CRYLCOAT® 2630-2

Technical Datasheet

General Description
CRYLCOAT® 2630-2 is a TMA free, carboxyl functional polyester resin for use with Primid® XL-552 in the production of powder coatings. Formulations based
on CRYLCOAT® 2630-2 exhibit improved color stability in direct fire gas ovens, excellent flow and mechanical properties, no pinholing in thicker films and are
blooming free.

Saturated Polyester Resin

Product Specification Extrusion & Application Conditions

Limits Extrusion
Extruder Twin screw
Appearance Pale granules
Speed 250 rpm
Brookfield Viscosity @ 200 °C, mPa.s 2800-4100 Torque 75 ± 5 %
Color, b-value Max. 15 Temperature 95 to 105 °C
Acid value (mg KOH/g) 30-36 Application
60 micrometer film on steel/chromated
x Application
Al panel
Other Properties
Spray Gun Output voltage: 60 kV
Typical value Curing 10 min @ 180° C metal temperature
x
Glass transition (°C) Approx. 62
Film Properties
x
Starting Formulation Test Result
Gloss @ 60° (%) 93
Component Weight (%)
Direct/reverse impact on steel (kg. cm or in. lbs.) 160/160
CRYLCOAT® 2630-2 65.2
Direct/reverse impact on Al (kg. cm or in. lbs.) 80/80
Primid® XL 552 3.4
x
Titanium dioxide 30.0
Shelf Life
MODAFLOW® Powder 6000 1.0
Under normal storage conditions (≤30°C), the shelf life of the resin will
Benzoin 0.4 be 24 months from date of manufacturing. For product older than 24
months, it is recommended to check the acid value and the viscosity
every year.
x
Safety & Environmental Protection
For more information, please refer to the Material Safety Data Sheet.

July 2020 – Supersedes previous versions

2.2 / 03.07.2020 (replaces all previous versions) Worldwide Contact Info: www.allnex.com Page 1/1
Disclaimer: allnex Group companies ('allnex') exclude all liability with respect to the use made by anyone of the information contained herein. The information contained herein represents allnex's best
knowledge but does not constitute any express or implied guarantee or warranty as to the accuracy, the completeness or relevance of the data set out herein. Nothing contained herein shall be construed as
conferring any license or right under any patent or other intellectual property rights of allnex or of any third party. The information relating to the products is given for information purposes only. No guarantee
or warranty is provided that the product and/or information is suitable for any specific use, performance or result. Any unauthorized use of the product or information may infringe the intellectual property
rights of allnex, including its patent rights. The user should perform his/her own tests to determine the suitability for a particular purpose. The final choice of use of a product and/or information as well as the
investigation of any possible violation of intellectual property rights or misappropriation of trade secrets of allnex and/or third parties remain the sole responsibility of the user.
Notice: Trademarks indicated with ® , TM or * as well as the allnex name and logo are registered, unregistered or pending trademarks of Allnex Netherlands B.V. or its directly or indirectly affiliated allnex Group
companies. ©2020 allnex Group. All Rights Reserved.