Automated Globe Valves

BOA-H Mat P

Type Series Booklet

Legal information/Copyright
Type Series Booklet BOA-H Mat P

All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
edited or processed for any other purpose, nor otherwise transmitted, published or made available to a
third party without the manufacturer's express written consent.
Subject to technical modification without prior notice.

© KSB SE & Co. KGaA, Frankenthal 29/07/2019

 Contents

Contents
Control Valves / Measurement Valves ............................................................................................................ 4
Automated Globe Valves to DIN/EN ......................................................................................................................................... 4
BOA-H Mat P ........................................................................................................................................................................ 4
Main applications........................................................................................................................................................... 4
Fluids handled ................................................................................................................................................................ 4
Operating data............................................................................................................................................................... 4
Valve body materials...................................................................................................................................................... 4
Design details ................................................................................................................................................................. 4
Product benefits ............................................................................................................................................................. 4
Product information ...................................................................................................................................................... 4
Related documents ........................................................................................................................................................ 5
Pressure/temperature ratings ........................................................................................................................................ 5
Maximum permissible closing pressures ....................................................................................................................... 5
Technical data ................................................................................................................................................................ 5
Materials ......................................................................................................................................................................... 7
Dimensions and weights................................................................................................................................................ 8
Notes on installation...................................................................................................................................................... 9
Chemical resistance chart ............................................................................................................................................ 10

3
 Control Valves / Measurement Valves
Automated Globe Valves to DIN/EN

Control Valves / Measurement Valves Valve body materials

Overview of available materials
Automated Globe Valves to DIN/EN
Material Material number Temperature limit
EN-GJS-400-18-LT 5.3103 ≤ 350 °C

BOA-H Mat P
Design details

Design

Globe valve:
▪ Straight-way pattern with horizontal seat
▪ Throttling plug ≤ DN 100
▪ On/off disc ≥ DN 125
▪ Spring-loaded PTFE V-packing ≤ 250 °C
▪ Graphite gland packing ≤ 350 °C
▪ Flanges to DIN EN 1092-2 Type 21
▪ Leakage rate A
▪ Exterior coating: blue, RAL 5002
Actuators (technical data refers to basic configuration):
▪ Spring-to-close or air-to-close design (on request)
Max. control pressure 6 bar
Mechanical or inductive limit switches
Main applications
▪ Hot-water heating systems Variants
▪ Air-conditioning systems Globe valve:
▪ Valve disc with PTFE gasket (≤ 200 °C)
▪ Boiler feed applications
▪ Other flange designs
▪ Boiler recirculation
▪ High-temperature resistant paint (grey aluminium)
▪ Chemical industry
▪ Certification to customer specification
▪ Process engineering
▪ Heat recovery systems
▪ Sugar industry Product benefits
▪ Internal parts made of high-grade stainless steel (1.4571)
for long service life and high chemical resistance
Fluids handled ▪ Risk of leakage minimised by fully confined bonnet gasket
▪ High-temperature hot water ▪ Available with two types of stem seal: maintenance-free
▪ Saturated steam PTFE V-packing (< 250 °C) or adjustable graphite gland
packing (450 °C)
▪ Thermal oil
▪ Pneumatic actuator with 3/2 directional control valve and
▪ Liquids not chemically or mechanically aggressive to the either inductive or mechanical limit switches. Actuating
valve materials forces of up to 11 kN with spring-to-close design or up to
26 kN with air-to-close design.

Operating data
Product information
Operating properties
Characteristic Value Product information as per Regulation No.
Nominal pressure PN 16/25 1907/2006 (REACH)
Nominal size DN 20 - 150 For information as per chemicals Regulation (EC) No. 1907/2006
7136.1/05-EN

Max. permissible pressure [bar] 25 (REACH), see http://www.ksb.com/reach.

Min. permissible temperature [°C] ≥ -10
Max. permissible temperature [°C] ≤ +350
Product information as per Pressure Equipment
Selection as per pressure/temperature ratings (ð Page 5) Directive 2014/68/EU (PED)
The valves satisfy the safety requirements of Annex I of the
European Pressure Equipment Directive 2014/68/EU (PED) for
fluids in Groups 1 and 2.

4 BOA-H Mat P
 Control Valves / Measurement Valves
Automated Globe Valves to DIN/EN

Product information as per Directive 2014/34/EU (ATEX) Related documents

ATEX-compliant version on request.
Information/documents
Document Reference number
Flow characteristics 7150.4
BOA-CVE H operating manual 7525.81
Electric actuators, operating manual 7525.83
Typical tender for BOA-H Mat E 7135.521

Pressure/temperature ratings
Test pressure and operating pressure

PN Material Shell test Leak test (seat) Permissible operating pressure

With water [bar]1)2)
Tests P10 and P11 to Test P12, leakage rate A to [°C]
DIN EN 12266-1 DIN EN 12266-1
[bar] [bar] -10 to 200 250 300 350
+120
16 EN-GJS-400-18-LT 24 ∆p 16 14,7 13,9 12,8 11,2
25 EN-GJS-400-18-LT 37,5 ∆p 25 23 21,8 20 17,5

Maximum permissible closing pressures

Fluid approaches the valve disc in closing direction; p2 = 0 bar

DN Actuator: PA-N300 PA-N540

Spring range [bar]: 1,6 - 2,8 2,0 - 3,7
Control pressure required [bar]: 2,9 3,8
Stem seal: Graphite gland PTFE V-packing Graphite gland PTFE V-packing
packing packing
Stroke [mm] KVs value [m3/h] [bar] [bar] [bar] [bar]
20 7,5 8,3 25,0 25,0 - -
25 7,5 13,0 25,0 25,0 - -
32 11,0 19,9 25,0 25,0 - -
40 12,0 27,1 24,3 25,0 - -
50 13,5 42,0 15,6 17,2 25,0 25,0
65 17,0 75,1 8,6 9,8 24,8 25,0
80 20,5 116,7 5,5 6,2 16,4 17,1
100 25,5 172,3 3,3 3,6 10,4 10,8
125 33,0 270,0 - - 6,4 6,7
150 38,0 393,0 - - 4,3 4,5

Technical data

Technical data of globe valve

Technical data of BOA-H Mat P
Characteristic Value
Nominal pressure PN 16, PN 25
Valve characteristic Open/Close
Leakage class Leakage rate A to DIN EN 12266-1, test P12
Permissible pressure 16 bar, 25 bar
7136.1/05-EN

Flanged ends PN 16 and PN 25 to DIN EN 1092-2

Fluid temperature -10 to +350 °C

1) Intermediate temperatures can be derived by linear interpolation.

2) Static load

BOA-H Mat P 5
 Control Valves / Measurement Valves
Automated Globe Valves to DIN/EN

Technical data of actuators

Actuators
Characteristic Actuator type
PA-N300 PA-N540
Diaphragm area [cm2] 300 540
Max. control pressure [bar] 6 6
Stroke [mm] 32 50
Total volume [l] 1,0 3,7
Stroke volume [l] 0,6 2,2
Air supply connection NPT 1/4 NPT 1/2
Weight without handwheel [kg] 13 32
Weight with handwheel [kg] 16 51
Ambient temperature -30 to +80 °C3)
Function Either spring-to-close or spring-to-open

The maximum operating pressure of the actuators is 6 bar.

For trouble-free operation, the control air (6 bar max.) required for actuation must meet the following requirements:
▪ Instrument air quality to DIN ISO 8573.1 with a maximum particle size of 5 µm, a maximum particulate concentration of 5 mg/
m3 and Quality Class 3.
▪ Water content: max. dew point 2 °C (Quality Class 4); a different dew point applies if the actuator is operated at a high-
altitude site or at low ambient temperatures.
▪ Oil content: max. 25 mg of oil in 1 m3 of air (Quality Class 5) to DIN ISO 8573.1. If the actuator is operated at temperatures
below 0 °C, dry control air must be used.
Contact the manufacturer if other control air qualities or special control media are to be used.
Requirements on ambient air:
▪ The actuators comply with Category C2 of DIN EN 12944-2.
▪ Contact the manufacturer if the actuators are to be used in an aggressive ambient atmosphere.

7136.1/05-EN

3) The temperature is limited by the materials of the diaphragm and sealing elements.

6 BOA-H Mat P
 Control Valves / Measurement Valves
Automated Globe Valves to DIN/EN

Materials

45-6

809 545

920.1/2 416

950
722

545
902
PTFE V-packing
920.3

545
161

411 45-6

200
545
561

350

100 461
474

BOA-H Mat P Graphite gland packing

List of components

Part No. Description Material Material number

100 Body EN-GJS-400-18-LT 5.3103
161 Body bonnet EN-GJS-400-18-LT 5.3103
200 Stem X20Cr13 1.4021+QT
350 Valve disc X20Cr13 1.4021+QT
411 Bonnet gasket CrNiSt graphite -
416 V-packing Carbon PTFE -
45-6 Stuffing box screw X5CrNi18-10 1.4301
461 Gland packing Graphite -
474 Thrust ring X5CrNi18-10 1.4301
545 Bearing bush Sint A50 -
722 Top flange Steel -
809 Actuator - -
902 Stud CK 35 V -
920.1 Hexagon nut Galvanised steel -
920.2 Slotted round nut Galvanised steel -
920.3 Hexagon nut C35 -
950 Spring X5CrNi18-10 1.4301
7136.1/05-EN

BOA-H Mat P 7
 Control Valves / Measurement Valves
Automated Globe Valves to DIN/EN

Dimensions and weights

Dimensions and weights of BOA-H Mat P globe valve

Fig. 1: Dimensions
BOA-H Mat P

Dimensions and weights

PN DN b d2 d6 D h1 h2 k l n [kg]
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 20 16 M39 14 105 153,5 101,0 75 150 4 6,3
25 16 M39 14 115 164,5 107,0 85 160 4 6,9
32 18 M39 19 140 216,0 146,0 100 180 4 10,4
40 18 M39 19 150 226,0 151,0 110 200 4 11,6
50 20 M39 19 165 227,0 144,5 125 230 4 13,8
65 20 M50 19 185 272,5 180,0 145 290 4 22,3
80 22 M50 19 200 284,0 184,0 160 310 8 28,4
100 24 M50 19 220 328,0 218,0 180 350 8 38,4
125 26 M50 19 250 384,5 259,5 210 400 8 60,5
150 26 M50 23 285 403,5 261,0 240 480 8 83,0
25 20 16 M39 14 105 153,5 101,0 75 150 4 6,3
25 16 M39 14 115 164,5 107,0 85 160 4 6,9
32 18 M39 19 140 216,0 146,0 100 180 4 10,4
40 18 M39 19 150 226,0 151,0 110 200 4 11,6
50 20 M39 19 165 227,0 144,5 125 230 4 13,8
65 20 M50 19 185 272,5 180,0 145 290 8 22,3
80 22 M50 19 200 284,0 184,0 160 310 8 32,4
100 24 M50 23 235 335,5 218,0 190 350 8 42,4
125 26 M50 28 270 394,5 259,5 220 400 8 67,5
150 26 M50 28 300 411,0 261,0 250 480 8 91,5

Mating dimensions as per standard

7136.1/05-EN

Face-to-face lengths: DIN EN 558/1, ISO 5752/1

Flanges: DIN EN 1092-2, flange type 21-2
Flange facing: DIN EN 1092-2, type B

8 BOA-H Mat P
 Control Valves / Measurement Valves
Automated Globe Valves to DIN/EN

Dimensions and weights of pneumatic actuator types PA-N300 and PA-N540

Fig. 2: Pneumatic actuator

Dimensions and weights

Type A B D M4) [kg]
[mm] [mm] [mm] [mm]
PA-N300 656 347 284 600 13
PA-N540 865 534 380 600 43

Notes on installation
▪ Flow through globe valves is in the direction of the
embossed arrow on the valve body as standard. An
alternating direction of flow is permissible; however, if
fluid flow does not comply with the flow direction arrow
on the valve body, the actual throughflow will be lower
than the maximum throughflow indicated on the name
plate.
▪ Recommendation: A strainer fitted upstream of the globe
valve will further enhance the globe valve's functional
reliability.
Installation positions:

Fig. 3: Actuator installation positions

7136.1/05-EN

4) Min. clearance for removal

BOA-H Mat P 9
 Control Valves / Measurement Valves
Automated Globe Valves to DIN/EN

Chemical resistance chart Fluids handled

The information provided in this chemical resistance chart is Oil/water emulsion6) ✔
based on experience, the Dechema lists as well as Jet fuel ✔
manufacturer information. Corrosion resistance is largely
dependent on the operating conditions, temperatures and Petrol ✔
concentrations. Hydroabrasive wear in fluids containing solids Kerosene ✔
is not covered in this list. The information provided in this list is
for orientation only. Warranty claims may not be asserted on Chemical resistance chart for refrigerants
the basis of this list.
Fluids handled
Symbols key Ammonium hydroxide (≤ 30 %, ≤ 25 °C) ✔
Symbol Description Glycol (ethylene glycol) ✔
✔ The fluid handled is not normally aggressive toward Propylene glycol ✔
the materials. Water/glycol mixture (20 % ≤ c ≤ 50 %, ≤ 90 °C) ✔
✖ The fluid handled is aggressive toward the materials. Inorganic cooling brine, pH 7.5 ✔
Valve cannot be used.
Chemical resistance chart for thermal oils
○ The materials and/or the valve can only be used
under certain operating conditions. Please enquire Fluids handled
accordingly, stating the operating conditions such as Synthetic thermal oils ✔
concentration, temperature, pH and composition of
Mineral-based thermal oils ✔
the fluid handled.
Chemical resistance chart for acids
Chemical resistance chart for water5)
Fluids handled
Fluids handled
Hydrochloric acid ✖
Brackish water6) ✖
Sulphuric acid (pure, technical, concentrated) ✖
Service water6) ✔
Sulphurous acid ✖
Fire-fighting water ✔
Fatty acid ✖
Chlorinated water (≤ 0.6 mg/kg) ✔
Nitric acid ✖
Deionised water (demineralised water)7) ○
Distilled water7) ○ Chemical resistance chart for cleaning agents
Boiler feed water ✔ Fluids handled
Hot water ✔ Lye for bottle rinsers (e.g. P3) ≤ 80 °C6) ○
High-temperature hot water ✔ Lye for metal cleaning ≤ 80 °C 6)
○
Condensate ✔
Oil-free cooling water ✔ Chemical resistance chart for steam
Oil-containing cooling water ✔ Fluids handled
Ozonised water (≤ 0.5 mg/kg) ✔ Saturated steam ✔
Pure water ✔
Seawater ✖ Chemical resistance chart for other fluids
6) Fluids handled
Scale-forming water ○
Raw water 6)
✔ Sodium hydroxide (≤ 50 %, ≤ 50 °C) ○
Partly desalinated water 7)
○ Natural gas ✔
Oil-containing compressed air ✔
Fully desalinated water7) ○
6)8) Dry chlorine (≤ 30 °C) ✔
Municipal waste water ✔
Ammonia ✔
Industrial waste water6)9) ✔
Butane (liquefied gas) ✔
Chemical resistance chart for oils (aromatic content 5 mg/kg) Aqueous glycerine ✔
Carbon dioxide (gas) ✔
Fluids handled
Carbon dioxide (aqueous solution) ✖
Vegetable oils ✔
Mineral oils ✔
Synthetic oils ✔
Crude oil ✔
Petroleum ✔
Light fuel oil ✔
7136.1/05-EN

Linseed oil ✔

5) General criteria for water to be handled by products made of non-alloyed materials: pH > 7; chlorides (Cl-) < 150 mg/kg;
chlorine (Cl) < 0.6 mg/kg. Other factors to be considered: hardness, carbon dioxide content (CO₂), oxygen (O₂) and dissolved
substances. Contact KSB if limits are exceeded.
6) Without solids
7) Can only be used for installations and the respective water quality as specified in the VdTÜV 1466 or VDI 2035 guidelines. A
pH ≥ 9.5 and an oxygen content of ≤ 0.02 mg/l are also recommended.
8) Biologically treated
9) Non-corrosive, non-abrasive

10 BOA-H Mat P
 29/07/2019
7136.1/05-EN

KSB SE & Co. KGaA

Johann-Klein-Straße 9 • 67227 Frankenthal (Germany)
Tel. +49 6233 86-0
www.ksb.com