CO 2 Component

二氧化碳类产品

Oil Strainers
油过滤器

21 22
 CONNECTION SIZE CONNECTION(mm)
MODEL 接口 Oil Return 接口（毫米）
型号 毫米 回油口
英寸（inch） A B C
（mm）
BLR/A-W 55833 3/8 ODF 10 1/4" 102 279 48
BLR/A-W 55824 1/2 ODF 12 1/4" 102 279 48
BLR/A-W 55855 5/8 ODF 16 1/4" 102 338 48
BLR/A-W 55866 3/4 ODF 19 1/4" 102 383 48
BLR/A-W 55877 7/8 ODF 22 1/4" 102 384 48
BLR/A-W 55888 1 ODF 25 1/4" 102 404 48
BLR/A-W 55889 1 1/8 ODF 28 1/4" 102 414 48
BLR/A-W 559011 1 3/8 ODF 35 1/4" 102 524 48
BLR/A-W 569011 1 3/8 ODF 35 3/8" 159 399 75
BLR/A-W 569213 1 5/8 ODF 42 3/8" 159 480 75
BLR/A-W 569417 2 1/8 ODF 54 3/8" 159 485 75

CONNECTION SIZE CONNECTION(mm)

MODEL 接口 Oil Return 接口（毫米）
型号 毫米 回油口
英寸（inch） A B C
mm
BLR/A-F 58824 1/2 ODF 12 1/4" 102 285 48
BLR/A-F 58855 5/8 ODF 16 1/4" 102 370 48
BLR/A-F 58877 7/8 ODF 22 1/4" 102 455 48
BLR/A-F 58889 1 1/8 ODF 28 1/4" 102 490 48
BLR/A-F 589011 1 3/8 ODF 35 1/4" 102 520 48
BLR/A-F 579011 1 3/8 ODF 35 3/8" 159 404 75
BLR/A-F 579213 1 5/8 ODF 42 3/8" 159 490 75
BLR/A-F 589213 1 5/8 ODF 42 1/4" 102 525 48
BLR/A-F 579417 2 1/8 ODF 54 3/8" 159 495 75

23 24
 Type A Type B Type C

25 26
 Type A Type B Type C Type D

BLR/OSR-058 3.3 102 496 93 88 111 D 5/8" ODS 88 120 -

27 28
 BLR/S Helical Oil Separator BLR/C Welded&Flanged Helical Oil Separator
BLR/S 高效油分 BLR/C 高效油分

General Description/描述 General Description/描述

◆Helical oil separator can be used in wide variety of applications.Common applications include multi-compressor racks and remote condensing Oil separators should be installed vertically on the discharge line,as close as possible to the compressor
◆
Connection diameter of the oil separators should be higher than or equal to the diameter of discharge line.
units.
◆
In the case of a multi-compressor installation mounted in parallel,it is recommended to use one oil separator
◆The function of BLR/S helical oil separator is to efficiently romove oil from the discharge gas and return it to the compressor ,either directly or by compressor,in order to keep an optimal efficiency at all operating rates,otherwise,the separator should be
indirectly.This helps maintain the compressor crankcase oil level and raises the efficiency of the system by preventing excessive oil circulation. selected based on the sum of each compressor's maximum capacity.
◆ The oil separation performances will depend directly on the flow rate of the oil/refrigerant mixture at the inlet
◆The standard product range is designed for use with HCFC and HFC refrigerants,along with their associated oils.The SN range is suitable for of the separators.
use with HCFC,HFC and ammonia oils. ◆ In order to prevent all risks of refrigerant condensation,it is recommended to not install the oil separators in the
air flow produced by the fans,In a cold environment,it may be necessary to provide for the installation of an heat
insulation or a heating element around the separators. E2 E2
ф2 ф2
◆应用比较广泛，通常用于并联机组跟分体冷凝机组. ◆ The efficiency of the oil separation is never 100%,especially with variable operating .
◆BLR/S 油分的主要功能是通过直接或间接的方式，高效地将油从废气中分离出来
◆油分安装时必须与排气管线垂直，越靠近压缩机越好 E1
并返回到压缩机里. 这有助于保持压缩机曲轴里面的油位，通过组织系统中过多的 E1
8x ф 10.2
◆油分的口径必须大于或等于排气口的口径 ф190
油循环来提高压缩机的效率。 ф1
E3
◆如果用于多台压缩机并联的系统中时，为了保持最佳的分油效率，我们建议一台压缩机配一个 E3
L
◆标准的产品可以用于HCFC 与HFC 制冷剂中，SN系列可以用于HCFC , 油分，另外，油分的选择应该基于所有压缩机的最大功率。 L ф1

HFC 跟氨气制冷剂中. ◆油分的性能直接取决于进口处油与制冷剂的混合流量

3/8" SAE
◆为了预防制冷剂凝结的风险，我们建议不要把油分安装在风机的出风方向。在一个寒冷的环境 3/8" SAE
中，可能需要在油分的周围装一个保温棉或者加热元件

◆油分的效率从来不会是100% 尤其是在使用不同的操作方法的时候。 , M10x25

E4
1/4"NPT E4

Drawing 1 Drawing 2

Connection
Model Drawing No. ф1 ф2 L E1 E2 E3 E4 Carly Reference Model
(ODF)
BLR/C-1503 S 3/8 1 101.6 109 283 80 71 175 84 Turboil 1503 S Turboil 1503 MMS
BLR/C-1504 S 1/2 1 101.6 109 283 80 71 175 84 Turboil 1504 S Turboil 1504 MMS
BLR/C-1505 S 5/8 1 101.6 109 305 82 73 197 84 Turboil 1505 S/MMS
BLR/C-3006 S 3/4 1 101.6 109 308 85 76 200 84 Turboil 3006 S Turboil 3006 MMS
BLR/C-3007 S 7/8 1 101.6 109 358 97 83 250 84 Turboil 3007 S Turboil 3007 MMS
BLR/C-3009 S 1 1/8 1 101.6 109 390 107 80 282 84 Turboil 3009 S Turboil 3009 MMS
BLR/C-3011 S 1 3/8 1 101.6 109 487 116 90 379 84 Turboil 3011 S/MMS
BLR/C-6009 S 1 1/8 1 101.6 109 434 107 80 327 84 Turboil 6009 S Turboil 6009 MMS
BLR/C-6011 S 1 3/8 1 101.6 109 549 116 90 441 84 Turboil 6011 S/MMS
BLR/C-7011 S 1 3/8 2 152.4 156 419 149 114 249 109 Turboil 7011 S/MMS
BLR/C-8013 S 1 5/8 2 152.4 156 498 149 114 329 109 Turboil 8013 S Turboil 8013 MMS
BLR/C-9017 S 2 1/8 2 152.4 156 512 162 127 342 109 Turboil 9017 S/MMS

E2
ф2
E2
ф2

Drawing Henry reference

高效油分 BLR/C WELDED&FLANGED HELICAL OIL SEPARATOR

Model Connection A B C D E F G Mounting details E1
reference model E1

BLR/S -5180 1/4 64 166 45 43 N/A 19.5 N/A M10 fig.1 S-5180 L1 L2 L2
BLR/S -5181 3/8 64 195 45 71 N/A 19.5 N/A M10 fig.1 S-5181 ф1 L1
ф1
BLR/S -5182 1/2 102 333 69 64 N/A 58.5 N/A M10 fig.2 S-5182-CE
BLR/S -5185 5/8 102 384 69 66 N/A 58.5 N/A M10 fig.2 S-5185-CE
E3
BLR/S -5187 7/8 102 434 74 76 N/A 58.5 N/A M10 fig.2 S-5187-CE
高效油分

E4 E3
BLR/S -5188 1 1/8 102 483 75 78 N/A 58.5 N/A M10 fig.2 S-5188-CE E5 E4
1/4"NPT ф9 E5
BLR/S -5190 1 3/8 152 384 108 91 N/A 60.5 N/A M10 fig.2 S-5190-CE 3/8"SAE
E6
30
1/4"NPT
3/8"SAE ф3
E6
ф9
ф3 52.6
BLR/S -5192 1 5/8 152 428 108 98 N/A 60.5 N/A M10 fig.2 S-5192-CE
BLR/S -5194 2 1/8 152 436 114 105 N/A 60.5 N/A M10 fig.2 S-5194-CE Drawing 1 Drawing 2
BLR/S HELICAL OIL SEPARATOR

BLR/S -5285 5/8 102 516 69 66 95 N/A 120.7 2*ф11 mm holes fig.3 S-5285-CE
Connection Volume
Model Drawing No ф1 ф2 ф3 L1 L2 E1 E2 E3 E4 E5 E6 Carly Reference Model
BLR/S -5287 7/8 102 563 74 76 95 N/A 120.7 2*ф11 mm holes fig.3 S-5287-CE (ODF) (L)
BLR/S -5288 1 1/8 102 614 75 78 95 N/A 120.7 2*ф11 mm holes fig.3 S-5288-CE BLR/C-F 2505S 5/8 1 101.6 109 140 303 441 82 73 113 204 222 35 2.29 Turboil -F 2505S/MMS
BLR/C-F 3007S 7/8 1 101.6 109 140 355 494 102 83 113 204 222 35 2.62 Turboil -F 3007S Turboil -F 3007MMS
BLR/SN -5190 1 3/8 152 508 108 91 99 N/A 113 2*ф14 mm holes fig.3 SN-5190-CE BLR/C-F 3009S 1 1/8 2 101.6 109 140 387 526 107 88 113 204 222 35 2.82 Turboil -F 3009S Turboil -F 3009MMS
BLR/SN -5192 1 5/8 152 559 108 98 99 N/A 113 2*ф14 mm holes fig.3 SN-5192-CE BLR/C-F 3011S 1 3/8 2 101.6 109 140 485 623 116 90 113 204 222 35 3.56 Turboil -F 3011S/MMS
BLR/C-F 7011S 1 3/8 2 152.4 156 200 395 523 148 114 99 258 276 40 5 Turboil -F 7011S/MMS
BLR/SN -5194 2 1/8 152 559 114 105 99 N/A 113 2*ф14 mm holes fig.3 SN-5194-CE
BLR/C-F 8013S 1 5/8 2 152.4 156 200 428 555 148 114 99 258 276 40 6 Turboil -F 8013S Turboil -F 8013MMS
BLR/S -5411 1 5/8 219 650 148 164 100 N/A 166 3*ф14 mm holes fig.4 S-5411-CE BLR/C-F 9017S 2 1/8 2 152.4 156 200 441 569 161 127 99 258 276 40 6 Turboil -F 9017S/MMS
BLR/S -5412 2 1/8 219 650 148 164 100 N/A 166 3*ф14 mm holes fig.4 S-5412-CE BLR/C-F 15013S 1 5/8 2 219.1 224 150 492 821 174 149 307 126 249 35 11.5 Turboil -F 15013S Turboil -F 15013MMS
BLR/C-F 15017S 2 1/8 2 219.1 224 150 550 879 195 171 301 126 249 35 13.2 Turboil -F 15017S/MMS
BLR/S -5413 2 5/8 273 758 183 201 125 N/A 223 3*ф14 mm holes fig.4 S-5413-CE BLR/C-F 15021S 2 5/8 2 219.1 224 150 565 894 215 184 301 126 249 35 13.4 Turboil -F 15021S Turboil -F 15021MMS
BLR/S -5414 3 1/8 324 831 215 229 100 N/A 273 3*ф14 mm holes fig.4 S-5414-CE BLR/C-F 30025S 3 1/8 2 219.1 224 150 577 906 234 185 301 126 249 35 13.5 Turboil -F 30025S Turboil -F 30025MMS

29 30
 BLR/T Coalescent And Conventional Oil Separator
BLR/T 油分

GENERAL DESCRIPTION / 描述

BLR/AOS-043 Automobile Oil Separator is designed for TRUCK AND BUS air conditioning and refrigeration system. To Prevent
the oil flow with the gas and influence the evaporator refrigeration capacity and condenser heat trap, normally there is one oil
separaotor installed between compressor and condenser.

BLR/AOS车用油分离器是专门为卡车和大巴车的制冷空调系统设计 的。为了防止压缩机里的油跟随制冷剂流向系统中，通常会
在压缩机和 冷凝器之间安装一个油分离器，用于防止冷凝器散热效果和制冷效果降低。

WORKING PRINCIPLE /工作原理：

Drawing 1 Drawing 2 Drawing 3 The working principle is to use the differential pressure to automaticly return the oil separated from the gas to crankcase to
guarantee the enough oil inside compressor, so that it can guarantee the compressor service life and refrigeration capacity

工作原理就是通过系统的高低压差，使系统里面的冷冻油和冷媒分 开，并自动的返回到压缩机曲轴箱内，来保证压缩机不缺油，进而更好地保护压
Oil Charge Temprite reference
Model Oil Conn. Size A B C D E Drawing No 缩机以及达到更好的制冷效果。
Amount Model
BLR/T-900 1/4" ODS 6.35mm 3/8" ODS 9.53mm 8-1/4" 210mm 3/4" 19mm 4" 102mm / 15 oz. 445ml 900

BLR/T-900-1 1/4" ODS 6.35mm 3/8" ODS 9.53mm 8-1/4" 210mm 3/4" 19mm 4" 102mm / 15 oz. 445ml Drawing 1 900-1

BLR/T-901 1/4" ODS 6.35mm 1/2" ODS 12.7mm 8-3/8" 213mm 3/4" 19mm 4" 102mm / 15 oz. 445ml 901

BLR/T-902 1/4" ODS 6.35mm 5/8" ODS 15.88mm 10-9/16" 268mm 3/4" 19mm 4" 102mm / 15 oz. 445ml 902
Drawing 2
BLR/T-903 1/4" ODS 6.35mm 7/8" ODS 22.23mm 10-7/8" 276mm 3/4" 19mm 4" 102mm / 15 oz. 445ml 903

BLR/T-904 1/4" ODS 6.35mm 1-1/8" ODS 28.58mm 15-1/8" 384mm 18-3/8" 467mm 4" 102mm 3" 76mm 16 oz. 475ml 904
Drawing 3
BLR/T-905 1/4" ODS 6.35mm 1 3/8" ODS 34.93mm 15-1/8" 384mm 18-3/8" 467mm 4" 102mm 3" 76mm 16 oz. 475ml 905

Temprite
Oil Charge
Model Oil Conn Size A B C D E reference
Amount
Model

1/2" ODS 10-1/4" 3/4" 4" 5-1/2" 16 oz.

BLR/T -501 1/4" SAE 501
12.7mm 260mm 19mm 102mm 140mm 475mm

5/8" ODS 12-7/8" 3/4" 4" 5-1/2" 16 oz.

BLR/T -502 1/4" SAE 502
15.88mm 327mm 19mm 102mm 140mm 475mm

7/8" ODS 14-5/8" 3/4" 4" 5-1/2" 16 oz. TYPE 1 TYPE 2 TYPE 3
BLR/T -503 1/4" SAE 503
22.23mm 371mm 19mm 102mm 140mm 475mm
油分

1-1/8"
15-1/2" 3/4" 4" 5-1/2" 16 oz.
BLR/T -504 1/4" SAE ODS 504
BLR/T Coalescent And Conventional Oil Separator

394mm 19mm 102mm 140mm 475mm

28.58mm
1-1/8"
18-7/8" 3/4" 4" 5-1/2" 16 oz.
BLR/T -505 1/4" SAE ODS 505
479mm 19mm 102mm 140mm 475mm
28.58mm

Temprite
Oil Charge
Model Oil Conn Size A B C D E reference
Amount
Model
1-5/8"
15-1/4" 20-1/4" 20-1/4" 6" 20 oz.
BLR/T-506 3/8" SAE ODS 506
387mm 514mm 514mm 152mm 590ml
41.28mm
2-1/8"
16-1/4" 21-1/4" 20-1/4" 6" 20 oz.
BLR/T-507 3/8" SAE ODS 507
413mm 540mm 514mm 152mm 590ml
53.98mm
TYPE 4 TYPE 5

31 32
33 34
35 36
 Adjustable Oil
Level Regulator

37 38
 BLR/S Oil Reservoir
BLR/S 储油器

Fig.1 Fig.2

Fig.3 Fig.4

BLR/VOR-16038 16 465 185 440 Connection Volume Henry

Model Dimension 尺寸 （ mm ）
接口 容积 Drawing No Reference
型号 A B C D E F
（ inch ） （L） Model
BLR/S-9109 3/8 6.9 426 507 152 177 165 N/A Fig.1 S-9109

BLR/SH-9109 3/8 8.2 522 604 152 225 165 N/A Fig.3 SH-9109

储油器
BLR/S -9108U 3/8 10.7 654 735 152 177 394 311 Fig.1 S-9108U

BLR/SH-9108U 3/8 12 751 832 152 225 394 N/A Fig.3 SH-9108U

BLR/S Oil Reservoir

BLR/S-9108 3/8 14.5 883 965 152 177 311 N/A Fig.2 S-9108

BLR/SH-9108 3/8 15.8 980 1061 152 225 311 311 Fig.4 SH-9108

39 40
 BLR/HOR卧式 储油器 & BLR/ODCV油压差止回阀
BLR/HOR Horizontal Oil Reservoir & BLR/ODCV Oil Differential Check Valve

Volume 容积
（L)

BLR/VORC-04038 3.8 290 290 85 130 140

BLR/VORC-06038 6
BLR/VORC-08038 8
BLR/VORC-10038 10
BLR/VORC-12038 12
BLR/VORC-14038 14
BLR/VORC-15012 15
BLR/VORC-18058 18 580 140
BLR/VORC-22058 22 700 420 140 420
BLR/VORC-30078 30 140
BLR/VORC-47118 47

115
115

Technical data / 技术参数

Max Working Pressure : 25Mpa
Working temp : - 50 ～120℃
Working Medium:mineral oil , emulsion,water,glycol,Phosphate
hydraulic fluid,CFC, HFC, HCFC ,R22、R134A、R404A、R507A

工作压力(最大 ):25MPa
工作温度:- 50 ～120℃
工作介质:矿物油、乳化液、水一乙二醇、磷酸酯液压液、CFC、 HFC、
HCFC(木棉定型滤纸仅适用于矿物油〕,R22、R134A、R404A、R507A

41 42
 Oil Reservoir

43 44