GB English

CT 中文

MEMORY CARD slots MEMORY CARD（記憶卡）插口

“ ” product family logo “ ”家族企業標誌

Instruction Manual 1 (standby)/RESET button 1（預備）/RESET（再啟

and 1 indicator 動）按鈕和 1 顯示燈
Thank you for purchasing the PlayStation®2
computer entertainment system.
Before using this product, carefully read this IR receiver 紅外線接收器
manual and retain it for future reference.
A (open) button and A（打開）按鈕和
A indicator A 顯示燈
使用說明書
感謝您購買 PlayStation2 電腦娛樂系統- Disc tray 光碟托盤
使用本機以前﹐請先詳細閱讀本說明書﹐並妥善保
存﹐以備將來參考之用-
Controller ports 控制器端子

USB connectors USB 連接埠

L2 button, R2 button, L2 按鈕﹐R2 按鈕

L1 button, R1 button L1 按鈕﹐R1 按鈕

Directional buttons 方向按鈕

f button, a button, f 按鈕﹐a 按鈕﹐

✕ button, s button ✕ 按鈕﹐s 按鈕

START button START（開始）按鈕

ANALOG mode button ANALOG（類比）方式開關

TM

SELECT button SELECT（選擇）按鈕

Left analog stick, 左類比操作桿﹐

SCPH-55007 GT right analog stick,
L3 button, R3 button
右類比操作桿﹐
L3 按鈕﹐R3 按鈕

© 2003 Sony Computer Entertainment Inc. All rights reserved.

3-089-670-31(1)
2 WARNING Precautions
Safety Do not touch the connectors on the console
To prevent fire or shock hazard, do not This product has been designed with the highest concern Do not touch the metal parts of, or insert foreign objects
for safety. However, any electrical device, if used into, the connectors on the console.
expose the unit to rain or moisture. improperly, has the potential for causing fire, electrical
shock or personal injury. To help ensure accident-free Do not expose the console to cigarette
To prevent fire or shock hazard, do not place operation, follow these guidelines: smoke or dust
• Observe all warnings, precautions and instructions. When setting up the PlayStation®2 console, avoid places
a container filled with liquids on top of the • Stop use immediately if the device functions in an subject to excessive cigarette smoke or dust. Cigarette
console. abnormal manner, or produces unusual sounds or smells. smoke residue or dust build-up on internal components
• Never connect cables of types other than those specified such as the lens, may cause the console to malfunction.
To avoid electrical shock, do not open the in this manual to the line connector. Connect only
cables of the proper type for each connector. Cleaning the vents
cabinet. Refer servicing to qualified
• If the device does not operate properly, call the Dust can accumulate in both the front and rear vents of
personnel only. PlayStation® service line number listed on your the PlayStation®2 console. Check the vents from time to
warranty card for technical assistance. time and remove any accumulated dust with a low-
powered vacuum cleaner.
Caution Use and handling
The use of optical instruments with this • Do not throw or drop the console or subject the item Disc handling
to strong physical shock. • Do not leave discs near a heat source, in direct
product will increase eye hazard. As the
• Do not place the console on surfaces that are unstable, sunlight, or in high humidity.
laser beam used in this unit is harmful to tilted or subject to vibration. • Store discs in their cases when they are not being used.
eyes, do not attempt to disassemble the • Never move or change the position of a console while Stacking discs or standing them at an angle without
cabinet. it is turned on. putting them in their cases can cause the discs to warp.
• Do not expose the console to high temperatures, high • Do not touch the disc surface when handling a disc;
Refer servicing to qualified personnel only. humidity or direct sunlight (use in an environment hold it by the edges.
where temperatures range 5°C – 35°C). • Do not stick paper or tape onto the disc.
• Do not place the console in locations subject to
Read carefully before sudden temperature change (e.g. temperature
• Do not write on the disc with a marker, etc.
• Fingerprints, dust, dirt or scratches on the disc can
changes of 10°C per hour or more).
operating your PlayStation®2 • Do not leave the console in a car with its windows
distort the picture or reduce sound quality. Always
handle carefully and make sure discs are clean before
console closed (particularly in summer) as this may warp the
product exterior or cause the product to malfunction. use.
A few people may experience epileptic seizures when • Do not use the console in a dusty location. • Clean discs using a soft cloth, lightly wiping from the
viewing flashing lights or patterns in our daily • Do not allow liquid or small particles to get into the center outwards.
environment. These persons may experience seizures console. • Do not use solvents such as benzine, commercially
while watching TV or playing video games, including • Do not place the console close to magnetic fields such as available cleaners not intended for CDs or anti-static
DVD videos or games played on the PlayStation®2 those produced by magnets, loudspeakers or television spray intended for vinyl LPs as these may damage your
console. Players who have not had any seizures may sets. disc.
nonetheless have an undetected epileptic condition. • Do not put heavy objects on the console.
• Do not touch the metal parts or insert foreign objects Moisture condensation
Consult your physician before operating the PlayStation®2 If the console or the disc is brought directly from a cold
into the connectors of the console.
console if you have an epileptic condition or experience location to a warm one, moisture may condense on the
• When you do not intend to use the console for an
any of the following symptoms while watching TV extended period of time, disconnect the power plug lens inside the console or on the disc. Should this occur,
programs or playing video games: altered vision, muscle for the PlayStation®2 console from the electrical the console may not operate properly. In this case,
twitching, other involuntary movements, loss of outlet. remove the disc and do not put the disc back in until the
awareness of your surroundings, mental confusion, and/ • When disconnecting the power plug from an electrical moisture evaporates. (This could take several hours.)
or convulsions. outlet, pull it out by grasping the plug. Never pull the If the console still does not operate properly, call the
cord itself. PlayStation® service line number listed on your
Some PlayStation® format software titles may perform • Do not place any rubber or vinyl materials on the warranty card for technical assistance.
differently on the PlayStation®2 console than they did on exterior of the console for an extended period of time.
Doing so may damage the plastic surface. Cleaning the console
the PlayStation® console, or may not perform properly on
• To help prevent eye strain, take a break of about 15 For safety reasons, before cleaning the console, 1) turn
the PlayStation®2 console. For more information, call the minutes during every hour of play. off the PlayStation®2 console using the main power
PlayStation® service line number listed on your warranty • Use only the supplied AC power cord. switch on the console rear and 2) disconnect the power
card for technical assistance. • Unplug all cords and cables before moving the console. plug from the electrical outlet.
• Do not use paint thinner, solvents or other chemicals to
Checking the AC power cord clean the exterior of the console, as these may damage
To help ensure safe operation of this product, regularly the surface. When using a commercially available
inspect the AC power cord for wear and tear. If the cord is cleaning cloth, follow the instructions supplied with the
damaged, discontinue use immediately and call the
cloth.
PlayStation® service line number listed on your warranty
• If the exterior of the console becomes dirty, soak a soft
card for technical assistance.
cloth in a mild detergent solution diluted with water,
tightly squeeze the cloth to remove the excess liquid,
wipe the affected area of the exterior, and finish by
wiping with a dry cloth.
 Discs that can be played with the PlayStation®2 console 3
Never disassemble the console Irregularly shaped discs
PlayStation®2 format PlayStation®2 format PlayStation® format GB
• Use your PlayStation®2 console according to the Do not use irregularly shaped CDs or DVDs
instructions in this manual. No authorization for the DVD-ROM CD-ROM CD-ROM (for example, heart- or star-shaped discs) as

Getting started
analysis or modification of the PlayStation®2 console,
Disc logo they may cause the console to malfunction.
nor the analysis and use of the product’s circuit “ ”, PlayStation®2 logo “ ”, PlayStation®2 logo PlayStation® logo and
configurations, is provided. and and designation
• There are no user-serviceable components inside the Notes on playback operations of DVD
designation designation video
PlayStation®2 console. Disassembling the console will
void the warranty. Additionally, there is a risk of • This console plays back DVD video as originally
Disc color Silver Blue Black
exposure to laser radiation as well as to electrical designed by the software producers. Some of the
shock hazards. playback features of this console may not have been
Contents Audio and video incorporated into the DVD video design. As a result
Notes on safety when using the analog some playback features may not be available with
controller (DUALSHOCK®2)* Disc size 12 cm
certain software. Refer to the instructions supplied
• Stop using the console immediately if you begin to with your DVD video for details.
feel tired or if you experience discomfort or pain in • In rare instances, certain DVD videos may not
your hands or arms while operating the analog Audio CDs DVD videos*3 DVD-RW (VR mode) operate properly with PlayStation®2. This is
controller (DUALSHOCK®2). If the condition persists, primarily due to variations in the manufacturing
consult a doctor. Disc logo
process or software encoding of the DVD video
• The analog controller (DUALSHOCK®2) is intended
software. If you experience problems, try restarting
for use with the hands only. Do not bring it into close
your DVD video. If problems persist, for more
contact with your head, face or the bones of any other
information call the publisher of the DVD video or
part of the body.
• The vibration function of the analog controller contact the PlayStation® service line number listed
Contents Audio Audio and video Audio and video on your warranty card for technical assistance.
(DUALSHOCK®2) can aggravate injuries. Do not use
the vibration function if you have any ailment or *1 *2
injury to the bones, joints or muscles of your hands or
Disc size 12 cm 8 cm 12 cm 8 cm 12 cm 8 cm*2
arms. Note that some PlayStation®2 and PlayStation®
format software titles set the vibration function to
The “DVD VIDEO” and “DVD-RW” logos are trademarks.
“On” by default. In most cases, the vibration function
can be set to “Off” in the options menu of the *1 When you position the console vertically and play an 8 cm audio CD, use an optional adaptor.
software. Do not play such titles using the analog *2 When playing an 8 cm DVD video or DVD-RW disc, always place the console in the horizontal position.
controller (DUALSHOCK®2) unless you have set the *3 The term “DVD videos” refers to DVD-VIDEO, DVD-R, DVD+R, DVD+RW discs as well as DVD-RW discs recorded in
vibration function to “Off”. Video mode.
• Avoid prolonged use of the analog controller DVD video systems and regional restrictions Notes on the playback of DVD-R/DVD-RW/
(DUALSHOCK®2). Take a break at about 30 minute
intervals. •This console conforms to the NTSC broadcast DVD+R/DVD+RW discs*
* These notes also apply to the analog controller standard. You cannot play discs recorded for Some discs recorded using DVD-R/DVD-RW/
(DUALSHOCK®). other broadcast standards (such as PAL or DVD+R/DVD+RW devices may not be
SECAM) on this console. playable due to scratches, dirt, dust,
•Some DVD VIDEOs are marked with region fingerprints or problems encountered during
numbers such as 3 . The number contained recording, or due to the state of the disc when
within the symbol represents the region the recording was made. Only discs that have
number of DVD players on which the disc can been finalized (a process that concludes
be played. DVD VIDEOs that do not bear this recording) after recording are playable.
symbol, or that do not display the number 3 Video recorded on CPRM (Content Protection
cannot be played on your console. for Recordable Media) compatible DVD-RW
•DVD VIDEOs with the ALL label can also be discs using the copy-once capability, will not
played on this console. play that section of video, and the message
If you attempt to play any other DVD "Playback is restricted. Cannot play." will be
VIDEOs, a message stating “This disc cannot displayed. For details, refer to the instructions
be played due to regional restrictions” will supplied with the DVD recording device.
appear on the screen. (CPRM is a copy protection system with
•Some DVD VIDEOs that have no region code scramble capability for recorded “copy-once”
markings may still be subject to area broadcast programs.)
restrictions and may not be playable on the * For details on each type of DVD media, refer to the
console. Glossary on page 28 of this instruction manual.
4 Table of contents Checking the package contents

WARNING
2 Check that you have the following items:
• PlayStation®2 console • AV cable (integrated audio/video)
Precautions
2
Getting started
Discs that can be played with the PlayStation®2 console
3
Checking the package contents
4
Part names
5
Positioning the console
5 • Analog controller (DUALSHOCK®2) • AC power cord

Connection
Connecting your console to a TV set
6
Connecting digital audio equipment
7
Connecting other digital equipment
8
Using the main menu
8 • Instruction manual (1 set)
• GRAN TURISMO 4 “Prologue” (1)
Playing a game
10
If any items are missing, contact our technical support line number listed on your warranty card for
Using memory cards
12 assistance.

Games / Audio CDs Playing an audio CD

12
Playing a DVD video
14
DVD videos
Settings and adjustments for the DVD player
19
Troubleshooting
26
Specifications
28
Additional
information
Glossary
28
WARRANTY
29
 Part names Positioning the console 5
PlayStation®2 console You can position the console either horizontally The ” ” product family logo on the disc GB
Front or vertically. tray
MEMORY CARD slots

Getting started
When positioning the console vertically, use the The “ ” product family logo on the disc tray
SCPH-10040 G vertical stand (for PlayStation ®2) can be rotated to match the horizontal or
“ ” product family logo (sold separately). If a vertical stand (for vertical positioning of the console.
PlayStation®2) is not available, set the console
in the horizontal position as shown below.
1 (standby)/RESET button and
1 indicator When positioning the console horizontally, you
can use the SCPH-10110 G horizontal stand (for
IR receiver PlayStation®2) (sold separately).

A (open) button and

A indicator

Disc tray
Logo adjustment
Controller ports

Horizontal position Vertical position

L2 button, R2 button,
L1 button, R1 button Notes
• Do not place the console in any position other than the
horizontal or vertical positions as doing so may damage it.
Directional buttons • Do not change the position of the console while it is in
operation. Doing so may damage the disc or cause the
¢ button, a button, console to malfunction.
✕ button, s button

START button

ANALOG mode button

SELECT button
Left analog stick,
right analog stick,
L3 button, R3 button
Rear

MAIN POWER switch

~ AC IN connector
AV MULTI OUT connector

DIGITAL OUT (OPTICAL)

connector

EXPANSION BAY
6 Connecting your console to a TV set
You can connect the PlayStation®2 console to most TVs or VCRs using the supplied AV cable
(integrated audio/video) as described below. The console can also be connected to other types of TVs Connecting to a VCR
using specialized cables and adaptors, which are sold separately. For details, see the following Connect your PlayStation®2 console to the VCR
sections: using the supplied AV cable (integrated audio/
•Connecting to a TV with an S VIDEO input connector (this page) video) matching the plug colors. When playing a DVD video
•Connecting to a TV with component video input connectors (page 7) If your VCR is monaural, do not connect the
The instructions in the above sections assume audio output through TV speakers. red plug. VCR
However, when playing a DVD video, do not
Caution connect the console to a VCR. If you do,
For safety reasons, turn off the console and remove the power plug from the electrical outlet before making or adjusting Connect directly
connections. picture quality may be reduced. Connect the
console directly to the TV. PlayStation®2 TV
Note console
If the picture quality is reduced when using progressive scan with a TV that supports progressive scan, try viewing in
After connecting
standard interlace mode. For details on progressive mode, see “Progressive” on page 22. Set your TV and VCR adjustments
appropriately.
Connecting to a TV with audio/video inputs Refer to the instruction manuals supplied with
your TV and VCR for details.
Connect your PlayStation®2 console to the TV using the supplied AV cable (integrated audio/video).
When connecting, match the color-coded cords to the appropriate jacks on the components: yellow
(video) to yellow, red (right audio) to red and white (left audio) to white.
Connecting to a TV with an S VIDEO input connector
Connect your PlayStation®2 console to the
After connecting S VIDEO input connector on the TV using the
Set your TV to the appropriate video input mode. Refer to the instruction manual supplied with your SCPH-10060 G S VIDEO cable (sold separately).
TV for details. You will get a better picture than when using
When connecting to a wide screen TV (16:9 aspect ratio) the AV cable (integrated audio/video).
Set “Screen Size” in the System Configuration menu to “16:9.” For details on the System After connecting
Configuration menu, see pages 8-9. Set your TV to the appropriate video input
To AV MULTI OUT
If your TV is monaural mode (such as “S VIDEO”). connector
Do not connect the red plug. If you want to hear both left and right sounds from a monaural TV, use a commercially
available dual phono to single phono (stereo to monaural) type audio cable (sold separately). To S VIDEO To audio input
input (right)
To audio input
(left)
EXPANSION BAY

MAIN POWER
switch

DIGITAL OUT (OPTICAL) ~ AC IN connector

To video input connector

To audio input
(left) AV MULTI OUT
To audio input connector
(right)

AV cable (integrated audio/video) AC power cord

 Connecting digital audio equipment 7
This section explains how to connect the Connect the device through the DIGITAL OUT
Connecting to a TV with component video input connectors GB
PlayStation®2 console to audio equipment with (OPTICAL) connector using an optical digital

Connection
If your monitor or projector has component digital connectors (such as Dolby Digital cable (sold separately).
video input connectors (Y, CB/PB, CR/PR), optical (AC-3) output). Using digital receivers
connect your PlayStation®2 console using the and amplifiers, you can enjoy features such as PlayStation®2
console
SCPH-10100 G component AV cable (for multi-channel sound and surround sound.
PlayStation®2) (sold separately). This will Optical digital cable
provide the best picture. (sold separately)
Connecting to a receiver or
Before connecting
If you connect your PlayStation®2 console to a
amplifier, “MD (Minidisc)” deck Audio device with a
built-in DTS Dolby
television using the component AV cable To AV MULTI OUT
connector
or “DAT (Digital Audio Tape)” Digital or MPEG
without first setting the “Component Video
To audio To component deck with a digital connector decoder
Out” option under the System Configuration input video input Speakers
Use a commercially available optical digital
menu to “Y Cb/Pb Cr/Pr,” the TV screen connectors
cable (sold separately) and set “DIGITAL OUT
might not display properly. Before connecting Settings for the DVD player on your
(OPTICAL)” in the System Configuration menu
your console with the component AV cable, PlayStation®2 console
to “On” (the default setting).
first use the supplied AV cable (integrated You may need to adjust settings for the DVD
For details on the System Configuration menu,
audio/video) and make sure that the player depending on the devices to be
see pages 8-9.
“Component Video Out” option is set to connected.
“Y Cb/Pb Cr/Pr.” PlayStation®2 console rear For details on using the Setup display, see
pages 20-25.
Notes MAIN
Connected device
POWER
• When you connect an audio device with a built-
• The PlayStation®2 console is not compatible with
HDTV unless the proper software and connecting ~ DIGITAL INPUT in DTS decoder
AC IN

cables are used. Refer to the instruction manual Set “DIGITAL OUT (OPTICAL)” to “On” and
supplied with your TV for details. DIGITAL OUT
(OPTICAL) AV MULTI OUT OPTICAL then set “DTS” to “On” in the “Audio Setup”
• You must use the component AV cable to view DVD display.
video in progressive scan. If picture quality is reduced
when using progressive scan, try viewing in normal • When you connect an audio device with a built-
(interlace) mode. For details, see “Progressive” on page in Dolby Digital decoder
22. Set “DIGITAL OUT (OPTICAL)” to “On” and
Notes then set “Dolby Digital” to “On” in the
• Refer also to the instructions supplied with the device “Audio Setup” display.
to be connected.
Do not connect your PlayStation®2 console Note about bouncing effect • You cannot directly make digital audio recordings of • When you connect audio equipment with a built
to a projection TV Some TVs or monitors may experience a bouncing effect discs recorded in Dolby Digital format DTS or MPEG in MPEG decoder
Static, non-moving images, such as DVD menus, in their pictures when using the PlayStation®2 console. AUDIO format using an MD or a DAT deck. Set “DIGITAL OUT (OPTICAL)” to “On” and
configuration displays or paused images may leave a There is nothing wrong with the PlayStation®2 console then set “MPEG” to “On” in the “Audio
faint image permanently on the TV screen if left on for or the way it is manufactured. The problem technically
lies within the television. If you encounter such a
Setup” display.
extended periods of time.
Projection TVs, except those of LCD screen types are problem with your television/monitor, please contact Connecting to an audio device
our technical support line listed on your warranty card Note
more susceptible to this than other types of displays. Do
not operate the console in such a manner that this could for technical assistance.
with a built-in DTS*1 Dolby Refer to the operating and setup instructions for the audio
occur. Refer to the instruction manual supplied with Digital*2 or MPEG decoder (DVD device to be connected.
your TV for details.
video only) *1 “DTS” and “DTS Digital Out” are trademarks of Digital
By connecting to audio equipment with a built- Theater Systems, Inc.
*2 Manufactured under license from Dolby Laboratories.
in DTS Dolby Digital or MPEG decoder (sold
“Dolby” and the double-D symbol are trademarks of
separately), you can play back sound recorded Dolby Laboratories.
on DVD videos in Dolby Digital (AC-3) DTS or Confidential unpublished works. ©1992-1997 Dolby
MPEG AUDIO format to reproduce the effect Laboratories. All rights reserved.
of listening in a movie theater or concert hall.
8 Connecting other digital equipment Using the main menu
Connecting a device using the
When you turn on the console for the first time 1 Select the icon of the memory
you will be prompted to adjust basic language
card (8MB) (for PlayStation®2) or
Universal Serial Bus (USB) and time settings. These settings can be
changed later through the System memory card where the data you
interface
The two USB connectors on the front of the
Configuration menu. For details, see “Using the want to check/copy/delete is
console can be used to connect USB-compatible
System Configuration menu” (pages 8-9).
saved, and then press the ✕
After setup, the main menu is displayed
devices. Also refer to the instructions supplied
whenever you turn on the console without a button.
with the device to be connected.
disc inserted.
2 Check/copy/delete data
according to the instructions on
the screen.
Note
While copying or deleting data, do not remove the
memory card (8MB) (for PlayStation®2) or memory card.

You can move to the Browser screen or the Using the System Configuration
System Configuration menu from the main menu
USB connectors menu. Using the System Configuration menu, you can
change or update your system settings for the
Note Using the Browser screen PlayStation®2 console.
Not all USB-compatible products work with the You can do the following operations using the Changes to these settings are saved and remain
PlayStation®2 console. See the appropriate USB-
Browser screen: in effect even after you turn off the console.
compatible product’s user manual for more information. The default settings are underlined.
• Check/copy/delete game data on the
memory card (8MB) (for PlayStation®2) or
memory card
1 Select “System Configuration”
• Start PlayStation® or PlayStation®2 format using the directional buttons and
software press the ✕ button.
• Play an audio CD The System Configuration menu is
• Play a DVD video
displayed.
Select “Browser” using the directional buttons
and press the ✕ button. 2 Select the item you want using
The Browser screen is displayed. The memory the directional buttons and press
card (8MB) (for PlayStation®2), memory card or
disc inserted in the console are displayed as
the ✕ button.
icons.
x Clock Adjustment
Checking/copying/deleting data Sets the clock.
You can copy data from one memory card (8MB)
(for PlayStation®2) or memory card to another or 1 Use the directional buttons to set
delete data you no longer wish to keep. the month and then press the
You cannot, however, copy data of the
PlayStation®2 format software to an right directional button.
SCPH-1020 HI memory card. Use the same method to set the day,
Insert the memory card (8MB) (for year, hour, minute and second. To
PlayStation®2) or memory card in advance. return to the previous menu, press the
left directional button.
2 Press the ✕ button to start the
clock.
 9
Select optional settings for the clock •Y Cb/Pb Cr/Pr : Select this when you connect x Auto-diagnosis 2 Select the item you want using GB
Select “Clock Adjustment” using the the console to the component video input The PlayStation®2 console automatically adjusts the directional buttons and press

Connection
directional buttons and press the ¢ button. You connectors. its internal settings for best possible disc
can set the following optional items. •RGB : Select this when you connect the playback.
the ✕ button.
Time Format console to the RGB input connector. However, when auto-diagnosis is set to “On” Note
Note Adjusted settings automatically return to “Standard”
•12 hour clock the console makes additional adjustments that
(default setting) when you press the 1/reset button or
•24 hour clock You can output PlayStation® and PlayStation®2 format may allow discs that were previously turn off the console.
software in either RGB or Y Cb/Pb Cr/Pr format.
Date Format unplayable to be played.
However, the PlayStation®2 console has been designed to
•MM/DD/YYYY Diagnosis x Clearing the Progressive setting
override the “Component Video Out” setting in the
•DD/MM/YYYY System Configuration menu and output all DVD video •Off You can clear the DVD player’s Progressive
•YYYY/MM/DD software in Y Cb/Pb Cr/Pr. setting.
•On
Time Zone x Remote Control Clear Progressive Setting
Select the appropriate time zone. Set this option when using the DVD remote 1 Select “Console” using the • No

Daylight Savings Time (Summer Time) control (for PlayStation®2) which is sold directional buttons and press the • Yes

Set this item to “Daylight Savings Time

separately.
•Gameplay Function On: Select this when
f button. 1 Use the directional buttons to
(Summer Time)” when daylight savings time is select “DVD player”, and press
in effect.
operating PlayStation®2 or PlayStation®
format software using the DVD remote
2 Select “On” using the directional the f button.
•Standard (Winter Time) buttons and press the ✕ button.
•Daylight Savings (Summer Time)
control.
2 Press the ✕ button.
x Screen Size
•Gameplay Function Off: Select this when not
operating PlayStation®2 or PlayStation®
3 Insert a disc.
3 Use the directional buttons to
The console automatically starts the
Selects the display mode according to the TV to format software using the DVD remote
diagnosis.
select “Yes” and press the ✕
be connected. control.
•4:3 : Select this when you connect a standard Notes Note button.
TV to the console. • When Remote Control is set to “Gameplay Function The diagnosis setting automatically returns to “Off” The Progressive setting is not cleared
On”, some PlayStation®2 or PlayStation® format (default setting) when you press the 1/reset button or immediately after it is turned off. The
•Full : Select this when you connect a standard software may stop operating normally when a start playing a PlayStation® format disc, PlayStation®2
TV to the console. The black margins on the controller is removed from controller port 1. Set to format disc or a DVD video disc.
setting will only be cleared when the
upper and lower portions of the screen are cut “Gameplay Function Off” if this happens. DVD video starts playback.
x PlayStation® Driver
off.
•16:9 : Select this when you connect a wide-
• Operation using the DVD remote control buttons may
not work in some cases. Also, the DVD remote control The PlayStation® Driver is a program for 4 Press the a button to return to
screen TV to the console. will not work when you press two or more buttons at loading PlayStation® format software. the main menu. Then use the
the same time. Disc Speed directional buttons to select
x DIGITAL OUT (OPTICAL) • Some unlicensed 3rd party peripherals may not work
Selects whether to output signal through the with “Gameplay Function” set to “On”. Note that the
•Standard: Normally select this position. “Browser”, and press the ✕
•Fast: Loading time for a PlayStation® format
DIGITAL OUT (OPTICAL) connector.
use of such peripherals is not recommended and will
software disc can be shortened. button.
void your warranty.
•On : Select this when you connect with an
optical digital cable (sold separately). x Language
Depending on the software, there may be no
effect or the software may unexpectedly fail. 5 Use the directional buttons to
Normally select this option. Selects the language for the on-screen display. In this case, select “Standard.” select the DVD video icon, and
•Off : Select this when you do not want sound •English
Texture Mapping press the ✕ button.
signal to be output via the DIGITAL OUT •Traditional Chinese
•Standard: Normally select this position. The DVD player’s Progressive setting
(OPTICAL) connector. •Smooth: You can make the display smoother is cleared, and playback begins.
x Component Video Out Checking version information when playing certain PlayStation® format Notes
If your TV, monitor or projector has an RGB You can check version information or settings of software titles. • This setting can be cleared only when “Progressive” is
input connector or component video input various features. Depending on the software, there may be no set to “On”. When “Progressive” is set to “Off”, the
effect. In this case, select “Standard.” Options menu under DVD Player is not displayed.
connectors (Y, CB/PB, CR/PR) that conform to At the main menu, press the ¢ button. • For details on setting “Progressive” to “On”, see
the output signals of the console, set this item.
When connecting the console using the
The Version Information screen is displayed.
The default settings are underlined.
1 Select “PlayStation® Driver” “Progressive” under “Settings and adjustments for the
DVD player” on page 22.
supplied AV cable (integrated audio/video) or using the directional buttons and • The progressive setting is not cleared if any of the
following occur before step 5 is completed:
S VIDEO cable (sold separately), you do not press the f button. – The console enters standby mode after the
need to set this item. 1 (standby)/reset button has been pressed.
– The console is turned off using the main power
switch on the console rear.
10 Playing a game
4 A disc that cannot be played with the
Starting a game Screens that appear at start-up PlayStation®2 console is inserted.
When turning on the console without first
1 Turn on the console using the 4 Press the A (open) button. inserting a disc
main power switch on the The disc tray opens. Screen 1 is displayed.
• When you insert a PlayStation®2 or
console rear. 5 Place a disc on the disc tray with PlayStation® format disc after screen 1 has
The 1 (standby) indicator on the appeared, screen 2 or 3 will be displayed
the label side facing up (data
console front lights up in red to and you can start the game.
indicate that the console is now in side down). • You can move to the Browser screen or the
standby mode.
6 Press the A button.
System Configuration menu from screen 1.
(For details, see “Using the main menu” on
2 Press the 1 (standby)/reset The disc tray closes. Screen 2 or 3 is page 8.)
Ending a game
button. displayed and the game is ready to When turning on the console with a disc
The 1 indicator turns green and the begin. already inserted 1 Press the A (open) button.
start-up screen is displayed. Depending on the type of disc inserted, screen The disc tray opens.
Note 2, 3 or 4 will be displayed.
3 Plug the analog controller Set the analog controller (DUALSHOCK®2) to the
appropriate mode for the software (see “Mode switching
If screen 4 is displayed, it is possible that the 2 Remove the disc.
(DUALSHOCK®2) into a controller and the mode indicator” on page 11). Refer to the inserted disc is not a PlayStation® or
port of the console. appropriate software manual for details. PlayStation®2 format disc. Check the disc type 3 Press the A button.
(page 3). The disc tray closes.
1 No disc is inserted (main menu). 4 Press the 1/reset button for
more than three seconds.
1 The 1 indicator turns red and the
console enters standby mode.

2 PlayStation®2 format DVD-ROM / 4

2 CD-ROM is inserted.
3 1,3
4,6 2
When not intending to play a game for an
5 extended period of time
Turn the power off at the main power switch
on the console rear, disconnect the power plug
Restarting a game 3 PlayStation® format CD-ROM is inserted. from the electrical socket.
Press the 1/reset button. (Be sure not to hold
the button down for any length of time, as that
will put the console in standby mode.)
Do not accidentally press the 1/reset button
while playing a game, or the game will restart.
 11
•You can switch between digital and analog
Changing from one game to Using the analog controller Vibration function GB
modes. When in analog mode, you can enjoy
another (DUALSHOCK®2)

Games / Audio CDs

the analog operation of the left analog stick The analog controller (DUALSHOCK®2)
There is no need to turn off the console when •The analog controller (DUALSHOCK®2) can and right analog stick. features a vibration function when the function
you want to change games. be used with PlayStation®2 and PlayStation® PlayStation®2 format software is supported by the software title. The vibration
format software. Left analog stick / right analog stick function can be set to ON or OFF on the
1 Press the A (open) button. •You can switch between digital and analog PlayStation® format software software option screen.
The disc tray opens. modes. When the controller is in analog Left analog stick / right analog stick Notes
mode, the following buttons and sticks may •You can use the vibration function. • When the analog controller (DUALSHOCK®2) is not
2 Remove the disc. operate in analog fashion depending on the being used, turn the console off or unplug the
features supported by the software title. Refer controller from the console.
3 Place a new disc in the disc tray. to the software manual for details. Mode switching and the mode • Before using the vibration function, please read “Notes
on safety when using the analog controller
PlayStation®2 format software indicator
4 Press the A button. Directional buttons, ¢ , a , ✕ , s buttons, left The analog controller (DUALSHOCK®2) can be
(DUALSHOCK®2)” on page 3.

The disc tray closes. analog stick, right analog stick, L1, R1, L2, R2 switched between two modes by pressing the
buttons analog mode button.
Before using the analog
5 Press the 1 (standby)/reset PlayStation® format software Each time the analog mode button is pressed, controller (DUALSHOCK®2)
button to reset. Left analog stick / right analog stick the mode changes as follows:
(Note: holding the 1/reset button •You can use the vibration function.
Digital mode (indicator: off)
down for any length of time may Using the analog controller Xx
cause the console to go into standby (DUALSHOCK®) (sold separately) Analog mode (indicator: red)
mode.) Note
•The analog controller (DUALSHOCK®) can Switch to the appropriate mode for use.
After the start-up screen, screen 2 or also be used with PlayStation®2 and Note, however, that some software makes this adjustment
3 is displayed and the game begins. PlayStation® format software. automatically. In such cases, the analog mode button is
After turning the console on, rotate the left and right
overridden by the software. For details, refer to the analog sticks once with your thumbs before starting a
software manual. game. Do not twist the analog sticks, but rotate as if
drawing a circle as shown in the diagram above.

5
Digital mode (indicator: off) Analog mode (indicator: red)
1,4
L2 button R2 button
2,3 L1 button R1 button
Note L2 button R2 button SELECT START
With a multi-disc game, follow steps 1 through 4 to switch L1 button R1 button button button
SELECT START
discs. Refer to the software manual for details. button button ¢ button
¢ button
Directional a button
buttons
Directional a button
buttons
✕ button

✕ button Left analog stick / s button

L3 button* Right analog stick /
s button R3 button*
ANALOG mode button ANALOG mode button
Mode indicator: Off Mode indicator: Red

* The R3 and L3 buttons function when the sticks are pressed.

12 Using memory cards Playing an audio CD
You can save and load game or other data using
the memory card (8MB) (for PlayStation®2) or Inserting the memory card (8MB) Playing an audio CD Operating the CD player
memory card (each sold separately). (for PlayStation®2) or memory The CD player can be operated using the
card 1 Press the A (open) button. Control Panel or directly with the buttons on
The disc tray opens. the analog controller (DUALSHOCK®2). You
Differences between the memory Insert the memory card (8MB) (for PlayStation®2) can also operate the CD player using the
card (8MB) (for PlayStation®2) and or the memory card into the MEMORY CARD
slot, with the arrow side up.
2 Place a disc on the disc tray with SCPH-10420 G DVD remote control (for
memory card the label side facing up (data PlayStation®2), which is sold separately.
During playback, select the icon in the CD
side down). operation screen using the directional buttons.
When playing PlayStation®2 format
software, use the memory card (8MB*) 3 Press the A button. Then press the X button.
(for PlayStation®2) (1). N Start playback
The disc tray closes.
When playing PlayStation® format software, X Pause
use the memory card (2). 4 Use the directional buttons to x
.
Stop playback
Find the beginning of the current or
select the audio CD icon, and previous track
For the PlayStation® game console, units of MEMORY CARD slot 1 MEMORY CARD slot 2
game data are described as “memory blocks,” press the ✕ button. > Find the beginning of the next track
however for the PlayStation®2 console, they are Notes on using the memory card (8MB) (for The audio CD screen is displayed. m Fast reverse
described as “KB” (kilobytes). PlayStation®2) or memory card with a M Fast forward
* 8 MB = 8,000 KB
multitap 5 Select the track number you
L2 button: R2 button:
1 Memory card (8MB) (for PlayStation®2)
•When using PlayStation®2 format software,
want to play and press the ✕ m (Fast M(Fast
use the SCPH-10090 G multitap reverse) forward)
(sold separately) (for PlayStation®2). button.
The memory card (8MB) (for PlayStation®2) When using PlayStation® format software, Playback begins.
can save and load PlayStation®2 format L1 button: R1 button:
use the SCPH-1070 G multitap. . > (Next)
software game data. Each memory card (8MB) •When you insert the SCPH-1070 G multitap into (Previous)
(for PlayStation®2) can save about 8 MB of
game data, but some of this may be used as file
controller port 1, do not insert the memory card Ending audio CD playback
(8MB) (for PlayStation®2) or memory card into
control information.
The memory card (8MB) (for PlayStation®2)
memory card slot 1 of the PlayStation®2
console. This also applies when you insert a
1 Press the A (open) button.
uses MAGICGATE, a technology that helps multitap into controller port 2. If you do so, the
The disc tray opens.
protect copyrighted content through data
encryption and hardware authentication.
data may be lost. 2 Remove the disc. SELECT button: START button:
x (Stop) N (Start)/ X (Pause)
is a term of copyright protection
technology developed by Sony Group.
Checking/copying/deleting 3 Press the A button.
does not guarantee compatibility with game data The disc tray closes.
other products bearing the “MagicGate” trademark. You can copy game data from one memory
card (8MB) (for PlayStation®2) or memory card 4 Press and hold down the Music discs encoded with copyright
protection technologies
2 Memory card (sold separately)
to another or delete data you no longer wish to 1 (standby)/reset button for The audio CD playback feature of this product is
The memory card can save and load
keep. more than three seconds. designed to conform to the Compact Disc (CD)
PlayStation® format software game data. Each
You cannot, however, copy game data of the standard. Recently, some record companies have
memory card can save 120 KB (15 memory The console enters standby mode.
PlayStation®2 format software to the memory started marketing music discs encoded with
blocks) of game data.
card. copyright protection technologies. Some of these
Note music discs do not conform to the CD standard,
You cannot copy data to a memory card (8MB) (for You can check, copy and delete game data in and may not be playable on this product.
PlayStation®2) or memory card that does not have enough
the Browser screen. For details on the browser,
memory available. Before playing, check how much space
is needed to save the game and how much space is see “Checking/copying/deleting data” on
available on the memory card (8MB) (for PlayStation®2) or page 8.
memory card. Check the appropriate software manual to
determine the amount of space needed to save the data for Note
a given game. You cannot save or load game data in the Browser screen.
For details on game data saving or loading, refer to the
software manual.
 13
To play the tracks in random To play desired or random tracks repeatedly Notes on playing an audio CD with a DTS
GB
Playing in various modes order Follow steps 1 to 3, then follow the instructions audio track
• If you play an audio CD recorded in DTS format, an

Games / Audio CDs

You can change between various play modes. on playing the desired tracks in a specified or
extremely loud noise will be emitted from the analog
The default setting for “Play Mode” is
“Normal”, and the default for “Repeat” is
1 Select “Play Mode” using the random order. For details, see “To play the
desired tracks in a specified order” or “To play
audio output of an audio device connected to the AV

“Off”.
directional buttons and press the the tracks in random order” at left.
MULTI OUT connector. Be careful not to cause damage
to your audio system when the audio device's analog
Select the audio CD icon in the Browser screen, ✕ button. audio output is connected to the receiver (amplifier).
and then press the f button to change the You must connect a DTS decoder to the DIGITAL OUT
settings. 2 Select “Shuffle” using the To play a track repeatedly (OPTICAL) connector to playback DTS audio tracks.
• When DIGITAL OUT (OPTICAL) is set to "Off" in the
directional buttons and press the 1 Select “Repeat” using the System Configuration menu, you will not be able to

To play the desired tracks in a ✕ button. directional buttons and press the
hear the DTS audio from an audio CD even if the audio
device is connected using an optical digital cable.
specified order ✕ button.
3 Press the a button to return to
1 Select “Play Mode” using the the Browser screen. 2 Select “1” using the directional
directional buttons and press the buttons and press the ✕ button.
✕ button.
4 Select the audio CD icon, and
press the ✕ button. 3 Press the a button to return to
2 Select “Program” using the The tracks are displayed in random
the Browser screen.
directional buttons and press the order. Select the track number you
✕ button. want to play, and press the ✕ button. 4 Select the audio CD icon, and
Playback begins.
press the ✕ button.
3 Select the number of the specific The tracks are displayed. Select the
track using the directional To play random tracks repeatedly track number you want to play, and
buttons, and then press the ✕ Follow steps 1 to 3, and then follow the
press the ✕ button. Playback begins.
instructions on playing all tracks repeatedly, or
button. on playing one track repeatedly. For details, see
Repeat this step to select all the tracks “To play all tracks repeatedly” or “To play a To play a track in Program Play or Shuffle
you want to play. track repeatedly” below. Play repeatedly
Follow steps 1 to 3, then follow the instructions
4 Press the a button to return to
To play all tracks repeatedly
on playing desired tracks or tracks in random
the Browser screen. order. For details, see “To play the desired
tracks in a specified order” or “To play the
5 Select the audio CD icon and 1 Select “Repeat” using the tracks in random order” at left.
press the ✕ button. directional buttons and press the
✕ button. You can go to the Play Options screen from
The tracks are displayed in their
the screen displaying the track numbers.
programmed order. Select the track
number you want to play, and press
2 Select “All” using the directional Select the small audio CD icon on the top left of

the ✕ button. Playback begins.

buttons and press the ✕ button. the screen using the up or left directional
button, and press the f button.
3 Press the a button to return to The Play Options screen is displayed, and you
To play the desired tracks repeatedly can operate the CD player in the same manner
the Browser screen.
Follow steps 1 to 4, and then follow the as in “Playing in various modes” at left.
instructions on playing all tracks repeatedly, or 4 Select the audio CD icon, and Press the a button in the Play Options screen
and the tracks are displayed.
on playing one track repeatedly. For details, see
“To play all tracks repeatedly” or “To play a
press the ✕ button. Choose the track you want to play, and press
track repeatedly” at right. The tracks are displayed. Select the the ✕ button. Playback begins.
track number you want to play, and
press the ✕ button. Playback begins.
14 Playing a DVD video
•You can also operate the DVD player using
Ending DVD video playback Operating the DVD player the DVD remote control (for PlayStation®2),
When you have finished viewing a DVD, There are three ways to operate the DVD which is sold separately.
Playing a DVD video follow the steps below to save DVD player player:
Using the analog controller (DUALSHOCK®2)
settings, return to the Browser screen or put the • You can operate the DVD player directly
Depending on the DVD video, some operations The function of each button on the analog
console in standby mode. using the analog controller (DUALSHOCK®2)
may be different or restricted. Refer to the controller (DUALSHOCK®2) is explained
as explained below.
instructions supplied with your disc. 1 Press the A (open) button. • You can operate the DVD player through the
below.

The disc tray opens and the Browser on-screen Control Panel. The Control Panel Note
1 Turn on the console using the screen is displayed. allows access to additional DVD player The direct button functions of the analog controller
(DUALSHOCK®2) cannot be used when the Control Panel
main power switch on the options and settings. For details, see “Using
console rear. 2 Remove the disc. the Control Panel” on page 15.
is displayed.

The 1 (standby) indicator on the

console front lights up in red to
3 Press the A button to close the
1 6
disc tray.
indicate that the console is now in
2 7
standby mode. 4 Press and hold down the 1/reset
2 Press the 1 (standby) /reset button for more than three DUALSHOCK 2
8
button. seconds.
The 1 indicator turns green and the The 1 indicator turns red and the 3 9
start-up screen is displayed. console enters standby mode.
3 Press the A (open) button. q;
Note
The disc tray opens. To save changes to DVD player settings you must eject the qa
4 Place a disc on the disc tray with DVD before pressing the 1 (standby)/reset button or
turning off the console using the main power switch on
qs
the label side facing up (data the console rear. 4
side down). If you experience problems playing a DVD video: 5 qd
5 Press the A button. In rare instances, certain DVD videos may not operate
properly with PlayStation®2. This is primarily due to
The disc tray closes and DVD content variations in the manufacturing process or software 1 L2 button ( Fast Reverse Search) 8 f button ( Menu)
encoding of the DVD video software. If you experience Fast reverses playback on the screen to aid Displays the disc menu of DVD-Video
is displayed on the screen.
problems, try restarting your DVD video. If problems in looking for a particular scene. discs. The content of the menu varies from
Notes persist, for more information call the PlayStation® service disc to disc.
• The PlayStation®2 console is equipped with advanced line number listed on your warranty card for technical
2 L1 button (. Previous)
playback features that can optimize audio/video assistance. Returns to the beginning of the current or 9 a button (x Stop)
quality. For details on adjusting settings to enable these previous chapter. Stops playback.
advanced features, see pages 20-25.
• If you press the A button during or after playback, the 3 Up, down, right, and left directional buttons 0 ✕ button (Enter)
Browser screen appears. Used to select items displayed on the screen. Enters the item selected on the screen.
• When playing a DVD video, do not connect the console
to a VCR. If you do, picture quality may be reduced. 4 L3 button ( Subtitle Options)* qa s button ( Top Menu)
Connect the console directly to the TV. Displays and changes DVD subtitle options. Displays the disc menu of DVD-Video
5 SELECT button discs. The content of the menu varies from
disc to disc.
Displays the Control Panel.
qs R3 button (Audio Options)*
6 R2 button ( Fast Forward Search)
Displays and changes DVD audio options.
Fast forwards playback on the screen to aid
in looking for a particular scene. qd START button (N Play/X Pause)
7 R1 button (> Next) Starts playback/Pauses and resumes
playback.
Skips to the beginning of the next chapter.
* When using a controller without the L3 or R3 buttons,
use the Control Panel to select among available subtitle
and audio options.
 15

Using the Control Panel Control Panel item list GB

DVD videos
You can select various playback modes and
adjust DVD player settings using the on-screen qf Search (page 20)
Control Panel.
Fast reverses playback on the screen to aid
Navigate the Control Panel using the analog in looking for a particular scene.
controller (DUALSHOCK®2) as described
below. qg Search (page 20)
Fast forwards playback on the screen to aid
in looking for a particular scene.
DUALSHOCK 2
qh Slow (page 20)
Changes to reverse playback in slow-
motion.
qj Slow (page 20)
Changes to playback in slow-motion.
qk N Play
Starts playback.
Directional SELECT ✕ button a button
buttons button ql X Pause
Pauses and resumes playback.
Display or turn off SELECT button w; x Stop
the Control Panel Stops playback.

Enter ✕ button wa A-B Repeat (page 18)

1 Menu (page 16) 8 Setup (page 20) Specifies a scene for playback, and starts
Cancel a button playback of the scene that has been set.
Displays the disc menu of DVD-Video Displays the Setup display for changing
Select Up, down, left, and right discs. The content of the menu varies from various picture and audio options. You can ws Shuffle Play (page 17)
directional buttons disc to disc. also choose a language for subtitles and the Starts playback of titles or chapters in
2 Top Menu (page 16) menu, set Parental Control level, and so on. random order.
Displays the disc menu of DVD-Video 9 Time Display (page 16) wd Program Play (page 16)
1 Press the SELECT button. discs. The content of the menu varies from Displays the current title or chapter Displays the Program setup screen.
The Control Panel is displayed. disc to disc. number, and the elapsed or remaining
wf Repeat Play (page 17)
3 O Return (page 16) time.
Selects repeated playback of all the titles on
Returns to the previously selected screen. 0 Help (page 19) the disc, or one title or chapter.
4 Audio Options (page 19) Displays the direct button functions of the
wg Original/Play List (page 18)
analog controller (DUALSHOCK®2).
Displays and changes DVD audio options. For DVD-RW discs recorded in VR mode.
qa Go to Chapter (page 19) /Number icons Selects Original or Play List content to play
5 Angle Options (page 19)
Used to enter the number of a chapter you back.
Displays and changes DVD viewing angles.
wish to play, or numerical codes.
6 Subtitle Options (page 19) wh Clear
qs . Previous Clears selected numbers or playback
2 Select the item you want using Displays and changes DVD subtitle
options.
Returns to the beginning of the current or modes.
the directional buttons. previous chapter.
7 Go To (page 19)
qd > Next
3 Press the ✕ button. Skips to the selected title or chapter
number or the specified time, and starts
Skips to the beginning of the next chapter.
For details on each Control Panel playback.
display item, see pages 16-25.
16 Playing a DVD video (continued)

You can use the Control Panel to set various To check playback settings To clear Resume Play 6 Press the START button.
playback modes. When playing a disc use the directional buttons If you resume playback after stopping, the
Program Play begins.
to select the (Time Display) icon, and press DVD player enters Resume Play mode. Many
the X button. Icons for currently set playback advanced settings for the DVD player are not
Using the DVD disc menu modes will be displayed in the top right corner available during Resume Play. If you want to
Program Play settings are saved and remain in
effect even after playback ends. Use the
Some DVDs allow you to select disc contents of the screen. clear Resume Play to adjust settings, select the
directional buttons to select the (Program
from a menu. When you play such DVDs, you x (Stop) icon and press the ✕ button twice.
Play) icon, and then press the ✕ button.The
can select the language for the subtitles, the
To clear all playback settings and return to Program Setup screen is displayed. Press the
language for the sound, and other options Notes
normal playback • Resume Play may not be available on some DVDs or START button to play the programmed
using the menu.
Use the directional buttons to select the for some video scenes. sequence again.
1 Use the directional buttons to icon, and press the ✕ button. • Depending on where you stop playback, the console
may resume playback from a slightly different point.
select the (Menu) or (Top • Resume Play is not available when: Changing or clearing Program
Menu) icon, and press the ✕ Playback from the last – Program Play or Shuffle Play is selected.
Play settings
– The disc tray on the console front is opened using
button. stopping point (Resume Play)
The menu is displayed. Menu content The DVD player remembers the point where
the A button.
– The console is reset or goes into standby mode after 1 Use the directional buttons to
may vary depending on the DVD. you stopped the disc, and resumes playback the 1/reset button has been pressed. select the (Program Play)
– The power is turned off using the main power
from that point. icon, and press the ✕ button.
2 Use the directional buttons to
1 During playback, press the a
switch on the console rear.
– The x (Stop) icon is selected and the X button is
select an item, and press the ✕ pressed twice during playback. 2 Use the directional buttons to
button to stop playback. select the item number you want
button.
The message, “Press [Play] to resume Playback in desired order to change, and press the ✕
viewing. To start from the beginning,
To return to the previous screen in the press [Stop] and then [Play].” appears,
(Program Play) button.
menu You can create a program to play back titles
Use the directional buttons to select the O
and then the Control Panel (page 15) is
displayed. and chapters in any order you like. 3 Use the directional buttons to
(Return) icon, and press the ✕ button. select the title number you want
This function may not be available on some
If the message “Resume function 1 Use the directional buttons to
to play, and press the ✕ button.
DVDs. cannot be used here. Play will restart select the (Program Play)
from the beginning.” appears, Resume
Play is not available.
icon, and press the ✕ button. 4 Use the directional buttons to
Using the analog controller select the chapter number you
(DUALSHOCK®2) 2 Select the N (Play) icon using 2 Use the directional buttons to
want to play, and press the ✕
the directional buttons and press select the item number, and
button.
1 Press the f or s button. the ✕ button. press the ✕ button. To clear Program Play settings, select “Clear” at
The menu is displayed. Menu content step 3, and press the ✕ button.
may vary depending on the DVD.
The DVD player starts playback from
the point where you stopped the disc
3 Use the directional buttons to
select the title number, and press
2 Use the directional buttons to in step 1.
the ✕ button. To clear all Program Play settings
select an item, and press the ✕
button. To clear the last stopping point 4 Use the directional buttons to 1 Use the directional buttons to
After step 1, select the x (Stop) icon and press select the (Program Play)
the ✕ button. select the chapter number, and
Notes press the ✕ button. icon, and press the ✕ button.
• Some DVDs do not have a menu.
• Depending on the DVD, a menu may be referred to as
“DVD Menu”, “Title Menu” or “Titles” in the 5 Repeat steps 2 - 4 to set other 2 Use the directional buttons to
instructions supplied with the disc. titles or chapters. select “Clear all”, and press the
✕ button.
 17
To use Program Play with Shuffle Play or For details on Program Play and Repeat Play, Disc Repeat
GB
Repeat Play Playback in random order see “Playback in desired order (Program Play)” (Repeated playback of all titles)
(Shuffle Play)

DVD videos
• Program Play with Shuffle Play on page 16, or “Repeated playback (Repeat
During playback in Program Play mode, use The console will automatically select a random Play)” at right. Title Repeat
the directional buttons to select the order to play titles and chapters. Playback (Repeated playback of one title)
(Shuffle Play) icon, and press the ✕ button. order will be different each time Shuffle Play is To set Shuffle Play when a disc is not Chapter Repeat
Shuffle Play is turned on. used. playing (Repeated playback of one chapter)
When Shuffle Play is used with Program
Use the directional buttons to select the
Play, Shuffle Play options are limited to During playback, use the directional buttons to (Shuffle Play) icon, and press the ✕ button until Repeat Off
“Shuffle On” and “Shuffle Off”. select the (Shuffle Play) icon, and press the shuffle mode you want to set is displayed. (Clear Repeat Play)
• Program Play with Repeat Play the ✕ button. Use the directional buttons to select the N
During playback in Program Play mode, use The screen will display the following shuffle (Play) icon, and press the ✕ button. Shuffle
the directional buttons to select the modes in turn each time the ✕ button is To end Repeat Play
Play begins.
(Repeat) icon, and press the ✕ button. pressed. Shuffle Play will begin as soon as the Use the directional buttons to select the
Repeat Play is turned on. playback mode is selected. (Repeat) icon, and press the ✕ button until
Notes
When Repeat Play is used with Program “Repeat Off” is displayed.
• A-B Repeat is cleared when Shuffle Play is set.
Play, Repeat Play options are limited to Title Shuffle • Shuffle Play may not be available on some discs.
“Repeat On” and “Repeat Off”. (Playback of titles in random order) • Shuffle Play is cleared when:
For details on Shuffle Play and Repeat Play, see – A-B Repeat is set. To use Repeat Play with Program Play or
“Playback in random order (Shuffle Play)”, and – The DVD disc menu is displayed. Shuffle Play
Chapter Shuffle
“Repeated Playback (Repeat Play)” at right. – The disc tray is opened using the A button on the • Repeat Play with Program Play
(Playback of chapters in random order) console front. During playback in Repeat Play mode, use
– The console is reset or goes into standby mode after
Notes Shuffle Off the 1/reset button has been pressed.
the directional buttons to select the
• Program Play settings cannot be changed while playing
(Clear Shuffle Play) – The power is turned off using the main power (Program Play) icon, and press the ✕ button.
in Program Play mode. switch on the console rear. Make program selections and press the
• A-B Repeat is cleared when Program Play is set. • When Chapter Shuffle is selected, up to 200 chapters START button. Repeat Play is turned on.
• Program Play may not be available for some discs. To end Shuffle Play can be played in random order. If the disc has more
• Only the number of titles and chapters recorded in the
When Program Play is used with Repeat
Use the directional buttons to select the than 200 chapters, 200 chapters will be selected at
disc will be displayed on the screen. Play, Repeat Play options are limited to
random.
• Program Play is stopped when: (Shuffle Play) icon, and press the ✕ button until “Repeat On” and “Repeat Off”.
– A-B Repeat is set. “Shuffle Off” is displayed. • Repeat Play with Shuffle Play
– The DVD disc menu is displayed.
• Program Play settings are cleared when:
Repeated playback (Repeat During playback in Repeat Play mode, use
the directional buttons to select the
– The disc tray is opened using the A button on the To use Shuffle Play with Program Play or Play) (Shuffle Play) icon, and press the ✕ button.
console front. Repeat Play All of the titles on the DVD, or one title or
– The console is reset or goes into standby mode after • Shuffle Play with Program Play Repeat Play is turned on.
the 1/reset button has been pressed. chapter can be repeatedly played back using When Shuffle Play is used with Repeat Play,
When playing in Shuffle Play mode, use the Repeat Play.
– The power is turned off using the main power Repeat Play options are limited to “Repeat
switch on the console rear.
directional buttons to select the
(Program Play) icon, and press the ✕ button On” and “Repeat Off”.
During playback, press the directional buttons For details on Program Play and Shuffle Play,
to select program settings. Press the START to select the (Repeat) icon, and press the
button. Shuffle Play is turned on. see “Playback in desired order (Program Play)”
✕ button. on page 16, or “Playback in random order
When Program Play is used with Shuffle The screen will display the following repeat
Play, Shuffle Play options are limited to (Shuffle Play)” on page 17.
modes in turn each time the ✕ button is
“Shuffle On” and “Shuffle Off”. pressed. Repeat Play will begin as soon as the
• Shuffle Play with Repeat Play repeat playback mode is selected. To set Repeat Play when a disc is not
When playing in Shuffle Play mode, use the playing
directional buttons to select the Use the directional buttons to select the
(Repeat) icon, and press the ✕ button. Repeat (Repeat) icon, and press the ✕ button until the
Play is turned on. Repeat mode you want is displayed. Use the
When Repeat Play is used with Shuffle Play, directional buttons to select the N (Play) icon,
Repeat Play options are limited to “Repeat and press the ✕ button. Repeat Play begins.
On” and “Repeat Off”.
18 Playing a DVD video (continued)

Notes • When A-B Repeat is set, Program Play, Shuffle Play,

• A-B Repeat is cleared when Repeat Play is set. and Repeat Play are cleared.
• Repeat Play may not be available on some discs.
• Repeat Play is cleared when:
– A-B Repeat is set. Selecting Original/Play List for
– The disc tray is opened using the A button on the
console front.
DVD-RW playback
– The console is reset or goes into standby mode after DVD-RW discs (VR mode) can play back both
the 1/reset button has been pressed. original content recorded using a DVD
– The power is turned off using the main power recorder, and Play List content created by
switch on the console rear.
editing original content. When using this kind
of disc you can select the type of title you want
Repeated playback of a to play.

selected scene (A-B Repeat) This setting is not available during Resume
Play.
You can set a specific section of the disc to be
repeatedly played back.
Stop playback, and use the directional buttons
1 During playback, use the to select the (Original/Play List) icon.
Then press the ✕ button.
directional buttons to select the Original and Play List will be selected in turn
(A-B Repeat) icon, and press each time you press the ✕ button.
the ✕ button at the point you •Original: Playback of originally recorded
content.
want to start repeated playback. •Play List: Playback of edited content.
The starting point (point A) is set.
Notes
2 Use the directional buttons to • The default setting for this option is Play List.
select the (A-B Repeat) icon, • Note that you cannot record or edit content using this
console.
and press the ✕ button at the • If a disc has no Play List, the original content will be
point you want to end repeated played back. Play List cannot be selected.
• A-B Repeat cannot be set to select a section of video
playback. from more than one title.
The ending point (point B) is set, and • Slow-motion play (in reverse) is not available for DVD-
RW discs (VR mode).
repeated playback of the section from • The “Original” setting is cleared when:
A to B begins. – The disc tray is opened using the A button on the
console front.
Notes – The console is reset or goes into standby mode after
• A-B Repeat Play may not be available on some discs or the 1/reset button has been pressed.
some sections of a disc. – The power is turned off using the main power
• The A-B Repeat function can be set for only one section switch on the console rear.
at a time. • Content recorded on DVD-RW discs in VR mode must
• A-B Repeat cannot be set to select a section of video be finalized to be viewed on the PlayStation®2 console.
from more than one title.
• A-B Repeat is cleared when:
– Program Play, Shuffle Play, or Repeat Play has been
set
– Playback has been stopped.
– The DVD disc menu is displayed.
– The disc tray is opened using the A button on the
console front.
– The console is reset or goes into standby mode after
the 1/reset button has been pressed.
– The power is turned off using the main power
switch on the console rear.
 Settings and adjustments for the DVD player 19
You can use the Control Panel to navigate the Notes
• The number of angles varies depending on the disc and Selecting a specific scene for Displaying playback GB
DVD and adjust DVD player settings.
the scene. For any given scene you can choose from
playback information

DVD videos
Note that not all functions are available on all
among the angles recorded for that scene.
DVD discs. • Due to the programming on some DVDs, you may not You can select a specific scene for playback by You can display information such as the
be able to change angles even if multiple angles are specifying the title or chapter number, or by current title or chapter number, or the elapsed
recorded on the DVD. entering the elapsed time for the starting point or remaining time on a disc. When Program
Changing the audio language of the scene that you want to play. Play or Shuffle Play modes are set, this
Some DVDs are recorded with audio tracks for information will also be displayed in the top
multiple languages (multilingual tracks). When Displaying subtitles right corner of the screen.
you play such DVDs you can select the If subtitles are recorded on a DVD, you can Selecting a scene by chapter number
language you want to hear during playback. turn the subtitles on and off during playback. During playback, use the directional buttons to
During playback or when the disc is paused,
The languages you can select may vary When multilingual subtitles are available, you select the desired chapter number, and press
use the directional buttons to select the
depending on the DVD. can also change the subtitle language. the ✕ button.
(Time Display) icon, and press the ✕ button.
Playback of the selected chapter begins.
The display changes as shown below, each time
Use the directional buttons to select the you press the ✕ button.
Use the directional buttons to select the
(Audio Options) icon, and press the ✕ button. Selecting a scene by title number,
(Subtitle Options) icon, and press the ✕ button.
The language changes each time you press the
The subtitle language changes each time you chapter number, or by specifying the Title X Chapter X
✕ button. time.
press the ✕ button. The subtitle languages you (Title number and chapter number)
Using the analog controller can select will vary depending on the DVD.
1 During playback, use the Title X Chapter X C XX:XX:XX
(DUALSHOCK®2) directional buttons to select the (Elapsed time of current chapter)
To turn the subtitles off
Press the R3 button.
Use the directional buttons to select the (Go To) icon, and press the ✕
The language changes each time you press the Title X Chapter X C -XX:XX:XX
R3 button. icon, and press the ✕ button until “Subtitles button. (Remaining time of current chapter)
Off” is displayed.
Notes 2 Use the directional buttons to Title X Chapter X T XX:XX:XX
• Due to the programming on some DVDs, you may not
Using the analog controller select an item, and press the ✕ (Elapsed time of current title)
be able to change languages even if multilingual tracks
are recorded on the DVD. (DUALSHOCK®2) button.
• When playing a DVD, the audio settings may change • Title = Title number Title X Chapter X T -XX:XX:XX
when you change titles.
Press the L3 button. (Remaining time of current title)
The subtitle language changes each time you • Chapter = Chapter number
• When you set the “DTS” option of “Audio Digital Out”
press the L3 button. The subtitle languages you • C XX:XX:XX (or T XX:XX:XX)
to “Off” under “Audio Setup” in the Setup display, the Note
sound recording system will not be set to DTS even can select will vary depending on the DVD. = Elapsed time for the chapter
You cannot display the remaining time for some titles.
when playing a DVD with DTS sound recorded. (or title)
To turn the subtitle language off
Press the L3 button until “Subtitles Off” is Displaying the list of direct
Changing the viewing angle displayed. 3 Use the directional buttons to
button functions (Help)
With DVDs on which multiple angles (multi- select the playback point, and
Notes You can display a list that shows the function
angles) are recorded, you can change the
• When playing a DVD on which no subtitles are press the ✕ button. of each button on the analog controller
viewing angle on scenes for which multiple
recorded, no subtitles can be displayed. Playback of the selected scene begins. (DUALSHOCK®2).
angles are available. For example, while • Due to the programming on some DVDs, you may not
playing the scene of a train in motion, you can be able to display subtitles or switch among subtitle
change the view from the front of the train, the languages even if subtitles are recorded on the DVD. Note Use the directional buttons to select the
left window, or the right window, without • Depending on the DVD, you may not be able to turn You cannot select a scene by specifying the remaining time (Help) icon, and press the ✕ button.
the subtitles off. of the chapter or title (only elapsed time can be used). The list of button functions is displayed.
interrupting the movement of the train.
• The type and number of languages for subtitles varies The display is turned on and off each time you
from disc to disc. press the ✕ button.
Use the directional buttons to select the • While playing a DVD, the subtitle setting may change
(Angle Options) icon, and press the ✕ button. when you change titles.
The angle changes each time you press the ✕
button.
20 Settings and adjustments for the DVD player (continued)

Using the analog controller After using the Setup display

Finding a particular point on a (DUALSHOCK®2)
Using the Setup display To save changes made during playback, you
disc (Search) You can change the initial settings, adjust the must stop playback* or eject the DVD before
You can use the Search function to quickly 1 During playback, press and hold picture and sound, and set various other
output options using the Setup display. You
pressing the 1 (standby)/reset button on the
console front or turning off the console using
locate a particular point on a DVD. You can down the L2 or R2 button to
search either forward or backward and can can also select a language for subtitles and the main power switch on the console rear.
switch between 3 speeds and slow-motion begin searching. Press the menus, restrict playback by children, and so on. Note that changes will not be saved if you reset
playback speed. This function is also available directional buttons to change For details on the Setup display, see pages 21- or turn off the console before stopping
25. playback, or without first ejecting the DVD.
using the analog controller (DUALSHOCK®2) speeds while searching. * Stopping playback during Resume Play is included.
when the Control Panel is not displayed. Before using the Setup display
Search speed changes as shown below
Some menu items cannot be selected during
1 During playback, use the when you press the directional
Resume Play as noted on the pages that follow.
directional buttons to select the buttons while holding down the L2 or For details on clearing Resume Play see “To
R2 button.
(Search, Fast Reverse) or clear Resume Play” on page 16.
(Search, Fast Forward) icon. Then Search 3
press and hold down the ✕ 1 Use the directional buttons to
Search 2 select the (Setup) icon, and
button to begin searching. Press
the directional buttons to change Search 1 press the ✕ button.
speeds while searching. The Setup icon bar is displayed, giving
Search speed changes as shown below Slow you the access to the menus shown on
when you press the directional page 21.
buttons while holding down the ✕ 2 Release the L2 or R2 button 2 Use the directional buttons to
button. when you reach the point you are select the icon for the setting you
Search 3 searching for. would like to change, and press
Playback returns to normal speed. the ✕ button.
Search 2
Note The menu for the icon selected is
Search 1 This function may not be available on some DVDs. displayed.

Slow
3 Use the directional buttons to
Playing in slow-motion choose a menu item, and press
During playback, use the directional buttons to the ✕ button.
2 Release the ✕ button when you select the (Slow Backward) or (Slow
The options for the menu item selected
Forward) icon, and press the ✕ button.
reach the point you are searching are displayed.
Slow-motion playback begins.
for.
Playback returns to normal speed.
To end slow-motion playback 4 Use the directional buttons to
Use the directional buttons to select the N select an option, and press the ✕
(Play) icon, and press the ✕ button.
Playback returns to normal speed. button.
The option selected is set.
 21

Setup display menus Setting language options GB

(Language Setup)

DVD videos
The Setup display menus are organized as shown below. The default settings are underlined.
“Language Setup” allows you to choose from
among various languages for the on-screen
Language Setup (pages 21-22) Screen Setup (page 22) Audio Setup (pages 24-25)
display (OSD), DVD audio, and other items.
The default setting for each menu item is
OSD English TV Type 16:9 Audio Digital Out
underlined in the explanations below.
Traditional Chinese 4:3 Letter Box
DIGITAL OUT (OPTICAL) On
Select the (Language Setup) icon in the Setup
Menu English 4:3 PAN SCAN
Off display. For details, see “Using the Setup
French DNR Off Dolby Digital On display” on page 20.
German DNR1 Off Notes
Italian DNR2 DTS On • When you select a language that is not recorded on the
Spanish +2 DVD, one of the recorded languages is automatically
Outline Sharpening Off
Dutch selected for the “Menu,” “Audio” and “Subtitles”
+1 MPEG On
Danish settings.
0 • Depending on the DVD, the language you have
Swedish Off
–1 selected for the “Menu,” “Audio” or “Subtitles” may
Finnish not be used.
–2 Audio Track Auto Select Mode On
Norwegian
Portuguese Display On Off x OSD
Russian Off +2 Selects the language for the on-screen display.
DVD Volume
Chinese Progressive On • English
+1
Japanese Off • Traditional Chinese
Standard
Korean
Language Options , x Menu
Custom Setup (pages 23-24)
Selects the language for the DVD disc menu.
Audio (same as Menu)
This setting is not available during Resume
Subtitles English Pause Mode Auto
Play.
French Frame
• English
German • French
Parental Control Region USA
Italian • German
Other (see page 24)
Spanish • Italian
Dutch Level Off • Spanish
Danish 8 • Dutch
Swedish 7 • Danish
Finnish 6 • Swedish
Norwegian 5 • Finnish
Portuguese 4
• Norwegian
Russian • Portuguese
3
Chinese • Russian
2
Japanese • Chinese
1 • Japanese
Korean
Change Password • Korean
Audio Follow
• Language Options*
Language Options ,
* When you select “Language Options,” you can choose
from an extensive list of languages.
22 Settings and adjustments for the DVD player (continued)

x Audio x DNR (Digital Noise Reduction) Notes

Selects the language for the audio track. Setting TV display options This setting may help reduce roughness in the • To use progressive scan you must have a TV that
This setting is not available during Resume (Screen Setup) on-screen image and produce a cleaner picture. supports progressive scan (480p) and you must connect
your console using the SCPH-10100 G component AV
Play. You can set the aspect ratio and other display • Off: Normally select this position. cable (for PlayStation®2), which is sold separately.
• English options for the connected TV using this setting. • DNR1: Increases picture clarity • If you set “Progressive” to “On” without the necessary
• French The default setting for each menu is underlined • DNR2: Increases picture clarity (maximum). equipment, picture quality may be reduced, or the
picture may not be displayed.
• German in the explanations below.
Notes • If you accidentally set this option to “On” and need to
• Italian Select the (Screen Setup) icon in the Setup clear the setting, with the DVD inserted in the console
• DNR2 is more effective for reducing image roughness
• Spanish display. For details, see “Using the Setup than DNR1, but in some cases an afterimage may press the 1 (standby)/reset button on the console
• Dutch display” on page 20. appear. If this occurs, select “Off.” front. Then hold down the START button of the analog
• Danish • The DNR function may produce limited results on controller (DUALSHOCK®2) inserted into controller
some DVDs. port 1 until the DVD picture is displayed. When DVD
• Swedish
x TV Type • When “Progressive” is set to “On”, DNR is playback begins, “Progressive” will be set to “Off”,
• Finnish allowing the DVD video to be displayed as normal.
Sets the aspect ratio of the TV. automatically turned off and cannot be turned on.
• Norwegian “Progressive” can also be set to “Off” in the Version
• Portuguese This setting is not available during Resume Information screen. See page 9 for details.
• Russian Play. x Outline Sharpening • Progressive scan is not available when playing a DVD-
• Chinese You can sharpen or soften the outline of the on- RW disc with content recorded in VR mode.
• 16:9: Select this option when using a wide- • DVDs can contain video based material and film based
• Japanese screen image using this setting. The higher the
screen TV, or a standard TV that displays in material, which use different frame rates. When playing
• Korean value, the sharper the outline. video based material using progressive scan, some
• Language Options* wide mode. • +2 video images may appear unnatural. This is due to an
* When you select "Language Options," you can choose • 4:3 Letter Box: Select this option when using • +1 image conversion process. If this occurs, set
from an extensive list of languages. a standard TV. This setting displays a wide • 0: Normally select this position. “Progressive” to “Off” and view in standard interlace
picture with margins on the upper and lower • -1 mode.
portions of the screen. • -2
x Subtitle
• 4:3 PAN SCAN: Select this option when
Selects the language for the subtitles.
using a standard TV. This setting displays a Setting viewer options
This setting is not available during Resume x Display
Play.
wide picture adjusted to the height of the (Custom Setup)
screen, cutting off the portions at left and You can display or turn off playback status
• English You can set the Parental Control level and
right that do not fit. information in the top right corner of the
• French adjust other playback features using Custom
screen.
• German 16:9 Setup.
• On: When playing a DVD, the playback
• Italian The default setting for each menu is underlined
status information is displayed for a few
• Spanish in the explanations below.
seconds.
• Dutch • Off: Playback status information is not Select the (Custom Setup) icon in the Setup
• Danish displayed. display. For details see “Using the Setup
• Swedish 4:3 Letter Box display” on page 20.
• Finnish
x Progressive
• Norwegian
This method of displaying a picture updates all x Pause Mode
• Portuguese
the lines in one pass, resulting in most cases in Sets the picture status in pause mode.
• Russian
a more stable, clearer, flicker-free image than • Auto: A picture with a lot of moving
• Chinese
4:3 PAN SCAN standard interlace mode. elements can be displayed without jitter.
• Japanese
This setting is not available during Resume Normally select this position.
• Korean
Play. • Frame: A picture without a lot of moving
• Audio Follow*1
• Language Options*2 • On: Select this when the console is connected elements can be displayed in high resolution.
*1 When you select “Audio Follow,” the language for to a TV that supports progressive scan (480p).
subtitles automatically changes to match the language • Off: Select this when the console is connected
you have selected for the audio track. Notes to a normal TV.
*2 When you select “Language Options,” you can choose • Some DVDs may automatically set the aspect ratio of
from an extensive list of languages. the TV.
• When “Progressive” is set to “On”, the aspect ratio of
the TV is set to 16:9 and cannot be changed.
 23
x Parental Control 2 Use the directional buttons to 4 Use the directional buttons to 6 Use the directional buttons to GB
The viewing of some DVD content may be
select a number, and press the ✕ select the region to base select a restriction level, and

DVD videos
restricted based on viewer age or other factors
in some regions. You can use the Parental button. Parental Control levels on, and press the ✕ button.
Control feature to restrict the level of content Repeat this step to enter a four-digit press the ✕ button. Parental Control is set.
that may be viewed on your console. password. If you select “Other”, refer to the The lower the value, the stricter the
This setting is not available during Resume The screen for setting the region, restriction.
“Region code list” at right for the
Play. Parental Control level, and for region code to select.
changing your password is displayed. Use the directional buttons to select
the first letter, and press the right
Setting Parental Control directional button. Use the directional
Select the (Custom Setup) icon in the Setup buttons to select the second letter, and
display. press the ✕ button.
1 Use the directional buttons to
select “Parental Control”, and
press the ✕ button. Region code list

If you have not registered a password 3 Use the directional buttons to Region Code Region Code
The screen for registering a password select “Region”, and press the ✕ United Kingdom GB China CN
is displayed. button. Italy IT Denmark DK

5 Use the directional buttons to

Indonesia
Austria
ID
AT
Germany
Japan
DE
JP
select “Level”, and press the ✕
Netherlands NL Norway NO
button.
Canada CA Philippines PH
The list of level options is displayed.
Korea KR Finland FI
Singapore SG France FR
If a password has already been Switzerland CH Belgium BE
registered Sweden SE Hong Kong HK
The screen for confirming the
Spain ES Malaysia MY
password is displayed.
Thailand TH Russia RU
Taiwan TW
24 Settings and adjustments for the DVD player (continued)

To change your password If you forget your password x Dolby Digital

Setting sound options Selects the Dolby Digital signal to be output
1 In step 2 under “Setting Parental 1 Press the SELECT button when (Audio Setup) through the DIGITAL OUT (OPTICAL)
Control” use the directional the screen for confirming the You can adjust your audio settings based on connector.
the playback conditions or the equipment in • On: Select this option when the console is
buttons to select “Change password is displayed. connected to an audio device with a built-in
use.
Password”, and press the ✕ The screen for deleting the password The default setting for each menu is underlined Dolby Digital decoder.
button. is displayed. in the explanations below. For details see If the console is connected to an audio device
without a built-in Dolby Digital decoder, do
The screen for changing the password 2 Use the directional buttons to
“Using the Setup display” on page 20.
not turn this option on. If you select this
is displayed. Select the (Audio Setup) icon in the Setup
select a number, and press the ✕ display.
option by mistake, when you play a Dolby
2 Use the directional buttons to button. Digital audio track, a loud noise (or no
sound) will come out from the speakers,
select a number, and press the ✕ Repeat this procedure to enter the x Audio Digital Out possibly hurting your ears or damaging the
button. four-digit number “7444”. The current You can switch the methods of outputting speakers.
Repeat this step to enter a four-digit password is deleted and the screen for audio signal when you connect the following • Off: Select this option when the console is
registering a new password is audio devices to the DIGITAL OUT (OPTICAL) connected to an audio device without a built-
password. To confirm your password,
displayed. connector on the PlayStation®2 console rear in Dolby Digital decoder.
enter it once again. The password is
using an optical digital cable (sold separately).
changed. 3 Follow step 2 in “Setting • A digital device such as a receiver (amplifier) x DTS
Parental Control”, to register a with a digital connector. Selects the DTS signal to be output through the
Playing a disc which is restricted • An audio device with a built-in Dolby Digital
new password. DIGITAL OUT (OPTICAL) connector when
DTS or MPEG decoder.
by Parental Control • A DAT (Digital Audio Tape) or MD
you connect to the console with an optical
Notes digital cable (sold separately).
1 Insert the disc. • If you play a DVD that does not have the Parental
(MiniDisc) deck. For connection details, see
page 7.
This setting is not available during Resume
Control function, playback will not be restricted even if Play.
Playback begins automatically, and at you set a playback restriction level on your console. • On: Select this option when the console is
the point where Parental Control is • If you do not set a password, you cannot change the connected to an audio device with a built-in
x DIGITAL OUT (OPTICAL)
set, the screen changes to a display Parental Control settings.
DTS decoder.
• Some DVDs may require you to enter only the Selects whether to output signal through the
requesting confirmation to DIGITAL OUT (OPTICAL) connector. If the console is connected to an audio device
password without changing the Parental Control level.
temporarily change the Parental • Program Play, Shuffle Play, Repeat Play, and A-B • On: Select this when you connect with an without a built-in DTS decoder, do not turn
Control level. Repeat may not be available on some DVDs with the optical digital cable (sold separately). this option on. If you select this option by
Parental Control feature. mistake, when you play a DTS audio track, a
2 Use the directional buttons to
Normally select this option.
If you select “On”, make the appropriate loud noise (or no sound) will come out from
select “Yes”, and press the ✕ To clear Parental Control settings for “Dolby Digital” “DTS” and the speakers, possibly hurting your ears or
button. With DVD playback stopped, go to step 6 in “MPEG”. damaging the speakers.
“Setting Parental Control” and set “Level” to • Off: Select this when you do not want sound • Off: Select this option when the console is
The screen for confirming the connected to an audio device without a built-
“Off”. (audio signal) to be output through the
password is displayed. DIGITAL OUT (OPTICAL) connector. in DTS decoder.
This setting cannot be cleared during Resume
3 Use the directional buttons to Play.
Note
select a number, and press the ✕ If you select “Off”, you cannot set “Dolby Digital” “DTS”
button. Repeat this procedure to or “MPEG”.

enter the four-digit password.

Playback begins.
When DVD playback is stopped, the
Parental Control level returns to the
original setting.
 25
x MPEG x DVD Volume GB
Selects the MPEG AUDIO signals to be output If the audio output level of the DVD is low, you

DVD videos
via the DIGITAL OUT (OPTICAL) connector. can turn up the volume of the DVD. DIGITAL
• On : when the console is connected to audio OUT (OPTICAL) must be set to “Off” to change
equipment with a built-in MPEG decoder. this setting.
If the console is connected to audio • +2: Turns up the volume (maximum).
equipment without a built-in MPEG decoder, • +1: Turns up the volume.
do not turn this option on. Otherwise, when • Standard: Original audio volume. Normally
you play the MPEG sound track, a loud noise select this position.
(or no sound) will come out from the
speakers, possibly hurting your ears or Note
damaging the speakers. If you set this option to “+1” or “+2”, the sound may be
• Off : when the console is connected to audio distorted in places where loud sound is present. If the
sound becomes distorted, select "Standard".
equipment without a built-in MPEG decoder.
Caution
x Audio Track Auto Select Mode If you turn up the volume too high, your ears may be
Gives the audio track that contains the highest injured or the speakers may be damaged.

number of channels priority when you play a

DVD on which multiple audio formats (PCM,
Dolby Digital DTS or MPEG AUDIO format)
are recorded.
This setting is not available during Resume
Play.
• On: Priority given
• Off: No priority given

Notes
• If you set this item to “On,” the language may change
because the “Audio Track Auto Select Mode” setting
has higher priority than the “Audio” settings in
“Language Setup” (page 21).
• If you set “DIGITAL OUT (OPTICAL)” to “On” and
“DTS” to “Off” in “Audio Setup”, the DTS audio track
is not played even if you set this item to “On” and the
highest-numbered audio channel is recorded in DTS
format.
• If PCM, DTS Dolby Digital and MPEG AUDIO audio
tracks have the same number of channels, the console
selects PCM, Dolby Digital DTS and MPEG AUDIO
audio tracks in this order.
• Depending on the DVD, the audio channel with
priority may be predetermined. In this case, you cannot This product incorporates copyright protection
give priority to the DTS Dolby Digital or MPEG
technology that is protected by method claims
AUDIO format by selecting “On”.
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
26 Troubleshooting
, DVD playback has been stopped. , Some video images appear unnatural when , Check that you have connected the console
, Try another set of AV cables . using progressive scan, even when the TV to the audio input connectors on the receiver
, The progressive scan option is set to “On” supports progressive mode. (amplifier) correctly. Refer also to the
when using a TV that does not support Set “Progressive” to “Off”, and view in instructions supplied with your amplifier.
Please go through this progressive scan (480p), or when using a standard interlace mode. , Try another set of AV cables.
section if you experience cable other than the component AV cable , Check the speaker connections and
(for PlayStation®2). settings. Refer also to the instructions
difficulty in operating the With the DVD inserted in the console, press
The aspect ratio cannot be changed
supplied with your amplifier.
according to the TV when playing wide
PlayStation®2 console. the 1 (standby)/reset button on the
picture DVD videos.
, Check that you have selected the
console front. Then hold down the START appropriate input on the receiver
, Depending on the disc, the aspect ratio is
• If you experience any of the following button of the analog controller (amplifier) so that you can listen to sound
fixed.
difficulties, use this troubleshooting (DUALSHOCK®2) inserted into controller from the console. Refer also to the
, Check that the console is connected to the
guide to help remedy the problem before port 1 until the DVD picture is displayed. instructions supplied with your amplifier.
TV directly. (The selector or receiver
requesting repair. Should any problem When DVD playback begins, “Progressive” , The console is in pause mode.
(amplifier) may be connected between the
persist, call the PlayStation® service line will be set to “Off”, allowing the DVD , The console is in search/slow-motion mode
console and the TV.)
number listed on your warranty card for video to be displayed as normal. (when playing a DVD video).
, Depending on the TV, the aspect ratio is
technical assistance. “Progressive” can also be set to “Off” in the , You are playing an audio CD or DVD with
fixed.
Version Information screen (page 9). a DTS audio track.
• Make sure the AC power cord is When playing a DVD-RW disc recorded in VR Do not play back DTS audio tracks when
connected to the console and the wall Picture noise appears. mode, the message “Playback is restricted. the console is connected to an audio device
outlet, and the TV (or VCR) or the , The console is placed on an unstable Cannot play.” is displayed on the screen and without a built-in DTS decoder (see page
supplied accessories are connected to the surface. Place the console on a stable and then the screen turns blue. 24).
console correctly. flat surface. Do not shake or vibrate the , You may be playing a disc that contains , The system setting is not correct for when
console. “copy-once” content. Video recorded on the console is connected to audio
, Clean the disc. CPRM-compatible DVD-RW discs using equipment with DIGITAL OUT (OPTICAL)
Power , Moisture has condensed inside the console the copy-once feature cannot be played connectors (see page 7).
(see page 2). back. For details, see “Notes on the
The power is not turned on.
, If the video signal from the console has to playback of DVD-R/DVD-RW/DVD+R/
, Check that the AC power cord is connected Poor sound quality.
go through the VCR to get to the TV, the DVD+RW discs” on page 3.
securely. , The console is placed on an unstable surface.
copy protection applied to some DVD
, The console is not turned on. Turn on the Place the console on a stable and flat surface.
videos could affect picture quality. When
console using the main power switch on
the console rear.
playing a DVD video, connect the console Sound Do not shake or vibrate the console.
to the TV directly (see page 6). , Clean the disc.
, The progressive scan option is set to “On”
There is no sound. , Moisture has condensed on the disc
, Check that the console is connected to the (see page 2).
Picture when using a TV that does not support
TV (or VCR) with the AV cable (integrated , You are playing an audio CD or a DVD
progressive scan (480p), or when using a
There is no picture. audio/video). with DTS audio tracks.
cable other than the component AV cable
, Check that the console is connected to the , Check that the console and the TV (or VCR) You can play an audio CD or DVD with
(for PlayStation®2).
TV (or VCR) with the AV cable (integrated Do not open the disc tray or remove the are turned on. DTS audio tracks only when the console is
audio/video). , Check that you have selected the video connected to audio equipment with a built-
DVD. With the DVD inserted in the
, Check that the console and the TV (or input on the TV (or VCR). in DTS decoder.
console, press the 1 (standby)/reset button
VCR) are turned on. on the console front. Then hold down the , Check that the TV volume is set properly or
, Check that you have selected the video “mute” is not selected on the TV.
START button of the analog controller The surround effect is difficult to hear when
input on the TV (or VCR). , Check that the AV cable (integrated audio/
(DUALSHOCK®2) inserted into controller you are playing a DVD video with a Dolby
, Check that the AV cable (integrated audio/ port 1 until the DVD picture is displayed. video) is connected securely.
Digital audio track.
video) is connected securely. , Check that the inserted disc can be played
When DVD playback begins, “Progressive” , Check the speaker connections and settings.
, Check that the inserted disc can be played with this console (see page 3).
will be set to “Off”, allowing the DVD Refer to the operating manual of your
with this console (see page 3). video to be displayed as normal. , Check that the disc is placed with the label
receiver (amplifier).
, Check that the disc is placed with the label side facing up (data side down).
“Progressive” can also be set to “Off” in the
side facing up (data side down). Version Information screen (page 9).
, The disc is not inserted correctly.
 27
, Depending on the DVD, the output signal , Check that there are empty blocks/free Playback stops automatically. GB
may not comprise the entire 5.1 channel space on the memory card (8MB) (for , The disc may contain an auto pause signal.

Additional information
range. It may be monaural or stereo even if PlayStation®2) or memory card. While playing such a disc, the console stops
the audio track is recorded in Dolby Digital. , Try another memory card (8MB) (for playback at the signal.
PlayStation®2) or memory card.
The sound comes from the center speaker The console does not function properly. You cannot perform some functions such as
only. , Static electricity, etc. may affect the Stop, Search, Slow-motion Play, Program
, Depending on the disc, the sound may console’s operation. Play, Shuffle Play or Repeat Play.
come from the center speaker only. Turn off the main power switch and then , Depending on the disc, you may not be
turn it back on. able to do some of the operations above.

Operation 1 indicator flashes in red and the console

The language for the audio track cannot be
does not work.
The controller does not function. changed.
, A flashing red light indicates a console
, Check that the controller is connected to the , Multilingual tracks are not recorded on the
“fault” condition and the unit will not
console. DVD.
operate. Remove any obstructions from the
, Check that the analog controller , Changing the language for the track is
vents to allow the console to cool down.
(DUALSHOCK®2) is set to the appropriate prohibited on the DVD.
Resume play after the console returns to
mode for the software (see page 11).
standby mode.
, Try another set of controllers.
The subtitle language cannot be changed.
, Try setting the “Remote Control” setting of
, Multilingual subtitles are not recorded on
the System Configuration menu to The disc tray does not open.
the DVD.
“Gameplay Function Off”. , Check that the AC power cord is connected
, Changing the language for the subtitles is
Some unlicensed 3rd party peripherals may securely.
prohibited on the DVD.
not operate with “Gameplay Function” set , Check that the console is turned on.
to “On”. Note that use of such peripherals Turn on the console using the main power The subtitles cannot be turned off.
is not recommended and will void your switch on the back of the console. , Depending on the DVD, you may not be
warranty. able to turn the subtitles off.

The software title does not start.

The angles cannot be changed when you
, Check that the inserted disc can be played DVD video operation play a DVD.
with this console (see page 3).
The console does not play from the , Multi-angles are not recorded on the DVD.
, Check that the disc is placed with the label
beginning when playing a disc. , Changing the angles is prohibited on the
side facing up (data side down).
, Resume Play has been selected. DVD.
, Check that the disc is inserted correctly.
, Clean the disc. Select the x (Stop) icon and press the ✕ The icon cannot be selected.
, Moisture has condensed on the disc (see button twice before you start playing (see , Insert a DVD-RW (VR mode) disc in the
page 2). page 16). console (see page 18).
, Try another copy of the disc. , Depending on the disc, the DVD disc menu
, Check that the DVD-R or DVD-RW you are is automatically displayed.
playing has been finalized.
The disc does not play even if the DVD title
You cannot save data on the memory card
is selected.
(8MB) (for PlayStation®2) or memory card.
, A Parental Control level has been set on the
, Check that the memory card (8MB) (for
disc (see page 23).
PlayStation®2) or memory card is inserted
securely.
, Check that you are playing the game
correctly.
Refer to the appropriate software manual.
28 Specifications Glossary
General Optional accessories Chapter (page 19) •VR (Video Recording) mode - enables various
Power requirements SCPH-10010 G Analog Controller Sections of a movie or a music piece on a DVD programming and editing functions, some of
110 V AC, 50/60 Hz (DUALSHOCK®2)
that are smaller than titles. A title is composed which are not available in Video mode.
Power consumption SCPH-10020 G Memory Card (8MB)
of several chapters. Each chapter is assigned a
47 W (for PlayStation®2) DVD+RW
Console dimensions (approx.) SCPH-10040 G Vertical Stand chapter number enabling you to locate the
DVD+RW (read “plus RW”) is a recordable and
301 × 78 × 182 mm (w/h/d) (for PlayStation®2) chapter you want.
rewritable disc. DVD+RW discs use a recording
Console weight (approx.) SCPH-10060 G S VIDEO Cable
2.0 kg SCPH-10090 G Multitap Dolby Digital (page 7, 24) format that is comparable to the DVD VIDEO
Operating temperature (for PlayStation®2) Digital audio compression technology format.
5˚C - 35˚C SCPH-10100 G Component AV Cable developed by Dolby Laboratories. This
DVD material
Laser diode properties (for PlayStation®2) technology conforms to 5.1-channel surround
• Material: GaAlAs SCPH-10110 G Horizontal Stand DVD material can be divided into two types:
sound. The rear channel is stereo and there is a
• Wavelength: l=650/780 nm (for PlayStation®2) video based material and film based material.
discrete subwoofer channel in this format.
SCPH-10420 G DVD Remote Control Video based material is recorded at 30 frames
Inputs/outputs on the console front (for PlayStation®2) Dolby Digital provides the same 5.1 discrete
(60 fields) per second, and is normally used for
Controller port (2) SCPH-1020 HI Memory Card channels of high quality digital audio found in
TV programs. Film based material is recorded
Memory card slot (2) SCPH-110 Analog Controller Dolby Digital cinema audio systems. Good
(DUALSHOCK®)
at 24 video images per second, and is used for
USB connector (2) channel separation is realized because all of the
most movies. Some DVDs contain both video
channel data is recorded discretely and
Inputs/outputs on the console rear Design and specifications are subject to change without based and film based material.
notice.
processed in digital.
AV MULTI OUT connector (1)
MPEG AUDIO (page 25)
DIGITAL OUT (OPTICAL) connector (1) DTS (page 7, 24)
Expansion bay (1) International standard coding system to
Digital audio compression technology that
compress audio digital signals authorised by
Digital Theater Systems, Inc. developed. This
Supplied accessories ISO/IEO.
See page 4. technology conforms to 5.1-channel surround
sound. The rear channel is stereo and there is a Parental Control (page 23)
discrete subwoofer channel in this format. DTS A function of the DVD used to restrict playback
provides the same 5.1 discrete channels of high of the disc according to the age of the user and
quality digital audio. Good channel separation the restriction level in each country. The
is realized because all of the channel data is restriction varies from disc to disc; when it is
recorded discretely and processed in digital. activated, playback can be completely
prohibited, violent scenes are skipped or
DVD-VIDEO (page 3, 15)
replaced with other scenes, and so on.
DVD VIDEO discs can contain up to 8 hours of
moving pictures on a disc with the same Progressive scan
diameter as a CD. The picture data uses the Compared to standard interlace mode that
MPEG 2 format, one of the worldwide alternatively shows every other line of an
standards of digital compression technology. image to create one frame, progressive scan
Audio data is recorded in a multi-channel shows the entire image at once as a single
format allowing you to enjoy a more real audio frame. This means that while interlace mode
presence. DVD VIDEO discs also can contain can show 30 frames per second, progressive
advanced functions such as multiple viewing scan can show 60. The overall picture quality
angles, multilingual tracks and Parental increases and still images, text and horizontal
Control playback restrictions. lines appear sharper.
DVD-RW Title (page 19)
DVD-RW is a recordable and rewritable disc The longest section of a movie or a music piece
that is the same size as a DVD VIDEO disc. on a DVD; a movie, etc., for a picture piece on
DVD-RW discs have two modes: VR mode and video software; or an album, etc., for a music
Video mode. piece on audio software. Each title is assigned
• Video mode - complies with DVD-VIDEO a title number enabling you to locate the title
format and is compatible with most DVD you want.
players once finalized, whereas a DVD-RW
recorded in VR mode can only be played on
DVD-RW compliant DVD players.
 WARRANTY 29
Refer to the enclosed document regarding warranty that is country/area-specific.
GB

Additional information
2 警告 使用前須知事項
關於安全 請勿將主機放置於充滿香煙煙霧或煙灰的地方
為了避免發生火災或觸電﹐請勿讓本機淋雨或放 本產品是在充分重視安全性能的情況下設計的-但如果使用 設置主機時﹐請避免將其放在有過多香煙煙霧或煙灰聚集的
在潮濕的地方- 不當﹐任何電器產品都有可能引起火災､觸電或人身傷害的 地方-殘留在透鏡等內部零件上的香煙煙霧或煙灰可能會導
潛在危險-為確保安全操作﹐請遵循以下各項規則： 致主機發生故障-
為了避免發生火災或觸電﹐請勿將倒入液體的容
• 查閱所有警告條文､注意事項及使用說明-
器放置於主機上- • 如果裝置出現動作不正常﹐或者發出異常聲音或氣味時﹐
清潔通風孔
為了避免觸電﹐請勿擅自打開機殼-維修應委託 請立即停止使用- 灰塵容易聚集在 PlayStation2 主機的前後通風孔-請經
• 如果裝置發生故障﹐請打電話給保證書上記載的消費者服 常檢查通風孔﹐並使用低功率吸塵器清除聚集的灰塵-
持有執照的專業技術人員進行-
務中心-
光碟的保養
注意 使用和保養 • 請勿把光碟放在高溫多濕或日光直射的地方-
• 請勿投擲或掉落主機﹐也不可使其受到強烈的外力撞擊- • 不使用時﹐請把光碟放在光碟盒內-堆放或不規整地放置
使用本機中的光學儀器將增加對眼睛的傷害﹐因 在盒外的話﹐可能會使光碟變形-
• 請勿將主機放在不平穩､傾斜或易受振動的地方-
此不可擅自拆卸機殼-維修應委託持有執照的專 • 在主機已經接通電源的情況下﹐切勿搬動主機或改變主機 • 請勿觸摸光碟表面﹐取碟時請拿光碟的邊緣部分-
業技術人員進行- 的位置- • 請勿在光碟上粘貼紙張或膠帶-
• 請勿將主機放在高溫多濕或日光直射的地方（使用溫度範 • 請勿用油性筆或原子筆等在光碟表面寫字或畫圖-
圍為 5°C-35°C）- • 光碟上的指紋､灰塵､污垢或刮痕會導致圖像扭曲或音質
• 請勿將主機放在溫度有急劇變化的地方（例如每小時的溫 下降-平時請仔細保養光碟﹐確保光碟在使用前清潔光
使用 PlayStation2 前務必閱 度差達到或超過 10°C 的地方）- 亮-
• 請使用乾淨軟布從中心向外輕輕擦拭光碟-
讀以下的注意事項 • 請勿將主機放在窗戶密閉的車內（特別是夏天）﹐因為這
• 擦拭光碟時﹐請勿使用輕油精等非 CD 專用的市售清潔劑
可能導致本產品表面變形或發生故障-
有極少部分的人﹐當看到閃光或受強烈的光線照射時會引發 • 請勿在灰塵積聚的地方使用主機- 或用於 LP 唱片的防靜電噴霧劑等﹐以免損壞光碟-
癲癇或昏迷等症狀-這種人當觀看電視（包括 DVD）或觀看 • 請勿讓液體或異物進入主機內-
如這架 PlayStation2 等遊戲機的畫面時﹐有時會出現癲
關於結露現象
• 請勿將主機放在靠近於產生磁場的磁鐵､揚聲器或電視機
癇發作的情形-即使至今未曾有過類似發作經驗的人﹐亦有 若把主機或光碟從寒冷的地方直接搬放到溫暖的場所﹐機內
等的地方-
遭遇上述症狀之可能- 的透鏡或光碟上會凝結水氣-若發生此現象﹐主機可能不正
• 請勿在主機上放置重物-
如果您過去曾經罹患癲癇﹐或是曾經有過眼花撩亂､痙攣､ 常工作-在這種情況下﹐請把光碟取出﹐放置數小時直至水
• 請勿觸摸主機各端子的金屬部分﹐也不可讓異物進入主機
癱瘓､昏迷不醒､精神錯亂或極度興奮等發作經驗的話﹐在 氣蒸發後再放回使用-如果主機仍無法恢復正常操作的話﹐
各端子內-
使用本機之前﹐請先接受醫生的診斷治療- 請打電話給保證書上記載的消費者服務中心-
• 如果長期不打算使用主機的話﹐請將 PlayStation2 主
某些 PlayStation 規格之軟件在 PlayStation2 主機上 機的電源插頭從牆壁插座拔下- 清潔主機
執行時﹐可能會出現某些操作與使用 PlayStation 主機時 • 請拿住插頭部分從牆壁插座拔下電源插頭﹐切勿拉扯電源 清潔主機前﹐為安全起見﹐請務必 1）按主機背面的 MAIN
有差異﹐或是無法在 PlayStation2 主機上正常執行之情 線- POWER（主電源）按鈕關閉 PlayStation2 主機的電源﹐
形-如果您需要更多資訊﹐請就近與保證書上記載的消費者 • 請勿將橡膠或塑膠製品長期放置在主機表面﹐這樣可能損 2）從牆壁插座拔下電源插頭-
服務中心聯繫以獲得技術方面之援助- 壞產品的塑質表面- • 請勿使用稀釋溶劑或其它化學藥劑來清潔主機外殼﹐因為
• 為防止用眼過度﹐遊玩時請每小時休息 15 分鐘左右- 這些劑品可能損傷本產品表面-使用市售的清潔布時﹐請
• 請務必使用附帶的交流電源線- 參照該清潔布的使用說明-
• 移動主機前﹐請先拔下所有的連接線- • 當需要清潔主機外殼時﹐請以用水稀釋過的中性清潔劑濕
潤軟布﹐用力絞去軟布上過剩的液體後擦拭外殼的污痕﹐
檢查交流電源線
最後再用幹布擦淨-
為幫助確保本產品的安全操作﹐請定期檢查交流電源線有無
破損-若發現電源線有損壞﹐請立即中止使用﹐並與保證書 切勿分解或改造主機
上記載的消費者服務中心聯繫- • 請按照使用說明書操作 PlayStation2 主機-嚴禁擅自
分解或改造 PlayStation2 主機﹐禁止分解和使用其電
請勿觸摸主機的各端子
路結構-
請勿觸摸主機各端子的金屬部分﹐也不可將異物放入主機各
• 用戶不可自行維修 PlayStation2 主機內的各部品-擅
端子內-
自分解主機將喪失所有保障權益﹐同時還可能有受鐳射線
傷害或觸電的危險-
 PlayStation2 的對應光碟 3
使用類比控制器（DUALSHOCK2）* 時的安全注 影像部分將無法播放﹐並會顯示出「播放功能受
PlayStation2 規格之 PlayStation2 規格之 PlayStation 規格之
意事項 到限制﹐無法進行播放-」的字句-詳細內容請
DVD-ROM CD-ROM CD-ROM
• 在使用類比控制器（DUALSHOCK2）時﹐如果開始感覺疲 參閱 DVD 錄製裝置附帶的說明書-（CPRM 是對
勞﹐手或手臂感覺不適或疼痛時﹐請立即停止使用主機- 光碟標誌 “ ”﹐PlayStation2 “ ”﹐PlayStation2 PlayStation 和 錄製了「只能複製一次」的節目具有加密功能的
如果情況無好轉﹐請接受醫生的診療-
和 標誌 和 標誌 標誌 防複製技術-）
• 除了用手以外﹐請勿嘗試用任何其他方法操作類比控制器
* 關於各種類型的 DVD 之詳細內容﹐請參閱本使用說明書
（DUALSHOCK2）-請勿讓控制器接觸頭部､臉部或靠近
第 27 頁的「術語解說」-
身體任何其他部位的骨骼- 光碟顏色 銀色 藍色 黑色
• 類比控制器（DUALSHOCK2）的震動功能會加重傷勢-如
果手或手臂的骨骼或關節有病狀的話﹐請勿使用震動功 內容 聲音＋影像 關於特殊形狀的光碟
能-請注意﹐有些 PlayStation2 規格之軟件或 請勿使用心形或星形等不規則形狀的 CD﹐因為這
PlayStation 規格之軟件的初期設定將震動功能設定為 光碟尺寸 12 cm
「開」-在大多數情況下﹐您可通過軟件的選項選單將
類 CD 可能會導致本機發生故障- CT
震動功能設定為「關」-使用類比控制器

開始使用之前
（DUALSHOCK2）操作這類軟件之前﹐請務必將震動功能
音樂 CD DVD（數碼影音光碟）*3 DVD-RW（VR 模式） 播放 DVD 時的注意事項
設定為「關」-
• 某些 DVD 的播放操作方法會因為影片製作者的特殊意
• 請避免連續長時間使用類比控制器（DUALSHOCK2）-每 光碟標誌
圖而受到部分限制-本機乃根據影片製作者設計的光碟
30 分鐘休息一次為宜-
內容進行播放﹐若出現無法配合操作而起動各項機能之
* 以上注意事項同樣適用於類比控制器（DUALSHOCK）的使
現象﹐恕不預先告知-詳細請同時參閱該 DVD 附帶的
用-
使用說明書-
內容 聲音 聲音＋影像 聲音＋影像 • 因為生產過程上的問題或加密技術而發生在
PlayStation2 主機上無法正常操作是非常罕見的特
1 2
光碟尺寸 12 cm 8 cm* 12 cm 8 cm* 12 cm 8 cm*2 例-假如您遭遇到這類問題﹐請先嘗試重新播放-如
（單曲 CD） 果問題仍然無法解決﹐請詢問 DVD 的發售廠商尋求
更多相關資訊或連絡保證書上記載的消費者服務中
"DVD VIDEO"和“DVD-RW"標誌為商標-
心-
*1 注意：垂直豎立主機時﹐如果要播放 8cm 音樂 CD﹐必須另外準備光碟固定架（選購品）-
*2 要播放 8 cm DVD 或 DVD-RW 光碟時﹐您必須水平橫放主機-
*3 「DVD（數碼影音光碟）」是指 DVD-VIDEO､DVD-R､DVD+R 和 DVD+RW 光碟﹐以及以視頻模式錄製的 DVD-RW 光碟-

本機所能播放的 DVD 系統之區域碼 • 有些未印上區域碼的 DVD﹐仍可能會受到地區限

• 本機可以播放 NTSC 制式的光碟﹐而無法播放 制而無法播放-
其他制式規格（例如 PAL､SECAM）的光碟-
• DVD（數碼影音光碟）上都標有 之類的區
播放 DVD-R/DVD-RW/DVD+R/DVD+RW 光碟* 的
域碼-DVD（數碼影音光碟）只能在標示相同
注意事項
號碼的影碟機上播放-區域碼非為「3」的
有些用 DVD-R/DVD-RW/DVD+R/DVD+RW 錄製裝置製
DVD（數碼影音光碟）無法使用本機播放-
作的光碟可能因刮痕､污垢､灰塵､指紋或錄製
• 本機也能播放標有 ALL 的 DVD（數碼影音光
過程中遇到的問題﹐或者因為錄製時的光碟狀態
碟）
而無法進行播放-只有在錄製後進行了最終化操
如果試圖播放除此之外的光碟﹐畫面上會出現
作處理（結束錄製的一個過程）的光碟才可以播
「由於地區限制﹐本光碟無法播放-」的字
放-
句-
利用「只能複製一次」功能錄製在支援 CPRM（可
記錄媒體之內容保護）技術的 DVD-RW 光碟上的
4 目錄 檢查包裝內容

警告
2 請檢查和確認箱子內是否具備以下物品︰
• PlayStation2 主機 • AV 連接線（音頻 視頻一體化）
使用前須知事項
2
開始使用之前 PlayStation2 的對應光碟
3
檢查包裝內容
4
各部名稱
5
• 類比控制器（DUALSHOCK2） • 交流電源線
連接 放置主機
5
連接主機和電視機
6
連接搭配數碼端子的音響設備
7
連接其他數碼設備
8
• 使用說明書（1 套）
使用主選單
8 • 跑車浪漫旅4“序章”版（1 片）

開始玩遊戲
10 如果欠缺任何物品﹐請就近與保證書上記載的消費者服務中心聯繫-

使用 MEMORY CARD（記憶卡）
12
遊戲 音樂 CD 播放音樂 CD
12
播放 DVD
14
DVD
DVD 播放裝置的設定和調整
18
故障檢修
25
規格
26
其他資訊
術語解說
27
維修責任
27
 各部名稱 放置主機 5
PlayStation2主機 您可以垂直或水平放置主機-當垂直放置時﹐建 光碟托盤上的“ ”家族企業標誌
議您使用 PlayStation2 專用直立架 SCPH- 您可以配合主機的放置方式﹐旋轉光碟托盤上的
前面 MEMORY CARD（記憶卡）
插口 10040 G（選購品）-如果沒有 PlayStation2 “ ”家族企業標誌-
專用直立架﹐請如下圖所示地水平放置主機-
“ ”家族企業標誌
當水平放置時﹐建議您使用 PlayStation2 專用
橫放架 SCPH-10110 G（選購品）-
1（預備）/RESET（再
啟動）按鈕和 1 顯示燈

紅外線接收器

A（打開）按鈕和
A 顯示燈 CT

連接
光碟托盤
水平放置 垂直放置

控制器端子
注意事項
• 水平或垂直以外的傾斜放置﹐可能會造成主機的損壞-
• 操作主機時請勿擅自更動主機的放置方式（由原先的水平
放置變成垂直放置-或反之）﹐否則會損壞光碟或導致主
L2 按鈕､R2 按鈕､
機故障-
L1 按鈕､R1 按鈕

方向按鈕

¢ 按鈕､a 按鈕､
✕ 按鈕､s 按鈕

START（開始）按鈕

ANALOG（類比）方式開關

SELECT（選擇）按鈕
左類比操作桿､
右類比操作桿､
背面 L3按鈕､R3按鈕

MAIN POWER（主電源）按鈕

∼AC IN（交流電源輸入）端子

AV MULTI OUT（AV 多重輸出）

端子
DIGITAL OUT (OPTICAL)
（數碼輸出光纖）端子

EXPANSION BAY（擴充槽）
6 連接主機和電視機
如下所述﹐您可使用本機附屬品的 AV 連接線（音頻 視頻一體化）把 PlayStation2 主機連接到具
有影像 聲音輸入端子的電視機上-亦可利用其他特殊的連接線或轉換器（皆為選購品）﹐連接其他類型
連接錄影機時
的電視機-詳細內容請參閱以下各部分的說明- 您可使用本機附屬品的 AV 連接線（音頻 視頻
• 連接具有 S 影像輸入端子的電視機 一體化）把 PlayStation2 主機連接到錄影機
• 連接具有影像色差輸入端子的電視機 上-連接時﹐請注意端子顏色要插入電視機上相
同顏色的端子插孔- 播放 DVD（數碼影音光碟）時
有關上述各部分的說明均假設通過電視機揚聲器輸出聲音-
如果您的電視機是單聲道而非立體聲﹐則不必連
接紅色端子- 錄影機 電視機
連接具有影像 聲音輸入端子的電視機時 當播放 DVD 時﹐請勿將主機連接到錄影機上﹐因
您可使用本機附屬品的 AV 連接線（音頻 視頻一體化）把 PlayStation2 連接到有影像 聲音輸入端 為這會造成畫質鮮明度的降低-請把主機直接連
子的電視機上- 接到電視機上- PlayStation2
連接時﹐請注意端子顏色要插入電視機上相同顏色的端子插孔﹔黃色（影像）端子插入黃色端子插孔､紅 主機
連接完畢之後 直接連接
色（右聲道）端子插入紅色端子插孔､白色（左聲道）插入白色端子插孔- 替電視機和錄影機設定正確的影像輸入頻道（參
連接完畢之後 閱該電視機以及錄影機的使用說明書）-
請替電視機設定正確的影像輸入頻道（參閱電視機的使用說明書）-

連接寬螢幕（長寬比 16﹕9）電視機時 連接具有 S 影像輸入端子的電視機時

請將「系統設定」選單的「螢幕尺寸」設定為「16﹕9」-關於系統設定的詳細說明﹐請參考第 8－9 頁
讓 PlayStation2 主機通過 S 視頻連接線 SCPH-
的說明-
10060 G（選購品）連接電視機﹐可強化畫質之鮮
明度-
如果您的電視機是單聲道
請勿連接紅色端子-若要從單聲道電視機收聽左右兩邊的聲音﹐請選用市售的雙音頻對單音頻（立體聲對單聲道）型音頻連接線 連接完畢之後
（非附屬品）- 替電視機設定正確的影像輸入方式（例如「S 至 AV MULTI OUT
VIDEO（S 視頻）」）- （AV 多重輸出）端子
至 S 影像
輸入端子 至聲音輸入端子
EXPANSION BAY （右）
至聲音輸入端子
（擴充槽）
（左）

MAIN POWER
（主電源）
按鈕
DIGITAL OUT (OPTICAL) ∼AC IN（交流
至影像輸入 （數碼輸出光纖）端子 電源輸入）端子
至聲音輸入
（左） AV MULTI OUT（AV
至聲音輸入 多重輸出）端子
（右）

AV 連接線（音頻 視頻一體化） 交流電源線

 連接搭配數碼端子的音響設備 7
利用數碼連接線（Dolby Digital optical 使用市面上販賣的數碼輸出光纖連接線﹐插入主
連接具有影像色差輸入端子的電視機時 (AC-3)＝杜比數碼（AC-3）光纖）連接 機 DIGITAL OUT (OPTICAL)（數碼輸出光纖）端
PlayStation2 主機的聲音端子﹐通過數碼接收 子連接音響設備-
如果您的電視機或錄影機具備影像色差輸入端子
器（擴大機）及喇叭（揚聲器）﹐您便可以欣賞
時﹐建議您使用 PlayStation2 專用影像色差 PlayStation2
更逼真的多聲道環繞音效- 主機
連接線 SCPH-10100 G（選購品）連接電視機﹐
如此您將可獲得更傳真的鮮明影像- 數碼輸出光纖連接線（選購品）
利用數碼連接線連接接收器（擴
連接前
使用 PlayStation2 專用影像色差連接線連接 大器）､MD（迷你光碟）及 DAT 內建 DTS､Dolby
Digital（杜比數碼
電視機前﹐如果沒有先將「系統設定」選單的 至 AV MULTI OUT
（AV 多重輸出）端子
（數位聲音錄音帶）時 AC-3）或 MPEG 解
CT
「影像色差輸出」選項設定為「Y Cb/Pb Cr/ 碼器的音響設備
Pr」﹐電視畫面可能不正常顯示-請先使用附屬 至聲音 您需要使用市面上販賣的數碼輸出光纖連接線﹐ 喇叭

連接
至影像色差
的 AV 連接線（音頻 視頻一體化）﹐確認「系 輸入端 輸入端子 並調整「系統設定」選單的「DIGITAL OUT
子 (OPTICAL)」（數碼輸出光纖）選項﹐設定為 PlayStation2 主機之 DVD 播放裝置的設定
統設定」選單的「影像色差輸出」選項是設定為
「開」（購買時的初期設定）-系統設定選單之 當 DVD 播放裝置要經由音響設備播放聲音時﹐
「Y Cb/Pb Cr/Pr」之後再使用 PlayStation2
詳細設定方法﹐請參考第 8－9 頁的說明- 您必須做某些必要的設定變更-
專用影像色差連接線進行連接-
PlayStation2 主機背面 詳細的設定方法﹐請參考第 18－24 頁「DVD 播
放裝置的設定和調整」的說明-
注意事項
MAIN
• PlayStation 2 主機不直接相容 HDTV（高畫質電視）﹐ POWER 所連接的音響設備 • 當您連接內建 DTS 解碼器的音響設備時
您必須另外準備對應軟件及連接裝置- ~ DIGITAL INPUT 開啟「聲音設定」選單後﹐將「DIGITAL OUT
AC IN
• 您必須使用影像色差連接線才能以逐行掃描觀看 DVD-如
(OPTICAL)」（數碼輸出光纖）設定為「開」﹐
果選擇逐行掃描後畫質下降﹐請選擇通常的隔行掃描模式 DIGITAL OUT
OPTICAL
AV MULTI OUT
觀看-詳細內容請參閱第 9 頁的「Progressive（逐行掃
(OPTICAL)
然後將「DTS」設定為「開」-
描）」- • 當您連接內建 Dolby Digital（杜比數碼
詳細請參閱電視機的使用說明書-
AC-3）解碼器的音響設備時
注意事項 開啟「聲音設定」選單後﹐將「DIGITAL OUT
• 連接時﹐請同時參閱音響設備的使用說明書﹐以確保正確 (OPTICAL)」（數碼輸出光纖）設定為「開」﹐
使用- 然後將「Dolby Digital」設定為「開」-
• 您無法使用 MD 或 DAT 機從採用 Dolby Digital､DTS 或
靜止畫面的注意事項 畫面跳動現象注意事項 MPEG 音頻格式的光碟直接錄製數碼格式音頻-
• 當您連接內建 MPEG 解碼器的音響設備時
DVD 選單､標題選單及本機的設定畫面等靜止畫面假如長 有部分電視機或錄影機連接 PlayStation2 主機後﹐畫 開啟「聲音設定」選單後﹐將「DIGITAL OUT
時間顯示在電視機上﹐有可能發生影像出現模糊的殘像問 面會發生上下跳動現象-遇此情形時﹐建議您將 (OPTICAL)」（數碼輸出光纖）設定為「開」﹐
題-特別是液晶方式以外的螢幕投影電視相當容易發生上 PlayStation2 連接到其他電視機上- 連接內建 DTS*､Dolby Digital
然後將「MPEG」設定為「開」-
述問題﹐因此您最好避免使用該類電視機- 如果畫面失真現象仍舊無法解決﹐請聯絡保證書上記載的
消費者服務中心- （杜比數碼 AC-3）** 或 MPEG 解 注意事項
碼器（僅限 DVD）的音響設備 當連接音響設備時﹐請同時參閱該音響的使用說明﹐正確連
接-
連接內建 DTS､Dolby Digital（杜比數碼
AC-3）或 MPEG 解碼器的音響設備（選購品）﹐ * “DTS”､“DTS Digital Out”是 Digital Theater
System,Inc. 的商標-
您可欣賞到 DVD 中﹐以 Dolby Digital（杜比
** 本製品經杜比實驗室授權生產-“杜比”､“Dolby”和雙
數碼 AC-3）､DTS 格式或 MPEG 格式錄製的逼 D 標誌是杜比實驗室的商標-
真音效﹐而享受到有如置身電影院或演唱會場般 非公開機密著作物- 1992-1997 Dolby
的臨場效果- Laboratories.（杜比實驗室）版權所有-
8 連接其他數碼設備 使用主選單
經由 USB (Universal Serial
第一次接通電源啟動主機時﹐螢幕上會出現提示 1 確認您想要檢查 拷貝 刪除的
您調整語言和時間等初期設定的畫面-這些設定
Bus) 連接埠連接其他設備 以後可以通過系統設定選單進行修改-詳細內容
遊戲資料﹐選擇 PlayStation2
經由 USB 連接埠﹐本機可連接其他支援 USB 請參考第 8－9 頁的「使用系統設定選單」- 專用 MEMORY CARD（記憶卡）
設定完畢後﹐當您沒有放入光碟就啟動主機時﹐
的周邊設備-連接時﹐請同時參閱該產品的使用 (8MB) 或 MEMORY CARD（記憶
說明書﹐正確連接- 螢幕上就會出現如下的主選單-
卡）的圖標後﹐按 ✕ 按鈕決定/

2 依照畫面指示﹐檢查 拷貝 刪
除資料/
注意事項
在執行拷貝或刪除遊戲資料的過程中﹐切勿拔起或插入
PlayStation2 專用 MEMORY CARD（記憶卡）(8MB)､MEMORY
您可以選擇從主選單進入「瀏覽器」介面或「系 CARD（記憶卡）-

統設定」選單-
USB 連接埠 使用「系統設定」選單
注意事項 使用「瀏覽器」介面 您可以使用「系統設定」選單修改或更新
並非所有支援 USB 的周邊設備都適用於 PlayStation2 主
進入「瀏覽器」介面後可以執行下列幾項操作- PlayStation2 主機的個人系統設定-
機-使用時﹐請同時參閱該機器的使用說明書- 以下這些個人設定並不會因為電源的關閉而消
• 檢查 拷貝 刪除保存在 PlayStation2 專
用 MEMORY CARD（記憶卡）(8MB) 或 MEMORY 滅﹐且會繼續地被保存於主機內-
CARD（記憶卡）中的遊戲資料 購買時的初期設定標有下線-
• 啟動 PlayStation 或 PlayStation2 規格之
軟件
1 用方向按鈕之上下按鈕﹐選擇
• 播放音樂 CD 「系統設定」﹐按 ✕ 按鈕決
• 播放 DVD（數碼影音光碟） 定/
用方向按鈕之上下按鈕﹐選擇「瀏覽器」﹐按 螢幕上會出現「系統設定」選單/
✕ 按鈕決定-
螢幕上會出現「瀏覽器」介面﹐並顯示目前被插 2 用方向按鈕之上下按鈕﹐選擇您
在主機上的 PlayStation2 專用 MEMORY CARD
想要修改的項目﹐按 ✕ 按鈕決
（記憶卡）(8MB) ､MEMORY CARD（記憶卡）以
及光碟的圖標- 定/
檢查 拷貝 刪除資料 x 調整時鐘
您可以將儲存在 PlayStation2 專用 MEMORY 設定現在時刻-
CARD（記憶卡）(8MB) 或 MEMORY CARD（記憶
卡）中的遊戲資料拷貝到別的記憶卡裡﹐不用的 1 用方向按鈕之上下﹐調整年份後
資料也可以自行刪除-不過您無法將
按方向按鈕之右按鈕決定執行/
PlayStation2 規格之軟件的遊戲資料拷貝到
MEMORY CARD（記憶卡）SCPH-1020 HI 內- 請用上述方法分別設定月份､日期､小
將 PlayStation2 專用 MEMORY CARD（記憶 時､分､秒/要回到先前的項目時﹐按
卡）(8MB) 或 MEMORY CARD（記憶卡）插在主機 方向按鈕之左按鈕/
上-
2 按 ✕ 按鈕啟動時鐘/
 9
選擇時鐘的顯示方式 注意事項
您可以選擇使用 RGB 輸出或影像色差輸出來播放
1 用方向按鈕之上下按鈕﹐選擇 x 解除 Progressive（逐行掃描）設定
用方向按鈕之上下﹐選擇「調整時鐘」後按 f 您可解除 DVD 播放裝置的 Progressive（逐行掃
按鈕﹐您即可設定顯示方式-
PlayStation 或 PlayStation2 規格之軟件-但 「主機」後﹐按 f 按鈕決定/ 描）設定-
PlayStation2 主機之「系統設定」選單的「影像色差輸出」
時間顯示方式 設定並無法適用到所有對應光碟-當播放 DVD（數碼影音光
碟）時會自動選擇影像色差輸出（Y, Cb/Pb, Cr/Pr）-
2 用方向按鈕之上下按鈕﹐選擇 Progressive 設定
• 12 小時制 • 不解除
「開」後﹐按 ✕ 按鈕執行/
• 24 小時制 x 遙控器 • 解除
日期顯示方式
•月 日 年
選擇使用 PlayStation2 專用 DVD 遙控器（選 3 放入光碟/ 1 用方向按鈕選擇「DVD 播放裝
購品）進行操作-
•日 月 年 主機開始自動診斷- 置」後﹐按 f 按鈕執行/
• 遊戲操作功能 開：使用 DVD 遙控器操作
•年 月 日 注意事項
PlayStation2 規格之軟件或 PlayStation CT
時區設定 規格之軟件時﹐選擇此項設定-
當您按下 1 （預備）/ R E S E T （再啟動）按鈕､或放入
2 按 ✕ 按鈕決定/

連接
PlayStation2 規格､PlayStation 規格之軟件､DVD（數
設定目前的所在時區- • 遊戲操作功能 關：不使用 DVD 遙控器操作 碼影音光碟）時﹐自動診斷功能會自動跳回「關」（購買時
PlayStation2 規格之軟件或 PlayStation 的初期設定）- 3 用方向按鈕選擇「解除」後﹐按
夏令時間
規格之軟件時-
x PlayStation 驅動程式 ✕ 按鈕決定/
如有必要﹐您可選擇本項目設定「夏令時間」-
注意事項
• 標準時間 PlayStation 驅動程式指的是一個用來讀取 Progressive 設定不會在關機後立刻解
• 將遙控器設定為「遊戲操作功能 開」時﹐如果從控制器
• 夏令時間 端子 1 拔下控制器﹐某些 PlayStation2 規格之軟件或 PlayStation 規格軟件的系統程式- 除-設定將在 DVD 光碟開始播放時才被
PlayStation 規格之軟件可能會停止運作-若出現這種 解除-
光碟讀取速度
x 螢幕尺寸 情況﹐請將設定改為「遊戲操作功能 關」-
• 標準：通常的標準設定-
選擇所連接的電視機的縱寬比- • 本 DVD 遙控器可能會出現無法支援現有 PlayStation2
規格或 PlayStation 規格之軟件的遊戲操作功能-另 • 高速：縮短 PlayStation 規格之軟件的載入
4 按 a 按鈕返回主選單後用方向
• 4:3︰使用普通電視機時的標準設定-
• 全畫面︰使用普通電視機時﹐寬螢幕規格的影像
外﹐同時按下多顆遙控器按鈕可能會導致 DVD 遙控器無 時間-但在使用一部分﹐高速效果不明顯或無 按鈕選擇「瀏覽器」後﹐按 ✕ 按
法正常運作-
法高度讀取的軟件時﹐請選擇「標準」以確保
會自動顯示在整個螢幕上﹐但左右兩邊的部份將 鈕/
x 語言 光碟的正常運作-
被切割-
• 16:9︰使用寬螢幕規格的電視機時的標準設定- 選擇螢幕的顯示語言-
• 繁體中文 材質貼圖 5 用方向按鈕選擇 DVD video 圖
x DIGITAL OUT (OPTICAL)（數碼輸出光纖） • 英文 • 標準：通常的標準設定- 標後﹐按 ✕ 按鈕/
• 平滑補正：自動修補 PlayStation 規格之軟
選擇是否使用 DIGITAL OUT (OPTICAL)（數碼輸 DVD 播放裝置的 Progressive 設定被解
確認版本 件的部分粗糙圖像-但在使用一部份無法平滑補
出光纖）傳送聲音信號- 除﹐開始播放-
您可確認版本及各種設定- 正的軟件時﹐請選擇「標準」-
• 開︰使用數碼輸出光纖連接線（選購品）傳送 注意事項
時﹐通常的標準設定- 在主選單畫面上按 f 按鈕則出現版本的畫面-
• 關︰不使用數碼輸出光纖端子傳送聲音信號時- 初期設定標有下線-
1 用方向按鈕之上下按鈕﹐選擇
• 此設定僅在「Progressive」設定為「開」時才能被解除-
當「Progressive」設定為「關」時﹐則不會出現在 DVD
播放裝置的選單中-
「PlayStation 驅動程式」
x 影像色差輸出 x 自動診斷 • 關於將「Progressive」設定為「開」的詳細情況﹐請參

當您利用 RGB 連接線或影像色差連接線（皆為選 命令主機自動調整光碟的運轉到最佳狀態之功能 後﹐按 f 按鈕執行/ 閱第 21 頁的「DVD 播放裝置的設定和調整」的

「Progressive（逐行掃描）」部分-
購品）連接您府上的電視機､錄影機或顯示器 的設定-但是﹐當自動診斷設定為「開」時﹐主
時﹐請修改本項設定- 機進行追加調整﹐有可能使原先無法播放的光碟 2 用方向按鈕之上下按鈕﹐指定您 • 如果在完成上述步驟 5 之前出現下列情況﹐則
Progressive 設定不會被解除：
假如您是使用附屬的 AV 連接線（音頻 視頻一 可以進行播放- 想要執行的功能後﹐按 ✕ 按鈕 – 按了 1（預備）/RESET（再啟動）按鈕-
– 用主機背面的 MAIN POWER（主電源）按鈕關閉了主機
體化）或 S 視頻連接線連接主機﹐則不需要做任 自動診斷 決定/ 電源-
何變更修改- •關 注意事項
• Y Cb/Pb Cr/Pr︰透過影像色差輸入端子連接 •開 當您按下 1（預備）/RESET（再啟動）按鈕､或關閉電源
時- 後﹐PlayStation 驅動程式的設定會自動跳回「標準」（購
• RGB︰透過 RGB 輸入端子連接時- 買時的初期設定）-
10 開始玩遊戲
3 已經放入一張 PlayStation 規格的
遊玩的第一步 顯示啟動畫面
CD-ROM
沒有放入光碟就接通電源時
1 按主機背面的 MAIN POWER（主電 4 按 A（打開）按鈕/ 螢幕上出現 1 畫面-
源）按鈕﹐接通電源/ 打開光碟托盤- • 於出現 1 畫面後插入一片 PlayStation2
規格或 PlayStation 規格的軟件﹐螢幕上會
當主機前面的 1（預備）顯示燈亮紅燈
5 使標籤之面朝上﹐將光碟放入托 顯示 2 或 3 畫面﹐代表您可以開始玩遊
時﹐代表本機目前處於預備狀態-
盤/ 戲-
2 按 1（預備） RESET（再啟 • 您可以選擇從 1 畫面切換進入「系統設定」

動）按鈕/
6 按 A（打開）按鈕/ 選單或「瀏覽器」介面-詳細請參考第 8－9 4 您放入了一張 PlayStation2 主機無法
頁「使用主選單」的說明-
關閉托盤-螢幕上出現 2 或 3 畫面﹐ 播放的光碟
1（預備）顯示燈亮綠燈﹐螢幕上出現
代表進入待機狀態-
啟動畫面- 當接通電源﹐主機內已經放入一片光碟時

3 將類比控制器（DUALSHOCK2）插 注意事項
類比控制器（DUALSHOCK2）或類比控制器（DUALSHOCK）
螢幕會依據光碟的種類而顯示 2 或 3､4
畫面-出現 4 畫面時﹐代表您放入的光碟可能
入主機的控制器端子/ 對應軟件的設定方法﹐請參考第 11 頁「方式轉換和方式顯 既不是 PlayStation 規格﹐亦非
示燈」的說明-詳細情況請參閱遊戲說明書-
PlayStation2 規格的軟件-請參考第 3 頁有
關光碟類型的說明-

1 1 沒有放入光碟（主選單）
結束遊戲

1 按 A（打開）按鈕/
打開光碟托盤/

2 取出光碟/
2
3 2 已經放入一張 PlayStation2 規格的 3 按 A（打開）按鈕/
4,6 DVD-ROM CD-ROM 關閉托盤/

4 1/RESET（再啟動）按鈕按住 3
5 秒鐘以上/
1 顯示燈亮紅燈﹐主機回到預備狀態-

再啟動
輕按 1/RESET（再啟動）按鈕-（按鈕時間過
長﹐會導致主機回到預備狀態-）
在遊玩途中按該按鈕﹐會強制結束遊戲並喪失所 4
有當時尚未保存的遊戲資料﹐敬請注意-
1,3

2
 11
長期不使用本機時 • 您可以自由選擇數碼方式或類比方式進行操作-
使用類比控制器（DUALSHOCK2） 選擇類比方式時﹐可以類比操控左類比操作桿及
震動功能
請按主機背面的 MAIN POWER（主電源）按鈕﹐
關閉電源-並從牆壁插座拔下交流電源線- • 可對應 PlayStation2 規格及 PlayStation 右類比操作桿- 當使用的軟件支援震動功能時﹐類比控制器
規格的軟件-詳細請參閱遊戲說明書- （DUALSHOCK2）能提供玩者有如擬似體驗般的震
PlayStation2 規格的軟件
• 您可以自由選擇數碼方式或類比方式進行操作- 動效果-震動功能的「開」或「關」請選擇遊戲
左類比操作桿 右類比操作桿
選擇類比方式時﹐可以類比操控以下按鈕- 的選項設定後進行修改-
嘗試玩其他遊戲 PlayStation 規格的軟件
PlayStation2 規格的軟件 注意事項
左類比操作桿 右類比操作桿
更換光碟並不需要關閉電源- 方向按鈕 f 按鈕､a 按鈕､✕ 按鈕､s 按 • 長時間不使用類比控制器（DUALSHOCK2）時﹐請關閉主機
• 您可使用震動功能-
鈕 左類比操作桿 右類比操作桿 L1､R1､ 電源或從主機上拔下控制器-
1 按 A（打開）按鈕/ L2､R2 按鈕 • 在使用控制器的震動功能之前﹐請先閱讀第 3 頁的「使

打開光碟托盤/ 方式轉換和方式顯示燈 用類比控制器（DUALSHOCK2）時的安全注意事項」- CT

PlayStation 規格的軟件

遊戲 音樂 CD
左類比操作桿 右類比操作桿 按 ANALOG（類比）方式開關﹐可更改類比控制
2 取出光碟/
• 您可使用震動功能- 器（DUALSHOCK2）目前所使用的控制方式- 使用類比控制器（DUALSHOCK2）
3 將另一片光碟放入托盤/
使用類比控制器（DUALSHOCK）
每按一次 ANALOG（類比）方式開關﹐都將如下圖
般地改變控制方式-
前

4 按 A（打開）按鈕/ （選購品） 數碼方式（方式顯示燈：紅燈滅）

Xx
關閉托盤- • 可對應 PlayStation2 規格及 PlayStation 類比方式（方式顯示燈：紅燈亮）
規格的軟件-詳細請參閱遊戲說明書-
5 輕按 1（預備）/RESET（再啟 注意事項 接通主機電源後﹐請先用拇指如畫圓圈般旋轉一下
控制器的操作桿（如上圖所示）﹐請不要扭轉操作
使用時請自行選擇適合的模式-
動）按鈕/ 但請注意﹐某些軟件的設定會優先於方式顯示燈的更改機 桿/
能﹐而強制要求更改控制模式-詳細內容請參閱相關的軟件
（注意事項：按鈕時間過長﹐會導致主
說明書-
機回到預備狀態-）
啟動畫面後顯示 2 或 3 畫面﹐即代
表您可以開始玩遊戲-
數碼方式（方式顯示燈︰紅燈滅） 類比方式（方式顯示燈︰紅燈亮）

L2 按鈕 R2 按鈕
SELECT START
L2 按鈕 R2 按鈕 L1 按鈕 R1 按鈕
5 SELECT START （選擇）（開始）
L1 按鈕 （選擇）（開始） R1 按鈕 按鈕 按鈕

1,4 按鈕 按鈕 f 按鈕
f 按鈕
2,3 方向按鈕 a 按鈕
方向按鈕 a 按鈕
注意事項
當遊玩複數張光碟收錄的遊戲﹐要更換光碟時﹐請依照前述 ✕ 按鈕
之步驟 1∼4﹐正確操作-詳細請參閱遊戲說明書- ✕ 按鈕
左類比操作桿 s 按鈕
s 按鈕 L3 按鈕* 右類比操作桿 R3
按鈕*
ANALOG（類 方式顯示燈︰紅燈滅 ANALOG（類比） 方式顯示燈︰紅燈亮
比）方式開關 方式開關
* R3 按鈕和 L3 按鈕只有當按壓操作桿時才能使用/
12 使用 MEMORY CARD（記憶卡） 播放音樂 CD
您可以使用 PlayStation2 專用 MEMORY CARD 注意事項
（記憶卡）(8MB) 或 MEMORY CARD（記憶卡） 比 PlayStation2 專用 MEMORY CARD（記憶卡）(8MB) 或
檢查 拷貝 刪除遊戲資料 播放音樂 CD
MEMORY CARD（記憶卡）內部剩下的空白記憶體更大的遊戲資 您可以將保存在 PlayStation2 專用MEMORY
（均為選購品）保存或載入遊戲資料-
料是無法保存的-請在開始之前﹐先查看保存資料時的記憶
CARD（記憶卡）(8MB) 或 MEMORY CARD（記憶 1 按 A（打開）按鈕/
體必須容量與記憶卡內的空白記憶體容量-保存資料的記憶
PlayStation2 專用 MEMORY 體必須容量﹐都記載在各軟件的遊戲解說書等地方-
卡）中的遊戲資料拷貝到別的記憶卡裡﹐或是自 打開光碟托盤-
PlayStation2 專用 MEMORY CARD（記憶卡）(8MB) 採用 行刪除不需要的資料-不過您無法將
CARD（記憶卡）(8MB) 和 MAGICGATE 技術﹐該技術通過數據資料加密以有助於保護已 PlayStation2 規格之軟件的遊戲資料拷貝到 2 使標籤之面朝上﹐將光碟放入托
獲得著作權之內容-
MEMORY CARD（記憶卡）的不同 MEMORY CARD（記憶卡）內- 盤/
是 SONY 集團開發的著作權保護技術之 您可以進入「瀏覽器」介面﹐檢查､拷貝或刪除
當遊玩 PlayStation2 規格的軟件時﹐請使
名稱-
不保證與其他印有「MagicGate」標誌之
遊戲資料-「瀏覽器」介面上的詳細操作方法﹐ 3 按 A（打開）按鈕/
用 PlayStation2 專用 MEMORY CARD（記憶 產品間的互換相容性-
請參考第 8 頁「檢查 拷貝 刪除資料」的說
關閉托盤-
卡）(8MB)（1）- 明-
當遊玩 PlayStation 規格的軟件時﹐請使用 注意事項 4 用方向按鈕選擇音樂 C D 圖標
MEMORY CARD（記憶卡）-（2） 插入記憶卡 您無法在「瀏覽器」介面上直接保存或載入遊戲資料-保存
後﹐按 ✕ 按鈕/
或載入遊戲資料的方法﹐請參閱遊戲說明書-
請箭頭朝上﹐將 PlayStation2 專用 MEMORY
PlayStation 主機用來保存遊戲資料的記憶體 螢幕上顯示音樂 CD 操作畫面-
CARD（記憶卡）(8MB) 或 MEMORY CARD（記憶
普通是以「memory blocks（記憶體區塊）」為
單位計算﹐但 PlayStation2 主機則採用「KB
卡）插入主機的 MEMORY CARD（記憶卡）插口- 5 選擇想要播放的曲目號碼後﹐按
（千位元組）」計算- ✕ 按鈕/
* 8 MB = 8,000 KB
播放開始-
1 PlayStation2 專用 MEMORY CARD（記憶
卡）(8MB)（選購品）
PlayStation 2 專用 MEMORY CARD（記憶卡）
結束播放音樂 CD
(8MB) 可以保存並且載入 PlayStation2 規格
之軟件的遊戲資料-一塊 PlayStation2 專用
1 按 A（打開）按鈕/
MEMORY CARD（記憶卡）(8MB) 大約能夠保存 8MB MEMORY CARD MEMORY CARD 打開光碟托盤-
（記憶卡）插口 1 （記憶卡）插口 2
的遊戲資料﹐但部分記憶體必須用來保存檔案管
理情報-
2 取出光碟/
使用多重連接器安裝記憶卡的注意事項
2 MEMORY CARD（記憶卡）（選購品） • 在遊玩 PlayStation2 規格之軟件時﹐請使 3 按 A（打開）按鈕/
M E M O R Y C A R D （記憶卡）可以保存並且載入 用 PlayStation2 專用（對戰）多重連接器
關閉光碟托盤-
PlayStation  規格之軟件的遊戲資料-一塊 SCPH-10090 G-遊玩 PlayStation 規格之軟
MEMORY CARD（記憶卡）大約能夠保存 120KB（15 件時﹐請使用（對戰）多重連接器 SCPH- 4 按住 1（預備）/RESET（再啟
個記憶體區塊）的遊戲資料- 1070 G-
• 當把對應 PlayStation 的（對戰）多重連接
動）按鈕持續 3 秒鐘以上/
器 SCPH-1070 G 插在控制器端子 1 時﹐請不 主機進入預備狀態-
要將 PlayStation2 專用 MEMORY CARD（記
憶卡）(8MB) 或 MEMORY CARD（記憶卡）插在
PlayStation2 主機的 MEMORY CARD（記憶
卡）插口 1 上/插在控制器端子 2 時亦同/
否則遊戲資料可能會遭到損壞/
 13

操作 CD 播放裝置 各種播放模式 2 用方向按鈕選擇「隨機」後﹐按 重複播放單一曲目

✕ 按鈕設定/
您可利用控制介面或直接按類比控制器
（DUALSHOCK2）的按鈕來操作 CD 播放裝置-
您可以選擇各種播放模式-「播放模式」的初期
設定為「正常」﹐「重複」的初期設定為
1 用方向按鈕選擇「重複」後﹐按
您也可以使用 PlayStation2 專用 DVD 遙控器 「關」- 3 按 a 按鈕﹐回到「瀏覽器」介 ✕ 按鈕執行/
SCPH-10420 G（選購品）操作 CD 播放裝置- 進入「瀏覽器」介面﹐選擇音樂 CD 的圖標﹐按 面/
播放光碟時﹐用方向按鈕選擇 CD 操作畫面上的 f 按鈕即可修改設定- 2 用方向按鈕選擇「單曲」後﹐按
圖標後﹐按 ✕ 按鈕-
自己編排播放順序（編序播放）
4 選擇音樂 CD 圖標後按 ✕ 按鈕/ ✕ 按鈕設定/
N 開始播放
各曲目以任意順序顯示於畫面上-選擇
X 暫停
1 用方向按鈕選擇「播放模式」 您想要播放的曲目號碼後按 ✕ 按鈕-
3 按 a 按鈕﹐回到「瀏覽器」介
x 停止播放 CT
開始播放- 面/
. 倒回播放中歌曲的開頭或上一首曲子的開 後﹐按 ✕ 按鈕執行/

遊戲 音樂 CD
M 快進
頭
2 用方向按鈕選擇「編序」後﹐按
重複執行隨機播放 4 選擇音樂 CD 圖標後按 ✕ 按鈕/
按照上述 1 至 3 的步驟﹐然後參照重複播放所
m 快退 曲目顯示於畫面上-選擇您想要播放的
✕ 按鈕執行/ 有曲目或單一曲目的說明進行操作-詳細內容請
> 進到下一首曲子的開頭 參閱本頁的「重複播放所有曲目」和「重複播放 曲目號碼後按 ✕ 按鈕-開始播放-
3 使用方向按鈕選擇要播放的曲目 單一曲目」- 重複播放想要播放的曲目或重複以任意順序播
L2 按鈕： R2 按鈕：
放
m（快退） M（快進） 號碼﹐按 ✕ 按鈕設定/ 重複播放所有曲目
按照上述 1 至 3 的步驟﹐然後參照以指定或任
反覆以上步驟選擇完畢後﹐即按照指定
L1 按鈕： R1 按鈕： 的順序進行播放- 1 用方向按鈕選擇「重複」後﹐按 意順序播放想要播放的曲目的說明進行操作-詳
細內容請參閱本頁的「自己編排播放順序」和
.（後退） >（前進）
✕ 按鈕執行/ 「以任意順序播放」-
4 按 a 按鈕﹐回到「瀏覽器」介 您可通過顯示曲目號碼的畫面進入播放選項畫
面後﹐按 ✕ 按鈕開始播放/ 2 用方向按鈕選擇「全曲」後﹐按 面-
✕ 按鈕設定/ 用方向按鈕之上按鈕或左按鈕選擇畫面左上方的
5 選擇音樂 CD 圖標後按 ✕ 按鈕/ 音樂 CD 小圖標﹐然後按 f 按鈕-

SELECT（選擇）按鈕： START（開始）按鈕：
各曲目按已編排的順序顯示於畫面上- 3 按 a 按鈕﹐回到「瀏覽器」介 出現播放選項畫面﹐您可按本頁的「各種播放模
式」操作 CD 播放裝置-
x （停止） N（開始）/X（暫停） 選擇您想要播放的曲目號碼後按 ✕ 按 面/
在 CD 操作畫面按 a 按鈕後會顯示出曲目-
鈕-開始播放-
選擇您想要播放的曲目﹐然後按 ✕ 按鈕-開始
重複播放想要播放的曲目
4 選擇音樂 CD 圖標後按 ✕ 按鈕/
播放-
採用保護著作權之加密技術的音樂光碟
按照上述 1 至 4 的步驟﹐然後參照重複播放所 各曲目顯示於畫面上-選擇您想要播放
本產品的音樂 CD 播放特色是以 Compact Disc 播放 DTS 音軌的音樂 CD 時的注意事項
(CD) 的標準規格為基準而設計的-最近﹐有些唱 有曲目或單一曲目的說明進行操作-詳細內容請 的曲目號碼後按 ✕ 按鈕-開始播放- • 在播放以 DTS 格式錄製的音樂CD時﹐與 AV 多重輸出端
片公司開始銷售採用保護著作權之加密技術的音樂 參閱本頁的「重複播放所有曲目」和「重複播放 子連接的音響裝置之類比聲音輸出口會發出極大的噪
重複播放想要播放的曲目或重複以任意順序播
光碟-其中有部分光碟與 CD 的標準規格不一致﹐ 單一曲目」- 音-如果音響裝置的類比聲音輸出口是與接收器（放大
放 機）連接的話﹐請注意防止音響系統受到損壞-在播放
因此可能無法在本產品上進行播放-
以任意順序播放（隨機播放） 按照上述 1 至 3 的步驟﹐然後參照以指定或任 DTS 音軌時﹐您必須將 DTS 解碼器連接至 DIGITAL OUT
意順序播放想要播放的曲目的說明進行操作-詳 (OPTICAL)（數碼輸出光纖）端子-

1 用方向按鈕選擇「播放模式」 細內容請參閱本頁的「自己編排播放順序」和 • 在「系統設定」選單將「DIGITAL OUT (OPTICAL)」設定

為「關」時﹐即使通過光纖數碼連接線連接音響設備﹐
「以任意順序播放」-
後﹐按 ✕ 按鈕執行/ 您也無法從音樂 CD 收聽到 DTS 音效-
14 播放 DVD
• 您還能使用 PlayStation2 專用 DVD 遙控器
結束播放 DVD 操作 DVD 播放裝置 （選購品）操作 DVD 播放裝置-
看完 DVD 後﹐請按下列步驟保存 DVD 播放裝置 操作DVD播放裝置的方法有三種：
播放 DVD 使用類比控制器（DUALSHOCK2）
的設定﹐或者返回瀏覽器畫面或讓主機進入預備 • 您可直接使用類比控制器（DUALSHOCK2）按照
類比控制器（DUALSHOCK2）各按鈕的功能如下
某些 DVD 會因為製作上的限制﹐出現操作異 狀態- 以下說明操作 DVD 播放裝置-
所示-
常或無法操作的問題-詳細請參閱光碟的使用 • 您可通過畫面上的控制介面操作 DVD 播放裝
說明-
1 按 A（打開）按鈕/ 置-從控制介面可以進入 DVD 播放裝置的另外
注意
顯示出控制介面時﹐您無法使用類比控制器
光碟托盤打開後﹐出現瀏覽器畫面- 一些選項及設定畫面-詳細內容請參閱第 15 頁 （DUALSHOCK2）的直接按鈕功能-

1 按主機背面的 MAIN POWER（主電 2 取出光碟/

的「使用控制介面」-

L2 按鈕： （快退尋找）
源）按鈕﹐接通電源/ （第 19 頁） R2 按鈕： （快進尋找）
當主機前面的 1（預備）顯示燈亮紅燈
3 按 A 按鈕關閉光碟托盤/ （第 19 頁）

L1 按鈕：.（後退） R1 按鈕：>（前進）
時﹐表示本機目前處於預備狀態-
4 按住 1/RESET（再啟動）按鈕持
2 按 1（預備） RESET（再啟 續 3 秒鐘以上/ DUALSHOCK 2 f 按鈕： （選單）
（第 19 頁）
動）按鈕/ 1 顯示燈變成紅燈﹐主機進入預備狀
1（預備）顯示燈亮綠燈﹐螢幕上出現 態- 方向按鈕：控制游標 a 按鈕：解除 x（停止）

啟動畫面- 注意事項
要保存變更後的 DVD 播放裝置的設定﹐您必須先退出 DVD﹐
✕ 按鈕：決定
3 按 A（打開）按鈕/ 然後再按 1（預備） RESET（再啟動）按鈕或主機背面的
MAIN POWER（主電源）按鈕關閉電源-
打開光碟托盤- s 按鈕： （頂部選單）
如果您在播放 DVD 時遭遇到問題： （第 16 頁）
4 使標籤之面朝上（播放之面朝 因為生產過程上的問題或加密技術而發生在
L3 按鈕*：
（第 18 頁）
（字幕選項）
R3 按鈕*： （聲音選項）
下）﹐將光碟放入托盤/ PlayStation2 主機上無法正常操作情形是非 （第 18 頁）
常罕見的-假如您遭遇到這類問題﹐請先嘗試
SELECT（選擇）按鈕*： START（開始）按鈕︰
5 按 A（打開）按鈕/ 重新播放- 如果問題仍然無法解決﹐請詢問 顯示控制介面（第 15 頁） N（播放） X（暫停）
DVD的發售廠商尋求更多相關資訊或聯絡保證書
關閉托盤﹐開始播放-
上記載的消費者服務中心- * 如果您使用沒有 L3､R3 按鈕的控制器﹐請開啟控制介面後（參考第 15 頁的說明）選擇 （字幕選項）或 （聲音選
注意事項 項）-
• PlayStation2 主機具備多種先進播放功能﹐使影音質量
更趨完美-選用這些功能時需先調整設定﹐詳細內容請參
閱第 20-26 頁- 機能 操作按鈕
• 在播放後按 A 按鈕﹐螢幕上會顯示「瀏覽器」介面-
停止 按 a 按鈕
• 播放 DVD 光碟時﹐請勿將主機連接在錄影機上﹐否則可
能導致畫質下降-請將主機直接連接至電視機- 按 START（開始）按鈕
暫停

暫停後恢復播放 按 START（開始）按鈕

進到下一個章的開頭 按 R1 按鈕

倒回播放中章的開頭或上一個章的開頭 按 L1 按鈕
 15

使用控制介面 控制介面項目一覽表
利用畫面上的控制介面﹐您可選擇各種播放模
式﹐還能調整 DVD 播放裝置的各項設定-
請使用如下所示的類比控制器（DUALSHOCK2）
qf 尋找（第 19 頁）
操作控制介面-
朝相反方向快速播放畫面以幫助尋找某個特定
場面-
DUALSHOCK 2

qg 尋找（第 19 頁）
朝播放方向快速播放畫面以幫助尋找某個特定
場面-
CT

DVD
qh 慢放（第 19 頁）
朝相反方向進行慢動作播放-
方向按鈕 SELECT（選 ✕ 按鈕 a 按鈕
擇）按鈕 qj 慢放（第 19 頁）
朝播放方向進行慢動作播放-
顯示或關閉控制介面：SELECT（選擇）按鈕
qk N 播放
決定 ：✕ 按鈕
開始播放-
解除 ：a 按鈕
ql X 暫停
選擇 ：方向按鈕之上下左右按鈕 暫停或恢復播放-

1 選單（第 16 頁） 8 設定（第 19 頁） w; x 停止
1 按 SELECT（選擇）按鈕/ 顯示 DVD 的光碟選單-選單內容因光碟而 顯示變更各種圖像和聲音選項的設定顯示- 停止播放-
異- 您還可選擇字幕語言和選單語言､設定視聽年
螢幕上顯示控制介面- wa A-B 重複播放（第 17 頁）
齡限制等級等-
2 頂部選單（第 16 頁） 播放已設定要重複播放的某個場面-
顯示 DVD 的光碟選單-選單內容因光碟而 9 時間顯示（第 19 頁）
ws 隨機播放（第 17 頁）
異- 顯示目前的標題號碼､章號碼､已經播放時間
任意播放標題或章-
以及剩餘播放時間-
3 O Return（返回）（第 16 頁）
wd 編序播放（第 16 頁）
您可返回選單的前一個畫面- 0 說明（第 19 頁）
顯示編序設定畫面-
顯示類比控制器（DUALSHOCK 2）的按鈕功
4 聲音選項（第 18 頁）
能- wf 重複播放（第 17 頁）
2 用方向按鈕選擇功能/ 顯示或變更 DVD 聲音選項-
重複播放光碟的所有標題､或某個標題或
qa 進入章（第 19 頁） 號碼圖標（第 19 頁）
5 角度選項（第 18 頁） 章-
3 按 ✕ 按鈕/ 顯示或變更 DVD 觀看角度-
您可選擇想要進入的章號碼-
wg 原作品 播放目錄（第 18 頁）
關於各項播放功能的詳細說明﹐請參考 qs . 後退
6 字幕選項（第 18 頁） 播放以 VR 模式錄製的 DVD-RW 光碟-
第 16 - 24 頁的說明- 倒回播放中章的開頭或上一個章的開頭-
顯示或變更 DVD 字幕選項- 選擇原作品或播放目錄內容進行播放-
qd > 前進
7 進入（第 18 頁） wh 解除
進到播放中的下一個章的開頭-
進入指定的標題號碼､章號碼或時間﹐然後開 取消已選擇的數字或播放模式-
始播放-
16 播放 DVD（續上頁）

您可利用控制介面設定各種播放模式- 解除所有的播放設定﹐返回正常播放
自己編排播放順序（編序播放） 4 用方向按鈕選擇想要播放的章號
用方向按鈕選擇 （解除）圖標後﹐按 ✕
按鈕- 您可依自己喜好編排標題及章的播放順序- 碼後﹐按 ✕ 按鈕/
使用 DVD 光碟選單 若要取消編序播放設定﹐請在步驟 3 選
您可開啟選單選擇某些 DVD 的光碟收錄內容-在 1 用方向按鈕選擇 （編序播
擇「消除」後﹐按 ✕ 按鈕-
播放這類 DVD 時﹐您可利用選單指定播放項目､ 從停播點恢復播放（重續播放） 放）圖標後﹐按 ✕ 按鈕/
字幕語言､聲音語言以及其他選項- 當播放停止時﹐本機將記錄光碟的停播位置﹐您 取消所有的編序播放設定
可選擇從此點恢復播放- 2 用方向按鈕選擇項目號碼後﹐按
✕ 按鈕/ 1 用方向按鈕選擇 （編序播
1 用方向按鈕選擇 （選單）或 1 播放時﹐按 a 按鈕停止播放/
放）圖標後﹐按 ✕ 按鈕/
（頂部選單）﹐按 ✕ 按鈕決 電視機螢幕會出現「選擇 [播放] 將會 3 用方向按鈕選擇標題號碼後﹐按
定/ 從停播點起繼續播-要從頭開始播放
✕ 按鈕/ 2 用方向按鈕選擇「全部消除」
時﹐請選擇 [停止] 後再選擇 [播 後﹐按 ✕ 按鈕/
螢幕上顯示 DVD 選單﹐但選單內容可能
因 DVD 而異-
放]-」的字樣﹐並顯示控制介面- 4 用方向按鈕選擇章號碼後﹐按 ✕
使用編序播放時進行隨機播放或重複播放
假如出現「禁止使用重續播放功能﹐下
按鈕/
2 用方向按鈕選擇您想要的項目後 次選擇播放時﹐將從頭開始播放-」的 • 編序播放搭配隨機播放
在執行編序播放時﹐使用方向按鈕選擇
按 ✕ 按鈕/ 字樣﹐則代表不能使用重續播放- 5 反覆步驟 2－4﹐選擇其他要播放 （隨機播放）圖標後﹐按 ✕ 按鈕即可開始隨
2 用方向按鈕之左右按鈕﹐選擇 的標題或章/ 機播放-當設定編序播放後使用隨機播放時﹐
您只能選擇「使用隨機播放」或「解除隨機播
返回到前一個畫面 N（播放）後﹐按 ✕ 按鈕執 6 按 START（開始）按鈕/ 放」等隨機播放選項-
用方向按鈕選擇 O（返回）後﹐按 ✕ 按鈕執
行-
行/ 開始編序播放- • 編序播放搭配重複播放

某些 DVD 可能不支援這項功能- 本機從步驟 1 的停播點起繼續播放- 在執行編序播放時﹐使用方向按鈕選擇

即使編序播放已經結束﹐您設定的播放順序依舊 （重複播放）圖標後﹐按 ✕ 按鈕即可開始重

取消停播點
存在-使用方向按鈕選擇 （編序播放）圖 複播放-當設定編序播放後使用重複播放時﹐
使用類比控制器(DUALSHOCK2) 在步驟 1 後選擇 x（停止）圖標﹐按 ✕ 按鈕-
標後﹐按 ✕ 按鈕-開啟編序設定畫面後﹐再按 您只能選擇「使用重複播放」或「解除重複播
解除重續播放 放」等重複播放選項-
START（開始）按鈕﹐即可再次進行相同的編序播
1 按 f 或 s 按鈕- 如果停播後恢復播放﹐DVD 播放裝置就進入重續
放- 關於隨機播放和重複播放的詳細內容﹐請參閱第
螢幕上顯示 DVD 選單﹐但選單內容可能 播放模式-在選擇重續播放時您無法使用 DVD 播 17 頁「以任意順序播放（隨機播放）」及「反覆
因 DVD 而異- 放裝置的許多專業設定-若要取消重續播放以便 改變或取消編序播放設定 持續播放（重複播放）」的說明-
調整各項設定﹐請選擇 x（停止）圖標後連按兩
2 用方向按鈕選擇您想要的項目後 次 ✕ 按鈕- 1 用方向按鈕選擇 （編序播 注意事項
• 在選擇編序播放進行播放時﹐您無法變更編序播放的各項
按 ✕ 按鈕- 注意事項
放）圖標後﹐按 ✕ 按鈕/ 設定-
• 設定編序播放後﹐將自動解除A-B重複播放-
• 某些 DVD 可能不支援重續播放功能-
注意事項 • 由於停止設定上的問題﹐實際繼續播放的位置可能會與停 2 用方向按鈕選擇想要變更的項目 • 某些DVD可能不支援編序播放功能-
• 畫面上僅會顯示被錄製於光碟中的標題號碼與章號碼-
• 某些 DVD 可能本身不具備選單- 播點有所出入-
• 出現下列情形時﹐將自動解除重續播放-
號碼後﹐按 ✕ 按鈕/ • 出現下列情形時﹐將自動停止編序播放：
• 部分 DVD 可能會將「選單」稱為「DVD 選單」､「標題 – 設定 A-B 重複播放-
– 設定編序播放或隨機播放時-
選單」或「標題」-
– 按 A（打開）按鈕﹐打開光碟托盤- 3 用方向按鈕選擇想要播放的標題
– 螢幕上顯示 DVD 光碟選單-
• 出現下列情形時﹐將自動解除編序播放：
– 按 1/RESET（再啟動）按鈕﹐令主機回到預備狀態-
確認播放設定 – 按主機背面的 MAIN POWER（主電源）按鈕﹐關閉電源- 號碼後﹐按 ✕ 按鈕/ – 按主機前面的 A（打開）按鈕﹐打開光碟托盤-
– 按 1/RESET（再啟動）按鈕﹐令主機回到預備狀態-
– 在播放途中選擇 x（停止）圖標後連按兩次 ✕ 按鈕-
播放時﹐用方向按鈕選擇 （時間顯示）圖 – 按主機背面的 MAIN POWER（主電源）按鈕﹐關閉電源-
標﹐然後按 ✕ 按鈕-目前設定的播放方式的圖
標即會顯示於螢幕右上方-
 17
在停止播放時設定隨機播放 結束重複播放
以任意順序播放（隨機播放） 重複播放指定部分（A-B 重複播
使用方向按鈕選擇 （隨機播放）圖標後﹐ 用方向按鈕選擇 （重複播放）圖標﹐然後
主機會自動依任意設定的隨機順序進行播放-使 按 ✕ 按鈕選擇想要的隨機播放模式後﹐再使用 按 ✕ 按鈕直至顯示出「解除重複播放」- 放）
用隨機播放時﹐每次的播放順序都會不同- 方向按鈕選擇 N（播放）圖標後﹐按 ✕ 按鈕﹐ 反覆不斷播放光碟的指定部分-
在播放過程中用方向按鈕選擇 （隨機播 即會開始隨機播放-
使用重複播放時進行編序播放或隨機播放
放）圖標後﹐按 ✕ 按鈕-
• 重複播放搭配編序播放
1 播放時﹐使用方向按鈕選擇
每按一次 ✕ 按鈕﹐都會依以下順序﹐於螢幕上 注意事項
顯示隨機播放模式-於選擇隨機播放模式後﹐即 在執行重複播放時﹐使用方向按鈕選擇 （A-B 重複播放）圖標後﹐設定
• 開始隨機播放後﹐將自動解除 A-B 重複播放-
會開始隨機播放- • 某些 DVD 可能不支援隨機播放功能- （編序播放）圖標後﹐按 ✕ 按鈕-並於設定 要重複播放部分的起點﹐按 ✕ 按
• 出現下列情形時﹐將自動解除隨機播放- 自己想要的播放順序後﹐按下 START（開始）
– 設定 A-B 重複播放- 按鈕﹐即可開始重複播放-當設定編序播放後 鈕/
標題隨機播放 CT
– 螢幕上顯示 DVD 光碟選單-
（以任意順序播放標題） 使用重複播放時﹐您只能選擇「使用重複播 完成起點的設定-

DVD
– 按主機前面的 A（打開）按鈕﹐打開光碟托盤-
放」或「解除重複播放」等重複播放選項--
章隨機播放
– 按 1/RESET（再啟動）按鈕﹐令主機回到預備狀態-
– 按主機背面的 MAIN POWER（主電源）按鈕﹐關閉電源- • 重複播放搭配隨機播放 2 播放時﹐使用方向按鈕選擇
（以任意順序播放章）
• 選擇章隨機播放時﹐最多可隨機播放被記錄在光碟中的 在執行重複播放時﹐使用方向按鈕選擇 （A-B 重複播放）圖標後﹐設定
200 個章-假如光碟中收錄了 200 個以上的章﹐那麼主 （隨機播放）圖標後﹐按 ✕ 按鈕﹐即可開始
機將隨機選擇 200 章- 要重複播放部分的終點﹐按 ✕ 按
解除隨機播放 重複播放- 當設定隨機播放後使用重複播放
（取消隨機播放） 時﹐您只能選擇「使用重複播放」或「解除重 鈕/
反覆持續播放（重複播放） 複播放」等重複播放選項- 完成終點的設定-開始 A-B 之間的重複
關於編序播放和隨機播放的詳細內容﹐請參閱第
使用重複播放﹐可重複播放 DVD 的所有標題或某 播放-
結束隨機播放 16 頁「自己編排播放順序（編序播放）」及第 17
個標題､章-
用方向按鈕選擇 （隨機播放）圖標﹐然後 頁「以任意順序播放（隨機播放）」的說明-
播放時用方向按鈕選擇 （重複播放）圖標 注意事項
按 ✕ 按鈕直至顯示「解除隨機播放」-
後﹐按 ✕ 按鈕- • 某些 DVD 可能不支援 A-B 重複播放功能-
每按一次 ✕ 按鈕﹐都會依以下順序﹐於螢幕上 在停止播放時設定重複播放 • 只能設定一個 A-B 重複播放-
使用隨機播放時進行編序播放或重複播放 • 只能指定一個標題中的某一部分﹐進行 A-B 重複播放-
顯示重複播放模式-於選擇重複播放模式後﹐即 使用方向按鈕選擇 （重複播放）圖標後﹐ • 出現下列情形時﹐將自動解除 A-B 重複播放-
• 隨機播放搭配編序播放 會開始重複播放- 按 ✕ 按鈕選擇想要的重複播放模式後﹐再使用 – 設定編序播放､隨機播放､或重複播放-
在執行隨機播放時﹐使用方向按鈕選擇 方向按鈕選擇 N（播放）圖標後﹐按 ✕ 按鈕﹐ – 停止播放-
（編序播放）圖標後﹐按 ✕ 按鈕-並於設定 光碟重複播放 即會開始隨機播放- – 螢幕上顯示 DVD 光碟選單-
自己想要的播放順序後﹐按下 START（開始） – 按主機前面的 A（打開）按鈕﹐打開光碟托盤-
（重複播放所有標題）
– 按 1/RESET（再啟動）按鈕﹐令主機回到預備狀態-
按鈕﹐即可開始隨機播放-當設定編序播放後 注意事項 – 按主機背面的 MAIN POWER（主電源）按鈕﹐關閉電源-
使用隨機播放時﹐您只能選擇「使用隨機播 標題重複播放 • 開始重複播放後﹐將自動解除 A-B 重複播放- • 設定 A-B 重複播放後﹐將自動解除編序播放､隨機播放
放」或「解除隨機播放」等隨機播放選項- （重複播放某個標題） • 某些 DVD 可能不支援重複播放功能- 以及重複播放-
• 隨機播放搭配重複播放 • 出現下列情形時﹐將自動解除重複播放-
- 設定 A-B 重複播放-
在執行隨機播放時﹐使用方向按鈕選擇 章重複播放 - 按主機前面的 A（打開）按鈕﹐打開光碟托盤-
（重複播放）圖標後﹐按 ✕ 按鈕﹐即可開始 （重複播放某個章） - 按 1/RESET（再啟動）按鈕﹐令主機回到預備狀態-
重複播放- 當設定隨機播放後使用重複播放 - 按主機背面的 MAIN POWER（主電源）按鈕﹐關閉電源-
時﹐您只能選擇「使用重複播放」或「解除重 解除重複播放
複播放」等重複播放選項- （取消重複播放）
關於編序播放和重複播放的詳細內容﹐請參閱第
16 頁「自己編排播放順序（編序播放）」及第 17
頁的「反覆持續播放（重複播放）」的說明-
18 播放 DVD（續上頁） DVD 播放裝置的設定和調整
您可利用控制介面操作 DVD﹐或調整 DVD 播放裝
播放 DVD-RW 時選擇原作品 播 置的各項設定-
顯示字幕 選擇播放一個特定場面
放目錄 請注意﹐並不是所有的功能都適用於所有的 DVD 插入一張附有字幕的 DVD﹐您可在播放時要求顯 您可指定標題或章的號碼﹐或者輸入想要播放的
光碟- 示或隱藏字幕-使用多種字幕的 DVD 時﹐則可 起始點的已經播放時間來選擇播放某個特定場
本機可以播放 DVD-RW（VR 模式）中﹐用 DVD 播
在播放時選擇所要的字幕- 面-
放機錄製的原創作品內容﹐並能播放在編輯原創
作品內容後而製造的播放目錄內容-當使用此類 更改聲音語言 用方向按鈕選擇 （字幕選項）﹐按 ✕ 按鈕
光碟時﹐您可事先選擇想要播放的標題類型- 利用章號碼選擇場面
在播放一張錄製多重語言（多重軌跡）的 D V D 決定-
請注意﹐您無法利用本機錄製或編輯播放內容- 播放時﹐用方向按鈕選擇想要的章號碼後﹐按 ✕
時﹐您可在播放時選擇要聽的語言-可選擇的聲 您可按鈕不斷改變字幕語言﹐並要求顯示或隱藏
另外﹐在選擇重續播放時﹐將無法使用或設定本 按鈕-
音語言因 DVD 而異- 字幕-可選擇的字幕種類會因為 DVD 而有所不
功能- 開始播放所選擇的章-
同-
用方向按鈕選擇 （聲音選項）圖標後﹐按 ✕ 按
停止播放後﹐用方向按鈕選擇 （原作品 通過標題號碼､章號碼或指定時間來選擇場面
鈕-
播放目錄）圖標後﹐按 ✕ 按鈕- 隱藏字幕
每按一次 ✕ 按鈕都會更改一次播放語言-
每按一次 ✕ 按鈕﹐都將切換選擇原作品或播放 用方向按鈕選擇 （字幕選項）圖標﹐然後按 1 播放時﹐用方向按鈕選擇 （進
目錄- 使用類比控制器（DUALSHOCK2） ✕ 按鈕直至顯示「字幕 關」-
入）圖標後﹐按 ✕ 按鈕/
• 原作品：播放原先錄製的內容-
按 R3 按鈕-
• 播放目錄：播放經編輯的內容-
每按一次 R3 按鈕都會更改一次播放語言- 使用類比控制器（DUALSHOCK2） 2 用方向按鈕選擇需要的項目後﹐
注意事項 按 L3 按鈕- 按 ✕ 按鈕/
注意事項
• 此選項的初期設定為播放目錄- 每按一次 R3 按鈕都會不斷改變字幕語言﹐並能 • 標題 = 標題號碼
• 某些錄製了多種語言的 DVD 會因為程式燒錄上的問題﹐
• 如果光碟未錄製播放目錄﹐則將播放原作品內容-您無法 要求顯示或隱藏字幕-可選擇的字幕種類會因為
而可能出現無法更改播放語言的情形- • 章 = 章號碼
選擇播放目錄-
• 播放中改變標題的行為﹐可能強制改變語言的播放設定- DVD 而有所不同- • C XX:XX:XX（或 T XX:XX:XX）
• 以 VR 模式錄製的 DVD-RW 光碟﹐您無法選擇相反方向的
• 在設定畫面的「聲音設定」中﹐將「Audio Digital Out」 = 章（或標題）的已經播放時間
慢動作播放- 隱藏字幕
的 DTS 選項設定為「關」時﹐即使播放錄有 DTS 音軌的
• 出現下列情形時﹐將自動解除「原作品」設定-
– 按主機前面的 A（打開）按鈕﹐打開光碟托盤-
DVD﹐您也無法選擇 DTS 進行播放- 按 L3 按鈕直至顯示「字幕 關」-
3 用方向按鈕選擇播放點後﹐按 ✕
– 按 1/RESET（再啟動）按鈕﹐令主機回到預備狀態-
– 按主機背面的 MAIN POWER（主電源）按鈕﹐關閉電源- 注意事項 按鈕/
• 以 VR 模式錄製在 DVD-RW 光碟上的內容必須經過最終化
更改觀看角度 • 假如您選擇的 DVD 並未收錄字幕﹐那麼就不會顯示字幕- 開始播放所選擇的場景-
操作才能在 PlayStation2 主機上觀看- • 某些附有字幕的 DVD 會因為程式燒錄上的問題﹐而可能
插入一張錄製多種角度（多角度）的 DVD 時﹐ 出現無法顯示字幕､改變字幕﹐或是隱藏字幕的情形-
您可在播放時更改取景的角度-例如﹐當您播放 • 部分 DVD 禁止隱藏字幕- 注意事項
• 字幕的可記錄種類及可記錄數量﹐會因為 DVD 而有所不 您無法指定章或標題的剩餘播放時間來選擇場面-（您只能
列車行走的場景時﹐您可選擇從列車的前頭､左
同- 指定已經播放時間-）
側窗戶､右側窗戶觀賞一路的風景但不需要中斷 • 播放中改變標題的行為﹐可能強制改變字幕的播放設定-
列車的行走-

用方向按鈕選擇 （角度選項）﹐按 ✕ 按鈕
決定-
每按一次 ✕ 按鈕﹐都會更改一次角度-

注意事項
• 角度的多少﹐會因為光碟和場景而有所不同-您只能選擇
被收錄在該場景下的角度﹐做不同感覺的觀賞-
• 某些錄製了多種角度的 DVD﹐會因為程式燒錄上的問題﹐
而可能出現無法更改角度的情形-
 19

顯示播放資訊 發現光碟的特殊場景（尋找）
尋找 3 1 用方向按鈕選擇 （設定）圖
您可隨時要求螢幕上顯示目前的標題號碼或章號 利用尋找功能可以快速尋找 DVD 的特殊場景- 尋找 2
標後﹐按 ✕ 按鈕/
碼﹐以及光碟的已經播放時間或剩餘播放時間- 您可透過前進尋找或後退尋找﹐運用三種尋找速 顯示各種設定圖標﹐選擇這些圖標﹐進
編序播放或隨機播放等播放模式的資訊﹐亦會於 度與慢動作播放等播放速度﹐掃描影像特定場 尋找 1 入下頁所示的各選單-
您選擇設定後﹐顯示於螢幕右上方- 景-於關閉控制介面後﹐則可利用類比控制器
（DUALSHOCK2）使用這項功能- 慢放 2 用方向按鈕選擇想要改變設定的
播放光碟或暫停播放時﹐用方向按鈕選擇
圖標後﹐按 ✕ 按鈕/
（時間顯示）圖標後﹐按 ✕ 按鈕-
1 播放時﹐用方向按鈕選擇 （尋
2 發現想要播放的場景後﹐放開 L2
每按一次 ✕ 按鈕﹐顯示內容都將如下改變- 顯示所選圖標的選單-
或 R2 按鈕/
找､快退）或 （尋找､快進） CT
標題 × 章 ×
恢復正常播放速度- 3 用方向按鈕選擇需要的選單項目
圖標後﹐按 ✕ 按鈕開始尋找/

DVD
（標題號碼和章號碼） 後﹐按 ✕ 按鈕/
在尋找時﹐按方向按鈕可以改變 注意事項
某些 DVD 禁止本項操作-
顯示所選的選單項目之各選項-
標題 × 章 × C XX:XX:XX 影像的掃描速度/
（目前章的已經播放時間）
按住 ✕ 按鈕的同時按方向按鈕﹐影像
4 用方向按鈕指定一個選項後﹐按
的掃描速度都將如下改變：
慢動作播放 ✕ 按鈕/
標題 × 章 × C-XX:XX:XX 播放時﹐用方向按鈕選擇 （相反方向慢放）或
（目前章的剩餘播放時間）
完成指定選項的設定-
尋找 3 （播放方向慢放）圖標後﹐按 ✕ 按鈕-
開始慢動作播放- 使用設定顯示選單後
標題 × 章 × T XX:XX:XX 若要保存播放時改變的設定﹐您必須先停止播放*
尋找 2 結束慢動作播放
（目前標題的已經播放時間） 或退出 DVD﹐然後再按主機前面的 1（預備）
用方向按鈕選擇 N（播放）圖標後﹐按 ✕ 按
RESET（再啟動）按鈕﹐或按主機背面的 MAIN
尋找 1 鈕-
標題 × 章 × T-XX:XX:XX POWER（主電源）按鈕關閉電源-
（目前標題的剩餘播放時間） 恢復正常播放速度-
請注意﹐若是在退出光碟前﹐即再度啟動主機或
慢放
關閉主機電源的話﹐則無法保存變更後的設定內
注意事項 使用設定顯示選單 容-
您可能無法要求顯示某些標題的剩餘播放時間-
2 發現想要播放的場景後﹐放開 ✕ 使用設定顯示選單﹐您可選擇恢復初期設定､調
* 包括在重續播放過程中停止播放-

按鈕/ 節畫質和聲音﹐並設定各種輸出端子等-您還可
顯示按鈕功能一覽表（說明） 選擇字幕語言和選單語言､設定視聽年齡限制等
恢復正常播放速度-
您可開啟標有類比控制器（DUALSHOCK2）各按鈕 級等-關於設定顯示的詳細內容﹐請參閱第 20－
功能的一覽表- 24 頁-
用方向按鈕選擇 （說明）圖標後﹐按 ✕ 按鈕- 使用類比控制器（DUALSHOCK2） 使用設定顯示選單前
即會顯示各按鈕功能的一覽表- 在選擇重續播放時﹐可能將無法開啟某些選單-
您可按 ✕ 按鈕﹐選擇顯示或隱藏該畫面- 1 播放時﹐按住 L2 或 R2 按鈕開 詳細將會於以後的介紹中仔細說明-至於重續播
始尋找/在尋找時﹐按方向按鈕 放模式的解除方法﹐請參閱第 16 頁的「解除重
續播放」-
可以改變影像的掃描速度/
按住 L2 或 R2 按鈕的同時按方向按鈕﹐
影像的掃描速度都將如下改變：
20 DVD 播放裝置的設定和調整（續上頁）

設定顯示選單 設定使用語言（語言設定）
設定顯示選單的構成如下所示-購買時的初期設定標有下線- 在「語言設定」裡﹐您可從各種語言中選擇畫面
顯示語言､DVD 聲音語言等-購買時的初期設定
語言設定（第 20-21 頁） 畫面設定（第 21 頁） 聲音設定（第 23-24 頁）
標有下線-
畫面顯示語言 繁體中文 電視機形式 16:9 聲音數碼輸出
英文 4:3 信箱形式
必須選擇設定顯示選單中的 （語言設定）圖標
DIGITAL OUT (OPTICAL) 開
4:3 全景掃描 後才能開始設定-詳細內容請參閱第 19 頁的「使
選單語言 英文 關
法文 DNR 關 用設定顯示選單」-
Dolby Digital 開
德文 DNR1 關
義大利文 DNR2 注意事項
DTS 開
西班牙文 • 如果您選擇了一種光碟中並未記錄的語言﹐那麼本機會自
輪郭強調 +2 關
荷蘭文 動替「選單」､「聲音」､「字幕」選擇一種記錄語言-
+1 MPEG 開 • 本機可能會因 DVD 的關係而無法在「選單」､「聲
丹麥文
0 音」､「字幕」上顯示您所選擇的語言-
瑞典文 關
–1
芬蘭文
挪威文
–2 聲音軌跡自動選擇模式 開 x 畫面顯示語言
葡萄牙文 情報顯示 開 關 選擇畫面的顯示語言-
俄文 關 +2 • 繁體中文
DVD 音量
中文 Progressive 開 • 英文
+1
日文 關
標準
韓文 x 選單語言
語言一覽 , 選擇 DVD 光碟選單的語言-
個人設定（第 21-23 頁）
聲音語言 與選單相同 在選擇重續播放時﹐將無法使用或設定本功能-
字幕語言 英文 暫停模式 自動 • 英文
法文 幀 • 法文
德文 • 德文
視聽年齡限制 地區 美國
義大利文 • 義大利文
其他（請參閱第 24 頁）
西班牙文 • 西班牙文
荷蘭文 等級 關
• 荷蘭文
丹麥文 8
• 丹麥文
瑞典文 7
芬蘭文 6
• 瑞典文
挪威文 5
• 芬蘭文
葡萄牙文 4 • 挪威文
俄文
3 • 葡萄牙文
中文 • 俄文
2
日文 • 中文
1
韓文
變更密碼 • 日文
聲音連動
• 韓文
語言一覽 ,
• 語言一覽*
* 選擇「語言一覽」時﹐可從語言一覽表中﹐選擇語言-
 21
x Audio（聲音語言） x DNR（Digital Noise Reduction） • 如果您誤將此選項設定為「開」並需要解除改設定時﹐請
設定電視機的螢幕（畫面設定） 在 DVD 放入主機內的狀態下﹐按主機前面的 1（預備）
選擇聲音軌跡語言- 此設定有助於減小畫面上影像的粗糙程度﹐提供
RESET（再啟動）按鈕﹐然後按住已插入控制器端子 1
在選擇重續播放時﹐將無法使用或設定本功能- 您可設定所連接的電視機的縱橫比及其它顯示選 更為清晰的圖像- 的類比控制器（DUALSHOCK2）的 START（開始）按鈕﹐
• 英文 項-購買時的初期設定標有下線- • 關：通常的標準設定- 直至 DVD 畫面出現-當DVD開始播放時﹐「Progressive」
• 法文 • DNR1：增強影像的清晰度- （逐行掃描）的設定會變成「關」-DVD 畫面也會正常顯

• 德文 從設定顯示選單中選擇 （畫面設定）圖標-詳 • DNR2：增強影像的清晰度-（最高清晰度）

示-您也可通過版本畫面將「Progressive」（逐行掃描）
設定為「關」-詳細內容請參閱第 9 頁-
• 義大利文 細內容請參閱第 19 頁的「使用設定顯示選單」-
• 如果播放的 DVD-RW 光碟內容是以VR模式錄製的﹐則無法
• 西班牙文 注意事項 使用逐行掃描功能-
x 電視機形式 • DNR2 比 DNR1 更有效地減小圖像顆粒的粗糙程度﹐但有 • DVD 圖像可以包含幀速率不同的視頻來源的素材和電影來
• 荷蘭文
設定您所連接的電視機形式- 時可能出現殘像-如果出現這種情況﹐請選擇「關」- 源的素材-當以逐行掃描播放電影來源的素材時﹐由於經
• 丹麥文 • DNR 會由於 DVD 的緣故而出現難以發揮功能的現象-
• 瑞典文
在選擇重續播放時﹐將無法使用或設定本功能- 過了圖像轉換過程﹐有些影像可能顯得不自然-出現這種 CT
• 將「Progressive」（逐行掃描）設定為「開」時﹐DNR 功 情況時﹐請將「Progressive」（逐行掃描）設定為「關」
• 16︰9︰當您連接一台寬螢幕電視或具備寬螢幕

DVD
• 芬蘭文 能會自動關閉- 後﹐選擇隔行方式觀看-
模式的普通電視機時的標準設定-
• 挪威文
• 4:3 信箱形式：使用普通電視機時的標準設 x 輪郭強調
• 葡萄牙文
• 俄文
定-顯示寬螢幕影像時﹐畫面上下將會出現黑 設定畫面輪郭的銳利柔和-數值愈高﹐代表輪郭 設定個人資訊（個人設定）
邊- 愈鮮明銳利- 利用個人設定﹐您可選擇視聽年齡限制等級並調
• 中文
• 4:3 全景掃描：使用普通電視機時﹐寬螢幕規 • +2 整其它特殊功能-
• 日文
格的影像會自動顯示在整個螢幕上﹐但左右兩 • +1 購買時的初期設定標有下線-
• 韓文
邊的部份將被切割- • 0︰通常的標準設定- 從設定顯示選單中選擇 （個人設定）圖標-詳
• 語言一覽*
* 選擇「語言一覽」時﹐可從語言一覽表中﹐選擇語言- • -1 細內容請參閱第 19 頁的「使用設定顯示選單」-
16:9 • -2
x 字幕語言 x 暫停模式
選擇字幕語言- x 情報顯示 設定暫停模式時的圖像狀態-
在選擇重續播放時﹐將無法使用或設定本功能- 設定在螢幕上顯示或隱藏播放的狀況資訊- • 自動：可以無抖動地顯示出含有許多動態部分
• 英文 • 開：播放 DVD 時﹐螢幕會數秒間顯示播放資 的圖像-通常的標準設定-
• 法文 4:3 信箱形式 訊- • 幀：能表現高解析度的靜止圖框影像﹐但無法
• 德文 • 關：不顯示播放資訊- 確實表現動態移動-
• 義大利文
• 西班牙文 x Progressive（逐行掃描） x 視聽年齡限制
• 荷蘭文 這種顯示圖像的方式通過一次刷新就完成所有行 根據各地區的視聽者年齡等因素﹐限制某些 DVD
• 丹麥文 的掃描﹐因此在大多數情況下能顯示比隔行方式 的播放權限-您可利用視聽年齡限制功能來控制
4:3 全景掃描
• 瑞典文 時更穩定､更清晰而且無閃爍的圖像- 主機的視聽等級-
• 芬蘭文 在選擇重續播放時﹐將無法使用或設定本功能- 在選擇重續播放時﹐將無法使用或設定本功能-
• 挪威文 • 開：連接支援逐行掃描的電視機時﹐選擇此項
• 葡萄牙文 設定-
• 俄文 • 關：連接普通電視機時﹐選擇此項設定-
• 中文
注意事項 注意事項
• 日文 • 某些 DVD 會自動以預先設定之電視機縱橫比展開播放- • 要使用逐行掃描功能﹐您必須使用支援逐行掃描（480p）
• 韓文 • 若將「Progressive」設定為「開」﹐則電視機的縱橫比會 的電視機﹐並使用 PlayStation2 專用影像色差連接線
• 聲音連動*1 被自動設定為「16:9」﹐且無法擅自變更- SCPH-10100 G（選購品）連接主機-
• 語言一覽*2 • 如果您沒有使用必要的設備而將「Progressive」（逐行掃
描）設定為「開」時﹐可能會造成畫質下降或圖像消失-
*1 選擇「聲音連動」後﹐則字幕會隨著所選擇的聲音語言而
變化-
*2 選擇「語言一覽」時﹐可從語言一覽表中﹐選擇語言-
22 DVD 播放裝置的設定和調整（續上頁）

設定視聽年齡限制 3 用方向按鈕選擇「地區」後﹐按 6 用方向按鈕選擇一個限制播放的 變更密碼

✕ 按鈕/ 等級後﹐按 ✕ 按鈕/
從設定顯示選單中選擇 （個人設定）圖標-
1 在「設定視聽年齡限制」的步驟
出現地區一覽表- 視聽年齡限制設定完成-
1 用方向按鈕選擇「視聽年齡限
數值越小﹐代表等級越嚴格-
2 時用方向按鈕選擇「變更密
制」後﹐按 ✕ 按鈕/ 碼」後﹐按 ✕ 按鈕/
如果尚未登錄密碼 顯示變更密碼的畫面-
顯示登錄密碼的畫面-
2 用方向按鈕選擇一個數字後﹐按
✕ 按鈕/
重複此過程﹐輸入一個四位數密碼-
4 用方向按鈕選擇一個地區作為設 為確認無誤﹐請再輸入一次該密碼-
地區代碼一覽表
定視聽年齡限制等級的標準後﹐ 密碼變更完畢-
按 ✕ 按鈕/ 地區 代碼 地區 代碼
播放受視聽年齡限制保護的光碟
如果已經登錄了密碼 選擇「其他」時﹐請參照右表的「地區 英國 GB 中國 CN
顯示確認密碼的畫面- 代碼一覽表」來選擇地區代碼- 義大利 IT 丹麥 DK 1 放入光碟/
用方向按鈕選擇第一個字母後﹐按右方 開始播放-當播放到受視聽年齡限制的
印度尼西亞 ID 德國 DE
向按鈕-再按方向按鈕選擇第二個字母 位置時﹐畫面上會顯示出字句來確認是
後﹐按 ✕ 按鈕- 澳大利亞 AT 日本 JP
否要暫時變更視聽年齡限制的等級-
荷蘭 NL 挪威 NO

加拿大 CA 菲律賓 PH
2 用方向按鈕選擇「是」後﹐按 ✕
按鈕/
韓國 KR 芬蘭 FI
2 用方向按鈕選擇一個數字後﹐按 新加坡 SG 法國 FR
顯示確認密碼的畫面-
✕ 按鈕/ 3 用方向按鈕輸入數字後﹐按 ✕ 按
瑞士 CH 比利時 BE
重複此過程﹐輸入一個四位數密碼- 鈕/
出現設定地區､視聽年齡限制等級､以 5 用方向按鈕選擇「等級」後﹐按
瑞典 SE 香港 HK

西班牙 ES 馬來西亞 MY 重複此過程來輸入一個四位數密碼-

及改變密碼的畫面- ✕ 按鈕/ 開始播放-
泰國 TH 俄羅斯 RU
出現等級選項一覽- 停止播放後﹐視聽年齡限制將會自動恢
臺灣 TW
復為原始設定-
 23
如果忘記了密碼 x Dolby Digital（杜比數碼 AC-3） x MPEG
設定聲音選項（聲音設定）
選擇使用 DIGITAL OUT(OPTICAL)（數碼輸出光 選擇使用 DIGITAL OUT(OPTICAL)（數碼輸出光
1 出現確認密碼的畫面時按 SELECT 您可根據播放條件或使用的裝置調整聲音設定-
購買時的初期設定標有下線-詳細內容請參閱第
纖）端子傳送 Dolby Digital（杜比數碼 AC-3） 纖）傳送 MPEG 信號-
信號- • 開：當本機連接在支援 MPEG 的音響設備上時
（選擇）按鈕/ 19 頁的「使用設定顯示選單」- • 開：當本機連接內建 Dolby Digital（杜比數 選擇此項設定-
出現刪除密碼的畫面- 碼 AC-3）解碼器的音響設備上時選擇此項設 如果本機並未連接支援 MPEG 的音響設備﹐請
從設定顯示選單中選擇 （聲音設定）圖標- 定- 勿將本選項設定「開」-假如您選擇錯誤﹐在
2 用方向按鈕選擇一個數字後﹐按 如果本機並未連接內建 Dolby Digital（杜比 播放支援 MPEG 的光碟時﹐喇叭會發出刺耳的
✕ 按鈕/ x 聲音數碼輸出 數碼 AC-3）解碼器的音響設備﹐請勿將本選項 劇烈雜音（或發不出聲音）﹐更可能會損壞到
重複此過程來輸入四位數號碼 使用數碼輸出光纖連接線（選購品）將下列音響 設定「開」- 假如您選擇錯誤﹐在播放支援 您的耳朵及喇叭-
Dolby Digital（杜比數碼 AC-3）的光碟時﹐ • 關：當本機連接的音響設備並未支援 MPEG 時
CT
「7444」-如此﹐原先的舊密碼就會被 設備連接至 PlayStation2 主機背面的 DIGITAL

DVD
OUT (OPTICAL)（數碼輸出光纖）端子時﹐您可改 喇叭會發出刺耳的劇烈雜音（或發不出聲 選擇此項設定-
自動刪除-並顯示登錄新密碼的畫面-
變音頻信號的輸出方式- 音）﹐更可能會損壞到您的耳朵及喇叭-
x 聲音軌跡自動選擇模式
3 按照「設定視聽年齡限制」步驟 • 具備數碼輸出端子的數碼接收器（擴大機）- • 關：當本機連接的音響設備並未內建 D o l b y
播放錄有多種音頻信號（PCM､Dolby Digital 或
• 內建 Dolby Digital､DTS 或 MPEG 解碼器的 Digital（杜比數碼 AC-3）解碼器時選擇此項
2 的方法登錄一個新密碼/ DTS）或者 MPEG AUDIO 信號的 DVD 時﹐本機的
音響設備- 設定-
DVD 播放系統將主動選擇最高音質（音頻符號最
• DAT（數碼音頻錄音帶）或 MD（迷你光碟）唱 多）的音軌進行播放-
注意事項 機- x DTS 在選擇重續播放時﹐將無法使用或設定本功能-
• 選擇沒有視聽年齡限制的 DVD 時﹐不需要特地修改或刪
關於連接的詳細內容﹐請參閱第 7 頁- 選擇使用 DIGITAL OUT(OPTICAL)（數碼輸出光 • 開：優先選擇-
除亦可正常播放-
• 假如您沒有設定密碼﹐那麼就無法變更視聽年齡限制的設 纖）端子傳送 DTS 信號- • 關：不需優先選擇-
定- 在選擇重續播放時﹐將無法使用或設定本功能-
x DIGITAL OUT(OPTICAL)（數碼輸出光纖）
• 某些 DVD 可能因為 DVD 本身內容的緣故﹐在播放前強制
選擇是否使用 DIGITAL OUT(OPTICAL)（數碼輸出 • 開：當本機連接在內建 DTS 解碼器的音響設備 注意事項
要求您輸入密碼-
上時選擇此項設定- • 若將本項目設定為「開」﹐可能會造成聲音語言遭到強制
• 某些設定了視聽年齡限制的 DVD 可能無法進行編序播放､ 光纖）傳送聲音信號-
改變-這是因為「聲音軌跡自動選擇模式」的設定優先於
隨機播放﹐重複播放或 A-B 重複播放- 開啟「系統設定」後選擇的設定內容會自動反映 如果本機並未連接內建 DTS 解碼器的音響設
「語言設定」選單中的「聲音語言」設定-（參考第 23
到本項目- 備﹐請勿將本選項設定「開」-假如您選擇錯 頁的說明）
• 開：使用數碼輸出光纖連接線（選購品）傳送 誤﹐在播放支援「DTS」的光碟時﹐喇叭會發出 • 如果您在「聲音設定」選單下﹐將「DIGITAL OUT
解除視聽年齡限制
時-通常選擇此項設定- 刺耳的劇烈雜音（或發不出聲音）﹐更可能會 (OPTICAL)」項目設定為「開」而「DTS」卻設定為
停止播放 DVD 後﹐在「設定視聽年齡限制」的步 「關」﹐那麼即使將「聲音軌跡自動選擇模式」設定為
當您選擇「開」時﹐可修改「Dolby 損壞到您的耳朵及喇叭-
驟 6 將「等級」設定為「關」- 「開」﹐亦無法自動播放音頻信號最多的 DTS 信號-
Digital」（杜比數碼 AC-3）､「DTS」或 • 關：當本機連接的音響設備並未內建 DTS 解碼
在選擇重續播放時﹐將無法解除視聽年齡限制- • PCM､DTS､Dolby Digital（杜比數碼 AC-3）﹐以及 MPEG
「MPEG」的設定- 器時選擇此項設定- 信號的音頻信號數都相同的情形﹐那麼本機會依照 PCM､
• 關：不通過數碼輸出光纖端子傳送聲音信號 Dolby Digital（杜比數碼 AC-3）､DTS､MPEG 的音軌順
序開始播放-
時﹐選擇此項設定-
• 某些 DVD 的信號優先播放順序是固定的-在播放這類 DVD
時﹐您無法透過將「聲音軌跡自動選擇模式」設定為
注意事項 「開」來優先播放 DTS､Dolby Digital（杜比數碼 AC-
選擇「關」時﹐您就無法修改「Dolby Digital」（杜比數碼 3）或 MPEG 信號-
AC-3）､「DTS」或「MPEG」的設定-
24 DVD 播放裝置的設定和調整（續上頁）

x DVD 音量
假如 DVD 音量的輸出功率過低﹐您可以選擇調整
DVD 音量-改變設定時必須先將「DIGITAL OUT
(OPTICAL)」（數碼輸出光纖）設定為「關」-
• +2︰調高音量-（最大音量）
• +1︰調高音量-
• 標準：正常音量-通常選擇此項設定-

注意事項
某些 DVD 在選擇「+1」､「+2」後﹐會出現音質失真的現
象-若出現這種情況﹐請選擇「標準」設定-

警告
如果您將音量調得過高﹐可能會傷害耳朵或損壞接收器
（放大機）-

本機採用的著作權保護技術乃是受美國專利權及
智慧財產權（知識產權）等相關法律保護﹐由
Macrovision 和其他著作權人共同保有之認證技
術-非經 Macrovision 正式許可﹐禁止擅自使
用-未獲得 Macrovision 特殊授權﹐嚴禁在一般
家庭等視聽觀賞用途以外的地方使用-禁止自行
拆卸或分解本機-
 故障檢修 25
, 光碟未正確放入托盤- , 即使所使用的電視機支援遂行掃描﹐在以遂行 , 檢查主機及接收器（擴大機）間﹐AV 連接線
, 主機是否被設定在暫停狀態- 掃描方式播放時﹐有些影像顯得不自然- （音頻 視頻一體化）的連接是否正確-
, 嘗試用其他 AV 連接線連接- 請將「Progressive」（逐行掃描）設定為 , 嘗試用其他 AV 連接線連接-
, 未使用支援逐行掃描的電視機﹐或者使用非 「關」﹐然後選擇隔行掃描方式觀看- , 檢查喇叭的連接和設定-
在使用 PlayStation2 主機 PlayStation2 專用影像色差連接線時﹐將 請同時參閱喇叭的使用說明書-
時﹐如果操作上遭遇到困難﹐ 「Progressive」（逐行掃描）設定為「開」
當播放寬螢幕畫面的 DVD 時﹐無法配合電視
, 檢查您是否在接收器（擴大機）上選擇了適當
了- 的輸入頻道-請同時參閱接收器（擴大機）
請閱讀下面的文章﹐以便找到 請不要打開光碟托盤或退出 DVD-在 DVD 放
機規格變更螢幕尺寸
的使用說明書-
, 某些 DVD 的螢幕尺寸是事先被固定的-
問題的可能原因/ 入主機內的狀態下﹐按主機前面的 1（預
, 確認主機已經直接連接在電視機上-（請不
, 主機被設定在暫停狀態-
備） RESET（再啟動）按鈕﹐然後按住類比 , 主機正在執行尋找或慢動作播放（當播放 DVD
要在主機及電視機之間連接選台器或接收器 CT
1 如果您遭遇到下列困難﹐請閱讀以下的故 控制器（DUALSHOCK2）的 START（開始）按 時）
（擴大機）

DVD 其他資訊
鈕﹐直至顯示 DVD 畫面-若 DVD 開始播放﹐ , 您正在播放 DTS 音軌的音樂 CD 或 DVD 光
障檢修指南﹐以方便您解決問題或恢復正 , 某些電視機的螢幕尺寸是固定､無法修改
則代表「Progressive」將被設定為「關」﹐ 碟-
常操作/如果無法解決問題﹐請就近與保 的-
並將顯示出圖像- 您也可選擇版本畫面將 當主機連接的是不帶內建 DTS 解碼器的音響
證書上記載的消費者服務中心聯繫/
「Progressive」（逐行掃描）設定為「關」- 播放以 VR 模式錄製的 DVD-RW 光碟時﹐畫 設備時﹐請不要播放 DTS 音軌-（請參閱第
2 請檢查交流電源線是否正確連接在主機 詳細內容請參閱第 9 頁- 面上出現「播放功能受到限制﹐無法進行播 23 頁-）
上﹐插頭並確實插在牆壁插座上/同時也 放-」的字句﹐然後畫面變成一片藍色/ , 當主機連接支援 DIGITAL OUT (OPTICAL)（數
畫面出現雜痕
檢查電視機（錄影機）或其他周邊設備的 , 您正在播放的光碟可能包含「只能複製一次」 碼輸出光纖）的音響設備時﹐未正確修改系統
, 擦拭光碟-
連接方法是否有任何錯誤不當的地方/ 的內容-利用「只能複製一次」之功能錄製 設定-（參考第 6 頁的說明）
, 主機因濕氣過重而結露（參考第 2 頁）
的﹐支援 CPRM 的 DVD-RW 光碟上的影像是
, 是否把主機放在不穩定的地方-請把主機放
無法進行播放的-詳細內容請參閱第 3 頁的
電源 置在平穩地方後使用-並切勿搖晃或震動主
「播放 DVD-R/DVD-RW/DVD+R/DVD+RW 光碟的
音質不良
機- , 擦拭光碟-
無法接通電源 注意事項」-
, 當從主機發出的影像信號透過錄影機傳送到電 , 把主機放在不穩定的地方-
, 確認交流電源線是否正確連接- 視機時﹐防盜版技術誤導致某些 DVD 影像失 請把主機放置在平穩地方後使用-並切勿搖
, 主機是否沒有打開電源- 請按主機背面的 真-當播放 DVD 時﹐請把主機直接連接到電 聲音 晃或震動主機-
MAIN POWER（主電源）按鈕﹐接通電源- 視機上-（參考第 6 頁的說明） , 主機因濕氣過重而結露-（參考第 2 頁的說
, 未使用支援逐行掃描的電視機﹐或者使用非 無聲 明）
PlayStation2 專用影像色差連接線時﹐將 , 檢查是否已用 AV 連接線（音頻 視頻一體 , 正在播放支援 DTS 的 CD 或 DVD 光碟-
畫面 化）將本機正確連接在電視機（或錄影機）
「Progressive」（逐行掃描）設定為「開」 主機必須要先連接一套內建 DTS 解碼器的音
無畫面 了- 上- 響設備﹐才能夠順利播放支援 DTS 的光碟-
, 檢查是否已用 AV 連接線（音頻 視頻一體 請不要打開光碟托盤或退出 DVD-在 DVD 放 , 確認主機及電視機（或錄影機）都已經接通電
化）將本機正確連接在電視機（或錄影機） 入主機內的狀態下﹐按主機前面的 1（預 源-
播放支援 Dolby Digital（杜比數碼 AC-3）
上- 備） RESET（再啟動）按鈕﹐然後按住類比 , 確認已經替電視機設定正確的影像輸入頻
道-
的 DVD（數碼影音光碟）時﹐很難享受到環繞
, 確認主機及電視機（或錄影機）都已經接通電 控制器（DUALSHOCK2）的 START（開始）按
, 確認音量是否適中及是否按了「靜音」按 音效的震撼臨場感
源- 鈕﹐直至顯示 DVD 畫面-若 DVD 開始播放﹐
鈕- , 檢查喇叭的連接和設定-
, 確認已經替電視機設定正確的影像輸入頻 則代表「Progressive」將被設定為「關」﹐
, 確認 AV 連接線（音頻 視頻一體化）的端 請同時參閱喇叭的使用說明書-
道- 並將顯示出圖像- 您也可選擇版本畫面將
子是否並沒有牢靠插入- , 某些 DVD 即使支援 Dolby Digital（杜比數
, AV 連接線（音頻 視頻一體化）的端子是否 「Progressive」（逐行掃描）設定為「關」-
, 確認放入的是本機可以對應的光碟-（請參 碼 AC-3）﹐但信號的輸出傳送仍可能並未採
並沒有牢靠插入- 詳細內容請參閱第 9 頁-
考第 3 頁的說明）- 用完全的 5.1 聲道﹐而或許是單聲道或立體
, 確認您放入的是一片本機可以對應的光碟（請
, 確認放入光碟時﹐標籤之面是否朝上（播放面 聲-
參考第 3 頁的說明）-
, 確認放入光碟時﹐標籤之面是否朝上（播放面 朝下）-
朝下）-
26 故障檢修（續上頁） 規格
只能聽到中置喇叭的聲音 1 顯示燈閃爍紅燈﹐且無法操作主機 無法隱藏字幕 一般規格
, 某些光碟的聲音可能只能從中置喇叭發出- , 顯示燈閃爍紅燈代表目前主機出現「錯誤」而 , 某些 DVD 可能無法選擇隱藏字幕- 電源
110 V AC﹐50/60 Hz
無法操作-請清除堆積在通風孔的污垢後將
功率消耗
本機搬到涼爽的地方降低機內溫度-
操作 等本機恢復到預備狀態後才重新使用-
當播放 DVD 時﹐無法改變角度 47 W
尺寸（大約）
, 該片 DVD 並未錄製多種角度（多角度）可供
301 × 78 × 182 mm（寬 × 高 × 深）
無法操縱控制器 無法打開光碟托盤 選擇- 重量（大約）
, 確認控制器是否正確連接在主機上- , 確認交流電源線是否正確連接- , 您播放的是一片禁止變更角度的 DVD- 2.0 kg
, 確認類比控制器（DUALSHOCK2）的操作模式 , 主機是否沒有打開電源- 操作溫度
無法選擇 圖標 5˚C - 35˚C
是否已配合軟件正確設定-（參考第 11 頁 請按主機背面的 MAIN POWER（主電源）按
, 請將 DVD-RW（VR 模式）光碟放入主機-（請 激光二極管比率
的說明） 鈕﹐接通電源-
參閱第 18 頁-） • 材料︰GaAlAs
, 嘗試用其他控制器重新操作- • 波長︰l=650/780 nm

無法啟動軟件
主機前面的輸入 輸出
, 確認您放入的是一片本機可以對應的光碟- DVD 光碟的操作 控制器端子（2）
（請參考第 3 頁的說明） MEMORY CARD（記憶卡）插口（2）
, 確認放入光碟時﹐標籤之面是否朝上（播放面 播放 DVD 光碟時﹐主機無法從開頭開始播放 USB 連接埠（2）

朝下）- , 已選擇重續播放-
開始播放前﹐請選擇 x（停止）圖標後按兩 主機背面的輸入 輸出
, 光碟未正確放入托盤-
次 ✕ 按鈕-（請參閱第 16 頁-） AV MULTI OUT（AV 多重輸出）端子（1）
, 是否有結露現象-（參考第 2 頁的說明） DIGITAL OUT (OPTICAL)（數碼輸出光纖）端子（1）
, 擦拭光碟- , 某些光碟在選擇播放會自動先顯示標題選單
EXPANSION BAY（擴充槽）（1）
, 嘗試啟動其他光碟- 或 DVD 選單-
, 確認是否已對正在播放的 DVD-R 或 DVD-RW 附屬品
進行了最終化操作- 參考第 4 頁的說明-
即使選擇了 DVD 標題亦無法開始播放
, 視聽年齡限制機能禁止該光碟的播放- 選購品
無法將遊戲資料保存到 PlayStation2 專用
SCPH-10010 G 類比控制器（DUALSHOCK2）
MEMORY CARD（記憶卡）(8MB) 或 MEMORY
SCPH-10020 G PlayStation2 專用 MEMORY
CARD（記憶卡） 自動停止播放
CARD（記憶卡）(8MB)
, 確認 PlayStation2 專用 MEMORY CARD（記 , 光碟可能設定了自動暫停- SCPH-10040 G PlayStation2 專用直立架
憶卡）(8MB) 或 MEMORY CARD（記憶卡）是 當播放這類光碟時﹐本機會自設定的信號點起 SCPH-10060 G S 視頻連接線
停止播放- SCPH-10090 G PlayStation2 專用（對
否已經插在主機上-
戰）多重連接器
, 確認您是否依遊戲指示正確操作- SCPH-10100 G PlayStation2 專用影像色
請同時參閱遊戲說明書- 無法進行停止､尋找､慢動作播放､編序播 差連接線
, 確認 PlayStation2 專用 MEMORY CARD（記 SCPH-10110 G PlayStation2 專用橫放架
放､隨機播放或重複播放等操作/
SCPH-10420 G PlayStation2 專用 DVD 遙
憶卡）(8MB) 或 MEMORY CARD（記憶卡）內 , 某些光碟可能無法執行上述操作- 控器
尚有足夠的空白記憶體- SCPH-1020 HI MEMORY CARD（記憶卡）
, 嘗試用其他 PlayStation2 專用 MEMORY CARD SCPH-110 類比控制器（DUALSHOCK）
（記憶卡）(8MB) 或 MEMORY CARD（記憶卡） 無法改變聲音軌跡語言/
再度執行保存- , 該片 DVD 並未錄製多種聲音語言可供選擇-
, 您播放的是一片禁止變更聲音語言的 DVD- 本公司保留在不予通知情況下﹐變更設計或規格之權利-

主機無法正確動作
, 靜電等的發生可能影響主機的內部電路而導致
無法改變字幕語言
動作出現異常-請按 MAIN POWER（主電源）
, 該片 DVD 並未錄製多種字幕可供選擇-
按鈕關閉本機電源﹐然後再重新接通-
, 您播放的是一片禁止變更字幕的 DVD-
 術語解說 維修責任 27
章（參考第 20 頁） 另外﹐DVD 還具備多重角度（多角度）､多重語 視聽者年齡限制（第 21 頁） 請參考附在主機盒內﹐適用各國家､各地區﹐接
DVD 中所使用的﹐電影或音樂的收錄單位﹐可收 言及視聽年齡限制等多樣的先進功能- 根據各國對各年齡層的影像播放標準而限制 DVD 受保證維修前的必要保證書-
錄時間比「標題」短-一個「標題」大致被分為 播放機能的一項特殊技術- 當有效起動此功能
數個「章」-每個章都有所謂的「章號碼」﹐以 時﹐光碟的播放會因為光碟內容而出現無法播
DVD-RW
方便您選擇想要播放的章- 放､刪除暴力場景或用其他畫面代替的情形-
DVD-RW 是和 DVD VIDEO 光碟尺寸相同的可讀寫
光碟-DVD-RW 能以兩種模式錄製：VR 模式和視
Dolby Digital（杜比數碼 AC-3）（參考第 7 頻模式- 逐行掃描（第 21 頁）
頁､第 23 頁） • 視頻模式－兼容 DVD-VIDEO 規格﹐經最終化處 與通過交替掃描各行來顯示一幀圖像的隔行方式
由杜比實驗室開發的數碼聲音壓縮技術-此技術 理後﹐大多數的 DVD 播放機都可播放其收錄之 相比﹐逐行掃描一次刷新就能顯示完整的一幀圖
支援 5.1 聲道環繞音效-採用此格式時﹐後置 內容。但以 VR 模式錄製的 DVD-RW 則只能使 像﹐即隔行方式每秒可以顯示 30 幀﹐而逐行掃 CT
喇叭為立體聲﹐並另外分離出低音喇叭聲道-透 用對應 DVD-RW 的 DVD 播放機播放- 描每秒則可以顯示 60 幀-通過逐行掃描可以提

其他資訊
過杜比數碼 (AC-3) 影院音響系統﹐杜比數碼 • VR（視頻錄製）模式－可以使用選擇視頻模式時 高整體圖像的質量﹐而且使靜像､文字和水平線
(AC-3) 可提供具備相當高品質數碼聲音的 5.1 無法使用的各種編序和編輯功能- 顯得更鮮明-
分離聲道-因為所有聲道的信號數據完全分離錄
製並以數碼方式處理﹐所以能實現良好的聲道分 DVD+RW 標題（參考第 18 頁）
離效果- DVD+RW（念「加 RW」）是可讀寫光碟-DVD+RW 光 不論是為收錄電影等影像信號的影音光碟或為收
碟採用了對應 DVD 視頻格式的錄製格式- 錄專輯等音樂信號的音樂光碟﹐在 DVD 中﹐電影
DTS（參考第 7 頁､第 23 頁） 或音樂的收錄最長單位- 每個標題都有所謂的
由杜比實驗室開發的數碼聲音壓縮技術-此技術 「標題號碼」﹐以方便您選擇想要播放的標題-
DVD 圖像素材
支援 5.1 聲道環繞音效-採用此格式時﹐後置喇 DVD 圖像素材可分為兩類：視頻來源的素材和電
叭為立體聲﹐並另外分離出低音喇叭聲道-DTS 影來源的素材-視頻來源的素材以每秒 30 幀（60
可提供具備相當高品質數碼聲音的 5.1 分離聲 場）的速率錄製﹐一般指各種電視節目-電影來
道-因為所有聲道的信號數據完全分離錄製並以 源的素材以每秒 24 幀的速率錄製﹐大多數電影
數碼方式處理﹐所以能實現良好的聲道分離效 底片屬於這一類-有些 DVD 既錄有視頻來源的素
果- 材﹐又錄有電影來源的素材-

DVD（參考第 14 頁） MPEG 聲音格式（參考第 23 頁）

大小和音樂 CD 相同﹐最高可存放 8 小時高畫質 由 ISO/IEO 制定的﹐用於壓縮數位（數碼）聲音
動態影片的高密度光學光碟- 信號的國際標準檔案格式-
單層單面的 DVD 的儲存容量為 4.7GB﹐相當於普
通 CD 的 7 倍容量-而雙層單面的 DVD 容量為
8.5GB；單層雙面 DVD 為 9.4GB；雙層雙面則為 多重角度（多角度）（參考第 18 頁）
17GB- 某些 DVD 會在同一個場景上錄製多種角度（攝
畫面採用數碼壓縮技術的世界標準之一的 MPEG 2 影機角度）-
格式﹐可將圖像壓縮成原先容量的 1/40-此外還
採用了依照圖像的狀況而改變數據壓縮比的可變 多語言功能（第 18､20 頁）
速率編碼技術- 某些 DVD 會準備多種的聲音語言及字幕語言-
在音效上更支援了杜比數碼 AC-3 環繞音效及
DTS﹐讓您可在家中欣賞到更逼真的環繞音效-
“ ”, “PlayStation”, “DUALSHOCK“ and “ ” are registered trademarks and “ ” is a trademark of Sony Computer Entertainment Inc.
“SONY” and “ ” are registered trademarks and is a trademark of Sony Corporation.

“ ”､“PlayStation”､“DUALSHOCK”和“ ”為 Sony Computer Entertainment Inc. 之註冊商標-

“ ”則為該公司之商標-
“SONY”和“ ”為 Sony Corporation 之註冊商標-“ ”則為該公司之商標-

Printed in China