Page 1/8

Safety data sheet

according to 1907/2006/EC, Article 31
Printing date 20.02.2024 Version number 2 (replaces version 1) Revision: 29.11.2022

SECTION 1: Identification of the substance/mixture and of the company/undertaking

· 1.1 Product identifier
· Trade name: FOAM BAN® 155
· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.
· Application of the substance / the mixture Defoamers, Anti-foaming agent
· 1.3 Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
MÜNZING CHEMIE GmbH
Münzingstrasse 2
74232 Abstatt, Germany
E-Mail: info@munzing.com
Tel.: +49 7131 987-100
· Further information obtainable from:
Product Safety Department
E-mail (MSDS): msds@munzing.com
· 1.4 Emergency telephone number: For Chemical Emergencies: CHEMTREC: +1 703 741 5970

SECTION 2: Hazards identification

· 2.1 Classification of the substance or mixture
· Classification according to Regulation (EC) No 1272/2008
The product is not classified as hazardous, according to the CLP regulation.
· 2.2 Label elements
· Labelling according to Regulation (EC) No 1272/2008 Void
· Hazard pictograms Void
· Signal word Void
· Hazard statements Void
· Additional information:
EUH066 Repeated exposure may cause skin dryness or cracking.
Safety data sheet available on request.
· 2.3 Other hazards
· Results of PBT and vPvB assessment
· PBT: None.
· vPvB: None.
· Determination of endocrine-disrupting properties
The product does not contain any substance above the legal limits that has been included in the list drawn up
in accordance with Article 59(1) of Regulation (EC) No 1907/2006 due to endocrine disrupting properties or
that has endocrine disrupting or endocrine disrupting properties in accordance with Commission Delegated
Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605.

SECTION 3: Composition/information on ingredients

· 3.2 Mixtures
· Description: Mixture of substances listed below with nonhazardous additions.
· Dangerous components:
EC number: 920-107-4 Hydrocarbons, C12-15, n-alkanes, isoalkanes, cyclics, <2% 75-100%
Reg.nr.: 01-2119453414-43 aromatics
Asp. Tox. 1, H304, EUH066
· Additional information: For the wording of the listed hazard phrases refer to section 16.
EU
(Contd. on page 2)

58.0.1
 Page 2/8
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 20.02.2024 Version number 2 (replaces version 1) Revision: 29.11.2022

Trade name: FOAM BAN® 155

(Contd. of page 1)

SECTION 4: First aid measures

· 4.1 Description of first aid measures
· General information: Immediately remove any clothing soiled by the product.
· After inhalation:
Take affected persons into fresh air and keep quiet.
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms
persist.
In case of unconsciousness place patient stably in side position for transportation.
· After skin contact: Immediately wash with water and soap and rinse thoroughly.
· After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
· After swallowing: Do not induce vomiting; call for medical help immediately.
· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.
· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.

SECTION 5: Firefighting measures

· 5.1 Extinguishing media
· Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Use fire extinguishing methods suitable to surrounding conditions.
· For safety reasons unsuitable extinguishing agents: Water with full jet
· 5.2 Special hazards arising from the substance or mixture Can form explosive gas-air mixtures.
· 5.3 Advice for firefighters
· Protective equipment: Do not inhale explosion gases or combustion gases.
· Additional information
Cool endangered receptacles with water spray.
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.

SECTION 6: Accidental release measures

· 6.1 Personal precautions, protective equipment and emergency procedures
Use respiratory protective device against the effects of fumes/dust/aerosol.
Keep away from ignition sources.
Wear protective clothing.
· 6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water.
· 6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
· 6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

SECTION 7: Handling and storage

· 7.1 Precautions for safe handling
Store in cool, dry place in tightly closed receptacles.
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
(Contd. on page 3)
EU

58.0.1
 Page 3/8
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 20.02.2024 Version number 2 (replaces version 1) Revision: 29.11.2022

Trade name: FOAM BAN® 155

(Contd. of page 2)
· Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Protect from heat.
Fumes can combine with air to form an explosive mixture.
Protect against electrostatic charges.
· 7.2 Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles: Store in a cool location.
· Information about storage in one common storage facility: Store away from oxidising agents.
· Further information about storage conditions: Store in cool, dry conditions in well sealed receptacles.
· 7.3 Specific end use(s) No further relevant information available.

SECTION 8: Exposure controls/personal protection

· 8.1 Control parameters
· Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be
monitored at the workplace.
· Additional information: The lists valid during the making were used as basis.
· 8.2 Exposure controls
· Appropriate engineering controls No further data; see section 7.
· Individual protection measures, such as personal protective equipment
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
· Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use self-contained respiratory protective device.
· Hand protection
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
· Material of gloves
Butyl rubber, BR
Neoprene gloves
Recommended thickness of the material:  0,5 mm
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the
application.
· Penetration time of glove material
For the mixture of chemicals mentioned below the penetration time has to be at least 480 minutes
(Permeation according to EN 16523-1:2015: Level 6).
The determined penetration times according to EN 16523-1:2015 are not performed under practical
conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is
recommended.
· Eye/face protection Tightly sealed goggles
(Contd. on page 4)
EU

58.0.1
 Page 4/8
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 20.02.2024 Version number 2 (replaces version 1) Revision: 29.11.2022

Trade name: FOAM BAN® 155

(Contd. of page 3)
· Body protection: Protective work clothing

SECTION 9: Physical and chemical properties

· 9.1 Information on basic physical and chemical properties
· General Information
· Physical state: Liquid
· Colour: Yellowish
Cloudy
· Odour: Mineral-oil-like
· Odour threshold: Not determined.
· Melting point/freezing point: It is technically not possible to determine a value.
· Boiling point or initial boiling point and boiling
range The value is above the measuring range of the method.
Up to 200 °C no boiling point was observed.
· Flammability The mixture is capable of catching fire or being set on
fire.
· Lower and upper explosion limit
· Lower: ≈ 0,5 Vol % (01-2119453414-43)
· Upper: 5,0 Vol % (01-2119453414-43)
· Flash point: ≥ 95 °C (DIN EN ISO 2719)
· Auto-ignition temperature: 220 °C (01-2119453414-43)
· Decomposition temperature: Not applicable
· pH Mixture is non-polar/aprotic.
· Viscosity:
· Dynamic viscosity at 20 °C: ≈ 30 mPas (DIN EN ISO 3219)
· Kinematic viscosity at 40 °C >20,5 mm²/s (DIN EN ISO 51562)
· Solubility
· water: Insoluble.
· Partition coefficient n-octanol/water (log value) Not applicable (mixture).
· Vapour pressure at 20 °C: 0,03 hPa (01-2119453414-43)
· Density and/or relative density
· Density at 20 °C: ≈ 0,82 g/cm³ (DIN EN ISO 2811-1)
· Vapour density Not determined.
· Relative vapour density (air = 1) 6,8 (01-2119453414-43)
· 9.2 Other information
· Important information on protection of health and
environment, and on safety.
· Explosive properties: Product is not explosive. However, formation of
explosive air/vapour mixtures are possible.
· Change in condition
· Drip point: Not applicable
· Oxidising properties None.
· Evaporation rate Not determined.
· Information with regard to physical hazard classes
· Explosives Void
· Flammable gases Void
· Aerosols Void
· Oxidising gases Void
· Gases under pressure Void
· Flammable liquids Void
· Flammable solids Void
(Contd. on page 5)
EU

58.0.1
 Page 5/8
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 20.02.2024 Version number 2 (replaces version 1) Revision: 29.11.2022

Trade name: FOAM BAN® 155

(Contd. of page 4)

· Self-reactive substances and mixtures Void

· Pyrophoric liquids Void
· Pyrophoric solids Void
· Self-heating substances and mixtures Void
· Substances and mixtures, which emit flammable
gases in contact with water Void
· Oxidising liquids Void
· Oxidising solids Void
· Organic peroxides Void
· Corrosive to metals Void
· Desensitised explosives Void

SECTION 10: Stability and reactivity

· 10.1 Reactivity No further relevant information available.
· 10.2 Chemical stability
· Thermal decomposition / conditions to be avoided:
No decomposition if used and stored according to specifications.
· 10.3 Possibility of hazardous reactions
Flammable vapour-air mixtures may develop if stored in large receptacles and above room temperature.
Can react violently with oxygen rich (oxidising) material. Danger of Explosion.
· 10.4 Conditions to avoid No further relevant information available.
· 10.5 Incompatible materials: No further relevant information available.
· 10.6 Hazardous decomposition products: No dangerous decomposition products known.

SECTION 11: Toxicological information

· 11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008
· Acute toxicity Based on available data, the classification criteria are not met.
· LD/LC50 values relevant for classification:
Hydrocarbons, C12-15, n-alkanes, isoalkanes, cyclics, <2% aromatics
Oral LD50 >5.000 mg/kg (rat) (OECD 401)
Dermal LD50 >5.000 mg/kg (rabbit) (OECD 402)
· Skin corrosion/irritation Based on available data, the classification criteria are not met.
· Serious eye damage/irritation Based on available data, the classification criteria are not met.
· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.
· Germ cell mutagenicity Based on available data, the classification criteria are not met.
· Carcinogenicity Based on available data, the classification criteria are not met.
· Reproductive toxicity Based on available data, the classification criteria are not met.
· STOT-single exposure Based on available data, the classification criteria are not met.
· STOT-repeated exposure Based on available data, the classification criteria are not met.
· Aspiration hazard Based on available data, the classification criteria are not met.
· 11.2 Information on other hazards
· Endocrine disrupting properties
None of the ingredients is listed.
EU
(Contd. on page 6)

58.0.1
 Page 6/8
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 20.02.2024 Version number 2 (replaces version 1) Revision: 29.11.2022

Trade name: FOAM BAN® 155

(Contd. of page 5)

SECTION 12: Ecological information

· 12.1 Toxicity
· Aquatic toxicity:
Hydrocarbons, C12-15, n-alkanes, isoalkanes, cyclics, <2% aromatics
LL0 1.000 mg/l (fish) (Oncorhynchus mykiss / 96 h)
EL0 1.000 mg/l (algae) (green alga / 72 h)
1.000 mg/l (daphnia) (Daphnia magna / 48 h)
NOELR 1.000 mg/l (algae) (green alga / 72 h)
· 12.2 Persistence and degradability No further relevant information available.
· 12.3 Bioaccumulative potential No further relevant information available.
· 12.4 Mobility in soil No further relevant information available.
· 12.5 Results of PBT and vPvB assessment
According to Annex XIV of Regulation (EC) No.1907/2006 concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals (REACH): The product does not contain a substance fullfilling the
PBT (persistent/bioaccumulative/toxic) criteria or the vPvB (very persistent/very bioaccumulative) criteria.
Self classification.
· 12.6 Endocrine disrupting properties For information on endocrine disrupting properties see section 11.
· 12.7 Other adverse effects
· Behaviour in sewage processing plants:
Inhibition of degradation activity in activated sludge is not to be anticipated during correct introduction of
low concentrations. Do not release untreated into natural waters.
· Additional ecological information:
· General notes:
Due to available data on eliminability/decomposition and bioaccumulation potential a prolonged damage of
the environment is unlikely.
According to the criteria of the EU-classification and labelling "dangerous for environment"(93/21/EWG) the
substance/ the product has to be classified as non-hazardous for the environment.
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage
system.

SECTION 13: Disposal considerations

· 13.1 Waste treatment methods
· Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
· European waste catalogue
16 03 05* organic wastes containing hazardous substances
· Uncleaned packaging:
· Recommendation: Disposal must be made according to official regulations.
· Recommended cleansing agents: Water, if necessary together with cleansing agents.

SECTION 14: Transport information

· 14.1 UN number or ID number
· ADR/RID/ADN, IMDG, IATA Void
(Contd. on page 7)
EU

58.0.1
 Page 7/8
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 20.02.2024 Version number 2 (replaces version 1) Revision: 29.11.2022

Trade name: FOAM BAN® 155

(Contd. of page 6)

· 14.2 UN proper shipping name

· ADR/RID/ADN, IMDG, IATA Void
· 14.3 Transport hazard class(es)
· ADR/RID/ADN, IMDG, IATA
· Class Void
· 14.4 Packing group
· ADR/RID/ADN, IMDG, IATA Void
· 14.5 Environmental hazards:
· Marine pollutant: No
· 14.6 Special precautions for user Not applicable.
· 14.7 Maritime transport in bulk according to IMO
instruments Not applicable.
· Transport/Additional information: Not a dangerous good to the above specifications.
· UN "Model Regulation": Void

SECTION 15: Regulatory information

· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU
· Named dangerous substances - ANNEX I None of the ingredients is listed.
· DIRECTIVE 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and
electronic equipment – Annex II
None of the ingredients is listed.
· National regulations:
· Information about limitation of use:
Employment restrictions concerning juveniles must be observed.
Employment restrictions concerning pregnant and lactating women must be observed.
· Waterhazard class: Water hazard class 1 (German AwSV, Self-assessment): slightly hazardous for water.
· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.

SECTION 16: Other information

This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
· Relevant phrases
H304 May be fatal if swallowed and enters airways.
EUH066 Repeated exposure may cause skin dryness or cracking.
· Department issuing SDS:
Product Safety Department
E-Mail: msds@munzing.com
· Version number of previous version: 1
· Abbreviations and acronyms:
ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the
International Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
(Contd. on page 8)
EU

58.0.1
 Page 8/8
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 20.02.2024 Version number 2 (replaces version 1) Revision: 29.11.2022

Trade name: FOAM BAN® 155

(Contd. of page 7)
GHS: Globally Harmonised System of Classification and Labelling of Chemicals
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
CAS 7732-18-5: Water
Asp. Tox. 1: Aspiration hazard – Category 1
EU

58.0.1