Made by: A.

Prapan COEFFICIENT
DESIGN RC. PIT
Ratio
PROJFCT NAME : SKT PHASE-I CONSTRUCTION ###
###

OUTLINE OF BASE SLAB OF PIT NO. V-010 ###

Short Dimension (Inside) , Lx = 15.00 m. ###
Long Dimension (Inside) , Ly = 22.00 m. ###
Height Dimension , Hp = 4.00 m. ###
Short Dimension (Base) , Lbx = 16.50 m. ###
Long Dimension (Base) , Lby = 23.50 m. ###
Slab Thickness , h = 400 mm. ###
Wall Thickness , t = 350 mm. ###
P = (Wp+Ws+Ww + Eo) / (Lbx.Lby)
Span Ratio = Ly/Lx = 1.47 ###
Height of soil from top of base, Hs = 2.00 m. Edge
Pup = Volumn of water which be instead of Pit
Height of G. water from TOB, Hw = 1.00 m.
DESIGN STRENGTH OF MATERIAL :
( Wp+Ws+Ee ) / Pup > 1.1 OK
Steel Strength, fy = 4,000 Ksc. ###
Concrete Strength, fc' = 210 Ksc. ###
= h - covering - ( short side bar )/2
Allowable Bearing Capacity = 12 Ton/m2. ###
SERVICE LOAD : = h - covering - short side bar - ( long side bar )/2
Unit Weight of Soil = 1.80 Ton/m3.
Coefficient Shear Factor of Soil f = 28 Pwb = Water pressure at bottom of base
Weight of RC.Pit, Wp = 625.6 Ton Wb = Weight of base
Af = Area of base
Weight of Soil above RC. Base, Ws = 112.9 Ton 1 ) Pu = ( 1.7 Pwb + 1.4( Wp - Wb + Ee) / Af )
2 ) Pu = ( 1.7 Pwb + 1.4( Wp - Wb - Ee) / Af ) ;
Weight of full water inside pit, Ww = 1320 Ton Case 2 for Equipment is supported by base
Equipment Operating Load , Eo = 0.0 Ton
Equipment Empty Load , Ee = 0.0 Ton
Total Contact Pressure, P = 5.3 T/m2. ( OK )
Water pressure uplift(Empty case), Pup = 511.5 kN
Check Buoyancy Ratio = 1.4 ( OK )
DESIGN REQUIREMENTS : CONSTANT
Cover to Reinforcement = 50 mm. b = 0.85 Mu = Cm.Pu.Lx2
Effective Depth in Short Side = 342 mm. k = b 6117 / ( 6117 + fy ) 0.51
Effective Depth in Long Side = 326 mm. m = fy / 0.85fc' 22.41
r = 0.75k / m 0.0172
R = rfy (1-rm / 2) 55.54 Vu = Cv.Pu.Lx

TWO WAY SLAB SHORT LONG

Pu = 3.29 Ton/m2 Edge Middle Edge Middle
Moment Coefficient Cm = 0.074 0.045 0.057 0.028
Shear Coefficient Cv = 0.513 0.460
Maximum Design Moment , Mu Ton-m 55.10 33.36 42.50 20.76
Maximum Design Shear , Vu Ton 25.37 22.73

a = d - ึ (d2 -2Mu / f 0.85fc'b) f = 0.9 cm. 12.21 6.73 9.50 4.24

As = Mu / (f fy ( d-a/2 )) f = 0.9 cm2 54.48 30.05 42.39 18.92
Provide Re-bar Diameter mm 16 16 16 16
Provide No. of Re-bar Nos. 6.6 6.6 6.6 4.0
Maximum As = r bd cm2 58.83 56.07
Minimum As = 14bd/fy or 4/3As (Less) cm2 11.97 11.97 11.41 11.41
Require As cm 2
54.48 30.05 42.39 18.92
Provide As cm2 13.27 13.27 13.27 8.04
As provide >As require NO NO NO NO
f Vc = 0.53f ึ f'c bd f = 0.85 Ton 22.33 21.28
DB DB DB DB
NO NO
BAR ARRANGEMENT PER METER DB16@151 DB16@151 DB16@151 DB16@250
 Made by: A.Prapan COEFFICIENT
DESIGN RC. PIT
Ratio
PROJFCT NAME : SKT PHASE-I CONSTRUCTION ###
###

OUTLINE OF RETAINING WALL OF PIT NO. V-010 ###

CAN'T USE THIS SHEET ###
Short Dimension , Lx = 15.00 m. ###
Long Dimension , Ly = 4.00 m. ###
Wall Thickness , h = 350 mm. ###
Span Ratio = Ly/Lx = 0.27 ###
DESIGN STRENGTH OF MATERIAL : ###
Steel Strength, fy = 4,000 Ksc. ###
Pu = 1.7 [ gsKsHs+gwHw(1-Ks)]
Concrete Strength, fcu = 210 Ksc. ###
LOADING : Edge
Ks = Tan2( 45 - f / 2 ) = 0.60
Total Earth and Water Pressure = 4.36 Ton/m2. & 6.80 Ton/m2.(Full Water Case )
DESIGN REQUIREMENTS : ###
Cover to Reinforcement = 50 mm. ###
Effective Depth in Short Side = 292 mm. ###
Effective Depth in Long Side = 276 mm.

Mu = Cm.Pu.Lx2 Vu = Cv.Pu.Lx

TWO WAY SLAB SHORT LONG

CONSTANT Edge Middle Base Middle
Moment Coefficient Cm = #N/A #N/A #N/A #N/A
Shear Coefficient Cv = #N/A #N/A
Maximum Design Moment , Mu Ton-m #N/A #N/A #N/A #N/A
Maximum Design Shear , Vu Ton #N/A #N/A

a = d - ึ (d2 -2Mu / f 0.85fc'b) f = 0.9 cm. #N/A #N/A #N/A #N/A

As = Mu / (f fy ( d-a/2 )) f = 0.9 cm2 #N/A #N/A #N/A #N/A
Provide Re-bar Diameter mm 16 16 16 16
Provide No. of Re-bar Nos. 5 5 5 5
Maximum As = r bd cm2 50.23 47.47
Minimum As = 14bd/fy or 4/3As (Less) cm2 #N/A #N/A #N/A #N/A
Require As cm2 #N/A #N/A #N/A #N/A
Provide As cm2 10.05 10.05 10.05 10.05
As provide >As require #N/A #N/A #N/A #N/A
f Vc = 0.53f ึ f'c bd f = 0.85 Ton 19.06 18.02
DB DB DB DB
#N/A #N/A
BAR ARRANGEMENT PER METER DB16@200 DB16@200 DB16@200 DB16@200
G16: Pu = 1.7 [ gsKsHs+gwHw(1-Ks)]

K28: Mu = Cm.Pu.Lx2

K29: Vu = Cv.Pu.Lx
 Made by: A.Prapan COEFFICIENT
DESIGN RC. PIT
Ratio
PROJFCT NAME : SKT PHASE-I CONSTRUCTION ###
###

OUTLINE OF RETAINING WALL OF PIT NO. V-010 ###

CAN'T USE THIS SHEET ###
Short Dimension , Lx = 22.00 m. ###
Long Dimension , Ly = 4.00 m. ###
Slab Thickness , h = 350 mm. ###
Span Ratio = Ly/Lx = 0.18 ###
DESIGN STRENGTH OF MATERIAL : ###
Steel Strength, fy = 4,000 Ksc. ###
Concrete Strength, fcu = 210 Ksc. ###
LOADING : Edge
Ks = Tan2( 45 - f / 2 ) = 0.60
Total Earth and Water Pressure = 4.36 Ton/m2. & 6.80 Ton/m2.(Full Water Case )
DESIGN REQUIREMENTS : ###
Cover to Reinforcement = 50 mm. ###
Effective Depth in Short Side = 292 mm. ###
Effective Depth in Long Side = 276 mm.

TWO WAY SLAB SHORT LONG

CONSTANT Edge Middle Base Middle
Moment Coefficient Cm = #N/A #N/A #N/A #N/A
Shear Coefficient Cv = #N/A #N/A
Maximum Design Moment , Mu Ton-m #N/A #N/A #N/A #N/A
Maximum Design Shear , Vu Ton #N/A #N/A

a = d - ึ (d2 -2Mu / f 0.85fc'b) f = 0.9 cm. #N/A #N/A #N/A #N/A

As = Mu / (f fy ( d-a/2 )) f = 0.9 cm2 #N/A #N/A #N/A #N/A
Provide Re-bar Diameter mm 16 16 16 16
Provide No. of Re-bar Nos. 5 5 5 5
Maximum As = r bd cm2 50.23 47.47
Minimum As = 14bd/fy or 4/3As (Less) cm2 #N/A #N/A #N/A #N/A
Require As cm2 #N/A #N/A #N/A #N/A
Provide As cm2 10.05 10.05 10.05 10.05
As provide >As require #N/A #N/A #N/A #N/A
f Vc = 0.53f ึ f'c bd f = 0.85 Ton 19.06 18.02
DB DB DB DB
#N/A #N/A
BAR ARRANGEMENT PER METER DB16@200 DB16@200 DB16@200 DB16@200
 Made by: A.Prapan COEFFICIENT
DESIGN RC. PIT
Ratio
PROJFCT NAME : SKT PHASE-I CONSTRUCTION ###
###

OUTLINE OF RETAINING WALL OF PIT NO. V-010 ###

###
Short Dimension , Lx = 4.00 m. ###
Long Dimension , Ly = 22.00 m. ###
Slab Thickness , h = 350 mm. ###
Span Ratio = Ly/Lx = 5.50 ###
DESIGN STRENGTH OF MATERIAL : ###
Steel Strength, fy = 4,000 Ksc. ###
Concrete Strength, fc' = 210 Ksc. ###
LOADING : Base
Ks = Tan2( 45 - f / 2 ) = 0.60 ###
Total Earth and Water Pressure = 4.36 Ton/m2. & 6.80 Ton/m2.(Full Water Case )
DESIGN REQUIREMENTS : ###
Cover to Reinforcement = 50 mm. ###
Effective Depth in Short Side = 292 mm. ###
Effective Depth in Long Side = 276 mm.

ONE WAY SLAB SHORT LONG

CONSTANT Base Middle Edge Middle
Moment Coefficient Cm = 0.142 0.007 0.107 0.018
Shear Coefficient Cv = 0.520 0.260
Maximum Design Moment , Mu Ton-m 15.45 0.76 11.64 1.96
Maximum Design Shear , Vu Ton 14.14 7.07

a = d - ึ (d2 -2Mu / f 0.85fc'b) f = 0.9 cm. 3.50 0.16 2.76 0.45

As = Mu / (f fy ( d-a/2 )) f = 0.9 cm2 15.64 0.73 12.33 1.99
Provide Re-bar Diameter mm 16 16 16 16
Provide No. of Re-bar Nos. 8.0 4.0 6.6 4.0
Maximum As = r bd cm2 50.23 47.47
Minimum As = 14bd/fy or 4/3As (Less) cm2 10.22 0.97 9.66 2.65
Require As cm2 15.64 0.97 12.33 2.65
Provide As cm2 16.08 8.04 13.27 8.04
As provide >As require OK OK OK OK
f Vc = 0.53f ึ f'c bd f = 0.85 Ton 19.06 18.02
DB DB DB DB
OK OK
BAR ARRANGEMENT PER METER DB16@125 DB16@250 DB16@151 DB16@250
 Made by: A.Prapan COEFFICIENT
DESIGN RC. PIT
Ratio
PROJFCT NAME : SKT PHASE-I CONSTRUCTION ###
###

OUTLINE OF RETAINING WALL OF PIT NO. V-010 ###

###
Short Dimension , Lx = 4.00 m. ###
Long Dimension , Ly = 15.00 m. ###
Slab Thickness , h = 350 mm. ###
Span Ratio = Ly/Lx = 3.75 ###
DESIGN STRENGTH OF MATERIAL : ###
Steel Strength, fy = 4,000 Ksc. ###
Concrete Strength, fcu = 210 Ksc. ###
LOADING : Base
Ks = Tan2( 45 - f / 2 ) = 0.60 ###
Total Earth and Water Pressure = 4.36 Ton/m2. & 6.80 Ton/m2.(Full Water Case )
DESIGN REQUIREMENTS : ###
Cover to Reinforcement = 50 mm. ###
Effective Depth in Short Side = 292 mm. ###
Effective Depth in Long Side = 276 mm.

ONE WAY SLAB SHORT LONG

CONSTANT Base Middle Edge Middle
Moment Coefficient Cm = 0.139 0.008 0.105 0.019
Shear Coefficient Cv = 0.520 0.260
Maximum Design Moment , Mu Ton-m 15.07 0.82 11.42 2.07
Maximum Design Shear , Vu Ton 14.14 7.07

a = d - ึ (d2 -2Mu / f 0.85fc'b) f = 0.9 cm. 3.41 0.17 2.71 0.47

As = Mu / (f fy ( d-a/2 )) f = 0.9 cm2 15.22 0.78 12.09 2.10
Provide Re-bar Diameter mm 16 16 16 16
Provide No. of Re-bar Nos. 8.0 4.0 6.6 4.0
Maximum As = r bd cm2 50.23 47.47
Minimum As = 14bd/fy or 4/3As (Less) cm2 10.22 1.04 9.66 2.80
Require As cm2 15.22 1.04 12.09 2.80
Provide As cm2 16.08 8.04 13.27 8.04
As provide >As require OK OK OK OK
f Vc = 0.53f ึ f'c bd f = 0.85 Ton 19.06 18.02
DB DB DB DB
OK OK
BAR ARRANGEMENT PER METER DB16@125 DB16@250 DB16@151 DB16@250