8M15B

DATA SHEET
www.onsemi.com
500 mA Positive Voltage

Regulators
4
MC78M00, MC78M00A,
NCV78M00 Series 1 2
3
1
2
3
Description
DPAK−3 TO−220
The MC78M00/MC78M00A Series positive voltage regulators are
DT SUFFIX T SUFFIX
identical to the popular MC7800 Series devices, except that they are CASE 369C CASE 221AB
specified for only half the output current. Like the MC7800 devices,
the MC78M00 three−terminal regulators are intended for local,
on−card voltage regulation.
MARKINGDIAGRAMS
Internal current limiting, thermal shutdown circuitry and safe−area
compensation for the internal pass transistor combine to make these
devices remarkably rugged under most operating conditions.
Maximum output current, with adequate heatsinking is 500 mA.
MC
xxxxxG
Features ALYWW
78MxxXXT
• No External Components Required AWLYWWG
• Internal Thermal Overload Protection

• Internal Short Circuit Current Limiting
• Output Transistor Safe−Area Compensation
• MC78M00A High Accuracy (±2%) Heatsink surface
Available for 5.0 V, 8.0 V, 12 V and 15 V connected to Pin 2.
xx = Voltage Option
• NCV Prefix for Automotive and Other Applications Requiring
XX = Appropriate Suffix Options
Unique Site and Control Change Requirements; AEC−Q100 A = Assembly Location
Qualified and PPAP Capable WL = Wafer Lot
• These are Pb−Free Devices Y = Year
WW = Work Week
G = Pb−Free Package
Input
1.0 k 1.0 k
210 Heatsink surface (shown as terminal 4 in
case outline drawing) is connected to Pin 2.
6.7
V 16 k xxxxx = Device Type and Voltage Option Code
100
A = Assembly Location
300 1.0 k 200 L = Wafer Lot
Y = Year
3.6
k 3.0 k WW = Work Week
300 G = Pb−Free Package
10 pF
6.4
k 5.6 k
0.24 Pin 1. Input
13 2. Ground
3. Output
50 200
520
Output
40
pF
6.0 k ORDERING INFORMATION
2.6 k
See detailed ordering and shipping information in the package

2.0 k 3.9 k dimensions section on page 10−14 of this data sheet.
DEVICE MARKING INFORMATION

6.0 2.8 k
GND See general marking information in the device marking
k
section on page 10 of this data sheet.
This device contains 28 active transistors.
Figure 1. Representative Schematic Diagram
© Semiconductor Components Industries, LLC, 2016 1 Publication Order Number:

November, 2021 − Rev. 29 MC78M00/D
MC78M00, MC78M00A, NCV78M00 Series
MAXIMUM RATINGS (TA = 25°C, unless otherwise noted) (Note 1)

Rating Symbol Value Unit
Input Voltage VI Vdc
(5.0 V−18 V) 35
(20 V−24V) 40
Power Dissipation (Package Limitation) °C/W
Plastic Package, T Suffix
TA = 25°C PD Internally Limited
Thermal Resistance, Junction-to-Air qJA 70
Thermal Resistance, Junction-to-Case qJC 5.0
Plastic Package, DT Suffix
TA = 25°C PD Internally Limited
Thermal Resistance, Junction-to-Air qJA 92
Thermal Resistance, Junction-to-Case qJC 5.0
Operating Junction Temperature Range TJ +150 °C
Storage Temperature Range Tstg −65 to +150 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. This device series contains ESD protection and exceeds the following tests:
Human Body Model 2000 V per MIL−STD−883, Method 3015.
Machine Model Method 200 V.
MC78M05C/AC/B/AB, NCV78M05AB/B ELECTRICAL CHARACTERISTICS

(VI = 10 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W, unless otherwise noted) (Note 2)
Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = 25°C) VO Vdc
MC78M05B/MC78M05C/NCV78M05B 4.8 5.0 5.2
MC78M05AB/MC78M05AC/NCV78M05AB 4.9 5.0 5.1
Output Voltage Variation (7.0 Vdc ≤ VI ≤ 20 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO Vdc
MC78M05B/MC78M05C/NCV78M05B 4.75 − 5.25
MC78M05AB/MC78M05AC/NCV78M05AB 4.80 − 5.20
Line Regulation (TJ = 25°C, 7.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Regline − 3.0 50 mV
Load Regulation Regload mV
(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 20 100
(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 50
Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA
Quiescent Current Change DIIB mA
(8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8
(5.0 mA ≤ IO ≤ 350 mA) − − 0.5
Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 40 − mV
Ripple Rejection RR dB
(IO = 100 mA, f = 120 Hz, 8.0 V ≤ VI ≤ 18 V) 62 − −
(IO = 300 mA, f = 120 Hz, 8.0 ≤ VI ≤ 18 V, TJ = 25°C) 62 80 −
Dropout Voltage (TJ = 25°C) VI−VO − 2.0 − Vdc
Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 350 − mA
Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) DVO/DT − ±0.2 − mV/°C
Peak Output Current (TJ = 25°C) IO − 700 − mA
2. Tlow = 0°C for MC78MxxAC, C
= −40°C for MC78MxxAB, B, NCV78MxxAB, B
Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B
www.onsemi.com
2
MC78M06C/B ELECTRICAL CHARACTERISTICS

(VI = 11 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 3)

Output Voltage (TJ = 25°C) VO 5.75 6.0 6.25 Vdc
Output Voltage Variation (8.0 Vdc ≤ VI ≤ 21 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 5.7 − 6.3 Vdc
(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 Ma) − 20 120
(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 60
(9.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8
(5.0 mA ≤ IO ≤ 350 mA) − − 0.5
(IO = 100 mA, f = 120 Hz, 9.0 V ≤ VI ≤ 19 V) 59 − −
(IO = 300 mA, f = 120 Hz, 9.0 V ≤ VI ≤ 19 V, TJ = 25°C) 59 80 −
Dropout Voltage (TJ = 25°C) VI − VO − 2.0 − Vdc
MC78M08C/AC/B/AB, NCV78M08B ELECTRICAL CHARACTERISTICS


MC78M08B/MC78M08C/NCV78M08B 7.70 8.0 8.30
MC78M08AB/MC78M08AC 7.84 8.0 8.16
MC78M08B/MC78M08C/NCV78M08B 7.6 − 8.4
MC78M08AB/MC78M08AC 7.7 − 8.3
(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 25 160
(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 80
(10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8
(5.0 mA ≤ IO ≤ 350 mA) − − 0.5
(IO = 100 mA, f = 120 Hz, 11.5 V ≤VI ≤ 21.5 V) 56 − −
(IO = 300 mA, f = 120 Hz, 11.5 V ≤VI ≤ 21.5 V, TJ = 25°C) 56 80 −
www.onsemi.com
3
MC78M09C/B, NCV78M09B ELECTRICAL CHARACTERISTICS

Output Voltage (TJ = 25°C) VO 8.64 9.0 9.45 Vdc
Output Voltage Variation (11.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 8.55 − 9.45 Vdc
(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 25 180
(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 90
(11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8
(5.0 mA ≤ IO ≤ 350 mA) − − 0.5
(IO = 100 mA, f = 120 Hz, 12.5 V ≤VI ≤ 22.5 V) 56 − −
(IO = 300 mA, f = 120 Hz, 12.5 V ≤VI ≤ 22.5 V, TJ = 25°C) 56 80 −

MC78M12B/MC78M12C/NCV78M12B 11.50 12 12.50
MC78M12AB/MC78M12AC 11.76 12 12.24
MC78M12B/MC78M12C/NCV78M12B 11.4 − 12.6
MC78M12AB/MC78M12AC 11.5 − 12.5
(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 25 240
(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 120
(14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) − − 0.8
(5.0 mA ≤ IO ≤ 350 mA) − − 0.5
(IO = 100 mA, f = 120 Hz, 15 V ≤VI ≤ 25 V) 55 − −
(IO = 300 mA, f = 120 Hz, 15 V ≤VI ≤ 25 V, TJ = 25°C) 55 80 −
www.onsemi.com
4

MC78M15B/MC78M15C/NCV78M15B 14.4 15 15.6
MC78M15AB/MC78M15AC 14.7 15 15.3
MC78M15B/MC78M15C/NCV78M15B 14.25 − 15.75
MC78M15AB/MC78M15AC 14.40 − 15.60
Input Regulation (TJ = 25°C, 17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) Regline − 10 50 mV
(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 25 300
(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 150
(17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) − − 0.8
(5.0 mA ≤ IO ≤ 350 mA) − − 0.5
(IO = 100 mA, f = 120 Hz, 18.5 V ≤ VI ≤ 28.5 V) 54 − −
(IO = 300 mA, f = 120 Hz, 18.5 V ≤ VI ≤ 28.5 V, TJ = 25°C) 54 70 −

Output Voltage (TJ = 25°C) VO 17.3 18 18.7 Vdc
Output Voltage Variation (21 Vdc ≤ VI ≤ 33 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 17.1 − 18.9 Vdc
Line Regulation (TJ = 25°C, 21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) Regline − 10 50 mV
(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 30 360
(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 180
(21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) − − 0.8
(5.0 mA ≤ IO ≤ 350 mA) − − 0.5
(IO = 100 mA, f = 120 Hz, 22 V ≤ VI ≤ 32 V) 53 − −
(IO = 300 mA, f = 120 Hz, 22 V ≤ VI ≤ 32 V, TJ = 25°C) 53 70 −
www.onsemi.com
5

Output Voltage (TJ = 25°C) VO 19.2 20 20.8 Vdc
Output Voltage Variation (23 Vdc ≤ VI ≤ 35 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 19 − 21 Vdc
(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 30 400
(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 200
(23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA) − − 0.8
(5.0 mA ≤ IO ≤ 350 mA) − − 0.5
(IO = 100 mA, f = 120 Hz, 24 V ≤ VI ≤ 34 V) 52 − −
(IO = 300 mA, f = 120 Hz, 24 V ≤ VI ≤ 34 V, TJ = 25°C) 52 70 −

Output Voltage (TJ = 25°C) VO 23 24 25 Vdc
Output Voltage Variation (27 Vdc ≤ VI ≤ 38 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 22.8 − 25.2 Vdc
(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 30 480
(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 240
(27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA) − − 0.8
(5.0 mA ≤ IO ≤ 350 mA) − − 0.5
(IO = 100 mA, f = 120 Hz, 28 V ≤ VI ≤ 38 V) 50 − −
(IO = 300 mA, f = 120 Hz, 28 V ≤ VI ≤ 38 V, TJ = 25°C) 50 70 −
Short Circuit Current Limit (TJ = 25°C) IOS − 350 − mA
= −40°C for MC78MxxAB, B
Thigh = +125°C for MC78MxxAB, AC, B, C
www.onsemi.com
6
DEFINITIONS
Line Regulation − The change in output voltage for a Input Bias Current − That part of the input current that
change in the input voltage. The measurement is made under is not delivered to the load.
conditions of low dissipation or by using pulse techniques
Output Noise Voltage − The rms AC voltage at the
such that the average chip temperature is not significantly
output, with constant load and no input ripple, measured
affected.
over a specified frequency range.
Load Regulation − The change in output voltage for a
Long Term Stability − Output voltage stability under
change in load current at constant chip temperature.
accelerated life test conditions with the maximum rated
Maximum Power Dissipation − The maximum total voltage listed in the devices’ electrical characteristics and
device dissipation for which the regulator will operate maximum power dissipation.
within specifications.
100 2.4
PD, MAXIMUM POWER DISSIPATION (W)

PD(max) for TA = 50°C
Free Air
90 Mounted 2.0
R θ JA, THERMAL RESISTANCE
Vertically
JUNCTION-TO-AIR (° C/W)
2.0 oz. Copper
ÎÎÎÎ
80 L 1.6
ÎÎÎÎ
Minimum
70 Size Pad 1.2
ÎÎÎÎ
L
60 0.8
50 0.4
RqJA
40 0
0 5.0 10 15 20 25 30
L, LENGTH OF COPPER (mm)
Figure 2. DPAK Thermal Resistance and Maximum

Power Dissipation versus P.C.B. Copper Length
10
Infinite Heat
qHS = 10°C/W Sink
PD, POWER DISSIPATION (W)
5.0
3.0 qHS = 20°C/W
2.0
No Heat Sink
1.0
0.5
0.3
0.2 qJC = 5°C/W
PD(max) = 7.52 W
0.1
25 50 75 100 125 150
TA, AMBIENT TEMPERATURE (°C)
Figure 3. Worst Case Power Dissipation

versus Ambient Temperature (TO−220)
www.onsemi.com
7
1.0 2.5
0.9
V I -V O , DROPOUT VOLTAGE (V)

0.8 2.0
I O , OUTPUT CURRENT (A)
TJ = 25°C
0.7 IO = 500 mA
0.6 1.5
0.5 IO = 100 mA
0.4 TJ = 125°C 1.0 IO = 10 mA
0.3
0.2 0.5 DVO = 100 mV
0.1
0 0
0 5.0 10 15 20 25 30 35 40 0 25 50 75 100 125 150
VI - VO, DROPOUT VOLTAGE (V) TJ, JUNCTION TEMPERATURE (°C)
Figure 4. Peak Output Current versus Figure 5. Dropout Voltage versus

Dropout Voltage Junction Temperature
100 100
Iout = 500 mA
RR, RIPPLE REJECTION (dB)
80 RR, RIPPLE REJECTION (dB) 80
60 Iout = 500 mA
Vout = 5.0 V Vout = 5.0 V
60 Vin = 10 V
Vin = 10 V
CO = 0 CO = 0
40 TJ = 25°C f = 120 Hz
TJ = 25°C
40
20 30
1.0 10 100 1.0 k 10 k 100 k 1.0 M 10 M 100 M 0.01 0.1 0.5 1.0 10
f, FREQUENCY (Hz) IO, OUTPUT CURRENT (A)
Figure 6. Ripple Rejection versus Frequency Figure 7. Ripple Rejection versus Output Current
4.0 5.0
TJ = 25°C
4.0 TJ = 25°C
I B , BIAS CURRENT (mA)
I B , BIAS CURRENT (mA)
3.0
3.0
TJ = 125°C
2.0
2.0
TJ = 25°C TJ = 125°C
VO = 5.0 V
1.0 IO = 0.5 A
TJ = 125°C 1.0 VI-VO = 5.0 V
0 0
0 5.0 10 15 20 25 30 35 40 0.01 0.1 0.5 1.0 10
VI, INPUT VOLTAGE (Vdc) IO, OUTPUT CURRENT (A)
Figure 8. Bias Current versus Input Voltage Figure 9. Bias Current versus Output Current
www.onsemi.com
8
APPLICATIONS INFORMATION
Design Considerations regulator is connected to the power supply filter with long
The MC78M00/MC78M00A Series of fixed voltage wire lengths, or if the output load capacitance is large. An
regulators are designed with Thermal Overload Protection input bypass capacitor should be selected to provide good
that shuts down the circuit when subjected to an excessive high frequency characteristics to insure stable operation
power overload condition, Internal Short Circuit Protection under all load conditions. A 0.33 mF or larger tantalum,
that limits the maximum current the circuit will pass, and mylar, or other capacitor having low internal impedance at
Output Transistor Safe−Area Compensation that reduces the high frequencies should be chosen. The bypass capacitor
output short circuit current as the voltage across the pass should be mounted with the shortest possible leads directly
transistor is increased. across the regulator’s input terminals. Normally good
In many low current applications, compensation construction techniques should be used to minimize ground
capacitors are not required. However, it is recommended loops and lead resistance drops since the regulator has no
that the regulator input be bypassed with a capacitor if the external sense lead.
VO, 7.0 V to 20 V
Input MC78M05C Vin-Vout ≥ 2.0 V
0.33 mF R
Constant Output
Current to MC78M05C
Grounded Input
IO Load
7 2
The MC78M00 regulators can also be used as a current source *
0.33 mF 6 0.1 mF
when connected as above. In order to minimize dissipation the
MC78M05C is chosen in this application. Resistor R determines 3
+ 10 k
the current as follows: 1.0 k 4
5.0 V MC1741
IO = + IIB
R
IIB = 1.5 mA over line and load changes.

The addition of an operational amplifier allows adjustment to higher
For example, a 500 mA current source would require R to be a or intermediate values while retaining regulation characteristics.
10W, 10 W resistor and the output voltage compliance would be The minimum voltage obtainable with this arrangement is 2.0 V
the input voltage less 7.0 V. greater than the regulator voltage.
Figure 10. Current Regulator Figure 11. Adjustable Output Regulator
MJ2955
or Equiv.
MJ2955 or Equiv. Input RSC
Input
R
MC78MXXC Output 2N6049
or Equiv.
R
MC78MXXC
1.0 mF 1.0 mF Output
1.0 mF
XX = 2 digits of type number indicating voltage.

XX = 2 digits of type number indicating voltage.
The MC78M00 series can be current boosted with a PNP The circuit of Figure 12 can be modified to provide supply protection
transistor. The MJ2955 provides current to 5.0 A. Resistor R in against short circuits by adding a short circuit sense resistor, Rsc,
conjunction with the VBE of the PNP determines when the pass and an additional PNP transistor. The current sensing PNP must be
transistor begins conducting; this circuit is not short circuit able to handle the short circuit current of the three-terminal
proof. Input-output differential voltage minimum is increased regulator .Therefore, a 4.0 A plastic power transistor is specified.
by VBE of the pass transistor.
Figure 12. Current Boost Regulator Figure 13. Current Boost with
Short Circuit Protection
www.onsemi.com
9
ORDERING INFORMATION
Output
Device Voltage Temperature Range Package Marking Shipping†
MC78M05CDTG 5.0 V TJ = 0° to +125°C DPAK−3 78M05 75 Units / Rail
(Pb−Free)
MC78M05CDTRKG 5.0 V TJ = 0° to +125°C DPAK−3 78M05 2500 / Tape & Reel

(Pb−Free)
MC78M05ACDTRKG 5.0 V TJ = 0° to +125°C DPAK−3 8M05D 2500 / Tape & Reel

(Pb−Free)
MC78M05CTG 5.0 V TJ = 0° to +125°C TO−220 78M05CT 50 Units / Rail

(Pb−Free)
MC78M05ABDTG 5.0 V TJ = −40° to +125°C DPAK−3 8M05A 75 Units / Rail

(Pb−Free)
MC78M05ABDTRKG 5.0 V TJ = −40° to +125°C DPAK−3 8M05A 2500 / Tape & Reel
(Pb−Free)
NCV78M05ABDTRKG* 5.0 V TJ = −40° to +125°C DPAK−3 8M05A 2500 / Tape & Reel
(Pb−Free)
MC78M05BDTG 5.0 V TJ = −40° to +125°C DPAK−3 8M05B 75 Units / Rail

(Pb−Free)
MC78M05BDTRKG 5.0 V TJ = −40° to +125°C DPAK−3 8M05B 2500 / Tape & Reel
(Pb−Free)
NCV78M05BDTRKG* 5.0 V TJ = −40° to +125°C DPAK−3 8M05B 2500 / Tape & Reel
(Pb−Free)
MC78M05BTG 5.0 V TJ = −40° to +125°C TO−220 78M05BT 50 Units / Rail

(Pb−Free)
NCV78M05BTG* 5.0 V TJ = −40° to +125°C TO−220 78M05BT 50 Units / Rail

(Pb−Free)
MC78M06CDTRKG 6.0 V TJ = 0° to +125°C DPAK−3 78M06 2500 / Tape & Reel

(Pb−Free)
MC78M08CDTRKG 8.0 V TJ = 0° to +125°C DPAK−3 78M08 2500 Units / Tape & Reel
(Pb−Free)
MC78M08BDTRKG 8.0 V TJ = −40° to +125°C DPAK−3 8M08B 2500 Units / Tape & Reel
(Pb−Free)
NCV78M08BDTRKG* 8.0 V TJ = −40° to +125°C DPAK−3 8M08B 2500 Units / Tape & Reel
(Pb−Free)
MC78M09CDTRKG 9.0 V TJ = 0° to +125°C DPAK−3 78M09 2500 Units / Tape & Reel
(Pb−Free)
MC78M09BDTRKG 9.0 V TJ = −40° to +125°C DPAK−3 8M09B 2500 Units / Tape & Reel
(Pb−Free)
NCV78M09BDTRKG* 9.0 V TJ = −40° to +125°C DPAK−3 8M09B 2500 Units / Tape & Reel
(Pb−Free)
MC78M12CDTG 12 V TJ = 0° to +125°C DPAK−3 78M12 75 Units / Rail

(Pb−Free)
MC78M12CDTRKG 12 V TJ = 0° to +125°C DPAK−3 78M12 2500 Units / Tape & Reel

(Pb−Free)
MC78M12ACDTRKG 12 V TJ = 0° to +125°C DPAK−3 8M12D 2500 Units / Tape & Reel

(Pb−Free)
MC78M12CTG 12 V TJ = 0° to +125°C TO−220 78M12CT 50 Units / Rail

(Pb−Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable.
www.onsemi.com
10
ORDERING INFORMATION (continued)

Output
Device Voltage Temperature Range Package Marking Shipping†
MC78M12ABDTRKG 12 V TJ = −40° to +125°C DPAK−3 8M12A 2500 Units / Tape & Reel
(Pb−Free)
MC78M12BDTG 12 V TJ = −40° to +125°C DPAK−3 8M12B 75 Units / Rail

(Pb−Free)
MC78M12BDTRKG 12 V TJ = −40° to +125°C DPAK−3 8M12B 2500 Units / Tape & Reel
(Pb−Free)
NCV78M12BDTRKG* 12 V TJ = −40° to +125°C DPAK−3 8M12B 2500 Units / Tape & Reel
(Pb−Free)
MC78M12BTG 12 V TJ = −40° to +125°C TO−220 78M12BT 50 Units / Rail

(Pb−Free)
MC78M15CDTG 15 V TJ = 0° to +125°C DPAK−3 78M15 75 Units / Rail

(Pb−Free)

(Pb−Free)
MC78M15ACDTRKG 15 V TJ = 0° to +125°C DPAK−3 8M15D 2500 Units / Tape & Reel

(Pb−Free)
MC78M15CTG 15 V TJ = 0° to +125°C TO−220 78M15CT 50 Units / Rail

(Pb−Free)
MC78M15ABDTRKG 15 V TJ = −40° to +125°C DPAK−3 8M15A 2500 Units / Tape & Reel
(Pb−Free)
NCV78M15BDTG* 15 V TJ = −40° to +125°C DPAK−3 8M15B 75 Units / Rail

(Pb−Free)
MC78M15BDTRKG 15 V TJ = −40° to +125°C DPAK−3 8M15B 2500 Units / Tape & Reel
(Pb−Free)
NCV78M15BDTRKG* 15 V TJ = −40° to +125°C DPAK−3 8M15B 2500 Units / Tape & Reel
(Pb−Free)

(Pb−Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable.
www.onsemi.com
11
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TO−220, SINGLE GAUGE

CASE 221AB−01
ISSUE A
DATE 16 NOV 2010
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
SEATING
−T− PLANE
2. CONTROLLING DIMENSION: INCHES.
3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND
LEAD IRREGULARITIES ARE ALLOWED.
B F C 4. PRODUCT SHIPPED PRIOR TO 2008 HAD DIMENSIONS
T S S = 0.045 - 0.055 INCHES (1.143 - 1.397 MM)
SCALE 1:1
4 INCHES MILLIMETERS
DIM MIN MAX MIN MAX
A 0.570 0.620 14.48 15.75
Q A B 0.380 0.405 9.66 10.28
C 0.160 0.190 4.07 4.82
1 2 3 U D 0.025 0.035 0.64 0.88
H F 0.142 0.147 3.61 3.73
G 0.095 0.105 2.42 2.66
K H 0.110 0.155 2.80 3.93
Z J 0.018 0.025 0.46 0.64
K 0.500 0.562 12.70 14.27
L 0.045 0.060 1.15 1.52
N 0.190 0.210 4.83 5.33
L R Q 0.100 0.120 2.54 3.04
R 0.080 0.110 2.04 2.79
V J S 0.020 0.024 0.508 0.61
G T 0.235 0.255 5.97 6.47
U 0.000 0.050 0.00 1.27
D V 0.045 --- 1.15 ---
Z --- 0.080 --- 2.04
N
STYLE 1: STYLE 2: STYLE 3: STYLE 4:

PIN 1. BASE PIN 1. BASE PIN 1. CATHODE PIN 1. MAIN TERMINAL 1
2. COLLECTOR 2. EMITTER 2. ANODE 2. MAIN TERMINAL 2
3. EMITTER 3. COLLECTOR 3. GATE 3. GATE
4. COLLECTOR 4. EMITTER 4. ANODE 4. MAIN TERMINAL 2
STYLE 5: STYLE 6: STYLE 7: STYLE 8:

PIN 1. GATE PIN 1. ANODE PIN 1. CATHODE PIN 1. CATHODE
2. DRAIN 2. CATHODE 2. ANODE 2. ANODE
3. SOURCE 3. ANODE 3. CATHODE 3. EXTERNAL TRIP/DELAY
4. DRAIN 4. CATHODE 4. ANODE 4. ANODE
STYLE 9: STYLE 10: STYLE 11:

PIN 1. GATE PIN 1. GATE PIN 1. DRAIN
2. COLLECTOR 2. SOURCE 2. SOURCE
3. EMITTER 3. DRAIN 3. GATE
4. COLLECTOR 4. SOURCE 4. SOURCE
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
DOCUMENT NUMBER: 98AON23085D Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DESCRIPTION: TO−220, SINGLE GAUGE PAGE 1 OF 1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019 www.onsemi.com

MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
4 DPAK (SINGLE GAUGE)

CASE 369C
ISSUE F
1 2 DATE 21 JUL 2015
3
SCALE 1:1
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
A Y14.5M, 1994.
E C 2. CONTROLLING DIMENSION: INCHES.
A 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DI-
b3 MENSIONS b3, L3 and Z.
B c2 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL
4 NOT EXCEED 0.006 INCHES PER SIDE.
L3 Z 5. DIMENSIONS D AND E ARE DETERMINED AT THE
D OUTERMOST EXTREMES OF THE PLASTIC BODY.
DETAIL A H 6. DATUMS A AND B ARE DETERMINED AT DATUM
1 2 3 PLANE H.
7. OPTIONAL MOLD FEATURE.
L4 INCHES MILLIMETERS
NOTE 7
DIM MIN MAX MIN MAX
b2 c BOTTOM VIEW A 0.086 0.094 2.18 2.38
e SIDE VIEW A1 0.000 0.005 0.00 0.13
b b 0.025 0.035 0.63 0.89
0.005 (0.13) M C b2 0.028 0.045 0.72 1.14
TOP VIEW b3 0.180 0.215 4.57 5.46
c 0.018 0.024 0.46 0.61
c2 0.018 0.024 0.46 0.61
H Z Z D 0.235 0.245 5.97 6.22
E 0.250 0.265 6.35 6.73
e 0.090 BSC 2.29 BSC
GAUGE SEATING
L2 PLANE C PLANE
H 0.370 0.410 9.40 10.41
L 0.055 0.070 1.40 1.78
L1 0.114 REF 2.90 REF
L2 0.020 BSC 0.51 BSC
L BOTTOM VIEW L3 0.035 0.050 0.89 1.27
A1 L4 −−− 0.040 −−− 1.01
L1 ALTERNATE
Z 0.155 −−− 3.93 −−−
CONSTRUCTIONS
DETAIL A
ROTATED 905 CW GENERIC
MARKING DIAGRAM*
STYLE 1: STYLE 2: STYLE 3: STYLE 4: STYLE 5:
PIN 1. BASE PIN 1. GATE PIN 1. ANODE PIN 1. CATHODE PIN 1. GATE
2. COLLECTOR 2. DRAIN 2. CATHODE 2. ANODE 2. ANODE
3. EMITTER 3. SOURCE 3. ANODE 3. GATE 3. CATHODE
4. COLLECTOR 4. DRAIN 4. CATHODE 4. ANODE 4. ANODE XXXXXXG AYWW
ALYWW XXX
STYLE 6: STYLE 7: STYLE 8: STYLE 9: STYLE 10: XXXXXG
PIN 1. MT1 PIN 1. GATE PIN 1. N/C PIN 1. ANODE PIN 1. CATHODE
2. MT2 2. COLLECTOR 2. CATHODE 2. CATHODE 2. ANODE
3. GATE 3. EMITTER 3. ANODE 3. RESISTOR ADJUST 3. CATHODE
4. MT2 4. COLLECTOR 4. CATHODE 4. CATHODE 4. ANODE
IC Discrete
SOLDERING FOOTPRINT* XXXXXX = Device Code

A = Assembly Location
6.20 3.00 L = Wafer Lot
0.244 0.118 Y = Year
2.58
0.102 WW = Work Week
G = Pb−Free Package
5.80 *This information is generic. Please refer

1.60 6.17 to device data sheet for actual part
0.228 0.063 0.243 marking.
SCALE 3:1 ǒinches

mm Ǔ
*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
DOCUMENT NUMBER: 98AON10527D Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DESCRIPTION: DPAK (SINGLE GAUGE) PAGE 1 OF 1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2018 www.onsemi.com

onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT: TECHNICAL SUPPORT
Email Requests to: orderlit@onsemi.com North American Technical Support: Europe, Middle East and Africa Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 00421 33 790 2910
onsemi Website: www.onsemi.com Phone: 011 421 33 790 2910 For additional information, please contact your local Sales Representative

8M15B

Uploaded by

Document Informationclick to expand document information8M15B

Document Informationclick to expand document information

Copyright:

Available Formats

8M15B

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

8M15B

Uploaded by

Copyright:

Available Formats

DATA SHEET

500 mA Positive Voltage

• Internal Thermal Overload Protection

See detailed ordering and shipping information in the package

DEVICE MARKING INFORMATION

This device contains 28 active transistors.

Figure 1. Representative Schematic Diagram

© Semiconductor Components Industries, LLC, 2016 1 Publication Order Number:

MAXIMUM RATINGS (TA = 25°C, unless otherwise noted) (Note 1)

MC78M05C/AC/B/AB, NCV78M05AB/B ELECTRICAL CHARACTERISTICS

Characteristics Symbol Min Typ Max Unit

MC78M06C/B ELECTRICAL CHARACTERISTICS

Characteristics Symbol Min Typ Max Unit

MC78M08C/AC/B/AB, NCV78M08B ELECTRICAL CHARACTERISTICS

Characteristics Symbol Min Typ Max Unit

MC78M09C/B, NCV78M09B ELECTRICAL CHARACTERISTICS

MC78M12C/AC/B/AB, NCV78M12B ELECTRICAL CHARACTERISTICS

MC78M15C/AC/B/AB, NCV78M15B ELECTRICAL CHARACTERISTICS

MC78M18C/B ELECTRICAL CHARACTERISTICS

MC78M20C/B ELECTRICAL CHARACTERISTICS

MC78M24C/B ELECTRICAL CHARACTERISTICS

PD, MAXIMUM POWER DISSIPATION (W)

2.0 oz. Copper

Figure 2. DPAK Thermal Resistance and Maximum

Figure 3. Worst Case Power Dissipation

V I -V O , DROPOUT VOLTAGE (V)

Figure 4. Peak Output Current versus Figure 5. Dropout Voltage versus

80 RR, RIPPLE REJECTION (dB) 80

I B , BIAS CURRENT (mA)

IIB = 1.5 mA over line and load changes.

Figure 10. Current Regulator Figure 11. Adjustable Output Regulator

XX = 2 digits of type number indicating voltage.

MC78M05CDTRKG 5.0 V TJ = 0° to +125°C DPAK−3 78M05 2500 / Tape & Reel

MC78M05ACDTRKG 5.0 V TJ = 0° to +125°C DPAK−3 8M05D 2500 / Tape & Reel

MC78M05CTG 5.0 V TJ = 0° to +125°C TO−220 78M05CT 50 Units / Rail

MC78M05ABDTG 5.0 V TJ = −40° to +125°C DPAK−3 8M05A 75 Units / Rail

MC78M05BDTG 5.0 V TJ = −40° to +125°C DPAK−3 8M05B 75 Units / Rail

MC78M05BTG 5.0 V TJ = −40° to +125°C TO−220 78M05BT 50 Units / Rail

NCV78M05BTG* 5.0 V TJ = −40° to +125°C TO−220 78M05BT 50 Units / Rail

MC78M06CDTRKG 6.0 V TJ = 0° to +125°C DPAK−3 78M06 2500 / Tape & Reel

MC78M12CDTG 12 V TJ = 0° to +125°C DPAK−3 78M12 75 Units / Rail

MC78M12CDTRKG 12 V TJ = 0° to +125°C DPAK−3 78M12 2500 Units / Tape & Reel

MC78M12ACDTRKG 12 V TJ = 0° to +125°C DPAK−3 8M12D 2500 Units / Tape & Reel

MC78M12CTG 12 V TJ = 0° to +125°C TO−220 78M12CT 50 Units / Rail

ORDERING INFORMATION (continued)

MC78M12BDTG 12 V TJ = −40° to +125°C DPAK−3 8M12B 75 Units / Rail

MC78M12BTG 12 V TJ = −40° to +125°C TO−220 78M12BT 50 Units / Rail

MC78M15CDTG 15 V TJ = 0° to +125°C DPAK−3 78M15 75 Units / Rail

MC78M15CDTRKG 15 V TJ = 0° to +125°C DPAK−3 78M15 2500 Units / Tape & Reel

MC78M15ACDTRKG 15 V TJ = 0° to +125°C DPAK−3 8M15D 2500 Units / Tape & Reel

MC78M15CTG 15 V TJ = 0° to +125°C TO−220 78M15CT 50 Units / Rail

NCV78M15BDTG* 15 V TJ = −40° to +125°C DPAK−3 8M15B 75 Units / Rail

MC78M18CDTRKG 18 V TJ = 0° to +125°C DPAK−3 78M18 2500 Units / Tape & Reel

TO−220, SINGLE GAUGE

STYLE 1: STYLE 2: STYLE 3: STYLE 4:

STYLE 5: STYLE 6: STYLE 7: STYLE 8:

STYLE 9: STYLE 10: STYLE 11:

DESCRIPTION: TO−220, SINGLE GAUGE PAGE 1 OF 1