Summer Internship (3180601)

A Summer Internship Report

“CONSTRUCTION OF MULTI STOREYED HOSPITAL BUILDING”

At the industry or company
S.S Constructions

Report Submitted By
MANJEET KUMAR-200570106009
In partial fulfillment for the award of the degree of

Bachelor of Engineering
In

Civil Engineering

Marwadi Education Foundation, Rajkot

Gujarat Technological University,Ahmedabad
2024-2025

1
 Marwadi Education
Foundation Faculty of Engineering
DEPARTMENT OF CIVIL ENGINEERING
2023-24

CERTIFICATE

Date

TO WHOM IT MAY CONCERN

This is to certify that the Internship at S.S Constructions /Industry has been
satisfactorily completed by Name Manjeet Kumar (200570106009) under my
guidance in the fulfillment of the course Summer Internship (3180601)work
during the academic year 2024- 2025.

Internal Guide Head of the Department Prof

Prof Hussain Rangwala Dr Ankur Bhogayata

2
 Acknowledgement

I wish to express our sincere gratitude to my Supervisor Mr. ER Ramesh kushwaha continuously
guiding me at the constructions site and answering all my doubts with patience .I would also like to
thank my Internal Guide Prof. Hussain Rangwala.

For helping us through our internship by giving us the necessary suggestions and advices along with
their valuable co-ordination in completing this internship.

We also thank our parents, friends and all the members of the family for the precious support and
encouragement which they had provided incompletion of our work.In addition to that, we would also
like to mention the company personals who gave us the permission to use and experience the valuable
resources required for the internship.

Thus, In conclusion to the above said, we once again thank the staff members of S.S Constructions or
their valuable support in completion of the internship.

Thank You

Name– Manjeet Kumar

3
 Contents

Completion Certificate… ..................................................................................................... 3

Acknowledgement……………………………………………………………………………4

Chapter1:Introduction… ....................................................................................................... 7

Introduction of company……………………………………………………………………………………... 7
Aim and objective of the internship:…………………………………………………………………………. 7
Site Overview:………………………………………………………………………………………………... .8

Chapter2:Roleand Responsibilities…………………………………………………………..9

General…………………………………………………………………………………………………………. 9
Daily Task sand Activities……………………………………………………………………………………... 9
Leveling work………………………………………………………………………………………………….. 10
Pcc……………………………………………………………………………………………………………..11
Reinforcement…………………………………………………………………………………………………12
Bss for column………………………………………………………………………………………………...15
Casting work……………………………………..............................................................................................16
Settle yard……………………………………………………………………………………………………..18
Soil and filling…………………………………………………………………………………………………19
Curing………………………………………………………………………………………………………….20

Chapter3:Skill Learning…………..……………………………………………………….21

Chapter4:Overall Experience…………………………………………………………….. 23

Chapter5:Annexures………………………………………………………………...…………………..24
Annexures-1……………………………………………………………………………………..24
Annexures-2……………………………………………………………………………………....25
Annexures-3………………………………………………………………………………………26
Annexures-4 ……………………………………………………………………………………27
Annextures-5………………………………………………………………………………………28

4
 LIST OF FIGURES

FIG.1(a),(b) 3D View Of Project .................................................................................................... 8

FIG.2(a),(b) Leveling work ............................................................................................................. 10

FIG.3(a),(b) Pcc for footing ............................................................................................................ 11

FIG.4(a),(b) Footing and column framework .................................................................................. 12

FIG.5(a),(b) Footing and combined footing schedule ...................................................................... 13

FIG.6(a)Column schedule ............................................................................................................... 14

FIG.7(a)(b) Casting of footing ......................................................................................................... 16

FIG.8(a),(b) casting of column ......................................................................................................... 17

FIG.9(a),(b) Steel yard…………………………………………………………………………………...18

FIG .10(a),(b) Soil filling………………………………………………………………………………..19

FIG.11(a),(b) Curing……………………………………………………………………………………20

5
 Chapter1:Introduction

1.1Introduction of company

 Name: S.S Constructions.

 Owner Name: Sabha singh.

 Location:301 Avadh Complex , D-5 near Sal Baba Mandir , Laxmi nagar ,Delhi-110092.

 S.S construction provide services like supply of building construction materials,Trading of any
materials and civil contractors .
 S.S constructions is majorly running constructions of all types of buildings projects and one of them
Project is seltool of medical research and technology(SMRT) Kanpur.Uttar Pradesh.

1.2 Aim and Objective of the internship:

 An internship is a purposeful activity of the student set in a work environment in order to obtain

learning outcomes within their curriculum.

 The aim of internship is providing direction to the activities,help to focus on result,and to assess

the result achieved.

 To gain practical knowledge and techniques from the site.

 Skill development which is required in further jobs.

 Labour and material management on site for faster work completion.

 To have knowledge about the role and responsibility as an engineer on site.

 An ability to use the techniques ,skills and modern engineering tool necessary for enginnering

practice.

6
 1.3 Site Overview:

 School of medical Research and Technology (SMRT) is institutional building and has
G+6 currently footing and column work is going. Many activity were working in this
project like shuttering work , fotting and column casting ,Reinforcement work ,soil filing
etc.

Figure-1(a)

Figure-1(b)

7
 Chapter2: Roles and Responsibilities

 2.1 General

• Check proper ratio for M40 grade during the casting of footing and column.

• Check the form work of column and footing.

• Check the placement of Reniforcement in column and footing.

• Check soil filling.

• Leveling of footing and column.

• Check BBS in steel yard.

• Material management and availability during casting of structures.

 2.2 Daily Tasks And Activities:

• Leveling.

• PCC work in foundation.

• Formwork of footing and column.

• Reniforecement work of footing and column.

• Casting of footing and column.

• Layering of footing and column.

• Management of labours.

8
  2.3 Leveling work
 Leveling done for the PCC according to drawing leveling also done for the column marking,and footing marking.
 All the leveling done by dumpy level.

Figure-2(a) – Pcc level marking

Figure-2(b) – Pcc level marking

9
 2.4 Portland Pozzoland Cement

 The Pcc layer improve the bonding between the soil layer and Rcc.
 In Pcc first layer stone and white sand are use and proper compaction is done.
 After first layer , for Pcc M-15 concrete mix are use.

Figure-3(a) – Pcc for footing

Figure-3(b) - compaction

10
2.5 Formwork

 Formwork is the process of giving support and stability to concrete before it becomes solid.
 For all types of formwork aluminum plate are using.

Figure-4(a) – Farmwork for column

Figure-4(b) – Farmwork for footing

11
2.6 Reinforcement details

 Reinforcement detail of footing.

• Clear cover to outcomes reinforcement shall be as follow.

 Foundation / piles 50mm

 Column ,walls 40mm
 Beam 25mm
 Slab, chajjas 25mm

Figure-5(a) – Footing Schedule

12 Figure-5(b) –Combined footing schedule

  Reinforcement details for column.
• Column schedule

Figure-6(a) – Column schedule

13
  BSS for Column.

Column no Length (l) Width Spacing Dia of bars No of bars Cutting Rings
length
Ac-73 550 550 100 32 16 7813 37
Ac-8 650 650 100 25 20 7435 43
Cc-40 500 1100 100 32 28 5058 86
Ac-69 550 550 100 32 16 7813 37
Ac-65 550 550 100 32 16 7813 37
Ac-66 550 550 100 32 16 6615 74
Ac-67 550 550 100 32 16 7815 74
Ac-68 550 550 100 32 16 7813 74
Ac-74 650 650 100 25 20 7525 37

14
2.7 Casting work
 Casting of footing
• Concrete mix use for all the footing is M-40.
• All the concrete work is done by use of mixer machine.
• The height of placing concrete is 1.5m.
• Needle vibrator are use for compaction of concrete.

Figure-7(a) – Casting of footing

Figure-7(b) – Casting of footing

15
 Casting of column
• Concrete mix use for all the column is M-40.
• All the concrete works is done by use of mixer machine.
• The height of placing concrete is 1.5m.
• Needle vibrator are use for compaction of concrete.

Figure-8(a) – Casting of column

Figure-8(b) – Casting of column

16
 2.8 steel yard.
• Loading and unloading of bars from the tailor truck.
• Verification of cutting and bonding of bars according to drawing.
• In steel yard all types of bars are stored 80,100,120,160,200,250,320 etc ,and also cutting and banding is done
14 steel yard.

Figure-9(a) – Bar bending machine

Figure-9(b) – Steel yard

17
2.9 Soil & Filling.

• Soil filling done upto footing height.

• Soil filling done into layer wise ,each layer is 0.305m height.
• After each layer compaction is done.

Figure-10(a) – Soil filling

Figure-10(b) – Compaction of soil

18
2.10 Curing

Figure-11(a) – Curing of column

Figure-11(b) – Curing of footing

19
 Chapter 3: Skills Learned
• ABOUT THE SKILLS:

Skill is a term that encompasses the knowledge, competencies and abilities to perform operational
tasks. Skills are developed through life and work experiences and they can also be learned through
study.

• Skills Learned from internship.

1. Communication

2. Data Collection

3. Site Inspection

4. Problem Solving

5. Construction Activities

• HOW DO I LEARNT THE SKILLS?

1.Communication:
• Gained communication skills by preparing an everyday report on the tasks performed.

• Maintained effective communication between the superior and field crew.

• Involved in the construction stage of the project, site meetings and communication with clients

2.Data Collection:

• Provided technical assistance to senior engineers with data collection and analysis.

• Field work included site visits for data collection.

• Field data collection and measurements.

3.Site Inspection:

• Provided on-site inspection services including column, beam and slab, reinforcing steel, and
Concrete testing.

Checked project progress by site inspection and prepared daily report indicating material and
Labour required for work.

20
4.Problem Solving:

• Analysing Contribution Factors

• Implementation of a plan

• Generated Intervention

• Assessing the Solution's Effectiveness

• Implementation of BBS

5.Construction Activities:

• Provided day-to-day management, technical direction, supervision and coordination of

construction activities.

• Supervised construction activities, followed up design delivery and material procurement.

• Conducted field inspections and monitored construction activities.

21
 CHAPTER4: OVERALL EXPERIENCE

• Technical Experince:

• Learnt many technical skills ,techniques during internship project at construction site.

• Experienced actual site work is different from book knowledge and different methods are used
on construction site.

• Learnt about footing and column construction which is constructed at site

• Concrete grade used one site M15, M40 grade and got the knowledge about other grades of concrete.

• Book knowledge and leaned skill was very helpful during the technical experience on site.

• Personal Experince :

• Very thankful to the S.S CONSTRUCTIONS for small Contribution of me in GSMST ,

Kanpur project .Thank you for giving me the best guidance as a technical personanl
guidance about the how to make better personal skills, communication , how to interact with
different people on site.

• At the site mason and workers was very nice and gave me the detailed knowledge of work and
gave me best tips regarding work and management.

• Learned about how to manage and interact with many workers doing different type of work
on Site.

• Know about what is the responsibilities of engineer and how to manage whole construction
site and deal with problems on site during work.

22
 CONCLUSION

Overall summer internship is a really good program .It helps to enhance and develop my skills , abilities,

and knowledge. It was a good experience and memories as not only I have gained experience, but also

new friends and knowledge. The treatment by company was just, equitable and professional. I’ve learned
from different units and peoples. I am grateful and thankful to my guide, Mr. ER Hardik patel and Prof

Hussain Rangwala .They help me to handle some of my weakness and provided guidance to me whenever I

am in need. I think the summer internship of 14 days was enough to gain the experience and knowledge on
site. This summer internship helps us to identify our strength, abilities, weakness and more.

23
 ANNEXURES
ANNEXURE-1

Bird’s Eye View

24
 ANNEXURE-2
Main Entrance

25
 ANNEXURE-3
Academic View

26
 ANNEXURE-4
Typical plan showing shuttering arrangement for column

27
 ANNEXURE-5

Typical plan showing shuttering arrangement for column

28
29