Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    Data Sheet 169en Hardox&#174 550 2019-01-31

    Uploaded by

    sameeralibraheem

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Data Sheet 169en Hardox&#174 550 2019-01-31

    Uploaded by

    sameeralibraheem
    3 views2 pages

    Original Title

    Data_sheet_169en_Hardox®_550_2019-01-31

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views2 pages

    Data Sheet 169en Hardox&#174 550 2019-01-31

    Uploaded by

    sameeralibraheem

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Data sheet 169en Hardox® 550 2019-01-31

    Hardox® 550
    General Product Description
    At 550 HBW and with a toughness close to Hardox® 500
    Hardox® 550, with a nominal hardness of 550 HBW and toughness close to Hardox® 500, increases wear life but not at the expense of crack integrity.

    Dimension Range
    Hardox® 550 is supplied in plate thickness of 8.0 – 65 mm, up to 2900 mm in width and up to 14630 mm in length. More detailed information on dimensions
    is provided in the dimension program.

    Mechanical Properties
    Product Thickness Hardness 1)
    (mm) (HBW)
    Hardox® 550 plate 8.0 - 65.0 525 - 575
    1) Brinell hardness, HBW, according to EN ISO 6506-1, on a milled surface 0.5 – 3 mm below surface for plate. At least one test specimen per heat and 40 tons.

    The nominal material thickness will not deviate more than ± 15 mm from that of the test specimen.

    Hardox® wear plate is through-hardened. Minimum core hardness is 90 % of the guaranteed minimum surface hardness.
    Impact Properties
    Product Longitudinal test, typical impact energy,
    Charpy V 10x10 mm test specimen
    Hardox® 550 plate 30 J / -40 °C

    Chemical Composition (heat analysis)


    C *) Si *) Mn*) P S Cr*) Ni*) Mo*) B*)
    (max %) (max %) (max %) (max %) (max %) (max %) (max %) (max %) (max %)
    0.44 0.50 1.30 0.020 0.010 1.40 1.40 0.60 0.004
    The steel is grain refined. *) Intentional alloying elements.

    Carbon Equivalent CET(CEV)


    Product type Plate Plate Plate
    Thickness (mm) 8.0 - 31.9 32.0 - 51.0 51.1 - 65.0
    Max CET(CEV) 0.49 (0.70) 0.52 (0.75) 0.61 (0.82)
    Typ CET(CEV) 0.46 (0.67) 0.49 (0.72) 0.58 (0.79)
    Data sheet 169en Hardox® 550 2019-01-31

    Tolerances
    More details are given in SSAB’s brochure Hardox® Guarantees or at www.ssab.com.
    Thickness
    Tolerances according to Hardox® Thickness Guarantees.
    Hardox® Guarantees meet the requirements of EN 10029 Class A, but offer more narrow tolerances.
    Length and Width
    According to SSAB’s dimension program.
    Tolerances according to SSAB´s mill edge standards or tolerances that conform to EN 10029.
    Shape
    Tolerances according to EN 10029.
    Flatness
    Tolerances according to Hardox® Flatness Guarantees Class D, which are more restrictive than EN 10029 class N.
    Surface Properties
    According to EN 10163-2 Class A, Subclass 1.

    Delivery Conditions
    The delivery condition is Q or QT (Quenched or Quenched and Tempered). The plates are delivered with sheared or thermally cut edges. Untrimmed mill
    edges available by agreement.

    Delivery requirements can be found in SSAB’s brochure Hardox® Guarantees or www.ssab.com.

    Fabrication and Other Recommendations


    Welding, bending and machining
    Recommendations can be found in SSABs brochures at www.hardox.com or consult Tech Support.

    Hardox® wear plate is not intended for further heat treatment. It has obtained its mechanical properties by quenching and when necessary by means of
    subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 250ºC .

    Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, especially of primer
    coated plates, may produce dust with a high particle concentration.

    Contact Information
    www.ssab.com/contact

    The English version of this document shall prevail in case of discrepancy. Minor changes and updates to the document may occur, please download
    the latest version of this document at www.ssab.com
    SSAB, Strenx, Hardox, Docol, GreenCoat, Toolox, Armox, Ramor, SSAB Domex, SSAB Laser, Raex, Duroxite are trademarks owned by the SSAB group
    of companies.

    You might also like