Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 7 views

    F5 Device Network Troubleshooting CLI Commands 1664594843

    Uploaded by

    himansupanda625

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    F5 Device Network Troubleshooting CLI Commands 1664594843

    Uploaded by

    himansupanda625
    7 views2 pages

    Original Title

    F5_Device_Network_Troubleshooting_CLI_Commands_1664594843

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    7 views2 pages

    F5 Device Network Troubleshooting CLI Commands 1664594843

    Uploaded by

    himansupanda625

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    F5 Device Troubleshooting CLI Commands

    Network

    Commands Explanation
    #tmsh list sys management-ip Shows system management IP
    address
    Root# netstat –nr/-r Route table of F5 with default
    gateway
    # tmsh list net self-allow Port lockdown - the default
    supported protocols and services
    #nslookup www.stonegreyband.com check system is able to resolve
    # dig www.stonegreyband.com names
    (tmos.net)#show interface <interface_key> Display the current status of a
    # tmsh show net interface specific interface
    (tmos.net)#show interface Display the current status of all
    interfaces.
    config # tmsh list net interface media-active vendor SFP device serial number
    serial
    config # tmsh list net interface all-properties All interface details
    (tmos)# list net interface media-capabilities Display the valid media types for a
    specific interface. 100TX-
    HD,1000T-FD
    Config# ifconfig eth0 Interface eth0 details
    Config# ping --help Ping command options
    (tmos)# ping -I 192.168.1.245 192.168.1.246 PING 192.168.1.246
    (192.168.1.246) from
    192.168.1.245 : 56(84) bytes of
    data
    Config# telnet 10.2.0.11 80 Command to server for port 80
    Get / http/1.1 service confirmation
    Config# curl http://10.2.0.11 Html content from server
    TCPDUMP
    tcpdump -ni /<partition_name>/<vlan_name> when you run tcpdump on a
    VLAN that resides in a non-
    default partition, you must specify
    the path to the VLAN object in
    the tcpdump syntax
    tmsh show /sys hardware |grep–ipva To determine whether your
    platform contains a PVA chip
    mergecap -a file1 file2 file3 file4 -w combined_file After all tcpdump processes are
    completed, combine them into a
    single file
    tcpdump -ni<interface_number> tcpdump on a hardware switch
    interface, it is rate-limited to 200
    packets per second
    tcpdump -ni 0.0 captures traffic from all VLANs in
    all route domains when you invoke
    it from the default route domain
    tcpdump –i /common/internal –c 30 30 packets capture on internal
    VLAN
    tcpdump –i internal / 1.2 / eth0 by default it captures starting/firs
    t96 bytes of a packet
    tcpdump –i internal –s0 not restricting packet size for
    capture, will capture full packet
    tcpdump –i internal –nn -nn means no name resolution in
    capture output
    tcpdump –i 0.0 –w /var/tmp/New-TCPDMP.pcap capture all interface traffic and
    write it to a file a given location
    tcpdump –i 0.0 –s0 arp –nn will capture ARP protocol packets
    only
    tcpdump –i 0.0:p host 192.168.1.101 –nn :p peer side when SNAT is used
    we want to see server side
    communication of the same host
    with NAT address as well
    tcpdump –i 0.0:p host 192.168.1.101 –nn and not tcp exclude tcp port 443 packet
    port 443 communication, and net
    172.16.1.0/24 IP in the network
    172.16.1.0/24

    You might also like