ShenZhen Hi-Link Electronic co.

,Ltd

20W Series of Ultra-compact Power Module

20M03/20M05/20M09/20M12/20M15/20M24

Version：V1.0 Date：2019/10/9 Copyright @ Shenzhen Hi-Link Electronic CO.,LTD

 CONTENT

1. Mini-ultra Power Supply Module...................................................................................................................... 1

2. Product Model.........................................................................................................................................................1

3. Product Characteristic...................................................................................................................................... 1

4. Environment Condition........................................................................................................................................ 2

5. Electric Characteristics.................................................................................................................................. 2

5.1. Input Characteristic.............................................................................................................................. 2

5.2. Output Characteristic (3.3V/6100mA).............................................................................................. 3

5.3. Output Characteristic (5V/4000mA).................................................................................................. 4

5.4. Output Characteristic (9V/2200mA).................................................................................................. 5

5.5. Output Characteristic (12V/1600mA)................................................................................................ 6

5.6. Output Characteristic (15V/1300mA)................................................................................................ 7

5.7. Output Characteristic (24V/830mA).................................................8

6. Input Voltage and Load Characteristic .................................................................................................... 10

7. Working Enviroment Temprature and Load Characteristic .................................................................... 10

8. Typical application circult.......................................................................................................................... 11

Input Parts.........................................................................................................................................................12

Output Parts.......................................................................................................................................................12

9. Safety Characteristic...................................................................................................................................... 12

9.1. Certification.......................................................................................................................................... 13

9.2. Safety and electromagnetic compatibility:.................................................................................. 13

9.3. Temperature rise safety design:...................................................................................................... 13

10. Marking、Packing、Transportation、Storage............................................................................................ 13

10.1. Marking.....................................................................................................................................................13

10.1.1. Product Marking........................................................................................................................ 13

10.1.2. Packing Marking........................................................................................................................ 13

10.2. Packing.....................................................................................................................................................13

10.3. Transportation...................................................................................................................................... 13

10.4. Storage.....................................................................................................................................................13

11. Dimension and Weight...................................................................................................................................... 14

1. Mini-ultra Power Supply Module
The 20 W ultra-small series power supply module is a small volume, high efficiency power module
for customers designed by Hi-Link. It has the advantage of global input voltage range, low
temperature rise, low power consumption, high efficiency, high reliability, high security isolation etc.
and has been widely used in smart home, automation control, communication equipment,
instruments and other industries.

2. Product Model
Output Output Output
Dimension
Model power Voltage Current Notes
(mm)
(W) (V) (mA)

HLK-20M03 20 3.3 6100

HLK-20M05 20 5 4000

HLK-20M09 20 9 2200
56*32*22.5
HLK-20M12 20 12 1600

HLK-20M15 20 15 1300

HLK-20M24 20 24 830

3. Product Characteristic
1. Ultra thin、ultra small、minimum volume in the industry
2. Universal input voltage（90~265Vac）
3. Low power consumption、environmental protection 、no-load loss<0.1W
4. Low ripple and low noise
5. Good output short circuit, over-current protection and self-recovery
6. High efficiency and high power density
7. Input-output isolated voltage-proof 3000Vac
8. 100% full load aging and testing
9. High reliability, long life design, continuous working time more than 100000 hours
10. Meet UL、CE requirements; product design meets EMC and safety test requirements

第 1 页 / 共 8 页
 11. Adopt high quality environmental protection waterproof heat conduction glue to fill seal,
moisture-proof, anti-vibration, meet the IP65 standard of waterproof and dust proof
12. Economic solution, cost-effective
13. Working without an external circuit
14. 1 year warranty

4. Environment Condition

Project Name Technical Critical Unit Note

Working temperature -25—+60 ℃

Storage temperature -40—+80 ℃

Relative humidity 5—95 %

Heat dissipation mode natural cooling

Atmospheric pressure 80—106 Kpa

Sea level elevation ≤2000 m

Meet the
Vibration coefficient:
requirements of
Vibrate 10~500Hz,2G10min./1cycle,
secondary road
60min.each along X,Y,Z axes
transportation

5. Electrical Characteristics

5.1. Input characteristic

Project Name Technical Critical Unit Note

Rated input voltage 100-240 Vac

Input voltage range 85-264 Vac Or 70-350Vdc

Maximum input current ≤0.6 A

Input surge current ≤34 A

第 2 页 / 共 8 页
 Input low start ≤50 mS

Long-term reliability MTBF≥100，000 h

External fuse
2A/250Vac Slow fuse
recommendation
Note：test at room temperature

5.2. Output Characteristic (3.3V/6000mA)

Project Name Technical Critical Unit Note

No-load rated
3.3±0.1 Vdc
output voltage

Full-load rated
3.3±0.2 Vdc
output voltage

Short time

maximum output ≥6100 mA

current

Rated output
6000 mA
current

Voltage regulation ±0.2 %

Load regulation ±0.5 %

Input low voltage

Vin=115Vac，output full-load≥75 %
efficiency

Input high voltage

Vin=230Vac，output full-load≥76 %
efficiency

≤100

Output ripple and Rated input voltage，full output load。Using

noise 20MHz bandwidth oscilloscope， mV

(mVp-p) Load side and 10uF and 0.1uF capacitors are

tested.

Turn on or turn off

（rated input voltage, output plus
overshoot %VO
10% load） ≤5
amplitude

第 3 页 / 共 8 页
Output

over-current 150-200% of output maximum load A

protection

No
Direct short circuit in normal output and
Output short damage to
automatic return to normal operation after
circuit protection the whole
removal of short circuit
machine

5.3. Output Characteristic (5V/4000mA)

Project Name Technical Critical Unit Note

No-load rated
5.0±0.1 Vdc
output voltage

Full-load rated
5.0±0.2 Vdc
output voltage

Short time

maximum output ≥4200 mA

current

Rated output
4000 mA
current

Voltage regulation ±0.2 V

Load regulation ±0.5 %

Input low voltage

Vin=115Vac，output full-load≥80 %
efficiency

Input high voltage

Vin=230Vac，output full-load≥82 %
efficiency

≤100

Output ripple and Rated input voltage，full output load。Using

noise 20MHz bandwidth oscilloscope， mV

(mVp-p) Load side and 10uF and 0.1uF capacitors are

tested.

第 4 页 / 共 8 页
Turn on or turn off
（rated input voltage, output plus 10% load）≤
overshoot %VO
5
amplitude

Output

over-current 150-200% of output maximum load A

protection

No
Direct short circuit in normal output and
Output short damage to
automatic return to normal operation after
circuit protection the whole
removal of short circuit
machine

5.4. Output Characteristic (9V/2200mA)

Project Name Technical Critical Unit Note

No-load rated
9.0±0.1 Vdc
output voltage

Full-load rated
9.0±0.2 Vdc
output voltage

Short time

maximum output ≥2300 mA

current

Long time maximum

2200 mA
output current

Voltage regulation ±0.2 %

Load regulation ±0.5 %

Input low voltage

Vin=115Vac，output full-load≥80 %
efficiency

Input high voltage

Vin=230Vac，output full-load≥82 %
efficiency

第 5 页 / 共 8 页
 ≤150

Output ripple and Rated input voltage，full output load。Using

noise 20MHz bandwidth oscilloscope， mV

(mVp-p) Load side and 10uF and 0.1uF capacitors are

tested.

Turn on or turn off

（rated input voltage, output plus 10% load）
machine overshoot %VO
≤5
amplitude

Output over-current
110-150% of output maximum load A
protection

No
Direct short circuit in normal output and
Output short circuit damage to
automatic return to normal operation after
protection the whole
removal of short circuit
machine

5.5. Output Characteristic (12V/1600mA)

Project Name Technical Critical Unit Note

No-load rated
12.0±0.1 Vdc
output voltage

Full-load rated
12.0±0.2 Vdc
output voltage

Short time

maximum output ≥1700 mA

current

Long time

maximum output 1600 mA

current

Voltage regulation ±0.2 % 11.76-12.24V

Load regulation ±0.5 %

Input low voltage

Vin=115Vac，output full-load≥82 %
efficiency

第 6 页 / 共 8 页
Input high voltage
Vin=230Vac，output full-load≥84 %
efficiency

≤150

Output ripple and Rated input voltage，full output load。Using

noise 20MHz bandwidth oscilloscope， mV

(mVp-p) Load side and 10uF and 0.1uF capacitors are

tested.

Turn on or turn off

（rated input voltage, output plus 10% load）
overshoot %VO
≤5
amplitude

Output

over-current 110-150% of output maximum load A

protection

No
Direct short circuit in normal output and
Output short damage to
automatic return to normal operation after
circuit protection the whole
removal of short circuit
machine

5.6. Output Characteristic (15V/1300mA)

Project Name Technical Critical Unit Note

No-load rated
15.0±0.1 Vdc
output voltage

Full-load rated
15.0±0.2 Vdc
output voltage

Short time

maximum output ≤1400 mA

current

Rated output
1300 mA
current

Voltage regulation ±0.2 %

第 7 页 / 共 8 页
 Load regulation ±0.5 %

Input low voltage

Vin=115Vac，output full-load≥82 %
efficiency

Input high voltage

Vin=230Vac，output full-load≥84 %
efficiency

≤150

Output ripple and Rated input voltage，full output load。Using

noise 20MHz bandwidth oscilloscope， mV

(mVp-p) Load side and 10uF and 0.1uF capacitors are

tested.

Turn on or turn off

（rated input voltage, output plus 10% load）
overshoot %VO
≤5
amplitude

Output

over-current 110-150% of output maximum load A

protection

No
Direct short circuit in normal output and
Output short damage to
automatic return to normal operation after
circuit protection the whole
removal of short circuit
machine

5.7. Output Characteristic (24V/830mA)

Project Name Technical Critical Unit Note

No-load rated
24.0±0.1 Vdc
output voltage

Full-load rated
24.0±0.2 Vdc
output voltage

Short time
≥900 mA
maximum output

第 8 页 / 共 8 页
 current

Rated output
830 mA
current

Voltage regulation ±0.2 %

Load regulation ±0.5 %

Input low voltage

Vin=115Vac，output full-load≥84 %
efficiency

Input high voltage

Vin=230Vac，output full-load≥85 %
efficiency

≤220

Output ripple and Rated input voltage，full output load。Using

noise 20MHz bandwidth oscilloscope， mV

(mVp-p) Load side and 10uF and 0.1uF capacitors are

tested.

Turn on or turn off

（rated input voltage, output plus 10% load）
overshoot %VO
≤5
amplitude

Output

over-current 110-150% of output maximum load A

protection

No
Direct short circuit in normal output and
Output short damage to
automatic return to normal operation after
circuit protection the whole
removal of short circuit
machine

第 9 页 / 共 8 页
6. Input Voltage and load characteristic

Input voltage and load characteristic curve

7. Working environment temperature and load characteristic

Working environment temperature and load characteristic curve

第 10 页 / 共 8
8. Typical application circuit

Input part

Function Recommended value

Recommended device

Protect the circuit from damage

F1/Fuse 2A/250Vac，slow fuses
when the module is abnormal

The cumulative surge is to

MOV1/Varistor protect 10D561K

the module from damage

Filtering, Security Protection

C1/Safety capacitance 0.22uF/275Vac
(EMC certification)

Inductive value 10-30mH,Test

L1/Common mode
EMI filter Requirements:1KHZ/0.3V,
inductance
current 300-700mA

Safety capacitance Common-mode inductance

Note：
 Fuse and varistor are basic protective circuits.
 If you need to pass the authentication, the Anchorage capacitance and common-mode
inductance must not be omitted.

第 11 页 / 共 8 页
Output Part
Component bit

number /
Function Recommended value
recommended device

Aluminium electrolytic
Filter, output ripple can be
capacitance, capacity 100-220
C2/filter capacitor controlled in 30mV after adding
UF, voltage reduction greater
this capacitor
than 75%

RL/load load

Note: C2 filter capacitor can reduce the output ripple from the original 50mV to the 30mV.

9. Safety Characteristic

9.1. Certification

Product design complies with UL,CE safety certification requirements. (UL,CE certification is

done by customers themselves.)

9.2. Safety and electromagnetic compatibility:

 The input design adopts UL certification 1A insurance;
 The PCB board is made of double-sided copper clad foil, and the material fire resistance
gradeis94-V0grade；
 SafetystandardscomplywithUL1012,EN60950,UL60950
 Insulation voltage： I/P-O/P:2500Vac
 Insulation resistance： I/P-O/P>100MOhms/500Vdc25℃ 70%RH
 Conduction and radiation conformance toEN55011,EN55022(CISPR22)
 Electrostatic discharge:IEC/EN61000-4-2level48kV/15kV
 Radio frequency radiation immunity： IEC/EN61000-4-3

第 12 页 / 共 8
 9.3. Temperature rise safety design:
The maximum temperature rise of the internal surface of the power supply capacitor and the
main converter is not more than 90 ℃ at room temperature, and the maximum temperature rise
of theshellsurfaceisnotmorethan60 ℃.

10. Marking, packing, transportation, storage

10.1. Marking

10.1.1. Product mark

A unique bar code label is affixed to ensure the trace ability of information
such as the production date and batch of each piece of product. Its content conforms to the
national standard, the industry standard stipulation

10.1.2. Packing mark

The packing boxes are marked with the name of the manufacturer, site, zip code, product model,
factory year, month, day;
Marked "up", "moisture-proof", "careful light" and other transport signs, all signs are in accordance
with the GB 191 requirements.

10.2. Packing
The product uses the special absorption plastic box to separate the packing, has the vibration proof
function,andconformstotheGB3873stipulation.

10.3. Transportation
The packaged products can be transported by any means of transportation, should be covered in
the transportation,should not be violent vibration,impact,etc.

10.4. Storage

Products shall be stored in accordance with GB3873.

第 13 页 / 共 8
11. Weight and Dimensions

引脚功能

1 AC

2 AC

3 -V0

4 +V0

重量：40±2g

Size Error:
1, length, width, height and pin
spacing error ±8%
2, pin length error ±1mm
3, pin diameter error-0.2mm

第 14 页 / 共 8