Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 5 views

    M Trfull 0029

    Uploaded by

    foreman pemuda
    fhtzhijdzhonxduvj

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    M Trfull 0029

    Uploaded by

    foreman pemuda
    5 views3 pages
    fhtzhijdzhonxduvj

    Original Title

    m_trfull_0029

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    fhtzhijdzhonxduvj

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    5 views3 pages

    M Trfull 0029

    Uploaded by

    foreman pemuda
    fhtzhijdzhonxduvj

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    TR−29

    TRANSFER (Full−Time 4WD Type) − CENTER DIFFERENTIAL


    TR043−02

    DISASSEMBLY
    1. INSPECT HIGH SPEED OUTPUT GEAR RADIAL AND
    THRUST CLEARANCE
    (a) Using a feeler gauge, measure the high speed output
    gear thrust clearance.
    Standard clearance:
    0.10 − 0.25 mm (0.0039 − 0.0098 in.)
    Maximum clearance:
    TF0900
    0.25 mm (0.0098 in.)

    (b) Using a dial indicator, measure the high speed output


    gear radial clearance.
    Standard clearance:
    0.035 − 0.091 mm (0.0014 − 0.0036 in.)
    Maximum clearance:
    0.091 mm (0.0036 in.)

    TF0944

    2. REMOVE FRONT DRIVE GEAR PIECE


    SST (a) Using a snap ring expander, remove the snap ring.
    (b) Using SST and a press, remove the front drive gear piece.
    SST 09950−00020, 09950−60010 (09951−00320)
    NOTICE:
    Be careful not to drop the center differential assembly.

    Q07101

    3. REMOVE FRONT TAPER ROLLER BEARING


    Using SST and a press, remove the front taper roller bearing.
    SST SST 09950−00020
    NOTICE:
    Set the claw of SST to the bearing inner race securely.

    Q07102

    4. REMOVE HIGH SPEED OUTPUT GEAR


    5. REMOVE NEEDLE ROLLER BEARING

    D02679

    LAND CRUISER (W/G) (RM616E)


    TR−30
    TRANSFER (Full−Time 4WD Type) − CENTER DIFFERENTIAL

    6. REMOVE HIGH AND LOW CLUTCH SLEEVE

    D02680

    7. REMOVE HIGH SPEED OUTPUT GEAR BUSHING


    AND CLUTCH HUB
    (a) Using SST, remove the high speed output gear bushing
    and clutch hub.
    SST SST 09950−00020, 09950−00030, 09950−60010
    (09951−00320)
    (b) Using a magnetic finger, remove the straight pin from the
    differential front case.
    Q07103

    8. REMOVE REAR TAPER ROLLER BEARING


    Using SST and a press, remove the rear taper roller bearing.
    SST
    SST 09950−00020, 09950−60010 (09951−00320)
    NOTICE:
    Set the claw of SST to the bearing inner race securely.

    Q07113

    9. REMOVE DIFFERENTIAL REAR CASE


    Remove the 12 bolts and differential rear case.

    D02681

    10. REMOVE REAR SIDE GEAR AND THRUST WASHER

    D02682

    LAND CRUISER (W/G) (RM616E)


    TR−31
    TRANSFER (Full−Time 4WD Type) − CENTER DIFFERENTIAL

    11. REMOVE PINION SHAFT, PINION GEAR AND THRUST


    WASHER
    (a) Remove the straight pin from the pinion shaft.

    D02683

    (b) Remove the pinion shaft, 2 pinion gears and thrust wash-
    ers.

    D02684

    (c) Remove the front side gear and thrust washer.

    D02685

    12. REMOVE LOW GEAR


    Using a plastic hammer, tap and remove the low gear.
    NOTICE:
    Be careful not to damage the low gear.

    D02686

    LAND CRUISER (W/G) (RM616E)

    You might also like