Catalogo Megalinear OK2012:Catalogo Megalinear 2012 20/06/12 12.

32 Pagina 94

COVER PROPERTIES

Megalinear belt can be coated with several materials. Those coatings are able to suit Megalinear belts to all applications. Main
advantages for using coated belts are: reducing noise and modifing friction in conveying materials. Choice of correct
coating depends on application field.
Megadyne is able to supply extruded coated belt, in this case coating method is same as belt production method and
coehesion between belt and cover is guaranteed by welding without using glue.
Properties of extruded coating are followings:

Cover type

NFB nylon NFT nylon AvAFC AvAFC AvAFC Foamed

APL Fishbone Ribbed
fabric back fabric teeth 60 70 85 polyurethane

Raw foamed polyurethane/

nylon nylon polyurethane polyurethane polyurethane polyurethane polyurethane
material polyurethane PVC

Hardness
– – 60 70 85 50 55 70 70
(ShA)

Colour green green transparent transparent transparent yellow/grey red transparent transparent

Coating and
belt cohesion by extrusion by extrusion by extrusion by extrusion by extrusion by spray by extrusion by extrusion by extrusion
method
Thickness
– – 2/3/4 2/3/4 2/3/4 0,5 till 8 3,5 4,3 2,7
range (mm)
Tolerance on
coating – – + /– 0,3 +/– 0,3 +/– 0,3 +/– 0,3 +/– 0,3 +/– 0,5 +/– 0,5
thickness

Working
temperature –20 +80 –20 +80 –20 +80 –20 +80 –20 +80 –20 +60 –20 +60 –20 +80 –20 +80
range (°C)
Friction
0,25 0,25 0,65 0,65 0,6 0,4 0,7 0,6 0,6
coefficient (1)
Water
good good very good very good very good good good very good very good
resistance
Abrasion
intermediate intermediate very good very good very good very good good very good very good
resistance
Oil
intermediate intermediate very good very good very good very good good very good very good
resistance
FDA
no no no no no no no no no
approved
Min. pulley
dia = std pulley std pulley x 40 x 40 x 40 x 25 x 30 x 30 x 35
thickness • ... (2)

(1) Static Average values for steel guides

(2) Suggested diameter is bigger value between this calculated value and minimum pulley diameter on belt data page

94
Catalogo Megalinear OK2012:Catalogo Megalinear 2012 20/06/12 12.32 Pagina 95

COVER PROPERTIES

Megalinear belt can be supplied also with vulcanised or glued cover. Their technical properties are listed in following table:

Cover type

PvC White Rubber Gummy

Porol Tenax Tenax
Supergrip Linatex for food Neoprene Correx ambra NBR HypalonHoneycomb
mousse 40 Standard
industry parablond

open cell
natural natural natural synthetic synthetic natural nitrilic natural
PVC neoprene rubber
rubber rubber rubber rubber rubber rubber rubber rubber
rubber

55 10 42 40 45 70 70 48 70 60 45

green black red red red white gray/black light brown white white red

by extrusion by by by by by by by by gluing
by gluing by gluing
vulcanization vulcanization vulcanization vulcanization vulcanization vulcanization vulcanization

4,5 2 till 15 0,8 till 15 0,8 till 15 0,8 till 15 0,8 till 15 0,8 till 15 0,8 till 15 0,8 till 15 0,8 till 15 4,5 till 15

+/– 0,5 +/– 0,3 +/– 0,3 +/– 0,3 +/– 0,3 +/– 0,3 +/– 0,3 +/– 0,3 +/– 0,3 +/– 0,3 +/– 0,5

–20 +60 –10 +60 –20 +50 –20 +60 –20 +60 0 +120 –10 +100 –20 +60 0 +120 0 +160 –20 +60

0,6 0,7 0,75 0,75 0,7 0,65 0,6 0,6 0,6 0,6 0,6

very
good good very good very good very good good very good very good good good
good
very
good intermediate very good very good very good intermediate good very good intermediate intermediate
good

good intermediate low low low good good low good good low

no no no no no no no no no no no

x 30 x 25 x 30 x 30 x 30 x 35 x 35 x 30 x 35 x 35 x 30

95