Product Specifications

DHHTT65B
DHHTT65B--3XR
10-port sector antenna, 2x 790–960, 4x 1710–2180 and 4x 2490-2690 MHz, 65°
HPBW, 3x RET with individual tilt available for the 850 MHz band, 1900 MHz bands and
2500 MHz bands.

Electrical Specifications
Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180 2490–2690
7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 4.1-9.5 DIN
Connector Interface
Female Female Female Female Female Female
Connector Location Bottom Bottom Bottom Bottom Bottom Bottom
Gain, dBi 15.5 15.5 17.3 17.4 17.5 17.2
Beamwidth, Horizontal, degrees 64 63 71 69 66 60
Beamwidth, Vertical, degrees 11.2 10.3 5.6 5.4 5.1 4.3
Beam Tilt, degrees 0–10 0–10 0–8 0–8 0–8 0–8
USLS (First Lobe), dB 15 16 15 16 15 18
Front-to-Back Ratio at 180°, dB 28 31 31 29 25 26
CPR at Boresight, dB 20 19 20 20 18 16
CPR at Sector, dB 9 9 9 9 7 4
Isolation, dB 25 25 25 25 25 25
Isolation, Intersystem, dB 30 30 30 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -150
Input Power per Port, maximum,
350 350 300 300 300 250
watts
Polarization ±45° ±45° ±45° ±45° ±45° ±45°
Impedance 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm

Electrical Specifications, BASTA*

Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180 2490–2690
Gain by all Beam Tilts, average, dBi 15.0 15.1 17.0 17.1 17.1 17.1
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.3 ±0.3 ±0.3 ±0.6
0 ° | 15.0 0 ° | 15.0 0 ° | 16.8 0 ° | 17.0 0 ° | 17.0 0 ° | 17.1

Gain by Beam Tilt, average, dBi 5 ° | 15.1 5 ° | 15.1 4 ° | 17.0 4 ° | 17.1 4 ° | 17.1 4 ° | 17.2

10 ° | 15.0 10 ° | 15.0 8 ° | 17.0 8 ° | 17.1 8 ° | 17.1 8 ° | 17.0

Beamwidth, Horizontal Tolerance, degrees ±2.5 ±1.8 ±3.2 ±2.7 ±5 ±6.6

Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.6 ±0.2 ±0.2 ±0.4 ±0.3
USLS, beampeak to 20° above beampeak, dB 16 17 16 17 16 19
Front-to-Back Total Power at 180° ± 30°, dB 24 26 26 25 23 23
CPR at Boresight, dB 21 20 22 22 21 16
CPR at Sector, dB 9 10 13 10 8 5

* CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA,
download the whitepaper Time to Raise the Bar on BSAs.

Array Layout

©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 4
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 25, 2017 January 25, 2018
Product Specifications
DHHTT65B
DHHTT65B--3XR

General Specifications
Operating Frequency Band 1710 – 2180 MHz | 2490 – 2690 MHz | 790 – 960 MHz
Antenna Type Sector
Band Multiband
Performance Note Outdoor usage

Mechanical Specifications
RF Connector Quantity, total 10
RF Connector Quantity, low band 2
RF Connector Quantity, high band 8
RF Connector Interface 4.1-9.5 DIN Female | 7-16 DIN Female

©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 2 of 4
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 25, 2017 January 25, 2018
Product Specifications
DHHTT65B
DHHTT65B--3XR

Color Light gray

Grounding Type RF connector inner conductor and body grounded to reflector and
mounting bracket
Radiator Material Copper | Low loss circuit board
Radome Material ASA, UV stabilized
Reflector Material Aluminum
RF Connector Location Bottom
Wind Loading, frontal 618.0 N @ 150 km/h
138.9 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 150 mph

Dimensions
Length 1832.0 mm | 72.1 in
Width 301.0 mm | 11.9 in
Depth 181.0 mm | 7.1 in
Net Weight, without mounting kit 20.6 kg | 45.4 lb

Remote Electrical Tilt (RET) Information

Input Voltage 10–30 Vdc
Power Consumption, idle state, maximum 2.0 W
Power Consumption, normal conditions, maximum 13.0 W
Protocol 3GPP/AISG 2.0 (Multi-RET)
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male

Packed Dimensions
Length 1954.0 mm | 76.9 in
Width 409.0 mm | 16.1 in
Depth 299.0 mm | 11.8 in
Shipping Weight 33.2 kg | 73.2 lb

Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant by Exemption
China RoHS SJ/T 11364-2006 Above Maximum Concentration Value (MCV)
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

Included Products
BSAMNT-1 — Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one
scissor top bracket set and one bottom bracket set.

©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 3 of 4
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 25, 2017 January 25, 2018
Product Specifications
DHHTT65B
DHHTT65B--3XR

* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance

©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 4 of 4
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 25, 2017 January 25, 2018