Product Catalog

A LEADING MANUFACTURER
OF ABSOLUTE RATED FILTERS

Custom Engineered Solutions!

Oil & Gas, Petrochemical & Industrial Applications

Filtration Technology Corporation (FTC)

is a leading technology liquid cartridge filter
manufacturer founded in 1987. FTC is
dedicated to providing custom engineered
solutions for the Oil & Gas, Petrochemical
and Industrial Industries.

FTC’s 60,000 square foot facility located in

Houston, Texas provides an integrated home
for our manufacturing , marketing, research
and development personnel.

FTC’s manufacturing operation utilizes the FTC’s product line includes pleated cartridge
latest technology equipment to produce a wide filters, pleated bag filters, oil removal filters,
variety of specialized filtration products that high capacity filters, coalescing filters, and a
are sold around the world. wide variety of specialty filters.
 TABLE OF CONTENTS
Pages
I. INTRODUCTION
2-3
II. TABLE OF CONTENTS 4

PRODUCT MODEL SERIES DESCRIPTION

III. STANDARD CARTRIDGES

x Conventional Series AB Standard 2.5” OD 5-6
x ABP Series ABP PECO 336 Style 7-8
x ABY Series ABY Pall™ MCC1401 Style 9-10
x AB 430 Series AB-430 PM Series 42 Style 11-12
x AB 500 Series AB-500 PM Series 51 Style 13-14
x Premium Deep Pleat 740 Series PDP-740 FTC Economy 740 Style 15-16
IV. HIGH CAPACITY FILTERS
x Platinum Select 740 Series PSS-740 FTC Premium 740 Style 17-18
x Platinum 940 Series PS-940 FTC 940 Style 19-20
x Platinum 2040 Series PS-2040 FTC 2040 Style 21-22
V. HIGH FLOW FILTERS
x DPU High Flow 600 Series DPU-600 High Flow Style 23-24
VI. BAG FILTRATION FILTERS
x Maximum Capacity Bag 650 Series MC-650 Premium Pleated Bag 25-26
x High Capacity Bag 550 Series HC-550 Economy Pleated Bag 27-28
x Nominal Bag 100 Series NB-100 Nominal Pleated Bag 29-30
x DPW Bag 600 Series DPW-600 High Temp Pleated Bag 31-32
VII. OIL REMOVAL FILTERS
x 240 Emerald Series ES-249 Standard 2.5” Oil Removal 33
x 740 Emerald Series ES-749 740 Style Oil Removal 34
VIII. COALESCER FILTERS
x Liquid-Gas Coalescer Series 35
x CG28 Liquid-Gas Coalescer Series CG28 Pall Style 36
x CG40 Liquid-Gas Coalescer Series CG40 PECO Style 37
x CG60 Liquid-Gas Coalescer Series CG60 Pall Style 38
 FTC’S STATE OF THE ART TEST LABORATORY
FTC’s Research and Development
Department is a prime example of the
company’s dedication to improving its existing
products while developing new ones.

The FTC Full Scale Test Lab, with flow rate

capability of up to 800 GPM is used to test the
comparative performance of different filters.

Particle Analysis is performed at the

submicron level with a computerized
microscope.

The FTC Bench Lab is used to perform The FTC Test Loop utilizes a 1100 gallon
gravimetric analysis, filterability testing, and clean water tank, twin 450 GPM centrifugal
oil-water analysis. pumps, dual 90 gallon particle injection tanks,
flow meters, and a half micron cleanup filter.

Filtration Technology Corporation

5175 Ashley Court
Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com
 CONVENTIONAL
SERIES FILTERS
Brochure Code CS-001-09-12

COST EFFECTIVE FILTRATION

FTC’s pleated cartridges are designed to
efficiently remove a large range of solids from
process streams. Each cartridge has a pleated,
fixed pore media which maximizes effective
surface area while preventing particle
unloading and fiber migration. Absolute media
micron ratings between 0.5 to 100 micron.
Based on similar flow rates, FTC Conventional
Series filters have up to 4 times the dirt holding
capacity of typical string wound cartridges and
up to twice the dirt holding capacity of typical
spun bonded filters.

BENEFITS
• Provides significantly greater dirt holding
than string wound and spun bonded elements.
• Simple installation with various end cap and
seal material options to ensure positive capture
of contaminants.
• Absolute Rated media for reliable results in
any critical application. DIMENSIONS
• Fixed pore media prevents particle unloading
and allows for absolute rating. Outside Diameter: 2.50”
• Superior methods of construction combined Inside Diameter: 1.1”
with excellent quality control techniques, Length: 20”, 29.25”, 29.5”, 29.75”, 30”,
ensure that FTC filter cartridges will provide 36”, 40”
quality filtration in difficult operating
conditions. MATERIALS OF CONSTRUCTION

COMMON APPLICATIONS Filter Media: Cellulose, Polypropylene, Micro-Fiberglass,

Polyester, and Nylon
Center Core: Polypropylene, Tinned Steel, Stainless Steel
• Amines, Glycols, Acids, Bases, Pre-RO,
Netting: Polypropylene, Polyester
Completion Fluids, Brines, Waterflood, Produced
End Caps: Polypropylene, Tinned Steel, Stainless Steel
Water, Disposal Water

FILTRATION TECHNOLOGY CORPORATION

5
 PRODUCT MEDIA MICRON RATING AT EFFICIENCY
SPECIFICATIONS
FILTER MODEL 0.5 2 5 10 20 40 70 100
Micron Ratings @ 99.98% (beta 5000):
99.00% (beta 100) 0.3 1 2 5 10 25 40 70
0.5, 2, 5, 10, 20, 40, 70 and 100 Micron
99.98% (beta 5000) 0.5 2 5 10 20 40 70 100
Surface Area:
Up to 5.1 ft² Per 10” of filter length
DIRT HOLDING CAPACITY (LBS)*
Maximum Operating Conditions: Per 10” length
185°F (85°C) Continuous Operating Temp
FILTER MODEL 0.5 2 5 10 20 40 70 100

Recommended Flow Rate for Pounds of Solids 0.50 0.61 0.65 0.65 0.65 0.67 0.70 0.74
Optimal Dirt Loading:
2.0 GPM Per 10” of filter length
CLEAN PRESSURE DROP (PSID)*
Maximum Recommended Per 10” length
Differential Pressure:
FILTER MODEL 0.5 2 5 10 20 40 70 100
35 PSID
PSID @ 2 GPM 1.30 0.42 0.24 0.23 0.21 0.19 0.19 0.14
Data based on Filtration Technology Corporation PSID @ 4 GPM 4.57 0.52 0.49 0.47 0.46 0.46 0.41 0.35
Research and Development Center’s standard test
procedure, a modified version of ISO 19438. PSID @ 6 GPM 7.64 1.79 1.07 1.04 1.01 0.77 0.60 0.52
The procedure uses ISO Standard test dust and
deionized water as the challenge slurry. The PSID @ 8 GPM 10.4 2.80 1.69 1.67 1.65 1.40 1.29 1.15
reported data is on the polypropylene elements.

CARTRIDGE CODING

AB 0.5 P 4 2
ABSOLUTE SERIES MICRON RATING MEDIA LENGTH END CAP
99.98%

0.5 - 0.5 Micron P - Polypropylene 2 - 29.75" 1 - DOE

02 - 2 Micron C - Cellulose 3 - 36" 2 - 222 O-Ring

05 - 5 Micron G - Glass 4 - 40" 3 - SOE w/ Spring
10 - 10 Micron R - Polyester 5 - 30" 7 - 222 w/ Fin

20 - 20 Micron N - Nylon 6 - 29.25"

40 - 40 Micron 7 - 29.50

70 - 70 Micron 9 - 20"

100 - 100 Micron

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court

Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com
6
 ABP SERIES
FILTERS
Brochure Code ABP-001-09-12

COST EFFECTIVE FILTRATION

FTC’s ABP Series pleated cartridges are
designed to efficiently remove a large range of
solids from process streams. Each cartridge
has a pleated, fixed pore media which
maximizes effective surface area while
preventing particle unloading and fiber
migration.
The ABP Series will fit all 336 style filter
vessels in the market and provide absolute
micron ratings between 0.5 to 100 micron.
FTC’s superior methods of construction
combined with excellent quality control, ensure
ABP cartridges will provide quality filtration in
difficult operating conditions.
BENEFITS
• Due to the surface area and dirt holding
capacity of the ABP Series filters, they provide
a significant cost savings compared to the
conventional non-pleated string wound, depth
and spun bonded 336 filters.
• Having the cap and spring as part of the DIMENSIONS
element provides easy installation and
extraction resulting in a more operator friendly Outside Diameter: 3.00”
element than standard double open ended Inside Diameter: 1.5”
cartridges. Length: 36”
• Gasket seal to ensure positive capture of
contaminants.
• Absolute rated media with fixed pore structure MATERIALS OF CONSTRUCTION
prevents particle unloading and provides
reliable results in critical applications. Filter Media: Cellulose, Polypropylene, Micro-Fiberglass,
Polyester or Nylon
COMMON APPLICATIONS Center Core: Tinned Steel
Netting: Polypropylene or Polyester
• Amines, Glycols, Completion Fluids, Brines, End Caps: Tinned Steel
Fuels, Waterflood, Produced Water, Disposal Water

FILTRATION TECHNOLOGY CORPORATION

7
 PRODUCT MEDIA MICRON RATING AT EFFICIENCY
SPECIFICATIONS
FILTER MODEL 0.5 2 5 10 20 40 70 100
Micron Ratings @ 99.98% (beta 5000):
0.5, 2, 5, 10, 20, 40, 70 and 100 Micron 99.00% (beta 100) 0.3 1 2 5 10 25 40 70

Surface Area: 99.98% (beta 5000) 0.5 2 5 10 20 40 70 100

Up to 18 ft² Per Filter

Maximum Operating Conditions: DIRT HOLDING CAPACITY (LBS)*

Per 36” Filter
185°F (85°C) Continuous Operating Temp
FILTER MODEL 0.5 2 5 10 20 40 70 100
Recommended Flow Rate for
Pounds of Solids 1.65 2.01 2.15 2.15 2.15 2.21 2.31 2.44
Optimal Dirt Loading:
8 GPM Per Filter
CLEAN PRESSURE DROP (PSID)*
Maximum Recommended Per 10” length
Differential Pressure:
35 PSID FILTER MODEL 0.5 2 5 10 20 40 70 100

PSID @ 2 GPM 1.30 0.42 0.24 0.23 0.21 0.19 0.19 0.14
Data based on Filtration Technology Corporation Research
and Development Center’s standard test procedure, a
modified version of ISO 19438. PSID @ 4 GPM 4.57 0.52 0.49 0.47 0.46 0.46 0.41 0.35
The procedure uses ISO Standard test dust and deionized
water as the challenge slurry. The reported data is based PSID @ 6 GPM 7.64 1.79 1.07 1.04 1.01 0.77 0.60 0.52
on the polypropylene elements.
PSID @ 8 GPM 10.4 2.80 1.69 1.67 1.65 1.40 1.29 1.15

CARTRIDGE CODING

ABP 10 C 3 3
ABSOLUTE SERIES MICRON RATING MEDIA LENGTH END CAP
336 STYLE 99.98%

0.5 - 0.5 Micron C - Cellulose 3 - 36" 1 - DOE

02 - 2 Micron G - Glass 3 - SOE w/ Spring
05 - 5 Micron P - Polypropylene
10 - 10 Micron R - Polyester
20 - 20 Micron N - Nylon
40 - 40 Micron
70 - 70 Micron
100 - 100 Micron

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court
Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com

8
 ABY SERIES
FILTERS
Brochure Code ABY-001-09-12

COST EFFECTIVE FILTRATION

FTC’s ABY & ABZ pleated cartridges are
designed to efficiently remove a large range of
solids from gas or liquid process streams. Each
cartridge has a pleated, fixed pore media which
maximizes effective surface area while
preventing particle unloading and fiber
migration. Absolute media micron ratings
between 0.5 to 100 micron Beta 5000.
The ABY model is an alternative to the Pall’s®
MCC1401 style cartridge and the ABZ is an
alternative for Porous Media’s 37390 style
cartridge.
BENEFITS
• Heavy duty construction provides up to 75
PSID of allowable differential pressure for high
pressure gas applications.
• Design allows for easy installation and
extraction resulting in an operator friendly
element.
• Internal o-ring seal to ensure positive capture
of contaminants. DIMENSIONS
• Absolute rated media with fixed pore structure
prevents particle unloading and provides Outside Diameter: 3.75”
reliable results in critical applications. Inside Diameter: 2.2” or 1.9”
• Superior methods of construction combined Length: 40”
with excellent quality control, ensure FTC’s
ABY and ABZ cartridges will provide quality
filtration in difficult operating conditions. MATERIALS OF CONSTRUCTION

COMMON APPLICATIONS Filter Media: Cellulose, Polypropylene, Micro-Fiberglass,

Polyester or Nylon
Center Core: Tinned Steel
• Dry Gas Particle Filtration, Amines, Glycols,
Netting: Polypropylene or Nylon
Completion Fluids, Brines, Waterflood, Produced
End Caps: Tinned Steel
Water, Disposal Water

FILTRATION TECHNOLOGY CORPORATION

9
 PRODUCT MEDIA MICRON RATING AT EFFICIENCY
SPECIFICATIONS
FILTER MODEL 0.5 2 5 10 20 40 70 100
Micron Ratings @ 99.98% (beta 5000):
0.5, 2, 5, 10, 20, 40, 70 and 100 Micron 99.00% (beta 100) 0.3 1 2 5 10 25 40 70

99.98% (beta 5000) 0.5 2 5 10 20 40 70 100

Surface Area:
Up to 44 ft² Per Filter

Maximum Operating Conditions: DIRT HOLDING CAPACITY (LBS)*

185°F (85°C) Continuous Operating Temp Per 40” Filter

FILTER MODEL 0.5 2 5 10 20 40 70 100

Recommended Flow Rate for
Optimal Dirt Loading: Pounds of Solids 2.8 3.4 3.58 3.58 3.58 3.69 3.85 4.07
20 GPM Per Filter

Recommended Change-out
Differential Pressure:
CLEAN PRESSURE DROP (PSID)*
Per 40” Filter
35 PSID
FILTER MODEL 0.5 2 5 10 20 40 70 100
Maximum Recommended
Differential Pressure: PSID @ 20 GPM 1.30 0.42 0.24 0.23 0.21 0.19 0.19 0.14
75 PSID
PSID @ 40 GPM 4.57 0.52 0.49 0.47 0.46 0.46 0.41 0.35

Data based on Filtration Technology Corporation Research PSID @ 60 GPM 7.64 1.79 1.07 1.04 1.01 0.77 0.60 0.52
and Development Center’s standard test procedure, a
modified version of ISO 19438. The procedure uses ISO
Standard test dust and deionized water as the challenge PSID @ 80 GPM 10.4 2.80 1.69 1.67 1.65 1.40 1.29 1.15
slurry. The reported data is based on the polypropylene
elements.

CARTRIDGE CODING

ABY 10 C 4 2
ABSOLUTE SERIES MICRON RATING MEDIA LENGTH END CAP
99.98%

ABY - 3.75” w/ 139 O-Ring

0.5 - 0.5 Micron C - Cellulose 4 - 40.00” 2 - Internal
Pall® MCC1401 Alternative O-Ring
02 - 2 Micron G - Glass
ABZ - 3.75” w/ 134 O-Ring 05 - 5 Micron P - Polypropylene
PM™ 37390 Alternative 10 - 10 Micron R - Polyester

20 - 20 Micron N - Nylon

40 - 40 Micron

70 - 70 Micron

100 - 100 Micron

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court

Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com
10
 AB 430 SERIES
FILTERS
Brochure Code AB430-001-09-12

COST EFFECTIVE FILTRATION

FTC introduces its AB-430 Series absolute
rated filter cartridge. Each cartridge has a fixed
pore media with a pleat designed to maximize
effective surface area and dirt holding capacity
while preventing particle unloading and fiber
migration.
Available in a wide variety of filter media, this
cartridge can be constructed with acetal end
caps and a tinned steel core for fuel or high
temperature applications.

BENEFITS
• Designed to replace industry standard 4.25”
OD filter elements
• Dirt holding capacity is maximized in media
selection and pleat design
• Wide-range of media and hardware options
allows for compatibility with almost any fluid
DIMENSIONS
• Ergonomic design allows for easy installation
and extraction resulting in an operator friendly
Outside Diameter: 4.25”
element
Inside Diameter: 1.5”
• Dual o-ring seal to ensure positive capture of
Length: 40” (nominal)
contaminants
• Absolute rated media with fixed pore structure
prevents particle unloading and provides
reliable results in critical applications MATERIALS OF CONSTRUCTION
Filter Media: Cellulose, Polypropylene, Micro-Fiberglass,
COMMON APPLICATIONS Polyester, and Nylon
Center Core: Polypropylene, Tinned Steel and
• Amines, Glycols, Sour Water, Acids, Bases, Stainless Steel
Diesel, Naphtha, LCO, Fuels, Pre-RO, Brines, Netting: Polypropylene and Nylon
Waterflood, Produced Water, Disposal Water End Caps: Polypropylene, Acetal and Tinned Steel

FILTRATION TECHNOLOGY CORPORATION

11
 PRODUCT MEDIA MICRON RATING AT EFFICIENCY
SPECIFICATIONS
FILTER MODEL 430 431 433 435 437 438 439 4310
Micron Ratings @ 99.98% (beta 5000):
0.5, 2, 5, 10, 20, 40, 70 and 100 Micron 99.00% (beta 100) 0.3 1 2 5 10 25 40 70

99.98% (beta 5000) 0.5 2 5 10 20 40 70 100

Surface Area:
Up to 45 ft² per standard 40” filter

Maximum Operating Conditions: DIRT HOLDING CAPACITY (LBS)*

185°F (85°C) Continuous Operating Temp Per standard 40” filter

FILTER MODEL 430 431 433 435 437 438 439 4310
Recommended Flow Rate for
Optimal Dirt Loading: Pounds of Solids 4.15 4.92 5.27 5.27 5.45 5.53 5.80 6.15
25 GPM Per 40” standard filter

Maximum Recommended Flow Rate:

80 GPM Per standard 40” filter
CLEAN PRESSURE DROP (PSID)*
Per standard 40” filter

Maximum Recommended FILTER MODEL 430 431 433 435 437 438 439 4310
Differential Pressure:
35 PSID PSID @ 15 GPM 1.03 0.47 0.34 0.34 0.33 0.30 0.29 0.28

PSID @ 25 GPM 1.57 0.74 0.60 0.60 0.58 0.56 0.51 0.47
Data based on Filtration Technology Corporation
Research and Development Center’s standard test PSID @ 35 GPM 1.78 0.95 0.88 0.88 0.88 0.87 0.83 0.81
procedure, a modified version of ISO 19438.
The procedure uses ISO Standard test dust and PSID @ 45 GPM 2.42 1.33 1.12 1.07 1.03 0.97 0.91 0.89
deionized water as the challenge slurry. The
reported data is based on the polypropylene
elements.

CARTRIDGE CODING

AB 435 P P 40 6 E
ABSOLTUTE RATED MICRON RATING NON-MEDIA MEDIA LENGTH END CAP O-RING
FILTER SERIES 99.98% COMPONENTS

430 - 0.5 Micron *P - Polypropylene C - Cellulose 40 - 40" 6 - 226 O-Ring E - EPDM

431 - 2 Micron L – Acetal G - Glass B - Buna

433 - 5 Micron M – Tinned Steel P - Polypropylene V - Viton®

435 - 10 Micron R - Polyester

437 - 20 Micron N - Nylon

438 - 40 Micron

439 - 70 Micron
* The raw polypropylene materials composing these filters are
4310 - 100 Micron FDA compliant according to CFR Title 21.

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court
Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com

12
 AB 500 SERIES
FILTERS
Brochure Code AB500-001-05-13

COST EFFECTIVE FILTRATION

FTC introduces its AB-500 Series absolute
rated filter cartridge. Each cartridge has a fixed
pore media with a pleat designed to maximize
effective surface area and dirt holding capacity
while preventing particle unloading and fiber
migration.
Available in a wide variety of filter media, this
cartridge can be constructed with nylon,
polyester and tinned steel end caps and tin core
for high temperature applications.

BENEFITS
• Designed to replace industry standard 5.00”
OD filter elements
• Dirt holding capacity is maximized in media
selection and pleat design
• Wide-range of media and hardware options DIMENSIONS
allows for compatibility with almost any fluid
• High Temperature applications Outside Diameter: 5.00”
• Ergonomic design allows for easy installation Inside Diameter: 2.50”
and extraction resulting in an operator friendly Length: 40” (nominal)
element
• Fixed pore media prevents particle unloading
• Absolute Rated media for reliable results in MATERIALS OF CONSTRUCTION
any critical application
Filter Media: Cellulose, Polypropylene, Micro-Fiberglass,
Polyester, and Nylon
COMMON APPLICATIONS Center Core: Tinned Steel and Stainless Steel
Netting: Polypropylene and Nylon
• Amines, Glycols, Sour Water, Acids, Bases, End Caps: Nylon, Polyester and Tinned Steel
Diesel, Naphtha, LCO, Fuels, Pre-RO, Brines,
Waterflood, Produced Water, Disposal Water

FILTRATION TECHNOLOGY CORPORATION

13
 PRODUCT MEDIA MICRON RATING AT EFFICIENCY
SPECIFICATIONS
FILTER MODEL 500 501 503 505 507 508 509
Micron Ratings @ 99.98% (beta 5000):
99.00% (beta 100) 0.3 1 2 5 10 25 40
0.5, 2, 5, 10, 20, 40 and 70 Micron
99.98% (beta 5000) 0.5 2 5 10 20 40 70
Surface Area:
Up to 45 ft² per standard 40” filter
DIRT HOLDING CAPACITY (LBS)*
Maximum Operating Conditions: Per standard 40” filter
185°F (85°C) Continuous Operating Temp
FILTER MODEL 500 501 503 505 507 508 509

Recommended Flow Rate for Pounds of Solids 4.15 4.92 5.27 5.27 5.45 5.53 5.80
Optimal Dirt Loading:
25 GPM Per 40” standard filter
CLEAN PRESSURE DROP (PSID)*
Maximum Recommended Per standard 40” filter
Differential Pressure:
FILTER MODEL 500 501 503 505 507 508 509
35 PSID
PSID @ 15 GPM 1.03 0.47 0.34 0.34 0.33 0.30 0.29
Data based on Filtration Technology Corporation PSID @ 25 GPM 1.57 0.74 0.60 0.60 0.58 0.56 0.51
Research and Development Center’s standard test
procedure, a modified version of ISO 19438. PSID @ 35 GPM 1.78 0.95 0.88 0.88 0.88 0.87 0.83
The procedure uses ISO Standard test dust and
deionized water as the challenge slurry. The PSID @ 45 GPM 2.42 1.33 1.12 1.07 1.03 0.97 0.91
reported data is on the polypropylene elements.

CARTRIDGE CODING

AB 505 N P 40 4 E
ABSOLTUTE RATED MICRON RATING NON-MEDIA MEDIA LENGTH END CAP O-RING
FILTER SERIES 99.98% COMPONENTS

500 - 0.5 Micron N - Nylon C - Cellulose 40 - 40" 4 - External E - EPDM

O-Ring
501 - 2 Micron P - Polyester G - Glass B - Buna

503 - 5 Micron M – Tinned Steel P - Polypropylene V - Viton®

505 - 10 Micron R - Polyester

507 - 20 Micron

508 - 40 Micron

509 - 70 Micron

510 - 100 Micron

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court

Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com
14
 PLATINUM SELECT
740 SERIES FILTERS
Brochure Code PSS-001-10-12

COST EFFECTIVE FILTRATION

The original FTC 700 style Platinum Design has
been re-engineered to provide a greater range of
micron ratings and more dirt holding capacity.
The introduction of a specific pre-filtration depth
media, in conjunction with more efficient flow
channels and flow chambers, provides amazing
results. This combination optimizes the effective
filtration surface area of the pleated filter media
while maximizing dirt holding capacity.
Available in a wide variety of filter media, these
next generation cartridges can be constructed with
metal or non-polypropylene components for
applications that involve higher temperatures.
BENEFITS
• Highest dirt holding capacity in 740 style
cartridge
• Wide-range of media and hardware options
allows for compatibility with almost any fluid
• Broad range of micron ratings and
efficiencies
• Ergonomic design allows for easy installation DIMENSIONS
and extraction resulting in an operator friendly
element Outside Diameter: 6.25”
• Absolute rated media with fixed pore structure Inside Diameter: 1.55”
prevents particle unloading and provides Length: 40” and 30”
reliable results in critical applications
• Superior methods of construction combined
with excellent quality control, ensure FTC MATERIALS OF CONSTRUCTION
Platinum Select cartridges will provide quality
Filter Media: Cellulose, Polypropylene, Glass, Nylon or
filtration in difficult operating conditions
Polyester
COMMON APPLICATIONS Center Core: Polypropylene, Tinned Steel, Stainless Steel
Netting: Polypropylene or Nylon
• Amines, Glycols, Acids, Bases, Fuels, Pre-RO, End Caps: Polypropylene, Tinned Steel, Stainless Steel
Completion Fluids, Brines, Waterflood, Produced
Water, Disposal Water

FILTRATION TECHNOLOGY CORPORATION

15
 PRODUCT MEDIA MICRON RATING AT EFFICIENCY

SPECIFICATIONS FILTER MODEL 74D 74E 74F 74G 74H 74J 74K 74L 74M 74N

Micron Ratings @ 99.98% (beta 5000): 99.00% (beta 100) 0.3 1 2 5 10 15 25 40 70 100
0.5, 2, 5, 10, 20, 30, 40, 70, 100
and 135 Micron 99.98% (beta 5000) 0.5 2 5 10 20 30 40 70 100 135

Maximum Operating Conditions:

185°F (85°C) Continuous Operating Temp DIRT HOLDING CAPACITY (LBS)*
Based on Standard 40” filter element

Recommended Flow Rate for FILTER MODEL 74D 74E 74F 74G 74H 74J 74K 74L 74M 74N
Optimal Dirt Loading:
40 GPM Per standard 40” filter Pounds of Solids 16.5 18.9 21.5 21.6 22 22.4 23.1 24.3 24.5 24.7

Maximum Recommended Flow Rate:

100 GPM Per standard 40” filter CLEAN PRESSURE DROP (PSID)*
Based on Standard 40” filter element
Maximum Recommended
FILTER MODEL 74D 74E 74F 74G 74H 74J 74K 74L 74M 74N
Differential Pressure:
35 PSID
PSID @ 20 GPM 0.93 0.62 0.24 0.21 0.19 0.19 0.19 0.19 0.19 0.19
Data based on Filtration Technology Corporation
Research and Development Center’s standard test PSID @ 40 GPM 1.78 1.14 0.87 0.85 0.81 0.79 0.78 0.78 0.78 0.76
procedure, a modified version of ISO 19438.
The procedure uses ISO Standard test dust and PSID @ 60 GPM 2.97 2.24 1.71 1.67 1.67 1.67 1.67 1.67 1.66 1.63
deionized water as the challenge slurry. The
reported data is based on the polypropylene PSID @ 80 GPM 5.63 3.77 2.53 2.36 2.34 2.33 2.25 2.25 2.22 2.19
elements.

CARTRIDGE CODING

PSS 74K P P 40 6 E
PLATINUM MICRON RATING NON-MEDIA
SELECT SERIES 99.98% COMPONENTS MEDIA LENGTH END CAP O-RING SEAL

74D - 0.5 Micron *P - Polypropylene C - Cellulose 40 - 40” 6 - 226 B - Buna

74E - 2 Micron M - Carbon Steel G - Glass 30 - 30” 3 - R-P Style E - EPDM

74F - 5 Micron S - 304 Stainless N - Nylon V - Viton®

74G - 10 Micron P - Polypropylene

74H - 20 Micron R - Polyester

74J - 30 Micron

74K - 40 Micron

74L - 70 Micron

74M - 100 Micron

74N -135 Micron

* The raw polypropylene materials composing these filters are
FDA compliant according to CFR Title 21.

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court
Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com

16
 PREMIUM DEEP PLEAT
740 SERIES FILTERS Brochure Code PDP-001-10-12

COST EFFECTIVE FILTRATION

FTC is pleased to introduce its Premium Deep
Pleat 700 style cartridge.
The original FTC Deep Pleat design has been
re-engineered to provide a greater range of
micron ratings and more dirt holding capacity.
Available in cellulose and polypropylene filter
media,
di these
h next generation
i cartridges
id can be
b
constructed with metal or non-polypropylene
components for applications that involve
higher temperatures.

BENEFITS
• Provides much greater dirt holding that
standard industry deep pleat elements
• Economical 740 style filter element
• Polypropylene and Cellulose medias will
cover most filtration applications
• Ergonomic design allows for easy installation
and extraction resulting in an operator friendly
element DIMENSIONS
• Dual o-ring seal to ensure positive capture of
contaminants Outside Diameter: 6.25”
• Absolute rated media with fixed pore structure Inside Diameter: 1.55”
prevents particle unloading and provides Length: 40”
40
reliable results in critical applications

MATERIALS OF CONSTRUCTION
COMMON APPLICATIONS
Filter Media: Cellulose and Polypropylene
• Amines, Glycols, Acids, Bases, Fuels, Pre-RO, Center Core: Polypropylene,
yp py , Tinned Steel,, Stainless Steel
Completion Fluids, Brines, Waterflood, Produced Netting: Polypropylene, Nylon
Water, Disposal Water End Caps: Polypropylene, Tinned Steel, Stainless Steel

FILTRATION TECHNOLOGY CORPORATION

17
 PRODUCT MEDIA MICRON RATING AT EFFICIENCY
SPECIFICATIONS FILTER MODEL 74F 74G 74H 74J 74K 74L 74M 74N
Micron Ratings @ 99.98% (beta 5000): 99.00% (beta 100) 2 5 10 15 25 40 70 100
5, 10, 20, 30, 40, 70, 100 and 135 Micron
99.98% (beta 5000) 5 10 20 30 40 70 100 135
Maximum Operating Conditions:
185°F (85°C) Continuous Operating Temp
DIRT HOLDING CAPACITY (LBS)*
Recommended Flow Rate for Per Standard 40” Filter
Optimal Dirt Loading: FILTER MODEL 74F 74G 74H 74J 74K 74L 74M 74M
40 GPM Per
P standard
d d 40” fil
filter
Pounds of Solids 15.3 15.5 17.3 17.8 18.4 19.2 19.4 19.6
Maximum Recommended Flow Rate :
100 GPM Per standard 40” filter
CLEAN PRESSURE DROP (PSID)*
Per Standard 40” Filter
Maximum Recommended
Differential Pressure: FILTER MODEL 74F 74G 74H 74J 74K 74L 74M 74N
35 PSID
PSID @ 20 GPM 0.29 0.26 0.24 0.24 0.24 0.24 0.22 0.22
Data based on Filtration Technology Corporation
PSID @ 40 GPM 0.94 0.90 0.86 0.84 0.83 0.83 0.81 0.81
Research and Development Center’s standard test
procedure, a modified version of ISO 19438. 1.81 1.77 1.77 1.77 1.77 1.77 1.76 1.73
The procedure uses ISO Standard test dust and PSID @ 60 GPM
deionized water as the challenge slurry. The 2.75 2.61 2.57 2.55 2.50 2.50 2.46 2.43
PSID @ 80 GPM
reported data is on the polypropylene elements.

CARTRIDGE CODING

PDP 74K P P 40 6 E
PREMIUM DEEP MICRON RATING NON-MEDIA O-RING
PLEAT SERIES 99.98% COMPONENTS MEDIA LENGTH END CAP SEAL

74F - 5 Micron *P - Polypropylene C - Cellulose 40 - 40” 6 - 226 O-ring E - EPDM

74G - 10 Micron M - Carbon Steel P - Polypropylene 30 - 30" 3 - RP Style B - Buna

74H - 20 Micron S - 304 Stainless V - Viton®

74J - 30 Micron

74K - 40 Micron

74L - 70 Micron
Mi

74M - 100 Micron * The raw polypropylene materials composing these filters are
FDA compliant according to CFR Title 21.
74N - 135 Micron

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court
Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com

18
 PLATINUM
940 SERIES FILTERS
Brochure Code PS940-001-05-13

COST EFFECTIVE FILTRATION

The unique design, U.S. Patent No. 5824232, in
FTC’s 940 PLATINUM Series absolute rated filter
cartridge uses segregated flow channels and flow
chambers to maximize the effective surface area of
the pleated filter media within a 12.75 inch OD
cartridge. Combining this design with the
technique of pleating several different filter media
together in a single pleat pack maximizes dirt
holding capacity.
One 940 PLATINUM Series filter is designed to
have the dirt holding capacity of 50 standard 2.5
inch OD pleated cartridges of similar length. With
a recommended flow rate of 150 GPM, this FTC
PLATINUM Series filter is the solution to
achieving optimum performance while minimizing
filtration costs.

BENEFITS
• Provides significantly greater dirt holding
capacity than traditional industry size
cartridges
• High concentration of surface area and dirt
holding capacity into one cartridges allows for
small vessel footprint in sensitive applications DIMENSIONS
• Wide-range of media options allows for
compatibility with most fluids Outside Diameter: 12.75”
• Constructed with metal end caps and core for Inside Diameter: 3.00”
high temperature applications Length: 40”
• Absolute rated media with fixed pore structure
prevents particle unloading and provides MATERIALS OF CONSTRUCTION
reliable results in critical applications
COMMON APPLICATIONS Filter Media: Cellulose, Polypropylene, Glass, Nylon or
Polyester
Center Core: Tinned Steel or Stainless Steel
• Fuels, Pre-RO, Completion Fluids, Brines,
Netting: Polypropylene or Nylon
Waterflood, Produced Water, Disposal Water
End Caps: Tinned Steel or Stainless Steel

FILTRATION TECHNOLOGY CORPORATION

19
 PRODUCT
SPECIFICATIONS MEDIA MICRON RATING AT EFFICIENCY

Micron Ratings @ 99.98% (beta 5000): FILTER MODEL 940 941 943 945 947 948 949
0.5, 2, 5, 10, 20, 40 and 70 Micron
99.00% (beta 100) 0.3 1 2 5 10 25 40
Maximum Operating Conditions:
185°F (85°C) Continuous Operating Temp 99.98% (beta 5000) 0.5 2 5 10 20 40 70

Recommended Flow Rate for

Optimal Dirt Loading: DIRT HOLDING CAPACITY (LBS)*
150 GPM Per standard 40” filter Based on Standard 40” filter element

FILTER MODEL 940 941 943 945 947 948 949

Maximum Recommended Flow Rate:
300 GPM Per standard 40” filter Pounds of Solids 55 76 80 83 85 100 100

Maximum Recommended
Differential Pressure:
35 PSID CLEAN PRESSURE DROP (PSID)*
Based on Standard 40” filter element

Data based on Filtration Technology Corporation FILTER MODEL 940 941 943 945 947 948 949
Research and Development Center’s standard test
procedure, a modified version of ISO 19438. 1.58 1.05 0.61 0.54 0.50 0.46 0.40
PSID @ 150 GPM
The procedure uses ISO Standard test dust and
deionized water as the challenge slurry. The 6.20 4.15 2.54 2.25 2.03 1.85 1.76
PSID @ 300 GPM
reported data is based on the polypropylene
elements.

CARTRIDGE CODING

PS 941 P 40 5 E
PLATINUM
MICRON RATING NON-MEDIA
940 SERIES MEDIA LENGTH END CAP O-RING SEAL
99.98% COMPONENTS

940 - 0.5 Micron None - Carbon Steel C - Cellulose 40 - 40” 5 – Dual o-ring B - Buna

941 - 2 Micron S - 304 Stainless G - Glass E - EPDM

943 - 5 Micron N - Nylon V - Viton®

945 - 10 Micron P - Polypropylene

947 - 20 Micron R - Polyester

948 - 40 Micron

949 - 70 Micron

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court
Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com

20
 PLATINUM
2040 SERIES FILTERS
Brochure Code PS2040-001-05-13

COST EFFECTIVE FILTRATION

The unique design, U.S. Patent No. 5824232, in
FTC’s 2040 PLATINUM Series absolute rated
filter cartridge uses segregated flow channels and
flow chambers to maximize the effective surface
area of the pleated filter media within a 20.00 inch
OD cartridge. Combining this design with the
technique of pleating several different filter media
together in a single pleat pack maximizes dirt
holding capacity.
One 2040 PLATINUM Series filter is designed to
have the dirt holding capacity of 150 standard 2.5
inch OD pleated cartridges of similar length. With
a recommended flow rate of 450 GPM, this FTC
PLATINUM Series filter is the solution to
achieving optimum performance while minimizing
filtration costs.
BENEFITS
• FTC’s highest dirt holding capacity cartridge
• Provides significantly greater dirt holding
capacity than traditional industry size
cartridges
•High concentration of surface area and dirt
holding capacity into one cartridges allows for DIMENSIONS
small vessel footprint in sensitive applications
• Wide-range of media options allows for Outside Diameter: 20.0”
compatibility with most fluids Inside Diameter: 3.00” or 6.00”
• Constructed with metal end caps and core for Length: 40”
high temperature applications
• Absolute rated media with fixed pore structure
prevents particle unloading and provides
MATERIALS OF CONSTRUCTION
reliable results in critical applications.
Filter Media: Cellulose, Polypropylene, Glass, Nylon or
Polyester
COMMON APPLICATIONS
Center Core: Tinned Steel or Stainless Steel
Netting: Polypropylene or Nylon
• Fuels, Pre-RO, Completion Fluids, Brines,
End Caps: Tinned Steel or Stainless Steel
Waterflood, Produced Water, Disposal Water

FILTRATION TECHNOLOGY CORPORATION

21
 PRODUCT
MEDIA MICRON RATING AT EFFICIENCY
SPECIFICATIONS
Micron Ratings @ 99.98% (beta 5000): FILTER MODEL 2040 2041 2043 2045 2047 2048 2049
0.5, 2, 5, 10, 20, 40 and 70 Micron
99.00% (beta 100) 0.3 1 2 5 10 25 40

Maximum Operating Conditions:

99.98% (beta 5000) 0.5 2 5 10 20 40 70
185°F (85°C) Continuous Operating Temp

Recommended Flow Rate for

Optimal Dirt Loading: DIRT HOLDING CAPACITY (LBS)*
150 GPM Per standard 40” filter Based on Standard 40” filter element

FILTER MODEL 2040 2041 2043 2045 2047 2048 2049

Maximum Recommended Flow Rate:
300 GPM Per standard 40” filter Pounds of Solids 165 230 230 250 265 300 300

Maximum Recommended
Differential Pressure:
35 PSID CLEAN PRESSURE DROP (PSID)*
Based on Standard 40” filter element w/ 6” ID

Data based on Filtration Technology Corporation FILTER MODEL 2040 2041 2043 2045 2047 2048 2049
Research and Development Center’s standard test
procedure, a modified version of ISO 19438. 1.50 1.00 0.58 0.51 0.47 0.44 0.38
PSID @ 450 GPM
The procedure uses ISO Standard test dust and
deionized water as the challenge slurry. The 5.90 3.94 2.41 2.13 1.93 1.76 1.67
PSID @ 900 GPM
reported data is based on the polypropylene
elements.

CARTRIDGE CODING

PS 2041 P 40 5 E
PLATINUM
MICRON RATING NON-MEDIA O-RING
2040 SERIES MEDIA LENGTH END CAP
99.98% COMPONENTS SEAL

5 – Dual o-ring
2040 - 0.5 Micron None - Carbon Steel C - Cellulose 40 - 40” B - Buna
(3” ID)
X – Internal o-ring
2041 - 2 Micron S - 304 Stainless G - Glass (6” ID) E - EPDM

2043 - 5 Micron N - Nylon V - Viton®

2045 - 10 Micron P - Polypropylene

2047 - 20 Micron R - Polyester

2048 - 40 Micron

2049 - 70 Micron

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court
Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com

22
 DPU 600 HIGH-FLOW
SERIES FILTERS
Series Code DPU-600-001-10-12

COST EFFECTIVE FILTRATION

FTC introduces its DPU-600 High Flow Series. It
was originally designed for low solids applications
requiring high flow rates, but it is a great option for
almost any application.
The unique design of this pleated element provides
a large effective filter surface area within the space
constraints of a standard 6” cartridge diameter
while flow is maximized through the use of a large
ID.
The DPU-600 High Flow Series element is
designed to fit inside existing housings and provide
an positive o-ring seal without housing
modification
BENEFITS
• Significantly greater dirt holding capacity
than standard bag filters.
• Design allows for easy installation and
extraction resulting in an operator friendly
element.
• As a result of the inside to outside flow path,
all filtered contaminant is contained inside the
element for clean disposal.
DIMENSIONS
• O-ring seal to ensure positive capture of
contaminants.
Outside Diameter: 6.00”
• Absolute rated media with fixed pore structure
Inside Diameter: 3.00”
prevents particle unloading and provides
Length: 20”, 40” and 60”
reliable results in critical applications.
• Superior methods of construction combined MATERIALS OF CONSTRUCTION
with excellent quality control, ensure FTC High
Flow cartridges will provide quality filtration Filter Media: Cellulose, Polypropylene, Glass, Nylon and
in difficult operating conditions. Polyester
Center Core: Polypropylene and Polyester
COMMON APPLICATIONS Netting: Polypropylene, Nylon and Tinned Steel,
Stainless Steel or Aluminum Can Body
• Fuels, NGLs, LPG, Pipeline Pigging, Pre-RO, End Caps: Polypropylene, Acetal, Nylon, Tinned Steel
Completion Fluids, Brines, Produced Water, and Stainless Steel
Disposal Water

FILTRATION TECHNOLOGY CORPORATION

23
 PRODUCT MEDIA MICRON RATING AT EFFICIENCY

SPECIFICATIONS FILTER MODEL 600 601 603 605 607 608 609 610 611
Micron Ratings @ 99.98% (beta 5000): 99.00% (beta 100) 0.3 1 2 5 10 25 40 70 100
0.5, 2, 5, 10, 30, 40, 70, 100
and 135 Micron 99.98% (beta 5000) 0.5 2 5 10 20 40 70 100 135

Maximum Operating Conditions:

185°F (85°C) Continuous Operating Temp DIRT HOLDING CAPACITY (LBS)*
Per 60” length
Recommended Flow Rate for
Optimal Dirt Loading: FILTER MODEL 600 601 603 605 607 608 609 610 611
75 GPM per standard 60” filter
Pounds of Solids 12.2 15.5 18.2 18.7 20.4 22.5 24.0 26.1 27.5

Maximum Recommended
Flow Rate:
500 GPM per standard 60” filter CLEAN PRESSURE DROP (PSID)*
Per 60” length
Maximum Recommended
Differential Pressure: FILTER MODEL 600 601 603 605 607 608 609 610 611
35 PSID
PSID @ 100 GPM 1.06 0.65 0.54 0.46 0.38 0.33 0.23 0.20 0.17

Data based on Filtration Technology Corporation PSID @ 200 GPM 1.27 0.88 0.67 0.50 0.44 0.41 0.34 0.28 0.25
Research and Development Center’s standard test
procedure, a modified version of ISO 19438. PSID @ 400 GPM 3.22 2.31 1.99 1.77 1.59 1.48 1.30 1.21 1.13
The procedure uses ISO Standard test dust and
deionized water as the challenge slurry. The PSID @ 500 GPM 4.04 3.30 2.85 2.61 2.18 2.03 1.87 1.76 1.65
reported data is based on polypropylene elements.

CARTRIDGE CODING

DPU 600 P P 40 P E
HIGH FLOW MICRON RATING NON-MEDIA MEDIA LENGTH END CAP SEAL
SERIES 99.98% COMPONENTS MATERIAL

600 - 0.5 Micron *P - Polypropylene C - Cellulose 20 - 20” P - High Flow B - Buna

601 - 2 Micron M - Carbon Steel G - Glass 40 - 40" E - EPDM

603 - 5 Micron S - 304 Stainless N - Nylon 60 - 60” V - Viton®

605 - 10 Micron N - Nylon P - Polypropylene S - Silicone

607 - 20 Micron L - Acetal R - Polyester T - TEV

608 - 40 Micron * The raw polypropylene materials composing these filters are
FDA compliant according to CFR Title 21.
609 - 70 Micron

610 - 100 Micron SERIES CODE DESCRIPTIONS

P – 100% FDA Polypro Components except O-Ring seal, Thermally Bonded End Caps (Standard)
611 - 135 Micron N – Nylon End Caps. Carbon Steel Can Body, High Temperature Epoxy
L – Acetal End Caps, Nylon Outer Netting, Thermally Bonded End Caps
M – Carbon Steel End Caps, Carbon Steel Can Body, High Temperature Epoxy
S – 304 SS End Caps, Stainless Steel Can Body, High Temperature Epoxy

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court
Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com

24
 MAXIMUM CAPACITY BAG
650 SERIES FILTERS
Brochure Code MC650-001-05-13

COST EFFECTIVE FILTRATION

FTC introduces its next generation of Pleated
Bag filters, the 650 Maximum Capacity style
bag.
The original FTC Platinum 650 style bag has
been re-engineered to provide a greater range
of micron ratings and more dirt holding
capacity.
These next generation pleated bags are
constructed with polypropylene components
and are available in a wide variety of filter
media.

BENEFITS
• Highest dirt holding capacity of all bag filter
series
• Highly researched pleat design maximizes dirt
holding capacity and surface area
• Wide-range of media options allows for
compatibility with many fluids
• Broad range of micron ratings and
efficiencies
DIMENSIONS
• Simple installation into existing equipment
without equipment modification Outside Diameter: 7.00”
• Absolute rated media with fixed pore structure Inside Diameter: 2.00”
prevents particle unloading and provides Length: 20” and 26”
reliable results in critical applications
MATERIALS OF CONSTRUCTION
COMMON APPLICATIONS Filter Media: Polypropylene, Glass, Nylon and
Polyester
• Amines, Glycols, Acids, Bases, Pre-RO, Center Core: Polypropylene
Completion Fluids, Brines, Waterflood, CBM Netting: Polypropylene, Polyester, Nylon
Produced Water, Disposal Water End Caps: Polypropylene

FILTRATION TECHNOLOGY CORPORATION

 PRODUCT MEDIA MICRON RATING AT EFFICIENCY
SPECIFICATIONS
FILTER MODEL 65D 65E 65F 65G 65H 65J 65K 65L 65M 65N
99.00% (beta 100) 0.3 1 2 5 10 15 25 40 70 100
Micron Ratings @ 99.98% (beta 5000):
0.3, 0.5, 2, 5, 10, 20, 30, 40, 70, 100 99.98% (beta 5000) 0.5 2 5 10 20 30 40 70 100 135
and 135 Micron

Maximum Operating Conditions:

DIRT HOLDING CAPACITY (LBS)*
185°F (85°C) Continuous Operating Temp

Recommended Flow Rate for FILTER MODEL 65D 65E 65F 65G 65H 65J 65K 65L 65M 65N
Optimal Dirt Loading: 7.1 8.1 8.7 8.8 9.0 9.0 9.2 8.6 9.6 9.6
Pounds of Solids (20”)
25 GPM Per 20” of filter length
35 GPM Per 26” of filter length Pounds of Solids (26”) 9.2 10.5 11.3 11.4 11.7 11.7 12.0 12.0 12.5 12.5

Maximum Recommended Flow Rate:

100 GPM Per standard 20” filter CLEAN PRESSURE DROP (PSID)*
125 GPM Per standard 26” filter Per 26” length

Maximum Recommended FILTER MODEL 65D 65E 65F 65G 65H 65J 65K 65L 65M 65N
Differential Pressure: PSID @ 15 GPM 0.34 0.26 0.22 0.20 0.18 0.16 0.15 0.14 0.13 0.10
20 PSID
PSID @ 25 GPM 0.58 0.47 0.41 0.40 0.37 0.36 0.35 0.32 0.30 0.25
Data based on Filtration Technology Corporation Research
and Development Center’s standard test procedure, a
modified version of ISO 19438. PSID @ 50 GPM 1.18 0.99 0.87 0.85 0.83 0.81 0.79 0.77 0.73 0.64
The procedure uses ISO Standard test dust and deionized
water as the challenge slurry. The reported data is based
on the polypropylene elements.

CARTRIDGE CODING

MC 65E P P 20 1 E
MAX CAPACITY MICRON RATING NON-MEDIA MEDIA LENGTH HOUSING O-RING SEAL
SERIES 99.98% COMPONENTS SEAL

65D - 0.5 Micron *P - Polypropylene P - Polypropylene 20 - 20” 1 - Rosedale B - Buna

65E - 2 Micron G - Glass 26 - 26" 2 - FSI E - EPDM

5 - Over-the-
65F - 5 Micron N - Nylon V - Viton®
Top Style
R - Polyester U - Santoprene™
65G - 10 Micron G - Plenty
**Contact FTC
65H - 20 Micron
for additional
options
65J - 30 Micron

65K - 40 Micron

65L - 70 Micron

65M - 100 Micron * The raw polypropylene materials composing these filters are
FDA compliant according to CFR Title 21.
65N - 135 Micron
** We offer cap styles to seal most housing manufacturers.
Please contact FTC for the proper housing seal cap code.

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court
Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com
 HIGH CAPACITY BAG
550 SERIES
Brochure Code HC550-001-01012

COST EFFECTIVE FILTRATION

FTC introduces its new 550 Series, High
Capacity, pleated filter bag.
The unique design of this pleated bag provides
a large effective filter surface area within the
space constraints of a standard basket. Dirt
holding capacity is maximized by pleating
several different filter media together in a
single pleat pack. One 550 Series, High
Capacity bag holds much more dirt than the
typical 500 Series bag.
The FTC High Capacity bag is designed to fit
inside existing baskets without housing
modification.

BENEFITS
• Provides significantly greater dirt holding
than non-pleated felt and high efficiency bag
filters.
• O-ring seal to ensure positive capture of
contaminants. DIMENSIONS
• Simple installation into existing equipment
without equipment modification. Outside Diameter: 6.25”
• Absolute rated media with fixed pore structure Inside Diameter: 3.00”
prevents particle unloading and provides Length: 20”
reliable results in critical applications.
• Superior methods of construction combined
with excellent quality control, ensure FTC High
MATERIALS OF CONSTRUCTION
Capacity cartridges will provide quality
filtration in difficult operating conditions. Filter Media: Polypropylene
Center Core: Polypropylene
COMMON APPLICATIONS Netting: Polypropylene
End Caps: Polypropylene
• Amines, Glycols, Acids, Bases, Water Seal Material: EPDM

0 CORPORATION
FILTRATION TECHNOLOGY
27
 PRODUCT
MEDIA MICRON RATING AT EFFICIENCY
SPECIFICATIONS
Micron Ratings @ 99.00% (beta 100): FILTER MODEL 552 555 557 558 559
2, 5, 15, 50, 100 Micron 99.00% (beta 100) 2 5 15 50 100

Surface Area:
32 ft² per filter element
DIRT HOLDING CAPACITY (LBS)*
Per Filter Element
Maximum Operating Conditions:
185°F (85°C) Continuous Operating Temp FILTER MODEL 552 555 557 558 559

Pounds of Solids 3.4 4.5 4.9 5.0 5.3

Recommended Flow Rate:
Up to 50 GPM per filter element

Maximum Recommended CLEAN PRESSURE DROP (PSID)*

Per Filter Element
Differential Pressure:
20 PSID FILTER MODEL 552 555 557 558 559

PSID @ 20 GPM 0.13 0.11 0.10 0.10 0.10

Data based on Filtration Technology Corporation
Research and Development Center’s standard test PSID @ 30 GPM 0.25 0.23 0.20 0.17 0.16
procedure, a modified version of ISO 19438.
The procedure uses ISO Standard test dust and PSID @ 40 GPM 0.32 0.31 0.28 0.26 0.24
deionized water as the challenge slurry. The
reported data is on the polypropylene elements PSID @ 50 GPM 0.49 0.47 0.40 0.36 0.30
tested at 25 GPM.

CARTRIDGE CODING

HC 552 P 20 U
HIGH CAPACITY SERIES MICRON RATING MEDIA LENGTH CAP STYLE
(99.00%)

552 - 2 Micron *P - Polypropylene 20 - 20" U - Universal

555 - 5 Micron
557 - 15 Micron
558 - 50 Micron
559 - 100 Micron

* The raw polypropylene materials composing these filters are

FDA compliant according to CFR Title 21.

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court
Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com

28
 NOMINAL BAG
100 SERIES FILTERS
Brochure Code NB100-001-06-18

COST EFFECTIVE FILTRATION

FTC introduces its Series 100 Nominal Pleated Bags.
The introduction of the Series 100 will offer value and
economy for your nominal filtration requirements while
providing the reliability and high performance of a rigid
filter barrel to maintain bag filter integrity.
The Series 100 pleated bag will drain more easily when
changing out than a standard size 2 bag. As a result,
loss of valuable process fluid will be minimized.
Maintaining a rigid structure will eliminate bag bottoms
from falling out.
Constructed with polypropylene or polyester needled
felt media, the FTC Series 100 will offer significantly
more surface area and dirt holding capacity than a
standard size 2 nominal bag, as well as a wide range of
micron ratings.

BENEFITS
• As much as 28 times the dirt holding capacity
of a standard size 2 felt bag
• Proprietary pleat design maximizes dirt
holding capacity and surface area
• Rigid bag structure to maintain integrity of
filter
• Wide-range of micron ratings to meet all your DIMENSIONS
nominal filtration requirements
• Simple installation into existing equipment Outside Diameter: 7.00”
without equipment modification Inside Diameter: 2.00”
• Savings on acquisition and disposal costs and Length: 24”
labor change outs
• Reduced system downtime
MATERIALS OF CONSTRUCTION
COMMON APPLICATIONS Filter Media: Polypropylene and Polyester Needled Felt
Center Core: Polypropylene
• Process fluids, Pre-RO, Water and Wastewater Netting: Polypropylene
reuse, Ground Water Remediation, Machine End Caps: Polypropylene
Coolants, Disposal Water

FILTRATION TECHNOLOGY CORPORATION

 MEDIA MICRON RATING AT EFFICIENCY
PRODUCT
SPECIFICATIONS FILTER MODEL 001 005 010 025 050 100 200

Nominal 1 5 10 25 50 100 200

Nominal Micron Ratings:
1, 5, 10, 25, 50, 100 and 200 Micron DIRT HOLDING CAPACITY (LBS)*

Maximum Operating Conditions: FILTER MODEL 001 005 010 025 050 100 200
185°F (85°C) Continuous Operating Temp
Polypropylene 6.98 5.87 5.79 5.86 5.83 6.02 6.24
Recommended Flow Rate for Polyester 6.63 6.34 6.19 6.58 7.12 6.41 6.55
Optimal Dirt Loading:
25 GPM
CLEAN PRESSURE DROP (PSID)*
Maximum Recommended Flow Rate:
200 GPM FILTER MODEL 001 005 010 025 050 100 200

PSID @ 25 GPM 0.105 0.144 0.028 0.055 0.046 0.043 0.038

Maximum Recommended
Differential Pressure: PSID @ 50 GPM 0.589 0.350 0.236 0.275 0.322 0.346 0.317
25 PSID PSID @ 100 GPM 1.139 1.178 1.172 1.031 1.135 1.153 1.206

Data based on Filtration Technology Corporation Research PSID @ 150 GPM 2.239 2.480 2.640 2.157 2.526 2.513 3.013
and Development Center’s standard test procedure.
The procedure uses ISO Standard test dust and deionized PSID @ 200 GPM 4.214 4.315 4.297 3.888 4.361 4.734 5.101
water as the challenge slurry. The reported data is based
on the polypropylene elements.

CARTRIDGE CODING

NB 005 P P 24 U E
NOMINAL BAG MICRON RATING NON-MEDIA MEDIA LENGTH HOUSING O-RING SEAL
SERIES NOMINAL COMPONENTS SEAL

001 - 1 Micron P - Polypropylene P - Polypropylene 24 - 24” U - Universal B - Buna

005 - 5 Micron R - Polyester E - EPDM

010 - 10 Micron

025 - 25 Micron

050 - 50 Micron

100 - 100 Micron

200 - 200 Micron

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court
Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com
 DPW 600 SERIES
BAG FILTERS
HIGH TEMPERATURE BAG FILTERS
Brochure Code DPW600-001-05-13

COST EFFECTIVE FILTRATION

FTC introduces its DPW-600 Bag filter element
that is designed for high temperature applications
or applications with hydrocarbons in the stream.
Combining this design with the technique of
pleating several different filter media together in a
single pleat pack maximizes dirt holding capacity.
The 600 DPW Series bag is designed to seal inside
Rosedale bag housings without equipment
modification. It is available with different filter
media options to meet industry standards and
chemical compatibility.

BENEFITS
• Provides significantly greater dirt holding
that standard non-pleated bag filters
• High Temperature bag filter applications
• Excellent for bag filter applications with
hydrocarbons in the stream
• Simple installation and extraction makes this
an operator friendly element
• Unlike standard bag filters, this element
drains minimizing residual fluid in the filter
housing DIMENSIONS
• O-ring seal to ensure positive capture of
Outside Diameter: 6.00”
contaminants
Inside Diameter: 3.00”
• Fixed pore media prevents particle unloading
Length: 26”
• Absolute Rated media for reliable results in
any critical application
MATERIALS OF CONSTRUCTION
COMMON APPLICATIONS Filter Media: Cellulose, Glass and Nylon
Potting Material: High Temperature Epoxy
• High temperature, Glycols, Fuels, Various Support: Tinned Steel Can Body
hydrocarbons, Biofuels, Produced Water, Disposal End Caps: Nylon and Polyester
Water

FILTRATION TECHNOLOGY CORPORATION

25
 PRODUCT
SPECIFICATIONS MEDIA MICRON RATING AT EFFICIENCY

FILTER MODEL 600 601 603 605 607 608 609

Micron Ratings @ 99.98% (beta 5000):
0.5, 2, 5, 10, 20, 40, and 70 Micron 99.00% (beta 100) 0.3 1 2 5 10 25 40

99.98% (beta 5000) 0.5 2 5 10 20 40 70

Maximum Operating Conditions:
275°F (85°C) Continuous Operating Temp
DIRT HOLDING CAPACITY (LBS)*
Recommended Flow Rate for Per 26” length
Optimal Dirt Loading:
25 GPM Per 26” of filter length FILTER MODEL 600 601 603 605 607 608 609

Pounds of Solids 4.3 5.1 6 6 6.8 7.7 8.3

Maximum Recommended Flow Rate:
100 GPM Per 26” filter

Maximum Recommended CLEAN PRESSURE DROP (PSID)*

Differential Pressure: Per 26” length

25 PSID
FILTER MODEL 600 601 603 605 607 608 609
Data based on Filtration Technology Corporation
Research and Development Center’s standard test PSID @ 25 GPM 0.55 0.45 0.36 0.30 0.26 0.21 0.19
procedure, a modified version of ISO 19438.
The procedure uses ISO Standard test dust and PSID @ 50 GPM 1.03 0.62 0.51 0.43 0.35 0.30 0.26
deionized water as the challenge slurry. The
reported data is on the cellulose (5-70 micron) or
glass fiber (0.5-2 micron) elements.

CARTRIDGE CODING
DPW 600 N P 26 1 B
DPW SERIES MICRON RATING END CAP MEDIA LENGTH CAP STYLE SEAL
99.98% MATERIAL MATERIAL

600 - 0.5 Micron N - Nylon C - Cellulose 26 - 26” 1 - Rosedale B - Buna

601 - 2 Micron G - Glass E - EPDM

603 - 5 Micron N - Nylon V - Viton®

605 - 10 Micron

607 - 20 Micron
SERIES CODE DESCRIPTIONS
608 - 40 Micron
N – Nylon End Caps. Coreless Can Body, High Temperature Epoxy End Cap Sealing

609 - 70 Micron

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.

Filtration Technology Corporation

5175 Ashley Court
Houston, Texas 77041
(713) 849-0849 • 888-436-0849 • FAX (713) 849-0202
www.ftc-houston.com

26
 240 EMERALD SERIES
ENVIRONMENTAL APPLICATIONS
Brochure Code ES240-001-05-13

COST EFFECTIVE FILTRATION

FTC introduces its 240 Emerald Series “Mini Oil
Guzzler” cartridge for eliminating oil from water.

The media in this unique cartridge combines the

effects of adsorption and absorption to enhance its
oil removal efficiency. Incorporating this media
with flow barriers into standard 2.5 inch OD filter
designs allows retrofits into standard housings.

One 240 “Mini Oil Guzzler” is designed to hold

one liter of oil before reaching the maximum
differential pressure of 35 PSI.

MATERIALS OF CONSTRUCTION
Filter Media: Proprietary Polymer
Center Core: Polypropylene
Netting: Polypropylene
End Caps: Polypropylene
PRODUCT SPECIFICATIONS
COMMON APPLICATIONS Filter Oil Capacity: 1.1 L of oil

Filter Effluent Quality: As low as 5 ppm effluent

• Removing trace amounts of oil from Recommended Flow Rate for
water Optimal Oil Loading: 1.0 GPM Per 40” of filter length
• Final Polishing of Produced Water Maximum Recommended
Differential Pressure: 35 PSID

CARTRIDGE CODING

ES 2 4 9 H 40 2
EMERALD SERIES ABSORPTION LENGTH END CAP
MEDIA

H - Proprietary 30 - 30" 1 - DOE

Polymer
40 - 40” 2 – 222 O-Ring

FILTRATION TECHNOLOGY CORPORATION

31
 740 EMERALD SERIES
ENVIRONMENTAL APPLICATIONS
Brochure Code ES740-001-05-13

COST EFFECTIVE FILTRATION

FTC introduces its 700 EMERALD Series “OIL
GUZZLER” cartridge for eliminating oil from
water.
The media in this unique cartridge combines the
effects of adsorption and absorption to enhance its
oil removal efficiency. Incorporating this media
into a 6.25 inch OD filter design that utilizes
segregated flow chambers and flow barriers results
in maximum oil holding capacity.
One 740 style “OIL GUZZLER” is designed to
hold greater than six liters of oil before reaching
the maximum differential pressure of 35 PSI.

MATERIALS OF CONSTRUCTION
Filter Media: Proprietary Polymer
Center Core: Polypropylene
Netting: Polypropylene
End Caps: Polypropylene
PRODUCT SPECIFICATIONS
COMMON APPLICATIONS Filter Oil Capacity: 6.6 L of oil

Filter Effluent Quality: As low as 5 ppm effluent

• Removing trace amounts of oil from Recommended Flow Rate for
water Optimal Oil Loading: 15 GPM Per 40” of filter length
• Final Polishing of Produced Water Maximum Recommended
Differential Pressure: 35 PSID

CARTRIDGE CODING

ES 7 4 9 H 35 6
EMERALD SERIES ABSORPTION LENGTH END CAP
MEDIA

H - Proprietary 35 - 35" 2 – 226 O-Ring

Polymer
40 - 40”

FILTRATION TECHNOLOGY CORPORATION

32
 COALESCER FILTERS
Liquid/Gas
Brochure Code CLG-001-09-12

COST EFFECTIVE COALESCENCE

FTC made a commitment a few years ago to
develop world class coalescence technology
and now it introduces a new line of gas
coalescer elements. These elements have been
specially engineered to provide the most cost
effective high efficiency liquid coalescence of
gas streams on the market.
The introduction of proprietary interception,
coalescence, and drainage layers pleated in
conjunction with a high efficiency micro-fiber
media ensures high efficiency separation of
sub-micron liquid aerosols from gas streams
while minimizing fluid carry-over.
BENEFITS
• Provides high efficiency removal of unwanted
liquid contaminants
• Available in both 99.98% and 99.0%
efficiencies at various micron ratings
• High surface area providing low pressure drop
• Customized configurations to upgrade
existing vessels and/or new installations

COMMON APPLICATIONS LIQUID-GAS SERIES

• Amine plant feed gas and treated gas
• Suction and discharge of compressors CG28 Series
• Fuel Gas purification Dimensions: 2.75” OD x 1.5” ID x 30” long
• Protection of molecular sieve beds, alumina beds, Gas Micron Ratings: 0.1 & 0.3 micron @ both 99.0% and 99.98%
activated carbon beds, flare systems, and metering
systems CG40 Series
• Turbine feed gas Dimensions: 4.5” OD x 3.25” ID x 36” long
Gas Micron Ratings: 0.1 & 0.3 micron @ both 99.0% and 99.98%
COMMON LIQUID CONTAMINANTS
• Compressor lubrication oils, water, hydrocarbon CG60 Series
condensates, Amines, Glycols, Solvents, Completion Dimensions: 6.0” OD x 3.25” ID x 40” long
Fluids, Brine, and other liquid phase contaminates Gas Micron Ratings: 0.1 & 0.3 micron @ both 99.0% and 99.98%

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user
Coalescer elements testing is performed internally and externally and is based on a modification of the ISO 12500 standards.

FILTRATION TECHNOLOGY CORPORATION

33
 CG28 SERIES
Liquid/Gas
Brochure Code CLG28-001-09-12

COST EFFECTIVE COALESCENCE

These elements have been specially engineered
to provide the most cost effective high
efficiency liquid coalescence of gas streams on
the market.
The introduction of proprietary interception,
coalescence, and drainage layers pleated in
conjunction with a high efficiency micro-fiber
media ensures high efficiency separation of
sub-micron liquid aerosols from gas streams
while minimizing fluid carry-over.
FEATURES AND BENEFITS
• Provides high efficiency removal of unwanted
liquid contaminants
• Available in both 99.98% and 99.0%
efficiency ratings
• High surface area providing low pressure drop
• Designed to upgrade existing vessels or to be
specified in new installations
• Standard version and amine compatible
version available
• Buna and Viton® gaskets used as standard
sealing elastomers (other materials available) ELEMENT DIMENSIONS

COMMON APPLICATIONS Outside Diameter: 2.75”

• Amine plant feed gas and treated gas Inside Diameter: 1.5”
• Suction and discharge of compressors Length: 30”
• Fuel Gas purification
• Protection of molecular sieve beds, alumina beds, ELEMENT CODING
activated carbon beds, flare systems, and metering
systems CG28-001-TG301B
• Turbine feed gas Micron 99.98% 99.00%
Rating Efficiency Efficiency
COMMON LIQUID CONTAMINANTS
0.1 Micron 001 001A
• Compressor lubrication oils, water, hydrocarbon
condensates, Amines, Glycols, Solvents, Completion 0.3 Micron 003 003A
Fluids, Brine, and other liquid phase contaminates
Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The
determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user
coalescer element testing is performed internally and externally and is based on a modification of the ISO 12500 standards.

FILTRATION TECHNOLOGY CORPORATION

34
 CG40 SERIES
Liquid/Gas
Brochure Code CLG40-001-02-13

COST EFFECTIVE COALESCENCE

These elements have been specially engineered
to provide the most cost effective high
efficiency liquid coalescence of gas streams on
th market.
the k t
The introduction of proprietary interception,
coalescence, and drainage layers pleated in
conjunction with a high efficiency micro-fiber
media ensures high efficiency separation of
sub-micron liquid aerosols from gas streams
while minimizing fluid carry-over.

FEATURES AND BENEFITS

• Direct upgrade for most common liquid gas
coalescing element on the market
• Provides high efficiency removal of unwanted
liquid contaminants
• Available in both 99.98% and 99.0%
efficiency ratings
• High surface area providing low pressure drop
• Available in double open ended (DOE) or
single open ended (SOE) cap styles
• Buna and Viton® ggaskets used as standard ELEMENT DIMENSIONS
sealing elastomers (other materials available)
Outside Diameter: 4.50”
COMMON APPLICATIONS Inside Diameter: 3.25”
• Amine plant feed gas and treated gas Length: 36”
• Suction and discharge of compressors
• Fuel Gas purification
• Protection of molecular sieve beds
beds, alumina beds
beds, COALESCER ELEMENT CODING
activated carbon beds, flare systems, and metering CG40-001-TG361B
systems
Micron 99.98% 99.00%
• Turbine Feed Gas Rating Efficiency Efficiency
COMMON LIQUID CONTAMINANTS 0.1 Micron 001 001A
• Compressor lubrication oils, water, hydrocarbon 0.3 Micron 003 003A
condensates, Amines
condensates Amines, Glycols,
Glycols Solvents,
Solvents Completion
*TG361 – Double Open Ended (DOE)
Fluids, Brine, and other liquid phase contaminates **TG363 – Single Open Ended (SOE) w/ ½” hole

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The
determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user
coalescer elements testing is performed internally and externally and is based on a modification of the ISO 12500 standards.

FILTRATION TECHNOLOGY CORPORATION

35
 CG60 SERIES
Liquid/Gas
Brochure Code CLG60-001-09-12

COST EFFECTIVE COALESCENCE

These elements have been specially engineered
to provide the most cost effective high
efficiency liquid coalescence of gas streams on
the market.
The introduction of proprietary interception,
coalescence, and drainage layers pleated in
conjunction with a high efficiency micro-fiber
media ensures high efficiency separation of
sub-micron liquid aerosols from gas streams
while minimizing fluid carry-over.
FEATURES AND BENEFITS
• Provides high efficiency removal of unwanted
liquid contaminants (available in both 99.98%
and 99.0% efficiency ratings)
• Multi-layer pleat pack design
• High Surface area provides low pressure drop
• Designed to upgrade existing vessels or to be
specified new installations.
• Standard version and amine compatible
version available
• Stainless Steel Hardware
• Viton® o-ring seal to insure positive seal ELEMENT DIMENSIONS
COMMON APPLICATIONS Outside Diameter: 6.00”
• Amine plant feed gas and treated gas Inside Diameter: 4.00”
• Suction and discharge of compressors Length: 40”
• Fuel Gas purification
• Protection of molecular sieve beds, alumina beds, COALESCER ELEMENT CODING
activated carbon beds, flare systems, and metering
systems CG60-001-SG402V
• Turbine feed gas Micron 99.98% 99.00%
Rating Efficiency Efficiency
COMMON LIQUID CONTAMINANTS
0.1 Micron 001 001A
• Compressor lubrication oils, water, hydrocarbon
condensates, Amines, Glycols, Solvents, Completion 0.3 Micron 003 003A
Fluids, Brine, and other liquid phase contaminates

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The
determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user
coalescer elements testing is performed internally and externally and is based on a modification of the ISO 12500 standards.

FILTRATION TECHNOLOGY CORPORATION

36
 Filtration Technology Corporation
5175 Ashley Court
Houston, TX 77041
713-849-0849 • 888-436-0849
FAX (713) 849-0202
www.ftc-houston.com

©Copyright 2013
Pall is a trademark of Pall Corporation.
All statements, information and recommendations contained herein are, to our knowledge, true and accurate. However, no guarantee or warranty is given, expressed or
implicated.