LM 4811

LM4811
www.ti.com SNAS119D – DECEMBER 2000 – REVISED APRIL 2013
LM4811 Dual 105mW Headphone Amplifier with Digital

Volume Control and Shutdown Mode
Check for Samples: LM4811
1FEATURES DESCRIPTION
2• Digital Volume Control Range from +12dB to The LM4811 is a dual audio power amplifier capable
−33dB of delivering 105mW per channel of continuous
average power into a 16Ω load with 0.1% (THD+N)
• WSON and VSSOP Surface Mount Packaging from a 5V power supply.
• "Click and Pop" Suppression Circuitry
Boomer audio power amplifiers were designed
• No Bootstrap Capacitors Required specifically to provide high quality output power with a
• Low Shutdown Current minimal amount of external components. Since the
LM4811 does not require bootstrap capacitors or
APPLICATIONS snubber networks, it is optimally suited for low-power
portable systems.
• Cellular Phones
The LM4811 features a digital volume control that
• MP3, CD, DVD Players
sets the amplifier's gain from +12dB to −33dB in 16
• PDA's discrete steps using a two−wire interface.
• Portable Electronics
The unity-gain stable LM4811 also features an
externally controlled, active-high, micropower
KEY SPECIFICATIONS consumption shutdown mode. It also has an internal
• THD+N at 1kHz, 105mW Continuous Average thermal shutdown protection mechanism.
Output Power into 16Ω 0.1 % (typ)
• THD+N at 1kHz, 70mW Continuous Average
Power into 32Ω 0.1 % (typ)
• Shutdown Current 0.3 μA (typ)
Connection Diagrams
Top View Top View
Figure 1. VSSOP Package Figure 2. WSON Package

See Package Number DGS0010A See Package Number NGY0010A
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2 All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Copyright © 2000–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
LM4811
SNAS119D – DECEMBER 2000 – REVISED APRIL 2013 www.ti.com
Top View
Figure 3. SON Package

See Package Number NHD0010A
Typical Application
*Refer to Application Information for information concerning proper selection of the input and output coupling
capacitors.
Figure 4. Typical Audio Amplifier Application Circuit
2 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LM4811

LM4811
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
(1) (2)
Absolute Maximum Ratings
Supply Voltage 6.0V
Storage Temperature −65°C to +150°C
(3)
ESD Susceptibility 2.5kV
(4)
ESD Susceptibility Machine model 200V
Junction Temperature (TJ) 150°C
Vapor Phase (60 sec.) 215°C
Soldering Information DGS0010A Package Infrared (15 sec.) 220°C
θJA DGS0010A 194°C/W
θJC DGS0010A 52°C/W
(5)
θJA NGY0010A 63°C/W
Thermal Resistance
θJC NGY0010A (5) 12°C/W
(5)
θJA NHD0010A 63°C/W
(5)
θJC NHD0010A 12°C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Human body model, 100pF discharged through a 1.5kΩ resistor.
(4) Machine Model ESD test is covered by specification EIAJ IC-121-1981. A 200pF cap is charged to the specified voltage, then
discharged directly into the IC with no external series resistor (resistance of discharge path must be under 50 Ohms).
(5) The NGY0010A or NHD0010A package has its Exposed−DAP soldered to an exposed 2in2 area of 1oz printed circuit board copper.
Operating Ratings
Temperature Range TMIN ≤ TA ≤ TMAX −40°C ≤ T A ≤ 85°C
Supply Voltage 2.0V ≤ VCC ≤ 5.5V
(1) (2)
Electrical Characteristics
The following specifications apply for VDD = 5V unless otherwise specified, limits apply to TA = 25°C.
LM4811 Units
Parameter Test Conditions
Typ (3) Limit (4) (Limits)
VDD Supply Voltage 2.0 V (min)
5.5 V (max)
IDD Supply Current VIN = 0V, IO = 0A 1.3 3.0 mA
ISD Shutdown Current VIN = 0V 0.3 µA
VOS Output Offset Voltage VIN = 0V 4.0 50 mV
PO Output Power 0.1% THD+N; f = 1kHz
RL = 16Ω 105 mW
RL = 32Ω 70 mW
THD+N Total Harmonic Distortion PO = 50mW, RL = 32Ω 0.3 %
f = 20Hz to 20kHz
Crosstalk Channel Separation RL = 32Ω; f = 1kHz; 100 dB
PO = 70mW
PSRR Power Supply Rejection Ratio CB = 1.0µF, VRIPPLE = 100mVPP 60 dB
f = 217Hz
VIH (CLOCK, UP/DN, SHUTDOWN) 1.4 V (min)
Input Voltage High
(2) All voltages are measured with respect to the ground pin, unless otherwise specified.
(3) Typical specifications are specified at +25°C and represent the most likely parametric norm.
(4) Tested limits are ensured to TI's AOQL (Average Outgoing Quality Level). Datasheet min/max specification limits are ensured by design,
test, or statistical analysis.
Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
LM4811
Electrical Characteristics (1)(2) (continued)

The following specifications apply for VDD = 5V unless otherwise specified, limits apply to TA = 25°C.
LM4811 Units
Typ (3)
Limit (4) (Limits)
VIL (CLOCK, UP/DN, SHUTDOWN) 0.4 V (max)
Input Voltage Low
Digital Volume Range Input referred minimum gain −33 dB
Input referred maximum gain +12 dB
Digital Volume Stepsize All 16 discrete steps 3.0 dB
Stepsize Error All 16 discrete steps ±0.3 dB
Channel−to−Channel Volume All gain settings from 0.15 dB
Tracking Error −33dB to +12dB
Shutdown Attenuation Shutdown mode active −100 dB
(1) (2)
The following specifications apply for VDD = 3.3V unless otherwise specified, limits apply to TA = 25°C.
LM4811 Units
Typ (3) Limit (4) (Limits)
IDD Supply Current VIN = 0V, IO = 0A 1.1 mA
VOS Output Offset Voltage VIN = 0V 4.0 mV
Po Output Power 0.1% THD+N; f = 1kHz
RL = 16Ω 40 mW
RL = 32Ω 28 mW
f = 20Hz to 20kHz
f = 217Hz
Input Voltage High
Input Voltage Low

LM4811
(1) (2)
The following specifications apply for VDD = 2.6V unless otherwise specified, limits apply to TA = 25°C.
LM4811 Units
Typ (3)
Limit (4) (Limits)
IDD Supply Current VIN = 0V, IO = 0A 1.0 mA
VOS Output Offset Voltage VIN = 0V 4.0 mV
Po Output Power 0.1% THD+N; f = 1kHz
RL = 16Ω 20 mW
RL = 32Ω 16 mW
f = 20Hz to 20kHz
f = 217Hz
Input Voltage High
Input Voltage Low
External Components Description
Components Functional Description (See Figure 4)

This is the input coupling capacitor. It blocks the DC voltage at, and couples the input signal to, the amplifier's input
terminals. Ci also creates a highpass filter with the internal input resistor, Ri, at fc = 1/(2πRiCi). The minimum value of Ri is
1. Ci
33kΩ. Refer to PROPER SELECTION OF EXTERNAL COMPONENTS for an explanation of how to determine the value of
Ci.
This is the supply bypass capacitor. It provides power supply filtering. Refer to Application Information for proper placement
2. CS
and selection of the supply bypass capacitor.
This is the BYPASS pin capacitor. It provides half-supply filtering. Refer to PROPER SELECTION OF EXTERNAL
3. CB
COMPONENTS for information concerning proper placement and selection of CB.
This is the output coupling capacitor. It blocks the DC voltage at the amplifier's output and it forms a high pass filter with RL
4. CO
at fO = 1/(2πR LCO)

LM4811
Typical Performance Characteristics

THD+N THD+N
vs vs
Frequency Frequency
Figure 5. Figure 6.
THD+N THD+N
vs vs
Frequency Frequency
Figure 7. Figure 8.
THD+N THD+N
vs vs
Frequency Frequency
Figure 9. Figure 10.

LM4811
Typical Performance Characteristics (continued)

THD+N THD+N
vs vs
Frequency Frequency
THD+N THD+N
vs vs
Frequency Output Power
THD+N THD+N
vs vs
Output Power Output Power

LM4811

THD+N THD+N
vs vs
THD+N THD+N
vs vs
THD+N THD+N
vs vs

LM4811

Output Power vs Output Power vs
Load Resistance Load Resistance

Load Resistance Supply Voltage

Power Supply Power Supply

LM4811

Dropout Voltage vs Power Dissipation vs
Supply Voltage Output Power
Power Dissipation vs Power Dissipation vs

Channel Separation Channel Separation

LM4811

Noise Floor Power Supply Rejection Ratio
Power Supply Rejection Ratio Power Supply Rejection Ratio
Supply Current vs
Frequency Response Supply Voltage

LM4811
APPLICATION INFORMATION
DIGITAL VOLUME CONTROL

The LM4811's gain is controlled by the signals applied to the CLOCK and UP/DN inputs. An external clock is
required to drive the CLOCK pin. At each rising edge of the clock signal, the gain will either increase or decrease
by a 3dB step depending on the logic voltage level applied to the UP/DN pin. A logic high voltage level applied to
the UP/DN pin causes the gain to increase by 3dB at each rising edge of the clock signal. Conversely, a logic
low voltage level applied to the UP/DN pin causes the gain to decrease 3dB at each rising edge of the clock
signal. For both the CLOCK and UP/DN inputs, the trigger point is 1.4V minimum for a logic high level, and 0.4V
maximum for a logic low level.
There are 16 discrete gain settings ranging from +12dB maximum to −33dB minimum. Upon device power on,
the amplifier's gain is set to a default value of 0dB. However, when coming out of shutdown mode, the LM4811
will revert back to its previous gain setting.
The LM4811's CLOCK and UP/DN pins should be debounced in order to avoid unwanted state changes during
transitions between VIL and VIH. This will ensure correct operation of the digital volume control. A microcontroller
or microprocessor output is recommended to drive the CLOCK and UP/DN pins.
Figure 41. Timing Diagram
POWER DISSIPATION
Power dissipation is a major concern when using any power amplifier and must be thoroughly understood to
ensure a successful design. Equation 1 states the maximum power dissipation point for a single-ended amplifier
operating at a given supply voltage and driving a specified output load.
PDMAX = (VDD) 2 / (2π2RL) (1)
Since the LM4811 has two operational amplifiers in one package, the maximum internal power dissipation point
is twice that of the number which results from Equation 1. Even with the large internal power dissipation, the
LM4811 does not require heat sinking over a large range of ambient temperature. From Equation 1, assuming a
5V power supply and a 32Ω load, the maximum power dissipation point is 40mW per amplifier. Thus the
maximum package dissipation point is 80mW. The maximum power dissipation point obtained must not be
greater than the power dissipation predicted by Equation 2:
PDMAX = (TJMAX − TA) / θJA (2)

LM4811
For the VSSOP package, θJA = 194°C/W, and for the WSON/SON package, θJA = 63°C/W. TJMAX = 150°C for the
LM4811. For a given ambient temperature, TA, of the system surroundings, Equation 1 can be used to find the
maximum internal power dissipation supported by the IC packaging. If the result of Equation 1 is greater than
that of Equation 2, then either the supply voltage must be decreased, the load impedance increased, or TA
reduced. For the VSSOP package in a typical application of a 5V power supply and a 32Ω load, the maximum
ambient temperature possible without violating the maximum junction temperature is approximately 134.5°C. This
assumes the device operates at maximum power dissipation and uses surface mount packaging. Internal power
dissipation is a function of output power. If typical operation is not around the maximum power dissipation point,
operation at higher ambient temperatures is possible. Refer to Typical Performance Characteristics for power
dissipation information for lower output power levels.
EXPOSED-DAP PACKAGE PCB MOUNTING CONSIDERATION

The LM4811's exposed-dap (die attach paddle) package (WSON/SON) provides a low thermal resistance
between the die and the PCB to which the part is mounted and soldered. This allows rapid heat transfer from the
die to the surrounding PCB copper traces, ground plane, and surrounding air.
The WSON/SON package should have its DAP soldered to a copper pad on the PCB. The DAP's PCB copper
pad may be connected to a large plane of continuous unbroken copper. This plane forms a thermal mass, heat
sink, and radiation area.
However, since the LM4811 is designed for headphone applications, connecting a copper plane to the DAP's
PCB copper pad is not required. Figure 32 in Typical Performance Characteristics shows that the maximum
power dissipated is just 45mW per amplifier with a 5V power supply and a 32Ω load.
Further detailed and specific information concerning PCB layout, fabrication, and mounting an WSON/SON
package is available from Texas Instruments' Package Engineering Group under application note AN1187.
POWER SUPPLY BYPASSING

As with any power amplifier, proper supply bypassing is critical for low noise performance and high power supply
rejection. The capacitor location on both the bypass and power supply pins should be as close to the device as
possible. The value of the bypass capacitor directly affects the LM4811's half-supply voltage stability and PSRR.
The stability and supply rejection increase as the bypass capacitor's value increases. Typical applications employ
a 5V regulator with 10µF and a 0.1µF bypass capacitors which aid in supply stability, but do not eliminate the
need for bypassing the supply nodes of the LM4811. The selection of bypass capacitors, especially CB, is thus
dependent upon desired low frequency PSRR, click and pop performance, (explained in PROPER SELECTION
OF EXTERNAL COMPONENTS), system cost, and size constraints.
SHUTDOWN FUNCTION
In order to reduce power consumption while not is use, the LM4811 features amplifier bias circuitry shutdown.
This shutdown function is activated by applying a logic high to the SHUTDOWN pin. The trigger point is 1.4V
minimum for a logic high level, and 0.4V maximum for a logic low level. It is best to switch between ground and
VDD to ensure optimal shutdown operation. By switching the SHUTDOWN pin to VDD, the LM4811 supply current
draw will be minimized in idle mode. Whereas the device will be disabled with shutdown voltages less than VDD,
the idle current may be greater than the typical value of 0.3µA. In either case, the SHUTDOWN pin should be
tied to a fixed voltage to avoid unwanted state changes.
In many applications, a microcontroller or microprocessor output is used to control the shutdown circuitry. This
provides a quick, smooth shutdown transition. Another solution is to use a single-pole, single-throw switch in
conjunction with an external pull-up resistor. When the switch is closed, the SHUTDOWN pin is connected to
ground and enables the amplifier. If the switch is open, the external pull-up resistor, RPU, will disable the LM4811.
This scheme ensures that the SHUTDOWN pin will not float, thus preventing unwanted state changes.
PROPER SELECTION OF EXTERNAL COMPONENTS

Selection of external components when using integrated power amplifiers is critical for optimum device and
system performance. While the LM4811 is tolerant of external component combinations, consideration must be
given to the external component values that maximize overall system quality.

LM4811
The LM4811's unity-gain stability allows a designer to maximize system performance. Low gain settings
maximize signal-to-noise performance and minimizes THD+N. Low gain configurations require large input signals
to obtain a given output power. Input signals equal to or greater than 1 Vrms are available from sources such as
audio codecs. Please refer to AUDIO POWER AMPLIFIER DESIGN for a more complete explanation of proper
gain selection.
Selection of Input and Output Capacitor Size

Besides gain, one of the major considerations is the closed loop bandwidth of the amplifier. To a large extent, the
bandwidth is dicated by the choice of external components shown in Figure 4. Both the input coupling capacitor,
Ci, and the output coupling capacitor, Co, form first order high pass filters which limit low frequency response.
These values should be based on the desired frequency response weighed against the following:
Large value input and output capacitors are both expensive and space consuming for portable designs. Clearly a
certain sized capacitor is needed to couple in low frequencies without severe attenuation. But in many cases the
speakers used in portable systems, whether internal or external, have little ability to reproduce signals below
150Hz. Thus large input and output capacitors may not increase system performance.
In addition to system cost and size, click and pop performance is affected by the size of the input coupling
capacitor, Ci. A larger input coupling capacitor requires more charge to reach its quiescent DC voltage (nominally
1/2 VDD). This charge comes from the output via the feedback and is apt to create pops upon device enable.
Turn on pops can be minimized by reducing Ci value based on necessary low frequency response.
Besides minimizing the input and output capacitor values, careful consideration should be paid to the bypass
capacitor value. Bypass capacitor CB is the most critical component to minimize turn on pops since it determines
how fast the LM4811 turns on. The slower the LM4811's outputs ramp to their quiescent DC voltage (nominally
1/2 VDD), the smaller the turn on pop. While the device will function properly, (no oscillations or motorboating),
with CB equal to 1µF, the device will be much more susceptible to turn on clicks and pops. Thus, a value of CB
equal to 1µF or larger is recommended in all but the most cost sensitive designs.
Also, careful consideration must be taken in selecting a certain type of capacitor to be used in the system.
Different types of capacitors (tantalum, electrolytic, ceramic) have unique performance characteristics and may
affect overall system performance.
AUDIO POWER AMPLIFIER DESIGN
Design a Dual 70mW/32Ω Audio Amplifier
Given:
Power Output 70mW
Load Impedance 32Ω
Input Level 1Vrms (max)
Input Impedance 33kΩ (min)
Bandwidth 100 Hz–20 kHz ± 0.50dB
A designer must first determine the minimum supply rail to obtain the specified output power. By extrapolating
from Figure 26 in Typical Performance Characteristics, the supply rail can be easily found. A second way to
determine the minimum supply rail is to calculate the required VOPEAK using Equation 3 and add the dropout
voltage. For a single-ended application, the minimum supply voltage can be approximated by (2VOPEAK + (VODTOP
+ VODBOT)), where VODBOT and VODTOP are extrapolated from Figure 29 in Typical Performance Characteristics.
(3)

LM4811
Using Figure 28 for a 32Ω load, the minimum supply rail is 4.8V. Since 5V is a standard supply voltage in most
applications, it is chosen for the supply rail. Extra supply voltage creates headroom that allows the LM4811 to
reproduce peaks in excess of 70mW without clipping the signal. At this time, the designer must make sure that
the power supply choice along with the output impedance does not violate the conditions explained in POWER
DISSIPATION. Remember that the maximum power dissipation point from Equation 1 must be multiplied by two
since there are two independent amplifiers inside the package.
The final design step is to address the bandwidth requirements which must be stated as a pair of −3dB
frequency points. Five times away from a −3dB point is 0.17dB down from passband response assuming a single
pole roll-off. As stated in External Components Description, Ci and Co create first order highpass filters. Thus to
obtain the desired frequency low response of 100Hz within ±0.5dB, both poles must be taken into consideration.
The combination of two single order filters at the same frequency forms a second order response. This results in
a signal which is down 0.34dB at five times away from the single order filter −3dB point. Thus, a frequency of
20Hz is used in the following equations to ensure that the response is better than 0.5dB down at 100Hz.
Ci ≥ 1 / (2π * 33 kΩ * 20 Hz) = 0.241µF; use 0.39µF. (4)
Co ≥ 1 / (2π * 32Ω * 20 Hz) = 249µF; use 330µF. (5)
The high frequency pole is determined by the product of the desired high frequency pole, fH, and the closed-loop
gain, AV. With a closed-loop gain of 3.98 or +12dB and fH = 100kHz, the resulting GBWP = 398kHz which is
much smaller than the LM4811 GBWP of 1MHz. This figure displays that at the maximum gain setting of 3.98 or
+12dB, the LM4811 can be used without running into bandwidth limitations.

LM4811
Figure 42. Demo Board Schematic
Figure 43. Recommended VSSOP PC Board Layout:

TOP Silk Screen

LM4811

TOP Top Layer

Bottom Layer
Figure 46. Recommended WSON/SON PC Board Layout:

TOP Silk Screen

LM4811

TOP Top Layer

Bottom Layer

LM4811
REVISION HISTORY
Rev Date Description
0.1 04/06/06 Added NHD0010A Package and markings,
then re-released D/S to the WEB (per Alvin
F.).
D 04/05/13 Changed layout of National Data Sheet to TI
format.

PACKAGE OPTION ADDENDUM
www.ti.com 26-Aug-2013
PACKAGING INFORMATION
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (3) (4/5)
LM4811MM/NOPB ACTIVE VSSOP DGS 10 1000 Green (RoHS CU SN Level-1-260C-UNLIM -40 to 85 G11
& no Sb/Br)
LM4811MMX/NOPB ACTIVE VSSOP DGS 10 3500 Green (RoHS CU SN Level-1-260C-UNLIM -40 to 85 G11
& no Sb/Br)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
TAPE AND REEL INFORMATION
*All dimensions are nominal

Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1
Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LM4811MM/NOPB VSSOP DGS 10 1000 178.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
LM4811MMX/NOPB VSSOP DGS 10 3500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
*All dimensions are nominal

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM4811MM/NOPB VSSOP DGS 10 1000 210.0 185.0 35.0
LM4811MMX/NOPB VSSOP DGS 10 3500 367.0 367.0 35.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated

LM 4811

Uploaded by

Copyright:

Available Formats

LM 4811

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

LM 4811

Uploaded by

Copyright:

Available Formats

LM4811

www.ti.com SNAS119D – DECEMBER 2000 – REVISED APRIL 2013

LM4811 Dual 105mW Headphone Amplifier with Digital

Top View Top View

Figure 1. VSSOP Package Figure 2. WSON Package

Figure 3. SON Package

Figure 4. Typical Audio Amplifier Application Circuit

2 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated

Product Folder Links: LM4811

Electrical Characteristics (1)(2) (continued)

4 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated

Product Folder Links: LM4811

Components Functional Description (See Figure 4)

Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 5

Typical Performance Characteristics

Figure 9. Figure 10.

6 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated

Product Folder Links: LM4811

Typical Performance Characteristics (continued)

Figure 11. Figure 12.

Figure 13. Figure 14.

Figure 15. Figure 16.

Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 7

Typical Performance Characteristics (continued)

Figure 17. Figure 18.

Figure 19. Figure 20.

Figure 21. Figure 22.

8 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated

Product Folder Links: LM4811

Typical Performance Characteristics (continued)

Figure 23. Figure 24.

Output Power vs Output Power vs

Figure 25. Figure 26.

Output Power vs Output Power vs

Figure 27. Figure 28.

Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 9

Typical Performance Characteristics (continued)

Figure 29. Figure 30.

Power Dissipation vs Power Dissipation vs

Figure 31. Figure 32.

Channel Separation Channel Separation

Figure 33. Figure 34.

10 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated

Product Folder Links: LM4811

Typical Performance Characteristics (continued)

Figure 35. Figure 36.

Power Supply Rejection Ratio Power Supply Rejection Ratio

Figure 37. Figure 38.

Figure 39. Figure 40.

Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 11

DIGITAL VOLUME CONTROL

Figure 41. Timing Diagram

PDMAX = (VDD) 2 / (2π2RL) (1)

PDMAX = (TJMAX − TA) / θJA (2)

12 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated

Product Folder Links: LM4811

EXPOSED-DAP PACKAGE PCB MOUNTING CONSIDERATION

POWER SUPPLY BYPASSING

PROPER SELECTION OF EXTERNAL COMPONENTS