-U Straight PAT Straight PAT Foldable PAT
Blade Capacity SAE J1265 4.84 m3 3.27 m3 4.04 m3 4.04 m3
Undercarriage available XLT XLT WT-LGP WT - LGP
J Blade width 3322 mm 3302 mm 3962 mm 3962 mm
Blade width in transport position 3322 mm 3096 mm 3574 mm 2887 mm
A Blade height 1319 mm 1180 mm 1000 mm 1000 mm
Max. Tilt +/- 420 mm +/- 450 mm +/- 550 mm +/- 550 mm
Max. Pitch +/- 5° +/- 5 ° +/- 5 ° +/- 5 °
C Max. Angle - +/- 28° +/- 28° +/- 28°
B Digging depth. 596 mm 539 mm 590 mm 590 mm
Max lift above ground 1133 mm 1130 mm 1130 mm 1130 mm
D Cast reach track coverage 468 mm 457 mm 558 mm 584 mm
E Cut reach track coverage 468 mm 53 mm 154 mm 80 mm

18
 SPECIFICATIONS

1650M GENERAL DIMENSIONS

G J
K

H A

B D
F
I
Line drawings are for illustrative purpose only and may not be exact representation of unit.

XLT (Extra Long Track) WT (Wide Track) LGP (Low Ground Pressure)
TRACKS
Track gauge 1930 mm 2180 mm 2180 mm
Max shoe width 610 mm 819 mm 864 mm
F Track on ground 3050 mm 3050 mm 3050 mm
Area of track on ground 3.72 m2 4.30 m2 5.26 m2
Ground pressure 0.42 kg/cm2 * 0.38 kg/cm2 ** 0.31 kg/cm2 ***
DIMENSIONS
G Height to top of cab 2948 mm 2948 mm 2948 mm
H Ground clearance 321 mm 321 mm 321 mm
I Length
5678 mm PAT
- Blade straight with drawbar 5678 mm 5678 mm
5928 mm Semi-U
6670 mm PAT
- Blade straight with ripper 6670 mm 6670 mm
6920 mm Semi-U
Width
3302 mm PAT
- Blade straight 3962 mm PAT 3962 mm PAT
3332 mm Semi-U
3574 mm PAT 3574 mm PAT
J Blade angled 3000 mm PAT
2887 mm PAT Foldable 2887 mm PAT Foldable
2489 mm with 2997 mm with 3044 mm with
K Over track
559 mm shoes 819 mm shoes 864 mm shoes

* with 610 mm shoes and PAT blade

** with 711 mm shoes and PAT blade
*** with 864 mm shoes and PAT blade
NOTE: Ground clearance and overall height dimensions are with the grousers fully penetrated. Add 52.5 mm if unit is on solid surface.
19
 M-SERIES
CRAWLER DOZERS

2050M SPECIFICATIONS

ENGINE ELECTRICAL SYSTEM

Model __________________________FPT F4FA613N*E002 Tier 2 Alternator ____________________________________120 amps
Cylinders ___________________________________________6 Batteries (2) ________________________12-volt, low-maintenance
Displacement ____________________________________ 6.7 l 1200 cold-cranking amps @ -18°C
Fuel injection __________________________ Direct common rail
Fuel filter ________________________ Spin-on w/ in-line strainer OPERATOR ENVIRONMENT
Air intake____________________________________Cross-flow ROPS/FOPS cab; Pneumatically suspended seat; w/ back
Cooling ________________________________________ Liquid adjustment; Seat belt; Adjustable armrests; Foot rests; Tool storage
Engine speeds ____________________________________ RPM area; Headliner; Floor mat; Tilting seat platform; Noise level 78dbA.
High idle – no load ___________________________ 2200 +/- 50 Warning lights:
Rated – full load __________________________________2000 Air filter; Alternator; Diagnostic fault indicator; Engine coolant
Low idle ___________________________________ 800 +/- 25 temperature; Engine oil pressure; Hydraulic filter; Low fuel level;
Horsepower SAE J1349: Park brake engaged; Service soon indicator; Transmission filter;
Engine rated net power __________ 214 hp - 160 kW @ 2200 rpm Transmission charge pressure.
Engine max net power ____________232 hp - 173 kW @2200 rpm Gauges:
Rated net torque _______________________________1004 Nm Battery voltage; Digital hourmeter/tachometer diagnostic/service
Max net torque ________________________________1082 Nm reminder; Fuel level; Transmission oil temperature; Transmission
Engine lubrication speed indicator; Water temperature.
Pump __________________ Deep sump plate cooler w/ pressurized Audible warnings:
under-piston nozzles Engine coolant temperature; Engine oil pressure; Low fuel
Pump operating angle ratings: level, Transmission charge pressure; Transmission/hydraulic
Side-to-side_______________________________________ 35° temperature.
Fore and aft _______________________________________ 45°
Radiator:
Core size area (Water Radiator) ______________________ 0.33 m2
HYDRAULICS
Rows of tubes _______________________________________ 4 Pump flow @ 2200 RPM _________________________ 160 l/min
Fan Max pressure___________________________________ 248 bar
Diameter _____________________________________ 700 mm Lift Cylinder PAT _________________________________ nr. 2
Ratio _________________________________ hydraulically driven Bore diameter ________________________________ 114.3 mm
Rod diameter __________________________________ 63.5 mm
POWERTRAIN Stroke ________________________________________ 428 mm
Angle cylinder PAT ________________________________ nr. 2
Dual path hydrostatic Bore diameter __________________________________ 114 mm
Pump ________________________________Variable axial piston Rod diameter __________________________________ 63.5 mm
Motor ____________________________ Variable bent axis piston Stroke ______________________________________ 502.7 mm
Max. drawbar pull* ________________________________ 372 kN Tilt cylinder PAT __________________________________ nr. 1
Transmission _______ Single lever control electronic straight tracking Bore diameter __________________________________ 127 mm
Oil filter _______________________ 2 micron, spin-on, replaceable Rod diameter __________________________________ 63.5 mm
Travel speeds* Stroke ______________________________________ 148.3 mm
Forward____________________________________0 – 9.3 km/h Lift cyclinder Bull Dozer
Reverse ____________________________________0 – 9.3 km/h Bore diameter _________________________________ 82.6 mm
Parking brakes____________________ Heavy-duty, spring-applied, Rod diameter __________________________________ 50.8 mm
hydraulic pressure release Stroke _______________________________________ 1000 mm
Steering brakes _______________________________ Hydrostatic Tilt cylinder Bull Dozer
Final drive ____________2 helical gear reduction to planetary output Bore diameter ________________________________ 114.3 mm
Ratio _________________________________________ 48.75 :1 Rod diameter __________________________________ 36.5 mm
Stroke ________________________________________ 126 mm
TRANSMISSION COOLING
Type _________________________________________ Oil to air
Core size _______________________________________ 0.31m2

*Measured using standard track chain. Increase travel speeds by 4% and reduce
drawbar pull by 4% w/ the optional CELT track chain

20
 SPECIFICATIONS

SERVICE CAPACITY TRACK ON GROUND

Fuel tank ________________________________________ 405 l Shoe area
Engine oil w/ filter _________________________________ 16.4 l 610 mm __________________________________ 32269 cm2 LT
Engine oil w/o filter ________________________________ 15.6 l 39979 cm2 XLT
Engine cooling system ______________________________ 30.2 l 711 mm _________________________________ 46599 cm2 WT
Hydraulic reservoir _________________________________ 210 l 762 mm _________________________________ 49941 cm2 WT
Final drive - per side ________________________________ 25 l 914 mm _________________________________59904 cm2 LGP
Track rollers - each _______________________________ 0.275 l
Front idlers - each ________________________________ 0.225 l BLADE
Carrier rollers - each ______________________________ 0.334 l Variable blade pitch - adjustable ___________________ 55° +/- 5°
Lift speed - per second____________________________ 483 mm
UNDERCARRIAGE Cutting edge ________________________ Reversible, replaceable
Track adjustment _______________________________ Hydraulic Width ________________________________________ 200 mm
Frame _______Oscillating equalizer beam suspension and pivot shaft Thickness ______________________________________ 20 mm
Track link pitch
CLT track ______________________________________ 203 mm RIPPER
CELT track _____________________________________ 203 mm Max. penetration ________________________________ 570 mm
Track shoe height_______________________________ 71.5 mm Width _______________________________________ 1953 mm
Pin diameter ____________________________________ 44 mm Cut width_____________________________________ 1889 mm
Bushing diameter Max. ground clearance ____________________________ 592 mm
CLT track _______________________________________ 72 mm Max. number of shanks ________________________________ 3
CELT track ______________________________________ 93 mm Tooth spacing
Track shoes per side w/3 teeth______________________________________ 944 mm
CLT/CELT track____________________________________ 40 LT Hydraulic cylinder ___________________________ Double-acting
45 XLT /WT/LGP Diameter ______________________________________ 155 mm
Track rollers per side Stroke ________________________________________ 596 mm
LT ________________________________________________ 7 Rod ___________________________________________ 69 mm
XLT/WT-LGP_________________________________________ 8
Carrier rollers per side _________________________________ 2
Track roller rail diameter _________________________ 187.5 mm

OPERATING WEIGHT
Operating weight includes cab, full fuel and hydraulic tanks, 170 lb (77 kg) operator, CLT chain, front pull hook, rear retrieval hitch, track guides,
back up alarm, horn, lights, track shoe, C-frame and blade width as noted.

Weight (kg) Add-on weights Weight (kg) CELT chains Weight (kg)
20213 kg PAT Drawbar 66 24” (610 mm) 3182
Long
20206 kg Straight Ripper (3 shank) 1355 28” (711 mm) 3928
Track
20485 kg Semi-U Winch 2500 30” (762 mm) 4018
20599 kg PAT 36” (914 mm) 4628
Extra Long
20592 kg Straight Center rockguard
Tracks
20871 kg Semi-U LT 221
XLT/WT/LGP 306
21269 kg PAT
Wide
21971 kg PAT Foldable Sweeps 63
Tracks
21431 kg Straight

22115 kg PAT
Low Ground
22790 kg PAT Foldable
Pressure
22131 kg Straight
21
 M-SERIES
CRAWLER DOZERS

2050M TRACK AND SHOE OPTIONS

LT (Long Tracks) XLT (Extra Long Tracks) WT (Wide Tracks)

610 mm closed grousers and CLT 610 mm closed grousers and CLT 711 mm closed grousers and CLT
610 mm open grousers and CELT 610 mm open grousers and CELT 711 mm open grousers and CELT
762 mm closed grousers and CLT
762 mm open grousers and CELT

LGP (Low Ground Pressure)

914 mm closed grousers and CLT
914 mm open grousers and CELT

Bull Dozer Bull Dozer Bull Dozer Straight Straight Foldable

BLADE DIMENSIONS Straight Straight Semi-U PAT PAT PAT
Blade Capacity SAE J1265 3.22 m3 3.78 m3 5.60 m3 4.83 m3 5.54 m3 5.54 m3
Undercarriage available LT -XLT WT - LGP LT-XLT LT-XLT WT-LGP WT - LGP
J Blade width 3334 mm 3901 mm 3426 mm 3606 mm 4064 mm 4064 mm
Blade width in transport position 3334 mm 3901 mm 3426 mm 3287 mm 3690 mm 3023 mm
A Blade height 1108 mm 1108 mm 1425 mm 1369 mm 1369 mm 1369 mm
Max. Tilt +/-422 mm +/-450 mm +/- 411 mm +/- 450 mm +/- 550 mm +/- 550 mm
Max. Pitch +/- 5° +/- 5° +/- 5° +/- 5 ° +/- 5 ° +/- 5 °
C Max. Angle - - - +/- 28° +/- 28° +/- 28°
B Digging depth. 545 mm 539 mm 583 mm 590 mm 590 mm 590 mm
Max lift above ground 1169 mm 1165 mm 1244 mm 1130 mm 1130 mm 1130 mm
D Cast reach track coverage 393 mm 363 mm 438 mm 582 mm 472 mm 548 mm
E Cut reach track coverage 393 mm 363 mm 438 mm 154 mm 43 mm 119 mm

22
 SPECIFICATIONS

2050M GENERAL DIMENSIONS

C

G J
K

H A

B D
F
I
Line drawings are for illustrative purpose only and may not be exact representation of unit.

LT XLT WT LGP
(Long Track) (Extra Long Track) (Wide Track) (Low Ground Pressure)
TRACKS
Track gauge 1940 mm 1940 mm 2260 mm 2260 mm
Max shoe width 610 mm 610 mm 762 mm 914 mm
F Track on ground 2645 mm 3277 mm 3277 mm 3277 mm
Area of track on ground 3.22 m2 4.65 m2 4.99 m2 5.99 m2
Ground pressure 0.62 kg/cm2* 0.44 kg/cm2** 0.42 kg/cm2*** 0.36 kg/cm2 ****
DIMENSIONS
G Height to top of cab 3103 mm 3103 mm 3103 mm 3103 mm
H Ground clearance 325 mm 325 mm 325 mm 325 mm
I Length
5491 mm PAT 5902 mm PAT
5902 mm PAT 5902 mm PAT
- Blade straight with drawbar 5387 mm Straight 5387 mm Straight
5894 mm Straight 5894 mm Straight
Semi-U Semi-U

6974 mm PAT 7383 mm PAT

7383 mm PAT 7383 mm PAT
- Blade straight with ripper 6869 mm Straight 6869 Straight
6982 mm Straight 6982 mm Straight
Semi -U Semi-U
Width
3606 mm PAT 3606 mm PAT 4064 mm PAT 4064 mm PAT
- Blade straight 3334 mm Straight 3334 mm Straight PAT Foldable PAT Foldable
3426 mm Semi-U 3426 mm Semi-U 3901 mm Straight 3901 mm Straight
3690 mm PAT 3690 mm PAT
J Blade angled 3287 mm PAT 3287 mm PAT
3023 mm PAT Foldable 3023 mm PAT Foldable
2549 mm with 2549 mm with 3022 mm with 3175 mm with
K Over track
610 mm shoes 610 mm shoes 762 mm shoes 914 mm shoes

* with 610 mm shoes and PAT blade

** with 711 mm shoes and PAT blade
*** with 762 mm shoes and PAT blade
**** with 914 mm shoes and PAT blade
NOTE: Ground clearance and overall height dimensions are with the grousers fully penetrated. Add 52.5 mm if unit is on solid surface.
23
www.casece.com
EXPERTS FOR THE REAL WORLD
SINCE 1842

Form No. AME5901CCGB - Printed in Italy - MediaCross Firenze - 06/15

CASE CONSTRUCTION EQUIPMENT
CONTACT INFORMATION

CNH INDUSTRIAL - TORINO CNH INDUSTRIAL - LUGANO CNH INDUSTRIAL - MIDDLE EAST CNH INDUSTRIAL - SOUTH AFRICA
Via Plava 80 Riva Paradiso 14 DAFZA – Dubai Airport Free Zone Waterfall Business Park
10135 Torino 6902 Paradiso - Lugano West Wing 4 B, Office 642 Bekker Street, Howick Close
Italy Switzerland P.O. Box 54588, Dubai, 1685 Midrand - Johannesburg
United Arab Emirates Republic of South Africa