LOT 1 ANNEXURE-1

CR&DI Machinery and Equipment

Sr. Item Origin Equipment Description Req. Qty.

1 Digital Universal American/European/ Capacity: 20kN, 50 mm full scale analog dial indicator, 250 bar 1
Testing Machine Equivalent pressure transducer, 50 mm travel displacement transducer, 8-
channel digital indicator.

Weight Machine 300 Kg

2 Digital Universal American/European/ Can Perform tensile, compression, bending tests as per GB T 288- 1
Testing Machine China, Thailand, 2010. Capacity: 300kN. Test Round Samples up to diameter 32mm,
Singapore, Malaysia flat sample thickness up to 15mm. Accuracy Level: 0.5 grade.
and Taiwan Displacement Resolution: 0.01mm. Adjustable range of constant
/Equivalent displacement: 0.5mm/min to 50mm/min. Test Rate Control
Accuracy: +/- 2% of set value. High-precision amplifier and 24-bit
high-precision A/D converter. PID control strategy to achieve load,
displacement and deformation control. Can automatically calculate
maximum force, tensile strength, yield strength, non-proportional
extension strength, elastic modulus, elongation in specified area.
Extensometer gauge length: 25, 50, 100 mm, measuring range: 2-
25mm. Real time display of test curve. PC connection through
Ethernet.
3 Mercury Intrusion American /European Utilized for the evaluation of porosity, pore size distribution, and 1
Porosimetry (MIP) /Chinese /Equivalent pore volume (among others) to characterize a wide variety of
solid and powder materials.

4 Rapid Chloride on American/European/ Rapid Chloride Permeability Test Equipment (RCPT) is used to 1
Permeability Equivalent evaluate the resistance of a concrete sample to the penetration of
Testing Machine chloride ions. Test is performed by placing a 100 mm diameter
concrete cylinder into the sample cells that contain 3.0 % salt
solution and 0.3N sodium hydroxide solution.
Applied voltage (ASTM C1202 test): 60+/- 0.1 V.
Range of current measurement: 0 - 500 mA +/- 0.1, +/-0.2%.
Temperature measurement range: 0 – 100, +/- 1°C. Operating
temperature: 15°C - 45°C. Operating humidity: 30% - 80%.
Measurement channel: 4. Short circuit protection system: Yes.
Measurement display on LCD: Yes. Remaining time display on
LCD: Yes. LCD display area: 65 x 33 mm. Concrete ability to
resist chloride ion penetration (ASTM C1202, AASHTO T277).
The METER is supplied complete with VACUUM PUMP +
DESSICATOR and accessories to saturate the specimen with
water.
ASTM C1202, ASTM C1760 | AASHTO T277

5 Corrosion American/European/ A simple method for identifying areas of probable rebar corrosion 1
Measurement/ Equivalent in concrete structures. Detachable electrode extension pieces (41
Detectors cm long), facilitate measurements in hard-to-reach locations.
Instruments High impedance digital meter is designed for tough field
conditions. Reference electrode, including copper sulphate
reservoir. Easy to use, supplied complete.
Electrochemical Impedance Spectrometer to Measure the
Corrosion in Reinforcements
 ASTM C876 | BS 1881:201 | UNI 9535

6 Particle Size American /European Particle Size Analyzer set the standard for delivering rapid, 1
Analyzer for Micro /Chinese /Equivalent accurate particle size distributions for both wet and dry
Particles dispersions. From assessing product uniformity and solubility,
through to optimizing packing density to improve final product
performance and controlling powder flowability to increase
manufacturing efficiency, particle size analysis is critical to
understanding and controlling a wide range of properties.
Automated laser diffraction particle size analyzer designed for
industrial quality control. Principle: laser diffraction technology.
Measurement: particle size. Particle size range: 0.1 to 1000 µm.
Dispersion type: wet. Analysis: mie scattering theory and
fraunhofer diffraction theory. Detector: 86 high-speed
photodetectors (forward, lateral and backward arrangements).
Measuring angle: 0.031-159°. Feeding mode: automatic wet
circulation. Circulation speed: 300 - 2500 r/min. Circulation flow
rate: 3,000 - 8,000 ml/min. Laser: High-power fiber
semiconductor laser (10 mW/635 nm). Comes with software.
Conformity: 21 CFR Part 11, ISO 13320, CE.

7 i. Rheometer American/European/ A rheometer is a laboratory device used to measure the way in

Meter Equivalent which a liquid, suspension or slurry flows in response to applied
ii. Visco Meter forces. The application of rheology models based on the main
rheological parameters such as viscosity, shear stress, and
for Fresh State
thixotropy can provide the ability to predict the properties of
Properties of designed concrete with relatively high accuracy.
Concrete
System meets standards and test methods such as AASHTO T315,
AASHTO T316, AASHTO T350, AASHTO TP70, AASHTO
TP101, AASHTO TP123, AASHTO TP126, AASHTO M320,
AASHTO M332, ASTM D6373, ASTM D7175, ASTM D7405,
ASTM D7552, ASTM D8198, ASTM D4402, EN 13302, EN
13307, EN 14770, EN 16659, FGSV 720, FGSV 721, FGSV 722,
FGSV 723. Asphalt system to meet requirements for quality control
testing. Motor control: electronically commutated (EC), drag cup
motor control providing absolute direct: shear strain, shear rate,
shear stress for operation in steady, dynamic and transient loading
modes. Torque range - viscometry (rate and stress control): 100
nNm - 150 mNm. Torque range - oscillation (strain and stress
control): 100 nNm - 150 mNm. Torque resolution: 0.1 nNm.
Position resolution: <10 nrad. Angular velocity range: 10 nrads-1 to
200 rads-1. Step change in strain: <10 ms. Frequency range: 6.28
μrads-1 to 628 rads-1(1 μHz to 100 Hz). Motor inertia: 12 μN.m.s2.
Normal force range: 0.01 N - 20 N. Normal force resolution: 0.5
mN. Normal force response time: <10 ms. Vertical lift speed: 0.1
μms-1 to 20 mms-1. Vertical lift range (measurable): 230 mm. Gap
resolution (over full vertical lift range): 0.1 μm. Fully configurable
vertical profiles: by speed and by normal force. Raw instrument
variables: 5 kHz constant streaming data. Complete sample history:
data available from loading to unloading as standard. Instrument
interface: USB2 – plug and play. Weight: 47 kg. Software:
sequence-driven user interface enabling standard operating
procedure (SOP) type test functionality and fully customizable test
designs. Environmental controller with active hood: -5°C to 150°C
(upgradable to -40°C to 150°C in future with optional accessories).
Heat exchanger: designed specifically to work with plate and
cylinder cartridges for maximum thermal efficiency and direct
control via the instrument. Upper plate Ø 8 mm and 25 mm. Lower
plate pedestal Ø 8 mm and 25 mm. Silicone rubber sample mould
set: 1 x 8 mm and 1 x 25 mm. High temperature standard canon oil.
Asphalt trim tool. Compatible PC. Compatible air compressor (ISO
 8573.1 quality class 121); pressure: at least 5 bar, volume flow at 5
bar: 165 liters/min. Optional kits available are crumb rubber kit and
fully automated temperature calibration kit (NIST traceable).

8 Calorimeter for American/European/ Used to determine the heat of hydration of low heat Portland and 1
Heat of Hydration Equivalent hydraulic cement by measuring the heat of solution of the dry
Measurement of cement and the heat of solution of a separate portion of the
Cement cement that has been partially hydrated for 7 and for 28 days.
The apparatus consists of a Dewar flask contained in an insulated
material and housed in a wooden box which is hinged so that the
flask can be easily removed or replaced. A second hinged
wooden box contains the first one, granting a better insulation, as
expressly requested by the a.m. Standards. The Calorimeter is
supplied complete with a constant speed electric stirrer, and filler
glass funnel. DIGITAL THERMOMETER. Resolution: 0.01 °C.
PROPELLER, conforming to ASTM C186 Specifications.
PROPELLER, conforming to EN 196-8 Specifications.
PARAFFIN WAX, pack of 5000 g.

EN 196-8 / ASTM C186

9 X-Ray American /European 3 kW x-ray generator, 60 kV, high frequency, air cooled, stability 1
Diffractometer /Chinese /Equivalent .005% for full rated mains variation, ripple 0.03% to 0.75%.
(XRD) Temp. coeff. 50 ppm/deg. C. Goniometer, 2 independent axes,
radius 180-250 mm, 0.002 deg minimum step size, <0.0001 deg
resolution. Range –12 to +160 2Theta depending on accessories.
Detector arm with a curved graphite monochromator and Xe
proportional detector. Tube shield with shutter under software
control. XRD tube (Cu) and HT cable. Water is needed for tube
cooling only and requirement is 4 liter/min at 15–20C. Cabinets
are in vertical configuration 1100 mm wide x 700 mm deep x 900
mm high. The beam-path is surrounded by 2 mm steel and 12
mm Pb-Acrylic (0.5 mm Pb-equivalent). Elsewhere 2 mm
aluminum is used for reduced weight and portability. An optional
floor-standing cabinet is available (not included). An integrated
fail-safe x-rays-on warning lamp is included. Microprocessor
controller with counting electronics is included. Scan speeds 0.14
deg/min to 100 deg/min., with multi-pass averaging, scan speeds
1000 x slower. Slew speed 300 deg/min. Software – Visual XRD
and Tracesv6 included – 32 bit software for Microsoft Windows
operating system. Visual XRD software: 32 bit application for
operation of the EMMA and collection of data files for analysis
by Tracesv6 or other applications. Simple routine operation enter
start, end angles, step size, scan speed, somment and click start
button. File save and recall parameter sets. Software
configuration for user folder, screen options. Hardware
configuration for tube anode selection and communications.
Accessory configuration to select interchangeable options, source,
optic, stage, detector, which each have their own calibration
angles. Manual control for computer-aided alignment, move axes
anywhere, load sample open/close shutter, start/stop spinner –
depending on options installed. Pulse height analysis used with
Xe proportional detector, does a PHA scan, set lower and upper
discriminator, amp. gain, detector HV. Data collection modes –
single pass, multi pass, multi range, Theta/2Theta, Theta only,
2Theta only, continuous scan, residual stress. Capable of
detecting concrete defects as small as 50 mm.

XRD match software with crystallography open database – single

 license. Standard accessories kit with sample holders, slits and
alignment tools. Water circulator unit: Nominal cooling capacity:
2,600 W (25°C). Output temperature range: 5 ~ 35°C.
Temperature accuracy: ± 0.1°C. Tank size: 26 liters. Output
pressure: 0.57 MPa. Output flow: 6 l/min. Filtration: 10 μm.
Noise: 45 dB. Power: 220/240V, 50Hz. Tool buttons with tool
tips & menus make the software very user-friendly. Zooming,
scrolling and on-screen graphical peak labeling. 16 million
colours with graphical selection. Work with up to 50 scans on
screen at once. 3D graphics – perspective, trend lines, surface,
tape, area, rotation, colour, printing. Attribute-based file finder
for multi user environments. Automatic and manual background
fit & strip (fitting cubic or linear functions). Automatic peak
search and edit.
10 Fluorescene American /European Fluorescence spectrometer is an essential instrument in various 1
Spectroscopy /Chinese /Equivalent qualitative and quantitative analyses. Multifunction. Integrating
Machine wide variety of spectral techniques. Superior performance.
High sensitivity, accuracy and speed. Intuitive operation software.
Smooth, user-friendly and flexible. Unique wavelength indication.
Excellent signal-to-noise ratio / 1200:1 (RMS) / 15000:1 (RMS
(BG)). 150W xenon flash lamp. Adjustable resolution. Wavelength
range: 200 - 900 nm. Wavelength accuracy: +/- 2 nm.
Photomultiplier tube detector with extended wavelength range (up
to 900 nm). Rapid scanning rate (30,000 nm/min). Scan interval:
0.2 - 10 nm. Fluorescence value range: 0 to 70,000. Seamless
design of aluminum cast base chassis. Control software. Standard
liquid cell holder with fluorescence cuvette. Polarizer cell holder.
Micro powder sample holder. Variable angle powder sample
holder. High-temperature sample holder (up to 300℃).

Fluorescence spectroscopy is a spectroscopy method used to

analyze the fluorescence properties of a sample by determining the
 concentration of an analyte in a sample. This technique is widely
used for measuring compounds in a solution, and it is a relatively
easy method to perform.
11 Thermal American Differential Thermal Analyzer for Thermal Analysis of 1
Gravimetric /European/Equivalent Construction Materials. System with standard Fe-Cr furnace
Analyzer system (1100°C), contains a top-loading, vertical and unique
differential mechanical balance arrangement for STA
measurements. The tailor–made differential balance system
cancels buoyancy and convection influence under a broad
temperature range. This provides easy operation without the need
for time-consuming baseline runs. The balance chamber has a
vacuum tight structure (10E-4 mbar, 10E-2 Pa). This package
combines a standard furnace (Fe-Cr furnace) for measurement up
to 1100°C, high resolution balance system (digital resolution 0.03
ug, weighing range +- 250 mg), high temperature slip-on DTA
sample holder
(1600°C Type-S), base unit including all electronics, single
furnace hoist, built-in mass flow controllers (MFCs), power unit
and software. Temperature range: RT to 1100°C. Heating rate:
0.001 to 100 K/min (depending on the furnace). Temperature
precision (repeatability): 0.3 K. Motorized furnace hoist: single
hoist. Differential balance system: weighing range: ± 250 mg,
maximum sample load 1 g. Thermo-gravimetric resolution: 0.03
μg. Thermocouple: type S. Automatic sample changer: optionally
available for 20 crucibles. Package contains: standard Fe-Cr
furnace measurement temperature range is ambient to 1100°C,
maximum heating rate is up to 100 K/min. Standard slip-on
sample holder made by alumina can be used for sample crucible
of outer diameter less than 5.2 mm. MFCs; 2 connections for
purge gas inlet to the sample and 1 connection for protective gas
inlet, MFC gas control block for 3 gases, flow rate (0) ... 5 ... to
250 ml/min with a resolution of 1 ml/min with N2 for software-
programmed control and registration of the gas flows. Calibration
sample kit with 5 substances (Indium, Tin, Zinc, Aluminum,
 Gold) for temperature calibration. Temperature range ambient ...
1100°C, in wooden case with foam lining for use in Al2O3
crucibles. Calibration weights (10 mg, 50 mg, 100 mg).
Measurement and analysis software for system for data
acquisition, storage and evaluation under MS WINDOWS.
Multitasking with simultaneous operation of several thermo-
analytical systems and simultaneous evaluations. Crucible 40 µl
from Al2O3, ø 5.2 x 2.6 (h) - 2 pcs / unit. Crucible 45 µl from
Pt/Rh, ø 5.2 x 2.6 (h) - 2 pcs / unit (qty: 2).
12 Actuator for American /European Material testing often utilizes servo actuators to a pplystatic, 1
Application of /Chinese /Equivalent quasi-static or dynamic loads and controlled compressive testing
Static and Cyclic of structures and materials
Loading for
Structural
Performance of
Materials

13 Scanning Electron American /European The scanning electron microscope (SEM) uses a Focused beam of 1
Microscopy (SEM) /Chinese /Equivalent high-energy electrons to Generate a variety of signals at the
surface of solid specimens. The signals that derive from electron-
sample interactions reveal information about the sample including
external morphology (texture), chemical composition, and
crystalline structure and orientation of materials making up the
sample.
14 Concrete Moisture American Concrete moisture meter or dampness instrument that measures 1
Meter /European/Equivalent the moisture content of concrete and other building materials.
Used to measure the damp conditions in concrete structures,
masonry, gypsum, both on surface and at depth with non-
destructive method.
15 Petro Graphical American /European Contrast techniques: Bright-field: yes. POL contrast: yes. Optical 1
Instrument for /Chinese /Equivalent system: colour corrected infinity optical system (CCIS).
Petrography Observation tube: trinocular head. Trinocular light split:
100:0/20:80. Inclination: 30° inclined. Interpupillary distance:
 55-75 mm. Eyepiece(s): wide-field N-WF10X/20mm with
diopter adjustment, +/- 5 diopter. Objective classification:
infinity corrected CCIS EC plan achromatic strain-free, DIN 45
mm. Objectives magnification: 4X/0.10 (WD 15.9 mm).
10X/0.25 (WD 17.4 mm). 40X/0.65 (WD 0.5 mm). 60X/0.8 (WD
0.35 mm). Stage: 360º circular rotating stage, 1º increments, 0.1º
vernier scale and lockable. Stage size: Ø 160 mm. Upper limit
stop: preset but adjustable. Condenser: achromat swing out
condenser NA 0.90/0.13; strain-free, with iris diaphragm.
Illumination: 6V/30W halogen. Fine focus precision: 2 μm
minimum increment. Comes complete with all accessories
specially camera. Used to ascertain physic mechanical properties
of aggregates and other construction materials.

16 ASR Measurement American Alkali‐silica reaction (ASR) measurement apparatus used for 1
Apparatus /European/Equivalent determination of Alkali‐silica reaction in concrete.
ALKALINITY TEST KIT to determine the total alkalinity of
water. HARDNESS TEST KIT OF WATER, for calcium and
magnesium percentage determination. The set comprises
different reagents and graduated containers, syringe, pipette,
instructions. CHLORIDE TEST KIT OF WATER. The set
comprises different reagents, graduated containers, pipette,
syringe, instructions.

Air Content Meter American Used for detection of percentage of air in concrete. 1
17 For Concrete /European/Equivalent

18 Heavy Metals American Used for quantitatively measurement of the metals/element’s 1

Determination /European/Equivalent levels in building construction materials. TENSILE TESTS, 25
Equipment kN MAX. CAPACITY LOAD. COMPRESSION/FLEXURAL
TESTS, 50 kN MAX. CAPACITY LOAD. WITH
AUTOMATIC LOAD OR DISPLACEMENT/DEFORMATION
 CONTROL. The load is applied by a mechanical jack that is
driven by a motor brushless with closed loop through optic
encoder and controlled by a microprocessor. Stroke electric end
switches are applied to the load piston to save the machine from
accidental handlings. The control panel is placed frontally and it
is provided with a membrane having 6 multifunctional interactive
pushbuttons driven by menu, a large graphic display and RS232
port for connection to PC. TENSILE TESTS ON METALS,
PLASTICS, WIRES, TEXTILES TENSILE STRAIN load cell
25kN capacity. TENSILE HEADS (upper and lower). DEVICES
to fix the tensile heads to the frame. FLAT SEIZING GRIPS for
flat specimens 1 - 10 mm thickness by 25 mm max. width and
round specimens dia 1 - 5 mm. “V” SHAPE SEIZING GRIPS for
round specimens Dia 5 - 12 mm. SOFTWARE for visualization
in real time of load/deformation, graphic, test certificate
19 Environmental American An environmental test chamber is a system that allows a user to 1
Chamber /European/Equivalent control the environmental conditions of an enclosed space to run
controlled tests on a subject. Temperature and humidity
controlled from -30 to +70 °C and 20% to 95% respectively for
testing. Real-Time display of temperature and humidity
parameters. 1200 LITRES CAPACITY
Door with 180° opening angle, equipped magnetic gasket and
integrated heater against freezing. Shelves can be taken off and
adjustable in height; adjustable feet. Temperature and humidity
sensors wall mounted inside cabinet Visual alarm for minimum
and maximum temperature. Supplied complete with 6 adjustable
shelves. Panel mount 144×130mm format. 5" color graphic
display. 50 programs with 100 segments and real time clock.
Visual alarm for minimum and maximum temperature. PC
INTERFACE: Consist of Cables, PC interface converter and
software for editing and real-time view. MOBILE
 TEMPERATURE PROBE: Type PT100 in stainless steel bulb for
free positioning in the chamber and on the specimen.

EN 196-1, EN 1367-1, EN 12390-2, EN 12390-9

20 Mineral Identifier American Used for determining the hardness of the surface of the materials. 1
/European/Equivalen Composed by a case containing 9 minerals of the Moh’s hardness
t scale, copper strip, small glass and magnet bar. It will give full
analysis of rocks.

EN 101

21 XRF Spectrometer American /European All elements between Mg and U. SDD detector. Industrial resistive 1
/Chinese /, Thailand, touch screen with screen size of 4.3" Professional operating system
Singapore, Malaysia and software. USB, Bluetooth, wifi can connect the device to the
and Taiwan Internet, repair and setup can be done remotely. Data can be
/Equivalent exported as EXCEL or PDF. Users can customize the reports by
adding their company logos, addresses, test results, spectrum and
others (such as product description, origin and batch number).
Equipped with a dedicated T-shaped radiator to dissipate the heat
no need to wait for cooling of detector. Built-in double beam
technology can automatically sense whether there is a sample at the
measurement window. This is also a safety and protection feature.
Waterproof, dust-proof and shockproof suitcase.

22 Los Angeles American The Los Angeles abrasion machine is used to measure the 1
Abrasion Machine /European/Equivalent degradation of mineral aggregate. Used to determine the
resistance of aggregates to abrasion. It comprises a heavy steel
cylinder of 711 mm inside diameter x 508 mm inside length,
 mounted on a base frame. The cylinder rotates at a speed of
between 31 and 33 rpm. The machine is fitted with an automatic
digital counter which can be preset to the required number of
revolutions of the drum. The cylinder is counterbalanced so that
the filling opening stays in position without tilting; a push-button
allows to position such opening for the loading/ unloading
operations. The control panel can be wall fixed or placed on a
bench.

SET OF 12 ABRASIVE CHARGES, conforming to ASTM

AASHTO | CNR | UNI | UNE | NLT Standards. SET OF 12
ABRASIVE CHARGES, conforming to EN | NF Standards.

EN1097-2 | ASTM C131 | UNI 8520-19 | EN 12697-17 | EN

12697-43 | NF P18-573 | AASHTO T96 | CNR N° 34
23 Automatic Ring and American Used for determining the softening point of bituminous materials. 1
Ball Apparatus /European/Equivalent The softness of bitumen depends, amongst other factors, on the
substance temperature, the more the temperature increases, the
more increases the softness of the bitumen. The unit consists of a
pyrex beaker, brass frame, two tapered rings, two ball centering
guides and two balls. HOT PLATE: Complete with thermo-
regulator for temperature adjustment and complete with
Thermometer.

EN 1427 | ASTM D36 | AASHTO T53 | NF T66-008

24 Digital American /European/ Used to determine the consistency of lubricating greases, petroleum 10
Penetrometer Chinese/Equivalent waxes, bitumens, pastes, creams and other solid to
semi-solid products.

25 Ductilometer American The ductility test is performed for determining the ductility of 1
Apparatus /European/Equivalent bituminous materials. Used to determine the bituminous ductility,
 that is the distance to which a briquette of molten bitumen can be
extended under controlled conditions, before breaking. The
Ductilometer basically consists of a moving carriage travelling
along guide ways. The carriage is driven by an electrical motor,
inside a large tank fitted with digital thermostat, immersion
electric heater, cooling coil for cold water circulation and pump
unit. Max. traction force: 300N, accuracy: +/-0.1 N The
ductilometer can accept up to 3 specimens simultaneously.

EN 13398, EN 13589 | ASTM D113, D6084 | AASHTO T51

26 Marshall Testing American ASTM D6927, D5581, D1559 | AASHTO T245, BS 598:107 | 1
Machine /European/Equivalent NF P98-251-2

This sturdy frame, easy to use and maintain, is designed to

perfectly bear strain and loads required during the test. The plate
is raised at a constant rate of 50.8 rpm by means of an electrical
motor. Vertical span: maximum 480 mm, minimum 300 mm. The
applied load is measured by a proving ring 30 kN, supplied with
calibration certificate. An electrical device is included to stop
automatically the machine when reaching the maximum load
capacity, in order to prevent damages caused by overload. Two
safety micro-switches limit cylinder stroke while controlling
stability measuring instrument. The testing machine is fully
equipped with 30 kN load ring, mould, flow-meter with dial
gauge.

Used for measurement of resistance to plastic flow of cylindrical

specimens of bituminous paving mixture loaded on the lateral
 surface.

27 Theoretical American GAY LUSSAC TYPE, pyrex glass, complete with capillary tube 1
Maximum Specific /European/Equivalent stopper, to determine the particle density and specific gravity of
Gravity
filler in fine aggregates. Used to calculate percent air voids.

Capacity 50 ml.
Capacity 100 ml.
Capacity 250 ml.

28 Solubility of American Solubility of Bituminous Binders 1

Bituminus Binders /European/Equivalent EN 12592 | ASTM D2042
Apparatus

29 Pile tests Pile Echo American Used for checking piles integrity. 1
Tester (PET) /European/Equivalent

30 Ferro Scan American BS 1881:204 | DIN 1045 1

Detection System /European/Equivalent
Versatile, fully-integrated rebar detector and cover meter with a
unique real-time rebar display allowing the user to actually SEE
the location of the rebar beneath the concrete surface to a
maximum deep of 180 mm. This is coupled with rebar-proximity
indicators and optical and acoustical locating aids. Rebar
diameter can also be estimated within the specified testing range.
Visual indication of rebars in close proximity. Cordless and
single-handed operation. Optical and acoustical indication of
rebar location and minimum cover alert. An intuitive user
interface makes rebar detection easy. It’s a Steel detection
equipment
31 Digital System American ASTM C803 | BS 1881:207 | ACI 347 1
/European/Equivalent To evaluate the compressive strength of concrete in place with
the penetration method. Nondestructive test. It is fast, accurate
and simple to perform. The five-minute test does not weaken the
structure. Comparison between test results using this method and
destructive tests shows a variance normally within 3% from each
other. The method requires a pistol-like device which is loaded
with a small explosive charge and metal probe. The charge is
precisely measured to give a consistent firing force. By pulling
the trigger the probe is fired into the concrete. Equipment consists
of: driven unit digital measuring unit with memory for data
storage to PC unloading accessories and carrying case. SILVER
PROBES used for high performance concrete with strength up to
17000 PSI (110 MPa). Complete with probes and power loads.
Pack of 75 probe Kit. GOLDEN PROBES recommended for light
weight concrete. Complete with probes and power loads. Pack of
75 probe kit.

32 Digital Pull Off American 1

Digital Confirming to EN 1542, EN 1348, EN 1015-12, EN
Bond /European/Equivalent 13687-2, EN 13963, EN 14496, NF P18-858, BS 1881:207
standards.

Used to check the strength of bond. Measures the adhesive force

and the tensile strength of two layers of materials (concrete,
facing plasters, mortars, building plasters, lime etc). Digital pull-
off strength tester fitted with high accuracy load cell.
Load capacity: 16 kN.
Resolution: 1 N.
 Serial port for PC connection.

Accuracy and repeatability: better than ±1%. Complete with

traceable calibration certificate. Battery operated.
Drill Bit, 50 mm Diameter
Drill Bit, 20 mm Diameter

Cylindrical Ring having Truncated Cone Shape, Inside Ø 50 mm,

Standard: EN 1015-12

Adhesion Test Aluminum Disc, 50 mm Ø by 31 mm Thick (10

Pieces)
Adhesion Test Aluminum Disc, 20 mm Ø by 21 mm Thick (10
Pieces). Software Complete with Connection Cable. Acrylic
Adhesive Glue, 300 ml Cartridge, Complete with Small Pump
and Nozzles
33 Half Cell Potential American Used to detect concrete defects. 1
Corrosion Mapping /European/Equivalen
t
34 Concrete Electrical American /European Used to detect concrete defects. 1
Resistivity Meter /Chinese /Equivalent

Rapid Chloride American Gives a very quick result about presence of chlorides in 1
35
Permeability Meter /European/Equivalent construction materials.

ASTM C1202, ASTM C1760 | AASHTO T277

Applied voltage (ASTM C1202 test) 60+/- 0.1 V
Range of current measurement 0 - 500 mA +/- 0.1, +/-0.2%
Temperature measurement range 0 - 100 +/- 1°C Operating
temperature 15°C - 45°C. Operating humidity 30% - 80%
 Measurement channel 4 Short circuit protection system.
Measurement display on LCD. Remaining time display on LCD.
Concrete ability to resist chloride ion penetration (ASTM C1202,
AASHTO T277).

The METER is supplied complete with VACUUM PUMP +

DESSICATOR and accessories to saturate the specimen with
water
36 Ground American It will give information about ground strata. Max depth: 10 m. 1
Penetration /European/Equivalent Antenna frequency: 350 MHz Weight: 15.4 kg. Storage capacity:
Radar (GPR) 64 GB. Optional software available. Comes with 350 HS antenna
(350 MHz). Zebra L10 rugged table. Lithium-ion battery (2).
Dual-bay battery charger. Rugged 2 m Ethernet cable. Sunshade
for Zebra tablet. Quick start guide.
37 Titration American /European Non-destructive or destructive analytical technique used to 1
Equipment (XRF) /Chinese /Equivalent determine the elemental composition of materials.
Titration Apparatus
Wireless Maturity American /European Used during concrete operations and will give Strength of 4
38 Sensor /Chinese /Equivalent concrete and temperature of concrete.

LOT 1-A

CR&DI Machinery and Equipment

1 Genset (25kVA) American /European Generator capacity: 25KVA 1
/Chinese Fuel type: Diesel
/Local/Equivalent Voltage - Three Phase: 208, 220, 240, 416, 440, 460, 480V -
Switchable
Voltage Regulation: 0.5% (No Load to Full Load)
Power Factor: 0.8
Frequency: 60 hertz
Generator RPM: 1,800 rpm
Standby Output: 20kW/25kVA (Three Phase), 14kW/14kVA
(Single Phase)
Prime Output: 20kW/25kVA (Three Phase), 13kW/13kVA
(Single Phase
Number of Poles:4
Armature Connection: Star with Neutral/Zig Zag
 LOT 1-B

CR&DI Machinery and Equipment

Req.
Sr. Item Origin Equipment Description
Qty.
Cube Crushing Capacity: 2000kN. Motorized with Digital
Local/Equiv
1 Machine with Display. Supplied complete with Distance 1
alent
Digital Gauge Pieces.

Capping Plate Local/Equiv Approx. 7 ,8 kg 100mm dia. x 200mm

2 1
with Stand alent length cylinders.
Cylinder / Cube Local/Equi 9kgs or 17kgs 22kgs Dia: 200mm or
3 valent 30
Molds 300mm or 320mm

Slump Cone Local/Equi

4 valent 16 mm 600 mm length 5
Test Apparatus

Local/Equi
5 Rubber Hammer valent Dia: 38mm 5

Scoop Small & Local/Equi

6 valent 3Kg, Size:82 oz 5
Large

Temperature Local/Equi
7 valent 160, 102, 50 mm 2
Gauge Digital

Local/Equi
8 Trays valent 12" X 12" 5

Local/Equi
9 Trays valent 24" X 24" 5

Local/Equi
10 Digital Balance valent 200 g,6kgs,30kgs 1

Local/Equi Dia 20cm, height 5cm (3",2 1/2",2",

11 Sieves valent 1
11/2",1",3/4",3/8",1/2",3/16") & 1/4"

Local/Equi 40 – 8″ DIA, (#4, #8, #16, #30, #50, #

12 Sieves valent 1
100, #200)

Local/Equi
13 Sieve Shaker valent 24 kg approx. 1

Washing Sieve # Local/Equi

14 valent 151.53g, #200 (75µm) & #325 (45µm) 1
200
 Quartering Box Local/Equi
15 Coarse 800 Width: 25 mm 1
valent
Aggregate

Speedy Moisture Local/Equi

16 valent 16 chutes 1
Meter Speedy

Local/Equi
17 Moisture Meter valent 8 to 10 Kg & 20 to 25 mm 2

Local/Equi
18 Steel Hammer valent 1Kg, & 12in or 30.5cm 1

Local/Equi Gauge - 20 Size 18" X 18" X 18"

19 Digital Oven valent 1
Temperature up to 200 Degree C

Sand Local/Equi Approx. 08 kg 100 mm inner dia., 150

20 Replacement valent 2
mm deep with flange & 50 mm wide
Test Apparatus

Local/Equi
21 Wire Brush valent 250mm x 60mm, Wire length & 70 mm 2

Local/Equi
22 Measuring Tape valent 500 m 3

Measuring Local/Equi
23 Plastic Jug 5 Container 5000ml 1
valent
Liter

Cylinder With Local/Equi

24 valent 3Kg Capacity 1
Burner

Local/Equi
25 Micro meter valent 3.00 KGS 1

Measuring Local/Equi
26 valent 1000 ml 1
Plastic Flask

Measuring Local/Equi
27 valent 500 ml 1
Plastic Flask

Measuring Local/Equi
28 valent 250 ml 5
Plastic Flask

Measuring Local/Equi
29 valent 100 ml 2
Plastic Flask

Local/Equi
30 Paint Brush valent Normal Paint Brush 1
 Pycnometer Local/Equi
31 valent (500 ml) 1
Flask

Min. Max Local/Equi

32 valent 200*60*22mm 1
Thermometer

Local/Equi
33 Vernier Caliper valent Steel - 150Mm 1