Steam: Dry and Wet Steam
Steam: Dry and Wet Steam
The mist formed when the gas or vapor from boiling water condenses in the air. the gas or vapour into which water is changed when boiled the hot wet substance like a thin cloud that is produced whenwat er is heated Steam is the gas formed when water passes from the liquid to the gaseous state
Dry steam applies to steam when all its water molecules remain in the gaseous state. It's a transparent gas. Wet steam applies to steam when a portion of its water molecules have given up their energy (latent heat) and condense to form tiny water droplets.
Types of Steam
If water is heated beyond the boiling point, it vaporizes into steam, or water in the gaseous state. However, not all steam is the same. The properties of steam vary greatly depending on the pressure and temperature to which it is subject
Saturated (dry) steam results when water is heated to the boiling point (sensible heating) and then vaporized with additional heat (latent heating). If this steam is then further heated above the saturation point, it becomes superheated steam (sensible heating).
Saturated steam
Saturated (dry) steam results when water is heated to the boiling point (sensible heating) and then vaporized with additional heat (latent heating
In a boiler, energy from the fuel is transfered to liquid water in order to create steam. At first, cold water gets warmer and receives energy in the form of sensible heat, until the boiling point.
As indicated by the black line in the above graph Saturated steam occurs at temperatures and pressures when the rate of water vaporization is equal to the rate of condensation.
Superheated Steam
Superheated steam is created by further heating wet or saturated steam beyond the saturated steam point. This yields steam that has a higher temperature and lower density than saturated steam at the same pressure. Superheated steam is mainly used in propulsion/drive applications such as turbines, and is not typically used for heat transfer applications. Superheated steam heated to 200 800C (392 - 1472F) at atmospheric pressure is particularly easy to handle, and is used in the household steam ovens seen on the market today.
To maintain the dryness of the steam for steam-driven equipment, whose performance is impaired by the presence of condensate
To improve thermal efficiency and work capability, e.g. to achieve larger changes in specific volume from the superheated state to lower pressures, even vacuum.
Variable steam temperature velocity, otherwise the temperature will drop as even at constant pressure
Superheated steam needs to maintain a high heat is lost from the system
Property Sensible heat used to transfer heat Temperature may be extremely high
Disadvantage
Temperature drops can have a negative impact on product quality Stronger materials of construction may be needed, requiring higher initial equipment outlay
Wet Steam
This is the most common form of steam actually experienced by most plants. When steam is generated using a boiler, it usually contains wetness from non-vaporized water molecules that are carried over into the distributed steam. Even the best boilers may discharge steam containing 3% to 5% wetness
STEAM OF HEATING Positive Pressure Steam Steam is typically generated and distributed at a positive pressure. In most cases, this means that it is supplied to equipment at high pressures and temperatures higher than 100C (212F). STEAM FOR PROPULSION/DRIVE
Steam is regularly used for propulsion (as a driving force) in applications such as steam turbines. The steam turbine is a piece of equipment that is essential for the generation of electricity in thermal electric power plants. In an effort to improve efficiency, progress is being made toward the use of steam at ever-higher pressures and temperatures. There are some thermal electric power plants that use 25 MPa abs (3625 psia), 610C (1130F) superheated, supercritical pressure steam in their turbines
STEAM AS MOTIVE FLUID Steam can also be used as a direct "motive" force to move liquid and gas streams in piping. Steam jet ejectors are used to pull vacuum on process equipment such as distillation towers to separate and purify process vapor streams. They are also used for continuous removal of air from surface condensers, in order to maintain desired vacuum pressure on condensing (vacuum) turbines. STEAM FOR ATOMIZATION Steam atomization is a process where steam is used to mechanically separate a fluid. Steam boilers and generators that use fuel oil will use this method to break up the viscous oil into smaller droplets to allow for more efficient combustion.
Steam is sometimes used to add moisture to a process while at the same time supplying heat. For example, steam is used for moisturization in the production of paper, so that paper moving over rolls at high speed does not suffer microscopic breaks or tears. Another example is pellet mills. Often mills that produce animal feed in pellet form use direct-injected steam to both heat and provide additional water content to the feed material in the conditioner section of the mill.
STEAM FOR HUMIDIFICATION Many large commercial and industrial facilities, especially in colder climates, use low pressure saturated steam as the predominant heat source for indoor seasonal heating. HVAC coils, often combined with steam humidifiers, are the equipment used for conditioning the air for indoor comfort, preservation of books and records, and infection control Steam is used to humidify air within an air duct before the air is distributed to other regions of a building.
Steam Humidifier in Air Duct