Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

PRV 15sw2000a6

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

15SW2000

Professional Low Frequency Driver

KEY FEATURES

• 4” Voice coil
• 1000 Watts continuous power handling
• 96 dB Sensitivity
• 45 - 2,300 Hz

Nominal Diameter 15” (310 mm)


Nominal impedance 8 Ohms
Rated Power Handling 1,000 Watts
GENERAL SPECIFICATIONS

Program Power 2,000 Watts


Sensitivity 2.83V at 1m 96 dB
Recommended Hi Pass Crossover* 50 Hz*
*For Full Power Handling *12db Per Octave Crossover

Frequency Response at -10dB 45 - 2,300 Hz


Voice Coil Diameter 4” (100 mm)
Voice Coil Wire Copper
Voice Coil Winding Depth 31.0 mm
Former Material Glass Fiber
Magnetic Gap Depth 12.0 mm
Frame Material Die cast Aluminum

15.47" (393mm)

Equivalent Volume Vas 61.53 l


Excursion (mathematical)*** Xmax 12.5 mm
THIELE-SMALL PARAMETERS

7.11" (180.5mm)

7.68" (195mm)
Free Air Resonance Fs 52.9 Hz
Mechanical Factor Qms 16.54
Electrical Factor Qes 0.57
Total Factor Qts 0.55
Cone Area Sd 908 cm² 8.66" (220mm)
Mechanical Mass Mms 169.1 g 13.98" (355mm)
Bl Factor Bl 23.19 Tm
Dc Resistance Re 5.5 Ohms Frequency Response Measured at 2.83V/1m
110
Inductance Le 1.51 mH at 1 kHz
dBSPL
Mechanical Mass Without Air Mmd 153.6 g
100
Mechanical Compliance Cms 0.053 mm/N
90

Overal Diameter 15.47”(393 mm)


80
EXTRA INFO

Front Mount Baffle Cutout 13.98” (355 mm)


Mounting Depth 7.11”(180.5 mm)
70
Overall Depth 7.68”(195 mm)
Net Weight 25.90 Lbs (11.75 kg)
60
Shipping Weight 28.66 Lbs (13.0 kg) 20 50 100 200 500 1k 2k Hz 5k 10k 20k

Carton Dimensions W x L x H 16.73”x 16.73” x 8.66” PRV AUDIO USA (USA and Export) PRV AUDIO BRAZIL (Brazilian Sales Only)
FORT LAUDERDALE, FL SAO LEOPOLDO, RS
(425 x 425 x 220mm) support@prvaudio.com vendas@pvaudio.com.br
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4 www.prvaudio.com www.pvaudio.com.br
PRV Audio strives to manufacture the best drivers in the Professional Loudspeaker industry. Specifications are subject to change due to continuous product improvement - Rev: 12/18

You might also like