Crawler Excavators

DX1000LC-7

G
N
TI
IN
PR
R
FO
T
O
N

Maximum power 469 hp

Operating weight 97.0 ~ 99.5 t
Bucket capacity 5.4 ~ 6.8 m³
DEVELON DX1000LC-7 CRAWLER EXCAVATOR:

MADE FOR THE TOUGHEST

APPLICATIONS
Lift your business to the next level with the
DX1000LC-7 Develon excavator.

G
Strong undercarriage, and the highest

N
engine power and hydraulic flow in
the market, with total control of fuel

TI
consumption, to offer the lowest
possible cost per ton.

IN
PR
R
FO
T
O
N
N
O
T
FO
R
PR
IN
TI
N
G
 RAISE PROFITS, PRODUCTIVITY
& FUEL EFFICIENCY

HIGH PRODUCTIVITY AND LOW

COST OF OWNERSHIP
Delivers higher productivity and reduced
fuel consumption in an efficient and
comfortable work environment.

G
N
RELIABILITY
Designed for the toughest applications

TI
and the most abrasive materials.

IN
SAFETY
Your safety is our priority: 360° camera
system, large side mirrors, powerful LED
work lights, anti-slip steps and platforms,
PR
guard rails on upper structure.

MASS EXCAVATION
2 Heavy Duty (HD) front combinations
R

available to match various conditions.

Mass excavation front with large bucket
size or heavy-duty fronts when long reach
FO

is needed.

SWING BEARINGS
Unique design of crossed bearings, for
T

better stress distribution, and increased

lifetime.
O
N

UNDERCARRIAGE DURABILITY
Heavy-duty undercarriage, with large
rollers and sprocket, enhanced frame for
the toughest applications.

4|
EASY MAINTENANCE COMFORT ENGINE
Automatic greasing system as standard, all One of the most spacious cabs in the Exceptionally powerful – with high torque
filters easily accessible, compressor with market, with low noise & vibration levels at low revs – the Perkins 2806J engine
air gun as option, everything designed for and excellent all-round visibility. Fully combines reliability and low environmental
easy maintenance. adjustable heated air-suspension seat, impact. This Stage V compliant 6-cylinder

G
air conditioning with climate control as engine delivers 469 kW at 2000 rpm.
standard.

ADVANCED FILTRATION OPERATE AT EASE EXCELLENT FUEL EFFICIENCY

N
Highest efficiency filters & cleaners remove All important information is at your The Smart Power Control (SPC) system
water, dust & particles to protect your fingertips with the new easy-to-use 8" increases fuel efficiency by adjusting the

TI
investment optimally. touch screen. Exclusive jog shuttle switch, power to meet the application's needs.
4 work & 4 power modes, proportional The system delivers the exact amount of oil
control. needed to avoid any loss of energy.

IN
PR
R
FO
T
O
N

| 5
 STAG

EV
CO

MP
LIA N T

G
N
TI
IN
PR
R
FO
T
O
N

Hydraulic
Elec. flow
NO pump NO
LOSS LOSS
Elec.
sensing line

EPOS.
Controller
Work load Optimized Work load Optimized
hydraulic power hydraulic power

6|
 TOP
PERFORMANCE
AND FUEL
EFFICIENCY

G
THE POWER TO RAISE PRODUCTIVITY

N
- The DX1000LC-7 is equipped with the latest generation of
Perkins engine
- Stage V compliant, this engine boasts extremely low emissions

TI
because reducing our environmental impact is paramount to us
- Exhaust gases are purified by Selective Catalytic Reduction
(SCR) technology, a Diesel Oxidation Catalyst (DOC) and a
Diesel Particulate Filter (DPF)

IN
EFFICIENT FUEL MANAGEMENT
- Choice of 4 power modes and 4 working modes guarantees
optimum performance in all conditions
PR
- Smart Power Control (SPC3) system: reduces engine speed and
adjusts pump torque according to work conditions. The system
automatically adjusts engine power and hydraulic output
to improve fuel efficiency and reduce emissions. 2 systems
(Variable Speed Control and Pump Torque Control) work
together to improve efficiency while maintaining productivity.
- Engine auto-shut-off: shuts down the engine after the machine
has been idling for a specified time. The operator can set the
R

delay before shut-off via the touchscreen

ASYMMETRIC TURBOCHARGER
FO

High-efficiency asymmetric turbocharger uses a design with

2 different sized scrolls to stream exhaust across the turbine
wheel at different velocities.

THE MOST ADVANCED HYDRAULIC SYSTEM

(D-ECOPOWER+)
This new electronic main pump accurately calculates the amount
T

of pump flow required for each actuator, thereby maximizing

productivity (faster operation) and avoiding unnecessary fuel loss.
O
N

DPF SCR

DOC

| 7
 A B C D

Swing Motor MVC Main Pump Engine

G
N
TI
IN
PR
B

A D
R

C
FO
T
O

RELIABILITY –
N

THE HABIT OF A LIFETIME

In your profession, you need equipment you can depend on. At Develon, we put durability and
reliability at the core of our machines’ development. Our materials and structures undergo stringent
testing for strength and resilience under the most extreme conditions.

8|
DESIGNED FOR LONG-TERM,
ALL-ROUND, HEAVY-DUTY
PERFORMANCE

G
QUALITY-PROVEN MAIN COMPONENTS HEAVY-DUTY SPROCKET
Manufactured with the finest quality main components Our heavy-duty sprocket further increases your machine's
customized precisely for large equipment, this new machine durability.

N
offers Best-in-Class power and durability.
BOOM
STRUCTURE - Boom foot design to increase the pin strength and decrease

TI
Develon offers a whole new structure designed specifically for one-sided wear of pin.
mining operations, keeping your excavator running at all times in - Flat steel plate for dispersing machine stress.
rugged harsh environments. - Welding design to increase welding part lifetime.
- Inner reinforced plate changed to disperse stress.

IN
HEAVY-DUTY FRONT
The boom and arm have been specially developed for the ARM
toughest applications, such as quarrying or mass excavation, - Bottom steel plate to increase strength of arm structure.
which considerably enhances the overall durability of the - Arm center boss to lower stress.
machine. - Arm welding design to decrease stress.
PR
CROSSED ROLLER SWING BEARINGS
Unique crossed bearing design provides longer lifetime by
distributing stress more evenly.

UNDERCARRIAGE
Our heavy-duty undercarriage further increases the durability of
R

your machine.
FO
T
O

Protected hydraulic system Heavy-duty under cover Frame

N

Crossed roller swing bearings Undercarriage Heavy-duty sprocket

| 9
 1. OPG front guard
2. 360° all-around view camera (AVM)
3. 8" touch screen
4. Cup holder
5. Joysticks and switches are
integrated in adjustable control
consoles
6. Improved visibility on the bottom
1
right
7. Separate seat height adjustment
lever and cushion tilting function
8. Straight ergonomic pedals
9. Flat, spacious, easy-to-clean floor
2

G
N
TI
3

IN 4
PR
5
R

6
FO

7
T

8
O
N

10|
 OPERATING IN
HIGH COMFORT

G
BEST-IN-CLASS OPERATOR ENVIRONMENT
The DX1000LC-7 is designed to provide you with the best possible
working conditions. The sophisticated state-of-the-art cab is

N
pressurized and compliant with level 2 FOPS protection when
equipped with FOPS guard for your safety. A high-quality heated
seat with air suspension provides maximum operator comfort.

TI
CAB SUSPENSION
The cab’s suspension system (CabSus mount) dampens vibrations
and provides outstanding protection against impact. This system

IN
absorbs shocks and vibrations much more effectively than a
conventional silentblock suspension system.

DEVELON SMART TOUCH

The wide 8" touchscreen provides easy scrolling through the
PR
different menus, including power settings and auxiliary hydraulics
settings. It also allows you to connect a Bluetooth device or listen
to your favorite radio station.

360° ALL-AROUND VIEW CAMERA (AVM) SYSTEM

The 360° camera system gives you full view of the machine’s
surroundings.
R

DEVELON SMART KEY

We bring automotive standards and comfort to construction
FO

machinery
- Search function
- Coming/leaving home light function
- Remote door opening
- Keyless engine start

ERGONOMICALLY DESIGNED PEDALS

Ergonomically designed travel pedals placed in the middle. Pedal
T

angle adjusted to relieve pressure on ankle and joints, reducing

fatigue and lightening the operator's load.
O
N

| 11
 2

1
3

1. Develon Smart Key

2. Shear buttons
3. Breaker/booster button

G
4. Starter switch (Start/Stop
button)
5. Engine speed control dial
6. Travel speed selector switch

N
4 7. Light switch
8. Cab work light switch
9. After-treatment system switch

TI
10. Bluetooth control panel
11. Air conditioning and heating
control panel

IN
PR
6

8
R

9
FO

10
T

11
O

TAKE A SEAT IN
N

BUSINESS CLASS
The ergonomic controls and the easy-to-view color monitor place the machine firmly in your hands.

12|
TOTAL CONTROL IN ALL SIMPLICITY
DYNAMIC POWER MANAGEMENT 4 WORK MODES AND 4 POWER MODES +
- Automatic travel speed range selection (slow/fast) BOOM / SWING PRIORITY CONTROL

G
- A one-touch deceleration button immediately reduces engine Delivers the needed power according to your specific application
speed to low idle while minimizing fuel consumption:
- Auto-idling starts 4 seconds (adjustable) after all controls are - 1-way mode, 2-way mode, digging mode and lifting mode

N
returned to neutral – reducing fuel consumption and noise - Power plus mode, power mode, standard mode, economy mode
levels in the cab - Boom / swing priority control allows you to control operating
modes with just 1 button – resulting in more comfortable and
"INTELLIGENT FLOATING BOOM" MODE productive operation optimized for various work environments

TI
The “intelligent floating boom” function allows the boom to move
up and down freely according to the application:
- Hydraulic breaker setting: during boom down operation, the
boom moves down freely under its own weight. The result is

IN
reduced shock and vibration and longer breaker service life
- Full float setting: during boom down selection, the boom is
allowed to rise and fall as required while the bucket is drawn
across the ground
BOOM PRIORITY MODE
PR
EXPERT FINGERTIP CONTROL
- The new multi-function 8" touchscreen displays all useful
information in a visual and intuitive format
- At a glance, you can check the machine’s status and settings to
achieve optimal efficiency Hydraulic power

90o
- Develon’s unique jog shuttle switch gives you easy and precise
control over all machine functions
R

- Highly sensitive and low-effort joysticks enable you to work

safely, smoothly and confidently
- The proportional thumb switches on the joysticks can be
FO

mounted horizontally or vertically, as the operator prefers, for

optimal control of hydraulic attachments
Boom Swing
cylinder device

SWING PRIORITY MODE

T
O

180 o
N

Hydraulic power

Boom Swing
cylinder device

| 13
 SIMPLE MAINTENANCE
FOR MAXIMUM UPTIME

G
N
TI
IN
PR
R
FO
T

AIR COMPRESSOR
Air gun in your cab helps
O

you keep the environment

clean and comfortable.
N

WIDTH
520mm WIDE CATWALK
Maintenance is made easier with 520 mm
catwalk.

14|
 AIR FLOW

G
N
HEAVY-DUTY AIR CLEANER
2-stage air cleaner protects engine from

TI
dust and contaminating particles – avoids
downtime and is easy to maintain.

IN
REVERSIBLE FAN
PR
- Rotating cooling fan in reverse direction is
possible.
- Able to blow away dust on radiator and oil
cooler easily to save time & effort.
R

CENTRALIZED FUEL FILTRATION

FO

SYSTEM
Water separator, pre-fuel filter and main filter
are grouped together to increase engine
life and prevent machine failures, making
machine inspection or maintenance much
easier with one simple access.
T
O

ELECTRIC FUEL TRANSFER PUMP

N

(ETP)
Use this switch to easily refill fuel for your
machine after its inspection or repair.

AUTO GREASE SYSTEM (AGS)

This new auto grease filling device helps
reduce maintenance time significantly and
prevents unexpected downtime.

| 15
 TECHNICAL SPECIFICATIONS

ENGINE HYDRAULIC SYSTEM

Designed to deliver superior performance and fuel efficiency, The e-EPOS (Electronic Power Optimizing System) is the brain of
the Perkins 2806J diesel engine fully meets the latest Stage V the excavator – minimizing fuel consumption and optimizing the
emission regulations. To optimize machine performance, the efficiency of the hydraulic system for all working conditions. To
engine uses high-pressure fuel injectors, air-to-air inter-cooler harmonize the operation of the engine and the hydraulics, the

G
and electronic engine controls. 4-cycle water-cooled, wastegate e-EPOS is connected to the engine’s electronic control unit (ECU)
turbocharged, Diesel Oxidation Catalyst (DOC), Selective Catalytic via a data transfer link.
Reduction (SCR) and Diesel Particulate Filter (DPF). • The hydraulic system enables independent or combined
operations

N
Model
• 2 travel speeds offer either increased torque or high speed
Perkins 2806J
• Cross-sensing pump system for fuel savings
No. of cylinders • Auto-deceleration system

TI
6 • 4 work modes and 4 power modes
• Button control of flow in auxiliary equipment circuits
Rated power at 2000 rpm
• Computer-aided pump power control
ISO 14396, gross 469 kW (629 hp)
Main pumps

IN
Max. torque at 1300 rpm
3 × variable displacement axial piston pumps
301.1 kgf·m
Maximum flow at 1800 rpm 3 × 523 l/min
Idle (low - high)
Pilot pump
700 - 1800 rpm
Gear pump
PR
Displacement Maximum flow at 1800 rpm 60 l/min
18100 cm³ Relief valve settings
Bore × stroke Implement 360 bar (367 kgf/cm²)
145 mm × 183 mm Travel 368 bar (375 kgf/cm²)
Swing 294 bar (300 kgf/cm²)
Starter
Pilot 200 bar (28 kgf/cm²)
24 V / 9 kW
R

Batteries - Alternator
2 × 12 V, 200 Ah - 24 V, 115 A
Air filter
FO

Double element air cleaner with 2-stage filtration

UNDERCARRIAGE HYDRAULIC CYLINDERS

T

Extremely robust construction throughout - made of high-quality, High-strength steel piston rods and cylinder bodies. Shock-
durable materials, with all welded structures designed to limit absorbing mechanism fitted in all cylinders for shock-free
stresses. operation and extended piston life.
O

• Track rollers lubricated for life

• Idlers and sprockets fitted with floating seals Cylinders Quantity Bore × rod diameter × stroke (mm)
• Track shoes made of induction-hardened alloy with double Boom 2 215 × 150 × 1905
N

grouser
• Heat-treated connecting pins Arm 1 240 × 170 × 2020
• Hydraulic track adjuster with shock-absorbing tension Bucket 1 210 × 145 × 1530
mechanism
Upper rollers (standard shoe)
3
Lower rollers
9
Number of links & shoes per side
51
Overall track length
6370 mm

16|
CAB FLUID CAPACITIES
The air-conditioning and heating systems are integrated for Fuel tank 1100 l
optimal climate control. An automatically-controlled fan supplies
Cooling system (radiator) 105 l
the pressurized and filtered cab air, which is distributed
throughout the cab from multiple vents. Hydraulic oil tank 880 l

G
The heated air suspension, adjustable operator’s seat includes a Engine oil 65 l
seat belt. The operator can adjust the ergonomic seat and joystick
Swing drive 2×8l
console separately according to his preferences.
Travel device 2 × 25 l

N
A-weighted emission sound pressure level at the operator’s
position, LpAd (ISO 6396:2008)
72 dB(A)

TI
A-weighted sound power level, LwAd (2000/14/EC)
110 dB(A)

DRIVE

IN
Each track is driven by an independent, high-torque axial piston
SWING MECHANISM motor through a planetary reduction gearbox. Two levers / foot
pedals guarantee smooth travel with counter-rotation on demand.
The swing mechanism uses 2 axial piston motors, driving a
The track frame protects the travel motor, brake and planetary
2-stage planetary reduction gear bathed in oil for maximum
PR
gears. The multi-disc track brakes are spring-applied and
torque.
hydraulic released.
• Swing bearings: Unique design of crossed bearings, for better
stress distribution, and increased lifetime Travel speed (low - high)
• Internal gear and pinion immersed in lubricant 2.6 - 4.5 km/h
Maximum swing speed Maximum traction
6.1 rpm 60.6 t
R

Maximum swing torque Maximum gradeability

31850 kgf·m 70% / 35°
FO

WEIGHT

Shoe width (mm) Machine weight (t) Ground pressure (kgf/cm²)

650 (Std) 97.0 1.37
Double grouser 750 97.6 1.19
T

900 99.5 1.01

O

COMPONENT WEIGHTS
N

Item Unit Weight Remarks

Upper structure without front kg 32870 With counterweight
Lower structure assembly kg 14150
Counterweight kg 12700
Front assembly kg 15800 Based on standard
mm 7250 / 8400
Boom Including bushings
kg 10230 / 10740
mm 2900 / 3700
Arm Including bushings
kg 5590 / 5825

| 17
 TECHNICAL SPECIFICATIONS

BUCKETS
Width (mm) Digging force (ISO)
Capacity (m³) Weight
Bucket Type With side W/O side (STD / OPT)
SAE (kg)
cutters cutters (ton)

G
5.4 1940 1940 5214
S Class 42.96 / 48.2
6.8 2320 2320 5723

N
S CLASS (SEVERE DUTY) BUCKET

TI
The S CLASS (SEVERE DUTY) BUCKET is designed for mass excavation in high density
severe mining & quarry using high strength and abrasion resistance materials.

Features & Benefits

IN
• 2 different sizes are available.
• Diamond folded section for greater structural strength.
• Overlapping plate for protecting lip plate and increasing strength.
• Optimized shape for high penetration and heel clearance.
PR
• Deep profile for high capacity.
• Low tip radius for greater digging performance.
• Optimized design for genuine Develon SD (Severe Duty) tooth for
durability and productivity.
• Bolt-on dual side shroud design for more durability and protection
in severe applications.
• Wear pads and bottom section. High-strength steel
• High grade material composition for better durability.
R

High-abrasion-resistant steel
• Incredible strength with lip plate using 500HBN.
• Higher abrasion resistance using 400HBN.
FO

Classification Model name Width (mm) Capacity (m3) Lip plate (mm)
Bucket assy; 5.4 m
3
1940 5.4 70
DX1000LC-7
Bucket assy; 6.8 m 3
2320 6.8 70
T

HYDRAULIC BREAKER
Designed for focusing on breaking jobs. To be faithful to the hydraulic breaker's original
function, Develon has optimized impact power and durability, while providing customer
O

convenience and easy maintenance.

Features & Benefits

N

• Concrete proven working principle (Oil and gas assist)

• Anti-blank blow system
• Dual Speed Control
• Competitive component counts
• Heavy-duty main bracket design
• Maximized lifetime of dampers and wear plate
• Centralized lubricating system (option)

Flow
Operating Weight Tool diameter Operating pressure Frequency
Model name (l/min)
(kg) (mm) (bar)
Min Max High BPM Low BPM
DXB1000 10070 245 165 x 185 410 530 360 - 470 360 - 470

18|
LIFTING CAPACITIES

W/O BUCKET (UNIT: 1000 KG)

A 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m Max. reach
B A

Boom 7.25 m ∙ Arm 2.9 m ∙ Shoe 650 mm ∙ Counterweight 12.76 t

G
10.5 m 19.98 * 19.98 * 6.40
9.0 m 21.16 * 21.16 * 17.95 * 17.95 * 7.90
7.5 m 21.36 * 21.36 * 17.12 * 17.12 * 8.91
6.0 m 26.69 * 26.69 * 22.77 * 22.77 * 20.63 * 19.84 16.94 * 16.94 * 9.57

N
4.5 m 30.62 * 30.62 * 24.73 * 24.73 * 21.48 * 19.26 17.25 * 16.35 9.96
3.0 m 34.06 * 33.81 26.63 * 24.38 22.42 * 18.64 18.06 * 15.64 10.10
1.5 m 35.83 * 32.51 27.90 * 23.51 23.05 * 18.13 19.47 * 15.55 10.02
0.0 m 35.76 * 31.96 28.14 * 23.02 22.94 * 17.83 20.80 * 16.12 9.70

TI
-1.5 m 43.15 * 43.15 * 34.02 * 31.92 27.04 * 22.91 21.42 * 17.87 20.89 * 17.57 9.13
-3.0 m 37.87 * 37.87 * 30.36 * 30.36 * 23.91 * 23.25 20.57 * 20.57 8.23
-4.5 m 29.38 * 29.38 * 23.41 * 23.41 * 19.02 * 19.02 * 6.89

Boom 7.25 m ∙ Arm 2.9 m ∙ Shoe 750 mm ∙ Counterweight 12.76 t

IN
10.5 m 19.98 * 19.98 * 6.40
9.0 m 21.16 * 21.16 * 17.95 * 17.95 * 7.90
7.5 m 21.36 * 21.36 * 17.12 * 17.12 * 8.91
6.0 m 26.69 * 26.69 * 22.77 * 22.77 * 20.63 * 19.96 16.94 * 16.94 * 9.57
4.5 m 30.62 * 30.62 * 24.73 * 24.73 * 21.48 * 19.39 17.25 * 16.46 9.96
PR
3.0 m 34.06 * 34.03 26.63 * 24.54 22.42 * 18.76 18.06 * 15.74 10.10
1.5 m 35.83 * 32.73 27.90 * 23.67 23.05 * 18.25 19.47 * 15.65 10.02
0.0 m 35.76 * 32.17 28.14 * 23.17 22.94 * 17.96 20.80 * 16.23 9.70
-1.5 m 43.15 * 43.15 * 34.02 * 32.13 27.04 * 23.07 21.42 * 18 20.89 * 17.69 9.13
-3.0 m 37.87 * 37.87 * 30.36 * 30.36 * 23.91 * 23.4 20.57 * 20.57 * 8.23
-4.5 m 29.38 * 29.38 * 23.41 * 23.41 * 19.02 * 19.02 * 6.89

Boom 8.4 m ∙ Arm 3.7 m ∙ Shoe 750 mm ∙ Counterweight 12.76 t

R

10.5 m 15.25 * 15.25 * 14.63 * 14.63 * 9.06

9.0 m 17.95 * 17.95 * 13.90 * 13.90 * 10.17
7.5 m 20.71 * 20.71 * 18.47 * 18.47 * 17.01 * 15.53 13.63 * 13.63 * 10.96
6.0 m 22.52 * 22.52 * 19.41 * 19.41 * 17.35 * 15.18 13.67 * 12.87 11.50
FO

4.5 m 24.49 * 24.49 * 20.48 * 18.75 17.86 * 14.69 14.00 * 12.00 11.83
3.0 m 26.09 * 23.34 21.41 * 17.91 18.30 * 14.19 14.64 * 11.53 11.95
1.5 m 26.88 * 22.31 21.92 * 17.22 18.47 * 13.76 15.63 * 11.42 11.88
0.0 m 26.68 * 21.71 21.80 * 16.76 18.16 * 13.46 15.67 * 11.67 11.62
-1.5 m 31.29 * 30.12 25.46 * 21.48 20.88 * 16.55 17.09 * 13.36 15.37 * 12.36 11.14
-3.0 m 33.04 * 33.04 * 28.04 * 28.04 * 23.16 * 21.56 18.91 * 16.61 14.81 * 13.68 10.43
-4.5 m 27.13 * 27.13 * 23.42 * 23.42 * 19.41 * 19.41 * 15.18 * 15.18 * 13.70 * 13.70 * 9.41
-6.0 m 16.64 * 16.64 * 13.05 * 13.05 * 11.34 * 11.34 * 7.98
T

Boom 8.4 m ∙ Arm 3.7 m ∙ Shoe 900 mm ∙ Counterweight 12.76 t

10.5 m 15.25 * 15.25 * 14.63 * 14.63 * 9.06
9.0 m 17.95 * 17.95 * 13.90 * 13.90 * 10.17
O

7.5 m 20.71 * 20.71 * 18.47 * 18.47 * 17.01 * 15.73 13.63 * 13.63 * 10.96
6.0 m 22.52 * 22.52 * 19.41 * 19.41 * 17.35 * 15.38 13.67 * 13.05 11.50
4.5 m 24.49 * 24.49 * 20.48 * 18.99 17.86 * 14.89 14.00 * 12.17 11.83
3.0 m 26.09 * 23.64 21.41 * 18.15 18.30 * 14.39 14.64 * 11.7 11.95
N

1.5 m 26.88 * 22.62 21.92 * 17.46 18.47 * 13.96 15.63 * 11.6 11.88
0.0 m 26.68 * 22.01 21.80 * 17.00 18.16 * 13.66 15.67 * 11.85 11.62
-1.5 m 31.29 * 30.53 25.46 * 21.78 20.88 * 16.79 17.09 * 13.56 15.37 * 12.55 11.14
-3.0 m 33.04 * 33.04 * 28.04 * 28.04 * 23.16 * 21.87 18.91 * 16.85 14.81 * 13.88 10.43
-4.5 m 27.13 * 27.13 * 23.42 * 23.42 * 19.41 * 19.41 * 15.18 * 15.18 * 13.70 * 13.70 * 9.41
-6.0 m 16.64 * 16.64 * 13.05 * 13.05 * 11.34 * 11.34 * 7.98

A
: Rating over front.
: Rating over side or 360°.

1. Lifting capacities are in compliance with ISO 10567:2007(E).

2. The load point is at the end of the arm.
3. * = The nominal loads are based on hydraulic capacity.
B 4. The nominal loads shown do not exceed 75% of tipping loads or 87% of hydraulic lifting capacity.
5. For lifting capacity with bucket, simply subtract the actual weight of the bucket from the values.
6. The configurations indicated do not necessarily reflect the standard equipment of the machine.

| 19
 DIMENSIONS

L1

W1 L1'

W2
L2

G
W3

N
H1''
H1
H1' H3

TI
H5 H4
H2
W4
W6

IN
W5 L4

L3
PR
DIMENSIONS

Unit Mono boom

Boom length mm 7250 8400
Arm length mm 2900 3750
R

Bucket capacity (SAE) m³ 6.8 5.4

L1 Overall length mm 13800 14550
FO

Boom mm 5090 5450

Hose mm 5150 5550
H1 Overall height
Cab mm 3615
Hand/guard rail mm 4175
W1 Overall width (shipping) mm 3440
Rear swing radius mm 4620
T

H2 Ground clearance mm *860

L2 Rear end distance mm 4565
W2 House width mm ***3410/4450
O

W3 Cab width mm 1010

H3 Height over hood (bonnet) mm 3785
N

H4 Counterweight clearance mm *1560/1615

H5 Track height mm *1350/1405
L3 Track length mm 6341
L4 Tumbler distance mm 5100
Undercarriage width (without step) mm **3440/4200
W5
Undercarriage width (with step) mm **3732/4492
Shoe width mm 650
W6
Grouser height mm 52

* without grouser
** retracted / extended
*** without / with catwalk

20|
WORKING RANGE

F
G

G
D

N
H

TI
J
C
L
M

K 8'
I
B

IN
PR
A

WORKING RANGE

Unit Mono boom

Boom length mm 7250 8400
Arm length mm 2900 3750
R

Bucket capacity (SAE) m³ 6.8 5.4

A Max. digging reach mm 12430 14275
FO

B Max. digging reach (ground) mm 12110 14000

C Max. digging depth mm 7260 8795
D Max. loading height mm 8100 9440
E Min. loading height mm 3910 4210
F Max. digging height mm 12425 13840
G Max. bucket pin height mm 10515 11862
T

H Max. vertical wall depth mm 2965 4470

I Max. radius vertical mm 10995 12265
J Max. digging depth (8' level) mm 7110 8665
O

K Min. radius (8' level) mm 4410 5290

L Min. digging reach mm 1970 3365
N

M Min. swing radius mm 5345 6295

d Bucket angle ° 145.3 143.8

DIGGING FORCES (ISO)

Unit Mono boom

Boom length mm 7250 8400
Arm length mm 2900 3750
Bucket capacity (SAE) m³ 6.8 5.4
BUCKET ton 42.96 48.2
ARM ton 40.8 36.73

| 21
 STANDARD AND OPTIONAL EQUIPMENT
● Standard ○ Optional
Engine Other
● Perkins 2806J, Stage V compliant, SCR, DOC and DPF post-treatment, ● 7250 mm boom – 2900 mm arm – 12760 kg counterweight
water-cooled diesel engine with wastegate turbocharger and air-to-air ● DEVELON Fleet Management Web (telematic system)
intercooler ● Double element air cleaner with 2-stage filtration
● Water separator
Hydraulic system
● Fuel filter

G
● Boom and arm flow regeneration
● Dust screen for radiator/oil cooler
● Boom and arm holding valves
● Hydraulic oil tank air breather filter
● Swing anti-rebound valves
● Self-diagnostic function
● Spare ports (control valve)

N
● Alternator (24 V, 115 A) - Battery (2 × 12 V, 200 Ah)
○ 2-way auxiliary hydraulic line and breaker piping (pedal & joystick controlled)
● Automatic lubrication system
○ Hydraulic piping for rotating tool (Pero)
● Alarm for travel & swing
Cab & Interior

TI
● Fuel filler pump
● Pressurized, sound-insulated and CabSus mounted cab ● Additional mirror
● Adjustable air suspension seat with headrest and adjustable armrests ○ 8400 mm boom
● Air conditioner & heater ○ 3750 mm arm
● Pull-up type front window and removable lower front window ○ Develon buckets: full range of GP, HD & rock buckets

IN
● Intermittent windshield wiper ○ Hydraulic piping for quick-coupler
● Rain shield ○ Additional filter for breaker piping
● Sun visor ○ Double pump flow
● Sun roof ○ Straight travel pedal
PR
● Joystick lever with 3 switches ○ Air compressor
● DEVELON Smart Touch – 8" touch screen, all-in-one
Undercarriage
● 2 operating modes & 2 working modes
● Hydraulic track adjuster
● Electric horn
● Track guards
● Ceiling light
● Greased and sealed track links
● Cup holder
● 650 mm double grouser shoe
● Multiple storage compartments (e.g. document holder under seat)
○ 750 mm and 900 mm double grouser shoe
● Storage area (tools, etc.)
R

● Heating and cooling lunch box List of attachments

● Flat, spacious, easy-to-clean floor ○ Develon S-class PLUS bucket (soft rocks), width 2420 mm,
● Keyless start (Develon Smart Key) & remote door lock/unlock capacity 6.80 m³, 5 severe duty teeth
FO

● E/G RPM control dial ○ Develon S-class PLUS bucket (soft rocks), width 2040 mm,
● 12 V spare power socket capacity 5.40 m³, 5 severe duty teeth
● Serial communication port for laptop PC interface
● Remote radio ON/OFF switch
● Radio + MP3 (Stereo) with Bluetooth streaming
○ Lower wiper

Safety
T

● Large handrails and steps

● Convex metal anti-slip plates
● Seat belt
O

● Hydraulic safety lock lever

● Safety glass
● Hammer for emergency escape
● Right and left rear-view mirrors
N

● Side mirror
● Battery protector cover
● Engine overheat prevention system
● Engine restart prevention system
● Rotating beacon
● Overload warning device
● Full LED lights pack: 5 lamps on the superstructure, 2 on the boom,
6 on the cabin
● 360° all-around view camera (AVM)
○ FOGS cab - top guard (ISO 10262)
○ Front window upper and lower guards

22|
JOB SITE WORK EFFICIENCY
MANAGEMENT MANAGEMENT

G
N
PROACTIVE
PREVENTIVE SERVICE

TI
MAINTENANCE

IN
PR
No
.1
R
FO

OPERATION TREND
Total operation hours and operation hours by mode

FUEL EFFICIENCY*
Fuel level and fuel consumption

LOCATION
T

GPS and geo-fence

REPORTS
O

Operation report & utilization

WARNING & ALERT

Detect machine warnings, antenna disconnection,
N

and geo/time fence

FILTER & OIL MANAGEMENT

Preventive maintenance by item replacement cycle

TELEMATICS TERMINAL TELECOMMUNICATION DEVELON FLEET MANAGEMENT WEB

Terminal device is installed and Develon provides dual-mode Users can monitor machine status from Develon
connected to a machine to capture (Mobile, Satellite) communication to Fleet Management Web.
machine data. maximize communication coverage.

*Functions may not be applied to all models. Please contact your sales representative for more information on this feature.
| 23
 OPTIONAL ATTACHMENTS

A wide range of attachments is available for your

Develon excavator.
Choosing our attachments ensures you’ll have

G
the maximum performance and tranquility of use.

N
TI
DEVELON H-CLASS BUCKETS
IN
PR
(EARTH MOVING)
R
FO

DEVELON G-CLASS BUCKETS GRADING BUCKETS

(ECONOMY)
T
O

DEVELON S-CLASS BUCKETS PIN-ON QUICK COUPLERS DEVELON ORANGE PEEL GRAPPLES
N

(SOFT ROCKS)

DEVELON X-CLASS BUCKETS DEVELON HB BREAKERS DEVELON SORTING GRAPPLES

(ALL TYPES OF ROCKS)

24|
 N
O
T
FO
R
PR
IN
TI
N
G

| 25
26|
N
O
T
FO
R
PR
IN
TI
N
G
 N
O
T
FO
R
PR
IN
TI
N
G

| 27
 N
O
T
FO
R
PR
IN

Czech Republic
DX1000LC-7
DISCOVER MORE:
TI
N

HD Hyundai Infracore Europe s.r.o.

©2023 DEVELON D4601062-EN (07-23)

G

IBC - Pobřežní 620/3, 186 00 Praha 8-Karlín

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice.
Specification(s) for your individual Develon equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors. Pictures of Develon units may show other than standard equipment.