User Manual

ASSEMBLE THE BIKE.

Zet de fiets in elkaar. / Assemblez le vélo. / Montieren Sie das Fahrrad.
Assembla la bici. / Monta la bicicleta.

C H A R G E TO 1 0 0 % .
Opladen tot 100%. / Chargez le vélo à 100 %. / Laden Sie auf 100 %.
Caricala al 100%. / Cárgala al 100 %.

D OW N LOA D T H E B I R D A P P .
Download de Bird App. / Téléchargez l'application Bird. / Laden Sie die
Bird-App herunter. / Scarica l'app Bird. / Descarga la aplicación Bird.

PA I R YO U R B I K E BY S C A N N I N G T H E Q R C O D E .
Koppel je fiets door de QR code te scannen. / Associez votre vélo en
scannant le code QR. / Koppeln Sie Ihr Bird Bike, indem Sie den QR-Code
scannen. / Paga la bici scansionando il codice QR. / Escanea el código QR
para emparejar la bicicleta.

V I S I T S U P P O RT . B I R D . C O F O R M O R E I N F O .
Bezoek support.bird.co voor meer info. / Visitez le site support.bird.co pour plus d'informations. / Weitere Informationen
finden Sie unter support.bird.co. / Visita support.bird.co per maggiori informazioni. / Accede a support.bird.co para obtener
más información.
V-Frame User Manual
Model: VA00066/VA00071/VA00119 (Grey), VA00067/VA00072/VA00120 (White)

Please read this manual very carefully before using the

product. The manual contains important instructions for
the safe use and longevity of your bike.

If you need any type of support or warranty information

for your Bird Bike, please contact the local dealer or
retailer where you purchased the product.
V-FRAME

3
1 Assembly Prep
To prepare for the assembly of your Bird Bike, first take
out all pieces of the Bird Bike from the box and remove all
packaging. Also, open the accessory box and remove all tools,
Saddle
parts and everything else that’s inside of it.

Tail light

Rear fender

Rear rim

Tire
2.5 mm Pedals 4mm / 5mm / L-key Phillips 13mm / 15mm
Allen key (x2) 6mm Y-wrench Screwdriver Two-sided
Wrench
Rear disc brake

Motor

Kickstand

Front Sprocket
Wheel Reflectors Rear and Front Battery Power Supply This Manual
(x 2) and Reflectors Keys and Cable
Crank
fasteners (x 2)

Pedal

V- FR AM E
 Handlebar
Frame
Right-hand brake
(rear wheel)

Left-hand brake
(front wheel)

Front light

Front fender

Front rim

Fork

Front disc brake

Battery

5
2 Install the handlebar 2.5 mm Allen key

Remove Display from the Handlebar

Use the 2.5mm Allen Key to remove the screw that’s in the
back of the display, which will be sitting in the handlebar
cavity, but not installed.

V- FR AM E
 Y-wrench

Install the Handlebar

Use the 5mm end of the tool to remove the hex bolt
from inside the black disc top cap that's sitting on
the protective cardboard tube. The black disc top
cap and cardboard sleeve will not be used during
the assembly, so please set aside along with the box
and other packaging.

After removing the hex bolt, black disc top cap, and
protective cardboard tube, install the handlebar
on top of the steerer tube. Once the handlebar
Target torque Target torque
is installed and lined up properly with the tire and
5±0.5Nm 12±0.5Nm
frame, re-insert the hex bolt through the handlebar
and into the steerer tube.

Use the 5mm end of the tool to gently tighten the

hex bolt into the handlebar so that there’s no play
between the fork and frame.

Finally, make sure the handlebar, frame, and front

wheel are still aligned and tighten the two steering
stem screws with the 5mm end of the tool so the
handlebar stays in place.
7
3 Install the front wheel Cap Nut
and Washer
Wrench

Be sure to remove the plastic front rotor protector from the front
wheel axle before starting this step.

Align the front wheel axle so that it’s inside of the fork slots on both
sides. The side with the brake rotor should be aligned so that it fits
inside the front disc brake.

Once the fork slots are sitting on both sides of the axle, install
washers at both ends and tighten up the cap nuts on the outside
using the 15mm end of the wrench.

After installing the front wheel,

extend the kickstand for better Target torque
stability and easier assembly 20-25N.M
during the next steps.

V- FR AM E
4 Attach the front fender Y-wrench

Attach the front fender to the fork by using the screws that are already in the fork legs.
Use the 4mm end of the tool to remove the two screws from the fork legs and then
tighten the screws through the holes at the end of the fender mounts.

Using the 4mm end of the tool remove the screw that’s on the top of the backside of
the fork and tighten the screw through the fender mount bracket on top of the fender
so that it’s secured tightly to the back of the fork.

Target torque
5-6N.M
When tightening the fender, avoid
rubbing the tool on the frame so
the paint doesn’t get scratched.
Also, don’t over tighten the screws
to avoid stripping the holes.

Target torque
5-6N.M 9
5 Adjust the seat Y-wrench

Remove the soft rubber cap located on the frame just below the seat column to
reveal the seat clamp screw.

Use the 5mm end of the Y-wrench to loosen the seat clamp screw. Adjust the
seat post to the preferred height. Once positioned, tighten the seat clamp
screw until secure and return the rubber cap in to the frame.

Warning: do not extend the

seat post farther than the
minimum insertion line that
is indicated on the seat post.

Target torque
12±0.5Nm

V- FR AM E
6 Attach the pedals Wrench Pedal

Install the left and right pedals by screwing them into the crank.

Pay attention to which pedal is being installed on the left and

the right as the left pedal is reverse threaded so it is tightened
counter-clockwise. You can tell the two pedals apart by looking
for the “R” on the right pedal and “L” on the left.

After the pedals are screwed on by hand, use the 15mm end of
the wrench to give the pedals a final tightening.

Target torque
30-35N.M 11
7 Install the display 2.5 mm Allen key

For the final step before powering on your Bird Bike, reinstall the display back into the
handlebar so that the Bird logo is at the bottom. Be sure to not pinch the cable inside of
the handlebar while reinstalling. Once reinstalled, use the 2.5mm Allen key to replace and
tighten the screw under the display to a maximum torque of 1.5 N.m (stop when you feel light
resistance). Ensure the display edges are flush with the handlebar before tightening the
screw. If not flush, remove display and ensure the cables are not pinched below the display.

Connect the one end of the power cable coming from the bottom of the display to the other
end of the power cable that is coming out of the bottom of the frame. At this point you can
power on your Bird Bike, but be sure to read through the rest of this manual before riding.

Max torque
1.5 N.m

V- FR AM E
App pairing instructions
1. Download or update the Bird app.

2. Make sure that your phone's Bluetooth is enabled.

If not, turn on your Bluetooth.

3. Open the Bird app to sign in. If this is your first time
using the Bird app, create an account.

4. Press the power button on the left handlebar to turn

on your Bird Bike. This will allow it to be discovered by
the Bird app.

5. Find the QR code for your Bird Bike located inside the
toolkit or on front cover of the owner’s manual. Can’t
find your code? Please contact your retailer.

6. Open the Bird app and scan the QR code to pair with
your Bird Bike.

7. After scanning, a "vehicle pairing successful"

message will pop-up. You can now view the details of
your Bird Bike and use the available features.

8. After closing the Bird app, access the My Bird Bike

screen by selecting "Private Birds" in the main menu.

13
Charging the battery
Charger and battery overview

Charger 2A

Battery 9.6Ah

Full charge time 5 hours

1. To charge the battery while it is on the bike

- Insert the power plug into an outlet and make
sure the light on the power supply is green. This
means the power supply is working.
- Insert the charging plug into the battery and
make sure the light on the power supply turns
red. This means that the Bird Bike battery is
charging.
- An icon will also appear on the dash display that
the bike is charging, along with the percentage
of charge (0-99).
- When the dash display shows 99, the Bird Bike is
fully charged. The light on the power supply will
also change from red to green.
- Once fully charged, remove the charging plug
from the battery. Press the power button on the
left handlebar and you’re ready to ride.
2. To charge the battery while it is off the bike
Remove the battery from the Bird Bike with the keys that were included
in the toolbox.

After turning the key in the lock, the battery will automatically pop out
of the frame. Carefully remove the battery and press the button on the
end, the battery light will illuminate:

-Flashing Red: the battery has no charge

-Solid Red: the battery has low charge
-Solid Green: the battery has partial charge
-Solid Blue: the battery is fully charged

3. Once the battery is charged

Insert the battery back into the Bird Bike by matching the pins on the
bottom with the bottom of the space in the frame. If installed correctly,
the battery will click and automatically lock into place. Press the power
button on the left handlebar and you’re ready to ride.

Charger Specifications

Manufacturer Dongguan Angdi Technology Co., Ltd.

WARNING: Do not install a damaged battery
Model BC266420200 WARNING: Do not tamper or alter battery

Input 90-264V AC WARNING: Do not repair or alter the vehicle system

except as indicated in this manual
Output 42V DC, 2.0A WARNING: Only use power supply and battery specified
Charging Temperature 0-40°C (32-104°F) WARNING: Do not charge if wet
WARNING: Ambient temperature must be 0-40°C
Operating Temperature 0-40°C (32-104°F) (32-104°F) during charging. The battery will not charge
outside of these temperature limits.
Storage Temperature 0-40°C (32-104°F)
15
Set the alarm feature
The alarm can be armed after your Bird App is paired and
connected via Bluetooth to the Bird Bike.

1. Open up the My Bird Bike screen via the Private Birds section
in the Bird App.

2. To arm the alarm, swipe the slider at the bottom of the My

Bird Bike screen to the right.

3. If the Bird Bike is moved after the alarm is armed, the alarm
will sound.

4. To disarm the alarm, open up the My Bird Bike screen and

swipe the slider at the bottom to the left.

5. After disarming the alarm, if the Bird Bike is moved the

alarm will not sound.
Install wheel reflectors
To install a reflector on both the front and rear wheels, place the reflector
flat against the outside of one of the spokes.

Tighten the plastic screw from the inside of the spokes until the reflector
is secured against the spoke.

17
 F U N CT I O N S OV E R V I E W

Battery capacity display

Speed Switch between

display mph and km/h

Power button Walk mode Assist level

+ button
- button Mileage display

Head light
Error warning
Operating Options

P O W E R O N /O F F WA L K M O D E
After long pressing the power button, Press and hold the - button for longer
the Bird Bike will be turned on. While the than 2 seconds to put your BirdBike into
power is on, press and hold the power button Walk Mode. In Walk Mode, the display will
again to turn off the power. show the push symbol and you will receive
power assistance while pushing the BirdBike
The power will automatically shut off after in more difficult situations, like going uphill.
5 minutes if not being used. When you release the Button, Walk Mode will
automatically turn off.

The power-assisted Walk Mode function should

D I S P L AY I N T E R F A C E only be used while pushing the electric vehicle
and never used while riding.
After the Bird Bike is turned on, the display
defaults to showing real-time speed and
total distance traveled (miles or km). With a
short press of the power button you can
toggle through the total distance (miles/km)
and single trip distance (miles/km).

19
T U R N O N /O F F T H E H E A D L I G H T S ASSIST LEVEL
The headlight will automatically turn on Short press the + / - buttons to
when the Bird Bike turns on. When the switch the assist level of the Bird Bike and
headlight is on, the display brightness will change the output power of the motor. Level
also automatically dim. Ensure the headlight 0 is no assistance, and level 5 offers the
is on before riding in the dark or whenever highest amount of assist. The default level
natural light is insufficient (such as bad when the Bird Bike is first turned on is level 5,
weather), or where local law requires. Press and each subsequent time it will default to
and hold the + key for 2 seconds to turn the last assist level that was used.
on the headlight. To turn the headlight back
on, press and hold the + key again for 2 Assist Level Mode
seconds.
0 - No assist
Eco
1 - 40% of max power

2 - 52% of max power

Standard
3 - 64% of max power

4 - 81% of max power

Sport
5 - 100% of max power
B AT T E R Y L E V E L SETTINGS MODE
When the battery is full, the five-segment To enter Settings Mode first power on the
battery icon will be fully lit and the number Bird Bike, then long press and hold
of bars will decrease as the battery level keys +/- at the same time. Once in Settings
decreases. When the battery is low and Mode you adjust from mph to km/h, set a
needs charging, the battery icon will flash. speed limit, set wheel diameter, and adjust
the brightness of the display. 

While in Settings Mode, you can toggle up

and down with the up (+) and down
(-) buttons. Short press the power
button to adjust the ítem you want to
change, then short press the power button
after making your selection to save. 

To exit Settings Mode just long press the

- button for 2 seconds. Also, while in
Settings Mode if no operation is performed
for 30 seconds, then the display will return
back to normal.

21
E R R O R C O D E D I S P L AY
See table to the right for troubleshooting instructions for common error codes. If your error code is not
shown, contact Bird Bike support or your Bird Bike retailer.
Error Code Cause Solution

0x13 or 0x32 Full battery Regular function of the e-bike will not be interrupted. Discharge the battery
charge alert by riding the e-bike to clear error. If error 0x13 still appears after the battery
is less than 100%, contact customer support or your BirdBike retailer.
0x14 or 0x31 Low battery Regular function of the e-bike will not be interrupted. Charge the battery to
charge alert eliminate.
0x15 High vehicle Place vehicle in a cool environment. Wait until vehicle temperature is less
temperature than 45 degrees C. Error 0x15 will be cleared.

• Higher than 45 degrees C: error 0x15 triggered, but e-bike and battery
function are regular.
• Higher than 50 degrees C: error 0x15 triggered, electric assist will function,
cannot charge battery.
• Higher than 65 degrees C: error 0x15 triggered, electric assist will not
function, cannot charge battery.
0x16 Low vehicle Place vehicle in a temperate environment. Wait until vehicle temperature is
temperature greater than 5 degrees C. Error 0x16 will be cleared.

• Less than 5 degrees C: error 0x16 triggered, but e-bike and battery
function are regular.
• Less than 0 degrees C: error 0x16 triggered, electric assist will function,
cannot charge battery.
• Less than -20 degrees C: error 0x16 triggered, electric assist will not
function, cannot charge battery.

23
M PH & KM/H (P1) W H E E L D I A M E T E R ( P 3)
When P1 is displayed in the speed position When P3 is displayed in the speed position
while in Settings Mode, press the while in Settings Mode, the wheel diameter
+/- buttons to switch the display between setting will be shown in inches and can be
mph or km/h. After selecting, short press adjusted with the +/- buttons. Be sure
the power button to save. to know the proper sizes as selecting the
wrong size can result in unexpected speeds.
After selecting, press the power button
so save.

S PE E D LI M IT (P2)
When P2 is displayed in the speed position
while in Settings Mode and the speed limit
value is displayed in the trip position, you
can then adjust the speed limit with the
 +/- buttons. The minimum is 7 mph
(12km/h) and the maximum is 20mph
(32km/h). After selecting, short press the
 power button to save.
D I S P L AY B R I G H T N E S S ( P 4) A U T O M AT I C P O W E R O F F T I M E R ( P 5 )
When P4 is displayed in the speed position When P5 is displayed at the speed position while
while in Settings Mode, the display in Settings Mode, choose 0-9 by using the
brightness settings from 1 to 5 are displayed +/- buttons, which represents the
according to the current setting. 1 is the automatic shutdown time in minutes. The
lowest brightness setting, and 5 is the default setting to power off automatically after
highest (default setting is 5). 5 minutes and setting the timer to 0 means that
auto power off will be disabled. After selecting,
DA R K BRIGHT
short press the power button to save.

1 2 3 4 5

After the setting is completed, short press R E S E T TR I P M E TE R (P6)

the power button to save.
When P6 is displayed at the speed position while
in Settings Mode, press the +/- buttons to
select either Y or N. After selecting Y, short press
the power button to reset the trip meter to
0. After resetting the trip meter, short press the
power button to save the parameters.

25
SERVICE REMINDER:

After the Bird Bike has been ridden 300 miles

(500km), there will be a service inspection
reminder shown on the display the next time it’s
turned on. If the reminder isn’t marked as complete,
then it will be displayed every time the vehicle is
turned on. IMPORTANT: Please service the Bike at
the retailer of purchase every 300 miles (500km) to
extend its durability and keep you safe on the road.
The reminder can be cleared by a short press of the
power button.

To remove the service reminder completely until

the next 300 miles (500km), the rider must connect
to the Bird Bike through the Bird App and mark
the service inspection as complete. Once marked
complete in the Bird App, the service reminder will
then no longer be displayed by default each time the
Bird Bike is powered on.
Operation and Safety Instructions
• Recommended age: 16+ years old. • Components shall be maintained and repaired in
• It is recommended to always wear a helmet when riding. accordance with the manufacturer’s specifications and
• The right brake lever engages the rear brake and the left using only the manufacturer’s authorised replacement
brake lever engages the front brake. parts with installation performed by dealers or other
• Do not exceed the maximum load of 265 lbs (120.kg) skilled persons.
and no more than one rider at a time. • When performing adjustments and replacements of
• The maximum load of 265 lbs (120.kg) includes the rider, brakes, please seek professional help from a dealer or
as well as any other load that is added to front or rear racks. other skilled person.
• The Bird Bike is suitable to fit a bicycle trailer, provided that • Do not modify the bike as it will void your warranty and
the trailer manufacturer's guidelines such as attachment introduce potential safety issues. Read and understand all
method, loading, and speed are strictly adhered to. safety warnings listed on the product label.
• If gear shifting operations do not feel smooth, wash the • Risk of injury or death from loss of control, collisions, and
derailleur and lubricate all moving parts. For maximum falls. Helmets and other protective equipment are highly
performance we highly recommend Shimano lubricants recommended and may be required by law.
and maintenance products. If gear shifting adjustments • Comply with local laws and regulations when riding this
cannot be carried out, check that the rear fork ends are product. Do not ride where prohibited.
aligned. Also, check if the cable is lubricated and if the • Ensure the intended area of operation is safe. Do not
outer casing is not too long or short. ride in the snow, in the rain, or on roads which are wet,
• Before each use, conduct a basic safety inspection of the muddy, icy, or that are slippery for any reason. Do not ride
Bird Bike, including: over obstacles. Avoid sharp bumps, drainage grates, and
(i) trueness of the wheels & condition of tires; sudden surface changes.
(ii) safe operation of all brakes and lights; • There are increased braking distances in wet weather.
(iii) good condition of the frame; • Avoid streets and surfaces with water, sand, gravel, dirt,
(iv) sufficient battery charge power; and leaves, and other debris.
(v) any sign of damage, unusual or excessive wear, or other • The bike should not be used for racing, stunt riding, or
open and obvious mechanical problem/maintenance other maneuvers.
needs.

27
READ BEFORE RIDING

• Avoid contact with moving parts. Ensure hands, feet, hair, and components might react to wear or stress fatigue in
clothing, and other body parts stay clear of moving parts different ways. If the design life of a component has been
like the motor or front wheel. exceeded, it may suddenly fail, possibly causing injuries
• ALWAYS keep both hands on the handlebar when riding. to the rider. Any form of crack, scratches, or change of
• You should not ride the Bird Bike: colouring in highly stressed areas indicate that the life
• if under the influence of alcohol or drugs, of the component has been reached and it should be
• if you have a heart condition, are pregnant, have head, replaced.
back, or neck ailments which limit your ability to ride safely, • Certified and approved Child Safety Seats must be used
• if you have any mental or physical conditions that may when transporting a child passenger.
make you susceptible to injury or impair your physical • Children should not ride on the back of the bike without an
dexterity or mental capabilities to recognise, understand, appropriate certified and fitted Child Safety Seat.
and perform all of the safety instructions and to be able to • The weight of the EPAC + Rider + Child Safety Seat + Child
assume the hazards inherent with the Bird Bike. should not exceed the maximum load of 265 lbs (120 kg).
• DO NOT ride or attempt to charge a vehicle that has been • The child should not exceed the manufacturer’s maximum
submerged in water or if there is risk of water intrusion into recommended weight for the Child Safety Seat.
the battery compartment, even if the vehicle is no longer • Front mounted child seats should be mounted to the
wet. Contact Bird for further instructions. handlebar stem not the handlebar itself. Rear mounted
• To prevent electric shock when cleaning, remove the child seats should only mount to the provided rear dropout
charger plug from the outlet and wipe vehicle with a eyelets and the seat stay mounts.
dry cloth. Only use the charging cable provided by the • Use of certified and approved luggage racks is required
manufacturer. when carrying a load.
• Only store in dry areas. Never store in wet conditions. • The weight of the EPAC + Rider + Luggage Rack + Load
• Prolonged Exposure to UV Rays, Rain and the Elements should not exceed the maximum load of 265 lbs (120 kg).
May Damage the Enclosure Materials, Store Indoors When • Rear luggage rack carriers should only mount to the
Not in Use. rear dropout eyelets and the seat stay mounts. The rear
• WARNING: As with all mechanical components, the bicycle Luggage Rack load should not exceed a payload of 55 lbs
is subjected to wear and high stresses. Different materials (25kg).
• Front luggage rack carriers should only mount to the front
fork eyelets. The front luggage rack should not exceed a
payload of 22lbs (10kg).

Precautions for washing the Bird Bike:

• When washing the Bird Bike, do not directly pour water on
the motor and the front and rear axles to prevent water
from affecting the performance and life of the product.
When washing the Bird Bike, do not use a strong steam or
high-pressure water spray.
• After washing the vehicle or riding through water,
pay special attention to the working conditions of the
brakes.The braking capability may be reduced in these
circumstances.

Storage Instructions:
• WARNING: Remove the battery from the Bird Bike if not
being used for an extended period of time and store in a
dry, ventilated space.
• WARNING: Be sure to charge the battery at least every
3 months. The battery risks damage if not charged for
periods over 3 months.
• WARNING: Don’t leave the charger plugged into the
battery after it’s charged for extended periods of time as
this could result in permanent damage to the battery.

29
Maintenance and general troubleshooting
Inspection of handlebar and front & rear wheel Inspection of front and rear brakes
• Move the Bird Bike up, down, front, back, left and right to • Adjustment of the brake lever: Pinch the front and rear
check whether the handlebars and the axle nuts of the brake levers, and confirm whether the brakes are working
front and rear wheels are tightened properly, whether the when the distance between the brake lever and the
handlebars are tightened properly, and whether there is handlebar is 13mm.
any abnormal rubbing or damage happening between • Adjustment method of the front and rear brakes: The
parts. distance between the brake and the brake lever is
• Push the vehicle back and forth to check whether the specified to be between 10-20mm.
front and rear wheels rotate smoothly and without any • When the brake is in a tightly gripped state, the brake pad
abnormal noise or rubbing. and the brake disc should be contacting evenly.
• Carefully check the entire vehicle before riding and if you • The brake pads and brake discs should be replaced at the
find any issues, please contact a professional for repair or same time (the adjustment of the rear wheel brake is the
contact Bird support for help. same as that of the front wheel brake).

Inspection of power circuit and lighting circuit Battery installation status

• Turn on the power, operate the lighting switch, check • Confirm that the battery is in a fixed state, connected, and
whether the headlights and taillights are on, and if they are operating properly.
at normal levels.
• Check for any damage with the lighting system. Battery Pack Maintenance
• Check whether the power cables on the Bird Bike are • Do not store or charge the battery at temperatures
connected and are operating safely as intended as well as outside of the stated limits (see specifications). Do
whether all connectors are functioning properly. not puncture the battery. Refer to your local laws and
regulations regarding battery recycling and/or disposal.
• A well maintained battery can perform well even after The fixed state of the axle
many miles of riding. Charge the battery after each ride • Please confirm that the front and rear axles of the wheels
to avoid draining the battery completely. When used at are not shaking or loose.
room temperature (22°C [70°F]) the battery range and
performance is best. Inflation, wear, and damage of tires and rims
• Warning: Do not attempt to disassemble the battery. Risk • Please confirm whether the tire inflation is appropriate.
of fire. No user serviceable parts. Improper inflation can cause punctures and loosening of
• Warning: Do not ride when the ambient temperature is various parts of the Bird Bike. In addition, please determine
outside of the operation temperature (see specifications), whether there is a high amount of wear or any foregin
because low/high temperature will limit the maximum objects or nails in either of the tires. If so, do not ride before
power/torque. Doing so could cause personal injury or fixing the issue or repairing the tire(s).
property damage due to slips or falls. • Make sure the rims are clean and undamaged at the
tire bead and, if you have rim brakes, along the braking
Saddle adjustment surface. Riding a wheel that is at the end of its usable life
• To find the proper height of the bike saddle, sit on the can result in wheel failure, which can cause you to loose
saddle and ensure the toes of both feet are just touching control and fall.
the ground comfortably.
Adjustment of pedals and other moving parts
• The minimum saddle height is 89 cm for the A-Frame and
• The pedals should rotate smoothly. If either is loose, please
82.6 cm for the V-Frame. You can measure by using a tape
tighten it.
measure and measuring from the ground to the top of the
saddle when in it's lowest position.
Charge and discharge port

Damage or contamination of reflectors • Please make sure that the charging and discharging ports
are not damaged.
• Check whether the reflectors are dirty or damaged. If they
are, then clean or replace them. • Also make sure that no foreign objects have entered into
the ports, that the ports are not deformed, and that the
port covers are not damaged.
31
Main Components
Brakes:
Brake pads / calipers:
• Tektro MD-M300-F
• Tektro MD-M300-R

Brake levers:
• Tektro EL355F-RT
• Tektro EL350R-RS

Tyres:
• A-Frame: Kenda K-1216 700x45c 80 PSI MAX
• V-Frame: Kenda K-1216 26x1.75 60 PSI MAX

Motor:
• Bafang H400B
Power and Frequency Transmissions
Maximum radio-frequency Frequency Band (MHz)
power transmitted (dBm)

4.96 2400 to 2483.5

Bird Bike Distributor's Warranty

Please refer to your distributors' warranty for information on
any coverage for your Bird Bike in regards to any defects or
issues that are outside of normal wear and tear within the
warranty period. If you need any type of support or warranty
information for your Bird Bike, please contact the dealer or
retailer where you purchased the product.

33
EU Declaration of Conformity
Bird Rides Europe BV
Rokin 92, 1012 KZ
Amsterdam, The Netherlands

Product Type: Electric Power Assisted Bicycle

Commercial Name: Bird Bike
Model Name: V-Frame
Model No./Designation: VA00066/VA00071/VA00119 (Grey), VA00067/VA00072/VA00120 (White)

The undersigned declares that the products described herein is in conformity with the following EU harmonization legislation:

Machinery Directive 2006/42/EC

EMC Directive 2014/30/EU
Radio Equipment Directive 2014/53/EU

And that the equipment is in conformity with the following harmonized standards:

1. EN 15194:2017
2. EN 12100:2010
3. EN ISO 13849-1:2015
4. EN IEC 61000-6-1:2019
5. EN 61000-6-3:2007+A1:2011
6. EN 301 489-1 v2.2.3
7. EN 301 489-17 v3.2.4
8. EN 300 328 v2.2.2
9. EN 62479:2010
35