Ds kt671ml

DS-K1T671 Series Face Recognition Terminal
User Manual
DS-K1T671 Series Face Recognition Terminal User Manual
Legal Information
About this Document

● This Document includes instructions for using and managing the Product. Pictures, charts,
images and all other information hereinafter are for description and explanation only.
● The information contained in the Document is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version of the Document at the
Hikvision website ( https://www.hikvision.com ). Unless otherwise agreed, Hangzhou Hikvision
Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as "Hikvision") makes no
warranties, express or implied.
● Please use the Document with the guidance and assistance of professionals trained in
supporting the Product.
About this Product

● This product can only enjoy the after-sales service support in the country or region where the
purchase is made.
● If the product you choose is a video product, please scan the following QR code to obtain the
"Initiatives on the Use of Video Products", and read it carefully.
Acknowledgment of Intellectual Property Rights

● Hikvision owns the copyrights and/or patents related to the technology embodied in the
Products described in this Document, which may include licenses obtained from third parties.
● Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part
of this Document may be excerpted, copied, translated, or modified in whole or in part by any
means without written permission.
● and other Hikvision's trademarks and logos are the properties of Hikvision in
various jurisdictions.
● Other trademarks and logos mentioned are the properties of their respective owners.
LEGAL DISCLAIMER
● TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS DOCUMENT AND THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS
IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR
i
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR

FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK.
IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR
LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
● YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
● YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY
RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
● IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
Data Protection
● To protect data, the development of Hikvision Products incorporates privacy by design
principles. For example, for Products with facial recognition features, biometrics data is stored in
your Products with encryption method; for fingerprint Products, only fingerprint template will be
saved, which is impossible to reconstruct a fingerprint image.
● As a data controller/processor, you may process personal data, including collection, storage, use,
processing, disclosure, deletion, etc. You are advised to pay attention to and comply with
applicable laws and regulations related to the protection of personal data, including without
limitation, conducting security controls to safeguard personal data, such as, implementing
reasonable administrative and physical security controls, conduct periodic reviews and the
assessments of the effectiveness of your security controls.
© Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
ii
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Indicates a hazardous situation which, if not avoided, will or could
Danger result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could

Caution result in equipment damage, data loss, performance degradation, or
unexpected results.
Provides additional information to emphasize or supplement
Note
important points of the main text.
iii
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
iv
under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive

2011/65/EU
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collection points. For more information see:
www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery to your supplier or to a designated
collection point. For more information see:www.recyclethis.info
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
v
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger
or property loss.
The precaution measure is divided into Dangers and Cautions:
Dangers: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Dangers: Follow these safeguards to prevent Cautions: Follow these precautions to prevent
serious injury or death. potential injury or material damage.
Danger:
● All the electronic operation should be strictly compliance with the electrical safety regulations,
fire prevention regulations and other related regulations in your local region.
● Please use the power adapter, which is provided by normal company. This equipment is
intended to be supplied from the Class 2 surge protected power source rated 12 VDC, 2 A.
● Do not connect several devices to one power adapter as adapter overload may cause over-heat
or fire hazard.
● Please make sure that the power has been disconnected before you wire, install or dismantle the
device.
● When the product is installed on wall or ceiling, the device shall be firmly fixed.
● If smoke, odors or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
● Do not ingest battery, Chemical Burn Hazard.
This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close
securely, stop using the product and keep it away from children. If you think batteries might have
been swallowed or placed inside any part of the body, seek immediate medical attention.
● If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the device yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
vi
Cautions:
● Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or places
subject to shock (ignorance can cause equipment damage).
● Do not place the device in extremely hot (refer to the specification of the device for the detailed
operating temperature), cold, dusty or damp locations, and do not expose it to high
electromagnetic radiation.
● The device cover for indoor use shall be kept from rain and moisture.
● Exposing the equipment to direct sun light, low ventilation or heat source such as heater or
radiator is forbidden (ignorance can cause fire danger).
● Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor at the
same time.
● Please use the provided glove when open up the device cover, avoid direct contact with the
device cover, because the acidic sweat of the fingers may erode the surface coating of the device
cover.
● Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do
not use alkaline detergents.
● Please keep all wrappers after unpack them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper. Transportation without the
original wrapper may result in damage on the device and lead to additional costs.
● Improper use or replacement of the battery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used batteries according to the instructions provided by
the battery manufacturer.
● Biometric recognition products are not completely applicable to anti-spoofing environments. If
you require a higher security level, use multiple authentication modes.
● Working temperature: 0 °C to 50 °C; Working humidity: 10% to 90% (no condensing)
● Indoor use. The device should be at least 2 meters away from the light, and at least 3 meters
away from the window.
● Version: 1.0, Issue Date: 20200519
● Outdoor use or use in environment exceeding the device temperature measurement will affect
the temperature measurement accuracy.
vii
Available Models
Product Name Model

Face Recognition Terminal DS-K1T671M
DS-K1T671MF
DS-K1T671TMW
DS-K1T671TMFW
Use only power supplies listed in the user instructions:
Model Manufacturer Standard

C2000IC12.0-24P-DE MOSO Power Supply CEE
Technology Co., Ltd.
C2000IC12.0-24P-GB MOSO Power Supply BS
Technology Co., Ltd.
KPL-040F-VI Channel Well Technology Co CEE
Ltd.
viii
Contents
Chapter 1 Overview .................................................................................................................... 1
1.1 Overview ................................................................................................................................ 1
1.2 Features ................................................................................................................................. 1
Chapter 2 Appearance ................................................................................................................ 3
Chapter 3 Installation ................................................................................................................. 5
3.1 Installation Environment ........................................................................................................ 5
3.2 Install with Gang Box ............................................................................................................. 5
3.3 Install without Gang Box ...................................................................................................... 11
Chapter 4 Wiring ...................................................................................................................... 17
4.1 Terminal Description ............................................................................................................ 17
4.2 Wire Normal Device ............................................................................................................. 20
4.3 Wire Secure Door Control Unit ............................................................................................ 21
Chapter 5 Activation ................................................................................................................. 22
5.1 Activate via Device ............................................................................................................... 22
5.2 Activate via Web Browser .................................................................................................... 24
5.3 Activate via SADP ................................................................................................................. 24
5.4 Activate Device via Client Software ...................................................................................... 26
Chapter 6 Quick Operation ....................................................................................................... 27
6.1 Select Language ................................................................................................................... 27
6.2 Set Password Change Type ................................................................................................... 29
6.3 Set Network Parameters ...................................................................................................... 31
6.4 Access to Platform ............................................................................................................... 33
6.5 Privacy Settings .................................................................................................................... 35
6.6 Set Administrator ................................................................................................................. 36
Chapter 7 Basic Operation ........................................................................................................ 39
7.1 Login .................................................................................................................................... 39
ix
7.1.1 Login by Administrator ................................................................................................ 39

7.1.2 Login by Activation Password ...................................................................................... 42
7.1.3 Forgot Password .......................................................................................................... 43
7.2 Communication Settings ...................................................................................................... 45
7.2.1 Set Wired Network Parameters .................................................................................. 45
7.2.2 Set Wi-Fi Parameters ................................................................................................... 46
7.2.3 Set RS-485 Parameters ................................................................................................ 48
7.2.4 Set Wiegand Parameters ............................................................................................. 49
7.2.5 Set ISUP Parameters .................................................................................................... 50
7.2.6 Platform Access ........................................................................................................... 52
7.3 User Management ............................................................................................................... 53
7.3.1 Add Administrator ....................................................................................................... 53
7.3.2 Add Face Picture ......................................................................................................... 54
7.3.3 Add Card ..................................................................................................................... 56
7.3.4 View Password ............................................................................................................ 57
7.3.5 Set Authentication Mode ............................................................................................ 58
7.3.6 Search and Edit User ................................................................................................... 58
7.4 Data Management ............................................................................................................... 59
7.4.1 Delete Data ................................................................................................................. 59
7.4.2 Import Data ................................................................................................................. 59
7.4.3 Export Data ................................................................................................................. 60
7.5 Identity Authentication ........................................................................................................ 60
7.5.1 Authenticate via Single Credential .............................................................................. 60
7.5.2 Authenticate via Multiple Credential .......................................................................... 61
7.6 Basic Settings ....................................................................................................................... 61
7.7 Set Biometric Parameters .................................................................................................... 63
7.8 Set Access Control Parameters ............................................................................................ 66
7.9 Time and Attendance Status Settings .................................................................................. 68
x
7.9.1 Disable Attendance Mode via Device ......................................................................... 68

7.9.2 Set Manual Attendance via Device ............................................................................. 69
7.9.3 Set Auto Attendance via Device .................................................................................. 70
7.9.4 Set Manual and Auto Attendance via Device .............................................................. 72
7.10 System Maintenance .......................................................................................................... 73
7.11 Preference Settings ............................................................................................................ 75
7.12 Video Intercom .................................................................................................................. 77
7.12.1 Call Client Software from Device ............................................................................... 78
7.12.2 Call Center from Device ............................................................................................ 78
7.12.3 Call Device from Client Software ............................................................................... 79
7.12.4 Call Room from Device .............................................................................................. 79
7.12.5 Call Mobile Client from Device .................................................................................. 80
Chapter 8 Quick Operation via Web Browser ............................................................................ 81
8.1 Select Language ................................................................................................................... 81
8.2 Time Settings ........................................................................................................................ 81
8.3 Privacy Settings .................................................................................................................... 81
8.4 Administrator Settings ......................................................................................................... 82
8.5 No.and System Network ...................................................................................................... 83
Chapter 9 Operation via Web Browser ...................................................................................... 84
9.1 Login .................................................................................................................................... 84
9.2 Forgot Password ................................................................................................................... 84
9.3 Overview .............................................................................................................................. 84
9.4 Person Management ............................................................................................................ 86
9.5 Search Event ........................................................................................................................ 89
9.6 Configuration ....................................................................................................................... 89
9.6.1 Set Local Parameters ................................................................................................... 89
9.6.2 View Device Information ............................................................................................. 89
9.6.3 Set Time ...................................................................................................................... 90
xi
9.6.4 Set DST ........................................................................................................................ 90

9.6.5 Change Administrator's Password ............................................................................... 91
9.6.6 View Device Arming/Disarming Information .............................................................. 91
9.6.7 Network Settings ......................................................................................................... 91
9.6.8 Set Video and Audio Parameters ................................................................................ 95
9.6.9 Set Image Parameters ................................................................................................. 96
9.6.10 Alarm Settings ........................................................................................................... 97
9.6.11 Access Control Settings ............................................................................................. 97
9.6.12 Video Intercom Settings .......................................................................................... 102
9.6.13 Card Settings ........................................................................................................... 104
9.6.14 Time and Attendance Status Settings ..................................................................... 105
9.6.15 Set Privacy Parameters ............................................................................................ 107
9.6.16 Set Biometric Parameters ....................................................................................... 108
9.6.17 Preference Settings ................................................................................................. 112
9.6.18 Upgrade and Maintenance ..................................................................................... 115
9.6.19 Device Debugging ................................................................................................... 117
9.6.20 Log Query ................................................................................................................ 117
9.6.21 Security Mode Settings ........................................................................................... 117
9.6.22 Certificate Management ......................................................................................... 118
Chapter 10 Other Platforms to Configure ................................................................................ 120
Appendix A. Tips for Scanning Fingerprint ............................................................................... 121
Appendix B. Tips When Collecting/Comparing Face Picture .................................................... 123
Appendix C. Tips for Installation Environment ........................................................................ 125
Appendix D. Dimension .......................................................................................................... 126
xii
Chapter 1 Overview
1.1 Overview
Face recognition terminal is a kind of access control device for face recognition, which is mainly
applied in security access control systems, such as logistic centers, airports, university campuses,
alarm centrals, dwellings, etc.
1.2 Features
Features of Normal Series

● 7-inch LCD touch screen
● 2 MP wide-angle dual-lens
● Adjusts supplement light brightness manually
● Face recognition distance: 0.3 m to 3 m
● Suggested height for face recognition: between 1.4 m and 1.9 m
● Deep learning algorithm
● 6,000 face capacity, 5,000 fingerprint capacity, and 50,000 event capacity
Note
Parts of the models support fingerprint module, refer to the actual products.
● Multiple authentication modes
● Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
● Transmits card and user data from or to the client software via TCP/IP protocol and saves the
data on the client software
● Imports pictures from the USB flash drive to the device or export pictures, events, from the
device to the USB flash drive
● Device management, log search, and parameter settings via the device
● Stand-alone operation
● Capture linkage and captured pictures saving
● Connects to one external card reader or access controller via RS-485 protocol
● Connects to external access controller or Wiegand card reader via Wiegand protocol
● Connects to secure door control unit via RS-485 protocol to avoid the door opening when the
terminal is destroyed
● Remote live view via RTSP protocol; encoding mode: H.264
● NTP, manually time synchronization, and auto synchronization
● Voice prompt
● Watchdog design and tamper function
1
Features of Advanced Series

● 7-inch LCD touch screen
● 2 MP wide-angle dual-lens
● Adjusts supplement light brightness manually
● Face recognition distance: 0.3 m to 3 m
● Suggested height for face recognition: between 1.4 m and 1.9 m
● Deep learning algorithm
● 20,000 face capacity, 5,000 fingerprint capacity, and 100,000 event capacity
Note
Parts of the models support fingerprint module, refer to the actual products.
● Multiple authentication modes
● Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
● Transmits card and user data from or to the client software via TCP/IP protocol and saves the
data on the client software
● Imports pictures from the USB flash drive to the device or export pictures, events, from the
device to the USB flash drive
● Device management, log search, and parameter settings via the device
● Stand-alone operation
● Capture linkage and captured pictures saving
● Connects to one external card reader or access controller via RS-485 protocol
● Connects to secure door control unit via RS-485 protocol to avoid the door opening when the
terminal is destroyed
● Connects to external access controller or Wiegand card reader via Wiegand protocol
● Remote live view via RTSP protocol; encoding mode: H.264
● NTP, manually time synchronization, and auto synchronization
● Voice prompt
● Watchdog design and tamper function
● Support English, Spanish (South America), Arabic, Thai, Indonesian, Russian, Vietnamese,
Portuguese (Brazil)
2
Chapter 2 Appearance
Refer to the following contents for detailed information of the face recognition terminal:
Figure 2-1 Face Recognition Terminal Diagram
Table 2-1 Description of Face Recognition Terminal

No. Name Description
1 Fingerprint Module For fingerprint recognition.
Note
Parts of models support fingerprint recognition
function.
2 Card Swiping Area Swipe card within this area.

3 Display Screen 7-inch LCD touch screen.
4 Camera Camera for recording or capturing videos or
pictures.
3
No. Name Description

5 Camera Camera for recording or capturing white light
videos or pictures.
6 White Light Supplement light for white light camera.
7 IR Light Supplement light for IR camera.
8 IR Light Supplement light for IR camera.
9 USB Interface Connect to USB flash drive.
10 TAMPER Tamper button.
11 Network Interface Connect to Ethernet.
12 SIM Card Slot Reserved
13 Debugging Port The debug terminal is used for debugging only.
14 Power Interface Connect to power supply.
15 Wiring Terminals Connect to other external devices, including RS-
485 card reader, Wiegand card reader, door
lock, alarm input, alarm output, etc.
16 PSAM Card Slot Reserved
4
Chapter 3 Installation
3.1 Installation Environment

● Avoid backlight, direct sunlight, and indirect sunlight.
● For better face recognition, there should be light source in or near the installation environment.
● Sunlight, wind, hot/cool air from air conditioner and other external factors, which may affect
temperature, will create the deviation of the temperature measurement. In order to get an
accurate result, make sure the device is applied indoors and windlessly (where is relatively
isolated from the outdoors). The working temperature should keep between 10 °C and 35 °C. If
there are no suitable environments for temperature measurement (the area faces the indoor
and connects the outdoor, the area at the door of the indoor environment, etc.), building a
temporary temperature measurement environment is suggested.
● Influence Factors of Temperature Measurement:
Wind: The wind will take the heat away, which may affect the measurement result.
Sweat: The sweat will take the heat away, which may affect the measurement result.
Air Conditioner (Cool Air): If the indoor temperature is low, the temperature may also lower than
the actual temperature, which may affect the measurement result.
Air Conditioner (Heat) or Heating: If the indoor temperature is high, the temperature may also
be higher than the actual temperature, which may affect the measurement result.
● In order to make the device work properly, you should wait for 90 min after the device is
powered on.
● For details about installation environment, see Tips for Installation Environment .
3.2 Install with Gang Box

Steps
1. According to the datum line on the mounting template, stick the mounting template on the wall
or other surface, 1.4 meters higher than the ground.
5
Figure 3-1 Mounting Template

2. Drill holes on the wall or other surface according to the mounting template and install the gang
box.
3. Use two supplied screws (4_KA4 × 22-SUS) to secure the mounting plate on the gang box.
4. Use another four supplied screws to secure the mounting plate on the wall.
6
Figure 3-2 Install Mounting Plate

5. Remove the two screws on the rear panel and remove the sheet to display the wiring terminals.
6. Route the cable through the cable hole of the mounting plate, and connect to corresponding
external devices' cables.
7. Install the sheet back to the device with the two screws.
8. Apply Silicone sealant among the cable wiring area to keep the raindrop from entering.
7
Figure 3-3 Apply Silicone Sealant

9. Optional: Insert the fingerprint module to the holes at the bottom of the main part.
Figure 3-4 Insert Fingerprint Module

10. Align the device with the mounting plate and hang the device on the mounting plate.
8
Figure 3-5 Install Device

11. Use two supplied screws (SC-M4 × 12TP10-SUS) to secure the device and the mounting plate.
9
Figure 3-6 Secure Device
Note
● The installation height here is the recommended height. You can change it according to your
actual needs.
● For easy installation, drill holes on mounting surface according to the supplied mounting
template.
12. After installation, for the proper use of the device (outdoor use), stick the protection film (parts
of models supplied) on the screen.
10
3.3 Install without Gang Box

Steps
1. According to the datum line on the mounting template, stick the mounting template on the wall
or other surface, 1.4 meters higher than the ground.
Figure 3-7 Mounting Template

2. Drill 6 holes on the wall or other surface according to Hole 1 and Hole 2 in the mounting
template.
3. Insert the screw sockets of the setscrews in the drilled holes.
11
Figure 3-8 Insert Screw Socket

4. Align the 6 holes to the mounting plate with the drilled holes.
Figure 3-9 Install Mounting Plate

5. Remove the two screws on the rear panel and remove the sheet to display the wiring terminals.
6. Route the cable through the cable hole of the mounting plate, and connect to corresponding
external devices' cables.
12
7. Install the sheet back to the device with the two screws.
8. Apply Silicone sealant among the cable wiring area to keep the raindrop from entering.
Figure 3-10 Apply Silicone Sealant

9. Insert the fingerprint module to the holes at the bottom of the main part.
13
Figure 3-11 Install Fingerprint Module

10. Align the device with the mounting plate and hang the device on the mounting plate.
14
Figure 3-12 Install Device

11. Use two supplied screws (SC-M4 × 12TP10-SUS) to secure the device and the mounting plate.
15
Figure 3-13 Secure Device
Note
● The installation height here is the recommended height. You can change it according to your
actual needs.
● For easy installation, drill holes on mounting surface according to the supplied mounting
template.
12. After installation, for the proper use of the device (outdoor use), stick the protection film (parts
of models supplied) on the screen.
16
Chapter 4 Wiring
You can connect the RS-485 terminal with the RS-485 card reader, connect the NC and COM
terminal with the door lock, connect the SENSOR terminal with the door contact, the BTN/GND
terminal with the exit button, connect the alarm output and input terminal with the alarm output/
input devices, and connect the Wiegand terminal with the Wiegand card reader or the access
controller.
If connect the WIEGAND terminal with the access controller, the face recognition terminal can
transmit the authentication information to the access controller and the access controller can
judge whether to open the door or not.
Note
● If cable size is 18 AWG, you should use a 12 V power supply. And the distance between the
power supply and the device should be no more than 20 m.
● If the cable size is 15 AWG, you should use a 12 V power supply. And the distance between the
● If the cable size is 12 AWG, you should use a 12 V power supply. And the distance between the
4.1 Terminal Description

The terminals contains power input, alarm input, alarm output, RS-485, Wiegand output, and door
lock.
The terminal's diagram is as follows:
17
Figure 4-1 Terminal Diagram

The descriptions of the terminals are as follows:
18
Table 4-1 Terminal Descriptions

Group No. Function Color Name Description
Group A A1 Power Input Red +12 V 12 VDC Power
Supply
A2 Black GND Ground
Group B B1 Alarm Input Yellow/Blue IN1 Alarm Input 1
B2 Yellow/Black GND Ground
B3 Yellow/Orange IN2 Alarm Input 2
B4 Alarm Output Yellow/Purple NC Alarm Output
Wiring
B5 Yellow/Brown COM
B6 Yellow/Red NO
Group C C1 RS-485 Yellow 485+ RS-485 Wiring
C2 Blue 485-
C3 Black GND Ground
C4 Wiegand Green W0 Wiegand
Wiring 0
C5 White W1 Wiegand
Wiring 1
C6 Brown WG_OK Wiegand
Authenticated
C7 Orange WG_ERR Wiegand
Authentication
Failed
C8 Purple BUZZER Buzzer Wiring
C9 Gray TAMPER Tampering
Alarm Wiring
Group D D1 Door Lock White/Purple NC Lock Wiring
(NC)
D2 White/Yellow COM Common
D3 White/Red NO Lock Wiring
(NO)
19
Group No. Function Color Name Description

D4 Yellow/Green SENSOR Door Contact
D5 Yellow/Gray BTN Exit Door
Wiring
4.2 Wire Normal Device

You can connect the terminal with normal peripherals.
The wiring diagram without secure door control unit is as follows.
Figure 4-2 Device Wiring
Note
● You should set the face recognition terminal's Wiegand direction to "Input" to connect to a
Wiegand card reader. If connects to an access controller, you should set the Wiegand direction to
"Output" to transmit authentication information to the access controller.
● For details about Wiegand direction settings, see Setting Wiegand Parameters in Communication
Settings.
● The suggested external power supply for door lock is 12 V, 1 A. The suggested external power
supply for the Wiegand card reader is 12 V, 1A.
● The suggested power cable's diameter: 22 AWG. The suggested other cable's diameter: 26 AWG.
● Do not wire the device to the electric supply directly.
Warning
The face recognition terminal shall adapt an external listed Class 2 power supply with surge
protected function.
20
4.3 Wire Secure Door Control Unit

You can connect the terminal with the secure door control unit.
The wiring diagram is as follows.
Figure 4-3 Secure Door Control Unit Wiring
Note
The secure door control unit should connect to an external power supply separately. The suggested
external power supply is 12V, 0.5A.
21
Chapter 5 Activation
You should activate the device before the first login. After powering on the device, the system will
switch to Device Activation page.
Activation via the device, SADP tool and the client software are supported.
The default values of the device are as follows:
● The default IP address: 192.0.0.64
● The default port No.: 8000
● The default user name: admin
5.1 Activate via Device

If the device is not activated, you can activate the device after it is powered on.
On the Activate Device page, create a password and confirm the password. Tap Activate and the
device will activated.
22
Figure 5-1 Activation Page
Caution
The password strength of the device can be automatically checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case letters, lower case letters, numbers, and special
23
characters) in order to increase the security of your product. And we recommend you change your
password regularly, especially in the high security system, changing the password monthly or
weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
Note
Characters containing admin and nimda are not supported to be set as activation password.
After activation, you should select language, set password change type, set application mode, set
network, set platform parameters, set privacy parameters, and set administrator.
5.2 Activate via Web Browser

You can activate the device via the web browser.
Steps
1. Enter the device default IP address (192.0.0.64) in the address bar of the web browser, and press
Enter.
Note
Make sure the device IP address and the computer's should be in the same IP segment.
2. Create a new password (admin password) and confirm the password.
Caution
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
Note
3. Click Activate.
4. Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the
client software.
5.3 Activate via SADP

SADP is a tool to detect, activate and modify the IP address of the device over the LAN.
24
Before You Start

● Get the SADP software from the supplied disk or the official website http://
www.hikvision.com/en/ , and install the SADP according to the prompts.

● The device and the PC that runs the SADP tool should be within the same subnet.
The following steps show how to activate a device and modify its IP address. For batch activation
and IP addresses modification, refer to User Manual of SADP for details.
Steps
1. Run the SADP software and search the online devices.
2. Find and select your device in online device list.
3. Input new password (admin password) and confirm the password.
Caution
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
Note
4. Click Activate to start activation.
Status of the device becomes Active after successful activation.

5. Modify IP address of the device.
1) Select the device.
25
2) Change the device IP address to the same subnet as your computer by either modifying the IP
address manually or checking Enable DHCP.
3) Input the admin password and click Modify to activate your IP address modification.
5.4 Activate Device via Client Software

For some devices, you are required to create the password to activate them before they can be
added to the software and work properly.
Steps
Note
This function should be supported by the device.
1. Enter the Device Management page.
2. Click on the right of Device Management and select Device.
3. Click Online Device to show the online device area.
The searched online devices are displayed in the list.
4. Check the device status (shown on Security Level column) and select an inactive device.
5. Click Activate to open the Activation dialog.
6. Create a password in the password field, and confirm the password.
Caution
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can better protect your product.
Note
7. Click OK to activate the device.
26
Chapter 6 Quick Operation
6.1 Select Language

You can select a language for the device system.
After the device activation, you can select a language for the device system.
27
Figure 6-1 Select System Language

By default, the system language is English.
28
6.2 Set Password Change Type

After activating the device, you can set the password change type as reserved email address or
security questions. Once you forgot the device password, you can change the password via the
selected change type.
Change Password via Email Address

If you need to change password via reserved email, you can enter an email address, and tap Next.
29
Figure 6-2 Password Change Page
Change via Security Questions

If you need to change password via security questions, you can tap Change to Security Questions
on the right corner. Select the security questions and enter the answers. Click Next.
30
Note
You can only select one type to change password. If you need, you can enter the web page to set
both of the changing types.
6.3 Set Network Parameters

You can set the network for the device.
Steps
Note
Parts of the device models supports wi-fi function. Refers to the actual device for details.
1. When you enter the Select Network page, tap Wired Network or Wi-Fi for your actual needs.
31
Figure 6-3 Select Network
Note
Disconnect the wired network before connecting a Wi-Fi.
2. Tap Next.
Wired Network
Note
Make sure the device has connected to a network.
32
If enable DHCP, the system will assign the IP address and other parameters automatically.
If disable DHCP, you should set the IP address, the subnet mask, and the gateway.
Note
IP address of 192.168.1.64, and 192.168.1.7 are not suggested to use.
Wi-Fi
Select a Wi-Fi and enter the Wi-Fi's password to get connected.
Or tap Add Wi-Fi and enter the Wi-Fi's name and the password to get connected.
3. Optional: Tap Skip to skip network settings.
6.4 Access to Platform

Enable the function and the device can communicate via Hik-Connect. You can add the device to
Hik-Connect mobile client and so on.
Steps
Note
Parts of the device models supports function. Refers to the actual device for details.
1. Enable Access to Hik-Connect, and set the server IP and verification code.
33
Figure 6-4 Access to Hik-Connect

2. Tap Next.
3. Optional: Tap Skip to skip the step.
4. Optional: Tap Previous to go to the previous page.
Note
If you tap Previous to return to the Wi-Fi configuration page, you need to tap the connected Wi-
Fi or connect another Wi-Fi to enter the platform page again.
34
6.5 Privacy Settings

After activation, selecting application mode, and selecting network, you should set the privacy
parameters, including the picture uploading and storage.
Select parameters according to your actual needs.
Figure 6-5 Privacy
35
Upload Captured Pic. When Auth. (Upload Captured Picture When Authenticating)
Upload the pictures captured when authenticating to the platform automatically.
Save Captured Pic. When Auth. (Save Captured Picture When Authenticating)
If you enable this function, you can save the picture when Authenticating to the device.
Save Registered Pic. (Save Registered Picture)
The registered face picture will be saved to the system if you enable the function.
Upload Pic. After Linked Capture (Upload Picture After Linked Capture)
Upload the pictures captured by linked camera to the platform automatically.
Save Pic. After Linked Capture (Save Pictures After Linked Capture)
If you enable this function, you can save the picture captured by linked camera to the device.
Tap Next to complete the settings.
6.6 Set Administrator

After device activation, you can add an administrator to manage the device parameters.
Before You Start
Activate the device and select an application mode.
Steps
1. Optional: Tap Skip to skip adding administrator if required.
2. Enter the administrator's name (optional) and tap Next.
36
Figure 6-6 Add Administrator Page

3. Select a credential to add.
Note
Up to one credential should be added.
- : Face forward at the camera. Make sure the face is in the face recognition area. Click to
capture and click to confirm.
37
- : Enter the card No. or present card on the card presenting area. Click OK.
4. Click OK.
You will enter the authentication page.
Status Icon Description
/
Device is armed/not armed.
/
Hik-Connect is enabled/disabled.
/ /
The device wired network is connected/not connected/connecting failed.
/ /
The device' Wi-Fi is enabled and connected/not connected/enabled but not connected.
Shortcut Keys Description
Note
You can configure those shortcut keys displayed on the screen. For details, see Basic Settings .
● Enter the device room No. and tap OK to call.

● Tap to call the center.
Note
The device should be added to the center, or the calling operation will be failed.
Enter password to authenticate.
38
Chapter 7 Basic Operation
7.1 Login
Login the device to set the device basic parameters.
7.1.1 Login by Administrator

If you have added an administrator for the device, only the administrator can login the device for
device operation.
Steps
1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter
the admin login page.
39
Figure 7-1 Admin Login

2. Authenticate the administrator's face or card to enter the home page.
40
Figure 7-2 Home Page
Note
The device will be locked for 30 minutes after 5 failed attempts.
3. Optional: Tap and you can enter the device activation password for login.
4. Optional: Tap and you can exit the admin login page.
41
7.1.2 Login by Activation Password

You should login the system before other device operations. If you do not configure an
administrator, you should follow the instructions below to login.
Steps
1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter
password entering page.
2. Tap the Password field and enter the device activation password.
3. Tap OK to enter the home page.
Note
The device will be locked for 30 minutes after 5 failed password attempts.
42
Figure 7-3 Home Page
7.1.3 Forgot Password

If you forget the password during authentication, you can change the password.
43
Steps
1. Hold the initial page for 3 s and slide to the left/right by following the gesture and log in the
page.
2. Optional: If you have set an administrator, tap in the pop-up admin authentication page.
Figure 7-4 Password Authentication Page

3. Tap Forgot Password.
4. Select a password change type from the list.
44
Note
If you have only set 1 password change type, you will go to the corresponded password change
page for further settings.
5. Answer the security questions or change the password according to email address.
- Security Questions: Answer the security questions that configured when activation.
- Email Address
Note
Make sure the device has added to the Hik-Connect account.
a. Download Hik-Connect app.
b. Go to More → Reset Device Password .
c. Scan the QR code on the device and a verification code will be popped up.
Note
Tap the QR code to get a larger picture.
d. Enter the verification code on the device page.
6. Create a new password and confirm it.
7. Tap OK.
7.2 Communication Settings

You can set the network parameters, the RS-485 parameters, and the Wiegand parameters on the
communication settings page.
7.2.1 Set Wired Network Parameters

You can set the device wired network parameters, including the IP address, the subnet mask, the
gateway, and DNS parameters.
Steps
1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings
page.
2. On the Communication Settings page, tap Wired Network.
45
Figure 7-5 Wired Network Settings

3. Set IP Address, Subnet Mask, and Gateway.
- Enable DHCP, and the system will assign IP address, subnet mask, and gateway automatically.
- Disable DHCP, and you should set the IP address, subnet mask, and gateway manually.
Note
● The device's IP address and the computer IP address should be in the same IP segment.
● IP address of 192.168.1.64, and 192.168.1.7 are not suggested to use.
4. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the
alternate DNS server.
7.2.2 Set Wi-Fi Parameters

You can enable the Wi-Fi function and set the Wi-Fi related parameters.
46
Steps
Note
The function should be supported by the device.
page.
2. On the Communication Settings page, tap.
Figure 7-6 Wi-Fi Settings

3. Enable the Wi-Fi function.
4. Configure the Wi-Fi parameters.
- Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK.
- If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And
tap OK.
47
Note
Only digits, letters, and special characters are allowed in the password.
5. Set the Wi-Fi's parameters.
- By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the
gateway automatically.
- If disable DHCP, you should enter the IP address, the subnet mask, and the gateway manually.
6. Tap OK to save the settings and go back to the Wi-Fi tab.
7. Tap to save the network parameters.
7.2.3 Set RS-485 Parameters

The face recognition terminal can connect external access controller, secure door control unit or
card reader via the RS-485 terminal.
Steps
page.
2. On the Communication Settings page, tap RS-485 to enter the RS-485 tab.
48
Figure 7-7 Set RS-485 Parameters

3. Select an peripheral type according to your actual needs.
Note
If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set
the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address
according to the door No.
4. Tap the back icon at the upper left corner and you should reboot the device if you change the
parameters.
7.2.4 Set Wiegand Parameters

You can set the Wiegand transmission direction.
Steps
page.
2. On the Communication Settings page, tap Wiegand to enter the Wiegand tab.
49
Figure 7-8 Wiegand Settings

3. Enable the Wiegand function.
4. Select a transmission direction.
● Output: A face recognition terminal can connect an external access controller. And the two
devices will transmit the card No. via Wiegand 26 or Wiegand 34.
● Input: A face recognition terminal can connect a Wiegand card reader.
5. Tap to save the network parameters.
Note
If you change the external device, and after you save the device parameters, the device will
reboot automatically.
7.2.5 Set ISUP Parameters

Set ISUP parameters and the device can upload data via ISUP protocol.
50
Before You Start

Make sure your device has connect to a network.
Steps
1. Tap Comm. → ISUP .
Figure 7-9 ISUP Settings

2. Enable the ISUP function and set the ISUP server parameters.
ISUP Version
Set the ISUP version according to your actual needs.
Central Group
Enable central group and the data will be uploaded to the center group.
Main Channel
Support N1 or None.
ISUP
Enable ISUP function and the data will be uploaded via ISUP protocol.
51
Address Type
Select an address type according to your actual needs.
IP Address
Set the ISUP server's IP address.
Port No.
Set the ISUP server's port No.
Note
Port No. Range: 0 to 65535.
Device ID
Set device serial no.
ISUP Key
If you choose V5.0, you should create an account and ISUP key. If you choose other version,
you should create an ISUP account only.
Note
● Remember the ISUP account and ISUP key. You should enter the account name or the key
when the device should communicate with other platforms via ISUP protocol.
● ISUP key range: 8 to 32 characters.
7.2.6 Platform Access

You can change the device verification code and set the server address before you add the device
to the Hik-Connect mobile client.
Before You Start
Make sure your device has connected to a network.
Steps
Note
Parts of the device models supports function. Refers to the actual device for details.
page.
2. On the Communication Settings page, tap Access to Hik-Connect.
3. Enable Access to Hik-Connect
4. Enter Server IP.
5. Create the Verification Code, and you need to enter the verification code when you manage the
devices via Hik-Connect.
52
7.3 User Management

On the user management interface, you can add, edit, delete and search the user.
7.3.1 Add Administrator

The administrator can login the device backend and configure the device parameters.
Steps
1. Long tap on the initial page and log in the backend.
2. Tap User → + to enter the Add User page.
3. Edit the employee ID.
Note
● The employee ID should be less than 32 characters. And it can be a combination of lower
letters, upper letters, and numbers.

● The employee ID should not be duplicated.
4. Tap the Name field and input the user name on the soft keyboard.
Note
● Numbers, upper case letters, lower case letters, and special characters are allowed in the user
name.
● Up to 32 characters are allowed in the user name.
5. Optional: Add a face picture, or cards for the administrator.
Note
● For details about adding a face picture, see Add Face Picture .
● For details about adding a card, see Add Card .
6. Optional: Set the administrator's authentication type.
Note
For details about setting the authentication type, see Set Authentication Mode .
7. Enable the Administrator Permission function.
Enable Administrator Permission
The user is the administrator. Except for the normal attendance function, the user can also
enter the Home page to operate after authenticating the permission.
8. Tap to save the settings.
53
7.3.2 Add Face Picture

Add user's face picture to the device. And the user can use the face picture to authenticate.
Steps
1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in
the backend.
3. Edit the employee ID.
Note

Note
name.
● The suggested user name should be within 32 characters.
5. Tap the Face Picture field to enter the face picture adding page.
54
Figure 7-10 Add Face Picture

6. Look at the camera.
55
Note
● Make sure your face picture is in the face picture outline when adding the face picture.
● Make sure the captured face picture is in good quality and is accurate.
● For details about the instructions of adding face pictures, see Tips When Collecting/
Comparing Face Picture .
After completely adding the face picture, a captured face picture will be displayed at the upper
right corner of the page.
7. Tap Save to save the face picture.
8. Optional: Tap Try Again and adjust your face position to add the face picture again.
9. Set the user role.
Administrator
Normal User
The User is the normal user. The user can only authenticate or take attendance on the initial
page.
7.3.3 Add Card

Add a card for the user and the user can authenticate via the added card.
Steps
the backend.
3. Connect an external card reader according to the wiring diagram.
4. Tap the Employee ID. field and edit the employee ID.
Note

Note
name.
6. Tap the Card field and tap +.
56
7. Configure the card No.

- Enter the card No. manually.
- Present the card over the card presenting area to get the card No.
Note
● The card No. cannot be empty.
● Up to 20 characters are allowed in the card No.
● The card No. cannot be duplicated.
8. Configure the card type.

Administrator
Normal User
page.
7.3.4 View Password

Add a password for the user and the user can authenticate via the password.
Steps
the backend.
3. Tap the Employee ID. field and edit the employee ID.
Note

Note
name.
5. Tap the Password to view the password.
57
Note
The password cannot be edited. It can only be applied by the platform.
Administrator
Normal User
page.
7.3.5 Set Authentication Mode

After adding the user's fingerprint, face picture, password, or other credentials, you should set the
authentication mode and the user can authenticate his/her identity via the configured
authentication mode.
Steps
the backend.
2. Tap User → Add User/Edit User → Authentication Mode .
3. Select Device or Custom as the authentication mode.
Device
If you want to select device mode, you should set the terminal authentication mode in Access
Control Settings page first. For details see Setting Access Control Parameters.
Custom
You can combine different authentication modes together according to your actual needs.
7.3.6 Search and Edit User

After adding the user, you can search the user and edit it.
Search User
On the User Management page, Tap the search area to enter the Search User page. Tap Card on
the left of the page and select a search type from the drop-down list. Enter the employee ID, card
No., or the user name for search. Tap to search.
58
Edit User
On the User Management page, select a user from the user list to enter the Edit User page. Follow
the steps in User Management to edit the user parameters. Tap to save the settings.
Note
The employee ID cannot be edited.
7.4 Data Management

You can delete data, import data, and export data.
7.4.1 Delete Data

Delete user data.
On the Home page, tap Data → Delete Data → User Data . All user data added in the device will be
deleted.
7.4.2 Import Data

Steps
1. Plug a USB flash drive in the device.
2. On the Home page, tap Data → Import Data .
3. Tap User Data or Face Data.
4. Enter the created password when you exported the data. If you do not create a password when
you exported the data, leave a blank in the input box and tap OK immediately.
Note
● If you want to transfer all user information from one device (Device A) to another (Device B),
you should export the information from Device A to the USB flash drive and then import from
the USB flash drive to Device B. In this case, you should import the user data before importing
the profile photo.
● The supported USB flash drive format is FAT32.
● The imported pictures should be saved in the folder (named enroll_pic) of the root directory
and the picture's name should be follow the rule below:
Card No._Name_Department_Employee ID_Gender.jpg
● If the folder enroll_pic cannot save all imported pictures, you can create another folders,
named enroll_pic1, enroll_pic2, enroll_pic3, enroll_pic4, under the root directory.
59
● The employee ID should be less than 32 characters. It can be a combination of lower letters,
upper letters, and numbers. It should not be duplicated, and should not start with 0.
● Requirements of face picture should follow the rules below: It should be taken in full-face
view, directly facing the camera. Do not wear a hat or head covering when taking the face
picture. The format should be JPEG or JPG. The resolution should be 640 × 480 pixel or more
than of 640 × 480 pixel. The picture size should be between 60 KB and 200 KB.
7.4.3 Export Data

Steps
1. Plug a USB flash drive in the device.
2. On the Home page, tap Data → Export Data .
3. Tap Event Data, User Data, or Face Data.
4. Optional: Create a password for exporting. When you import those data to another device, you
should enter the password.
Note
● The supported USB flash drive format is DB.
● The system supports the USB flash drive with the storage of 1G to 32G. Make sure the free
space of the USB flash drive is more than 512M.
● The exported user data is a DB file, which cannot be edited.
7.5 Identity Authentication

After network configuration, system parameters configuration and user configuration, you can go
back to the initial page for identity authentication. The system will authenticate person according
to the configured authentication mode.
You can authenticate identity via 1:1 matching or 1:N matching.
1:N Matching
Compare the captured face picture or the collected fingerprint picture with all face pictures or
all fingerprint pictures stored in the device.
1: 1 Matching
Compare the captured face picture or the collected fingerprint picture with all face pictures or
all fingerprint pictures stored in the device.
7.5.1 Authenticate via Single Credential

Set the user authentication type before authentication. For details, see Set Authentication Mode .
Authenticate face, card or QR code.
Face
60
Face forward at the camera and start authentication via face.

Card
Present the card on the card presenting area and start authentication via card.
Note
The card can be normal IC card, or encrypted card.
QR Code
Put the QR code in front of the device camera to authenticate via QR code.
Note
Authentication via QR code should be supported by the device.
If authentication completed, a prompt "Authenticated" will pop up.
7.5.2 Authenticate via Multiple Credential

Before You Start
Set the user authentication type before authentication. For details, see Set Authentication Mode .
Steps
1. If the authentication mode is Card and Face, Password and Face, Card and Password,
authenticate any credential according to the instructions on the live view page.
Note
● The card can be normal IC card, or encrypted card.
● If the QR Code Scanning function is enabled, you can put the QR code in front of the device
camera to authenticate via QR code.

2. After the previous credential is authenticated, continue authenticate other credentials.
Note
For detailed information about authenticating face, see Tips When Collecting/Comparing Face
Picture.
If authentication succeeded, the prompt "Authenticated" will pop up.
7.6 Basic Settings

You can set the voice settings, time settings, sleeping (s), language, community No., building No.,
Unit No., and beauty.
Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the
device home page. Tap Basic.
61
Figure 7-11 Basic Settings Page

Voice Settings
You can enable/disable the voice prompt function and adjust the voice volume.
Note
You can set the voice volume between 0 and 10.
Time Settings
62
Set the time zone, the device time and the DST.
Sleeping (s)
Set the device sleeping waiting time (minute). When you are on the initial page and if you set
the sleeping time to 30 min, the device will sleep after 30 min without any operation.
Note
If you set the sleeping time to 0, the device will not enter sleeping mode.
Select Language
Select the language according to actual needs.
Community No.
Set the device installed community No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
Beauty
You can enable the beauty function and set the smooth and the whiten parameter. Tap + or - to
control the effect strength.
Note
By default, the function is disabled.
7.7 Set Biometric Parameters

You can customize the face parameters to improve the face recognition performance. The
configurable parameters includes application mode, face liveness level, face recognition distance,
face recognition interval, wide dynamic, face 1:N security level, face 1:1 security level, ECO
settings, face with mask detection and hard hat detection.
Long tap on the initial page for 3 s and login the home page. Tap Biometric.
Table 7-1 Face Picture Parameters

Parameter Description
Application Mode Select either others or indoor according to actual environment.
Face Liveness Level After enabling face anti-spoofing function, you can set the matching
security level when performing live face authentication.
63
Note
After disabling face anti-spoofing function, there will be spoofing
recognition risks.
Face Recognition Set the valid distance between the user and the camera when
Distance authenticating.
Face Recognition The time interval between two continuous face recognitions when
Interval authenticating.
Note
You can input the number from 1 to 10.
Wide Dynamic It is suggested to enable the WDR function if installing the device
outdoors.
When there are both very bright and very dark areas simultaneously in
the view, you can enable the WDR function to balance the brightness of
the whole image and provide clear images with details.
Face 1:N Security Level Set the matching threshold when authenticating via 1:N matching mode.
The larger the value, the smaller the false accept rate and the larger the
false rejection rate.
Note
You are recommended to retain the default value. The adjustment will
affect the face misidentification rate and rejection rate.
Face 1:1 Security Level Set the matching threshold when authenticating via 1:1 matching mode.
The larger the value, the smaller the false accept rate and the larger the
false rejection rate.
Note
You are recommended to retain the default value. The adjustment will
affect the face misidentification rate and rejection rate.
ECO Settings After enabling the ECO mode, the device will use the IR camera to
authenticate faces in the low light or dark environment. And you can set
the ECO mode threshold, ECO mode (1:N), and ECO mode (1:1).
64
Note
After enabling ECO mode, the face will be recognized in weak light or no
light environment. After disabling ECO mode, face recognition effect will
decline in weak light or no light environment.
ECO Mode Threshold
When enabling the ECO mode, you can set the ECO mode's threshold.
The larger the value, the easier the device entering the ECO mode.
ECO Mode (1:1)
Set the matching threshold when authenticating via ECO mode 1:1
matching mode. The larger the value, the smaller the false accept rate
and the larger the false rejection rate.
ECO Mode (1:N)
Set the matching threshold when authenticating via ECO mode 1:N
matching mode. The larger the value, the smaller the false accept rate
and the larger the false rejection rate
Face with Mask & Face(1:N ECO)
Set the matching value when authenticating with face mask via ECO
mode 1:N matching mode. The larger the value, the smaller the false
accept rate and the larger the false rejection rate.
Face with Mask After enabling the face with mask detection, the system will recognize
Detection the captured face with mask picture. You can set face with mask & face
1:N level and the strategy.
Note
After enabling Face with Mask Detection function, recognition effect of
people without mask will be influenced.
Reminder of Wearing
If the person do not wear a face mask when authenticating, the
device prompts a notification and the door will open.
Must Wear
device prompts a notification and the door keeps closed.
None
65
device will not prompt a notification.
Hard Hat Detection After enabling the hard hat detection, you can set the strategy.
Reminder of Wearing
If the person do not wear the hard hat when authenticating, the
device will pop up a prompt and the door will open.
Must Wear
If the person do not wear the hard hat when authenticating, the
device will pop up a prompt and the door will keep closed.
None
device will not prompt a notification.
7.8 Set Access Control Parameters

You can set the access control permissions, including the functions of authentication mode, enable
NFC card, door contact, and door open time.
On the Home page, tap ACS (Access Control Settings) to enter the Access Control Settings page.
Edit the access control parameters on this page.
66
Figure 7-12 Access Control Parameters

The available parameters descriptions are as follows:
Table 7-2 Access Control Parameters Descriptions

Terminal Auth. Mode (Terminal Select the face recognition terminal's authentication mode. You
Authentication Mode) can also customize the authentication mode.
Note
● Biometric recognition products are not completely applicable
to anti-spoofing environments. If you require a higher
security level, use multiple authentication modes.
● If you adopt multiple authentication modes, you should
authenticate other methods before authenticating face.
Reader Auth. Mode (Card Select the card reader's authentication mode.
Reader Authentication Mode)
Enable NFC Card Enable the function and you can present the NFC card to
authenticate. In order to prevent the mobile phone from getting
the data of the access control, you can disable NFC card to
increase the security level of the data.
67
Note
Disable NFC card cannot completely avoid presenting NFC card.
Door Contact You can select "Open (Remain Open)" or "Close (Remian
Closed)" according to your actual needs. By default, it is Close
(Remian Closed).
Open Duration Set the door unlocking duration. If the door is not opened for
the set time, the door will be locked. Available door locked time
range: 1 to 255s.
Authentication Interval Set the device authenticating interval. Available authentication
interval range: 0 to 65535.
7.9 Time and Attendance Status Settings

You can set the attendance mode as check in, check out, break out, break in, overtime in, and
overtime out according to your actual situation.
Note
The function should be used cooperatively with time and attendance function on the client
software.
7.9.1 Disable Attendance Mode via Device

Disable the attendance mode and the system will not display the attendance status on the initial
page.
Tap T&A Status to enter the T&A Status page.
68
Figure 7-13 Disable Attendance Mode

Set the Attendance Mode as Disable.
You will not view or configure the attendance status on the initial page. And the system will follow
the attendance rule that configured on the platform.
7.9.2 Set Manual Attendance via Device

Set the attendance mode as manual, and you should select a status manually when you take
attendance.
Before You Start
Add at least one user, and set the user's authentication mode. For details, see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Attendance Mode as Manual.
69
Figure 7-14 Manual Attendance Mode

3. Enable the Attendance Status Required.
4. Enable a group of attendance status.
Note
The Attendance Property will not be changed.
5. Optional: Select an status and change its name if required.
The name will be displayed on the T & A Status page and the authentication result page.
Result
You should select an attendance status manually after authentication.
Note
If you do not select a status, the authentication will be failed and it will not be marked as a valid
attendance.
7.9.3 Set Auto Attendance via Device

Set the attendance mode as auto, and you can set the attendance status and its available schedule.
The system will automatically change the attendance status according to the configured schedule.
70
Before You Start

Steps
2. Set the Attendance Mode as Auto.
Figure 7-15 Auto Attendance Mode

3. Enable the Attendance Status function.
Note
6. Set the status' schedule.
1) Tap Attendance Schedule.
2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday.
3) Set the selected attendance status's start time of the day.
4) Tap Confirm.
5) Repeat step 1 to 4 according to your actual needs.
Note
The attendance status will be valid within the configured schedule.
71
Result
When you authenticate on the initial page, the authentication will be marked as the configured
attendance status according to the configured schedule.
Example
If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's
authentication from Monday 11:00 to 12:00 will be marked as break.
7.9.4 Set Manual and Auto Attendance via Device

Set the attendance mode as Manual and Auto, and the system will automatically change the
attendance status according to the configured schedule. At the same time you can manually
change the attendance status after the authentication.
Before You Start
Steps
2. Set the Attendance Mode as Manual and Auto.
Figure 7-16 Manual and Auto Mode

72
Note
6. Set the status' schedule.
1) Tap Attendance Schedule.
2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday.
3) Set the selected attendance status's start time of the day.
4) Tap OK.
5) Repeat step 1 to 4 according to your actual needs.
Note
The attendance status will be valid within the configured schedule.
Result
On the initial page and authenticate. The authentication will be marked as the configured
attendance status according to the schedule. If you tap the edit icon on the result tab, you can
select a status to take attendance manually, the authentication will be marked as the edited
attendance status.
Example
7.10 System Maintenance

You can view the system information and the capacity. You can also upgrade the device, restore to
factory settings, restore to default settings, reboot the device, set face parameters and view
version information.
Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the
home page. Tap Maint.
Hold the ? on the upper-right corner of the page and enter the password to view the version of the
device.
73
System Information
You can view the device model, serial No., versions, address, production data, QR code, and
open source code license.
Note
The page may vary according to different device models. Refers to the actual page for details.
Capacity
You can view the number of, user, face picture, card, and event.
Device Upgrade
Online Update
If the device has been connected to Hik-Connect and network, when there is a new
installation package in Hik-Connect, you can tap Device Upgrade → Online Update to
upgrade the device system.
Update via USB
74
Plug the USB flash drive in the device USB interface. Tap Device Upgrade → Update via USB ,
and the device will read the digicap.dav file in the USB flash drive to start upgrading.
Unlink APP Account
After unlinking APP account, you cannot operate via APP.
Restore to Default Settings
All parameters, except for the communication settings, remotely imported user information, will
be restored to the default settings. The system will reboot to take effect.
Restore to Factory Settings
All parameters will be restored to the factory settings. The system will reboot to take effect.
Reboot
Reboot the device.
Advanced Settings
Long Tap ? on the right corner to enter the advanced settings page. Enter the password.
Face Parameter
Custom Anti-Spoofing Detection
Face Liveness Level
After enabling face anti-spoofing function, you can set the matching security level
when performing live face authentication.
Anti-Spoofing Detection Threshold
The larger the value, the smaller the false accept rate and the larger the false rejection
rate. The smaller the value, the larger the false accept rate and the smaller the false
rejection rate.
Lock Face for Anti-Spoofing Protection
After enabling this function, the device will lock automatically when anti-spoofing
detection failed.
Lock Duration
The lock duration after enabling Lock Face for Anti-Spoofing Protection when anti-
spoofing detection failed.
Version Information
You can view the device information.
7.11 Preference Settings

You can configure preference settings parameters.
Steps
1. Tap Basic Settings → Preference to enter the preference settings page.
75
Figure 7-17 Preference Settings

Shortcut Key
Choose the shortcut key that displayed on the authentication page, including the call
function, call type, and the password entering function.
Note
You can select call type from Call Room, Call Center, Call Specified Room No. and Call APP.
76
Call Room
When you tap the call button on the authentication page, you should dial a room No. to
call.
Call Center
When you tap the call button on the authentication page, you can call the center directly.
Call Specified Room No.
You should set a room No. When you tap the call button on the authentication page, you
can call the configured room directly without dialing.
Call APP
When you tap the call button on the authentication page, you will call the mobile client
where the device is added.
Password
Enable this function amd you can enter the password to authenticate via password.
Theme
You can set the theme of the prompt window on the authentication page. You can select
Theme as Default, Simple, or Advertisement.
Default
The device authentication page will display the live view page. And the person's name,
employee ID, face pictures will all be displayed after authentication.
Simple
After selecting this mode, the live view of the authentication page will be disabled, and in
the meanwhile, the person's name, employee ID, face pictures will all be hidden after
authentication.
Advertisement
After selecting this mode, the advertising area and identification authentication area of
the device will be displayed on separate screens. Video and advertising information
playback, welcome speech display are supported.
7.12 Video Intercom

After adding the device to the client software, you can call the device from the client software, call
the main station from the device, call the client software from the device, call the indoor station
from the device, or call the specific room from the device.
77
7.12.1 Call Client Software from Device

Steps
1. Get the client software from the supplied disk or the official website, and install the software
according to the prompts.
2. Run the client software and the control panel of the software pops up.
3. Click Device Management to enter the Device Management interface.
4. Add the device to the client software.
Note
For details about adding device, see Add Device.
5. Call the client software.
1) Tap on the device initial page.
2) Enter 0 in the pop-up window.
3) Tap to call the client software.
6. Tap Answer on the pop-up page of the client software and you can start two-way audio between
the device and the client software.
Note
If the device is added to multiple client softwares and when the device is calling the client
software, only the first client software added the device will pop up the call receiving window.
7.12.2 Call Center from Device

Steps
4. Add the main station and the device to the client software.
Note
5. Set the main station's IP address and SIP address in the remote configuration page.
Note
For details about the operation, see the user manual of the main station.
6. Call the center.
- If you have configured to call center in the Basic Settings , you can tap to call the center.
- If you have not configured to call center in the Basic Settings , you should tap → to call
the center
7. Answers the call via the main station and starts two-way audio.
78
Note
The device will call the main station in priority.
7.12.3 Call Device from Client Software

Steps
3. Click Device Management to enter the Device Management page.
4. Add the device to the client software.
Note
5. Enter the Live View page and double-click the added device to start live view.
Note
For details about operations in the Live View page, see Live View in the user manual of the client
software.
6. Right click the live view image to open the right-click menu.
7. Click Start Two-Way Audio to start two-way audio between the device and the client software.
7.12.4 Call Room from Device

Steps
4. Add the indoor station and the device to the client software.
Note
5. Link a user to an indoor station and set a room No. for the indoor station.
6. Call the room.
- If you have configured a specified room No. in the Basic Settings , you can tap to call the
room.
- If you have not configured a specified room No. in the Basic Settings , you should tap on
the authentication page of the device. Enter the room No. on the dial page and tap to call
the room.
7. After the indoor station answers the call, you can start two-way audio with the indoor station.
79
7.12.5 Call Mobile Client from Device

Steps
1. Get the mobile mobile client from the supplied disk or the official website, and install the
software according to the prompts.
2. Run the mobile client and add the device to the mobile client.
Note
For details, see the user manual of the mobile client.
3. Enter Basic Settings → Shortcut Key and enable Call APP.
4. Go back to the initial page and call the mobile client.
1) Tap on the device initial page.
2) Tap to call the mobile client.
80
Chapter 8 Quick Operation via Web Browser
8.1 Select Language

You can select a language for the device system.
Click in the top right of the web page to enter the Device Language Settings page. You can
select a language for the device system from the drop-down list.
By default, the system language is English.
Note
After you change the system language, the device will reboot automatically.
8.2 Time Settings

Click in the top right of the web page to enter the wizard page. After setting device language,
you can click Next to enter the Time Settings page.
Time Zone
Select the device located time zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device time should be synchronized manually. You can set the device time
manually or check Sync. with Computer Time to synchronize the device time with the
computer's time.
Server Address/NTP Port/Interval
You can set the server address, NTP port, and interval.
Click Next to save the settings and go to the next parameter. Or click Skip to skip time settings.
8.3 Privacy Settings

Set the picture uploading and storage parameters.
Click in the top right of the web page to enter the wizard page. After previous settings, you can
click Next to enter the Privacy Settings page.
81
Picture Uploading and Storage

Save Picture When Authenticating
Save picture when authenticating automatically.
Upload Picture When Authenticating
Upload the pictures when authenticating to the platform automatically.
Save Registered Picture
Upload Picture After Linked Capture
Save Pictures After Linked Capture
Click Next to complete the settings.
8.4 Administrator Settings

Steps
1. Click in the top right of the web page to enter the wizard page. After setting device language,
time, environment and privacy, you can click Next to enter the Administrator Settings page.
2. Enter the employee ID and name of the administrator.
3. Select a credential to add.
Note
You should select at least one credential.
1) Click Add Face to upload a face picture from local storage.
Note
The uploaded picture should be within 200 K, in JPG、JPEG、PNG format.
2) Click Add Card to enter the Card No. and select the property of the card.
Note
Up to 5 cards can be supported.
3) Click Add Fingerprint to add fingerprints.
Note
Up to 10 fingerprints are allowed.
Click Complete to complete the settings.
82
8.5 No.and System Network

Steps
1. Click in the top right of the web page to enter the wizard page. After previous settings, you
can click Next to enter the No. and System Network settings page.
2. Set the device type.
If set the device type as Door Station or Access Control Device, you can set the floor No., door
station No., and click More to set Community No., Building No., and Unit No.
If set the device type as Outer Door Station, you can set outer door station No., and community
No.
3. Click Complete to save the settings after the configuration.
Device Type
The device can be used as a door station or outer door station. Select a device type from the
drop-down list.
Floor No.
Set the device installed floor No.
Door Station No.
Note
The main door station No. is 0, and the sub door station No. ranges from 1 to 16.
Community No.
Set the device community No.
Building No.
Set the device building No.
Unit No.
Set the device unit No.
83
Chapter 9 Operation via Web Browser
9.1 Login
You can login via the web browser.
Note
Make sure the device is activated. For detailed information about activation, see Activation .
Login via Web Browser

Enter the device IP address in the address bar of the web browser and press Enter to enter the
login page.
Enter the device user name and the password. Click Login.
9.2 Forgot Password

If you forget the device password, you can change the device password via security questions.
Steps
Note
You can change the device password via PC web.
1. ClickForgot Password on the login page.
2. Select the verification method.
3. Answer the reserved security questions.
Note
The answers are configured when you first activate the device.
4. Create a new password and confirm the password.
5. Click Next to save the settings.
9.3 Overview
You can view the live video of the device, person information, network status, basic information,
and device capacity.
84
Figure 9-1 Overview Page

Function Descriptions:
Real-Time Event
You can view the event Employee ID, Name, Card No., Event Type, Time, and Operation. You can
also click View More to enter the page of Event Search. You can select event types, enter the
employee ID, the name, the card No., the start time, and the end time, and click Search. The
results will be displayed on the right panel.
Door Status
Click to view the device live view.
Set the volume when starting live view.
Note
If you adjust the volume when starting two-way audio, you may hear a repeated sounds.
You can capture image when starting live view.
Select the streaming type when starting live view. You can select from the main stream, sub
stream or third stream.
Full screen view.
You can record when starting live view.

/ / /
85
The door status is open/closed/remaining open/remaining closed.

Controlled Status
You can control the door to be opened, closed, remaining open or remaining closed
according to your actual needs.
Person Information
You can view the added and not added information of person face, card and fingerprint.
Network Status
You can view the connected and registered status of wired network, wireless network, cloud
service and ISUP.
Basic Information
You can view the model, serial No. and firmware version.
Device Capacity
You can view the person, face, card, fingerprint and event capacity.
9.4 Person Management

Click Add to add the person's information, including the basic information, certificate,
authentication and settings.
86
Figure 9-2 Add Person
87
Add Basic Information

Click Person Management → Add to enter the Add Person page.
Add the person's basic information, including the employee ID, the person's name, the gender,
person type.
If you select Visitor as the person type, you can set the visit times.
Click Save to save the settings.
Set Permission Time
Enable Long-Term Effective User, or set Validity Period and the person can only has the permission
within the configured time period according to your actual needs.
Add Face Picture
Click + on the right to upload a face picture from the local PC.
Note
The picture format should be JPG or JPEG or PNG, and the size should be less than 200 K.

Add Card
Click Add Card, enter the Card No. and select the Property, and click OK to add the card.
Note
Up to 50 cards can be added.
Add Fingerprint
Note
Only devices supporting the fingerprint function can add the fingerprint.

Click Add Fingerprint, and press your finger on the fingerprint module of the device to add your
fingerprint.
Set Room No.
Enter the Floor No. and Room No..
88
Click to delete it.

Authentication Settings
Set Authentication Type as Same as Device or Custom.
9.5 Search Event

Click Event Search to enter the Search page.
Enter the search conditions, including the event type, the employee ID, the name, the card No., the
start time, and the end time, and click Search.
The results will be displayed on the right panel.
9.6 Configuration
9.6.1 Set Local Parameters

Set the live view parameters, record file saving path, and captured pictures saving path.
Set Live View Parameters

Click Configuration → Local to enter the Local page. Configure the stream type, the play
performance, auto start live view, and the image format and click Save.
Set Record File Saving Path
Click Configuration → Local to enter the Local page. Select a record file size and select a saving
path from your local computer and click Save.
You can also click Open to open the file folder to view details.
Set Captured Pictures Saving Path
Click Configuration → Local to enter the Local page. Select a saving path from your local computer
and click Save.
You can also click Open to open the file folder to view details.
9.6.2 View Device Information

View the device name, language, model, serial No., version, IO input, IO output, Lock, Local RS-485,
alarm input, alarm output, and device capacity, etc.
89
Click Configuration → System → System Settings → Basic Information to enter the configuration
page.
You can view device name, language, model, serial No., version, IO input, IO output, Lock, Local
RS-485,alarm input, alarm output, and device capacity, etc.
9.6.3 Set Time

Set the device's time, time zone, synchronization mode, server address, NTP port, and interval.
Click Configuration → System → System Settings → Time Settings .
Click Save to save the settings after the configuration.
Time Zone
Select the device located time zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device time should be synchronized manually. You can set the device time
manually or check Sync. with Computer Time to synchronize the device time with the
computer's time.
Server Address Type/Server Address/NTP Port/Interval
You can set the server address type, server address, NTP port, and interval.
9.6.4 Set DST

Steps
1. Click Configuration → System → System Settings → DST .
Figure 9-3 DST Page

2. Check Enable DST.
3. Set the DST start time, end time and bias time.
4. Click Save to save the settings.
90
9.6.5 Change Administrator's Password

Steps
1. Click Configuration → System → User Management .
2. Click .
3. Enter the old password and create a new password.
4. Confirm the new password.
5. Click Save.
Caution
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can better protect your product.
9.6.6 View Device Arming/Disarming Information

View device arming type and arming IP address.
Click Configuration → System → User Management → Arming/Disarming Information .
You can view the device arming/disarming information. Click Refresh to refresh the page.
9.6.7 Network Settings

Set TCP/IP, port, Wi-Fi parameters, ISUP, and platform access.
Note
Some device models do not support Wi-Fi or mobile data settings. Refer to the actual products
when configuration.
Set Basic Network Parameters

Click Configuration → Network → Network Settings → TCP/IP .
91
Figure 9-4 TCP/IP Settings Page

Set the parameters and click Save to save the settings.
NIC Type
Select a NIC type from the drop-down list. By default, it is Self-Adaptive.
DHCP
If uncheck the function, you should set the IPv4 address, IPv4 subnet mask and IPv4 default
gateway.
If you check the function, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4
default gateway automatically.
DNS Server
Set the preferred DNS server and the Alternate DNS server according to your actual need.
92
Set Wi-Fi Parameters

Set the Wi-Fi parameters for device wireless connection.
Steps
Note
1. Click Configuration → Network → Network Settings → Wi-Fi .
Figure 9-5 Wi-Fi Settings Page

2. Check Wi-Fi.
3. Select a Wi-Fi
- Click Connect of a Wi-Fi in the list and enter the Wi-Fi password.
- Click Manual Add and enter a Wi-Fi's SSID, working mode, security mode, and password. Click
OK.
4. Set the WLAN parameters.
1) Set the IP address, subnet mask, and default gateway. Or enable DHCP and the system will
allocate the IP address, subnet mask, and default gateway automatically.
5. Set the DNS server. Set the preferred DNS server and alternate DNS server. Or enable DHCP and
the system will allocate the preferred DNS server and alternate DNS server automatically.
6. Click Save.
Set Port Parameters

Set the HTTP, HTTPS, HTTP Listening, RTSP and Server port parameters.
Click Configuration → Network → Network Service → HTTP(S) .
93
HTTP
It refers to the port through which the browser accesses the device. For example, when the
HTTP Port is modified to 81, you need to enter http://192.0.0.65:81 in the browser for login.
HTTPS
Set the HTTPS for accessing the browser. Certificate is required when accessing.
HTTP Listening
The device can send alarm information to the event alarm IP address or domain name via HTTP
protocol/HTTPS protocol. Edit the event alarm IP address or domain name, URL, port, and
protocol.
Note
The event alarm IP address or domain name should support the HTTP protocol/HTTPS protocol
to receive the alarm information.
Click Configuration → Network → Network Service → RTSP .
RTSP
It refers to the port of real-time streaming protocol.
Click Configuration → Network → Device Access → SDK Server .
SDK Server
It refers to the port through which the client adds the device.
Platform Access
Platform access provides you an option to manage the devices via platform.
Steps
1. Click Configuration → Network → Device Access → Hik-Connect to enter the settings page.
Note
Hik-Connect is an application for mobile devices. With the App, you can view live image of the
device, receive alarm notification and so on.
2. Check Enable to enable the function.
3. Optional: Check the checkbox of Custom, and you can set the server address by yourself.
4. Enter the server IP address, and verification code.
Note
6 to 12 letters (a to z, A to Z) or numbers (0 to 9), case sensitive. You are recommended to use a
combination of no less than 8 letters or numbers.
5. Enable Video Encryption, and create the password and confirm it.
94
Note
After adding the device to APP, you need to enter the video encryption password to live view the
device.
6. Optional: Click View to view the device QR code. Scan the QR code to account.
Note
Scan the QR code before it loses efficacy.
7. Optional: Click More to set the network connection priority.
1) Enable WLAN or Wired Network according to your actual needs.
1) Hold and drag to adjust the access priority.
8. Click Save to enable the settings.
Set ISUP Parameters

Set the ISUP parameters for accessing device via ISUP protocol.
Steps
Note
1. Click Configuration → Network → Device Access → ISUP .
2. Check Enable.
3. Set the ISUP version, server address, port, device ID, and the ISUP status.
Note
If you select 5.0 as the version, you should set the encryption key as well.
4. Set the ISUP listening parameters, including ISUP alarm center IP address/domain name, ISUP
alarm center URL, and ISUP alarm center port.
5. Click Save.
9.6.8 Set Video and Audio Parameters

Set the image quality and resolution.
Set Video Parameters

Click Configuration → Video/Audio → Video .
Set the camera name, stream type, video type, resolution, bit rate type, Max. bit rate and I Frame
Interval.
95
Note
The functions vary according to different models. Refers to the actual device for details.
Set Audio Parameters

Click Configuration → Video/Audio → Audio .
Set the audio stream type, input volume, and output volume.
Check Enable Voice Prompt according to your needs.
9.6.9 Set Image Parameters

You can adjust the image parameters, video parameters, supplement light parameters, beauty
parameters, enable WDR and set capture interval.
Steps
1. Click Configuration → Image .
2. Configure the parameters to adjust the image.
Image Adjustment
Drag the block or enter the value to adjust the live video's brightness, contrast, saturation,
and sharpness.
Video Adjustment (Video Standard)
Set the video frame rate when performing live view remotely. After changing the standard,
you should reboot the device to take effect.
PAL
25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East
countries, Europe countries, etc.
NTSC
30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the
Philippines, etc.
Supplement Light
Set the supplement light type, mode, start time and end time. You can also set the
brightness.
Beauty
Set whiten and smooth value for the face appeared on the device live view page.
Backlight
Enable or disable WDR.
When there are both very bright and very dark areas simultaneously in the view, WDR
balances the brightness level of the whole image and provide clear images with details.
Start All Recording
96
You can click to record when starting live view.

Capture Interval
You can click to capture image when starting live view.
Full Screen
You can click for full screen view.
3. Click Restore Default Settings to restore the parameters to the default settings.
9.6.10 Alarm Settings

Set the alarm output parameters.
Steps
1. Click Configuration → Event → Alarm Settings → Alarm Output .
2. Set Alarm Name and Output Delay.
9.6.11 Access Control Settings
Set Authentication Parameters

Click Configuration → Access Control → Authentication Settings .
Note

If select Terminal 1:
Terminal/Terminal Type/Terminal Model
Select terminal and get the terminal description. They are read-only.
Enable Authentication Device
Enable the authentication function.
Authentication
Select an authentication mode according to your actual needs from the drop-down list.
Recognition Interval
You can set the interval between 2 continuous recognition of a same person during the
authentication. In the configured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
Authentication Interval
97
You can set the authentication interval of the same person when authenticating. The same
person can only authenticate once in the configured interval. A second authentication will be
failed.
Alarm of Max. Failed Attempts
Enable to report alarm when the card reading attempts reach the set value.
Tampering Detection
Enable the anti-tamper detection for the card reader.
Card No. Reversing
The read card No. will be in reverse sequence after enabling the function.
If select Terminal 2:
Terminal/Terminal Type/Terminal Model
Select terminal and get the terminal description. They are read-only.
Enable Authentication Device
Enable the authentication function.
Sub Card Reader Position
You can select sub card reader position as different or same side as the main card reader.
Authentication
Select an authentication mode according to your actual needs from the drop-down list.
Recognition Interval
You can set the interval between 2 continuous recognition of a same person during the
authentication. In the configured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
Alarm of Max. Failed Attempts
Enable to report alarm when the card reading attempts reach the set value.
Communication with Controller Every
When the access control device cannot connect with the card reader for longer than the set
time, the card reader will turn offline automatically.
Max. Interval When Entering Password
When you entering the password on the card reader, if the interval between pressing two digits
is longer than the set value, the digits you pressed before will be cleared automatically.
OK LED Polarity/Error LED Polarity
Set OK LED Polarity/Error LED Polarity of the access control device according to the card reader
parameters. Generally, adopts the default settings.
Tampering Detection
Enable the anti-tamper detection for the card reader.
98
Set Door Parameters

Click Configuration → Access Control → Door Parameters .
Figure 9-6 Door Parameters Settings Page

Door Name
You can create a name for the door.
Open Duration
Set the door unlocking duration. If the door is not opened for the set time, the door will be
locked.
Door Open Timeout Alarm
An alarm will be triggered if the door has not been closed within the configured time duration.
Door Magnetic Sensor Type
You can set the door contact as Remain Open or Remain Closed according to your actual needs.
By default, it is Remain Closed.
Exit Button Type
You can set the exit button as Remain Open or Remain Closed according to your actual needs.
By default, it is Remain Open.
Door Lock Powering Off Status
99
You can set the door lock status when the door lock is powering off. By default, it is Remain
Closed.
Extended Open Duration
The door contact can be enabled with appropriate delay after person with extended access
needs swipes her/his card.
Door Remain Open Duration with First Person
Set the door open duration when first person is in. After the first person is authorized, it allows
multiple persons access the door or other authentication actions.
Duress Code
The door can open by inputting the duress code when there is duress. At the same time, the
client can report the duress event.
Super Password
The specific person can open the door by inputting the super password.
Note
The duress code and the super code should be different.
Set RS-485 Parameters

You can set the RS-485 parameters including the peripheral, address, baud rate, etc.
Click Configuration → Access Control → RS-485 Settings .
Check Enable RS-485, and set the parameters.
No.
Set the RS-485 No.
Peripheral Type
Select a peripheral from the drop-down list according the actual situation. You can select from
Card Reader, Extension Module, Access Controller, or Disable.
Note
After the peripheral is changed and saved, the device will reboot automatically.
RS-485 Address
Set the RS-485 Address according to your actual needs.
100
Note
If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set
the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address
according to the door No.
Baud Rate
The baud rate when the devices are communicating via the RS-485 protocol.
Set Terminal Parameters

You can set terminal parameters for accessing.
Click Configuration → Access Control → Terminal Parameters .
You can set Working Mode as Access Control Mode. The access control mode is the device normal
mode. You should authenticate your credential for accessing.
Set Wiegand Parameters

You can set the Wiegand transmission direction.
Steps
Note
Some device models do not support this function. Refer to the actual products when configuration.
1. Click Configuration → Access Control → Wiegand Settings .
2. Check Wiegand to enable the Wiegand function.
3. Set a transmission direction.
Input
The device can connect a Wiegand card reader.
Output
The can connect an external access controller. And the two devices will transmit the card No.
via Wiegand 26 or 34.
4. Click Save to save the settings.
Note
If you change the peripheral, and after you save the device parameters, the device will reboot
automatically.
101
9.6.12 Video Intercom Settings
Set Video Intercom Parameters

The device can be used as a door station, outer door station, or access control device. You should
set the device No. before usage.
Click Configuration → Intercom → Device No. .
If set the device type as Door Station or Access Control Device, you can set the floor No., door
station No., and click More to set Community No., Building No., and Unit No.
Figure 9-7 Device No. Settings

Device Type
The device can be used as a door station or outer door station. Select a device type from the
drop-down list.
Note
If you change the device type, you should reboot the device.
Floor No.
102
Door Station No.

Note
● If you change the No., you should reboot the device.
● The main door station No. is 0, and the sub door station No. ranges from 1 to 16.
Community No.
Building No.
Set the device building No.
Unit No.
Set the device unit No.
Note
If you change the No., you should reboot the device.
If set the device type as Outer Door Station, you can set outer door station No., and community
No.
Outer Door Station No.
If you select outer door station as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Community No.
Set Linked Network Settings

Click Configuration → Intercom → Linked Network Settings .
You can set the device type, the SIP server's IP address, and the main station's IP address.
After setting the parameters, you can communicate among the access control device, door station,
indoor station, main station, and the platform.
Press Button to Call

Steps
1. Click Configuration → Intercom → Press Button to Call to enter the settings page.
103
2. Check Call Indoor Station, Call Specified Indoor Station, Call Management Center or APP at
your needs.
Note
If you check Call Specified Indoor Station, you need to enter the number of the indoor station.
3. Click Save.
Linked Network Settings

Enable the communication between access control device, and video intercom server.
Steps
1. Click Configuration → Intercom → Linked Settings to enter the settings page.
2. Set parameters.
SIP Server IP Address
Set the IP address of the SIP server.
Main Station IP
IP address of the main station.
3. Click Save.
9.6.13 Card Settings
Set Card Security

Click Configuration → Card Settings → Card Type to enter the settings page.
Set the parameters and click Save.
Enable NFC Card
In order to prevent the mobile phone from getting the data of the access control, you can
enable NFC card to increase the security level of the data.
Note
Disable NFC card cannot completely avoid presenting NFC card.
Enable M1 Card
Enable M1 card and authenticating by presenting M1 card is available.
M1 Card Encryption
Sector
M1 card encryption can improve the security level of authentication.
104
Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is
recommended to encrypt sector 13.
Enable EM Card
Enable EM card and authenticating by presenting EM card is available.
Enable DESFire Card
The device can read the data from DESFire card when enabling the DESFire card function.
Enable FeliCa Card
The device can read the data from FeliCa card when enabling the FeliCa card function.
Set Card No. Authentication Parameters

Set the card reading content when authenticate via card on the device.
Go to Configuration → Card Settings → Card No. Authentication Settings .
Select a card authentication mode and click Save.
Full Card No.
All card No. will be read.
Wiegand 26 (3 bytes)
The device will read card via Wiegand 26 protocol (read 3 bytes).
Wiegand 34 (4 bytes)
The device will read card via Wiegand 34 protocol (read 4 bytes).
9.6.14 Time and Attendance Status Settings

Set time and attendance status, for example, manual, auto, manual and auto.
Set Manual Attendance via Web

Set the attendance mode as manual, and you should select a status manually when you take
attendance.
Before You Start
Steps
1. Click Configuration → Attendance to enter the settings page.
2. Set the Attendance Mode as Manual.
3. Enable the Attendance Status Required and set the attendace status lasts duration.
105
Note
Result
You should select an attendance status manually after authentication.
Note
If you do not select a status, the authentication will be failed and it will not be marked as a valid
attendance.
Set Auto Attendance via Web

Set the attendance mode as auto, and you can set the attendance status and its available schedule.
The system will automatically change the attendance status according to the configured schedule.
Before You Start
Steps
2. Set the Attendance Mode as Auto.
Note
6. Set the status' schedule. Refers to for details.
Set Manual and Auto Attendance via Web

Set the attendance mode as Manual and Auto, and the system will automatically change the
attendance status according to the configured schedule. At the same time you can manually
change the attendance status after the authentication.
Before You Start
Steps
2. Set the Attendance Mode as Manual and Auto.
106
Note
6. Set the status' schedule. Refers to for details.
Result
On the initial page and authenticate. The authentication will be marked as the configured
attendance status according to the schedule. If you tap the edit icon on the result tab, you can
select a status to take attendance manually, the authentication will be marked as the edited
attendance status.
Example
9.6.15 Set Privacy Parameters

Set the event storage type, picture upload and storage parameters, and the picture clearing
parameters.
Go to Configuration → Security → Privacy Settings
Event Storage Settings

Select a method to delete the event. You can select from Delete Old Events Periodically, Delete
Old Events by Specified Time, or Overwriting.
Delete Old Events Periodically
Drag the block or enter number to set the period for event deleting. All events will be deleted
according to the configured time duration.
Delete Old Events by Specified Time
Set a time and all events will be deleted on the configured time.
Overwriting
The earliest 5% events will be deleted when the system detects the stored events has been over
95% of the full space.
Authentication Settings
Display Authentication Result
You can check Face Picture, Name, Employee ID and Temperature to display the authentication
result.
Name De-identification
107
You can check Name De-identification, and the whole name will not be displayed.
Picture Uploading and Storage

Save Picture When Authenticating
Save picture when authenticating automatically.
Upload Picture When Authenticating
Upload the pictures when authenticating to the platform automatically.
Save Registered Picture
Save Pictures After Linked Capture
Upload Picture After Linked Capture
Capture Resolution
The resolution of the captured pictures is auto by default.
Capture Compression Quality
The compression quality of the captured pictures is low by default.
Save Thermographic Picture
If you enable this function, you can save the thermographic picture captured to the device.
Upload Thermographic Picture
Upload thermographic picture captured to the platform automatically.
Clear All Pictures in Device
Note
All pictures cannot be restored once they are deleted.
Clear Registered Face Pictures
All registered pictures in the device will be deleted.
Clear Captured Pictures
All captured pictures in the device will be deleted.
9.6.16 Set Biometric Parameters
Set Basic Parameters

Click Configuration → Smart → Smart .
108
Note
Figure 9-8 Smart Settings Page

Face Anti-spoofing
109
Enable or disable the live face detection function. If enabling the function, the device can
recognize whether the person is a live one or not.
Note
● Biometric recognition products are not 100% applicable to anti-spoofing environments. If you
require a higher security level, use multiple authentication modes.
● After disabling face anti-spoofing function, there will be spoofing recognition risks.
Anti-Spoofing Detection Level

After enabling the face anti-spoofing function, you can set the matching security level when
performing live face authentication.
Recognition Distance
Select the distance between the authenticating user and the device camera.
Pitch Angle
The maximum pitch angle when starting face authentication.
Yaw Angle
The maximum yaw angle when starting face authentication.
Face Picture Quality Grade for Applying
Set the face picture quality grade according to your needs.
1:1 Matching Threshold
Set the matching threshold when authenticating via 1:1 matching mode. The larger the value,
the smaller the false accept rate and the larger the false rejection rate.
Note
You are recommended to retain the default value. The adjustment will affect the face
misidentification rate and rejection rate.
1:N Matching Threshold
Set the matching threshold when authenticating via 1:N matching mode. The larger the value,
the smaller the false accept rate and the larger the false rejection rate.
Note
You are recommended to retain the default value. The adjustment will affect the face
misidentification rate and rejection rate.
Face Recognition Timeout Value
Set the timeout value when face recognizing. If the face recognition time is longer than the
configured value, the system will pop up a prompt.
ECO Mode
110
After enabling the ECO mode, the device will use the IR camera to authenticate faces in the low
light or dark environment. And you can set the ECO mode threshold, ECO mode (1:N), and ECO
mode (1:1).
Note
After enabling ECO mode, the face will be recognized in weak light or no light environment.
After disabling ECO mode, face recognition effect will decline in weak light or no light
environment.
ECO Mode Threshold
The larger the value, the device enter the ECO Mode easier.
ECO Mode (1:1)
Set the matching threshold when authenticating via ECO mode 1:1 matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejection rate.
ECO Mode (1:N)
Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejection rate
Face with Mask Detection
After enabling the face with mask detection, the system will recognize the captured face with
mask picture or not. You can set face with mask1:N matching threshold, it's ECO mode, and the
strategy.
Note
After enabling Face with Mask Detection function, recognition effect of people without mask
will be influenced.
None
The function is disabled. The device will not detect whether a person is wearing a face mask
or not.
Reminder of Wearing Face Mask
If the person do not wear the face mask when authenticating, the device will pop up a
prompt and the door will open.
Must Wear Face Mask
If the person do not wear the face mask when authenticating, the device will pop up a
prompt and the door will keep closed.
Face with Mask & Face (1:1)
Set the matching value when authenticating with face mask via 1:1 matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejection rate.
Face with Mask 1:N Matching Threshold
111
Set the matching threshold when authenticating with face mask via 1:N matching mode. The
larger the value, the smaller the false accept rate and the larger the false rejection rate.
Face with Mask & Face (1:1 ECO)
Set the matching value when authenticating with face mask via ECO mode 1:1 matching mode.
The larger the value, the smaller the false accept rate and the larger the false rejection rate.
Face with Mask 1:N Matching Threshold (ECO Mode)
Set the matching threshold when authenticating with face mask via ECO mode 1:N matching
mode. The larger the value, the smaller the false accept rate and the larger the false rejection
rate.
Enable Hard Hat Detection
After enabling the hard hat detection, you can set the strategy.
None
The function is disabled. The device will not detect whether a person is wearing a hard hat or
not.
Reminder of Wearing
If the person do not wear the hard hat when authenticating, the device will pop up a prompt
and the door will open.
Must Wear
If the person do not wear the hard hat when authenticating, the device will pop up a prompt
and the door will keep closed.
Set Recognition Area

Click Configuration → Smart → Area Configuration .
Drag the yellow frame in the live video or enter values for the left, right, top, and bottom margin to
adjust the recognition area. Only the face within the area can be recognized by the system.
9.6.17 Preference Settings

Set the theme, notice publication, prompt schedule, custom prompt, and authentication result
text.
Set Preference
You can set the display theme and the sleep time for the device.
Set Theme
Click Configuration → Preference .
112
Sleep
Enable Sleep and the device will enter the sleep mode when no operation within the configured
sleep time.
Display Mode
You can select display theme for device authentication. You can select Display Mode as
Authentication, Simple or Advertisement. When you select Simple, the information of name,
ID, face picture will be not displayed.
Notice Publication
You can set the notice publication for the device.
Click Configuration → Preference → Notice Publication .
Theme Management
Click Media Library Management → + to upload the picture from the local PC.
You can click +, and set Name and Type to create a theme. After creating the theme, click + in
the Theme Management panel to select pictures in the media library. Click OK to add pictures
to the theme.
Customize Audio Content

Customize the output audio content when authentication succeeded and failed.
Steps
1. Click Configuration → Preference → Prompt Schedule .
113
Figure 9-9 Customize Audio Content

2. Enable the function.
3. Optional: Click to enable Temperature Broadcast.
4. Set the appellation.
5. Set the time period when authentication succeeded.
1) Click Add Time Duration.
2) Set the time duration and the language.
Note
If authentication is succeeded in the configured time duration, the device will broadcast the
configured content.
3) Enter the audio content.
4) Optional: Repeat substep 1 to 3.
5) Optional: Click to delete the configured time duration.
6. Set the time duration when authentication failed.
1) Click Add Time Duration.
2) Set the time duration and the language.
114
Note
If authentication is failed in the configured time duration, the device will broadcast the
configured content.
3) Enter the audio content.
4) Optional: Repeat substep 1 to 3.
5) Optional: Click to delete the configured time duration.
7. Click Save.
Customize Prompt Voice

You can customize prompt voices for the device.
Steps
1. Click Configuration → Preference → Custom Prompt .
2. Click → and import audio file from local PC according to your actual needs.
Note
The uploaded audio file should be less than 512 kb, in WAV format.
Configure Authentication Result Text

Steps
1. Go to Configuration → Preference → Authentication Result Text .
2. Enable Customize Authentication Result Text.
3. Enter custom texts.
4. Click Save.
9.6.18 Upgrade and Maintenance

Reboot device, restore device parameters, and upgrade device version.
Reboot Device
Click Maintenance and Security → Maintenance → Restart .
Click Restart to reboot the device.
Upgrade
Click Maintenance and Security → Maintenance → Upgrade .
Select an upgrade type from the drop-down list. Click and select the upgrade file from your
local PC. Click Upgrade to start upgrading.
If the device has been connected to Hik-Connect and network, when there is a new installation
package in Hik-Connect, you can click Upgrade after Online Update to upgrade the device system.
115
Note
Do not power off during the upgrading.
Restore Parameters
Click Maintenance and Security → Maintenance → Backup and Reset .
Restore All
All parameters will be restored to the factory settings. You should activate the device before
usage.
Restore
The device will restore to the default settings, except for the device IP address and the user
information.
Import and Export Parameters

Click Maintenance and Security → Maintenance → Backup and Reset .
Export
Click Export to export the device parameters.
Note
You can import the exported device parameters to another device.
Import
Click and select the file to import. Click Import to start import configuration file.
Click Advanced Settings, and enter the admin password.
Face Parameter
Custom Anti-Spoofing Detection
Face Liveness Level
After enabling face anti-spoofing function, you can set the matching security level when
performing live face authentication.
Anti-Spoofing Detection Threshold
The larger the value, the smaller the false accept rate and the larger the false rejection
rate. The smaller the value, the larger the false accept rate and the smaller the false
rejection rate.
Lock Face for Anti-Spoofing Protection
After enabling this function, the device will lock automatically when anti-spoofing detection
failed.
Lock Duration
116
The lock duration after enabling Lock Face for Anti-Spoofing Protection when anti-spoofing
detection failed.
Unlock
You can click Unlock according to your needs.
Version Information
You can view the device information.
9.6.19 Device Debugging

You can set device debugging parameters.
Steps
1. Click Maintenance and Security → Maintenance → Device Debugging .
2. You can set the following parameters.
Enable SSH
To raise network security, disable SSH service. The configuration is only used to debug the
device for the professionals.
Print Log
You can click Export to export log.
Capture Network Packet
You can set the Capture Packet Duration, Capture Packet Size, and click Start Capture to
capture.
9.6.20 Log Query

You can search and view the device logs.
Go to Maintenance and Security → Maintenance → Log .
Set the major and minor type of the log type. Set the start time and end time for searching, and
click Search.
The results will be displayed below, which including the No., time, the major type the minor type,
the channel No., the local/remote user information, the remote host IP, etc.
9.6.21 Security Mode Settings

Set the security mode for logging in the client software.
On the Device for Management page, click Maintenance and Security → Security → Security
Service .
Select a security mode, and click Save.
117
Security Mode
High security level for user information verification when logging in the client software.
Compatible Mode
The user information verification is compatible with the old client software version when
logging in.
9.6.22 Certificate Management

It helps to manage the server/client certificates and CA certificate.
Note
The function is only supported by certain device models.
Create and Install Self-signed Certificate

Steps
1. Go to Configuration → System → Security → Certificate Management .
2. In the Certificate Files area, select a Certificate Type from the drop-down list.
3. Click Create.
4. Input certificate information.
5. Click OK to save and install the certificate.
The created certificate is displayed in the Certificate Details area.
The certificate will be saved automatically.
6. Download the certificate and save it to an asking file in the local computer.
7. Send the asking file to a certification authority for signature.
8. Import the signed certificate.
1) Select a certificate type in the Import Passwords area, and select a certificate from the local,
and click Install.
2) Select a certificate type in the Import Communication Certificate area, and select a certificate
from the local, and click Install.
Install Other Authorized Certificate

If you already has an authorized certificate (not created by the device), you can import it to the
device directly.
Steps
2. In the Import Passwords and Import Communication Certificate areas, select certificate type
and upload certificate.
118
3. Click Install.
Install CA Certificate
Before You Start
Prepare a CA certificate in advance.
Steps
2. Create an ID in the Inport CA Certificate area.
Note
The input certificate ID cannot be the same as the existing ones.
3. Upload a certificate file from the local.
4. Click Install.
119
Chapter 10 Other Platforms to Configure

You can also configure the device via iVMS-4200 Client Software or HikCentral Access Control. For
details, see the platforms' user manual.
iVMS-4200 Client Software
Click/tap the link to view the client software's user manual.
http://enpinfodata.hikvision.com/analysisQR/showQR/ca930247
HikCentral Access Control (HCAC)
Click/tap the link to view the HCAC's user manual.
http://enpinfodata.hikvision.com/analysisQR/showQR/f2f6cf42
120
Appendix A. Tips for Scanning Fingerprint
Recommended Finger
Forefinger, middle finger or the third finger.
Correct Scanning
The figure displayed below is the correct way to scan your finger:
You should press your finger on the scanner horizontally. The center of your scanned finger should
align with the scanner center.
Incorrect Scanning
The figures of scanning fingerprint displayed below are incorrect:
121
Environment
The scanner should avoid direct sun light, high temperature, humid conditions and rain.
When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your
finger and scan again.
Others
If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other
authentication methods.
If you have injuries on the scanned finger, the scanner may not recognize. You can change another
finger and try again.
122
Appendix B. Tips When Collecting/Comparing Face

Picture
The position when collecting or comparing face picture is as below:
Positions (Recommended Distance: 0.5 m)
Expression
● Keep your expression naturally when collecting or comparing face pictures, just like the
expression in the picture below.
● Do not wear hat, sunglasses, or other accessories that can affect the facial recognition function.
● Do not make your hair cover your eyes, ears, etc. and heavy makeup is not allowed.
Posture
In order to get a good quality and accurate face picture, position your face looking at the camera
when collecting or comparing face pictures.
123
Size
Make sure your face is in the middle of the collecting window.
124
Appendix C. Tips for Installation Environment
1. Light Source Illumination Reference Value

Candle: 10Lux
Bulb: 100~850Lux
Sunlight: More than 1200Lux
2. Install the device at least 2 meters away from the light, and at least 3 meters away from the
window or door.
3.Avoid backlight, direct and indirect sunlight
125
Appendix D. Dimension
Figure D-1 Dimension
126
UD15654B-G

Ds kt671ml

Uploaded by

Copyright:

Available Formats

Ds kt671ml

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ds kt671ml

Uploaded by

Copyright:

Available Formats

DS-K1T671 Series Face Recognition Terminal

About this Document

About this Product

Acknowledgment of Intellectual Property Rights

IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR

© Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

Indicates a potentially hazardous situation which, if not avoided, could

under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive

2006/66/EC (battery directive): This product contains a battery that cannot be

Product Name Model

Use only power supplies listed in the user instructions:

Model Manufacturer Standard

7.1.1 Login by Administrator ................................................................................................ 39

7.9.1 Disable Attendance Mode via Device ......................................................................... 68

9.6.4 Set DST ........................................................................................................................ 90

Features of Normal Series

Features of Advanced Series

Figure 2-1 Face Recognition Terminal Diagram

Table 2-1 Description of Face Recognition Terminal

2 Card Swiping Area Swipe card within this area.

No. Name Description

3.1 Installation Environment

3.2 Install with Gang Box

Figure 3-1 Mounting Template

Figure 3-2 Install Mounting Plate

Figure 3-3 Apply Silicone Sealant

Figure 3-4 Insert Fingerprint Module

Figure 3-5 Install Device

Figure 3-6 Secure Device

3.3 Install without Gang Box

Figure 3-7 Mounting Template

Figure 3-8 Insert Screw Socket

Figure 3-9 Install Mounting Plate

Figure 3-10 Apply Silicone Sealant

Figure 3-11 Install Fingerprint Module

Figure 3-12 Install Device

Figure 3-13 Secure Device

4.1 Terminal Description

Figure 4-1 Terminal Diagram

Table 4-1 Terminal Descriptions

Group No. Function Color Name Description

4.2 Wire Normal Device

Figure 4-2 Device Wiring

4.3 Wire Secure Door Control Unit

Figure 4-3 Secure Door Control Unit Wiring

● The default port No.: 8000

● The default user name: admin

5.1 Activate via Device

Figure 5-1 Activation Page

5.2 Activate via Web Browser

5.3 Activate via SADP

Before You Start

www.hikvision.com/en/ , and install the SADP according to the prompts.

Status of the device becomes Active after successful activation.

5.4 Activate Device via Client Software

Chapter 6 Quick Operation

6.1 Select Language

Figure 6-1 Select System Language

6.2 Set Password Change Type