RV5-10 - Relief Valve

Spool, pilot operated

114 L/min (30 USgpm) • 350 bar (5000 psi)

2 Operation Features
When the inlet pressure The subsequent pressure drop High accuracy of pilot operated
exceeds the setting of the moves the spool against a light design. Hardened working
valve, the pilot section opens, spring opening a ring of radial parts give long, reliable,
causing a small flow across the holes in the sleeve, allowing trouble-free life. Cartridge
orifice in the main spool. relief flow to tank. construction for installation into
your own manifold.

Sectional View Performance Data

Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
E Rated flow 114 L/min (30 USgpm)
Internal leakage, port 1 to port 2 114 cc/min (7cu in/min @ 350 bar (5000 psi)
Cavity C-10–2
Standard housing materials Aluminum or steel
Temperature range -40° to 120°C (-40° to 248°F)
Fluids All general purpose hydraulic fluids such as:
MIL–H–5606, SAE 10, SAE 20, etc.
Filtration Cleanliness Code 18/16/13
Weight cartridge only 0,22 kg (0.48 lbs)
Seal kits – RV5 565803 Buna–N
566086 Viton®
– RV5A 565806 Buna–N
889627 Viton®
Viton is a registered trademark of E.I. DuPont
2

Description Pressure Override Curves

Cartridge only
Tank pressure = 0 Flow - L/min (21,8 cSt oil @ 49°C)
0 20 40 60 80 100
4000 280
A
Inlet pressure - bar
Inlet pressure - psi

3000 210

B
2000 140

1000 70

0 0
A - 50 spring 0 5 10 15 20 25 30
B - 20 spring Flow - USgpm (105 SUS oil @ 120°F)

Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.

E-140.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 An Eaton Brand
RV5-10 - Relief Valve
Spool, pilot operated
114 L/min (30 USgpm) • 350 bar (5000 psi)

Model Code RV5 (A) – 10 (V) – * – (S) – ** – **/ ** – 00

1 2 3 4 5 6 7 8 9 10

1 Function 7 Port Size 8 Cracking Pressure Range

RV5 2 Cage seals Code Port Size Housing Number Note: Code based on pressure
BlankA 3 Size Aluminum Aluminum Steel in psi.
10 4 Seal Material Light duty Fatigue rated Fatigue rated 3 - 3,4-20 bar (50-300 psi)
BlankV 5 Adjustment 20 - 7-140 bar (100-2000 psi)
0 Cartridge only
C FI K S 35 - 17-240 bar (250-3500 psi)
3B 3/8" BSPP 02–175462 – – 50 - 35-350 bar (500-5000 psi)
6 Valve Housing Material
2G 1/4" BSPP – 876702 02–175102
BlankS
3G 3/8" BSPP – 876703 02–175103 9 Setting pressure
6H SAE 6 – 876700 – Within ranges in 8
Blank - Normal factory setting
8H SAE 8 – 876701 – at approximate mid-range. E
6T SAE 6 566151 – 02–175100 User requested settings in
3,45 bar (50 psi) steps, Coded
8T SAE 8 – – 02–175101
as in the following examples:
H10H SAE 10* – 4997062-001 – 10 - 70 bar (1000 psi)
2K10H SAE 10** – 4997060-001 – 10.5 - 72,4 bar (1050 psi)

* Bolt on, dual cross over relief valve package for Eaton H or T series motors
10 Special features
** Bolt on, dual cross over relief valve package for Eaton 2000 series motors
00 - None
(Note:Two cartridges are installed in this special housing, both are set to the same (Only required if valve has special
crackpressurespecifiedinmodelCodeposition9,maximumallowedsettingis210 features, omitted if "00.")
bar (3000 psi), only available with RV5A option and aluminum housing.) SS - 316 Stainless Steel
See section J for housing details. external components

WARNING
• Aluminum housings
can be used for
pressures up to 210 bar (3000
Dimensions Torque cartridge in housing psi). Steel housings must be
mm (inch) A - 47-54 Nm (35-40 ft. lbs) used for operating pressures
S - 68-75 Nm (50-55 ft. lbs) above 210 bar (3000 psi).

Cartridge Only Installation Drawing (Steel)

“C”Adjustm ent
19,1 (0.75)hex

“I” Adjustm ent

“S”Adjustm ent “K”Adjustm ent,
Ø 38,1 (1.50)
“F”Adjustm ent
80,0 80.0
(3.13) (3.13)

53,0
(2.08) 19.1
25,4 (1.00)hex 2X 7.1 2 (0.175)
(0.28) 63.5
(2.50)

0.875"-14 Thd. 12.7

31,8 1 (0.5)
(1.25)
2 9.5 22.2
(0.37)
63.5 (0.87)
(2.50)
1
Ø 15,82 (0.623)

Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.

An Eaton Brand EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 E-141.A