GeM Bidding 5335840
GeM Bidding 5335840
GeM Bidding 5335840
GEM/2023/B/3971191
Dated/ दनांक : 06-10-2023
1/9
Bid Details/ बड ववरण
(a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the
relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service
Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this
Policy./जेम क शत के अनुसार ईएमड छूट के इ छुक बडर को संबंिधत केटे गर के िलए बड के साथ वैध समिथत द तावेज़ तुत करने है ।
एमएसई केटे गर के अंतगत केवल व तुओं के िलए विनमाता तथा सेवाओं के िलए सेवा दाता ईएमड से छूट के पा ह। यापा रय को इस नीित के
दायरे से बाहर रखा गया है ।
(b). The EMD Amount will be applicable for each schedule/group selected during Bid creation.
(c). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable./ईएमड और संपादन
जमानत रािश, जहां यह लागू होती है , लाभाथ के प म होनी चा हए।
Beneficiary/लाभाथ :
Director AIIMS Raipur
All India Institute of Medical Sciences (AIIMS), Raipur.
(Director)
2/9
Splitting/ वभाजन
1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be
exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of
quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the
"OEM Average Turnover" criteria also subject to meeting of quality and technical specifications. In case any
bidder is seeking exemption from Turnover / Experience Criteria, the supporting documents to prove his eligibility
for exemption must be uploaded for evaluation by the buyer.
2. The minimum average annual financial turnover of the bidder during the last three years, ending on 31st
March of the previous financial year, should be as indicated above in the bid document. Documentary evidence in
the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant /
Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the
date of constitution / incorporation of the bidder is less than 3-year-old, the average turnover in respect of the
completed financial years after the date of constitution shall be taken into account for this criteria.
3. Experience Criteria: In respect of the filter applied for experience criteria, the Bidder or its OEM {themselves or
through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any
Central / State Govt Organization / PSU / Public Listed Company for number of Financial years as indicated above
in the bid document before the bid opening date. Copies of relevant contracts to be submitted along with bid in
support of having supplied some quantity during each of the Financial year. In case of bunch bids, the category of
primary product having highest value should meet this criterion.
4. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period
shall be uploaded with the bid. In case the date of constitution / incorporation of the OEM is less than 3 year old,
the average turnover in respect of the completed financial years after the date of constitution shall be taken into
account for this criteria.
5. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier
as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its
subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum
local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the
Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local
content and the details of locations at which the local value addition is made along with their bid, failing which
no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating
to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company
and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public
Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers
as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are
not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .The
buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023.
OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy
for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017.
6. Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
3/9
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued
by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned
Ministry. If the bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offered
product in case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy for
Micro and Small Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered
Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the
offered product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15%
(Selected by Buyer)of margin of purchase preference /price band defined in relevant policy, such Seller shall be
given opportunity to match L-1 price and contract will be awarded for 25%(selected by Buyer) percentage of
total QUANTITY.The buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023
OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy
for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017.
7. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and
for determining the Eligibility Criteria related to Turn Over, Past Performance and Project / Past Experience etc.
This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any
impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of
quoted prices which would be determined by the buyer based on its own assessment of reasonableness and
based on competitive prices received in Bid / RA process.
8. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 50% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU / Public Listed Company. Copies of relevant
contracts (proving supply of cumulative order quantity in any one financial year) to be submitted along with bid
in support of quantity supplied in the relevant Financial year. In case of bunch bids, the category related to
primary product having highest bid value should meet this criterion.
9. Reverse Auction would be conducted amongst all the technically qualified bidders except the Highest quoting
bidder. The technically qualified Highest Quoting bidder will not be allowed to participate in RA. However, H-1
will also be allowed to participate in RA in following cases:
Contract will be awarded schedulewise and the determination of L1 will be done separately for each schedule.
The details of item-consignee combination covered under each schedule are as under:
Buyer Specification
Download
Document/ े ता विश द तावेज़
4/9
Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा
Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार
Buyer Specification
Download
Document/ े ता विश द तावेज़
Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार
Buyer Added Bid Specific Terms and Conditions/ े ता ारा जोड़ गई बड क वशेष शत
(i) Bid specific OEM Authorization certificate must be uploaded i.e. BID No. mentioned in OEM authorization
certificate.
(ii) Legal Jurisdiction: Raipur Chhattisgarh and court within Raipur, Chhattisgarh
2. Experience Certificate for the supply of the same to any Govt/ PSU/ any renowned private organisation
along with Supply/ Purchase Order.
3. Make in india specific authorisation certificate needs to be enclosed.
4. Generic
5/9
Experience Criteria: The Bidder or its OEM {themselves or through reseller(s)} should have regularly,
manufactured and supplied same or similar Category Products to any Central / State Govt Organization /
PSU / Public Listed Company for 3 years before the bid opening date. Copies of relevant contracts to be
submitted along with bid in support of having supplied some quantity during each of the year. In case of
bunch bids, the primary product having highest value should meet this criterion.
5. Generic
6. Generic
OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up
to 50 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to
increase the ordered quantity by up to 50% of the contracted  quantity during the currency of the
contract at the contracted rates. Bidders are bound to accept the orders accordingly.
7. Generic
Actual delivery (and Installation & Commissioning (if covered in scope of supply)) is to be done at
following address
MGPS Department
Near Amrit Pharmacy
Gate No. 01
AIIMS Raipur
Tatibandh GE Road (CG)
.
8. Generic
Data Sheet of the product(s) offered in the bid, are to be uploaded along with the bid documents. Buyers
can match and verify the Data Sheet with the product specifications offered. In case of any unexplained
mismatch of technical parameters, the bid is liable for rejection.
9. Scope of Supply
Scope of supply (Bid price to include all cost components) : Supply Installation Testing and
Commissioning of Goods
10. Turnover
Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last
three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the
relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
bidder is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria.
11. Turnover
OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in
the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant
periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for
the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
OEM is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria. In case of bunch bids, the OEM of
CATEGORY RELATED TO primary product having highest bid value should meet this criterion.
6/9
12. Certificates
Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the
Bid document, ATC and Corrigendum if any.
13. Certificates
The bidder is required to upload, along with the bid, all relevant certificates such as BIS licence, type test
certificate, approval certificates and other certificates as prescribed in the Product Specification given in
the bid document.
After award of contract – Successful Bidder shall have to get advance sample approved from buyer before
bulk manufacturing / starting bulk supplies. Successful Bidder shall submit
1
samples for Buyer's approval, within 7 days of award of contract. Buyer shall, as per contract specifications
framework, either approve the advance sample or will provide complete list of modification required in the
sample within 7 days of receipt of advance sample. Seller shall be required to ensure supply as per
approved sample with modifications as communicated by Buyer. If there is delay from buyer side in
approval of advance sample – the delivery period shall be refixed without LD for the period of delay in
sample approval. In case, the sample is found to have major deviations / not conforming to the Contract
specifications, the buyer at its discretion may call for fresh samples for approval before allowing bulk
supplies or may terminate the contract after notifying the deviations to the seller.
Unless otherwise provided in the contract, all samples required for test shall be supplied by the contractor
free of cost. Where under the contract, the contractor is required to submit an advance sample, any
expenses incurred by the contractor on or in connection with the production of stores in bulk, before the
sample has been approved unconditionally shall be borne by the Seller and he shall not claim any
compensation in the event of such sample being found unacceptable by the Buyer / Consignee.
Bidders can also submit the EMD with Account Payee Demand Draft in favour of
Bidders can also submit the EMD with Fixed Deposit Receipt made out or pledged in the name of A/C
(Name of the Buyer). The bank should certify on it that the deposit can be withdrawn only on the demand
or with the sanction of the pledgee. For release of EMD, the FDR will be released in the favour of the
bidder by the Buyer after making endorsement on the back of the FDR duly signed and stamped along
with covering letter. Bidder has to upload scanned copy/ proof of the FDR along with bid and has to ensure
delivery of hardcopy to the Buyer within 5 days of Bid End date/ Bid Opening date
Successful Bidder can submit the Performance Security in the form of Account Payee Demand Draft also
(besides PBG which is allowed as per GeM GTC). DD should be made in favour of
7/9
Successful Bidder can submit the Performance Security in the form of Fixed Deposit Receipt also (besides
PBG which is allowed as per GeM GTC). FDR should be made out or pledged in the name of
Disclaimer/अ वीकरण
The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization, whereby Buyer organization is solely responsible for the impact of these clauses
on the bidding process, its outcome, and consequences thereof including any eccentricity / restriction arising in
the bidding process due to these ATCs and due to modification of technical specifications and / or terms and
conditions governing the bid. Any clause(s) incorporated by the Buyer regarding following shall be treated as
null and void and would not be considered as part of bid:-
1. Definition of Class I and Class II suppliers in the bid not in line with the extant Order / Office Memorandum
issued by DPIIT in this regard.
2. Seeking EMD submission from bidder(s), including via Additional Terms & Conditions, in contravention to
exemption provided to such sellers under GeM GTC.
3. Publishing Custom / BOQ bids for items for which regular GeM categories are available without any
Category item bunched with it.
4. Creating BoQ bid for single item.
5. Mentioning specific Brand or Make or Model or Manufacturer or Dealer name.
6. Mandating submission of documents in physical form as a pre-requisite to qualify bidders.
7. Floating / creation of work contracts as Custom Bids in Services.
8. Seeking sample with bid or approval of samples during bid evaluation process.
9. Mandating foreign / international certifications even in case of existence of Indian Standards without
specifying equivalent Indian Certification / standards.
10. Seeking experience from specific organization / department / institute only or from foreign / export
experience.
11. Creating bid for items from irrelevant categories.
12. Incorporating any clause against the MSME policy and Preference to Make in India Policy.
13. Reference of conditions published on any external site or reference to external documents/clauses.
14. Asking for any Tender fee / Bid Participation fee / Auction fee in case of Bids / Forward Auction, as the
case may be.
Further, if any seller has any objection/grievance against these additional clauses or otherwise on any aspect of
this bid, they can raise their representation against the same by using the Representation window provided in
the bid details field in Seller dashboard after logging in as a seller within 4 days of bid publication on GeM. Buyer
is duty bound to reply to all such representations and would not be allowed to open bids if he fails to reply to
such representations.
This Bid is also governed by the General Terms and Conditions/ यह बड सामा य शत के अंतगत भी शािसत है
In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action
in accordance with the laws./ जेम क सामा य शत के खंड 26 के संदभ म भारत के साथ भूिम सीमा साझा करने वाले दे श के बडर से खर द
पर ितबंध के संबंध म भारत के साथ भूिम सीमा साझा करने वाले दे श का कोई भी बडर इस िन वदा म बड दे ने के िलए तभी पा होगा
जब वह बड दे ने वाला स म ािधकार के पास पंजीकृ त हो। बड म भाग लेते समय बडर को इसका अनुपालन करना होगा और कोई भी
गलत घोषणा कए जाने व इसका अनुपालन न करने पर अनुबंध को त काल समा करने और कानून के अनुसार आगे क कानूनी कारवाई
8/9
का आधार होगा।
9/9