Wind Load Calculations

For
Playground Equipment

At

Cherry Grove Park

9001 SW 97th Avenue
Miami, Florida 33155

Dale Mudrak P.E.

Florida Professional Engineer No. 42669

Revised
July 27, 2024
16508 Hamilton Drive
Orlando FL, 32833
321-201-8749
Digitally signed
by Dale V Mudrak
Date: 2024.07.27
21:05:15 -04'00'
Dale V. Mudrak P.E, State of Florida, Professional Engineer, License No. 42669
Accuracy Statement
This item has been electronically signed and sealed by Dale V. Mudrak, PE. On (This
Date) using a Digital Signature. Printed copies of this document are not considered
signed and sealed and the signature must be verified on the electronic copies.

Wind Load Calculations - Cherry Grove Park revised.doc Page 1

 Index

Page 1 Cover page

Page 2 Index
Page 3 Design Criteria
Page 4 Design Method/Wind load Pressure
Page 5 Foundation Schedule
Page 6 Double Tower with Bridge Playground - Uplift
Page 7 Double Tower with Bridge Playground - Overturning
Page 8 Typical Footer Details
Page 9 Exhibit “A” Wind Uplift Diagram
Page 10 Exhibit “B” Lateral Wind Loads

Appendices
1. Rendering
2. Installation Specifications
3. Color Rendering
4. Installation Specifications
5. ADA Evaluation
6. Footer Layout
7. Site Plan with Footer Layout

Dale V. Mudrak P.E.

16508 Hamilton Dr
Orlando FL 32833
Tel 321-201-8749
FL PE # 42669

Wind Load Calculations - Cherry Grove Park revised.doc Page 2

 Design Criteria

The following design criteria was utilized in these calculations:

1) Ultimate Design wind speed of 180 Miles Per Hour (MPH) for structures. Ultimate
wind speed of 180 MPH is equivalent to 140 MPH normal design wind speed
according to 2023 Florida Building Code 8th Edition equation 16-17. However,
Section 1620.2 requires a minimum wind speed of 165 MPH.
2) Formula for pressure developed by the wind, P=.00256(V)^2*(H/33)^0.29
Where:
P = pressure in pounds per square foot
V = wind speed in miles per hour
H= height in feet above the ground surface (less than 19 feet)
3) All of the Play Equipment Structure will be less than 19 feet in height.
4) All concrete shall be 3000-PSI minimum.
5) Geneeral existing soil conditions include sand, silt and traces of rock. These
conditions are adequate to support a design load of 1500 PSF. Also see Soils report
from Ardaman and Associates dated June 16, 2023. Soil Bearing Pressure 1500 PSF
6) Calculations were done by analyzing the worst case wind direction for each set of
equipment.
7) Calculations were prepared in accordance to the 2023 Florida Building Code 8th
Edition.

Wind Design Data

1. Ultimate Design Wind Speed (MPH): 180

2. Normal Wind Design speed (MPH) : 165
3. Occupancy category - Playground
4. Wind Importance Factor: 1.0
5. Wind Exposure Category: C
6. Internal pressure coefficient - NA (Open structure)
7. Enclosure Classification: Open
8. Components and Cladding (PSF): 48.0 to -48.0
9. Risk Category I

Dale V. Mudrak P.E.

16508 Hamilton Dr
Orlando FL 32833
Tel 321-201-8749
FL PE # 42669

Wind Load Calculations - Cherry Grove Park revised.doc Page 3

 Design Method

For this Play Equipment, we will analysis two (2) wind loading conditions. The first is
uplift (Vertical wind loading) and second is overturning (horizontal wind loading).

Vertical Wind Loading

In this condition we will compare the uplifting forces to the total pullout resistance of the
foundation. The total uplifting force is equal to the wind pressure times the area in
vertical direction. The total pullout resistance of the foundation is equal to the weight of
the foundation plus the pullout resistance of the foundation from the adjoining soil. The
weight of the foundation is equal to the volume of each support post’s concrete footer,
times the density of concrete, times the number of support posts. The total pullout
resistance of the foundation divided by the uplifting wind force is equal to the factor of
safety. See Exhibit “A”. The weight of the equipment was not included in our
calculations. If the weight of the equipment was factored in, the factor of safety would be
increased.

Horizontal Wind Loading

In this condition, we will compare the lateral forces acting on the Equipment to ensure
that the structure does not overturn. This is accomplished by summing all of the forces
acting on the structure about a single point “M”. The sum of the forces about “M” from
the weight of the structure, divided by the sum of the forces about “M” from the wind
loading will equal the factor of safety. See Exhibit “B”.

Wind Load Pressures

P=.00256(165)^2*(9/33)^0.29
=.00256(27,225)*(.69)
= 47.82

For design purposes of this project, we will use a pressure of 48.0 pounds per square foot.

Dale V. Mudrak P.E.

16508 Hamilton Dr
Orlando FL 32833
Tel 321-201-8749
FL PE # 42669

Wind Load Calculations - Cherry Grove Park revised.doc Page 4

 Foundation Schedule

Structure Foundation Min Width Min Depth

Configuration Inches inches

Double Tower with Bridge

Round 12 24
Rectangular 12 by 12 24
Rectangular 12 by 20 24

Swing Rectangular 26 by 30 24

Racer Springer Rectangular 26 by 26 26

Custom Maxite Rectangular 48 by 48 24

SEE FOOTER LAYOUT SHEET FOR DETAILED FOOTER SIZES

AND LOCATIONS

Dale V. Mudrak P.E.

16508 Hamilton Dr
Orlando FL 32833
Tel 321-201-8749
FL PE # 42669

Wind Load Calculations - Cherry Grove Park revised.doc Page 5

 Typical Footer Detail

Note utility lines less than 3 inches in diameter

may pass through foundation provided that they
are sleeved or are wrapped in filter fabric
1) All concrete to be minimum 3000 PSI
2) Based on Sandy soil conditions,
if any organic materials are encountered, the Engineer
shall be notified so that conditions may be reviewed.
Varies 3) Contractor shall locate all underground utilities
20 feet prior to any excavation.
4) See Footer layout and page 5 Foundation Schedule
Max. for footer sizes.
5) Soil Bearing Pressure 1500 PSF
6) Giant Dome Footers to have a min # 4 Rebar at
8 inches on center each way.
Support Post

solid concrete
block Spacer
(Min 3000 PSI)

8 inches of
Engineered Wood Fiber

Soil,
Concrete Sand
Varies
Dale V. Mudrak, PE
16508 Hamilton Dr
Orlando, Fl 32833
321-201-8749
Varies FL # 42669
Page 8
 Exhibit "A"
Dale V. Mudrak
Wind
FL # 42669
uplift
16508 Hamilton Dr
Orlando Fl 32833
321-201-8749

8 inches of EWF

Soil Resistance Soil,

Concrete Sand
Varies
All Concrete shall be
3000 PSI
Weight of Concrete
Varies
Page 9
 Exhibit "B"

Wind Load
Dale V. Mudrak
FL # 42669
16508 Hamilton Dr
Orlando, Fl 32833
321-201-8749
M(soil) + M(concrete) > M(wind)

Varies
Support Post

8 inches of EWF

Soil,
Concrete Sand
Varies Soil Resistance
Pressure

Moment Center
Varies Weight
of
Concrete
Page 10
 Overview

PCM200531
ID 20270956
GRABAU
2024-02-23

Concept Colour: Wood

Secondary Colour: Anthracite
Accent Colour: Grey
Foundation: 20-60 mm
Norm: ASTM
Units: inch
Post Material: Wood
Post Colour: Brown

WEEK NO. YEAR

PRODUCT
NUMBER

1 / 12
 Overview - Layout

PCM200531
ID 20270956
GRABAU
2024-02-23

Scale: MAX
Units: inch

Safety zone
- Norm: ASTM
- Perimeter: 79 ft
- Area: 431.6 ft²

P11 Concrete
- Volume: 0 CU.FT.
P12 P1 P16
P10

P12;2295.3;765.1;0
P11;1754.3;1306.1;0
P1;3060.4;765.1;0
P4;765.1;-765.1;0
P9;2295.3;-765.1;0
P8;3060.4;-765.1;0
P7;3060.4;0;0
P6;2295.3;0;0
P10;-541;541;0
P3;765.1;0;0
P5;0;-765.1;0
P2;0;0;0
P2 P3 P6 P7P15

Use the specified quality of concrete

P5 P4 P9 P8 in accordance with all specifications
from the concrete supplier taking
the nature of the product to be
P13P14 installed into account.

P17P18

3 / 12
Safety zone / Fall height

PCM200531
ID 20270956
GRABAU
2024-02-23

Scale: MAX
Units: inch

ASTM
* Fall height
** Total height

5 / 12
COR494801
ID ----
MARDRE
2022-03-25

Colorline: Luna
Foundation: 40 CM
Norm: WW
Units: cm/inch
Post Material: ----

Page 1
COR494801
ID ----
MARDRE
2022-03-25

Page 2
COR494801
ID ----
MARDRE
2022-03-25

Page 3
COR494801
ID ----
MARDRE
2022-03-25

Page 4
EN 1176
COR494801
ID ----
MARDRE
2022-03-25

Scale: MAX

Foundation: 40 CM

All Unspecified Holes

= 39

Beton
Beton
Concrete
Hormigón
Béton
Cemento
Beton
Betong

3,456 m³ 122,047 cu.ft.

Safety Zone
Perimeter: 37 m
Area: 96 m²

Page 5
ASTM
COR494801
ID ----
MARDRE
2022-03-25

Scale: MAX

Foundation: 40 CM

All Unspecified Holes

= 39

Beton
Beton
Concrete
Hormigón
Béton
Cemento
Beton
Betong

3,456 m³ 122,047 cu.ft.

Safety Zone
Perimeter: 117 ft
Area: 963,3 ft²

Page 6
CSA Z614
COR494801
ID ----
MARDRE
2022-03-25

Scale: MAX

Foundation: 40 CM

All Unspecified Holes

= 39

Beton
Beton
Concrete
Hormigón
Béton
Cemento
Beton
Betong

3,456 m³ 122,047 cu.ft.

Safety Zone
Perimeter: 36 m
Area: 89,5 m²

Page 7
AS4685
COR494801
ID ----
MARDRE
2022-03-25

Scale: MAX

Foundation: 40 CM

All Unspecified Holes

= 39

Beton
Beton
Concrete
Hormigón
Béton
Cemento
Beton
Betong

3,456 m³ 122,047 cu.ft.

Safety Zone
Perimeter: 37 m
Area: 96 m²

Page 8
EN 1176
COR494801
ID ----
MARDRE
2022-03-25

Scale: 1:150

INCH 1
CM 1 2

Page 9
ASTM
COR494801
ID ----
MARDRE
2022-03-25

Scale: 3/32" = 1'-0"

INCH 1
CM 1 2

Page 10
CSA Z614
COR494801
ID ----
MARDRE
2022-03-25

Scale: 1:150

INCH 1
CM 1 2

Page 11
AS4685
COR494801
ID ----
MARDRE
2022-03-25

Scale: 1:150

INCH 1
CM 1 2

Page 12
 COR494801
ID ----
MARDRE
2022-03-25

CRS494802-0000

4x CRA494801-0400

CRS494801-0000

CRN494801-M606

Page 13
Racer
ELE400002-12DT

Item no. ELE400002-12DT

General Product Information

Dimensions LxWxH 2'4"x1'2"x2'3"

Age group 2-5
Play capacity (users) 1
Item color n

1 1 4

The Racer with its whimsical rodeo look temperature and flexibility. The slightly sloped the ability to sit still and concentrate. The Racer
attracts toddlers for a rides again and again. seat provides a seating destination that offers children more than a mere fun ride.
Apart from its appealing shapes, the Racer ensures hours, years and decades of fun. The
offers tactile variation with its rubber hand soothing, rocking movement of the Racer trains
holds and smooth body. Tactile richness is a the sense of balance and the spatial
main motivator, especially in younger children. awareness. These are both crucial for body
It supports their understanding of material confidence, e.g. fall prevention. A well
characteristics such as weight, smoothness, developed sense of balance is fundamental for

1 / 02/29/2024 Data is subject to change without prior notice.

Racer
ELE400002-12DT

Item no. ELE400002-12DT

Installation Information
Max. fall height 1'5"
Safety surfacing area 153ft²
Total installation time 1.9
Excavation volume 0.37yd³
Concrete volume 0yd³
Footing depth (standard) 2'2"
Shipment weight 86lbs
Anchoring options In-ground a
The seat is made of recyclable PE and molded KOMPAN Springs are made of high quality The springs are fixed by unique anti pinch
in one piece with a minimum 5mm wall spring steel according to EN10270. The springs fittings for maximum safety and long lifetime.
thickness. PE has high impact resistance are cleaned by phosphating before they are
Warranty Information
across a wide temperature span which ensures painted with an epoxy primer and a polyester
vandal resistance in all locations. powder coating as top finish. The springs are Hollow PE Parts 10 Years
fixed by unique anti pinch fittings for maximum Springs 5 Years
safety and long lifetime. Hot dip galvanized steel Lifetime
Handle 10 Years
Spare Parts Availability 10 Years

Accessible Accessible
Accessible
Elevated ground ground
elevated
activities 0 level level play
activities
activities types
Present 0 1 1
Required 0 1 1

Handles are made with a molded PP insert and The steel surfaces are hot-dip galvanized inside KOMPAN GreenLine versions are designed with
an outer layer of soft TPV rubber. The handles and outside with lead-free zinc. The the most environmentally friendly materials with
are attached to the pipe with a galvanized steel galvanization has excellent corrosion resistance the lowest possible CO2e emission factor such
inlay to ensure strength and durability. in outside environments and requires minimal as EcoCoreTM panels of 100% post-consumer
maintenance. recycled ocean waste.

2 / 02/29/2024 Data is subject to change without prior notice.

Racer
ELE400002-12DT

Total CO₂ Recycled

Cradle to Gate A1-A3 emission
CO₂e/kg
materials

kg CO₂e kg CO₂e/kg %

ELE400002-12DT 93.20 2.50 40.70

The overall framework applied for these factors is the Environmental Product Declaration (EPD), which
quantifies "environmental information on the life cycle of a product and enable comparisons between
products fulfilling the same function" (ISO, 2006). This follows the structure and applies a Life-Cycle
Assessment approach to the entire Product stage from raw material through manufacturing (A1-A3))

3 / 02/29/2024 Data is subject to change without prior notice.

Racer
ELE400002-12DT

* Max fall height | ** Total height | *** Safety surfacing area * Max fall height | ** Total height

Click to see TOP VIEW Click to see SIDE VIEW

4 / 02/29/2024 Data is subject to change without prior notice.

 E400002-01
1
E400020-01
E400002-12
E400020-12

10x20 BB
110020

ELE400002-01:
ELE400020-01:

ELE400002-01 ELE400002-12
ELE400020-01 ELE400020-12
A100-27 A100-40

400010-A2
2 710000

65 cm
2'-2" A100-02
ELE400002-01 ELE400002-12
10x38 BB ELE400020-01 ELE400020-12
110038-A2 B10068-0307 B10070-0307
65 cm
V400002 20021011 AB

2'-2"

ELE400002-12: ELE400002-01:
ELE400020-12: ELE400020-01:
65 cm

45 cm
2'-2"

1'-6"

65 cm 65 cm
2'-2" 2'-2"

Copyright © KOMPAN A/S 1/2

 Spare parts:
Ersatzteile:
Pièces de rechange: 400210
Piezas de recambio: 710000
black
Parti di ricambio: schwarz
400210 noir
Reservedelen: negro
nero
Reservdelar: zwart
svart
Reservedele: sort
A400299-51
10052-06
10051-06
A10013-06

M10x70
10050-06 A100-49
10x85 MB
210085

10x50 MB
210050

10x55 MB
210055
A100-49

10x90 MB
210090

10050-06

10051-06 10052-06

A100-26

A100-28

400110
710000
V400002 20021011 AB

grey
400110 grau
gris
gris
grigio
grauw
grå
grå

2/2 Copyright © KOMPAN A/S

KSW926
ID 20271551
OSCLOP
2024-02-26

Colorline: Anthracite
Foundation: 90 cm
Norm: ASTM
Units: inch
Post Material: GalvanizedColor

Page 1
ASTM

KSW926
ID 20271551
OSCLOP
2024-02-26

Scale: MAX

Foundation: 90 cm

All Unspecified Holes

= 43A

1.168 m³ 41.248 cu.ft.

Use the specified quality of concrete

in accordance with all specifications
from the concrete supplier taking
the nature of the product to be
installed into account.

Safety Zone
Perimeter: 143 ft
Area: 1170.5 ft²

Page 2
ASTM
KSW926
ID 20271551
OSCLOP
2024-02-26

Scale: 3/32" = 1'-0"

INCH 1
CM 1 2

Page 3
 KSW926
ID 20271551
OSCLOP
2024-02-26

SW951029-01 SW990023-01

3x SW950001-02 SW951034-01

2x SW952006-01 SW950005-00

2x SW952007-01 SW990205-0107

SW951031-01

SW950003-00

SW990091-07

2x SW990011-01
 Play Area Accessibility Checklist
Site Name Cherry Grove
KEEP A COPY OF THIS FORM FOR YOUR RECORDS. Age Group 2-5 or 5-12
Play Areas for 2–5 year olds and 5–12 year olds, as well as geographically separated play areas,
Date March 1, 2024
should be evaluated separately. Prepared By JohnSt

Item Number / Name Play Activity Elevated Accessible Ground Accessible Ground Level Play Type

COR105211 Maxite with House Membrane ● ● Climbing/Crawling

PCM200531 Two Towers with Bridge Straight Slide ● ●

Suspension Bridge ● ●
Balcony ● ●
Flower Manipulative Panel ● ●
Rock Climb ● ●
Bench ● ● Gathering
Conveyor Belt ● ● Experimenting

KSW926-20217475 Basic Swing ● ● Swinging

Infant Swing ● ● Swinging
ADA Swing ● ● Swinging
Basket Swing / Shell Basket Swing ● ● Swinging

ELE400002 Racer ● ● Rocking

NOTE: If elevated play components exceed 19, the play area TOTALS 5 5 8 8 5
requires a ramp structure. https://www.access-
Accessible Ground Level Accessible DIFFERENT
board.gov/ada/guides/chapter-10-play-areas/#when-ramps-are- Elevated Activities Elevated Activities Ground Level Ground Level Play Types
required. ADA 2010, 1008.2, Exception #1.

Accessible Elevated Activities Required 3 NOTE: If a ground level play type is present but not
50% of elevated activities must be accessible. accessible and it is the ONLY ONE, an additional ground
Accessible Ground Level Activities Required 5 level play component with the same play type MUST BE
See table for accessibility requirements.
PROVIDED IN THE PLAY AREA TO OFFER EQUITY.
(ADA2010, Chapter 2: Scoping Requirements, 240.2.1.1
Accessible Ground Level Play Types Required 5
Minimum Number and Types)
See table and compare to total number of different ground level play types. The
larger number is the number of ground level play types that must be accessible.

This form is intended to assist the evaluation of accessibility for outdoor play facilities. This form does not represent all factors required for an accessible play facility contained in the regulations,
and therefore is not a guarantee, test, or confirmation of accessibility. Requirements for accessibility include appropriate accessible routes, maneuvering spaces and clear floor and ground
spaces. Play components must include appropriate transfer heights and/or be accessed by ramp where appropriate. Providing and maintaining accessibility is the responsibility of the Play Facility
Owner.
ADA Evaluation

With the introduction of the Americans with Disabilities Act (ADA) in 1990 and the subsequent adoption
of standards specific to play areas, accessibility has become an important issue to everyone.

Below is a chart evaluating the play area for your proposed playground. This evaluation assumes that
proper resilient surfacing within the play site and an accessible route of travel to the play area and
equipment are a part of this proposal package. Also, that no other play equipment is in the site.

This play area meets current ADA requirements.

Play Area for 2-5 Year Olds

Elevated Activities

Ground Level Activities

Ground Level Play Types

0 1 2 3 4 5 6 7 8 9

Elevated Activities Ground Level Activities Ground Level Play Types

Quantity Present in Site 5 8 5
Quantity on Accessible Route 5 8 5
Quantity Required to be Accessible 3 5 5
 Zero Point 0,0
Product no. Number X Y Detail no.
KSW926-CUSTOM_20271551 AA01 71'11" 51'11" Digging Hole_43A
KSW926-CUSTOM_20271551 AA02 81'8" 46'0" Digging Hole_43A
KSW926-CUSTOM_20271551 AA03 91'6" 40'0" Digging Hole_43A
KSW926-CUSTOM_20271551 AA04 101'4" 34'1" Digging Hole_43A
KSW926-CUSTOM_20271551 AA05 98'1" 28'10" Digging Hole_43A
KSW926-CUSTOM_20271551 AA06 88'4" 34'10" Digging Hole_43A
KSW926-CUSTOM_20271551 AA07 78'6" 40'10" Digging Hole_43A
KSW926-CUSTOM_20271551 AA08 68'9" 46'9" Digging Hole_43A
ELE400002-xxDT AB01 89'0" -19'-8" Digging Hole_64
COR105211-xx05 AC01 28'1" -1'-7" Digging Hole_39
COR105211-xx05 AC02 20'1" 3'5" Digging Hole_39
COR105211-xx05 AC03 14'11" -4'-7" Digging Hole_39
COR105211-xx05 AC04 23'0" -9'-8" Digging Hole_39
PCM200531-xx02 AD01 74'6" -16'-9" Digging Hole_6
PCM200531-xx02 AD02 75'8" -16'-11" Digging Hole_6
PCM200531-xx02 AD03 76'8" -13'-5" Digging Hole_1
PCM200531-xx02 AD04 77'0" -10'-11" Digging Hole_1
PCM200531-xx02 AD05 74'2" -13'-2" Digging Hole_1
PCM200531-xx02 AD06 74'6" -10'-8" Digging Hole_1
PCM200531-xx02 AD07 69'3" -12'-7" Digging Hole_1
PCM200531-xx02 AD08 69'6" -10'-1" Digging Hole_1
PCM200531-xx02 AD09 66'9" -12'-4" Digging Hole_1
PCM200531-xx02 AD10 67'0" -9'-10" Digging Hole_1
PCM200531-xx02 AD11 65'5" -7'-11" Digging Hole_1
AA01 PCM200531-xx02 AD12 77'3" -8'-5" Digging Hole_1
PCM200531-xx02 AD13 74'9" -8'-2" Digging Hole_1
A1 PCM200531-xx02 AD14 73'2" -6'-2" Digging Hole_1
PCM200531-xx02 AD15 78'0" -10'-10" Digging Hole_2
AA02
PCM200531-xx02 AD16 78'5" -8'-9" Digging Hole_2
AA08 PCM200531-xx02 AD17 67'1" -13'-10" Digging Hole_3
PCM200531-xx02 AD18 68'6" -13'-11" Digging Hole_3
AA03

AA07

AA04

AA06

AA05

Y
AC02

B1

AC01
Zero Point 0,0
X
AD14
AC03 D1 AD06 AD13 AD12
AD11
AD16
AD10 AD08
AD15
AD09
AD05 AD04
AC04
AD17 AD03
AD18 AD07 AB01 C1

AD01 AD02

EWF SAFETY SURFACING

SURFACE AREA: 4,573 SF
PERIMETER: 380 LF

0 8 16
# Product Number Product Name M.F.H. Count
KSW926-CUSTOM_202
A

B
71551
COR882851-CUSTOM-2
3-Bay, 5-Seat Swing

Custom Maxite with House Membrane

7'11"

7'5"
1

1
Cherry Grove Park 1/8"=1'-0" ON 24" x 36" SHEET

0240226
C ELE400002-12DT Racer 1'5" 1 MANUFACTURER'S SHOP DRAWING:
PCM700882-CUSTOM-2 Custom Two Towers with Bridge FOR USE BY CONTRACTOR, ENGINEER, OR DESIGN PROFESSIONAL OF RECORD. SEE SIGNED SALES
D 1'11" 1 PROPOSAL FOR COMPLETE SCOPE TO BE PROVIDED BY KOMPAN OR REPRESENTING AGENCY. CONFIRM
0230213AP
FINAL PLAN AND SCOPE WITH KOMPAN SALES REP OR PROJECT MANAGER PRIOR TO USE FOR REVIEW,

9101 SW 97th Ave PERMITTING, OR CONSTRUCTION.

TO BE READ CONTINGENTLY WITH KOMPAN'S STANDARDS FOR SITE PREPARATION, MATERIALS AND
INSTALLATION PROCESSES; PROVIDED AFTER EQUIPMENT PURCHASE. A COMPLIANT PLAYGROUND TO
SALES REPRESENTATIVE
Oscar Lopez
SHEET

Miami, FL
KOMPAN'S STANDARDS MUST SATISFY ALL REQUIREMENTS IN THE CODE OF CONDUCT.

SLAB BY OTHERS UNLESS OTHERWISE NOTED. FOR SURFACE MOUNT OPTIONS, THE CONCRETE
REQUIREMENTS MAY BE UP TO 5½" OF 3,500 PSI MINIMUM COMPRESSIVE STRENGTH. CONTACT KOMPAN
REVIEW BY DRAWN BY
DESIGN JonSch
DATE
03/12/2024
K3.0
FOR SPECIFIC PRODUCT REQUIREMENTS. ALL COMPOSITE STRUCTURES SHOWN REQUIRE A SITE GRADE REV. DATE
REV. NO. REV. BY REVISION NOTES

Footing Plan OF 2% MAXIMUM, 1% OPTIMAL. SPECIFICATIONS FOR EACH KOMPAN STRUCTURE MAY BE FOUND AT
KOMPAN.COM/KOMPANMASTER

DIMENSIONS OF PLAY AREA, SIZE AND ORIENTATION, LOCATIONS OF ALL EXISTING UTILITIES, EQUIPMENT
AND SITE FURNISHINGS TO BE FIELD VERIFIED PRIOR TO CONSTRUCTION.
- - - -

LAYOUT IS IN ACCORDANCE WITH ASTM F1487

PREPARED AND PRINTED IN USA BY KOMPAN © 2024 KOMPAN, INC. AUSTIN, TX. USA 800-426-9788
 PROPERTY BOUNDARY LINE

PROPERTY BOUNDARY LINE

ADA ACCESSIBLE PATHWAY

5'-0"

5'-0"
[152cm]
[152cm]
7'-9"
[236cm] ADA ACCESSIBLE PATHWAY

[254
8'-4 ]
cm
"

70'-1 1/4"
[2137cm]
[3894cm]
127'-9"
STAMP

ADA ACCESSIBLE PATHWAY

139'-6 1/4"
[4252cm]
3

113'-1 1/2"
[3448cm]
AREA OF WORK

7'-6"
[229cm] 3

VICINITY PLAN (NOT TO SCALE)

[18 6'-0"
m]
3c

SCOPE OF WORK:
ADA ACCESSIBLE PATHWAY

1
· INSTALL NEW PLAYGROUND EQUIPMENT
· NO TREES TO BE REMOVED

GENERAL DESIGN STANDARDS:

2
· ASTM F1487-21, STANDARD CONSUMER SAFETY PERFORMANCE SPECIFICATION FOR
PLAYGROUND EQUIPMENT FOR PUBLIC USE.
· ASTM F3101-21, STANDARD SPECIFICATION FOR UNSUPERVISED PUBLIC USE
OUTDOOR FITNESS EQUIPMENT
· ASTM F2373-11 (R17), STANDARD CONSUMER SAFETY PERFORMANCE SPECIFICATION
FOR PUBLIC USE PLAY EQUIPMENT FOR CHILDREN 6 MONTHS THROUGH 23 MONTHS
4 · ASTM F1292-18, STANDARD SPECIFICATION FOR IMPACT ATTENUATION OF
SURFACING MATERIALS WITHIN THE USE ZONE OF PLAYGROUND EQUIPMENT.
· ASTM F1951-21, STANDARD SPECIFICATION FOR DETERMINATION OF ACCESSIBILITY
OF SURFACE SYSTEMS UNDER AND AROUND PLAYGROUND EQUIPMENT
· 2010 ADA STANDARDS CHAPTER 2, SCOPING REQUIREMENTS
4 (FOR PLAY: 206, 240; FOR FITNESS: 206, 236)
6'-0
[183cm " 4 · 2010 ADA STANDARDS CHAPTER 4, ACCESSIBLE ROUTES
]
· 2010 ADA STANDARDS CHAPTER 10, RECREATION FACILITIES
(FOR PLAY: 1008; FOR FITNESS: 1004)

ADA ADA ACCESSIBLE PATHWAY

AD ACCESSIBLE
AA NOTES:
CC PATHWAY
ES
S IB EQUIPMENT TRANSFER STATION. REFER TO ADA EVALUATION FOR
LE 1
PA GROUND LEVEL AND ELEVATED ACTIVITIES.
TH
WA 2 EQUIPMENT TRANSFER POINT, CLEAR FLOOR GROUND SPACE 48"X30"
Y
3 BOUNDARY OF PARK
]
[24 '-0"
4cm
8

4 EQUIPMENT USE ZONE

A RY L INE
BO U N D EWF SAFETY SURFACING

TY SURFACE AREA: 4,573 SF

PROPER
[152cm]

PERIMETER: 380 LF
5'-0"

A THWAY
SI B L E P
8'-0"
CES
[244cm
]
ADA AC AVE NUE
96 T H
SW

0 10 20
# Product Number Product Name M.F.H. Count
KSW926-CUSTOM_2027155
A

B
1
COR882851-CUSTOM-2024
3-Bay, 5-Seat Swing

Custom Maxite with House Membrane

7'11"

7'5"
1

1
Cherry Grove Park 3/32"=1'-0" ON 24" x 36" SHEET

0226
C ELE400002-12DT Racer 1'5" 1 MANUFACTURER'S SHOP DRAWING:
PCM700882-CUSTOM-2023 Custom Two Towers with Bridge FOR USE BY CONTRACTOR, ENGINEER, OR DESIGN PROFESSIONAL OF RECORD. SEE SIGNED SALES
D 1'11" 1 PROPOSAL FOR COMPLETE SCOPE TO BE PROVIDED BY KOMPAN OR REPRESENTING AGENCY. CONFIRM
0213AP
FINAL PLAN AND SCOPE WITH KOMPAN SALES REP OR PROJECT MANAGER PRIOR TO USE FOR REVIEW,

9101 SW 97th Ave PERMITTING, OR CONSTRUCTION.

TO BE READ CONTINGENTLY WITH KOMPAN'S STANDARDS FOR SITE PREPARATION, MATERIALS AND
INSTALLATION PROCESSES; PROVIDED AFTER EQUIPMENT PURCHASE. A COMPLIANT PLAYGROUND TO
SALES REPRESENTATIVE
Oscar Lopez
SHEET

Miami, FL
KOMPAN'S STANDARDS MUST SATISFY ALL REQUIREMENTS IN THE CODE OF CONDUCT.

SLAB BY OTHERS UNLESS OTHERWISE NOTED. FOR SURFACE MOUNT OPTIONS, THE CONCRETE
REQUIREMENTS MAY BE UP TO 5½" OF 3,500 PSI MINIMUM COMPRESSIVE STRENGTH. CONTACT KOMPAN
REVIEW BY DRAWN BY
DESIGN JonSch
DATE
03/12/2024
K4.0
FOR SPECIFIC PRODUCT REQUIREMENTS. ALL COMPOSITE STRUCTURES SHOWN REQUIRE A SITE GRADE REV. DATE
REV. NO. REV. BY REVISION NOTES

Permit Plan OF 2% MAXIMUM, 1% OPTIMAL. SPECIFICATIONS FOR EACH KOMPAN STRUCTURE MAY BE FOUND AT
KOMPAN.COM/KOMPANMASTER

DIMENSIONS OF PLAY AREA, SIZE AND ORIENTATION, LOCATIONS OF ALL EXISTING UTILITIES, EQUIPMENT
AND SITE FURNISHINGS TO BE FIELD VERIFIED PRIOR TO CONSTRUCTION.
- - - -

LAYOUT IS IN ACCORDANCE WITH ASTM F1487

PREPARED AND PRINTED IN USA BY KOMPAN © 2024 KOMPAN, INC. AUSTIN, TX. USA 800-426-9788