TOTO U.S.A., Inc.

1155 Southern Road Morrow, GA 30260

Phone : (770) 282-8686

Warranty Registration and Inquiry

For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit
our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please
contact TOTO U.S.A. Inc.,
Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300
when calling from outside of U.S.A.

• You are advised to record the following information to allow quick service.
Date of purchase : Name of shop :

Date : year month day

Tel : ( )

2022.3.25
D07E74
 Instruction Manual

WASHLET

SW3074T40
SW3074
SW3024

SW3073
SW3023

■■ Thank you for your recent purchase of this product.

Please read the enclosed information to ensure the safe use of your product.
■■ Be sure to read this Instruction Manual before using your product and keep it in a safe place
for future reference.
 What functions are available on your product?

Model No.

SW3074T40
Model No. SW3024
SW3074
SW3023
SW3073
Functions Ref. Page

Rear washing ● ●

Washing Rear soft washing ● -

Front washing ● ●

Wand position
adjustment
17
Basic Water pressure
Functions Changing the washing adjustment ● ●
method
Oscillating washing

Pulsating washing

Drying Warm air drying ● ●

Changing Temperature
● ● 18, 19
the temperature adjustment

Removing odors Deodorizer ● -

Sanitary "EWATER+" cleaning Auto wand CLEAN ● - 16

Functions

Bowl pre-cleaning Pre-mist ● -

Heating the toilet seat Heated seat ● ● -

Convenience
Auto energy saver
Functions
Saving energy ● ● 20, 21
Timer energy saver

Main Unit One-touch

30, 31
removal
Maintenance Removable toilet lid ● ● 32

Wand cleaning 33

2
 Table of Contents

Keep It
Safety Precautions................ 4

Introduction
Operational Precautions ..... 11
Parts Names ........................ 12

Clean
Preparation .......................... 14

Basic Operations................. 16
Mechanism of Auto Functions

Sanitary Toilet (SW3074T40, SW3074, SW3073) ... 16

Deodorizer,
Auto wand CLEAN, Pre-mist

Operation
Using the Control Panel ...... 17
Lights to show
that the "CLEAN" Temperature Adjustment
functions are
operating. (Toilet Seat, Warm Water,
Drying) .................................. 18
Energy Saver Features ...... 20
Various Operations ............. 24
Setting List .......................... 24
Auto functions ..................... 26
Maintenance ........................ 28
Power Plug .......................... 28
Main Unit ............................. 29

Maintenance
Gap between the Main Unit
and Bowl Unit ...................... 30
Gap between the Main Unit
and the Toilet Lid ................ 32
Deodorizing Filter ................ 33
Wand ................................... 33
Wand cleaning
Water Filter Drain Valve ...... 34

What to Do? ......................... 35

The self-cleaning functions
If the water does not flow due to
operate automatically.
a water service interruption ...... 35
(See page 16 for details.)
Freeze Damage Prevention .. 36
Long Periods of Disuse ....... 37
Reference

As you sit As you stand up

Removing odors inside Troubleshooting................... 38
Deodorizer*1 Auto power deodorizer*1
the bowl unit. Specifications ...................... 42
A mist is automatically sprayed
inside the bowl unit to make it Pre-mist*2 Limited Warranty ................. 43
more difficult for dirt to adhere.
Cleans the wand with
Auto wand CLEAN*3
"EWATER+"
*1 Only used on models with "Deodorizer" function
*2 Only used on models with "Pre-mist" function
*3 Only used on models with "Auto wand CLEAN" function

3
 Safety Precautions
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING

Symbols and Meanings

WARNING May result in death or serious injury.

CAUTION May result in injury or property damage.

The following symbols are used to indicate important safety instructions for the use of the product.

Symbol Meaning

This symbol indicates a prohibited use of the product.

This symbol is used to indicate a required step in the use of this product.

WARNING
Do not plug or unplug the power plug with wet hands.
••Doing so may cause electrical shock.

Do not get any water or cleaning solution on the main unit or power plug.
••Doing so may cause fire, electrical shock, heat or short circuit.
••Doing so may cause the product to crack resulting in injury or water damage.

Never disassemble, repair or alter.

Doing so may cause fire, electrical shock, overheating, short circuit or breakdown.

Do not install the product on moving vehicles such as wheeled vehicles or boats.
••Doing so may cause fire, electric shock, short circuit or malfunction.
••The toilet seat, toilet lid, main unit, or other parts may come loose and fall off, resulting in injury.

Do not use the product if a malfunction occurs.

••In case of breakdown or other problem, be sure to cut off power by means such as unplugging the power plug.
Close the water shutoff valve to stop water supply.
Possible malfunctions:
−−Water is leaking from a pipe or the main unit.
−−The product is cracked or broken.
−−The product makes a strange noise or emits a strange odor.
−−The product emits smoke.
−−The product is abnormally hot.
−−The toilet seat cushion is out of place.
••Continued use after malfunction could cause a fire, electric shock, heat, short circuit, injury or
water damage.

4
 WARNING

Introduction
Do not use other water then allowed by the laws and ordinances of the
region of use. Only Use potable water.
Do not use seawater or recycled water.
••Doing so may cause irritation to the skin and malfunction.

Do not touch the power plug during thunderstorms.

••Doing so may cause electrical shock.

Do not allow the water supply hose to touch the power plug or outlet.
••Doing so may cause condensation resulting in a fire, electrical shock, heat or a short.

Do not do anything that may damage the power cord, power plug.
Do not strike, yank, twist, excessively bend, damage, alter, or heat the power cords.
Also, do not place anything heavy on, bind or pinch the power cords.
••Using a damaged power cord may result in a fire, electrical shock, heat or short.

Do not use a loose or faulty electrical outlet.

••Doing so may cause fire or short circuit.

Do no use any outlet or wiring equipment beyond its specified rating.

••Plugging too many plugs into the same outlet, for example using outlet splitters, can cause fire
due to heat.

Do not use any power supply other than the one specified.
AC 120 V, 60 Hz
••Doing so may cause fire or excessive heat.

Do not stick a finger or anything else into the warm air outlet.
Do not place anything on the warm air outlet or drape clothes over it.
••Doing so may cause burns, electrical shock or malfunction.

Keep cigarettes and other open flames away from the product.
••Failure to do so may cause fire.

Refrain from sitting on the seat for long periods.

••It may cause low-temperature burns.
To prevent the following persons from getting a moderate temperature burn during use, other
person should turn off the toilet seat heater.
−−Young children, the aged and other users unable to set the temperature appropriately
themselves.
−−The ill, physically disabled and others who do not have freedom of movement.
−−Those using any medicines that cause drowsiness (sleeping or cold medicine), those who have
been drinking heavily, anyone severely fatigued and anyone else liable to fall asleep.

5
 Safety Precautions (Continued)

WARNING
This is an electrical product. Do not install it anywhere water is likely to get on
the product or anywhere with humidity high enough that water is likely to form
on the surface of this product. When using the product in a bathroom, install a
fan or ventilation port and ensure good air flow through the bathroom.
••Failure to do so may cause fire or electrical shock.

Always connect the product to the cold water supply.

••Connecting to hot water supply may result in burns and equipment damage.

Make sure that a properly grounded (3 prong) outlet has been installed.
••Failure to install a grounded outlet could cause electrical shock in the event of a malfunction or
short circuit.

Insert the power plug securely into the outlet.

••Failure to do so may cause fire, heat or short circuit.

To unplug, hold the power plug, not the power cord.

Do not unplug by pulling the power cord.
••Pulling on the power cord may cause damage and result in fire or heat.

If the power cord is damaged, avoid danger by having the manufacturer's

repair department or equivalent specialist replace it.
Always unpug the power plug from the outlet before maintenance or
inspection.
••Failure to do so may cause electrical shock or malfunction.

Periodically remove dust and dirt from the power plug and make sure it is
securely plugged into the wall outlet.
••Failure to do so may cause fire, heat or short circuit.
Pull the power plug out from the outlet and wipe clean with a dry cloth.

Always unplug the power plug from the outlet before removing the main unit.
••Failure to do so may cause fire or electrical shock.

Preliminary studies in females suggest that overuse of continuous spraying

can increase the possibility of vaginal mucosa drying and potential reduction in
desirable microbial organisms.
Although these studies have not been validated, please consult your healthcare
provider for concerns regarding whether these circumstances may apply to you.
More importantly, if you are an individual suffering from any immune
deficiency as a result of disease, chemotherapy, or other medical condition
compromising the immune system you should consult your healthcare
provider before use of this product.

6
 CAUTION

Introduction
Do not use the product if the main unit is unstable.
••Doing so may cause the main unit to come loose and fall, resulting in injury.

If the product is damaged, do not touch the damaged section.

••Doing so may cause electrical shock or injury.
Replace it immediately.

Do not apply strong force, mechanical shock, step on or stand on the toilet
seat, toilet lid or main unit. Also do not place any heavy object on the toilet
seat, toilet lid or main unit.
••Doing so may cause cracking or cause the main unit to come loose and fall, resulting in injury.
••Doing so may damage the product and cause injury or water damage.

Do not lift up this product by the toilet seat or lid.

Do not raise the toilet seat or lid while objects are resting on top of the unit.
••Doing so may cause the main unit to come loose and fall, resulting in injury.

When maintaining the plastic parts (main unit etc.) or the water supply hose,
use a pH neutral kitchen detergent diluted with water. Do not use any of the
following.
Toilet cleaner, household cleaner, benzene, paint thinner, powdered cleanser or nylon
scrubbing brush.
••These items may damage or crack the plastic and cause injury or malfunction.
••These items could damage the water supply hose and cause a water leak.

To prevent a sudden water leak, do not remove the water filter drain valve
when the shutoff valve is open.
••Doing so will cause water to spurt out.
(Refer to Page 34 for instructions on cleaning the water filter drain valve.)

Do not fold or crush the water supply hose; do not damage by cutting with a
sharp object.
••Doing so may cause water leaks.

Do not install the base plate, which is not attached.

••Doing so may cause damage.

7
 Safety Precautions (Continued)

CAUTION
If a water leak should occur, always close the shutoff valve.

When the ambient temperature is likely to drop to 32 °F (0 °C) or lower,

prevent damage to the pipes and hoses due to freezing.
••Frozen water pipes could cause the main unit and the pipes to break, resulting in a water leak.
••Regulate the room temperature to prevent the pipes and hoses from freezing during cold months.
••Drain the water.

When not using the product over an extended period of time, drain the
water out of the main unit and the water supply hose after closing the water
shutoff valve, and pull the power plug from the outlet.
••When using the product again, allow the product to refill with water first. Otherwise, the water in
the tank might become contaminated and cause skin inflammation or other problems.
(Refer to Page 37 for instructions on replenishing the water.)
••Leaving the power on may cause fire or heat.

When installing the water filter drain valve, make sure that it is securely
tightened in its proper position.
••Failure to securely tighten it may cause a water leak.

Push the main unit securely on to the base plate.

••After pushing the main unit until a click sound is heard, pull it slightly toward you to make sure
that the product does not detach.
••Doing so may cause the main unit to come loose and fall, resulting in injury.

8
 DANGER To reduce the risk of electrocution:

Introduction
1. Do not use while bathing.

2. Do not place or store the product where it can fall or be pulled into a tub or sink.

3. Do not place in or drop into water or other liquid.

4. Do not reach for the product when it has fallen into water. Unplug it immediately.

WARNING To reduce the risk of burns, electrocution, fire or injury to persons:

1. Close supervision is necessary when this product is used by, on, or near children or
invalids.

2. Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.

3. Never operate this product if it has a damaged cord or plug, is not working properly, has
been dropped or damaged, or has been dropped in water. Return the product to a service
center for examination and repair.

4. Keep the cord away from heated surfaces.

5. Never block the air openings on the product or place it on a soft surface, such as a bed
or couch, where the air openings may be blocked. Keep the air openings free of lint, hair,
and other similar items.

6. Never use while sleepy or drowsy.

7. Never drop or insert any object into any opening or hose.

8. Do not use outdoors. Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.

9. Connect this product to a properly grounded outlet only.

See "Grounding Instructions" in Page 10.

10. The tank should be filled with water only.

••Servicing should be performed by an authorized service representative.

••This product is for household use.

9
 Safety Precautions (Continued)

Grounding Instructions
This product should be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electrical current.

This product is equipped with a cord having a grounding wire with a grounding plug.

The plug must be plugged into an outlet that is properly installed and grounded.

DANGER - Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire
to either flat-head terminal.

Check with a qualified electrician or serviceman if the grounding wire instructions are not
completely understood, or if in doubt as to whether the product is properly grounded.

SAVE THESE INSTRUCTIONS

10
Operational Precautions
■■For prevention of malfunctions ■■For prevention of malfunctions and failures
<About the seat switch> ●
●Disconnect the power plug if there is a risk of

Introduction
lightning.
●
●When you sit on the toilet seat, the seat switch
turns ON, enabling you to use various features. ● toilet seat cover or a
●A
(A click sound is heard when the seat switch is toilet lid cover cannot
Covers
ACTIVATED.) be used.
(The seat switch may
not function properly.
Additionally, the toilet
seat and lid may
not open or close
Switch properly.)
ON
Gap ● not urinate on the main unit, toilet seat or wand.
●Do
The toilet seat lowers. (Doing so may cause a failure or discoloration.)

Seat switch (Built-in)

● not apply strong forces to the control panel.
●Do
●
●When using a toilet cleaner to clean the toilet, rinse
it off within 3 minutes and leave the toilet seat and
● back on the toilet seat.
●Sit toilet lid open.
•• The seat switch will not turn on unless you (If vapor from a toilet cleaner enters the main unit,
sit on the seat properly. it may cause a malfunction.)
•• Wipe off any cleaner that remains on the bowl
unit.
● not use the product with the toilet lid removed.
●Do
● not expose to direct sunlight.
●Do
(Doing so may cause changes in color, irregular
heated seat temperature, the control panel
malfunction or product malfunction due to the
Note change in temperature.)
•• When a child uses the product, the seat ●
●Use radios, etc. away from the product.
switch may not be ACTIVATED by their (The product could cause interference with the
light body weight. radio signal.)
•• Since the toilet seat is designed to move ● you use a booster seat for infants or a soft
●If
up and down, a clearance is provided highchair, remove it after use.
between the toilet seat cushion and the (Keeping it installed may prevent some of the
bowl unit. functions from being used.)
● not place anything on the toilet seat and lid,
●Do
■■For prevention of damage and do not press them with hands.
●
●Wipe plastic areas such as the main unit with a (Failure to do so may turn on the seat switch,
soft cloth tightly wrung out with water. causing the floor to get wet if buttons on the control
panel are touched and warm water comes out from
the wand.)

Dry cloth or tissue

● not lean against the toilet lid.
●Do

11
 Parts Names

Toilet lid cushions

Toilet lid
Model No., etc

Wand cover
Seat switch
(Built-in)
Warm air outlet cover

Water supply hose

Wand
Power Plug

Shutoff valve*1
(Page 14)

Power cord

Control panel Heated seat

(Page 17)

Descriptions in this manual are based on the illustrations of SW3074.

The toilet seat and the toilet lid shape vary by model.
*1 The shape and location vary depending on the type of toilet bowl and tank.
*2 Except SW3024, SW3023

12
 Main display Right side of the main unit

Introduction
Power LED

Seat LED
Deodorizer outlet*2
Energy saver
LED

Water LED

Wand CLEAN
LED*2 Main unit removal button
Deodorizing filter *2 (Pages 30, 31)
<All the LEDs illuminate in the figure> (Page 33)

Toilet seat
cushions

Left side of the main unit

Water filter drain valve (Page 34)

Water drain plug (Page 37)

13
 Preparation Using the Product for the First Time

1. Turn on the power 2. Open the shutoff valve

1 Insert the power plug.

••The wand extends and then retracts.
1 Fully open the shutoff valve.

2 Check the "Power" LED

illuminates.
••When the "Power" LED does not light,

press for at least 3 seconds.

<Power>

Shutoff valve

14
Introduction

15
 Basic Operation Mechanism of Auto Functions
(SW3074T40, SW3074, SW3073)
"EWATER+" is used automatically to clean the wand.
As you approach As you sit As you stand up *1

0
(sec) 10 25

Deodorizer
Starts After about 10 seconds
the deodorizer
Starts the auto
Removing odors inside the bowl unit. power deodorizer

●Deodorizing filter needs regular It stops after about 60 seconds.

maintenance. (Page 33)

Auto wand CLEAN

Only when the washing functions are used.

After about 25 seconds

The wand extends to clean
itself with "EWATER+" that
comes out of the base *2
Pre-mist

Pre-mist

A mist is automatically sprayed inside the bowl

unit to make it more difficult for dirt to adhere.

The above are default setting What is meant by "EWATER+" ?

functions.
"EWATER+" helps the self-cleaning wand feature work effectively
●●These may be changed.
and by preventing the accumulation of dirt that can cause stains.
→"Various Operations" ••"EWATER+" is generated from chemicals already present in potable water.
(Pages 24 - 27) ••"EWATER+" helps to minimize dirty surfaces, but does not make cleaning
unnecessary.
••The effect of rinsing with "EWATER+" can vary depending on the frequency
Auto wand CLEAN of toilet use and other conditions.
During
"Auto wand CLEAN" "EWATER+" can also be used by pressing the button on
or "Wand CLEAN" the control panel.
■
■Wand

Flashes Press

(After wand cleaning, water comes out from around the wand.)
● clean the wand with it extended.
●To "Wand cleaning" (Page 33)

*1 To keep clean the wand every time it is used, water remaining in the wand is drained after you stand up from the toilet seat.
*2 When the washing functions (Rear washing and Front washing etc,) have not been used in 8 hours, the wand is cleaned
automatically. (Water comes out from around the wand.)
16
 Using the Control Panel

"Rear "Rear soft washing"*3 "Oscillating washing"

Washing washing" • Washes your rear with mild water • When you press this button
pressure. again during use, the wand
• Washes your rear.
"Front washing" moves back and forth to
wash your rear thoroughly.
• Serves as a bidet for ladies.

Drying
"Warm air drying"
• Dries your rear.

Stopping
"Stop"
• Stops the

Operation
operation.

■ "Power deodorizer"*3
Pressing the button increases the deodorizer power
• This button is only enabled when sitting on
the toilet seat.
• When you stand up without turning the button
off, it automatically stops after about 60 seconds.

■ "Power ON/OFF"
• Pressing it about 3 seconds or longer turns the
power on/off.

˂The drawing is SW3074˃ Temperature setting, Temperature adjustment LED (Page 18) Main display
• Adjust temperatures (Page 13)

■ "Wand CLEAN"*3 (Page 16)

Cleans the wand with "EWATER+".
• This function will operate automatically after using
the washing functions (Rear washing, Front
washing, etc.). (Page 16)
*3 Except SW3024, SW3023

● Functions that operate ■ "Pulsating washing"

when a button is Washes with the water pressure pulsating between soft and strong.
pressed during "Rear ■ "Wand position adjustment"
washing", "Rear soft ■ "Water pressure adjustment" You can adjust the washing position as desired to 5
washing" or "Front You can adjust the water different points.
washing". pressure to one of five levels. • The washing position returns to the standard position
• The PRESSURE LEDs illuminate (3rd point) when you stand up from the toilet seat.
Note when you sit on the toilet seat.
• Sitting back on the toilet seat makes it easier to adjust the wand position and to reduce splashing.

For your information

• Water may sometimes come out from around the wand when it expands in the warm water tank, but this is normal.
• As the warm water tank of hot-water system is used, the temperature of warm water may become lower if it is continuously
consumed.
17
 Temperature Adjustment Toilet Seat, Warm Water, Drying
Three different temperature levels (High, Medium, Low) and "OFF" setting can be selected.

˂The drawing is SW3074˃

Toilet seat temperature button
Displaying the temperature level of the pressed button (When you want to adjust the toilet seat temperature)
Warm water temperature button When the seat temperature and the warm water
(When you want to adjust the warm water temperature) temperature are set

Drying air temperature button

(When you want to adjust the drying air temperature)
<Seat>

Lit

<Water>

Adjusting the temperature

1 Choose and press the button of the temperature that you want to set

from the , , .
• The current temperature level appears.

2 Press the button selected in step

temperature level illuminates.
1 repeatedly until a desired
The setting changes each time the button is pressed once

"OFF" "Low" "Medium" "High"

Lit
OFF Lit
Lit

The "Drying" cannot be turned "OFF".

If the button is not pressed for about 10 seconds, the "Temperature adjustment" LED will go off, but the setting will be retained.
If the "Temperature adjustment" LED goes out before the setting is completed, start all over again at step 1.

<Settings complete>
●When the toilet seat does not get warm, or when the warm water is not warm enough, even after temperature adjustment.
➞Is the "Energy saver" set to "ON"? (Pages 20, 21)
18
 When the seat temperature and the warm water
temperature are turned "OFF"

Operation
<Seat>

OFF

<Water>

To turn the warm water temperature and toilet seat temperature "OFF"
●The "Drying" cannot be turned "OFF".

1 Select a temperature button you want to turn "OFF"

from , and press it.

••The current temperature level appears.

2 Press the button selected in step

level is set to "OFF".
1 repeatedly until the temperature
The setting changes each time the button is pressed once

"OFF" "Low" "Medium" "High"

Lit
Lit
OFF
Lit
( All
LED's )

<Settings complete>

19
 Energy Saver Features Type
"Auto energy saver" or "Timer energy saver" can be selected.
To save energy, lower (or turn "OFF") the seat or warm water temperature.

You want to save energy only

You want the product to save
for a preset duration of time.
energy automatically.
(6 hours, 9 hours)

Auto energy saver Timer energy saver

The product detects time periods with Once the time is set, the toilet seat
infrequent use and lowers the toilet seat heater and warm water heater will be
temperature automatically. turned off automatically every day at
●●It takes about 10 days for the that same time.
product to determine the periods
when it is used relatively less
frequently.

When energy OFF

saver is in OFF
operation Lit

■■Main display Lit (Orange) Lit (Green)

Lit OFF

■■Toilet seat heater

■■Warm water heater OFF

Low Set*1
temperature temperature OFF

Example When used infrequently from 9 pm to 6 am When set from 8 am to 5 pm

0 am 6 am 9 pm 0 am 8 am 5 pm
Set temperature*1
Low temperature*2
OFF*3

20
 You want to save the maximum Energy saver is on
amount of energy possible?
<Power>

<Seat>

Timer energy saver Lit

<Energy saver>
+ (Green)

Auto energy saver

<Water>

Operation
Energy saver is off
When both "Timer energy saver" and "Auto <Power>
energy saver" are set, "Auto energy saver"
operates when "Timer energy saver" is not <Seat>
operating.
OFF <Energy saver >

<Water>

●
●During "Auto energy saver":
Same LED indication as "Auto energy saver"

●
●During "Timer energy saver":
Same LED indication as "Timer energy saver"

●
●Even if the energy saver is being activated (with the
toilet seat heater set to "Low" or "OFF," or with the
Low OFF Set*1 OFF warm water heater set to "OFF"), the toilet seat will be
temperature temperature temporarily heated when you sit on it. (To reach the setting
temperature, the toilet seat takes about 15 minutes and the
warm water about 10 minutes, respectively.)
When "Timer energy saver" and
(The LED indication on the main display returns to the
"Auto energy saver" are used together
state for when the energy saver is on.)
0 am 6 am 9 pm
*1 The toilet seat temperature settings on pages 18, 19.
*2 The time period when the toilet seat heater is set to a "Low".
The warm water heater is "Set temperature".
*3 T he time period when the toilet seat heater and warm water

▶
heater are "OFF".
8 am 5 pm

To set energy saver Pages 22, 23

21
 Energy Saver Features How to Set

Auto energy saver button

˂The drawing is SW3074˃ Timer energy saver button

<Energy saver>

When energy saver is set, the "Energy saver" LED (green) illuminates.

22
Auto energy saver Timer energy saver

●
●Set the Energy saver at the time you want to start it.
Example: To save energy from 1 am to 7 am (for 6 hours)

1 1
When the time of the day reaches
1:00 am at night,
Press .
Press .

Operation
••Press the "Timer energy saver" button
repeatedly until the "6" LED illuminates.

The setting changes each time The setting changes each time
the button is pressed once the button is pressed once

When set to For 6 hours

"Auto energy saver"

Lit
Lit
(Green)

For 9 hours
When set to "OFF"

Lit
OFF

When "OFF"

OFF

<Settings complete> <Settings complete>

23
 Various Operations Setting List

Setting Types Available Settings

• Bold: Initial settings

Auto wand CLEAN ON / OFF

Pre-mist ON / OFF
Auto Cleaning
functions Features
Deodorizer ON / OFF

Auto power deodorizer ON / OFF

Check first! ˂The drawing is SW3074˃

Buttons used for setting

Stop button Front washing button Power deodorizer button Toilet seat temperature button

Warm water temperature button Wand cleaning button

24
 Applicable How to Set
Settings
Models Ref. Page

• Set whether or not to clean the wand automatically

Page 26
• Set whether or not to spray mist in the bowl unit
automatically SW3074T40
SW3074
• Set whether or not to deodorize automatically after sitting SW3073
on the toilet seat

Operation
Page 27
• Set whether or not to power deodorize automatically after
standing up

LED indication during setting

[When the "Stop" button is pressed for at least 10 seconds]

All control panel LEDs flash *1

*1 During setting, if the next button is not pressed within about 60 seconds, the light will stop flashing.
If you fail to complete the setting, redo from the step 1.

25
 Various Operations Auto functions

Cleaning Features

Set whether or not to clean the wand Set whether or not to spray mist in the bowl
automatically unit automatically

Auto wand CLEAN*1 Pre-mist

1 Press (for about 10 seconds) until all

control panel LEDs flash.

2 Press

at the same time.

and
2 Press and

at the same time.

The setting changes each time The setting changes each time
the button is pressed once the button is pressed once
Set whether or not to clean the wand Set whether or not to spray mist in the bowl
automatically unit automatically
When set to "ON" When set to "spray"
Main display Main display
Flashes
(Orange)

Flashes

When set to "OFF"*1 When set to "do not spray"

Main display Main display
OFF

OFF

3 Press .

<Settings complete>

*1 When "Auto wand clean" is set to "OFF", the "Wand CLEAN" LED turns off.
26
 Cleaning Features

Set whether or not to deodorize automatically Set whether or not to power deodorize
after sitting on the toilet seat automatically after standing up

Deodorizer Auto power deodorizer

1 Press (for about 10 seconds) until all

control panel LEDs flash.

Operation
2 Press .
2 Press .

The setting changes each time The setting changes each time
the button is pressed once the button is pressed once
Set whether or not to deodorize Set whether or not to power deodorize
automatically after sitting on the toilet seat automatically after standing up
When set to "ON" When set to "ON"
Main display Main display
Flashes
(Green) Flashes

When set to "OFF" When set to "OFF"

Main display Main display
OFF
OFF

3 Press .

<Settings complete>

27
 Maintenance Power Plug

Power Plug (Approximately once a month) WARNING

Always unplug the power plug from
the outlet before maintenance or
inspection.
(Failure to do so may cause electric shock
or malfunction, resulting in a breakdown.)

Dry cloth Wet cloth

For safety, unplug the power
1
Unplug the power plug and
plug before maintenance.*1 *2
wipe it with a dry cloth.

The "Power" LED

is unilluminated.
Lit OFF

2
Insert the power plug.
••The "Power" LED illuminates.

WARNING
●● Periodically remove dust from Main Unit
the blades and other parts of the
power plug.
•• Unplug the power plug and wipe it
with a dry cloth.
●● Fully insert the power plug.
●● When unplugging the power plug,
hold the main body of the power
plug.
•• Pulling the power cord may
damage the power plug or power
cord.

Do not use a dry cloth

or toilet paper on plastic
parts.
(May cause damage.)

*1 Except when using "Wand cleaning".

*2 Remove the power plug from the outlet to cancel timer
energy saver settings. Set them again. (Page 23)
(The "Timer energy saver" LED for the set time
flashes to notify you.)

28
Main Unit

Main Unit (Approximately daily)

Soft cloth ••Toilet paper

soaked in water ••Dry cloth
••Nylon scrubbing brush
(May cause damage)

1 Unplug the power plug.

2 Wipe with a soft cloth that has been soaked in water and wrung out
thoroughly.
■■For heavy dirt
••Wipe with a soft cloth soaked in diluted, pH neutral kitchen detergent, and then wipe with a soft cloth
soaked in water.

••Paint thinner

Maintenance
••Benzene
PH neutral kitchen detergent ••Powdered cleanser

3 Insert the power plug.

••The "Power" LED illuminates.

Attention!
●
●This product is an electric appliance. Be careful not to let water seep inside or leave detergent in the gap
between the main unit and bowl unit. (May damage plastic parts or cause a malfunction.)
●
●When using a toilet cleaner to clean the toilet, rinse it off within 3 minutes and leave the toilet seat and toilet
lid open.
••Wipe off any cleaner that remains on the bowl unit.
(If vapor from a toilet cleaner enters the main unit, it may cause a malfunction.)
● not push or pull the covers around the wand with undue force.
●Do
(May cause damage or malfunction.)
●
●Wipe the back surface of the toilet seat and the toilet seat cushions with a soft cloth tightly wrung out with
water.
(Otherwise adhesion of dirt may result in discoloration.)

29
 Maintenance Gap between the Main Unit and Bowl Unit
[SW3074T40]

Gap between the Main Unit and Bowl Unit (Approximately once a month)
You can remove the main unit to clean the top
of the bowl unit and the bottom of the main unit.

Soft cloth soaked Toilet paper, etc.

in water (May cause damage.)

1 Unplug the power plug. If the power is not unplugged,

the product may malfunction or
cause a failure or electric shock.

2
Remove the main unit.
••Do not pull the unit with undue force. (because the water supply hose and power cord are attached.)
(1) Pull the main unit toward you while pressing (2) Lift up the main unit.
the "Main unit removal button".
••Do not excessively bend the water supply hose.
Water supply hose Top of the bowl unit
Power cord Base plate
Bolt

Main unit
removal button

3 Clean the top of the bowl unit and the bottom of the main unit.
••Wipe with a soft cloth soaked in a diluted, pH neutral kitchen detergent. Then, dry the surface with
a soft cloth soaked in water so that no detergent remains.

4
Mount the main unit.
(1) Lift the main unit, then lower it straight down while threading the power
cord and water supply hose into the recess on the bowl unit.
••Be careful not to pinch the power cord.
••Do not excessively bend the water supply hose

(2) Align the main unit with the center of the base plate and press it
firmly onto the base plate until a click sound is heard. Base plate Click
CAUTION
Push the main unit firmly on to the base plate until a
click sound is heard.
(Doing so may cause the main unit to come loose and fall,
resulting in injury.)

After mounting, check that the main unit does not

detach even when pulled.

5 Insert the power plug.

••The "Power" LED illuminates.

30
[SW3074, SW3024, SW3073, SW3023]

Gap between the Main Unit and Bowl Unit (Approximately once a month)
You can remove the main unit to clean the top
of the bowl unit and the bottom of the main unit.

Soft cloth soaked Toilet paper, etc.

in water (May cause damage.)

1 Unplug the power plug. If the power is not unplugged,

the product may malfunction or
cause a failure or electric shock.

2
Remove the main unit.
Water supply hose Top of the bowl unit
••Do not pull the unit with undue force.
Power cord Base plate
(because the water supply hose and
power cord are attached.) Bolt

Main unit
removal button

Pull the main unit toward you while

Maintenance
pressing the "Main unit removal button".

3
Clean the top of the bowl unit and the bottom of the main unit.
••Wipe with a soft cloth soaked in a diluted, pH neutral kitchen detergent. Then, dry the surface with
a soft cloth soaked in water so that no detergent remains.

4 Mount the main unit.

Click CAUTION
Push the main unit firmly on to the
base plate until a click sound is heard.
(Doing so may cause the main unit to come
loose and fall, resulting in injury.)

After mounting, check that the main

unit does not detach even when pulled.
Align the main unit with the center of the
base plate and press it firmly onto the base
plate until a click sound is heard.

5
Insert the power plug.
••The "Power" LED illuminates.

31
 Maintenance Gap between the Main Unit and the Toilet Lid

Gap between the Main Unit and the Toilet Lid (Approximately once a month)
The toilet lid can be removed for
thorough cleaning.

Soft cloth soaked Toilet paper, etc.

in water (May cause damage.)

1 Unplug the power plug.

Removing and Reinstalling

2 Remove the toilet lid.

Slightly tilt the toilet lid to the front.
Hold with
both hands
↓
: Pull the left side outward.
↓
: Disconnect the hinge from the recess
and pull up.
↓
: Disconnect the right side.

3
Wipe with a soft cloth that
has been soaked in water
and wrung out thoroughly.

4 Reinstall the toilet lid.

: Join the pin and the hinge on the
right side.
↓
Slightly tilt the toilet lid to the front.
↓
: While pulling out the left side, Pin
↓
: Mount by joining the hinge with the
recess. Recess
* Be careful not to pinch your fingers.
Hinge

5 Insert the power plug.

••The "Power" LED illuminates. Hinge

6 Open and close the toilet lid

to check the reinstallation.

32
 Deodorizing Filter Wand

Deodorizing Filter (Approximately once a month) *1

1 Unplug the power plug.

2
Remove the deodorizing Deodorizing Filter

filter.
••Hold the tab and pull outward.
••Do not pull with undue force.
(Doing so may cause damage or
malfunction.) Tab

3
Clean with a tool such as a
toothbrush.
••When washing with water, dry off all Deodorizing Filter
water before reinserting.
Toothbrush, etc.

4 Reinsert the deodorizing

filter.

5
Insert the power plug. Push firmly until a click
••The "Power" LED illuminates. sound is heard.

Maintenance
Wand (Approximately once a month)
<If you notice dirt (Wand cleaning)>

1 Press
••The wand extends
. Wand

and water flows out for

cleaning.
••The wand automatically Soft cloth Toilet paper, etc.
retracts after about (May cause damage.)
5 minutes.

2
Wipe with a soft,
wet cloth.
••Do not pull, push or press the
wand with excessive force.
(May cause damage or
malfunction.)

3 Press
••The wand retracts.
.

*1 Except SW3024, SW3023

33
 Maintenance Water Filter Drain Valve

Water Filter Drain Valve (Approximately once every 6 months)

<If you think the water pressure has weakened>

1 Close the shutoff valve.

••The water supply stops.

CAUTION
Do not remove the water filter drain valve while
the shutoff valve is open. Shutoff valve
(Otherwise, water may leak out)

2 Press
and then press
to extend the wand,
again to return
the wand.
(Release the pressure from the water supply pipe.)

3 Unplug the power plug.

Water filter drain
Water filter drain valve

valve

4
Remove the water filter drain
valve.
••Loosen the water filter drain valve with
a flat-head screwdriver and then pull it.

Flat-head screwdriver

5 Clean with a tool such as a toothbrush.

••Also, remove any dust from inside the hole of the water filter drain valve.

6
Reinstall the water filter drain
valve.
••Insert the water filter drain valve and
use a flat-head screwdriver to tighten it
securely.

7 Insert the power plug.

••The "Power" LED illuminates.

8 Open the shutoff valve. (Page 14)

34
What to Do?
If the water does not flow due to a water service interruption

If the water does not flow due to a water service interruption

Make sure to also check the instruction manual of your bowl unit.

1 Use a bucket to flush water. Large bucket

Pour strongly,
aiming at the center

2 If the water level is low after

flushing, add more water.
of the bowl unit.

(Until the water level does not rise)

••Prevents odors.

Newspaper,
Attention! dust cloth, etc.
••When the water supply is restored, be sure to perform
a flush.
(To prevent waste from remaining in the drain pipe.)

Reference

35
 What to Do? Freeze Damage Prevention

When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, take measures to prevent freezing.
Attention!
••When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, do not use the energy saver feature.
(May damage the product.)
••Warm the bathroom or take measures against freezing so that the ambient temperature does not drop below 32 °F (0 °C).

How to freeze damage prevention

1
(2) [Applicable to SW3074, SW3024,
Close the shutoff valve. (Page 34) SW3073, SW3023 only]
••The water supply stops. ••Drain the water from the water supply hose.

CAUTION
Do not remove the water filter drain valve Water supply hose
while the shutoff valve is open.
Horizontally
(Otherwise, water may leak out)

2 Drain the water from the toilet

tank. (3) When water draining is completed, reinstall
the water filter drain valve.
••Manipulate the lever/button/etc. until the
water stops. ••Insert the water filter drain valve and use a
flat-head screwdriver to tighten it securely.

3 Press to extend the

wand, and then press
again to return the wand.
(Release the pressure from the water supply pipe.)

4 Unplug the power plug. 6 Insert the power plug.

••The "Power" LED illuminates.

5 Drain the pipe.

7 Set the water and toilet seat
temperature to "High". (Page 18)
(1) Remove the water filter drain valve.
••Loosen the water filter drain valve with a flat- ••To maintain the temperature, close the toilet seat
head screwdriver and then pull it. and toilet lid after finishing work.

■■To use the product again

••The water needs to be resupplied. (Page 37)

Water filter drain valve

Flat-head
screwdriver

36
 Long Periods of Disuse

If the toilet is in a location you will not visit for a long time, drain the water.
(Failure to do so may cause breakdown or skin irritation due to polluted product tank water.)

How to drain the water

1 Drain the water from the toilet tank.

(Page 36 Step 1 2 )
6 Tighten the water drain plug
securely with a flat-head
screwdriver.
2 Press to extend the
wand, and then press
again to return the wand.
(Release the pressure from the water supply pipe.)

3 Unplug the power plug. ■■If water may get frozen

••Add antifreeze solution to the water in the bowl to

4
prevent freezing.
Drain the pipe. (Page 36 Step 5 ) (The antifreeze solution should not be flushed out.
Collect it before using the toilet and dispose of it.)
Loosen the water drain plug until water
5 comes out from around the wand.
■■To use the product again
••The water needs to be resupplied. (See below)
••Water comes out from around the wand.
(It takes about 3 minutes to complete draining.)
* The water drain plug cannot be removed.

Water drain plug

Flat-head screwdriver

Resupplying the Water

1 Open the shutoff valve.
••Check that water is not leaking from a pipe or the main unit.

2
If the power is not on,
Insert the power plug.
Reference

••The "Power" LED illuminates.

Paper cup

3 Discharge water from the wand.

(1) Pressing down the left side of the toilet seat,
(2) Press "Rear washing" button on the control panel to discharge water from
the wand for about 2 minutes.
••It takes about 1 minute maximum before water comes out.
••Catch the water in a paper cup or other receptacle. Soft cloth soaked in water
(3) Press the "Stop" button on the control panel. (to prevent scratching)
■■If the remaining water has frozen and no water comes out
••Heat the inside of the bathroom, and warm the water supply hose and shutoff valve using a cloth soaked in warm water.
37
 Troubleshooting
First, try the actions described on pages 38 - 41.
If the problem persists, consult the installer, seller, or CAUTION
TOTO customer service.
(see contact information on the back cover.) If a water leak occurs, close
the shutoff valve.

Shutoff valve

Please check first

■■Is the breaker on the distribution board turned on?
→Check whether there is a power outage or the breaker has turned
Is the Power LED "OFF".

illuminated? ■■Is the "Power ON/OFF" setting "OFF"?

→Switch it to "ON" with the control panel. (Page 14 Step1- 2)
■■Is the "Power" LED on the main display flashing?*1
→The main unit is not mounted properly. Mount them correctly
again. (Pages 30, 31)

<Power>

■■W
 hile the LED is illuminated, energy saver (Pages 20, 21)
is in operation, so the toilet seat temperature may be
Is the Energy saver reduced or the warm water heater and toilet seat heater
LED illuminated? may be turned off.

38
 Rear washing, Rear soft washing*1, Front washing and Wand
Ref.
Trouble Please check Page

●●Has the toilet been sat on and used continuously for 2 hours or longer? (If so,
operation is stopped for safety purposes.) -
➞Stand
➞ up from the seat and then use again.

●●The seat switch will not turn on unless you sit on the seat properly.
11
➞ back on the toilet seat.
➞Sit

The wand ●●Are you using a toilet seat cover, a toilet lid cover or
(or washing water) a seat for infants? Covers
does not come out ➞Remove
➞ any covers. 11
When using a seat for infants or a soft highchair,
remove after each use.

●●Are you pressing "Wand CLEAN" button?*1

•• When you press "Wand CLEAN" button, "EWATER+" comes out from the
vicinity of the wand to clean the wand.
➞ clean the wand with it extended, perform "Wand cleaning".
➞To 33
●●Has a water failure occurred?
➞Press
➞ "Stop" button on the remote control and wait until water service is -
restored.

●●Is the shutoff valve closed?

The wand extends but 14
➞Fully
➞ open the shutoff valve.
the washing water
does not come out / ●●Is the water filter drain valve clogged with foreign matter?
34
The washing water ➞Clean
➞ the filter.
pressure is weak
●●Is the water pressure set to a low level? 17

●●Is the water drain plug loosened?

37
➞Tighten
➞ the water drain plug securely.

●●Is the warm water temperature set to "OFF" or a low level? 18

●●When the temperature of the water supply or the bathroom is low, the water
temperature may be low when first sprayed.
-
●●Is the timer energy saver in operation?
The washing water is
•• The energy saver feature is on when the "Energy saver" LED is on and the
cold "Power" LED is off on the main display.
When you sit on the seat, the warm water heater is temporarily turned on
20, 21
and water is warmed in about 10 minutes.
➞When
➞ the timer energy saver is set to "ON", you can also turn it "OFF". 23
●●"Rear washing", "Rear soft washing"*1 and "Front washing" stop automatically -
after 5 minutes of continuous use.
Wash functions
●●Does the seat switch have difficulty detecting?
stop unintentionally
Reference

➞ back on the toilet seat. If you get up slightly from the seat, or sit forward
➞Sit
during use on the seat, the seating switch may temporarily stop detecting your 11
presence.

Water comes out ●●Water may sometimes come out from around the wand when it expands in -
the warm water tank.
unexpectedly from ●●Is the "Wand CLEAN" LED on the main display flashing?*1
the wand ➞"Auto
➞ Wand CLEAN" starts and the wand is being cleaned. 16
*1 Except SW3024, SW3023

39
 Troubleshooting
Warm air drying
Ref.
Trouble Please check Page

The dryer
●●Is the dryer temperature set to low level? 18
temperature is low
●●The feature stops automatically after about 10 minutes of continuous use. -
Stops in the middle ●●Does the seat switch have difficulty detecting?
of use ➞ back on the toilet seat. If you get up slightly from the seat, or sit forward on
➞Sit 11
the seat, the seating switch may temporarily stop detecting your presence.

Toilet Seat and Toilet Lid

Ref.
Trouble Please check Page

●●Is the toilet seat temperature set to "OFF" or a low level? 18

●●Is energy saver in operation?

•• The energy saver feature is on when the "Energy saver" LED is on and the
20, 21
"Power" LED is off on the main display.
When you sit on the seat, the toilet seat heater is turned on temporarily and
the seat is warmed in about 15 minutes.
The toilet seat is ➞You
➞ can turn it "OFF" if the energy saver feature is "ON". 23
cold ●●Have you been seated for a long time?
•• After about 20 minutes of sitting, the temperature starts reducing, and after -
about 1 hour, the toilet seat heater is turned "OFF".
➞Stand
➞ up from the seat and then use again.
●●Did you put anything on the toilet seat or the toilet lid?
➞Remove
➞ anything placed on top of the toilet seat or lid.
-

●●Is a toilet lid or seat cover installed?

11
➞Remove
➞ any covers.

Energy Saver
Ref.
Trouble Please check Page

●●Did you unplug the power plug or was there a power outage?
The timer energy saver •• The setting is cancelled. ➞ Set them again.
23
feature is not working (When the power is turned off once, the "Timer energy saver" LED flashes to
notify you.)

●●Because this function takes several days learning the usage conditions before
The auto energy saver starting energy saver, the amount of energy saving may be low, depending on
feature is not working the frequency of use.
➞Check
➞ the energy saver setting. 20, 21

Deodorizer*1
Ref.
Trouble Please check Page

●●Is "Deodorizer" set to "OFF"? ➞ Set to "ON". 27

●●Even after sitting down, you do not hear operation sounds.
The deodorizer seems
➞ back on the toilet seat.
➞Sit -
to be not working If you hear an operation sound when you sit on the toilet seat.
➞Clean
➞ the deodorizing filter. 33

40 *1 Except SW3024, SW3023

 Deodorizer*1
Ref.
Trouble Please check Page

●●Are you using an air freshener or deodorizer that you purchased separately?
A strange odor is
•• Doing so may reduce the effectiveness of the product's deodorizer or cause strange odors.
emitted ➞Remove
➞ the air freshener or deodorizer. -

The auto power deodorizer ●●Is "Auto power deodorizer" set to "OFF"? ➞ Set to "ON". 27
feature is not working ●●It starts about 10 seconds after you stand up from the toilet seat. -

Sanitary*1
Ref.
Trouble Please check Page

The Wand CLEAN ●●If the "Wand CLEAN" LED does not illuminate, it is time to replace the component
LED does not that generates "EWATER+". Consult the installer, seller, or TOTO customer -
illuminate service. (see contact information on the back cover.)

Others
Ref.
Trouble Please check Page

●●If the nut of the connecting pipe is loosened, retighten it by hand. (Do not use any tool.)
Water is leaking from the
➞If➞ the water leak does not stop, close the shutoff valve and consult with
plumbing connections TOTO customer service. (see contact information on the back cover.)
-

●●There is clearance between the toilet seat cushion and the bowl unit for activating the seat
11
The main unit is switch. When you sit on the toilet seat, the toilet seat subsides slightly to activate the seat switch.
unstable ●●Are the bolts that anchor the main unit loose?
30, 31
➞Remove
➞ the main unit and then firmly tighten the base plate bolts.

When sitting on the toilet seat

●●When "Pre-mist" is "ON", you hear operation sounds for preparing the pre-mist
16
or spraying mist in the bowl unit.
➞You
➞ can turn it "OFF". 26
When moving away from the bowl unit after use
●●When "Auto power deodorizer" is "ON", operation sounds are made while the
deodorizing power increases for 60 seconds after you stand up from the toilet seat.
The main unit makes ➞You
➞ can turn it "OFF". 27
a sound*1 ●●If "Auto wand CLEAN" is "ON" and you use the washing functions (e.g., Rear washing and
Front washing), you may hear that the wand is extended and cleaned with "EWATER+".
➞You
➞ can turn it "OFF". 26
When not using the product (e.g., at night)
Reference

●●If "Auto wand CLEAN" is "ON" and you do not use the washing functions (e.g., Rear
washing and Front washing) for about 8 hours, you will hear that the wand is cleaned
with "EWATER+" and then the remaining water is drained from inside the product.
➞You
➞ can turn it "OFF". 26
●●Did you unplug the power plug or was there a power outage?
The timer energy •• The setting is cancelled.
saver LED is flashing ➞Set
➞ them again 23
(When the power is turned off once, the "Timer energy saver" LED flashes to notify you.)

You feel air in the ●●A mist is sprayed inside the bowl unit to make it more difficult for dirt to adhere
-
bowl unit when sitting when sitting on the toilet seat. You may feel air when a mist is sprayed.
on the toilet seat*1 ➞You
➞ can turn it "OFF". 26
41
 Specifications
SW3074T40
SW3024
Item SW3074
SW3023
SW3073
Rated power supply AC 120 V, 60 Hz
Type of water heater Tank type
Power cord length 3.9 ft (1.2 m)
Water protection level IPX4
Rear washing Approx. 0.07-0.11 gal / min (Approx. 0.27-0.43 L / min)
Spray Approx. 0.07-0.11 gal / min
Rear soft washing -
volume *1 (Approx. 0.27-0.43 L / min)
Front washing Approx. 0.08-0.11 gal / min (Approx. 0.29-0.43 L / min)
Washing Water temperature Adjustable temperature range : OFF, about 95-104 °F (about 35-40 °C)
Toilet tank capacity Approx. 0.13 gal (Approx. 0.49 L)
Heater capacity 225 W
Safety device Temperature fuse, anti-idling float switch
Backflow prevention device Vacuum breaker, Check valve
Adjustable temperature range : OFF, about 82-97 °F (about 28-36 °C)
Heated Surface temperature
(Auto energy saver : about 79 °F (about 26 °C))
seat
Safety device Temperature fuse
Method O2 deodorization -
Normal mode : Approx. 3.18 ft3 / min
(Approx. 0.09 m3 / min)
Airflow volume -
Deodorizer Power mode : Approx. 5.65 ft3 / min
3
(Approx. 0.16 m / min)
Normal mode : Approx. 1.7 W,
Power consumption -
Power mode : Approx. 5.3 W
Warm air temperature *2 Adjustable temperature range : about 95-140 °F (about 35-60 °C)
Warm air Airflow volume Approx. 8.83 ft3 / min (Approx. 0.25 m3 / min)
dryer Heater capacity 347 W
Safety device Temperature fuse
Minimum required water pressure : 7.25 PSI (0.05 MPa) <dynamic>
Water supply pressure
Maximum water pressure : 108.78 PSI (0.75 MPa) <static>
Water supply temperature 32-95 °F (0-35 °C)
Working ambient temperature 32-104 °F (0-40 °C)
Weight About 11 lb (About 5 kg)
SW3074T40
SW3073
Item SW3074
SW3023
SW3024
Rated power consumption 403 W 409 W
Maximum power consumption *3 512 W 520 W
Heated
Heater capacity 48 W 54 W
seat
W 1.55 ft × D 1.74 ft × H 0.48 ft W 1.55 ft × D 1.58 ft × H 0.48 ft
Dimensions
(W 472 mm × D 530 mm× H 147 mm) (W 472 mm × D 483 mm× H 147 mm)
*1 At 29 PSI (0.20 MPa) <dynamic> water pressure.
*2 Temperature around the warm air outlet measured by TOTO.
*3 Maximum power consumption for warm water or heated toilet seat.

●When disposing of this product, please follow your local or state guidelines for proper disposal.

42
Limited Warranty
1. TOTO warrants its products to be free from defects in materials and workmanship during normal use when properly installed
and serviced, for a period of one (1) year from date of purchase. This limited warranty is extended only to the ORIGINAL
PURCHASER of the product and is not transferable to any third party, including but not limited to any subsequent purchaser
or owner of the product. This warranty applies only to TOTO product is purchased and installed in USA and Canada.
2. TOTO's obligations under this warranty are limited to repair, replacement or other appropriate adjustment, at TOTO's option,
of the product or parts found to be defective in normal use, provided that such product was properly installed, used and
serviced in accordance with instructions.
TOTO reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. TOTO
will not charge for labor or parts in connection with warranty repairs or replacements. TOTO is not responsible for the cost of
removal, return and/or reinstallation of the product.
3.This warranty does not apply to the following items:
a) Damage or loss sustained in a natural calamity such as fire, earthquake, flood, thunder, electrical storm, etc.
b) Damage or loss resulting from any accident, unreasonable use, misuse, abuse, negligence, improper care, or maintenance
of the product.
c) Damage or loss resulting from sediments or foreign matter contained in a water system.
d) Damage or loss resulting from the quality of water in the region where the product is used.
e) Damage or loss resulting from improper installation or from installation of the product in a harsh and/or hazardous
environment, or improper removal, repair or modification of the product. This includes locations where the water pressure
is above local codes or standards. (NOTE : Product model codes allow a maximum of 80 PSI. Check local codes or
standards for requirements).
f) Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the fault of TOTO or which
the product is not specified to tolerate, including failure to use the factory equipped cord and plug or use of a loose or faulty
electrical outlet or use of a current or socket other than a 120V, 60Hz electrical current from a GFI (ground, fused) socket.
g) Damage or loss resulting from normal and customary wear and tear, such as gloss reduction, scratching or fading over
time due to use, cleaning practices or water or atmospheric conditions, including but not limited to, the use of bleach, alkali,
acid cleaners, dry (powder) cleaners or any other abrasive cleaners or the use of metal or nylon scrubbers.
4. If the Danger Label which has been placed over the seams on the back of the product’s top unit is broken or otherwise not
intact, this limited warranty is void.
5. In order for this limited warranty to be valid, proof of purchase is required. TOTO encourages warranty registration upon
purchase to create a record of product ownership at http://www.totousa.com. Product registration is completely voluntary and
failure to register will not diminish your limited warranty rights.
6. If the product is used commercially or is installed outside of USA and Canada, TOTO warrants the product to be free from
defects in materials and workmanship during normal use for one (1) year from the date of installation of the product, and all
other terms of this warranty shall be applicable except the duration of the warranty.
7. This warranty gives you specific legal rights. You may have other rights which vary from state to state, province to province or
country to country.
8. To obtain warranty repair service under this warranty, you must take the product or deliver it prepaid to a TOTO service
facility together with proof of purchase (original sales receipt) and a letter stating the problem, or contact a TOTO distributor
or products service contractor, or write directly to TOTO U.S.A., INC., 1155 Southern Road, Morrow, GA 30260 (888)
295-8134 or (678) 466-1300, if outside the U.S.A. If, because of the size of the product or nature of the defect, the product
cannot be returned to TOTO, receipt by TOTO of written notice of the defect together with proof of purchase (original sales
receipt) shall constitute delivery. In such case, TOTO may choose to repair the product at the purchase'r s location or pay to
transport the product to a service facility.
WARNING! TOTO shall not be responsible or liable for any failure of, or damage to, this product caused by either
chloramines in the treatment of public water supply or cleaners containing chlorine (calcium hypochlorite).
NOTE: The use of a high concentrate chlorine or chlorine related products can seriously damage the fittings. This damage
can cause leakage and serious property damage.
Reference

THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY TOTO. REPAIR, REPLACEMENT OR OTHER
APPROPRIATE ADJUSTMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY
AVAILABLE TO THE ORIGINAL PURCHASER. TOTO SHALL NOT BE RESPONSIBLE FOR LOSS OF THE PRODUCT OR
FOR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE ORIGINAL
PURCHASER, OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL, OR COSTS OF REPAIRS
BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. IN NO EVENT WILL TOTO'S
RESPONSIBILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR USE OR
FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.

43