Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

12PLB76

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

12PLB76

LF Drivers - 12.0 Inches

700 W continuous program power capacity


76 mm (3 in) aluminium voice coil
50 - 2000 Hz response
98.5 dB sensitivity

Specifications Design Parameters


Nominal diameter 320 mm (12.0 in) Spider Single Le 1.2 mH
Nominal impedance 8Ω Pole design T-Pole EBP 208 Hz
Minimum impedance 6.4 Ω Woofer cone WP Waterproof Front Side
treatment (upon request)
Nominal power handling1 350 W Mounting And Shipping Info
Recommended
42.0 dm 3 (1.48 ft3)
Continuous power handling2 700 W enclosure Overall diameter 316 mm (12.4 in)

Sensitivity (1W/1m)3 99.0 dB Recommended 65 Hz Bolt circle diameter 296 mm (11.6 in)
tuning
Frequency range 50 - 2000 Hz Baffle cutout 282.0 mm (11.1 in)
diameter
Voice coil diameter 76 mm (3.0 in)
Parameters4 Depth 136 mm (5.35 in)
Winding material Aluminium
Fs 50 Hz Flange and gasket 16 mm (0.62 in)
Former material Glass Fibre thickness
Re 5.0 Ω
Winding depth 16 mm (0.62 in) Air volume occupied
by driver 3.3 dm 3 (0.12 ft3)
Qes 0.24
Magnetic gap depth 11 mm (0.4 in)
Qms 5.3 Net weight 7.4 kg (16.4 lb)
Flux density 1.05 T
Qts 0.23 Shipping weight 8.2 kg (18.0 lb)

Vas 75.0 dm 3 (2.6 ft3) Shipping box 340x340x170 mm


Design (13.4x13.4x6.7 in)
Sd 522.0 cm 2 (80.9 in2)
Surround shape Double Roll
η₀ 3.8 %
Cone shape Exponential Service Kit
Xmax 5.0 mm
Magnet material Ferrite RCK12PLB768
Xvar 7.0 mm
Mms 51 g
Bl 18.6 Txm

1. 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs. Power calculated on 3. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
rated minimum impedance. Loudspeaker in free air. 4. Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.
2. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.

You might also like