9

lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 31 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

VALVE TAG NO. : BAV210 PIPING CLASS : STANDARD :

MFGRS
STANDARD API 607-1993, API608-1995 RATING : 150# CAT/FLG :
RATING ENDS
SIZE RANGE 1.1/2" - 12" ENDS : RF

CONSTRUCTION

BODY SPLIT BODY, FULL BORE

FLOATING BALL SIZE= < 4"
TRUNION MOUNT BALL FOR SIZE > 4"
LONG PATTERN

EXTENDED STEM NO

WRENCH OPERATED 1.1/2" - 6"

GEAR OPERATED 8" - 12"

FIRE SAFE YES

BODY A 216 Gr. WCB

BALL AISI316 OR C.S., CHROME PLATED

BODY SEAT RING PTFE

STEM PACKING PTFE GRAPHITE

STEM 13 Cr.

DESIGN CONDITIONS DESIGN CONDITIONS

Pressure rating ASME B16.34

Fluid Kg/cm2g oc
FUEL GAS 12 100

NOTES :
1. This valve spec. shall be read in conjunction with technical notes
for valves .

2. Bidder shall clear1y write all/any deviation against each part I

material of valve in the space provided for. Wherever bidder
agrees with POlL's spec. , bidder shall indicate "AGREED"

3. No. cutting I overwriting by bidder on POlL's spec. is allowed.

4. Testing shall be as per API 598-1996.

5. Copper and copper alloys not permitted.

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 32 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

VALVE TAG NO. : BAV220 PIPING CLASS : STANDARD :

MFGRS
STANDARD API608-1995 RATING : 150# CAT/FLG :
RATING ENDS
SIZE RANGE 1.1/2" - 12" 8" - 24" ENDS : RF

CONSTRUCTION

BODY SPLIT BODY, FULL BORE

TRUNION MOUNT BALL
LONGPATIERN
EXTENDED STEM NO

WRENCH OPERATED NO

GEAR OPERATED YES

FIRE SAFE YES

MATERIALS

BODY A 216 Gr. WCB

BALL AISI316 OR CF 8M CHROME PLATED

BODY SEAT RING AISI316 STELLITED

STEM PACKING PTFE GRAPHTE

STEM AISI 316

DESIGN CONDITIONS DESIGN CONDITIONS

Pressure rating ASME B16.34

Fluid Kg/cm2g oc
Potassium carbonate sol. 10 150

NOTES :
1. This valve spec. shall be read in conjunction with technical notes
for valves.

2. Bidder shall clearly write all/any deviation against each part I

material of valve in the space provided for. Wherever bidder
agrees with POll's spec., bidder shall indicate "AGREED"

3. No. cutting I overwriting by bidder on POll's spec. is allowed.

4. Testing shall be as per API 598-1996.

5. Copper and copper alloys not permitted.

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 33 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

VALVE TAG NO. : BAV501 PIPING CLASS : STANDARD :

MFGRS
STANDARD API 602-1993(7),API607-1993 RATING : 800# CAT/FLG :
ENDS RATING ENDS
API608-1995 THREADED(NPT) (6)
SIZE RANGE 1/2"- 1.1/2"

CONSTRUCTION

BODY THREE PIECES TYPE

FULL BORE
FLOATING BALL
EXTENDED STEM NO

WRENCH OPERATED YES

GEAR OPERATED NO
FIRE SAFE YES

BODY AISI316

BALL AISI316

BODY SEAT RING PTFE

STEM PACKING PTFE GRAPHTE

STEM AISI316

DESIGN CONDITIONS DESIGN CONDITIONS

Carbon
Pressure rating API602 dioxide 3.5 150
Fluid Kg/cm2g oc Phosphate 3 60

Instrument air 10 70

Demin water 12 150

NOTES :
1. This valve spec. shall be read in conjunction with technical notes
for valves .

2. Bidder shall clear1y write all/any deviation against each part I

material of valve in the space provided for. Wherever bidder
agrees with POll's spec., bidder shall indicate "AGREED"

3. No. cutting I overwriting by bidder on POll's spec. is allowed.

4. Testing shall be as per API 598-1996.

5. Copper and copper alloys not permitted.

6. Both ends female screwed.

7. Valve design shall generally comply with API 602

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 34 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

VALVE TAG NO. : BAV510 PIPING CLASS : STANDARD :

MFGRS
STANDARD API607-1993, API608-1995 RATING : 150# CAT/FLG :
RATING ENDS
SIZE RANGE 1.1/2" - 12" 1.1/2"- 12" ENDS : RF

CONSTRUCTION

BODY SPLIT BODY, FULL BORE

FLOATING BALL SIZE= < 4"
TRUNION MOUNT BALL FOR SIZE > 4"
LONG PATTERN

EXTENDED STEM NO

WRENCH OPERATED 1.1/2" - 6"

GEAR OPERATED 8" - 12"

FIRE SAFE YES

BODY A 351 Gr. CF 8M

BALL AISI316 OR C.S.CHROME PLATED

BODY SEAT RING PTFE

STEM PACKING PTFE GRAPHTE

STEM AISI 316

DESIGN CONDITIONS DESIGN CONDITIONS

Pressure rating ASME B16.34 Carbon dioxide 3.5 150

Fluid Kg/cm2g oc Phosphate 3 60

Demin. water 12 150

Instrument air 10 70

NOTES :
1. This valve spec. shall be read in conjunction with technical notes
for valves .

2. Bidder shall clear1y write all/any deviation against each part I

material of valve in the space provided for. Wherever bidder
agrees with POlL's spec. , bidder shall indicate "AGREED"

3. No. cutting I overwriting by bidder on POlL's spec. is allowed.

4. Testing shall be as per API 598-1996.

5. Copper and copper alloys not permitted.

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 35 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

VALVE TAG NO. : BAV520 PIPING CLASS : STANDARD :

MFGRS
STANDARD API607-1993, API608-1995 RATING : 150# CAT/FLG :
RATING ENDS
SIZE RANGE 8" - 24" ENDS : RF

CONSTRUCTION

BODY SPLIT BODY, FULL BORE

FLOATING BALL SIZE= < 4"
TRUNIOW MOUNT BALL FOR SIZE > 4"
LONG PATTERN

EXTENDED STEM NO

WRENCH OPERATED NO

GEAR OPERATED YES

FIRE SAFE YES

MATERIALS

BODY A 351 Gr. CF 8M

BALL A 351 Gr. 8M CHROME PLATED

BODY SEAT RING AISI316 STELLITED

STEM PACKING PTFE GRAPHTE

STEM AISI 316

DESIGN CONDITIONS DESIGN CONDITIONS

Pressure ratinQ ASME B16.34

Fluid Kg/cm2g oc
Potassium carbonate sol. 12 150

NOTES:
1. This valve spec. shall be read in conjunction with technical notes
for valves .

2. Bidder shall clearly write all/any deviation against each part I

material of valve in the space provided for. Wherever bidder
agrees with POlL's spec. , bidder shall indicate "AGREED"

3. No. cutting I overwriting by bidder on POlL's spec. is allowed.

4. Testing shall be as per API 598-1996.

5. Copper and copper alloys not permitted.

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 36 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

PIPING
VALVE TAG NO.: BUV213 CLASS : STANDARD :
STANDARD AP1609-1997 RATING : 150# MFGRS CAT/FLG :
ENDS
SIZE RANGE 2" - 24" : RF RATING : ENDS :

CONSTRUCTION
CAST, LUG TYPE WITH THREADED
BODY HOLES,
RUBBER LINED, CATEGORY "B"

GEAR OPERATED > = 8"

YES , FOR HYDROCARBON SERVICE
FIRE SAFE AS PER API 607-1993 ONLY

MATERIALS

BODY A 216 Gr. WCB

BODY LINING ETHYLENE-PROPYLENE

DISC A 216 Gr. WCB

SHAFT A 276 Gr. 316

SHAFT PACKING PTFE

DISK SEAL

SHAFT BUSHING

BODY SCREWS I PINS

BODY SEAT

SHAFT SEAL
CLAMPING RINGS
DESIGN CONDITIONS DESIGN CONDITIONS

Pressure rating API609

Fluid Kg/cm2g I oc
Cooling water 7 I 10
NOTES :
1. This valve spec. shall be read in conjunction with technical notes for
valves.

2. Bidder shall clearly write all/any deviation against each part/material

of valve in the space provided for. Wherever bidder agrees with
POlL's spec., bidder shall indicate "AGREED"

3. No cutting/overwriting by bidder on POlL's spec. is allowed.

4. Testing shall be as per API 598-1996

5. Copper and copper alloys not permitted.

6. Rubber lining : The wetted suffaces of valve body shall be fully

lined and the lining shall extend over the flange sealing face.

7. Lever operators suitable for throttling purposes shall be provided

for valves 6" and smaller.
 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 37 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

PIPING
VALVE TAG NO.: BUV510 CLASS : STANDARD :
STANDARD AP1609-1997 RATING : 150# MFGRS CAT/FLG :
ENDS
SIZE RANGE 8" - 48" : RF RATING : ENDS :

CONSTRUCTION

BODY WAFER TYPE CATEGORY "B"

GEAR OPERATED >=an

MATERIALS

BODY A 351 Gr. CF8

DISC STAINLESS TYPE 304

SHAFT A 276 Gr. 304

SHAFT PACKING PTFE

DISK SEAL

SHAFT BUSHING

BODY SCREWS I PINS

REINFORCED PTFE (MANUFACTURER MAY
BODY SEAT RECOM-
MEND ALTERNATIVE SEAT MATERIAL AND
SEAT
RATING SUBJECT TO PURCHASER
APPROVAL.

SHAFT SEAL
CLAMPING RINGS

DESIGN CONDITIONS DESIGN CONDITIONS

Pressure rating ASME B16.34

Fluid Kg/cm2g oc
Carbon dioxide (wet) 3.5 150

Demineralized water 12 150

NOTES:
1. This valve spec. shall be read in conjunction with technical notes for
valves.

2. Bidder shall clearly write all/any deviation against each part/material

of valve in the space provided for. Wherever bidder agrees with
POll's spec., bidder shall indicate "AGREED"

3. No cutting/overwriting by bidder on POll's spec. is allowed.

4. Testing shall be as per API 598-1996

5. Copper and copper alloys not permitted.

6. Flanges >24" ACC. to ASME B16.47 Series B.

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 38 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

STANDARD
VALVE TAG NO.: CHV201 PIPING CLASS :
STANDARD ASME B16.34-1996 RATING : 800# MFGRS CAT/FLG :
AP1602-1993(7) ENDS : SW RATING : ENDS :
SIZE RANGE 1/2" -1 .1/2"
CONSTRUCTION

BODY FORGED

BONNET TO BODY CONNECTION BOLTED

SEAT RING RENEWABLE /INTEGRAL

TYPE OF DISC BALL/ PLUG

ACCESSORIES

BY PASS
MATERIALS

BODY A 105

COVER

DISC A 182 Gr. F6a I AISI410

BODY SEAT RING A 182 Gr. F6a STELLITED I AISI410 STELLITED

DISC HINGE PIN
COVER STUD
BOLT

COVER NUT

COVER GASKET
DESIGN CONDITIONS DESIGN CONDITIONS
Nitrogen I Vent Gas I MP 10/3.5/
Pressure rating API602 Steam 2 70/70/200
Synthesis gas I
Fluid Kg/cm2g ·c condensate 31 70

Boiler feed water I Service Air I LP Steam 8/8/2 170/70/80 Ammonia liquid I gaseous 30/40 90/240
Nat. Gas/Naphtha/Hydrogen 50 150 Potassium carbonate sol. 45 150
Amm . Water I Cooling
Water 40/7 240/70
NOTES: Hydrazine I Fuel Gas 8/40 60/100

1. This valve spec. shall be read in conjunction with technical notes for
valves
2. Bidder shall clearly write all/any deviation against each part I material
of valve in the space provided for. Wherever bidder agrees with
POll's spec., bidder shall indicate "AGREED"
3. No. cutting I overwriting by bidder on POll's spec. is allowed

4. Testing shall be as per API 598-1996

5. Copper and copper alloys not permitted

6. If not otherwise stated the valve shall be full bore

7. Valve design shall generally comply with API 602

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 39 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

STANDARD
VALVE TAG NO.: CHV210 PIPING CLASS :
STANDARD ASME B16.34-1996 RATING : 150# MFGRS CAT/FLG :
API594-1991 (6) ENDS : RF I WAFER-LUG(6) RATING : ENDS :
SIZE RANGE 2"- 24"
CONSTRUCTION

BODY CAST

BONNET TO BODY CONNECTION BOLTED

SEAT RING RENEWABLE
SWING TYPE I SINGLE PLATE I DOUBLE PLATE
TYPE OF DISC TYPE (6)
ACCESSORIES NO

BY PASS NO
FLANGE THROUGH I THREADED BOLT HOLES
TYPE OF LUG FLANGE FOR WAFER (6)
LUG CHECK
VALVE
MATERIALS
A 216 Gr.
BODY WCB
COVER

DISC A 182 Gr. F6a I A216 Gr. WCB, 13% Cr. FACED
A 182 Gr. F6a STELLITED/A105/A216 Gr. WCB
BODY SEAT RING STELLITED
DISC HINGE PIN 13 Cr.
COVER STUD
BOLT

COVER NUT

COVER GASKET

SPRING AISI316
DESIGN CONDITIONS DESIGN CONDITIONS

Pressure rating ASME B16.34 Fuel gas 12 100

Fluid Kg/cm2g oc Nitrogen 10 150

Boiler feed water 6 150 Potassium carbonate sol. 10 150

Cooling water 7 70 Naphtha 9 70

NOTES:
1. This valve spec. shall be read in conjunction with technical notes for
valves
2. Bidder shall clearly write all/any deviation against each part I material
of valve in the space provided for. Wherever bidder agrees with
POlL's spec., bidder shall indicate "AGREED"
3. No. cutting I overwriting by bidder on POlL's spec. is allowed
4. Testing shall be as per API 598-1996
5. Copper and copper alloys not permitted
6. Wafer-lug type check valve conforming to API 594-1991 is also
acceptable.
 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 40 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

STANDARD
VALVE TAG NO.: CHV501 PIPING CLASS :
STANDARD ASME B16.34-1996 RATING : 800# MFGRS CAT/FLG :
API602-1993(7) ENDS : SW RATING : ENDS :
SIZE RANGE 1/2" -1 .1/2"
CONSTRUCTION

BODY FORGED

BONNET TO BODY CONNECTION BOLTED

SEAT RING RENEWABLE /INTEGRAL

TYPE OF DISC BALL/ PLUG

ACCESSORIES

BY PASS
MATERIALS
A 182 Gr.
BODY F304
COVER

DISC AISI304

BODY SEAT RING AISI304

DISC HINGE PIN
COVER STUD
BOLT
COVER NUT

COVER GASKET
DESIGN CONDITIONS DESIGN CONDITIONS
Pressure rating AP1602 Dimineralized water 12 150
Instrument
Fluid Kg/cm2g oc air 10 70
Process condensate 6 150 Phosphate 3 60

Potassium carbonate solution 10 150 Steam Condensate 8 120

NOTES:
1. This valve spec. shall be read in conjunction with technical notes for
valves

2. Bidder shall clearly write all/any deviation against each part I material
of valve in the space provided for. Wherever bidder agrees with
POll's spec., bidder shall indicate "AGREED"

3. No. cutting I overwriting by bidder on POll's spec. is allowed

4. Testing shall be as per API 598-1996

5. Copper and copper alloys not permitted

6. If not otherwise stated the valve shall be full bore

7. Valve design shall generally comply with API 602

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 41 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

STANDARD
VALVE TAG NO.: CHV510 PIPING CLASS :
STANDARD ASME B16.34-1996 RATING : 150# MFGRS CAT/FLG :
ENDS
SIZE RANGE 2" - 24" RF RATING : ENDS :

CONSTRUCTION

BODY CAST

BONNET TO BODY CONNECTION BOLTED

SEAT RING INTEGRAL

TYPE OF DISC SWING TYPE

ACCESSORIES NO

BY PASS NO
MATERIALS
A 351 Gr.
BODY CF8
COVER
A 182 Gr.
DISC F304

BODY SEAT RING A 182 Gr. F304 OR INTEGRAL

DISC HINGE PIN A276 Gr. 304
COVER STUD
BOLT

COVER NUT

COVER GASKET
DESIGN CONDITIONS DESIGN CONDITIONS
Instrument
Pressure rating ASME B16.34 air 10 70

Fluid Kg/cm2g oc Process condensate 6 150

Carbon dioxide 3.5 150 Potassium carbonate sol. 10 150

Demineralized
water 12 150 Phosphate 3 60
Steam Condensate 8 120
NOTES:
1. This valve spec. shall be read in conjunction with technical notes for
valves

2. Bidder shall clearly write all/any deviation against each part I material
of valve in the space provided for. Wherever bidder agrees with
POll's spec., bidder shall indicate "AGREED"

3. No. cutting I overwriting by bidder on POll's spec. is allowed

4. Testing shall be as per API 598-1996

5. Copper and copper alloys not permitted

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 42 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

VALVE TAG NO. : GLV201 PIPING CLASS : STANDARD :

RATING
STANDARD ASME B16.34-1996, 800# MFGRS CAT/FLG :
ENDS
API602-1993(8), BS5352 sw RATING : ENDS :
SIZE RANGE 1/2"- 1.1/2"
CONSTRUCTION
BODY FORGED
BONNET TO BODY CONNECTION BOLTED
HANDWHEEL RISING
STEM RISING
STEM AND YOKE TYPE OS&Y
DISC TYPE SWIVEL PLUG
GEAR OPERATED NO
BY PASS VALVE NO

MATERIALS
BODY A105
BONNET
STEM AISI304
DISC A182 Gr. F6a
A 182 Gr.F6a
BODY SEAT RING stellited
IMPREGNATED BRAIDED
STEM PACKING ASBESTOS
TRIM NUMBER
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKETS

DESIGN CONDITIONS DESIGN CONDITIONS

Nitrogen I Vent Gas I MP
Pressure rating ASME B16.34 I Steam 10/3.5/2 701701200
Fluid Kg/cm 2 g oc Nat. Gas I Naptha I Hydrogen 50 150
BFW I Service Air I LP Steam 8/8/2 170/70/180 Ammonia liquid I gaseous 30/40 90/240
Cooling water I Amm . Water 7/40 70/240 Potassium carbonate soln. 45 150
Synthesis Gas I Condensate 31 70
NOTES: Hydrazine I Fuel Gas 8/40 60/100
1. This valve spec. shall be read in conjunction with technical notes for
valves.

2. Bidder shall clearly write all/any deviation against each part/material

of valve in the space provided for. Wherever bidder agrees with
POll's spec., bidder shall indicate "AGREED"

3. No cutting/overwriting by bidder on POll's spec. is allowed .

4. Testing shall be as per API 598-1996

5. Copper and copper alloys not permitted.

6. Gland shall be suitable for repacking under pressure when valve is

fully open.
7. If not otherwise stated the valves shall be full bore.

8. Valve design shall generally comply with API 602

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 43 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

VALVE TAG NO.: GLV210 PIPING CLASS : STANDARD :

ASME B16.34-1996, RATING
STANDARD BS1873 150# MFGRS CAT/FLG :
ENDS
SIZE RANGE 2" -12" RF RATING : ENDS :

CONSTRUCTION
BODY CAST
BONNET TO BODY CONNECTION BOLTED
HANDWHEEL RISING
STEM RISING
STEM AND YOKE TYPE OS&Y
DISC TYPE PARABOLIC
GEAR OPERATED NO
BY PASS VALVE NO
MATERIALS
BODY A 216 Gr. WCB
BONNET
STEM 13 Cr.
A 182 Gr. F6a/A216 Gr. WCB
DISC 13% Cr. FACING
A 182 Gr. F6a /A105/A216 Gr.
BODY SEAT RING WCB,STELLITED
IMPREGNATED BRAIDED
STEM PACKING ASBESTOS
TRIM NUMBER
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKETS
DESIGN CONDITIONS DESIGN CONDITIONS
Pressure rating ASME B16.34 I Fuel gas I L.P.Steam 10/2 100/180
Fluid Kg/cm 2g oc Nitrogen I Amm . Gaseous 10/3.5 150/200
BFW/Process CondensateNent Gas 8/5/3.5 170/70/70 Naphtha 9 70
Cooling water I Service Air 7/8 70170 Potassium carbonate sol. 10 150
Steam Condensate I Amm .
Liquid 8/3.5 200170
NOTES: Ammonia Water I Hydrazine 8/8 60/60
1. This valve spec. shall be read in conjunction with technical notes for
valves.
2. Bidder shall clearly write all/any deviation against each part/material
of valve in the space provided for. Wherever bidder agrees with
POll's spec., bidder shall indicate "AGREED"
3. No cutting/overwriting by bidder on POll's spec. is allowed .
4. Testing shall be as per API 598-1996
5. Copper and copper alloys not permitted.
6. Gland shall be suitable for repacking under pressure when valve is
fully open.
7. If not otherwise stated the valves shall be full bore.

RATED Cv VALUES : +-10%)

SIZE I 2" I 3" I 4" I 6" 8" 10" I 12.. I
Cv I so I 120 I 220 I 490 900 1400 I 21oo I
 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 44 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

VALVE TAG NO.: GLV501 PIPING CLASS : STANDARD :

RATING
STANDARD ASME B16.34-1996, 800# MFGRS CAT/FLG :
ENDS
API602-1993(8), BS5352 sw RATING : ENDS :
SIZE RANGE 1/2"- 1.1/2"
CONSTRUCTION
BODY FORGED
BONNET TO BODY CONNECTION WELDED
HANDWHEEL RISING
STEM RISING
STEM AND YOKE TYPE OS&Y
DISC TYPE SWIVEL PLUG
GEAR OPERATED NO
BY PASS VALVE NO

MATERIALS
BODY A 182 Gr. F304
BONNET
STEM A276 Gr.304
DISC A 182 Gr. F304
BODY SEAT RING A 182 Gr. F304
IMPREGNATED BRAIDED
STEM PACKING ASBESTOS
TRIM NUMBER
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKETS

DESIGN CONDITIONS DESIGN CONDITIONS

Pressure rating AP1602 Potassium carbonate sol. 10 150
Fluid Kg/cm 2 g oc Phosphate 3 60
Process condensate 6 150 Instrument Air 10 70
Demineralized water 12 150 Steam Condensate 8 120

NOTES:
1. This valve spec. shall be read in conjunction with technical notes for
valves.

2. Bidder shall clearly write all/any deviation against each part/material

of valve in the space provided for. Wherever bidder agrees with
POll's spec., bidder shall indicate "AGREED"

3. No cutting/overwriting by bidder on POll's spec. is allowed .

4. Testing shall be as per API 598-1996

5. Copper and copper alloys not permitted.
6. Gland shall be suitable for repacking under pressure when valve is
fully open.
7. If not otherwise stated the valves shall be full bore.

8. Valve design shall generally comply with API 602

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 45 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

VALVE TAG NO. : GLV510 PIPING CLASS : STANDARD :

ASME B16.34-1996, RATING
STANDARD BS1873 150# MFGRS CAT/FLG :
ENDS
SIZE RANGE 2"- 8" RF RATING : ENDS :

CONSTRUCTION
BODY CAST
BONNET TO BODY CONNECTION BOLTED
HANDWHEEL RISING
STEM RISING
STEM AND YOKE TYPE OS&Y
DISC TYPE PARABOLIC
GEAR OPERATED NO
BY PASS VALVE NO

MATERIALS
BODY A 351 Gr. CF8
BONNET
STEM A 276 Gr. 304
DISC AISI304
BODY SEAT RING AISI304
IMPREGNATED BRAIDED
STEM PACKING ASBESTOS
TRIM NUMBER
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKETS
DESIGN CONDITIONS DESIGN CONDITIONS
Pressure rating ASME B16.34 Process condensate 6 150
Fluid Kg/cm 2 g oc Steam condensate 8 120
Dimineralized water 12 150 Phosphate 3 60
Potassium carbonate sol. 10 150 Instrument Air 10 70

NOTES:
1. This valve spec. shall be read in conjunction with technical notes for
valves.
2. Bidder shall clearly write all/any deviation against each part/material
of valve in the space provided for. Wherever bidder agrees with
POll's spec., bidder shall indicate "AGREED"
3. No cutting/overwriting by bidder on POll's spec. is allowed .
4. Testing shall be as per API 598-1996
5. Copper and copper alloys not permitted.
6. Gland shall be suitable for repacking under pressure when valve is
fully open.
7. If not otherwise stated the valves shall be full bore.

RATED Cv VALUES : +-10%)

SIZE I 2" I 3" I 4" I 6" 8" 10" 12.. I
Cv I so I 120 I 220 I 490 900 1400 21oo I
 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 46 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

PIPING
VALVE TAG NO.: PLV201 CLASS : STANDARD :
MFGRS CAT/FLG
STANDARD API 599-1994 RATING : 600#
SIZE RANGE 1/2"-1" ENDS : THREADED {NPT) RATING: ENDS :
CONSTRUCTION
BODY NON-LUBRICATED, FULL BORE
PLUG TAPER PLUG
WRENCH OPERATED YES
GEAR OPERATED NO
FIRE SAFE NO
DISC TYPE
GEAR OPERATED
BY PASS VALVE

MATERIALS
BODY A 105
PLUG A 105 CHROMEPLATED
BODY SEAT RING REINFORCED PTFE
DISC
BONNET
STEM PACKING PTFE
TRIM NUMBER
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKETS

DESIGN CONDITIONS DESIGN CONDITIONS

Pressure rating ASME B16.34
Fluid Kg/cm 2 g oc
Potassium carbonate
sol. 45 150

NOTES :
1.This valve spec. shall be read in conjunction with technical
notes for valves.

2. Bidder shall clearly write all/any deviation against each part

I material of valve in the space provided for, Wherever bidder
agrees with POll's spec. bidder shall indicate "AGREED"

3. No. cutting I overwriting by bidder on POll's spec. is allowed

4. Testing shall be as per AP1598-1996

5. Copper and copper alloys not permitted

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 47 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

PIPING
VALVE TAG NO. : PLV212 CLASS : STANDARD :
MFGRS CAT/FLG
STANDARD API 599-1994 RATING : 150#
SIZE RANGE 1.1/2"- 6" ENDS : RF RATING : ENDS :

CONSTRUCTION
BODY NON-LUBRICATED, FULL BORE
PLUG TAPER PLUG
WRENCH OPERATED 1.1/2"-4"
GEAR OPERATED 6"
FIRE SAFE NO
DISC TYPE

MATERIALS
BODY A 216 Gr. WCB
PLUG A 105/A216 Gr. WCB, CHROMEPLATED
BODY SEAT RING REINFORCED PTFE
DISC
BONNET
STEM PACKING PTFE
TRIM NUMBER
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKETS

DESIGN CONDITIONS DESIGN CONDITIONS

Pressure rating ASME B16.34
Fluid Kg/cm 2 g oc
Potassium carbonate
sol. 10 150

NOTES:
1.This valve spec. shall be read in conjunction with technical
notes for valves.

2. Bidder shall clearly write all/any deviation against each part

I material of valve in the space provided for, Wherever bidder
agrees with POll's spec. bidder shall indicate "AGREED"

3. No. cutting I overwriting by bidder on POll's spec. is allowed

4. Testing shall be as per API 598-1996

5. Copper and copper alloys not permitted

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 48 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

PIPING
VALVE TAG NO. : PLV501 CLASS : STANDARD :
MFGRS CAT/FLG
STANDARD API 599-1994 RATING : 600#
SIZE RANGE 1/2" - 1" ENDS : THREADED(NPT) RATING : ENDS :

CONSTRUCTION
BODY SHORT PATTERN, NON-LUBRICATED, FULL BORE
PLUG TAPER PLUG
WRENCH OPERATED YES
GEAR OPERATED NO
FIRE SAFE NO
DISC TYPE

MATERIALS
BODY AISI316
PLUG AISI316
BODY SEAT RING REINFORCED PTFE
DISC
BONNET
STEM PACKING PTFE
TRIM NUMBER
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKETS

DESIGN CONDITIONS DESIGN CONDITIONS

Pressure rating ASME B16.34
Fluid Kg/cm 2 g oc
Potassium carbonate
sol. 34 150

NOTES:
1.This valve spec. shall be read in conjunction with technical
notes for valves.

2. Bidder shall clearly write all/any deviation against each part

I material of valve in the space provided for, Wherever bidder
agrees with POll's spec. bidder shall indicate "AGREED"

3. No. cutting I overwriting by bidder on POll's spec. is allowed

4. Testing shall be as per API 598-1996

5. Copper and copper alloys not permitted

 9
lndianOil
PMS (Piping Material Specification) I VMS (Valve
Material Specification)
~
• L
Rev:O Page: 49 OF 49
IOCL, HALDIA Doc No: PC203-5111- PMSNMS-0051 POll, VADODARA
Vol :II Section:

VALVE SPECIFICATION MANUF'S OFFER

PIPING
VALVE TAG NO. : PLV510 CLASS : STANDARD :
MFGRS CAT/FLG
STANDARD API 599-1994 RATING : 150#
SIZE RANGE 1.1/2"- 6" ENDS : RF RATING : ENDS :

CONSTRUCTION
BODY SHORT PATTERN, NON-LUBRICATED, FULL BORE
PLUG TAPER PLUG
WRENCH OPERATED 1.1/2"-4"
GEAR OPERATED 6"
FIRE SAFE NO
DISC TYPE

MATERIALS
BODY A 351 Gr. CF8M
PLUG A 182 Gr. F316
BODY SEAT RING REINFORCED PTFE
DISC
BONNET
STEM PACKING PTFE
TRIM NUMBER
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKETS

DESIGN CONDITIONS DESIGN CONDITIONS

Pressure rating ASME B16.34
Fluid Kg/cm 2 g oc
Potassium carbonate
sol. 12 150

NOTES:
1.This valve spec. shall be read in conjunction with technical
notes for valves.

2. Bidder shall clearly write all/any deviation against each part

I material of valve in the space provided for, Wherever bidder
agrees with POll's spec. bidder shall indicate "AGREED"

3. No. cutting I overwriting by bidder on POll's spec. is allowed

4. Testing shall be as per API 598-1996

5. Copper and copper alloys not permitted