Photo IC for optical link

S13174-01SR

Receiver photo IC for DC to 10 Mbps optical link

The S13174-01SR is a receiver photo IC for plastic optical fiber (POF) communication. It has monolithically integrated PIN
photodiode and signal processing circuit. It features small size and strong resistance to electromagnetic induction noise.
High-speed optical communication is possible over a wide range from DC up to 10 Mbps. It provides CMOS-compatible digital
output.

Features Applications

Receiver photo IC Data transmission in harsh, noisy environments,

DC to 10 Mbps data communications such as in FA, OA, and digital audio
Monolithic photo IC featuring strong resistance to High-speed, short-distance data transmission
electromagnetic induction noise Highly bursty data transmission
Digital output (CMOS)

Absolute maximum ratings (Ta=25 °C, unless otherwise noted)

Parameter Symbol Condition Value Unit
Supply voltage Vcc -0.5 to +4.0 V
Output voltage Vo -0.5 to Vcc + 0.5 V
Power dissipation*1 Pmax 250 mW
Operating temperature Topr No dew condensation*2 -20 to +85 °C
Storage temperature Tstg No dew condensation*2 -40 to +85 °C
Soldering conditions Tsol 230 °C, within 5 s, at least 1.5 mm away from lead roots -
*1: Power dissipation decreases at a rate of 1.75 mW/°C above Ta=25 °C.
*2: W
 hen there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation
may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability.
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.

Recommended operating conditions

Parameter Symbol Min. Typ. Max. Unit
Supply voltage Vcc 3.135 3.3 3.465 V
High level output current Ioh -4 - 0
mA
Low level output current Iol 0 - 4

www.hamamatsu.com 1
 Photo IC for optical link S13174-01SR

Electrical and optical characteristics (Ta=25 °C, Vcc=3.135 to 3.465 V, unless otherwise noted)
Parameter Symbol Condition Min. Typ. Max. Unit
Biphase signal
Data rate fD DC - 10 Mbps
(NRZ conversion)
Current consumption Icc No optical input - - 40 mA
Maximum reception level Pi max Peak value*3 0 - - dBm
Minimum reception level Pi min Peak value, Pe=10-7*3 - - -24 dBm
High level output voltage
Input light waveform Voh Ioh=-150 µA 2.7 - - V
Low level output voltage Vol Iol=1.6 mA - - 0.4 V
Output voltage
Rise time tr 20% to 80%*4 *5 - - 20 ns
Fall time tf 20% to 80%*4 *5 - - 20 ns
Pulse width distortion ∆t *3 *4 *5 -25 - +25 ns
Jitter ∆tj *3 *4 *5 - - 20 ns
*3: A signal generated by a Hamamatsu’s standard signal generator is assumed for the optical input signal.
*4: For the input signal, a 10 Mbps pseudo-random biphase signal is assumed.
*5: CL=5 pF (including parasitic capacitance of probe, connector, and printed circuit board)

TPLH TPHL
Input light Parameter Symbol Measurement method
50%
waveform Set the trigger to PPG CLK, and measure
Input light Rising edge jitter ∆tjr
T1 50% the jitter in the rising edge of the output.
waveform
agram Set the trigger to PPG CLK, and measure
tr tf Falling edge jitter ∆tjf
80% the jitter in the falling edge of the output.
Output Output
50% 50% Jitter ∆tj Set Δtj to the larger of the two jitter values: Δtjr and Δtjf.
waveform waveform
20%
T2 ∆tjr ∆tjf
∆T=T2 - T
KPICC0250EA

Note: Connect a 0.1 μF bypass capacitor within 3 mm of this element’s lead (between Vcc and GND). In addition, connect a 10 μF capacitor.
∙A
 lign the center axes of the fiber and package lens, and make the gap between the fiber and the optical reference plane of the lens
surface 0.1 mm.

Block diagram
KPICC0250EA

Vcc

Vout

GND

KPICC0304EA

KPICC0304EA
 Photo IC for optical link S13174-01SR

Connection example

Vout R1
1
GND
2
C1 C2 C3
3
L1
4
Vcc

Dimensional outline (S13174-01SR, unit: mm)

KPICC0305EA

Dimensional outline (unit: mm)

1.77
5.2 ± 0.3
0.97
(including burr)
5.0 (4 ×) R0.3 max. 0.69
10°
10°
(including burr)

Pin no. S13174-01SR

1.4

ɸ1.8
4.5 ± 0.3

Vout
4.3

GND
4.3

A
(1.5) (2.15)

KPICC0305EA Vcc
ɸ1.0 depth 0.15 max. (0.9)

Vcc
ɸ2.0 depth 0.15 max.

(4 ×) 0.5 Tolerance unless otherwise noted: ±0.1, ±2°

(4×) 0.4 Shaded area indicates burr.
Values in parentheses indicate reference values.
9.0 ± 0.7

Standard packing type

Plastic tray (100 pcs/tray)
(2×)

Material: PVC (conductive)

(4×) 0.25

1.27 1.27 1.27

(specified at lead root)
ɸ0.2
ɸ1.24

0.66
ɸ1.8

(0.9)
10° (0.9) 0.25

Enlarged view of A
10°

5.0
KPICA0105EA

3
 Photo IC for optical link S13174-01SR

Related information
www.hamamatsu.com/sp/ssd/doc_en.html

Precautions
∙ Disclaimer
∙ Metal, ceramic, plastic products

Information described in this material is current as of July 2018.

Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the
information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always
contact us for the delivery specification sheet to check the latest specifications.
The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use.
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.

www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218, E-mail: usa@hamamatsu.com
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8, E-mail: info@hamamatsu.de
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10, E-mail: infos@hamamatsu.fr
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777, E-mail: info@hamamatsu.co.uk
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46)8-509 031 00, Fax: (46)8-509 031 01, E-mail: info@hamamatsu.se
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93 58 17 33, Fax: (39)02-93 58 17 41, E-mail: info@hamamatsu.it
China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866, E-mail: hpc@hamamatsu.com.cn
Taiwan: Hamamatsu Photonics Taiwan Co., Ltd.: 8F-3, No. 158, Section2, Gongdao 5th Road, East District, Hsinchu, 300, Taiwan R.O.C. Telephone: (886)03-659-0080, Fax: (886)03-659-0081, E-mail: info@hamamatsu.com.tw
4
Cat. No. KPIC1101E01 Jul. 2018 DN