6 5 4 3 2 1

REVISION HISTORY
55
REV DATE DESCRIPTION BY APP'D
14,2 44 20 DRILL Ø12 THRU - - - - -
THEN THREAD 1/2" BSPP 31
N 18
4 PLACES BOTH SIDE DETAIL C
D D
AS DRAWN 15,5 15,5
M DRILL Ø6 TO B
DRILL Ø6 TO P
C
B T DRILL Ø6 TO A
DRILL Ø6 TO T
B
SECTION N-N

40,5
27,8
P T
A P DRILL Ø6x35MM DEEP TO P

19
AS DRAWN A
17

80°
8

17
M

10,3
3xn7 9
C TYP 20
N P 5,9 C
DRILL & TAP 4 M5x0.8 26,5
P x15mm DEEP
GMVN APPROVAL AS DRAWN
2018.03.0
16,3 16,3
Date: 8 11:58:37
Sign: +07'00' 32,5
20

SECTION D-D SECTION M-M

128
DRILL Ø10x25mm DEEP
DRILL Ø6x14mm DEEP
THEN THREAD PORT 3/8" BSPP
36,2 55 16 TO A
DRILL Ø6x50mm DEEP
D 15 TO B
B
T B
A

31
P T
48,5
13,5

A P T
62

T
B B
24,5 35 63°
D DRILL Ø6x43MM DEEP TO T
75 DRILL Ø10x45mm DEEP
THEN THREAD PORT 3/8" BSPP AS DRAWN
1
NOTE:
GAL AFTER COMPLETE.
ITEM 001-2
1 REQ'D 1 VPL065M01 MS.65 MM ( PLATE ) 1
A ITEM PART NUMBER DESCRIPTION QTY A
THIS DRAWING AND THE INFORMATION ALL SHARP EDGES TO BE REMOVED NOMINAL OVER 0 6 30 120 400 1000 TITLE: WEIGHT (Kgs):
CONTAINED HERE IN IS THE PROPERTY /DEBURRED. ALL WELD SPATTER TO BE JSA-2HSR
OF JACON INTERNATIONAL PTE. LTD. REMOVED. SIZE TO 6 30 120 400 1000 DRAWN HH 09/03/2017
PROJECT:
AND MUST NOT BE COPIED,
REPRODUCED OR USED WITHOUT THE UNLESS OTHERWISE SPECIFIED DIMENSIONS
WRITTEN PERMISSION OF JACON ARE IN MILIMETERS. THE TOLERANCES ON
MACHINED +/- 0.1 0.1 0.2 0.2 0.5 1
JACON
INTERNATIONAL
JSA-HSR CHK'D NT 09/03/2017 SCALE: nts.
DIMENSIONS FOR WHICH NO LIMITS ARE GIVE
INTERNATIONAL PTE. LTD.
SHALL BE SHOWN AS BELOW: FABRICATED +/- 0.2 0.2 0.5 0.5 1 1 PTE. LTD. DRAWING No.: JSA-2HSR-001 REV: A APP' D ER 09/03/2017 SHEET: A4
6 5
\\Engineer-002\d\VPS DATA-E002\MANIFOLD\MA1026SAS\JSA-2HSR-001.idw
4 3 2 1