Torsion Axles

Table of
Contents

500-2200 lb. Torsion Axle 2

2700-3700 lb. Torsion Axle 5
4000-6000 lb. Torsion Axle 9
6100-7000 lb. Torsion Axle 13
10,000 lb Torsion Axle 17

Order Forms can be found at https://axistrailerproducts.com/axles/

 500—2,200 TA
500—2,200 lb. Torsion Axles

Typical Industries & Applications include:

Axis Trailer Products, LLC. ● Elkhart, IN. ● Phone 574.264.7955 ● axistrailerproducts.com

• Enclosed Trailers
• Cargo
• Motorcycle cargo
• Open Utility Trailers
• Landscape
• Equipment
• Sport Utility—motorcycle, quad and
tri wheel units.
• Construction
• Marine
• Boat
• Personal watercraft
• Specialty Trailers
• 1/2 Axles
• Airport Cargo
• Custom application

Mounting and Dimensions

In order to minimize tire wear and axle performance issues Axis recommends that the
following guidelines be followed when specifying axles within the 500 to 2,200 lb. The
difference between hub face and outside of bracket dimensions.

Type Flange Minimum Maximum

Straight Spindle No Brake Flange 13” 21.750”

Straight Spindle Flanged 13” 21.750”

Hub Face
Outside of Bracket

OPTIONS:

Available Finishes
include:
• Powder Coating
Standard Camber • Galvanized
• Wet Paint

Drop Center Camber

Quality Driven…
Customer Focused
2 Order Forms can be found at https://axistrailerproducts.com/axles/
 500—2,200 TA

500—2,200 lb. Torsion Axles

Axis Trailer Products, LLC. ● Elkhart, IN. ● Phone 574.264.7955 ● axistrailerproducts.com

Low-Profile (Standard) High-Profile

TORSION DYNAMIC DATA (from bracket top to center of spindle)
(1” higher than Standard)
Start Bracket No Load Full Load Shock Load
Angle Type

Standard 5.46 3.52 2.52

45 Degree Down
Hi-Profile 6.33 4.38 3.38

Standard 3.52 1.22 0.18

22.5 Degree Down
Hi-Profile 4.38 2.09 1.04

Standard 2.26 -0.08 -1.08

10 Degree Down
Hi-Profile 3.13 0.79 -0.21
Inboard Mount Outboard Mount Standard 1.22 -1.08 -2.00
0 Degree
Hi-Profile 2.09 -0.21 -1.14

Standard 0.18 -2.00 -2.83

10 Degree Up
Hi-Profile 1.04 -1.14 -1.97

Standard -1.08 -3.02 -3.70

22.5 Degree Up
Hi-Profile -0.21 -2.16 -2.83

HUBS (All Parts (w/AP) Includes—Bearings, Seal, Dust Cap, Wheel Nuts & Grease)
AXIS P/N w/AP AXIS P/N Bolt Pattern Description
Race Only

702320500000 770412804412 4 on 4 H-100-S

702322200000 770412705509 5 on 4-1/2 H-150-S Small Flange

702323500000 770412805512 5 on 4-1/2 H-151-S Large Flange

702325200000 771412507410 4 on 4 HD-700-A 7” Drum for Hydraulic Brake

702326200000 771412505510 5 on 4-1/2 HD-700-C 7” Drum for Hydraulic Brake

702327200000 770412207410 4 on 4 HD-DX7-4 7” Drum for Electric Brake

702327800000 770412207510 5 on 4-1/2 HD-DX7-5 7” Drum for Electric Brake

Quality Driven…
1Contact Axis Product Service and Sales Department to Order

Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
3
 500—2,200 TA
500—2,200 lb. Torsion Axles
BRAKES HUB HARDWARE

Axis Trailer Products, LLC. ● Elkhart, IN. ● Phone 574.264.7955 ● axistrailerproducts.com

AXIS P/N Description AXIS P/N Description
770512307200 7" Electric Brake Left Hand 766251467590 DL-200 Double-Lip Seal for 1” Spindle

770512407200 7" Electric Brake Right Hand 766251226700 DL-220 Double-Lip Seal for 1-1/16” Spindle

770512307500 7” Electric Brake w/ Park Left Hand 764254446490 L-44649 Bearing for 1-1/16” Spindle

770512407500 7” Electric Brake w/ Park Right Hand 764254446430 L-44643 Bearing for 1” Spindle

795513307210 7" Hydraulic Brake Left Hand 770413247600 Press in Stud for Idler Hub / 1/2”-20
795513407210 7" Hydraulic Brake Right Hand 770991100000 Screw-in Stud / 1/2”-20

785452213000 21—3 Grease Cap for Plain Spindle

770963130000 21-41 Grease Cap for Saf-T-Lube Spindle

786721408200 1/2”-20 Cone Wheel Nut

770963110000 85-1 Rubber Plug for Saf-T-Lube Grease Cap

770963120000 5-101 Tang Washer for SAF-T-LUB

786930200000 "O"--Washer for Standard Spindle for Use with Standard Spindle

786722016140 1-14 Slotted Jam Nut

786940000000 1/8” x 1-3/4” Cotter Pin for Use with Standard Spindle

786930000000 "D" Washer for Use with SAF-T-LUB Spindle

SIDE HANGER KITS

AXIS P/N Description
787855091000 # 22 Left Hand Hanger (1)

787855092000 # 22 Right Hand Hanger (1)

Left Hand Side Mount Hanger
750711910160 5/8—18 x 1.5” Bolt (4)

750721912181 5/8—18 Lock Nut (4)

750730035800 5/8—Flat Washer (4)

WHEEL & TIRE ASSEMBLIES
AXIS P/N DESCRIPTION WHEEL DIA. TYPE LOAD SLR PSI MAX LOAD
RANGE CAP. (LBS)
751060364204 4 on 4” White Wheel 4.80—8 Bias B 7.9 60 590

751060552204 5 on 4.5” White Wheel 5.70—8 Bias B 8.7 50 715

75106725204 4 on 4” White Mods 4.80—8 Bias B 7.9 60 590

75106725205 5 on 4.5” White Mods 4.80—8 Bias B 7.9 60 590

751050028307 4 on 4” White Spoke 4.80 x 12 Bias B 9.5 60 780

751050030307 4 on 4” White Spoke 4.80 x 12 Bias C 9.5 90 990

751050031307 5 on 4.5” White Spoke 4.80 x 12 Bias C 9.5 90 990

751050034307 4 on 4” White Spoke 5.30 x 12 Bias B 10.2 55 840

751050035307 5 on 4.5” White Spoke 5.30 x 12 Bias C 10.2 80 1045

Quality Driven…
1Contact Axis Product Service and Sales Department to Order

Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
4
 2,700—3,700 lb. Torsion Axles

2,700—3,700 TA
Typical Industries & Applications include:
• Recreational Vehicle Trailers
• Enclosed Trailers
• Cargo
• Vehicle
• Race Vehicle
• Open Utility Trailers
• Landscape
• Equipment

● Axis Trailer Products, LLC. ● Elkhart, IN. ● Phone 574.264.7955 ● axistrailerproducts.com

• Sport Utility—motorcycle, quad and
tri wheel units.
• Construction
• Construction Equipment
• Dump Trailer
• Marine
• Boat
• Personal watercraft
• Pontoon Boat
• Agricultural Equipment
• Feed & Grain
• Spreaders
• Transport
• Specialty Trailer
• 1/2 Axles
• Custom Application

Mounting and Dimensions

In order to minimize tire wear and axle performance issues Axis recommends that the following guidelines
be followed when specifying axles within the 2,700 to Type Flange Minimum Maximum
3,700 lb. The difference between hub face and out-
Straight Spindle No Brake Flange 13” 23.625”
side of bracket dimensions.
Straight Spindle Flanged 13” 23.625”

OPTIONS:

Available Finishes
include:
• Powder Coating
Standard Camber • Galvanized
• Wet Paint

Drop Center Camber

Quality Driven…
Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
5
 2,700—3,700 lb. Torsion Axles
2,700—3,700 TA

TORSION DYNAMIC DATA (from bracket top to center of spindle)

Low-Profile (Standard) High-Profile
(1” higher than Standard) Start Bracket No Load Full Load Shock Load
Angle Type

Standard 6.01 4.06 3.06

45 Degree Down
Hi-Profile 6.76 4.81 3.81

Standard 4.06 1.77 0.72

22.5 Degree Down
Hi-Profile 4.81 2.52 1.47

Standard 2.81 0.47 -0.53

Axis Trailer Products, LLC. ● Elkhart, IN. ● Phone 574.264.7955 ● axistrailerproducts.com

10 Degree Down
Hi-Profile 3.56 1.22 0.22

Standard 1.77 -0.53 -1.46

Inboard Mount Outboard Mount 0 Degree
Hi-Profile 2.52 0.22 -0.71

Standard 0.72 -1.46 -2.29

10 Degree Up
Hi-Profile 1.47 -0.71 -1.54

Standard -0.53 -2.48 -3.15

22.5 Degree Up
Hi-Profile 0.22 -1.73 -2.40

HUBS (All Parts (w/AP) Includes—Bearings, Seal, Dust Cap, Wheel Nuts & Grease)

AXIS P/N w/AP Description AXIS P/N w/AP Description AXIS P/N Bolt Pattern
Race Only

702331100000 H-545 Hub for Plain Spindle 702331200000 H-545 Hub for SAF-T-LUB Spindle 770412705510 5 on 4.5”

702332100000 H-5475 Hub for Plain Spindle 702332110000 H-5475 Hub for SAF-T-LUB Spindle 770412705512 5 on 4.75”

702332400000 H-550 Hub for Plain Spindle 702332410000 H-550 Hub for SAF-T-LUB Spindle 770412705511 5 on 5.0”

702332700000 H-555 Hub for Plain Spindle 702332710000 H-555 Hub for SAF-T-LUB Spindle 770412705513 5 on 5.5”

702333000000 H-655 Hub for Plain Spindle 702333100000 H-655 Hub for SAF-T-LUB Spindle 770412710610 6 on 5.5”

702336100000 HD-545 for Plain Spindle 702336200000 HD-545 for SAF-T-LUB Spindle 770412110510 5 on 4.5”

702337100000 HD-5475 for Plain Spindle 702337200000 HD-5475 for SAF-T-LUB Spindle 770412110512 5 on 4.75”

702337400000 HD-550 for Plain Spindle 770412110511 5 on 5.50”

702337700000 HD-555 for Plain Spindle 770412110513 5 on 5.50”

702337700000 HD-655 for Plain Spindle 770412110513 6 on 5.50”

702338600000 HD-700B for Plain Spindle (Hydraulic Only) 770412507510 5 on 4.5”

1Contact Axis Product Service and Sales Department to Order

Quality Driven…
Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
6
 2,700—3,700 lb. Torsion Axles

2,700—3,700 TA
BRAKES HUB HARDWARE
AXIS P/N Description AXIS P/N Description
770512310300 10” Electric Brake Left Hand 766251254800 DL-350 Double Lip Seal

● Axis Trailer Products, LLC. ● Elkhart, IN. ● Phone 574.264.7955 ● axistrailerproducts.com

770512410300 10” Electric Brake Right Hand 764254446490 L44649 Outer Tapered Roller Bearing

770512310320 10” Electric Brake w/Park Left Hand 770963120000 5-101 Tang Washer for SAF-T-LUB

770512410320 10” Electric Brake w/Park Right Hand 786930200000 "O"--Washer for Standard Spindle for Use with Standard Spindle

776513310300 10” Hydraulic Brake Left Hand 786722016140 1-14 Slotted Jam Nut
776513410300 10” Hydraulic Brake Right Hand 786940000000 1/8” x 1-3/4” Cotter Pin for Use with Standard Spindle
796513310320 10” Hydraulic Brake Fee Backing Left Hand
786721408200 1/2” - 20 Cone Wheel Nut
796513410320 10” Hydraulic Brake Free Backing Right Hand
770963130000 21-41-01 Grease Cap for Use with SAF-T-LUB Spindle
796513310360 10” Hydraulic Brake Free Backing w/Park Left Hand
770963110000 85-1 Rubber Plug for SAF-T-LUB Grease Cap
796513410360 10” Hydraulic Brake Free Backing w/Park Right Hand
770413247700 2” Press-In Stud for Idler Hubs
795513307210 7” DX Hydraulic Brake Left Hand
770413247800 2 1/2” Press-In Stud for Idler Hubs & Brake Drums
795513407210 7” DX Hydraulic Brake Right Hand
785452213000 Grease Cap 21-3 for Use with Standard Spindle
702338054500 10” Disc Brake w/ All Parts
786930000000 "D" Washer for Use with SAF-T-LUB Spindle

764254681490 L68149 Inner Tapered Roller Bearing

SIDE HANGER KIT

AXIS P/N Description

787855101000 #35 Side Hanger Left Hand (1)

787855102000 #35 Side Hanger Right Hand (1)

750711910160 5/8” - 18 x 1.5” Bolt Zinc (4)

780721912181 5/8” - 18 Nut Zinc (4)

Left Hand Side Mount Hanger 750730035800 5/8” Washer (4)

Quality Driven…
1Contact Axis Product Service and Sales Department to Order

Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
7
 2,700—3,700 lb. Torsion Axles
2,700—3,700 TA

WHEEL & TIRE ASSEMBLIES

AXIS P/N DESCRIPTION WHEEL DIA. TYPE LOAD SLR PSI MAX LOAD
RANGE CAP. (LBS)
751050440644 ST175/80 D13 5 on 4.5” 13” Bias C 11.2 50 1360

751050470007 ST205/75 R14 5 on 4.5” 14” Radial C 12.1 50 1760

751050453620 ST215/75—14 5 on 4.5” 14” C 12.4 50 1870

751050473007 ST205/75 R15 5 on 4.5” 15” Radial C 12.6 50 1820

751050474007 ST225/75 R15 5 on 4.5” 15” Radial C 13 50 2150

Axis Trailer Products, LLC. ● Elkhart, IN. ● Phone 574.264.7955 ● axistrailerproducts.com

Quality Driven…
Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
8
 Axis Trailer Products, LLC ● Elkhart, IN.
4,000—6,000 lb. Torsion Axles
Typical Industries & Applications include:
• Recreational Vehicle Trailers
• Enclosed Trailers
• Cargo
• Vehicle
• Race Vehicle (Stacker)
• Open Utility Trailers
• Landscape
• Equipment

4,000—6,000 TA
• Construction
• Construction Equipment
• Dump Trailers
• Marine
• Boat
• Personal watercraft
• Pontoon Boat
• Agricultural Equipment
• Feed & Grain
• Spreaders
• Transport
• Specialty Trailer

● Phone 574.264.7955 ● axistrailerproducts.com

• 1/2 Axles
• Custom Application

Mounting and Dimensions

In order to minimize tire wear and axle performance issues Axis recommends that the
following guidelines be followed when
Type Flange Minimum Maximum
specifying axles within the 4,000 to 6,000
lb. The difference between hub face and Straight Spindle No Brake Flange 15” 23.625”

outside of bracket dimensions. Straight Spindle Flanged 15” 23.625”

OPTIONS:

Available Finishes
include:
• Powder Coating
Standard Camber • Galvanized
• Wet Paint

Drop Center Camber

Quality Driven…
Customer Focused
9 Order Forms can be found at https://axistrailerproducts.com/axles/
● axistrailerproducts.com

4,000—6,000 lb. Torsion Axles

Low-Profile (Standard) High-Profile

TORSION DYNAMIC DATA (from bracket top to center of spindle)
(1” higher than Standard)
Start Bracket No Load Full Load Shock Load
Angle Type

Standard 6.01 4.06 3.06

45 Degree Down
Hi-Profile 6.76 4.81 3.81

Standard 4.06 1.77 0.72

22.5 Degree Down
Hi-Profile 4.81 2.52 1.47
Axis Trailer Products, LLC ● Elkhart, IN. ● Phone 574.264.7955 00—6,000 TA

Standard 2.81 0.47 -0.53

10 Degree Down
Hi-Profile 3.56 1.22 0.22
Inboard Mount Outboard Mount
Standard 1.77 -0.53 -1.46
0 Degree
Hi-Profile 2.52 0.22 -0.71

Standard 0.72 -1.46 -2.29

10 Degree Up
Hi-Profile 1.47 -0.71 -1.54

Standard -0.53 -2.48 -3.15

22.5 Degree Up
Hi-Profile 0.22 -1.73 -2.40

HUBS (All Parts (w/AP) Includes—Bearings, Seal, Dust Cap, Wheel Nuts & Grease)
AXIS P/N w/AP AXIS P/N Description Bolt Pattern
Race Only

702361110000 770412712610 H-1206 Hub for SAF-T-LUB Spindle 6 on 5.5”

702366100000 770412112610 HD-1206 Drum for Plain Spindle 6 on 5.5”

702366200000 770412112610 HD-1206 Drum for SAF-T-LUB Spindle 6 on 5.5”

702362100000 770412712810 H-1208 Hub for Plain Spindle 8 on 6.5”

702362200000 770412712810 H-1208 Hub for SAF-T-LUB Spindle 8 on 6.5”

770412719160 H-1208 Hub w/ 9/16” Studs 8 on 6.5”

702367100000 770412112810 HD-1208 Drum for Plain Spindle 8 on 6.5”

702367200000 770412112810 HD-1208 Drum for SAF-T-LUB Spindle 8 on 6.5”

770412119160 HD-1208 Drum w/9/16” Studs 8 on 6.5”

770412212510 770412212500 HD-HCS Drum Demountable 8 on 6.5”

Quality Driven…
1Contact Axis Product Service and Sales Department to Order

Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
10
 Axis Trailer Products, LLC ● Elkhart, IN.
4,000—6,000 lb. Torsion Axles

BRAKES HUB HARDWARE

AXIS P/N Description AXIS P/N Description
770512312200 12” Electric Brake Left Hand 770413247800 1/2-20 2.5" Press-in Stud

770512412200 12” Electric Brake Right Hand 770413247590 1/2-20 2.0” Press-in Stud

4,000—6,000 TA
770512312220 12” Electric Brake Left Hand w/ Park 770963140000 21-42-01 Grease Cap for Use with H-1206 or HD-1206
SAF-T-LUB Spindle
770512412220 12” Electric Brake Right Hand w/ Park
770963150000 21-43-01 Grease Cap for Use with H-1208 or HD-1208
796514312200 12” Hydraulic Brake Left Hand SAF-T-LUB Spindle

796514412200 12” Hydraulic Brake Right Hand 770963110000 85-1 Rubber Plug for SAF-T-LUB Grease Cap

796514312212 12” Hydraulic Brake Left Hand Fee-Backing 785452211000 21-1 Grease Cap for Use with H-1206 or HD-1206
Plain Spindle
796514412212 12” Hydraulic Brake Right Hand Free-Backing
778452921100 21-39 Grease Cap for Use with H-1208 or HD-1208
796514312214 12” Hydraulic Brake Left Hand Fee-Backing w/ Park Plain Spindle

796514412214 12” Hydraulic Brake Right Hand Fee-Backing w/ Park 766251101500 DL-600 Double Lip Seal for 2-1/8” Spindle Shaft

702366500000 12” Disc Brake w/ All Parts 766251701036 DL-700 Double Lip Seal for 2-1/4” Spindle Shaft

702366510000 13” Disc Brake w/ All Parts 770963120000 5-101 Tang Washer for SAF-T-LUB

● Phone 574.264.7955 ●axistrailerproducts.com

786722016140 1-14 Slotted Jam Nut

786930000000 “D” Washer for SAF-T-LUB Spindle

786930200000 “O” Washer for Standard Spindle

786940000000 1/8 X 1-3/4 Cotter Pin

764254255800 25580 Inner Tapered Roller Bearing

764254151230 15123 Outer Tapered Roller Bearing use with 1206 & HCS

764254141250 14125A Outer Tapered Roller Bearing

SIDE HANGER KITS

AXIS P/N Description

787855111000 #52-Left Hand Side Mount Hanger (1)

787855112000 #52-Right Hand Side Mount Hanger (1)

750711910160 5/8-18x1.5” HCS G5 Bolt-Zinc (4)

750721912181 5/8-18 FHN T-LOC Nut Zinc (4)

750730035800 5/8 Flat Washer - Zinc (4)

Left Hand Side Mount Hanger

Quality Driven…
1Contact Axis Product Service and Sales Department to Order

Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
11
● axistrailerproducts.com

4,000—6,000 lb. Torsion Axles

WHEEL & TIRE ASSEMBLIES

AXIS P/N DESCRIPTION WHEEL DIA. TYPE LOAD SLR PSI MAX LOAD
RANGE CAP. (LBS)
751050431607 LT235/85 R-16 8 on 6.5” White Spoke 16” Radial E 14.3” 80 3042
751050456750 LT225/75 R-15 6 on 5.5” White Mod 15” Radial D 13.5” 65 2335

751050495001 LT225-75 R-15 6 on 5.5” White Spoke 15” Radial D 13.5” 65 2335

751050495004 ST205/75 R-15 6 on 5.5” White Spoke 15” Radial C 12.6” 50 1820

751060244220 9.00-14.5 LT F T700 14.5” Bias F 13.3” 100 3230

● 4,000—6,000 TA
Axis Trailer Products, LLC ● Elkhart, IN. ● Phone 574.264.7955

Quality Driven…
1Contact Axis Product Service and Sales Department to Order

Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
12
 Axis Trailer Products, LLC ● Elkhart, IN. ● Phone 574.264.7955
6,100—7,000 lb. Torsion Axles
Typical Industries & Applications include:
• Recreational Vehicle Trailers
• Enclosed Trailers
• Cargo
• Vehicle
• Race Vehicle (Stacker)
• Open Utility Trailers
• Landscape
• Equipment
• Construction
• Construction Equipment
• Dump Trailers
• Marine
• Boat
• Personal watercraft
• Pontoon Boat
• Agricultural Equipment
• Feed & Grain

6,100—7,000 TA
• Spreaders
• Transport
• Specialty Trailer
• 1/2 Axles
• Custom Application

Mounting and Dimensions

In order to minimize tire wear and axle performance issues Axis recommends that the following guidelines
be followed when specifying axles within the 6,100 Type Flange Minimum Maximum
to 7,000 lb. The difference between hub face and
Straight Spindle No Brake Flange 15” 30.625”
outside of bracket dimensions.

● axistrailerproducts.com
Straight Spindle Flanged 15” 30.625”

Hub Face

Outside of Bracket

OPTIONS:

Available Finishes
include:
• Powder Coating
Standard Camber • Galvanized
• Wet Paint

Drop Center Camber

Quality Driven…
Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
13
 6,100—7,000 lb. Torsion Axles
axistrailerproducts.com

Low-Profile (Standard) High-Profile

TORSION DYNAMIC DATA (from bracket top to center of spindle)
(1” higher than Standard)
Start Bracket No Load Full Load Shock Load
Angle Type
●

Standard 6.24 4.30 3.30

45 Degree Down
Hi-Profile 6.99 5.05 4.05

Standard 4.30 2.00 0.96

22.5 Degree Down
Hi-Profile 5.05 2.75 1.71
6,100—7,000 TA

Standard 3.04 0.70 -0.30

10 Degree Down
Hi-Profile 3.79 1.45 0.45
Inboard Mount Outboard Mount
Standard 2.00 -0.30 -1.22
0 Degree
Hi-Profile 2.75 0.45 -0.47

Standard 0.96 -1.22 -2.05

10 Degree Up
Hi-Profile 1.71 -0.47 -1.30
Axis Trailer Products, LLC ● Elkhart, IN. ● Phone 574.264.7955

Standard -0.30 -2.24 -2.91

22.5 Degree Up
Hi-Profile 0.45 -1.49 -2.16

HUBS (All Parts (w/AP) Includes—Bearings, Seal, Dust Cap, Wheel Nuts & Grease)

AXIS P/N w/AP AXIS P/N Bolt Pattern Description

Race Only

702361100000 770412712610 6 on 5-1/2” H-1206 Hub for Plain Spindle

702361110000 770412712610 6 on 5-1/2” H-1206 Hub for SAFE-T-LUBE Spindle

702362100000 770412712810 8 on 6-1/2” H-1208 Hub for Plain Spindle

702362200000 770412712810 8 on 6-1/2” H-1208 Hub for SAFE-T-LUBE Spindle

702366100000 770412712610 6 on 5-1/2” HD-1206 Drum for Plain Spindle

702366200000 770412112610 6 on 5-1/2” HD-1206 Drum for SAFE-T-LUBE Spindle

702367100000 77041211810 8 on 6-1/2” HD-1208 Drum for Plain Spindle

702367220000 770412112810 8 on 6-1/2” HD– 1208 Drum for SAFE-T-LUBE Spindle

702366510000 770412908653 8 on 6-1/2” 13” Integral Hub & Rotor for Disc Brake

Quality Driven…
1Contact Axis Product Service and Sales Department to Order

Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
14
 Axis Trailer Products, LLC ● Elkhart, IN. ● Phone 574.264.7955
6,100—7,000 lb. Torsion Axles
BRAKES HUB HARDWARE
AXIS P/N Description AXIS P/N Description
796514312200 12” Hydraulic Brake Left Hand 766251101500 DL-600 Double Lip Seal for 2-1/8” Spindle Shaft

796514412200 12” Hydraulic Brake Right Hand 766251701036 DL-700 Double Lip Seal for 2-1/4” Spindle Shaft

796514312210 12” Hydraulic Brake w/ Park Left Hand 764254141250 14125A Outer Taper Roller Bearing for 1-1/4” Spindle

796514412210 12” Hydraulic Brake w/ Park Right Hand 764254255800 25580 Inner Taper Roller Bearing for 1-1/4” Spindle

796514312212 12” Hydraulic Brake/ Fee Backing Left Hand 770413247590 2” Press-In Stud for Idler Hubs Only
796514412212 12” Hydraulic Brake/ Free Backing Right Hand 770413247800 2-1/2” Press-In Stud for Idler Hubs & Brake Drums
770512312200 12” Electric Brake Left Hand
785452211000 21-1 Grease Cap—Fits 6 Lug Hub/Drum for Use With Plain
770512412200 12” Electric Brake Right Hand Spindle

796713410700 13” E-Coated Disc Brake Set (includes all attaching components) 785452213900 21-39 Grease Cap—Fits 8 Lug Hub/Drum for Use With Plain
Spindle
796713410075 13” SCAD Disc Brake Set (includes all attaching components)
770963140000 21-42-01 Grease Cap—Fits 6 Lug Hub/Drum for Use with
SAFE-T-LUBE Spindles

770963150000 21-43-01 Grease Cap—Fits 8 Lug Hub/Drum for Use with

6,100—7,000 TA
SAFE-T-LUBE Spindles

770963110000 85-1 Rubber Plug for SAFE-T-LUBE Grease Caps

786721408200 1/2-20 Cone Wheel Nut

770413247700 Press-In Stud for 12” Rotor

770413247750 Press-In Stud for 13” Rotor

770963120000 5-101 Tang Washer for SAF-T-LUB

786930200000 "O"--Washer for Standard Spindle for Use with Standard Spindle

786722016140 1-14 Slotted Jam Nut

786940000000 1/8” x 1-3/4” Cotter Pin for Use with Standard Spindle

786930000000 "D" Washer for Use with SAF-T-LUB Spindle

●
axistrailerproducts.com
SIDE HANGER KITS
AXIS P/N Description

787855121000 #70 Left Hand Side Mount Hanger (1)

787855122000 #70 Right Hand Side Mount Hanger (1)

750711910160 5/8”—18 x 1.5 HCS Zinc Bolt (4)

750721912181 5/8”—18 FH Zinc T–Lock Nut (4)

750730035800 5/8” Zinc Flat Washer (4)

Left Hand Side Mount Hanger

Quality Driven…
1Contact Axis Product Service and Sales Department to Order

Customer Focused
15 Order Forms can be found at https://axistrailerproducts.com/axles/
 6,100—7,000 lb. Torsion Axles
● axistrailerproducts.com

WHEEL & TIRE ASSEMBLIES

AXIS P/N DESCRIPTION WHEEL DIA. TYPE LOAD SLR PSI MAX LOAD
RANGE CAP. (LBS)
751050420000 ST235/85 R16 6 on 5.5 White Spoke 16” Radial E 14.3” 90 3042

751050431607 ST235/85 R16 8 on 6.5 White Spoke 16” Radial E 14.3” 90 3042

751050431608 ST235/80 R16 8 on 6.5 White Spoke 16” Radial D 14.0” 65 3000

751050431609 ST235/80 R16 8 on 6.5 Silver Mod 16” Radial D 14.0” 65 3000

751050431610 LT235/85 R16 8 on 6.5 White Spoke 16” Radial D 14.3” 65 2623

751050431620 LT235/85 R16 8 on 6.5 Silver Mod 16” Radial D 14.3” 65 2623

751050431630 LT235/85 R16 8 on 6.5 White Mod 16” Radial D 14.3” 65 2623
6,100—7,000 TA
Axis Trailer Products, LLC ● Elkhart, IN. ● Phone 574.264.7955

Quality Driven…
1Contact Axis Product Service and Sales Department to Order

Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
16
 Axis Trailer Products, LLC ● Elkhart, IN. ● Phone 574.264.7955
10,000 lb. General Duty Torsion Axles

Typical Industries & Applications include:

• Recreational Vehicle Trailers
• Enclosed Trailers
• Cargo
• Vehicle
• Race Vehicle (Stacker)
• Open Utility Trailers
• Landscape
• Equipment
• Construction
• Construction Equipment
• Dump Trailers
• Marine
• Boat
• Personal watercraft
• Pontoon Boat
• Agricultural Equipment
• Feed & Grain

10,000 GD TA
• Spreaders
• Transport
• Specialty Trailer
• Custom Application

Mounting and Dimensions

In order to minimize tire wear and axle performance issues Axis recommends that the following guidelines
be followed when specifying axles at 10,000 lb. The Type Flange Minimum Maximum
difference between hub face and outside of bracket
Straight Spindle Flanged 22.7” 34.4”
dimensions.

● axistrailerproducts.com

OPTIONS:
Available Finishes
include:
• Powder Coating
• Galvanized
Quality Driven…
• Wet Paint Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
17
 10,000 lb. General Duty Torsion Axles
● axistrailerproducts.com

TORSION DYNAMIC DATA (from bracket top to center of spindle)

Start Bracket No Load Full Load Shock Load

Angle Type

Standard 7.18 5.24 4.24

45 Degree Down

Standard 5.24 2.94 1.90

22.5 Degree Down

Standard 3.98 1.64 0.64

10 Degree Down
10,000 GD TA

Standard 2.94 0.64 -0.28

0 Degree

Inboard Mount Outboard Mount Standard 1.90 -0.28 -1.11

10 Degree Up

Standard 0.64 -1.30 -1.97

22.5 Degree Up
Axis Trailer Products, LLC ● Elkhart, IN. ● Phone 574.264.7955

HUBS (All Parts (w/AP) Includes—Bearings, Seal, Dust Cap, Wheel Nuts & Grease)

AXIS P/N w/AP AXIS P/N Bolt Pattern Description

Race Only

770450004000 8 on 6.5” 10K GD Hub/Drum Complete Cupped & Studded, 5/8-18"

Studs w/ Mounting Screws

Quality Driven…
1Contact Axis Product Service and Sales Department to Order

Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
18
 Axis Trailer Products, LLC ● Elkhart, IN. ● Phone 574.264.7955
10,000 lb. General Duty Torsion Axles

BRAKES HUB HARDWARE

AXIS P/N Description AXIS P/N Description
770512601000 12 1/4" x 3 3/8" LH Electric Brake 786930810000 Spindle Washer for 9/10K Hub/Drum

770512602000 12 1/4" x 3 3/8" RH Electric Brake 786930830000 1 1/2-12 Spindle Nut for 9/10K Hub/Drum

786930820000 Tang Washer for 9/10K Hub/Drum

764250438700 BEARING 387A

764254255800 BEARING 25580

766252010051 OIL SEAL 9/10K GD HUB/DRUM

750734300000 7/16" Loc Washer Zinc

750721807200 7/16-20 FH NUT ZINC

750734100000 7/16-20 x 1.5" HCS G5 Bolt

766252010050 O-Ring for 9/10K Oil Hub/Drum

750730008150 5/8-18 Cone Wheel Nut

10,000 GD TA
10k Oil Bath Cap - with Air-Tight

AIR TIGHT CAP

● axistrailerproducts.com
SIDE HANGER KITS
AXIS P/N Description

Left Hand Side Mount Hanger

Quality Driven…
1Contact Axis Product Service and Sales Department to Order

Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
19
 10,000 lb. General Duty Torsion Axles
● axistrailerproducts.com

WHEEL & TIRE ASSEMBLIES

AXIS P/N DESCRIPTION WHEEL DIA. TYPE LOAD SLR PSI MAX LOAD
RANGE CAP. (LBS)
10,000 GD TA
Axis Trailer Products, LLC ● Elkhart, IN. ● Phone 574.264.7955

Quality Driven…
1Contact Axis Product Service and Sales Department to Order

Customer Focused
Order Forms can be found at https://axistrailerproducts.com/axles/
20