Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 2 views

    25 June 24

    Uploaded by

    Sidik Nopiansyah

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    25 June 24

    Uploaded by

    Sidik Nopiansyah
    2 views3 pages

    Original Title

    25 JUNE 24

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2 views3 pages

    25 June 24

    Uploaded by

    Sidik Nopiansyah

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    PT Trakindo Utama COMPONENT CONDITION REPORT

    Reported By : Sidik N Reported Date : 25 June 2024


    Equipment No : Engine 3 Cust WO No :

    SIMS Information
    DEALER STORENO EQUIPMENT CUSTOMER
    CODE J211 31 NUMBER ENGINE 3 NAME PT APEXINDO
    TECHNICIAN EQUIPMENT
    DATE 25 June IDENTIFICATION 22536 LOCATION Maera
    CATERPILLAR CATERPILLAR INSTRUCTION
    MODEL 3516 SERIAL No 73Z00535
    ALIGNMENT GENERATOR
    HOURS 42461 KILOMETERS ENGINE #3
    PART  IF PART NAME QTY DESC,* GROUPNO  IF GROUP NAME IF MADE  IF DESCRIPTIVE COMMENTS
    NUMBER NON CODE CONTAINING NON PRODUCT DURABILITY
    RESPONSIBLE CAT PART CAT INOPERABLE ISSUE
     49 4450  EPG  GENERATOR
    DESCRIPTION CODES * A – Structural C – Leaks E – System Malfunction G – General Repair K - Serviceability X – Operator
    (Refer SIMS Guidelines : B – Surface D – Factory Assembly F – Factory Shipping H – Adjustment N - Abuse Complaint
    SEBD0850)

    Component Information
    Component Description : PCR Schedule Hrs : CompTargethrs
    Comp Serial No / ID : Comp Hours : Current hrs failed
    Comp Arr / Gp No : Life Remaining : Remain of target life
    MachineHrs Install : Comp New Price :
    MachineHrs Removed : Cost To Repair :
    Date Comp Installed : Cost/Hr Remaining :
    Date Comp Failed :

    Failure Outline :

    Part Name: Alignment


    Photo / Drawing
    Part No.:
    Failure Mode:
    Comments :
    Perform generator alignment with cold alignment method and find parallel or bore alignment results and angular or face
    alignment results. Tool was installed with following procedure below.

    1 of 3 Form No :PSDV.SVOP.FRM.032.R01
    PT Trakindo Utama COMPONENT CONDITION REPORT

    Part Name: Alignment Specification Photo / Drawing


    Part No.:
    Failure Mode:
    Comments :
    Listed below the specification generator alignment for double bearing. Specification that applies to actual engine is rear
    driven generator spec sheet. New or realigned unit specification applies when generator is being installed. Used unit
    specification applies when generator set has operated within the operating temperature and generator alignment is checked
    once engine stops and cools down below the operating temperature. Bore specification “A to C TIR” must be within range
    (0.015±0.002” for new or realigned unit and 0.015”±0.010” for used unit).

    2 of 3 Form No :PSDV.SVOP.FRM.032.R01
    PT Trakindo Utama COMPONENT CONDITION REPORT

    Part Name: Alignment GEN#3 Photo / Drawing


    Part No.:
    Failure Mode:
    Comments :
    Alignment results for GENSET#3
    Model 3516 Serial number 73Z00535

    Figure. Overall Engine Condition

    Alignment results
    Actual Ind A B C D TIR A to C TIR B to D
    Realign face 0 + 0.006” + 0.008” + 0.003” + 0.008” + 0.003”

    Realign bore 0 + 0.011” + 0.015” + 0.008” + 0.015” + 0.003”

    Position A Position B Position C Position D

    3 of 3 Form No :PSDV.SVOP.FRM.032.R01

    You might also like