EMech 22

Ex/ES/EM/T103A/2022
B.E. INFORMATION TECHNOLOGY & PRINTING ENGG. FIRST YEAR FIRST

SEMESTER EXAM - 2022
Subject: ENGINEERING MECHANICS (Module A)
Time: 3 Hours Full Marks: 100
Different questions of same group are to be answered together
Group -1
Answer any two (2) from the followings. 2 x 10 =20 Marks
1a. Find out the moment of the tension T= 21N about

base O of the crane as shown in FIGURE-1a.
FIGURE-1a.
1b. The 500 kg uniform beam is subjected to the three external

loads as shown in FIGURE- 1b. Compute the reactions at the
support point O. The x-y plane is vertical.
FIGURE- 1b.
1c. A loaded cantilever beam as shown in FIGURE-1c.

Find the moment of forces about O.
1
FIGURE-1c.
1d. The 30-N force P is applied perpendicular to the portion BC of the bent bar. Determine the moment of P
about point B and about point A.( FIGURE- 1d.)
FIGURE- 1d.
Group-2
Answer any three (3) from the following questions. 3 x 10 =30 Marks
2a. A smooth ball of radius r and weight 10N is

supported by a wire of length 2r as shown in
FIGURE-2a. Angle between the walls is 90⁰.
Find out reaction of each wall.
FIGURE-2a.
2b. In FIGURE- 2b, a vertical boom AE is supported

by guy wires from A to B, C and D. If the tensile
load in AD = 2320 N, find the forces in AC and AB
so that the resultant force on A will be vertical.
2
FIGURE- 2b.
2c. A block of weight 500Kgf is kept in equilibrium

by wedge as shown in FIGURE- 2c. Determine
the force P necessary. The coefficient of friction
is 0.2 for all surfaces and the wedge has a weight
of 50Kgf.
FIGURE- 2c.
2d. (i) State the Coulomb's law of friction/ state the laws of static friction.
(ii) Explain clearly the term 'Angel of Repose'?
Find the relation between angle of friction and angle of repose.
(iii) What are the applications of friction in engineering? 3+5+2= 10 Marks
2e. A force P is applied to string wound around large roller as shown in FIGURE- 2d. Assume µ same for all
contact surfaces, determine necessary condition for larger roller can be pulled over the smaller one.
FIGURE- 2d
2f. A sphere of weight 100 N and radius 10 cm hangs by a string AB = 20 cm and rests against a
smooth vertical wall at C as shown in the FIGURE- 2e. Determine the force F in the string AB and
normal reaction at C.
3
FIGURE- 2e
Group-3
Answer any two (2) from the following questions. 2 x 10 =20 Marks
3a. Locate the centroid of the shaded area

as shown in FIGURE-3a.
FIGURE-3a.
3b. Determine the position of the centre of gravity

of the plane lamina as shown in FIGURE-3b.
FIGURE-3b.
3c. Determine the area moment of inertia of the I-section (FIGURE-3c) about centroidal axis xg .
4
xg
FIGURE-3c
3d. Using integration, find the area and centroidal

distance xc of the shaded area as shown in
FIGURE- 3d. Using Pappus-Guidinus,
find the volume of the solid formed
by revolution about Y-axis. Compare
the result of volume as calculated by
direct integration method.
FIGURE- 3d.
3e. Determine the area M.I. of the rectangular lamina

about the centroidal x0 and y0-axis, the centroidal
polar axis z0 through C , the x-axis, and
the polar axis z through O as shown in FIGURE-3e.
FIGURE-3e.
3f. State and prove the parallel and perpendicular axes theorems of moment of Inertia of lamina
Group-4
Answer any three (3) from the following questions. 3 x 10 =30 Marks
4a. Show that Rmax = u² /g(1 ± sinβ), where u = velocity of projection, β = inclined angle between
plan and horizontal.
5
4b. A projectile is launched with an initial speed of 200 m/sec at an angle of 60ᴼ with respect to the
horizontal as shown in FIGURE - 4a. Compute the range ‘R’ as measured up the incline.
FIGURE - 4a.
4c. Find the tangential and normal acceleration components of a moving particle in
curvilinear path.
Or
Show that a = atêt + (v²/ρ)ên; where at = tangential component of acceleration, v = speed,

ρ = radius of curvature of path and ê t and ên are unit vector along tangent and normal
respectively.
4d. The rotation of the 3 meters arm ΄OA΄ as shown in FIGURE-4d, is defined by the
relation θ = 0.20t², where ΄θ΄ is expressed in radian and t in second. Block ΄B΄ slides along
the arm in such a way that its distance from ΄O΄ is r = 3 - 0.40t², where ΄r΄ is expressed in
metre and ΄t΄ in second. Dtermine the total velocity and acceleration of block ΄B΄ after arm
΄OA΄ has rotated through 30ᴼ. Also draw the F. B. D. of this system.
FIGURE-4d
4e A system of two pulleys is shown in FIGURE-4e. Find the
relations connecting the displacements, velocities and
accelerations of the blocks A and B.
6
FIGURE-4e
4f. The block as shown in FIGURE – 4f, has a mass of 150 Kg and rests on a rough plane
for which μs = 0.5 and μk = 0.4. If a force P(t) = 60t² N(t is in seconds) is applied to the
string, find the power development by the force when t = 5 seconds.
FIGURE – 4f
4g. A body weighing 300 N is pushed up in a 30° inclined plane by a 400 N force acting
parallel to the plane. If the initial velocity of the body is 1.5 m/s and coefficient of friction is
µ = 0.2, what velocity will the body have after moving 6 m? (Use work-energy method)

EMech 22

Uploaded by

Copyright:

Available Formats

EMech 22

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

EMech 22

Uploaded by

Copyright:

Available Formats

Ex/ES/EM/T103A/2022

B.E. INFORMATION TECHNOLOGY & PRINTING ENGG. FIRST YEAR FIRST

Time: 3 Hours Full Marks: 100

Different questions of same group are to be answered together

Answer any two (2) from the followings. 2 x 10 =20 Marks

1a. Find out the moment of the tension T= 21N about

1b. The 500 kg uniform beam is subjected to the three external

1c. A loaded cantilever beam as shown in FIGURE-1c.

2a. A smooth ball of radius r and weight 10N is

2b. In FIGURE- 2b, a vertical boom AE is supported

2c. A block of weight 500Kgf is kept in equilibrium

3a. Locate the centroid of the shaded area

3b. Determine the position of the centre of gravity

3d. Using integration, find the area and centroidal

3e. Determine the area M.I. of the rectangular lamina

Show that a = atêt + (v²/ρ)ên; where at = tangential component of acceleration, v = speed,

You might also like