Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    Versapox Novoline 98 PDS

    Uploaded by

    jfairbairn69
    The document describes a two component high solids, amine-cured novolac phenolic epoxy coating. It provides information on the product including intended uses, technical details, surface preparation, application instructions, and safety precautions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Versapox Novoline 98 PDS

    Uploaded by

    jfairbairn69
    3 views2 pages
    The document describes a two component high solids, amine-cured novolac phenolic epoxy coating. It provides information on the product including intended uses, technical details, surface preparation, application instructions, and safety precautions.

    Original Description:

    amine-cured novolac phenolic epoxy coating

    Original Title

    VERSAPOX NOVOLINE 98 PDS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a two component high solids, amine-cured novolac phenolic epoxy coating. It provides information on the product including intended uses, technical details, surface preparation, application instructions, and safety precautions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views2 pages

    Versapox Novoline 98 PDS

    Uploaded by

    jfairbairn69
    The document describes a two component high solids, amine-cured novolac phenolic epoxy coating. It provides information on the product including intended uses, technical details, surface preparation, application instructions, and safety precautions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Issue No.

    01 Sep 2019
    VERSAPOX NOVOLINE 98 Page 1 of 2

    PRODUCT A two component high solids, amine-cured novolac phenolic epoxy coating. Designed as a chemical resistant
    DESCRIPTION lining for steel and concrete substrates.

    INTENDED USES Highly resistant to crude oil and unleaded fuel. Waste water and a wide range of solvents, oils and chemicals.
    Extremely abrasion resistant, high mechanical strength, excellent chemical resistance.

    TECHNICAL
    INFORMATION Colour Light Grey and Light Cream

    Finish Semi-gloss

    Curing Agent Versapox Novoline 98 Activator

    Mix Ratio 2 parts Base : 1 part Activator by volume

    Specific Gravity Mixed: 1.33

    Volume Solids 98%

    Recommended Film Thickness 0.5 - 8.0 mm depending on service conditions.

    Theoretical Spreading Rate 2 m² / litre @ 500µm

    Application Method Plural Component Airless Spray, Airless Spray, Brush, Roller

    Re-coat After 6 hours and within 24 hours of initial application.

    Drying Times at 20ºC Touch Dry 6 hours Hard Dry 16 hours(recoat 16 hours)

    Full Cure at 20ºC 7 days to Shore D80-90

    SURFACE Steel:
    PREPARATION
    Ensure surfaces are free from contamination. Abrasive blast with grit to minimum BS 7079 standard SA 2 ½ -
    surface profile depth 75-100 microns.

    Mechanical tools may also be used providing a surface profile of minimum 75 microns can be achieved. Do
    not polish/burnish the steel surface.

    Concrete:

    Remove all laitance and other contaminants by blast cleaning. Ensure the concrete is dry to a reading of less
    than 10% moisture.

    Advanced Barrier Coatings Limited Commissioners Quay Quay Road Blyth Northumberland NE24 3AG
    Tel: +44 (0)1670 338414 E-mail: info@advancedbarriercoatings.com Web: www.advancedbarriercoatings.com
    Registered in England No 9532651 VAT No 211306567
    Issue No.01 Sep 2019
    VERSAPOX NOVOLINE 98 Page 2 of 2

    APPLICATION
    The surface must be kept clean and dry, and VERSAPOX NOVOLINE 98 applied within 4 hours and before
    any visible signs of deterioration of the cleaned surface.

    Application by two component spray system set at 2:1 mixing ratio. Minimum 3000 p.s.i.
    o
    Base temperature approx. 25 - 30 C
    o
    Hardener temperature approx. 25 - 30 C
    Spray Tip Size 0.53-0.68 mm (21-27 thou)

    Spray Grade for Plural Component Airless Spray,


    2 x 180 litre Base: 1 x 180 litre Hardener (540 L)
    2 x 20 litre Base: 1 x 20 litre Hardener ( 60 L)

    Spray Grade for Conventional Airless Spray


    1 x 12 litre Base: 1 x 6 litre Hardener ( 18 L)

    For hand application


    1 x 0.5 litre Base: 1 x 0.25 litre Hardener (0.75L)
    1 x 1.0 litre Base: 1 x 0.5 litre Hardener (1.5 L)
    0
    Pot Life 35 – 40 minutes at 20 C

    Brush / Roller - Repairs and stripe coating - Typically 150-300 microns

    Cleaning solvent. All equipment must be cleaned thoroughly immediately after use with Pracsolv EP

    REGULATORY DATA

    Flash Point 110°C

    VOC 30 g/litre

    Shelf life: 24 months from date of manufacture when stored in the original sealed containers at 20°C.

    SAFETY Refer to the product Material Safety Data Sheet supplied by Advanced Barrier Coatings Ltd.
    PRECAUTIONS Ensure all waste materials and empty containers are disposed of in accordance with local regulations.

    Disclaimer The information given in this technical data sheet - whether verbal, or in writing is for guidance only and is given in good faith, but without
    warranty. This also applies where proprietary rights or third parties are involved. Any person using Advanced Barrier Coatings Ltd products
    without first making further enquiries as to the suitability of the products for the intended purpose and testing the product s to assess their
    fitness for the purpose does so at their own risk. The application and surface preparation are beyond our control and are therefore your own
    responsibility, and we can accept no liability for the performance of the products arising out of such use. The information c ontained in this
    data sheet is liable to modification at any time and It is the user's responsibility to ensure that this sheet is current prior to using the product.

    Advanced Barrier Coatings Limited Commissioners Quay Quay Road Blyth Northumberland NE24 3AG
    Tel: +44 (0)1670 338414 E-mail: info@advancedbarriercoatings.com Web: www.advancedbarriercoatings.com
    Registered in England No 9532651 VAT No 211306567

    You might also like