Installation Precautions

Before installation, check

1 2
whether thefunctions of the
vehicle are OK and whether
there are scratches in the
vehicle. If there is any
problem, pleasereport to the
customer in time.
Before disassembling
During the installation
the car, the installer process, pay attention to
should remove all metal the dismantled car
components to avoid
objects and other hard
scratching the instrument

3 4
objects carried on the panel, clean up the
lower body to prevent sundries left during
wiring in time, do not
damage to the car seat leave them in the car,
or interior during the and make sure to insulate
disassembly process. the wiring heads to
avoid short circuits.
The wiring should be reasonable, the

5 6
installation space in the car is relatively Do not plug or unplug the
limited, and the space occupied should be connected cables or
minimized to facilitate the installation of accessories while the
the host. The host connection line should power is on, so as not to
be well planned. Avoid affecting the damage the host or
moving parts of the car, such as the accessories by hot
steering wheel shaft, accelerator and brake plugging
pedals, and other vehicle control parts
when routing. After the wire harness is
finished, it needs to be fixed to prevent it
from falling off.
 2017-21 Audi A4L Ambient Lights
Original car 1:1 mold 25 lights
(screen control/steering wheel control/WeChat applet control/APP control)
Product configuration

Door outline light bar X4

Footwell lamp X4
Door storage box light X4
Saddle Light Bar X2 Four-door profile light bar
control box
Cup light X2 Central control light bar

Handle light X4
Four-door surface light X4 Four-door surface light bar
Central control light bar x1
water glass lamp

door power
cord
Main car power
cord
Extension cord
storage box footwell lamp Spare handle OBD adapter Adapter cable
handle light light light cable
Abnormal elimination method of ambient light:
1. The ambient light cannot be controlled or the ambient light is not on
Answer: The control dial of the main control box has not been dialed (the dial code on
the upper cover of the box defines the redial code), and whether the power transfer is
normal.
2. The color of the central control is not synchronized with the color of the four
doors
Answer: The lights coming out of the control box are disconnected first, leaving
only one light to debug the red, green and blue of the ambient light (to exclude the
problem of poor contact between the lamp head of the ambient light)
3. The color of the door panel atmosphere light is not synchronized
Answer: The door panel ambient light leaves any light, and the red,
green and blue ambient lights are debugged (excluding the problem of
poor contact of the door panel ambient light lamp head)
4. Whe nthe main control box is on and the four doors are not on
Answer: Check the power supply of the door panel, connect the mobile
phone to the ambient light, and click about to enter the match
 Installation Notes
1. Remove the passenger storage box, connect the CAN plug of the power cable with the
12P small plug in the large plug of the main power cable of the original car, the red wire
is connected to the original car insurance (ACC or B+), and the black wire is grounded.
2. Control box accessories use
(1). Power cord: installed in the car, power supply and control of the control box
(2). Left front and rear extension cable: installed on the left side of the car, one end is
inserted into the control box, and the other two ends are passed from the left side of the
car across the bridge to the left front and rear door panels
(3). Right front and rear extension cable: installed on the right side of the car, one end is
inserted into the control box, and the other two ends are passed from the right side of
the car across the bridge to the right front and rear door panels
(4). The door transfer wire (light head transfer wire T), which is installed in one door of the
car door, one end is plugged into the extension wire that passes through the car, and the
other two ends are plugged into the light head
(5) .1m extension cable: 2.5-meter lamp adapter for extension: for adapter adapter
(6). T-shaped light guide sheet: installed in the door panel storage box
(7). Rectangular footwell lamp: installed on the decorative plate below the main driver
and the passenger
Power cord transfer diagram (above the passenger storage box)

The CAN cable is transferred to the 12P small

plastic shell in the CD large plug
 Power cord transfer diagram
(above the passenger storage box)
Ambient light installation location

中
控
Central control light bar
灯
条
水杯灯 脚
脚 water glass lamp
窝
窝 马鞍灯条 灯
灯 Saddle Light Bar
footwell lamp
footwell lamp
Door panel ambient light location

拉 轮
表
手 廓
面
灯 灯
灯 contour light
surface light handle light
储
物
盒
灯
storage box light
Door Adapter Plug Instructions

The door power cord is

transferred to the original
car 20P plug
Door Adapter Plug Instructions

First, pick out the 18P small plug

of the original car and insert it
into the black plastic shell
Door surface light installation

原车
灯头
导光
条拆
下，
装上
专用 Remove the light guide strip
导光 of the original lamp head
and install the special
条 light guide strip
 Door outline light installation

When installing the door profile light strip,

cut these plastic solder joints first
Gear saddle light installation

马
鞍
导
光
条
安
装
位
置 Saddle light guide
installation position
Door storage box light installation

Door storage light installation

position, need to open the hole
2017-19 Screen Controls

个
性
化
进
入 Personalized entry
2017-19 Screen Controls

front row mode

个
性 color zone
化

Color zone adjustment

2020 and above screen controls

个
性
化
进
入
Personalized entry
2020 and above screen controls

Debug mood light color and brightness

 2020 and above screen controls

The last white of the contour light is the pattern

 Steering wheel button controls

Long press the voice key

to wake up the
Left button adjustment mode: Right-click adjustment mode adjustment (the
breathing, flash, multi-color atmosphere light flashes
breathing, gradient, rhythm, off once) and let go
Long press the voice key
to exit the adjustment
(the atmosphere light
flashes twice)

color adjustment
renderings
renderings
renderings
renderings