Cluster –I: Common with B.

Tech in (a) Mechanical Engineering, (b) Aeronautical Engineering (c) Automobile Engineering (d) Civil
Engineering (e) Mechatronics Engg. (f) Textile Engineering (g) Chemical Engg.
Bachelor of Technology in Mechatronics Engineering(Credit Based)
KURUKSHETRA UNIVERSITY, KURUKSHETRA
Scheme of Studies/Examination
Semester I (w.e.f. session 2018-2019)
ExaminationSchedule(Marks) Duration
CourseNo./ Hours/ of
S.No. Subject L:T:P Credits Major
Code Week MinorTest Practical Total exam(Ho
Test urs)
1A BS-119A IntroductiontoElectromagneticTheory 3:1:0 4 4 75 25 0 100 3
1B BS-101A Chemistry 3:1:0 4 4 75 25 0 100 3
2A ES-105A ProgrammingforProblemSolving 3:0:0 3 3 75 25 0 100 3
2B HM-101A English 2:0:0 2 2 75 25 0 100 3
3 BS-135A Multi-variableCalculus&LinearAlgebra 3:1:0 4 4 75 25 0 100 3
4A ES-109A EngineeringGraphics&Design 1:2:0 3 3 75 25 0 100 3
4B ES-111LA ManufacturingProcessesWorkshop 0:0:3 3 1.5 - 40 60 100 3
5A BS-141A Biology 2:1:0 3 3 75 25 0 100 3
5B ES-101A BasicElectricalEngineering 4:1:0 5 5 75 25 0 100 3
6A BS-121LA ElectromagneticsLab 0:0:3 3 1.5 -- 20 30 50 3
6B BS-103LA ChemistryLab 0:0:3 3 1.5 -- 20 30 50 3
7A ES-107LA ProgrammingforProblemSolvingLab 0:0:2 2 1 -- 20 30 50 3
7B ES-103LA BasicElectricalEngineeringLab 0:0:2 2 1 -- 20 30 50 3
8A ES-113LA EngineeringGraphics&DesignPractice 0:0:3 3 1.5 -- 20 30 50 3
8B HM-103LA LanguageLab 0:0:2 2 1 -- 20 30 50 3
Total 12:5:8/ 25/25 21.0/ 375/ 185/ 90/1 650A/
12:3:10 20.0 300 200 50 650B

Note: A branch will study either the subjects corresponding to Sr. No. Marked A or corresponding to Sr. No. marked B in one particular
semester. Induction Program (Three weeks duration) is a part of scheme of first year in 1st semester for all branches.
Cluster –I: Common with B.Tech in (a) Mechanical Engineering, (b) Aeronautical Engineering (c) Automobile Engineering (d) Civil
Engineering (e) Mechatronics Engg. (f) Textile Engineering (g) Chemical Engg.

Bachelor of TechnologyMechatronics Engineering(Credit Based)

KURUKSHETRA UNIVERSITY, KURUKSHETRA
Scheme of Studies/Examination
Semester II (w.e.f. session 2018-2019)
ExaminationSchedule(Marks) Duration
CourseNo./ Hours/ of
S.No. Subject L:T:P Credits Major
Code Week MinorTest Practical Total exam(Ho
Test urs)
1A BS-119A IntroductiontoElectromagnetictheory 3:1:0 4 4 75 25 0 100 3
1B BS-101A Chemistry 3:1:0 4 4 75 25 0 100 3
2A ES-105A ProgrammingforProblemSolving 3:0:0 3 3 75 25 0 100 3
2B HM-101A English 2:0:0 2 2 75 25 0 100 3
3 BS-136A Calculus&OrdinaryDifferentialEquations 3:1:0 4 4 75 25 0 100 3
4A ES-109A EngineeringGraphics&Design 1:2:0 3 3 75 25 0 100 3
4B ES-111LA ManufacturingProcessesWorkshop 0:0:3 3 1.5 - 40 60 100 3
5A BS-141A Biology 2:1:0 3 3 75 25 0 100 3
5B ES-101A BasicElectricalEngineering 4:1:0 5 5 75 25 0 100 3
6A BS-121LA ElectromagneticsLab 0:0:3 3 1.5 -- 20 30 50 3
6B BS-103LA ChemistryLab 0:0:3 3 1.5 -- 20 30 50 3
7A ES-107LA ProgrammingforProblemSolvingLab 0:0:2 2 1 -- 20 30 50 3
7B ES-103LA BasicElectricalEngineeringLab 0:0:2 2 1 -- 20 30 50 3
8A ES-113LA EngineeringGraphics&DesignPractice 0:0:3 3 1.5 -- 20 30 50 3
8B HM-103LA Language Lab 0:0:2 2 1 -- 20 30 50 3
Total 12:5:8/1 25/ 21.0/ 375/ 185/200 90/150 650A/
2:3:10 25 20.0 300 650B

Note: A branch will study either the subjects corresponding to Sr. No. Marked A or corresponding to Sr. No. marked B in one particular semester.
 BS-119A Introduction to Electromagnetic Theory
L T P Credit Major Minor Total Time
Test Test
3 1 - 4 75 25 100 3h
Purpose To introduce the fundamentals of electromagnetic theory to the students for
applications in Engineering field.
Course Outcomes
CO 1 Introduce the basic concepts of Electrostatics in vacuum.
CO 2 Introduce the basic concepts of Magnetostatics in vacuum.
CO 3 Discuss electrostatics and magnetostatics in linear dielectric medium.
CO 4 Basics of Maxwell’s equations and electromagnetic waves.

Unit - I
Electrostatics in Vacuum: Calculation of Electric Field: Coulomb’s law, Continuous charge
distribution; Divergence and Curl of Electrostatic Fields: Field lines, flux, Gauss’s law, Applications of
Gauss’s law; Electrostatic Potential: Comments on potential, Poisson’s and Laplace’s Equation, the
potential of a localized charge distribution; Electrostatic Boundary Conditions; Work and Energy in
Electrostatics: the work done to move a charge, the energy of a point and continuous charge
distribution.
Unit - II
Electrostatics in a Linear Dielectric Medium: Polarization:dielectrics, induced dipoles, alignments
of polar molecules; The field of a Polarized Object: bound charges and its physical interpretation; The
Filed Inside a Dielectric; The Electric Displacement: Gauss’s law in the presence of dielectrics, A
deceptive parallel, Boundary conditions; Linear Dielectrics: Susceptibility, Permittivity, dielectric
constant, Boundary value problems with linear dielectrics, Energy in dielectric systems, Forces in
dielectrics.
Unit - III
Magnetostatics: The Lorentz Force Law: magnetic fields, magnetic forces, currents; Biot- Savart law,
Divergence and Curl of magnetic field, Magnetic Vector Potential: vector potential, magnetostatic
boundary conditions, multiple expansion of vector potential.
Magnetostatics in a linear magnetic: Magnetization: Effect of magnetic field on atomic orbits; The
Field of a Magnetized Object: Bound currents, Physical interpretation of bound currents; The
Auxiliary Magnetic Field: Ampere’s law in magnetized materials, A deceptive parallel, Boundary
conditions; Linear and Nonlinear Media: magnetic susceptibility and permeability, ferromagnetism.

Unit - IV
Faraday’s law: Electromotive Force: Ohm’s law, Motional emf; Electromagnetic Induction: Faraday’s
law, The induced electric field, inductance, energy in magnetic fields.
Maxwell’s Equations: Electrodynamics before Maxwell, How Maxwell fixed Ampere’s law, Maxwell’s
equations, Maxwell’s equations in matter.
Electromagnetic Waves: Electromagnetic Waves in Vacuum: the wave equation for electric and
magnetic field; Electromagnetic Waves in Matter: propagation in linear media.

Suggested Books:
1. David J. Griffiths, Introduction to Electrodynamics, Pearson Education.
2. Halliday and Resnick, Physics
3. W. Saslow, Electricity, Magnetism and Light

Note: The paper setter will set the paper as per the question paper templates provided.

Page | 3
 BS-121LA Electromagnetics Lab
L T P Credit Practical Minor Total Time
Test
- - 3 1.5 30 20 50 3h
Purpose To give the practical knowledge of handling the instruments.
Course Outcomes
CO To make the students familiar with the experiments related with Electromagnetic
Theory.

Note: Student will be required to perform at least 10 experiments out of the following list.

1. To study the variation of magnetic field with distance and to find the radius of coil by
Stewart and Gee’s apparatus.
2. To study induced e.m.f. as a function of velocity of magnet.
3. To study the growth and decay of current in a LR circuit using magnetic core inductor.
4. To find the coefficient of self-inductance by Rayleigh’s method.
5. To find the coefficient of mutual inductance of two coils.
6. To determine the magnetic induction field between the pole pieces of an electromagnet.
7. To study Bio-Savart’s law.
8. To study the dependency of magnetic field on coil diameter and number of turns.
9. To investigate the equipotential liens of electric fields.
10. To draw the equipotential lines of bar electrode.
11. To draw the equipotential lines for ring electrode.
12. Verification of Farady and Lenz’s law of induction by measuring the induced voltage as
function of time.
13. Measurement of induced voltage impulse as a function of the velocity of magnet.
14. To determine the dielectric constant of different dielectric materials.
15. To measure the spatial distribution of the magnetic field between a pair of identical coils
in Helmholtz arrangement.
16. To investigate the spacing between coils at which magnetic field is uniform and to
measure its spatial distribution.

Suggested Books:
1. C.L.Arora, B. Sc. Practical Physics, S. Chand.
2. B.L. Worshnop and H, T, Flint, Advanced Practical Physics, KPH.
3. S.L. Gupta & V. Kumar, Practical Physics, PragatiPrakashan.

Page | 4
 BS-101A Chemistry
L T P Credit Major Minor Total Time
Test Test
3 1 - 4 75 25 100 3h
Purpose To familiarize the students with basic and applied concept in chemistry
CO1 An insight into the atomic and molecular structure
CO2 Analytical techniques used in identification of molecules
CO3 To understand Periodic properties
CO4 To understand the spatial arrangement of molecules
UNIT - I
Atomic and molecular structure (10 lectures)
Molecular orbitals of diatomic molecules (N2, O2, CO) Equations for atomic and molecular orbitals.
Energy level diagrams of diatomics. Pi-molecular orbitals of butadiene and benzene and aromaticity.
Crystal field theory and energy level diagrams of [Co(NH3)6], [Ni(CO)4], [PtCl2(NH3)2] and magnetic
properties of metal complexes. Band structure of solids and the role of doping on band structures.
UNIT - II
Spectroscopic techniques and applications (8 lectures)
Principles of spectroscopy and selection rules. Electronic spectroscopy(basic concept). Fluorescence
and its applications in medicine.Vibrational and rotational spectroscopy of diatomic
molecules.Applications.Basic concepts of Nuclear magnetic resonance and magnetic resonance
imaging, Diffraction and scattering.
UNIT - III
Use of free energy in chemical equilibria (4 lectures)
Thermodynamic functions: energy, entropy and free energy. Estimations of entropy and free
energies.Free energy and emf.Cell potentials, the Nernst equation and applications.
Periodic properties (4 Lectures)
Effective nuclear charge, penetration of orbitals, variations of s, p, d and f orbital energies of atoms in
the periodic table, electronic configurations, atomic and ionic sizes, ionization energies, electron
affinity and electronegativity, polarizability, oxidation states, coordination numbers and geometries,
hard soft acids and bases, molecular geometries (H2O, NH3, PCl5, SF6, CCl4, Pt(NH3)2Cl2
UNIT - IV
Stereochemistry (6 lectures)
Representations of 3 dimensional structures, structural isomers and stereoisomers, configurations
and symmetry and chirality, enantiomers, diastereomers, optical activity, absolute configurations
and conformational analysis.
Organic reactions and synthesis of a drug molecule (4 lectures)
Introduction to reactions involving substitution, addition, elimination, oxidation, reduction,
cyclization and ring openings. Synthesis of a commonly used drug molecule(paracetamol and
Aspirin)

Suggested Books:
1) University chemistry, by B. M. Mahan, Pearson Education
2) Chemistry: Principles and Applications, byM. J. SienkoandR. A. Plane
3) Fundamentals of Molecular Spectroscopy, by C. N. Banwell
4) Engineering Chemistry (NPTEL Web-book), by B. L. Tembe, Kamaluddin and M. S.Krishnan
5) Physical Chemistry, by P. W. Atkins
6)Organic Chemistry: Structure and Function by K. P. C. Volhardt and N. E. Schore,5th Edition
http://bcs.whfreeman.com/vollhardtschore5e/default.asp
Note: The paper setter will set the paper as per the question paper templates provided.

Page | 5
BS-103LA Chemistry Lab
L T P Credit Practical Minor Total Time
Test
- - 3 1.5 30 20 50 3h
LIST OF EXPERIMENTS

1. To Determine the surface tension of a given liquid

2. To determine the relative viscosity of a given liquid using Ostwald’s viscometer
3. To identify the number of components present in a given organic mixture by thin layer
chromatography
4. To determine the alkalinity of a given water sample
5. Determination of the strength of a given HCl solution by titrating it with standard NaOH
solution using conductometer
6. Synthesis of a drug (paracetamol/Aspirin)
7. Determination of chloride content of a given water sample
8. To determine the calcium & magnesium or temporary & permanent hardness of a given water
sample by EDTA method
9. To determine the total iron content present in a given iron ore solution by redox titration
10. Determination of the partition coefficient of a substance between two immiscible liquids
11. To find out the content of sodium, potassium in a given salt solution by Flame Photometer
12. To find out the λmax and concentration of unknown solution by a spectrophotometer
13. To find out the flash point and fire point of the given oil sample by Pensky Martin apparatus
14. To determine the amount of dissolved oxygen present in a given water sample
15. To find out the pour point and cloud point of a lubricating oil
16. Determination of the strength of a given HCl solution by titrating it with standard NaOH
solution using pH meter
17. Using Redwood Viscometer find out the viscosity of an oil sample

Note: Atleast 9 experiments to be performed from the list.

ES- Programming for Problem Solving

Page | 6
 105A
L T P Credit Major Minor Total Time
Test Test
3 - - 3 75 25 100 3h
Purpos To familiarize the students with the basics of Computer System and C
e Programming
Course Outcomes
CO 1 Describe the overview of Computer System and Levels of Programming
Languages.
CO 2 Learn to translate the algorithms to programs (in C language).
CO 3 Learn description and applications of conditional branching, iteration and
recursion.
CO 4 To use arrays, pointers and structures to formulate algorithms and programs.
UNIT – I
Overview of Computers: Block diagram and its description, Number systems, Arithmetic of number
systems, Computer Hardware: Printers, Keyboard and Mouse, Storage Devices.
Introduction to programming language: Different levels of PL: High Level language, Assembly language,
Machine language; Introduction to Compiler, Interpreter, Debugger, Linker, Loader, Assembler.
Problem Analysis: Problem solving techniques, Algorithms and Flowchart representation.
UNIT – II
Overview of C: Elements of C, Data types; Storage classes in C; Operators: Arithmetic, relational, logical,
bitwise, unary, assignment and conditional operators, precedence & associativity of operators.
Input/output: Unformatted & formatted I/O function in C.
Control statements: if statement, switch statement; Repetition: for, while, and do-while loop; break,
continue, goto statements.
UNIT – III
Arrays: Definition, types, initialization, processing an array, String handling.
Functions: Definition, prototype, parameters passing techniques, recursion, built-in functions, passing
arrays to functions, returning arrays from functions.
UNIT – IV
Pointers: Declaration, operations on pointers, pointers and arrays, dynamic memory allocation, pointers
and functions, pointers and strings.
Structure & Union: Definition, processing, passing structures to functions, use of union.
Data files: Opening and closing a file, I/O operations on files.

Suggested Books:
1. Brian W. Kernighan Dennis Ritchie, “C Programming Language” Pearson Education India.
2. SubrataSaha,Subhodip Mukherjee:Basic Computation & Programming with ‘C’-Cambridge
University Press.
3. Ajay Mittal, “Programming in C - A Practical Approach”, Pearson.
4. E Balagurusamy :Programming in ANSI C,TMH Education.
5. PradipDey and ManasGhose, “Computer Fundamental and Programming in C”, Oxford Pub.
6. ForouzanBehrouz, “Computer Science: A Structured Programming Approach Using C”, Cengage
Learning.
7. Ashok Kamthane, “Programming in C, 3e”, Pearson Education India..
8. YashwantKanetker, “Let us C”, BPB Publications.
9. A K Sharma, “ Fundamentals of Computers & Programming” DhanpatRai Publications
10. Rajaraman V., “Computer Basic and C Programming”, Prentice Hall of India Learning.

Note: The paper setter will set the paper as per the question paper templates provided.

Page | 7
 ES- Programming for Problem Solving Lab
107LA
L T P CreditPractica Minor Total Time
l Test
- - 2 1 30 20 50 3h
Purpos To Introduce students with problem solving using C Programming language
e
Course Outcomes
CO 1 To formulate the algorithms for simple problems
CO 2 Implementation of arrays and functions.
CO 3 Implementation of pointers and user defined data types.
CO 4 Write individual and group reports: present objectives, describe test procedures
and results.

LIST OF PROGRAMS
1. Write a program to find the sum of individual digits of a positive integer.
2. Write a program to generate the first n terms of the Fibonacci sequence.
3. Write a program to generate all the prime numbers between 1 and n, where n is the input
value given by the user.
4. Write a program to find the roots of a quadratic equation.
5. Write a function to generate Pascal’s triangle.
6. Write a program for addition of Two Matrices
7. Write a program for calculating transpose of a matrix.
8. Write a program for Matrix multiplication by checking compatibility
9. Write programs to find the factorial of a given integer by using both recursive and non-
recursive functions.
10. Write a function that uses functions to perform the count the lines, words and characters in a
given text.
11. Write a program to explores the use of structures, union and other user defined variables
12. Write a program to print the element of array using pointers
13. Write a program to implement call by reference
14. Write a program to print the elements of a structure using pointers
15. Write a program to read a string and write it in reverse order
16. Write a program to concatenate two strings
17. Write a program to check that the input string is a palindrome or not.
18. Write a program which copies one file to another.
19. Write a program to reverse the first n characters in a file.

Note: At least 10 programs are to be performed & executed from the above list.

Page | 8
 HM-101 A English
L T P Credit Major Minor Total Time
Test Test
2 - - 2 75 25 100 3h
Course Outcomes
CO 1 Building up the vocabulary
CO 2 Students will acquire basic proficiency in English including writing skills
UNIT- 1
Vocabulary Building
1.1 The concept of Word Formation
1.2 Root words from foreign languages and their use in English
1.3 Acquaintance with prefixes and suffixes from foreign languages in English to formderivatives.
1.4 Synonyms, antonyms, and standard abbreviations.
UNIT- 2
Basic Writing Skills
2.1 Sentence Structures
2.2 Use of phrases and clauses in sentences
2.3 Importance of proper punctuation
2.4 Creating coherence
2.5 Organizing principles of paragraphs in documents
2.6 Techniques for writing precisely
UNIT- 3
Identifying Common Errors in Writing
3.1 Subject-verb agreement
3.2 Noun-pronoun agreement
3.3 Misplaced modifiers
3.4 Articles
3.5 Prepositions
3.6 Redundancies
3.7 Clichés
UNIT- 4
Nature and Style of sensible Writing
4.1 Describing
4.2 Defining
4.3 Classifying
4.4 Providing examples or evidence
4.5 Writing introduction and conclusion
4.6 Comprehension
4.7 Précis Writing
4.8 Essay Writing
Suggested Books:
(i) Practical English Usage. Michael Swan. OUP. 1995.
(ii) Remedial English Grammar. F.T. Wood. Macmillan.2007
(iii)On Writing Well. William Zinsser. Harper Resource Book. 2001
(iv) Study Writing. Liz Hamp-Lyons and Ben Heasly.Cambridge University Press. 2006.
(v) Communication Skills. Sanjay Kumar and PushpLata.Oxford University Press. 2011.
(vi) Exercises in Spoken English. Parts.I-III. CIEFL, Hyderabad. Oxford University Press

Note: The paper setter will set the paper as per the question paper templates provided.
HM- Language Lab

Page | 9
 103LA
L T P Credit Practical Minor Tota Time
Test l
- - 2 1 30 20 50 3h

OBJECTIVES

1. Listening Comprehension
2. Pronunciation, Intonation, Stress and Rhythm
3. Common Everyday Situations: Conversations and Dialogues
4. Communication at Workplace
5. Interviews
6. Formal Presentations

BS-135A Multivariable Calculus and Linear Algebra

Page | 10
 L T P Credit Major Minor Total Time
Test Test
3 1 - 4 75 25 100 3h
Purpose To familiarize the prospective engineers with techniques in calculus, sequence
& series, multivariable calculus, and linear algebra.
Course Outcomes
CO1 To introduce the idea of applying differential and integral calculus to notions of
improper integrals. Apart from some applications it gives a basic introduction on
Beta and Gamma functions.
CO 2 To introduce the fallouts of Rolle’s Theorem that is fundamental to application of
analysis to Engineering problems.
CO 3 To develop the tool of power series and Fourier series for learning advanced
Engineering Mathematics.
CO 4 To familiarize the student with functions of several variables that is essential in
most branches of engineering.
CO 5 To develop the essential tool of matrices and linear algebra in a comprehensive
manner.
UNIT-I (12 hrs)
Calculus: Evaluation of definite and improper integrals: Beta and Gamma functions and their
properties; Applications of definite integrals to evaluate surface areas and volumes of revolutions.
Rolle’s Theorem, Mean value theorems, Indeterminate forms and L'Hospital's rule.
UNIT-II (12 hrs)
Sequence and Series: Convergence of sequence and series, tests for convergence (Comparison test,
D’Alembert’s Ratio test, Logarithmic test, Cauchy root test, Raabe’s test); Power series.
Fourier series: Introduction, Fourier-Euler Formula, Dirichlet’s conditions, Change of intervals,
Fourier series for even and odd functions, Half range sine and cosine series.
UNIT-III (09 hrs)
Multivariable Calculus (differentiation): Taylor's series (for one and more variables), series for
exponential, trigonometric and logarithm functions.
Partial derivatives, Total differential, Chain rule for differentiation, Homogeneous functions, Euler’s
theorem, Jacobian, Maxima, minima and saddle points; Method of Lagrange multipliers.
UNIT-IV (07 hrs)
Matrices: Rank of a matrix, elementary transformations, elementary matrices, Gauss Jordon method
to find inverse using elementary transformations, normal form of a matrix, linear dependence and
independence of vectors, consistency of linear system of equations, linear and orthogonal
transformations, eigenvalues and eigenvectors, properties of eigenvalues, Cayley – Hamilton
theorem and its applications.
Suggested Books:
1.ErwinKreyszig, Advanced Engineering Mathematics, 9th Edition, John Wiley & Sons, 2006.
2. Erwin Kreyszig and SanjeevAhuja, Applied Mathematics- I, Wiley India Publication, Reprint 2015.
3. G.B. Thomas and R.L. Finney, Calculus and Analytic geometry, 9th Edition, Pearson, Reprint, 2002.
4. Veerarajan T., Engineering Mathematics for first year, Tata McGraw-Hill, New Delhi, 2008.
5. Ramana B.V., Higher Engineering Mathematics, Tata McGraw Hill New Delhi, 11th Reprint, 2010.
6. D. Poole, Linear Algebra: A Modern Introduction, 2nd Edition, Brooks/Cole, 2005.
7. N.P. Bali and Manish Goyal, A text book of Engineering Mathematics, Laxmi Publications, Reprint,
2008.
8. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 36th Edition, 2010.

Note: The paper setter will set the paper as per the question paper templates provided.
BS-136A Calculus and Ordinary Differential Equations

Page | 11
 L T P Credit Major Minor Total Time
Test Test
3 1 - 4 75 25 100 3h
Purpose To familiarize the prospective engineers with techniques inmultivariate integration, ordinary
and partial differential equations and complex variables.
Course Outcomes
CO1 To introduce effective mathematical tools for the solutions of differential equations that model
physical processes.
CO 2 To acquaint the student with mathematical tools needed in evaluating multiple integrals and
their usage.
CO 3 To introduce the tools of differentiation and integration of functions of complex variable thatare
used in various techniques dealing engineering problems.

UNIT-I (10 hrs)

First order ordinary differential equations: Exact, linear and Bernoulli’s equations, Euler’s equations,
Equations not of first degree:equations solvable for p, equations solvable for y, equations solvable for x
and Clairaut’s type.
Ordinary differential equations of higher orders:
Second order linear differential equations with constant coefficients, method of variation of parameters,
Cauchy and Legendre’s linear differential equations.

UNIT-II (10 hrs)

Multivariable Calculus (Integration): Multiple Integration: Double integrals (Cartesian), change of
order of integration in double integrals, Change of variables (Cartesian to polar)
Applications: areas and volumes; Triple integrals (Cartesian), orthogonal curvilinear coordinates, Simple
applications involving cubes, sphere and rectangular parallelepipeds.

UNIT-III (10hrs)
Vector Calculus: Introduction, Scalar and Vector point functions, Gradient, divergence & Curl and their
properties, Directional derivative.
Line integrals, surface integrals, volume integrals, Theorems of Green, Gauss and Stokes (without proof).

UNIT-IV (10 hrs)

Complex Variable – Differentiation: Differentiation, Cauchy-Riemann equations, analytic functions,
harmonic functions, findingharmonic conjugate; elementary analytic functions (exponential,
trigonometric, logarithm) andtheir properties;
Complex Variable – Integration:Contour integrals, Cauchy-Goursat theorem (without proof), Cauchy
Integral formula (withoutproof), Taylor’s series,zeros of analytic functions, singularities, Laurent’s series;
Residues, Cauchy Residue theorem (without proof).

Suggested Books:
1. G.B. Thomas and R.L. Finney, Calculus and Analytic geometry, 9th Edition, Pearson,Reprint, 2002.
2. Erwin kreyszig, Advanced Engineering Mathematics, 9th Edition, John Wiley & Sons, 2006.
3. Erwin kreyszig and SanjeevAhuja, Applied Mathematics- II, Wiley India Publication, 2015.
4. W. E. Boyce and R. C. DiPrima, Elementary Differential Equations and Boundary ValueProblems, 9th
Edn., Wiley India, 2009.
5. S. L. Ross, Differential Equations, 3rd Ed., Wiley India, 1984.
6. E. A. Coddington, An Introduction to Ordinary Differential Equations, Prentice HallIndia, 1995.
7. E. L. Ince, Ordinary Differential Equations, Dover Publications, 1958.
8. J. W. Brown and R. V. Churchill, Complex Variables and Applications, 7th Ed., Mc-Graw Hill,2004.
9. N.P. Bali and Manish Goyal, A text book of Engineering Mathematics, Laxmi Publications, Reprint, 2008.
10. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 36th Edition, 2010.
Note: The paper setter will set the paper as per the question paper templates provided.

Page | 12
 Course code ES-109A
Coursetitle EngineeringGraphics&Design
Scheme and Credits L T P Credits Major Minor Tota Time
Test Test l
1 2 0 3 75 25 100 3h
Course Outcomes
Objective- To expose students to the basics of Engineering Drawing, graphics and
Projections.
CO-1 To learn about construction of various types of curves and scales.
CO-2 To learn about orthographic projections of points, lines and planes.
CO-3 To Learn about the sectional views and development of Right regular solids
CO-4 To Learn about the construction of Isometric Projections and conversion of
Isometric views to Orthographic views and vice-versa.
UNIT - I
IntroductiontoEngineeringDrawing:
Principles of Engineering Graphics and their significance, usage of Drawing instruments, lettering,
Conic sections including the Rectangular Hyperbola (General method only); Cycloid, Epicycloid,
Hypocycloid and Involute; Scales – Plain, Diagonal and Vernier Scales;
UNIT - II
Orthographic Projections:
PrinciplesofOrthographicProjections-Conventions-Projections ofPointsandlinesinclined
tobothplanes;Projectionsofplanesinclined to one principalPlane.
ProjectionsofRegular Solids:
Solid with axis inclinedtoboththePlanes;
UNIT - III
Sections andSectionalViewsofRightRegular Solids:
Sectional views of simple right regular solids like prism, pyramid, Cylinder and Cone. Development
ofsurfacesofRightRegularSolids-Prism,Pyramid,CylinderandCone;
UNIT - IV
Isometric Projections:
Principles of Isometric projection – Isometric Scale, Isometric Views, Conventions; Isometric Views
of lines, Planes, Simple and compound Solids; Conversion of IsometricViews to Orthographic Views
and Vice-versa, Conventions;
Suggested Books:
1. Engineering Graphics using AUTOCAD 2000: T. Jeyapoovan, Vikas Publishing House.
2. Engineering Drawing: Plane and Solid Geometry: N.D. Bhatt and V.M.Panchal, Charotar Publishing
House.
3. Engineering Drawing: Amar Pathak, Dreamtech Press, New Delhi.
4. Thomas E.French, Charles J.Vierck, Robert J.Foster, “Engineering drawing and graphic technology”,
McGraw Hill International Editions.
5. Engineering Graphics and Drafting: P.S. Gill, Millennium Edition, S.K. Katariaand Sons.
6. A Primer on Computer aided Engineering Drawing-2006, published by VTU, Belgaum.
7. A.Yarwood, Introduction to AutoCAD 2017, Published by CRC Press.
8. O. Ostrowsky, Engineering Drawing with CAD applications, Butterworth Heinemann,1999.
9. BSI, Technical production documentation (TPD) – specification for defining, specifying and
graphically reporting products, BS8888, 2002.
10. Corresponding’stoCADSoftwareTheoryandUserManuals.
Note: The paper setter will set the paper as per the question paper templates provided.

Page | 13
Course code ES-113LA
Coursetitle EngineeringGraphics&Design Practice
Scheme and Credits L T P Credit Practical Minor Total Time
s Test
- - 3 1.5 30 20 50 3h
Pre-requisites(if any) -

Aim: To make student practice on engineering graphics and designsoftwaresand provide

exposuretothevisualaspectsofengineeringdesign.
CO-1 To give an overview of the user interface and toolboxes in a CAD software.
CO-2 To understand to customize settings of CAD software and produce CAD drawing.
CO-3 To practice performing various functions in CAD softwares.
CO-4 To Learn about solid modelling and demonstration of a simple team design project.

Module 1:OverviewofComputerGraphics:
Listingthecomputertechnologiesthatimpactongraphicalcommunication,Demonstrating
Knowledgeofthetheory ofCADsoftware[suchas:TheMenuSystem,Toolbars(Standard,
ObjectProperties,Draw,Modify andDimension),DrawingArea(Background,Crosshairs,
CoordinateSystem),Dialogboxes andwindows,Shortcutmenus(Button Bars),The
CommandLine(whereapplicable),TheStatusBar,Differentmethodsofzoom asusedin
CAD,Selectanderaseobjects.; IsometricViewsoflines,Planes, Simpleandcompound Solids];
Module2:Customization &CAD Drawing:
Setupofthedrawingpageandtheprinter,includingscalesettings,Settingup ofunitsanddrawing
limits;ISOand ANSIstandardsforcoordinatedimensioningandtolerancing; Orthographic
constraints, Snap to objects manually and automatically;
Producingdrawingsbyusingvariouscoordinateinputentrymethodstodrawstraightlines,Applyingva
riouswaysofdrawingcircles;
Module3:Annotations,layering&other functions:
Applyingdimensionstoobjects,applyingannotationstodrawings;Settingupanduseof
Layers,layerstocreatedrawings,Create,editandusecustomizedlayers; Changingline
lengthsthroughmodifyingexisting lines(extend/lengthen);Printingdocumentstopaper
usingtheprintcommand;orthographicprojection techniques;Drawingsectionalviewsof
compositerightregulargeometricsolids andprojectthetrueshapeof thesectionedsurface; Drawing
annotation,Computer-aideddesign(CAD)softwaremodelingof partsand
assemblies.Parametricandnon-parametricsolid,surface,and wireframemodels.Partediting
andtwo-dimensionaldocumentationofmodels.Planarprojectiontheory,includingsketching of
perspective,isometric,multiview,auxiliary,andsectionviews.Spatialvisualization
exercises.Dimensioning guidelines,tolerancingtechniques; dimensioningandscalemulti
viewsofdwelling;
Module4:Demonstration ofasimpleteamdesign project:
Geometryandtopologyofengineeredcomponents:creation ofengineeringmodelsandtheir
presentationinstandard2Dblueprintform andas3Dwire-frameandshadedsolids;meshed
topologiesforengineeringanalysisandtool-path generationforcomponentmanufacture;
geometricdimensioningandtolerancing;Useof solid-modelingsoftwareforcreating
associativemodels atthecomponentand assemblylevels;floorplans thatinclude:
windows,doors,andfixturessuchasWC,bath,sink,shower,etc.Applying colourcodingaccordingto
buildingdrawingpractice;Drawingsectionalelevation showingfoundation toceiling;
IntroductiontoBuildingInformationModeling (BIM).
Suggested Books(ES-113L):

Page | 14
1. Chris McMahon and Jimmie Browne, CAD/CAM – Principle Practice and Manufacturing
Management, Addison Wesley England, Second Edition, 2000.
2. Chougule N.K.; CAD/CAM /CAE, Scitech Publications India Pvt. Ltd.
3. Vikram Sharma; Computer Aided Design and Manufacturing, S.K. Kataria and Sons.
4. Rogers, D.F. and Adams, A., Mathematical Elements for Computer Graphics, McGraw Hill Inc,
NY, 1989
5. Ibrahim Zeid, CAD/CAM theory and Practice, Tata McGraw Hill Publishing Co. Ltd., New
Delhi, 1992.
6. M.P. Groover, Automation, Productions systems and Computer-Integrated Manufacturing by
Prentice – Hall.
7. A Primer on Computer aided Engineering Drawing-2006, published by VTU, Belgaum.
8. A.Yarwood, Introduction to AutoCAD 2017, Published by CRC Press.
9. O. Ostrowsky, Engineering Drawing with CAD applications, Butterworth Heinemann,1999.
10. BSI, Technical production documentation (TPD) – specification for defining, specifying and
graphically reporting products, BS8888, 2002.
11. (Correspondingsetof)CADSoftwareTheoryandUserManuals
12. Ibrahim Zeid, Mastering CAD/CAM, Tata McGraw Hill Publishing Co. Ltd., New Delhi.
13. P. Radhakrishnan, S. Subramanayan and V.Raju, CAD/CAM/CIM, New Age International (P)
Ltd., New Delhi.
14. Groover M.P. and Zimmers E. W., CAD/CAM: Computer Aided Design and Manufacturing,
Prentice Hall International, New Delhi, 1992.
15. Dr. Sadhu Singh, Computer Aided Design and Manufacturing, Khanna Publishers, New Delhi,
Second Edition, 2000.
16. Thomas E.French, Charles J.Vierck, Robert J.Foster, “Engineering drawing and graphic
technology”, McGraw Hill International Editions.

Page | 15
Course code ES-111LA
Coursetitle ManufacturingProcessesWorkshop
Scheme and L T P Credits Practical Minor Total Time
Credits Test
0 0 3 1.5 60 40 100 3h
Pre-requisites
(if any)

Aim: To make student gain a hands on work experience in a typical manufacturing

industry environment.
CO-1 To familiarize with different manufacturing methods in industries and work on
CNC machine.
CO-2 To learn working in Fitting shop and Electrical and Electronics shops,
CO-3 To practice working on Carpentry and Plastic moulding/glass cutting jobs.
CO-4 To gain hands on practice experience on Metal casting and Welding jobs.

ManufacturingProcessesWorkshop
Contents
1.ManufacturingMethods-casting,forming,machining,joining, advancedmanufacturing methods
2. CNCmachining, Additivemanufacturing
3. Fittingoperations&powertools
4. Electrical&Electronics
5. Carpentry
6. Plasticmoulding,glasscutting
7. Metalcasting
8. Welding(arc welding&gas welding), brazing

Suggested Books:
1. Kalpakjian S. And Steven S. Schmid, “Manufacturing Engineering and Technology” ,
7th edition, Pearson Education India Edition.
2. HajraChoudhury S.K., HajraChoudhury A.K. and Nirjhar Roy S.K., “ Elements of
Workshop Technology” , Vol. I 2008 and Vol. II 2010, Media promoters and
publishers private limited, Mumbai.
3. Gowri P. Hariharan and A. Suresh Babu,” Manufacturing Technology – I” Pearson
Education, 2008.
4. Roy A. Lindberg, “ Processes and Materials of Manufacture” , 4th edition, Prentice Hall
India, 1998
5. Rao P.N., “ Manufacturing Technology” , Vol. I and Vol. II, Tata McGraw-Hill House,
2017.

Page | 16
 BS- Biology
141A
L T P Credit Major Minor Test Total Time
Test
2 1 - 3 75 25 100 3h
Purpos To familiarize the students with the basics of Biotechnology
e
Course Outcomes
CO1 Introduction to essentials of life and macromolecules essential for growth and
Development
CO2 Defining the basic concepts of cell division, genes and Immune system
CO3 Introduction of basic Concept of ThermoGenetic Engg. & Biochemistry
CO4 Introduction of basic Concept of Microbiology & Role of Biology in Different Fields
Unit – I
Introduction to living world: Concept and definition of Biology; Importance of biology in major discoveries
of life Characteristic features of living organisms; Cell ultra-structure and functions of cell organelles like
nucleus, mitochondria,chloroplast, ribosomes and endoplasmic reticulum; Difference between prokaryotic
and eukaryotic cell; Difference between animal and plant cell.
Classification of organisms: Classify the organisms on the basis of (a) Cellularity;- Unicellular and
Multicellular organisms. (b) Energy and Carbon Utilization:- Autotrophs, Hetrotrophs and Lithotrops (c)
Habitat (d) Ammonia excretion:- ammonotelic, ricotelic and ureotelic. (e) Habitat- acquatic or terrestrial (e)
Molecular taxonomy- three major kingdoms of life
Unit-II
Introduction to Biomolecules: Definition, general classification and important functions of carbohydrates,
lipids, proteins, nucleic acids (DNA& RNA: Structure and forms). Hierarch in protein structure: Primary
secondary, tertiary and quaternary structure. Proteins as enzymes, transporters, receptors and structural
elements.
Enzymes as biocatalysts: General characteristics, nomenclature and classification of Enzymes. Effect of
temperature, Ph, enzyme and substrate concentrations on the activity of enzymes. Elementary concept of and
coenzymes. Mechanism of enzyme action. Enzyme kinetics and kinetic parameters (Km and Vmax)
Unit-III
Genetics:-Mendel’s laws of inheritance. Variation and speciation.Concepts of recessiveness and dominance.
Genetic Disorders: Single gene disorders in human. Human traits: Genetics of blood groups, diabetes type I &
II.
Cell Division:- Mitosis and its utility to living systems. Meiosis and its genetic significance.Evidence of nucleic
acids as a genetic material. Central Dogma of molecular biology
4. Role of immune system in health and disease: Brief introduction to morphology and pathogenicity of
bacteria, fungi, virus, protozoa beneficial and harmful for human beings.
Unit-IV
Metabolism:-Concept of Exothermic and endothermic reactions. Concept of standard free energy and
Spontaneity in biological reactions. Catabolism (Glycolysis and Krebs cycle) and synthesis of glucose
(Photosynthesis:- Light and Dark Reaction) of glucose. ATP as Energy Currency of the cell
Microbiology: Concept of species and strains, sterilization and media compositions, growth kinetics.
Role of Biology :Role of Biology in Agriculture, Medicine, Forensic science, Bioinformatics, Nanotechnology,
Micro-electromechanical systems (Bio-MEMS) and Sensors (Biosensors).
Text Book:
1. Introduction to Biotechnology, By Deswal&Deswal, DhanpatRai Publications N.A
2.Campbell, J. B. Reece, L. Urry, M. L. Cain and S. A. Wasserman, “Biology: A global approach”, Pearson
Education Ltd, 2014.
3. E. E. Conn, P. K. Stumpf, G. Bruening and R. H. Doi, “Outlines of Biochemistry”, John Wiley and Sons, 2009.
D. L. Nelson and M. M. Cox, “Principles of Biochemistry”, W.H. Freeman and Company, 2012.
4.G. S. Stent and R. Calendar, “Molecular Genetics”, Freeman and company, 1978.
Note: The paper setter will set the paper as per the question paper templates provided

Page | 17
Suggested Books:
1. Molecular Biology of cell, 4th ed. Alberts, Bruce et al. Garland Science Publishing, New York.
2. Microbiology. Pelczar Jr., M.J.; Chan, E.C.S. and Krieg, N.R. Tata McGraw Hill, New Delhi.
3. Lehninger: Principles of Biochemistry, 3rd edition, by David L. Nelson and M.M. Cox. Maxmillan/ Worth
publishers.
4. Genetics by Snusted& Simmons.
5. Molecular Biotechnology: Principles Application of Recombinant DNA. Glick, B. R. and Pasternak, J. J. ASM
press WashingtonDC.
6. Kuby’s Immunology, Goldsby, R A,.Kindt, T.J, Osborne, B.A.(2003) W. H. Freeman and company, New York.
7. Recombinant DNA 2nd Edition. Watson, James D. and Gilman, M. (2001) W.H Freeman and Company,
NewYork.
8. Essentials of Molecular Biology 4thed, Malacinski, G. M. (2003) Jones &Bartlet Publishers, Boston.

Page | 18
 ES-101A BASIC ELECTRICAL ENGINEERING
L T P Credit Major Test Minor Test Total Time(Hrs)
4 1 - 5 75 25 100 3
To familiarize the students with the basics of Electrical
Purpose Engineering
Course Outcomes
CO1 Deals with steady state circuit analysis subject to DC.
CO 2 Deals with AC fundamentals & steady state circuit response subject to AC.
Deals with introductory Balanced Three Phase System analysis and Single Phase
CO 3 Transformer.
CO 4 Explains the Basics of Electrical Machines & Electrical installations
Unit-I
D.C. circuits: Ohm’s Law, junction, node, circuit elements classification: Linear & nonlinear, active & passive,
lumped & distributed, unilateral & bilateral with examples. KVL, KCL, Loop and node-voltage analysis of
resistive circuit.Star-Delta transformation for resistors.
Network Theorems: Superposition, Thevenin’s, Norton’s and Maximum power transfer theorems in a
resistive network.
Unit-II
AC Fundamentals: Mathematical representation of various wave functions. Sinusoidal periodicsignal,
instantaneous and peak values, polar & rectangular form of representation of impedances and phasor
quantities. Addition & subtraction of two or more phasor sinusoidal quantities using component resolution
method.RMS and average values of various waveforms.
A.C. Circuits: Behavior of various components fed by A.C. source (steady state response of pureR, pure L, pure
C, RL, RC, RLC series with waveforms of instantaneous voltage, current & power on simultaneous time axis
scale and corresponding phasor diagrams), power factor, active, reactive & apparent power. Frequency
response of Series & Parallel RLC ckts.including resonance, Q factor, cut-off frequency & bandwidth.
Generation of alternating emf.
Unit-III
Balanced Three Phase Systems: Generation of alternating 3- phaseemf). 3-phase balanced circuits, voltage
and current relations in star and delta connections. Measurement of 3-phase power by two wattmeter method
for various types of star & delta connected balanced loads.
Single Phase Transformer (qualitative analysis only): Concept of magnetic circuits.Relation between MMF &
Reluctance.Hysteresis & Eddy current phenomenon.Principle, construction &emf equationPhasor diagram at
ideal, no load and on load conditions. Losses & Efficiency, regulation. OC & SC test, equivalent circuit, concept
of auto transformer.
Unit-IV
Electrical Machines (qualitative analysis only): Construction and working of dc machine with commutator
action, speed control of dc shunt motor. Generation of rotating magnetic fields, Construction and working of a
three-phase induction motor, Significance of torque-slip characteristic. Basics of Single-phase induction
motor, capacitor start capacitor run Single-phase induction motor working. Basic construction and working of
synchronous generator and motor.
Electrical Installations (LT Switchgear): Switch Fuse Unit (SFU), MCB, ELCB, MCCB, Types of Wires and
Cables, Earthing.
Suggested Books:
1. Basic Electrical Engg: A complete Solution by Vijay Kumar Garg, Wiley India Ltd.
2. Electrical Engg. Fundamentals by Rajendra Prasad, PHI Pub.
3. Basic Electrical Engg.by S.K. Sahdev, Pearson Education
4. Electrical Engg. Fundamentals:byBobrow, Oxford Univ.Press
5. Basic Electrical Engg. By Del Toro.
6. Saxena&Dasgupta: Fundamentals of Electrical Engg (Cambridge University Press).

Note: The paper setter will set the paper as per the question paper templates provided.

Page | 19
ES-103LA BASIC ELECTRICAL ENGINEERING LAB
L T Practic Credit Minor Test (Practical) Tota Time (Hrs)
al l
- - 2 1 20 30 50 3
Purpose To familiarize the students with the Electrical TechnologyPracticals
Course Outcomes
Understand basic concepts of Network
CO1 theorems
Deals with steady state frequency response of RLC circuit parameters solution
CO 2 techniques
Deals with introductory Single Phase Transformer
CO 3 practicals
Explains the constructional features and practicals of various types of Electrical
CO 4 Machines

LIST OF EXPERIMENTS

1. To verify KVL and KCL.

2. To verify Superposition theorem on a linear circuit with at least one voltage & one current
source.
3. To verify Thevenin’s Theorem on a linear circuit with at least one voltage & one current
source.
4. To verify Norton's Theorem on a linear circuit with at least one voltage & one current
source.
5. To study frequency response of a series R-L-C circuit on CRO and determine resonant
frequency& Q- factor for various Values of R, L, and C.
6. To study frequency response of a parallel R-L-C circuit on CRO and determine resonant
frequency& Q -Factor for various values of R, L, and C.
7. To perform O.C. and S.C. tests on a single phase transformer.
8. To perform direct load test on a single phase transformer and plot efficiency v/s load
characteristic.
9. To perform speed control of DC shunt motor.
10. To perform starting & reversal of direction of a three phase induction motor.
11. Measurement of power in a 3 phase balanced system by two watt meter method.
12. Study of Cut sections of DC Machines, Induction Motor
13. To study components of various LT Switchgears

Note: At least 9 out of the listed experiments to be performed during the semester.

Page | 20