DATA SHEET

www.onsemi.com

1.5 Watt Plastic

Surface Mount
Zener Voltage Regulators
SMA
1SMA59xxBT3G Series, CASE 403D

SZ1SMA59xxBT3G Series STYLE 1

This complete new line of 1.5 Watt Zener Diodes offers the
following advantages.
CATHODE ANODE
Features
• Standard Zener Breakdown Voltage Range − 3.3 V to 68 V MARKING DIAGRAM
• ESD Rating of Class 3 (> 16 kV) per Human Body Model
• Flat Handling Surface for Accurate Placement
• Package Design for Top Slide or Bottom Circuit Board Mounting 8xxB
• Low Profile Package AYWWG
• Ideal Replacement for MELF Packages
• AEC−Q101 Qualified and PPAP Capable − SZ1SMA59xxBT3G
• SZ Prefix for Automotive and Other Applications Requiring Unique 8xxB = Device Code (Refer to page 2)
A = Assembly Location
Site and Control Change Requirements
Y = Year
• These are Pb−Free Devices* WW = Work Week
G = Pb−Free Package
Mechanical Characteristics:
CASE: Void-free, transfer-molded plastic ORDERING INFORMATION
FINISH: All external surfaces are corrosion resistant with readily
solderable leads Device Package Shipping†
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 1SMA59xxBT3G SMA 5,000 /
260°C for 10 seconds (Pb−Free) Tape & Reel
POLARITY: Cathode indicated by molded polarity notch or cathode SZ1SMA59xxBT3G SMA 5,000 /
band (Pb−Free) Tape & Reel
FLAMMABILITY RATING: UL 94 V−0 @ 0.125 in †For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
MAXIMUM RATINGS Brochure, BRD8011/D.
Rating Symbol Value Unit
DC Power Dissipation @ TL = 75°C, PD
DEVICE MARKING INFORMATION
Measured Zero Lead Length (Note 1) 1.5 W See specific marking information in the device marking
Derate above 75°C 20 mW/°C column of the Electrical Characteristics table on page 2 of
Thermal Resistance, Junction−to−Lead RqJL 50 °C/W this data sheet.

DC Power Dissipation @ TA = 25°C (Note 2) PD 0.5 W

Derate above 25°C 4.0 mW/°C
Thermal Resistance, Junction−to−Ambient RqJA 250 °C/W
Operating and Storage Temperature Range TJ, Tstg −65 to °C
+150
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. 1 in square copper pad, FR−4 board.
2. FR−4 Board, using onsemi minimum recommended footprint.

*For additional information on our Pb−Free strategy and soldering details, please
download the onsemi Soldering and Mounting Techniques Reference Manual,
SOLDERRM/D.

© Semiconductor Components Industries, LLC, 2016 1 Publication Order Number:

August, 2021 − Rev. 11 1SMA5913BT3/D
 1SMA59xxBT3G Series, SZ1SMA59xxBT3G Series

ELECTRICAL CHARACTERISTICS (TA = 25°C unless

otherwise noted, VF = 1.2 V Max. @ IF = 200 mA for all types)
I
Symbol Parameter
IF
VZ Reverse Zener Voltage @ IZT
IZT Reverse Current
ZZT Maximum Zener Impedance @ IZT
IZK Reverse Current VZ VR
V
IR VF
ZZK Maximum Zener Impedance @ IZK IZT
IR Reverse Leakage Current @ VR
VR Reverse Voltage
IF Forward Current
VF Forward Voltage @ IF
IZM Maximum DC Zener Current Zener Voltage Regulator

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 1.2 V Max. @ IF = 200 mA for all types)
Zener Voltage (Note 4) Zener Impedance Leakage Current
VZ (Volts) @ IZT ZZT @ IZT ZZK @ IZK IR @ VR IZM
Device
Device* (Note 3) Marking Min Nom Max mA W W mA mA Volts mA(dc)
1SMA5913BT3G 813B 3.13 3.3 3.47 113.6 10 500 1.0 50 1.0 455
1SMA5914BT3G 814B 3.42 3.6 3.78 104.2 9.0 500 1.0 35.5 1.0 417
1SMA5915BT3G 815B 3.70 3.9 4.10 96.1 7.5 500 1.0 12.5 1.0 385
1SMA5916BT3G 816B 4.08 4.3 4.52 87.2 6.0 500 1.0 2.5 1.0 349
1SMA5917BT3G 817B 4.46 4.7 4.94 79.8 5.0 500 1.0 2.5 1.5 319
1SMA5918BT3G 818B 4.84 5.1 5.36 73.5 4.0 350 1.0 2.5 2.0 294
1SMA5919BT3G 819B 5.32 5.6 5.88 66.9 2.0 250 1.0 2.5 3.0 268
1SMA5920BT3G 820B 5.89 6.2 6.51 60.5 2.0 200 1.0 2.5 4.0 242
1SMA5921BT3G 821B 6.46 6.8 7.14 55.1 2.5 200 1.0 2.5 5.2 221
1SMA5922BT3G 822B 7.12 7.5 7.88 50 3.0 400 0.5 2.5 6.0 200
1SMA5923BT3G 823B 7.79 8.2 8.61 45.7 3.5 400 0.5 2.5 6.5 183
1SMA5924BT3G 824B 8.64 9.1 9.56 41.2 4.0 500 0.5 2.5 7.0 165
1SMA5925BT3G 825B 9.5 10 10.5 37.5 4.5 500 0.25 2.5 8.0 150
1SMA5926BT3G 826B 10.45 11 11.55 34.1 5.5 550 0.25 0.5 8.4 136
1SMA5927BT3G 827B 11.4 12 12.6 31.2 6.5 550 0.25 0.5 9.1 125
1SMA5928BT3G 828B 12.35 13 13.65 28.8 7.0 550 0.25 0.5 9.9 115
1SMA5929BT3G 829B 14.25 15 15.75 25 9.0 600 0.25 0.5 11.4 100
1SMA5930BT3G 830B 15.2 16 16.8 23.4 10 600 0.25 0.5 12.2 94
1SMA5931BT3G 831B 17.1 18 18.9 20.8 12 650 0.25 0.5 13.7 83
1SMA5932BT3G 832B 19 20 21 18.7 14 650 0.25 0.5 15.2 75
1SMA5933BT3G 833B 20.9 22 23.1 17 17.5 650 0.25 0.5 16.7 68
1SMA5934BT3G 834B 22.8 24 25.2 15.6 19 700 0.25 0.5 18.2 63
1SMA5935BT3G 835B 25.65 27 28.35 13.9 23 700 0.25 0.5 20.6 56
1SMA5936BT3G 836B 28.5 30 31.5 12.5 26 750 0.25 0.5 22.8 50
1SMA5937BT3G 837B 31.35 33 34.65 11.4 33 800 0.25 0.5 25.1 45
1SMA5938BT3G 838B 34.2 36 37.8 10.4 38 850 0.25 0.5 27.4 42
1SMA5939BT3G 839B 37.05 39 40.95 9.6 45 900 0.25 0.5 29.7 38
1SMA5940BT3G 840B 40.85 43 45.15 8.7 53 950 0.25 0.5 32.7 35
1SMA5941BT3G 841B 44.65 47 49.35 8.0 67 1000 0.25 0.5 35.8 32
1SMA5942BT3G 842B 48.45 51 53.55 7.3 70 1100 0.25 0.5 38.8 29
1SMA5943BT3G 843B 53.2 56 58.8 6.7 86 1300 0.25 0.5 42.6 27
1SMA5945BT3G 845B 64.6 68 71.4 5.5 120 1700 0.25 0.5 51.7 22
3. Tolerance and Voltage Regulation Designation − The type number listed indicates a tolerance of ±5%.
4. VZ limits are to be guaranteed at thermal equilibrium.
* Include SZ-prefix devices where applicable.

www.onsemi.com
2
 1SMA59xxBT3G Series, SZ1SMA59xxBT3G Series

RATING AND TYPICAL CHARACTERISTIC CURVES (TA = 25°C)

4 100
PD , MAXIMUM POWER DISSIPATION (WATTS)

3.2

IZ, ZENER CURRENT (mA)

10
2.4
TL
1.6
1

0.8
TA

0 0.1
0 25 50 75 100 125 150 0 2 4 6 8 10
T, TEMPERATURE (°C) VZ, ZENER VOLTAGE (VOLTS)

Figure 1. Steady State Power Derating Figure 2. VZ − 3.3 thru 10 Volts

100 θVZ , TEMPERATURE COEFFICIENT (mV/ °C) 10

8 VZ @ IZT
IZ, ZENER CURRENT (mA)

6
10
4

2
1
0

-2

0.1 -4
0 10 20 30 40 50 60 70 80 2 4 6 8 10 12
VZ, ZENER VOLTAGE (VOLTS) VZ, ZENER VOLTAGE (VOLTS)

Figure 3. VZ = 12 thru 68 Volts Figure 4. Zener Voltage − 3.3 to 12 Volts

100
θVZ , TEMPERATURE COEFFICIENT (mV/ °C)

ZZ, DYNAMIC IMPEDANCE (OHMS)

70 VZ @ IZT 100
IZ(dc) = 1 mA
50

30

10 10 mA
20

IZ(rms) = 0.1 IZ(dc)

20 mA
10
10 20 30 50 70 100 10 100
VZ, ZENER VOLTAGE (VOLTS) VZ, ZENER VOLTAGE (VOLTS)

Figure 5. Zener Voltage − 12 to 68 Volts Figure 6. Effect of Zener Voltage

www.onsemi.com
3
 1SMA59xxBT3G Series, SZ1SMA59xxBT3G Series

RATING AND TYPICAL CHARACTERISTIC CURVES (TA = 25°C)

1000 10

NONREPETITIVE, EXPONENTIAL
MEASURED @ PULSE WAVEFORM, TJ = 25°C

Ppk , PEAK POWER (kW)

ZERO BIAS
C, CAPACITANCE (pF)

1
MEASURED @
100 VZ/2

0.1

TJ = 25°C
10 0.01
10 100 0.01 0.1 1 10
BREAKDOWN VOLTAGE (VOLTS) TP, PULSE WIDTH (ms)

Figure 7. Capacitance Curve Figure 8. Typical Pulse Rating Curve

120 120
TA = 25°C
≤ 10 ms 8/20 ms WAVEFORM
PW (ID) IS DEFINED AS THE
Ippm, PEAK PULSE CURRENT (%)

100 100 AS DEFINED BY ANSI C62.1

POINT WHERE THE PEAK CURRENT
PEAK VALUE 0.9 IPEAK AND IEC 801-5.
DECAYS TO 50% OF Ipp.
Ippm, PEAK PULSE

80 Ippm 80
CURRENT (%)

60 HALF VALUE - Ipp/2 60

0.5 IPEAK

40 40
10/1000 ms WAVEFORM
AS DEFINED BY R.E.A.
20 20
td
0.1 IPEAK T = 8 ms
0 0
0 1 2 3 4 5 0 0.02 0.04 0.06 0.08 0.1
t, TIME (ms) T t, TIME (ms)
20 ms
Figure 9. Pulse Waveform Figure 10. Pulse Waveform

www.onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS

SMA
CASE 403D
ISSUE J
STYLE 1 STYLE 2
DATE 22 OCT 2021
SCALE 1:1

STYLE 1: STYLE 2:
PIN 1. CATHODE (POLARITY BAND) NO POLARITY
2. ANODE

GENERIC
MARKING DIAGRAM*

xxxx xxxx
AYWWG AYWWG

STYLE 1 STYLE 2
xxxx = Specific Device Code
A = Assembly Location
Y = Year
WW = Work Week
G = Pb−Free Package

*This information is generic. Please refer to

device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.

Electronic versions are uncontrolled except when accessed directly from the Document Repository.
DOCUMENT NUMBER: 98AON04079D Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

DESCRIPTION: SMA PAGE 1 OF 1

onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.

© Semiconductor Components Industries, LLC, 2019 www.onsemi.com

 onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS: ONLINE SUPPORT: www.onsemi.com/support
Technical Library: www.onsemi.com/design/resources/technical−documentation For additional information, please contact your local Sales Representative at
onsemi Website: www.onsemi.com www.onsemi.com/support/sales


Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

onsemi:
1SMA5913BT3G 1SMA5914BT3 1SMA5914BT3G 1SMA5915BT3 1SMA5915BT3G 1SMA5916BT3
1SMA5916BT3G 1SMA5917BT3 1SMA5917BT3G 1SMA5918BT3 1SMA5918BT3G 1SMA5919BT3
1SMA5919BT3G 1SMA5920BT3 1SMA5920BT3G 1SMA5921BT3 1SMA5921BT3G 1SMA5922BT3
1SMA5922BT3G 1SMA5923BT3 1SMA5923BT3G 1SMA5924BT3 1SMA5924BT3G 1SMA5925BT3
1SMA5925BT3G 1SMA5926BT3 1SMA5926BT3G 1SMA5927BT3 1SMA5927BT3G 1SMA5928BT3
1SMA5928BT3G 1SMA5929BT3 1SMA5929BT3G 1SMA5930BT3 1SMA5930BT3G 1SMA5931BT3
1SMA5931BT3G 1SMA5932BT3 1SMA5932BT3G 1SMA5933BT3 1SMA5933BT3G 1SMA5934BT3
1SMA5934BT3G 1SMA5935BT3 1SMA5935BT3G 1SMA5936BT3 1SMA5936BT3G 1SMA5937BT3
1SMA5937BT3G 1SMA5938BT3 1SMA5938BT3G 1SMA5939BT3 1SMA5939BT3G 1SMA5940BT3
1SMA5940BT3G 1SMA5941BT3 1SMA5941BT3G 1SMA5942BT3 1SMA5942BT3G 1SMA5943BT3
1SMA5943BT3G 1SMA5944BT3 1SMA5944BT3G 1SMA5945BT3 1SMA5945BT3G SZ1SMA5925BT3G
SZ1SMA5915BT3G SZ1SMA5917BT3G SZ1SMA5918BT3G SZ1SMA5920BT3G SZ1SMA5928BT3G
SZ1SMA5934BT3G SZ1SMA5936BT3G SZ1SMA5945BT3G 1SMA5913BT3 SZ1SMA5929BT3G
SZ1SMA5927BT3G SZ1SMA5938BT3G SZ1SMA5940BT3G SZ1SMA5933BT3G SZ1SMA5931BT3G
SZ1SMA5939BT3G SZ1SMA5922BT3G SZ1SMA5937BT3G SZ1SMA5926BT3G SZ1SMA5921BT3G
SZ1SMA5924BT3G SZ1SMA5935BT3G SZ1SMA5923BT3G SZ1SMA5932BT3G SZ1SMA5919BT3G
SZ1SMA5916BT3G SZ1SMA5913BT3G SZ1SMA5930BT3G SZ1SMA5942BT3G SZ1SMA5941BT3G
SZ1SMA5943BT3G SZ1SMA5935BT3G-VF01 SZ1SMA5914BT3G